Attestation Results for Secure Interactions

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶

This Internet-Draft will expire on 12 December 2021.¶

Copyright Notice

Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved.¶

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶

Table of Contents

1. Introduction

The first paragraph of the May 2021 US Presidential Executive Order on Improving the Nation's Cybersecurity [US-Executive-Order] ends with the statement "the trust we place in our digital infrastructure should be proportional to how trustworthy and transparent that infrastructure is." Later this order explores aspects of trustworthiness such as an auditable trust relationship, which it defines as an "agreed-upon relationship between two or more system elements that is governed by criteria for secure interaction, behavior, and outcomes."¶

The Remote ATtestation procedureS (RATS) architecture [I-D.ietf-rats-architecture] provides a useful context for programmatically establishing and maintaining such auditable trust relationships. Specifically, the architecture defines conceptual messages conveyed between architectural subsystems to support trustworthiness appraisal. The RATS conceptual message used to convey evidence of trustworthiness is the Attestation Results. The Attestation Results includes Verifier generated appraisals of an Attester including such information as the identity of the Attester, the security mechanisms employed on this Attester, and the Attester's current state of trustworthiness.¶

Generated Attestation Results are ultimately conveyed to one or more Relying Parties. Reception of an Attestation Result enables a Relying Party to determine what action to take with regards to an Attester. Frequently, this action will be to choose whether to allow the Attester to securely interact with the Relying Party over some connection between the two.¶

When determining whether to allow secure interactions with an Attester, a Relying Party is challenged with a number of difficult problems which it must be able to handle successfully. These problems include:¶

• What types of Attestation Results (AR) might a Relying Party be willing to trust from a specific type of Verifier?¶
• What supplemental information must the Verifier need to include within Attestation Results to convince a Relying Party to allow interactions, or to apply policies to any connections, based on these Attestation Results?¶
• What are the operating/environmental realities of the Attesting Environment where a Relying Party should only be able to associate a certain confidence regarding Attestation Results out of the Verifier? (In other words, different types of Trusted Execution Environments (TEE) need not be treated as equivalent.)¶
• How to make direct comparisons where there is a heterogeneous mix of Attesting Environments and Verifier types.¶

To address these problems, it is important that specific Attestation Result information elements are framed independently of Attesting Environment specific constraints. If they are not, a Relying Party would be forced to adapt to the syntax and semantics of many vendor specific environments. This is not a reasonable ask as there can be many types of Attesters interacting with or connecting to a Relying Party.¶

The business need therefore is for common Attestation Result information element definitions. With these definitions, consistent interaction or connectivity decisions can be made by a Relying Party where there is a heterogenous mix of Attesting Environment types and Verifier types.¶

This document defines information elements for Attestation Results in a way which normalizes the trustworthiness assertions that can be made from a diverse set of Attesters.¶

2. AR Augmented Evidence and Actions

An Attester creates AR Augmented Evidence by appending Attestation Results with supplemental Evidence. When a Relying Party receives AR Augmented Evidence, it will receive them as part of a protocol from an Attesting endpoint which expects some result from this communication. Upon receipt, the Relying Party will apply an Appraisal Policy for Attestation Results. This policy will consider both the Attestation Results as well as additional information about the Attester within the AR Agumented Evidence the when determining what action to take.¶

3. Secure Interactions Model

The establishment and maintenance of a connection between an Attester and a Relying Party will follow the Passport Model from Section 5.1 of [I-D.ietf-rats-architecture]. Figure 1 describes this flow of information using the time definitions described in [I-D.ietf-rats-architecture]. Corresponding messages are passed within an authentication framework, such the EAP protocol [RFC5247] over TLS [RFC8446].¶

  .----------------.
  | Attester       |
  | .-------------.|
  | | Attesting   ||             .----------.    .---------------.
  | | Environment ||             | Verifier |    | Relying Party |
  | '-------------'|             |     A    |    |  / Verifier B |
  '----------------'             '----------'    '---------------'
        time(VG)                       |                 |
          |<------Verifer PoF--------time(NS)            |
          |                            |                 |
 time(EG)(1)------Evidence------------>|                 |
          |                          time(RG)            |
          |<------Attestation Results-(2)                |
          ~                            ~                 ~
        time(VG')?                     |                 |
          ~                            ~                 ~
          |<------Relying Party PoF-----------------(3)time(NS')
          |                            |                 |
time(EG')(4)------AR-augmented Evidence----------------->|
          |                            |   time(RG',RA')(5)
                                                        (6)
                                                         ~
                                                      time(RX')

Figure 1 assumes that some form of time interval tracking is possible between the Verifer PoF and Relying Party PoF. However, there is a simplified case that does not require a Relying Party's PoF. In that second variant, the Relying Party trusts that the Attester cannot be meaningfully changed from the outside during that interval. Based on that assumption, the Relying Party PoF can be safely omitted. In essence, the AR-augmented Evidence is replaced by the stand-alone Attestation Results.¶

In the first variant illustrated in Figure 1, a Verifier B is often implemented as a code module within the Relying Party. In these cases, the role Relying Party and the role Verifier are collapsed in one entity. As a result, the entity can appraise both the Attestation Result parts as well as the Evidence parts of AR-augmented Evidence to determine whether an Attester qualifies for connection to the Relying Party's resources. Appraisal policies define the conditions and prerequisites for when an Attester qualifies for connection. In essence, an Attester has to be able to provide all of the mandatory affirming Trustworthiness Claims needed by a Relying Party's Appraisal Policy for Attestation Results, and none of the disqualifying detracting Trustworthiness Claims.¶

More details on each interaction step are as follows. The numbers used in this sequence match to the numbered steps in Figure 1:¶

1. An Attester sends Evidence which is provably fresh to Verifier A at time(EG). Freshness from the perspective of Verifier A MAY be established with Verifier PoF such as a nonce.¶

2. Verifier A appraises (1), then sends the following items back to that Attester within Attestation Results:¶

   1. the verified identity of the Attesting Environment,¶
   2. the Verifier A appraised Trustworthiness Vector of an Attester,¶
   3. a freshness proof associated with the Attestation Results,¶
   4. a Verifier signature across (2.1) though (2.3).¶
3. At time(EG') a Relying Party PoF (such as a nonce) known to the Relying Party is sent to the Attester.¶

4. The Attester generates and sends AR-augmented Evidence to the Relying Party/Verifier B. This AR-augmented Evidence includes:¶

   1. The Attestation Results from (2)¶
   2. Attestation Environment signing of a hash of the Attestation Results plus the proof-of-freshness from (3). This allows the delta of time between (2.3) and (3) to be definitively calculated by the Relying Party.¶

5. On receipt of (4), the Relying Party applies its Appraisal Policy for Attestation Results. At minimum, this appraisal policy process must include the following:¶

   1. Verify that (4.2) includes the nonce from (3).¶
   2. Use a local certificate to validate the signature (4.1).¶
   3. Verify that the hash from (4.2) matches (4.1)¶
   4. Use the identity of (2.1) to validate the signature of (4.2).¶
   5. Failure of any steps (5.1) through (5.4) means the link does not meet minimum validation criteria, therefore appraise the link as having a null Verifier B Trustworthiness Vector. Jump to step (6.1).¶
   6. When there is large or uncertain time gap between time(EG) and time(EG'), the link should be assigned a null Verifier B Trustworthiness Vector. Jump to step (6.1).¶

   7. Assemble the Verifier B Trustworthiness Vector¶

      1. Copy Verifier A Trustworthiness Vector to Verifier B Trustworthiness Vector¶
      2. Add implicit Trustworthiness Claims inherent to the type of TEE.¶
      3. Prune any unbelievable Trustworthiness Claims¶
      4. Prune any Trustworthiness Claims the Relying Party doesn't accept from this Verifier.¶

6. The Relying Party takes action based on Verifier B's appraised Trustworthiness Vector:¶

   1. Prune any Trustworthiness Claims not used in the Appraisal Policy for Attestion Results.¶
   2. Allow the information exchange from the Attester into a Relying Party context where the Verifier B appraised Trustworthiness Vector includes all the mandatory affirming Trustworthiness Claims, and none of the disqualifying detracting Trustworthiness Claims.¶
   3. Disallow any information exchange into a Relying Party context for which that Verifier B appraised Trustworthiness Vector is not qualified.¶

As link layer protocols re-authenticate, steps (1) to (2) and steps (3) to (6) will independently refresh. This allows the Trustworthiness of Attester to be continuously re-appraised. There are only specific triggers which will refresh Evidence generation (1), Attestation Result generation (2), and in consequence AR-augmented Evidence generation (4):¶

• life-cycle events, e.g. a change to an Authentication Secret of the Attester or an update of a software component¶
• uptime-cycle events, e.g. a hard reset of a composite device or a re-initialization of a TEE.¶
• authentication-cycle events, e.g. a link-layer interface resets or new TLS session is spawned.¶

Additionally, it is common that each device on either side of a connection will requires fresh remote attestation of its corresponding peer. This process is known as mutual-attestation. To support mutual-attestation, the process listed above may be run independently on each side of the connection.¶

4. Privacy Considerations

Privacy Considerations Text¶

5. Security Considerations

Security Considerations Text¶

6. IANA Considerations

See Body.¶

Appendix A. Supportable Trustworthiness Claims

The following is a table which shows what Claims are supportable by different Attesting Environment types. Note that claims MAY BE implicit to an Attesting Environment type, and therefore do not have to be included in the Trustworthiness Vector to be considered as set by the Relying Party.¶

Start: Evidence received starts the generation of a new
Trustworthiness Vector.  (e.g.,  TPM Quote Received, log received,
or appraisal timer expired)

Step 0: set Trustworthiness Vector = Null

Step 1: Is there sufficient fresh signed evidence to appraise?
  (yes) - No Action
  (no) -  Goto Step 6

Step 2: Appraise Hardware Integrity PCRs
  (if hw-verification-fail) - push onto vector, go to Step 6
    else (if hw-authentic) - push onto vector
  (if not evaluated, or insufficient data to conclude: take no action)

Step 3: Appraise Attesting Environment identity
  (if hw-instance-recognized) - push onto vector
    else (if hw-instance-unknown) - push onto vector
  (if not evaluated, or insufficient data to conclude: take no action)

Step 4: Appraise executable loaded and filesystem integrity
  (if executables-verified) - push onto vector
     else (if executables-refuted) - push onto vector, go to Step 6
  (if file-system-anomaly) - push onto vector, go to Step 6
  (if not evaluated, or insufficient data to conclude: take no action)

Step 5: Appraise all remaining Trustworthiness Claims and set as
        appropriate.

Step 6: Assemble Attestation Results, and push to Attester

End

Appendix B. Some issues being worked

It is possible for a cluster/hierarchy of Verifiers to have aggregate AR which are perhaps signed/endorsed by a lead Verifier. What should be the Proof-of-Freshness or Verifier associated with any of the aggregate set of Trustworthiness Claims?¶

There will need to be a subsequent document which documents how these objects which will be translated into a protocol on a wire (e.g. EAP on TLS). Some breakpoint between what is in this draft, and what is in specific drafts for wire encoding will need to be determined. Questions like architecting the cluster/hierarchy of Verifiers fall into this breakdown.¶

For Trustworthiness Claims such as 'exectables-verified', there could be value in identifying a specific Appraisal Policy for Attestation Results applied. One way this could be done would be a URI which identifies this policy. As the URI also could encode the version of the software, it might also act as a mechanism to signal the Relying Party to refresh/re-evaluate its view of Verifier A.¶

Expand the variant of Figure 1 which requires no Relying Party PoF into its own picture.¶

Rather than duplicating claim concepts for affirming vs detracting, perhaps we could collapse them and have affirming vs detracting be part of the value. Not collapsing complicates the test matrix.¶

Normalization of the identity claims between different types of TEE. E.g., does MRSIGNER plus extra loaded software = the sum of TrustZone Signer IDs for loaded components?¶

Appendix C. Contributors

Guy Fedorkow¶

Email: gfedorkow@juniper.net¶

Dave Thaler¶

Email: dthaler@microsoft.com¶

Authors' Addresses