Networking Working Group JP. Vasseur
Internet-Draft Cisco Systems, Inc
Intended status: Informational September 11, 2008
Expires: March 15, 2009
Terminology in Low power And Lossy Networks
draft-vasseur-roll-terminology-00.txt
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on March 15, 2009.
Abstract
The documents defines a terminology for discussing routing
requirements and solutions for networks referred to as Low power and
Lossy Networks (LLN). A LLN is typically composed of many embedded
devices with limited power, memory, and processing resources
interconnected by a variety of links. There is a wide scope of
application areas for LLNs, including industrial monitoring, building
automation (HVAC, lighting, access control, fire), connected home,
healthcare, environmental monitoring, urban sensor networks, energy
management, assets tracking, refrigeration.
Vasseur Expires March 15, 2009 [Page 1]
Internet-Draft draft-vasseur-roll-terminology-00.txt September 2008
Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 6
4. Security Considerations . . . . . . . . . . . . . . . . . . . . 6
5. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 6
6. References . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6.1. Normative References . . . . . . . . . . . . . . . . . . . 6
6.2. Informative References . . . . . . . . . . . . . . . . . . 6
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 7
Intellectual Property and Copyright Statements . . . . . . . . . . 8
Vasseur Expires March 15, 2009 [Page 2]
Internet-Draft draft-vasseur-roll-terminology-00.txt September 2008
1. Introduction
The documents defines a terminology for discussing routing
requirements and solutions for networks referred to as Low power and
Lossy Networks (LLN).
Low power and Lossy networks (LLNs) are typically composed of many
embedded devices with limited power, memory, and processing resources
interconnected by a variety of links, such as IEEE 802.15.4, Low
Power WiFi. There is a wide scope of application areas for LLNs,
including industrial monitoring, building automation (HVAC, lighting,
access control, fire), connected home, healthcare, environmental
monitoring, urban sensor networks, energy management, assets
tracking, refrigeration.
Since these applications are usually highly specific (Industrial
Automation, Building Automation, ...), it is not uncommon to see a
number of disparate terms to describe the same device of
functionality. Thus it was needed to specify common terms for all
LLNs to avoid confusion and discrepancies. Terminology specific to a
particular application are out of the scope of this document.
It is expected that all routing requirements documents defining
requirements or specifying routing solutions for LLN will use the
common terminology specified in this document.
2. Terminology
Actuator: a field device that moves or controls an equipment. An
actuator can control and/or modulates the flow of a gas or liquid,
control electricity distribution, perform a mechanical operation, ...
AMI: Advanced Metering Infrastructure, part of Smart Grid.
Encompasses smart-metering applications.
BAS: Building Automation System. This term is synonymous with
Facility Management System (FMS).
BMS: Building Automation System. This term is synonymous with
Facility Management System (FMS)
Channel: Radio frequency sub-band used to transmit a modulated signal
carrying packets.
Channel Hopping An algorithm by which field devices synchronously
change channels during operation
Vasseur Expires March 15, 2009 [Page 3]
Internet-Draft draft-vasseur-roll-terminology-00.txt September 2008
Commissioning Tool: Any physical or logical device temporarily added
to the network for the expressed purpose of setting up the network
and device operational parameters
Closed Loop Control: A process whereby a device controller controls
an actuator based on information sensed by one or more field devices.
Controller: A field device that can receive sensor input and
automatically change the environment in the facility by manipulating
digital or analog actuators.
DA: Distribution Automation, part of Smart Grid. Encompasses
technologies for maintenance and management of electrical
distribution systems.
Downstream: Data direction traveling from outside of the LLN (LAN,
WAN, Internet) via the LBR to the LLN.
Field Device: physical devices placed in the network's operating
environment (plant, urban, home, ...). Field devices include
sensors, actuators as well as routers and Lowe power and lossy
network Border Router (LBR). A field device is most of the time a
constrained device with limited CPU, memory footprint, storage
capacity, bandwidth and sometimes power constrained (battery
operated). At the time of writing, for the sake of illustration, a
typicaly sensor or actuator would have a few KBytes of RAM, a few
dozens of KBytes of ROM/Flash memory, a 8/16/32 bit microcontroller
and communication capabilities ranging from a few Kbits/s to a few
hundreds of KBits/s. With the dramatic imrpovments of hardware and
software technologies it is expected to see continous improvments but
such devices will likely continue to be seen as constrained devices
compared to computers and routers used in the Internet.
Flash memory: non-volatile memory that can be re-programmed.
FMS: Facility Management System. A global term applied across all
the vertical designations within a building including, HVAC, Fire,
Security, Lighting and Elevator control.
HART: "Highway Addressable Remote Transducer", a group of
specifications for industrial process and control devices
administered by the HART Foundation (see [HART]). The latest version
for the specifications is HART7 which includes the additions for
WirelessHART.
HVAC: Heating, Ventilation and Air Conditioning. A term applied to
the comfort level of an internal space.
Vasseur Expires March 15, 2009 [Page 4]
Internet-Draft draft-vasseur-roll-terminology-00.txt September 2008
ISA: "International Society of Automation". ISA is an ANSI
accredited standards-making society. ISA100 is an ISA committee
whose charter includes defining a family of standards for industrial
automation. [ISA100.11a] is a working group within ISA100 that is
working on a standard for monitoring and non-critical process control
applications.
LAN: Local Area Network.
LBR: Low power and loosy network Border Router. The LBR is a device
that connects the low power and lossy network to another routing
domain such as a Local Area Network (LAN), Wide Area Network (WAN) or
the Internet where a possibly different routing protocol is in
operation. The LBR acts as a routing device and may possibly host
other functions such as data collector or aggregator, which is fairly
typical in LLN.
LLN: Low power and Lossy networks (LLNs) are typically composed of
many embedded devices with limited power, memory, and processing
resources interconnected by a variety of links, such as IEEE
802.15.4, Low Power WiFi. There is a wide scope of application areas
for LLNs, including industrial monitoring, building automation (HVAC,
lighting, access control, fire), connected home, healthcare,
environmental monitoring, urban sensor networks, energy management,
assets tracking, refrigeration..
Open Loop Control: A process whereby a plant operator manually
manipulates an actuator over the network where the decision is
influenced by information sensed by field devices.
RAM: Random Access Memory. The RAM is a volatile memory.
ROM: Read Only Memory.
ROLL: Routing Over Low power and Lossy networks.
Schedule: An agreed execution, wake-up, transmission, reception,
etc., time-table between two or more field devices.
Sensor: device that measures a physical quantity and convert it to a
analog or digital signal that can be read by a program or a user.
Sensed data can be of many types: electromagnetic (current, voltage,
power, resistance) , mechanical (pressure, flow, liquid density,
humidity, ...), chemical (oxygen, carbon monoxide, ...), acoustic
(noise, ultrasound), ...
Smart Grid: a broad class of applications to network and automate
utility infrastructure.
Vasseur Expires March 15, 2009 [Page 5]
Internet-Draft draft-vasseur-roll-terminology-00.txt September 2008
Timeslot: A fixed time interval that may be used for the transmission
or reception of a packet between two field devices. A timeslot used
for communications is associated with a slotted-link
Uptream: Data direction traveling from the LLN via the LBR to outside
of the LLN (LAN, WAN, Internet).
WAN: Wide Area Network.
3. IANA Considerations
This document includes no request for IANA action.
4. Security Considerations
Since this document specifies terminology and does not specify new
procedure or protocols, there are no security issues associated with
it.
5. Acknowledgements
The authors would like to thank ...
6. References
6.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
6.2. Informative References
[I-D.ietf-roll-home-routing-reqs]
Brandt, A. and G. Porcu, "Home Automation Routing
Requirement in Low Power and Lossy Networks",
draft-ietf-roll-home-routing-reqs-02 (work in progress),
July 2008.
[I-D.ietf-roll-indus-routing-reqs]
Networks, D., Thubert, P., Dwars, S., and T. Phinney,
"Industrial Routing Requirements in Low Power and Lossy
Networks", draft-ietf-roll-indus-routing-reqs-01 (work in
progress), July 2008.
Vasseur Expires March 15, 2009 [Page 6]
Internet-Draft draft-vasseur-roll-terminology-00.txt September 2008
[I-D.ietf-roll-urban-routing-reqs]
Dohler, M., Watteyne, T., Winter, T., Jacquenet, C.,
Madhusudan, G., Chegaray, G., and D. Barthel, "Urban WSNs
Routing Requirements in Low Power and Lossy Networks",
draft-ietf-roll-urban-routing-reqs-01 (work in progress),
July 2008.
[I-D.martocci-roll-building-routing-reqs]
Martocci, J., Riou, N., Mil, P., and W. Vermeylen,
"Commercial Routing Requirements in Low Power and Lossy
Networks", draft-martocci-roll-building-routing-reqs-00
(work in progress), September 2008.
Author's Address
JP Vasseur
Cisco Systems, Inc
1414 Massachusetts Avenue
Boxborough, MA 01719
USA
Email: jpv@cisco.com
Vasseur Expires March 15, 2009 [Page 7]
Internet-Draft draft-vasseur-roll-terminology-00.txt September 2008
Full Copyright Statement
Copyright (C) The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Vasseur Expires March 15, 2009 [Page 8]