|RFC 9238||Loading MUD URLs from QR Codes||May 2022|
|Richardson, et al.||Informational||[Page]|
- Independent Submission
Loading Manufacturer Usage Description (MUD) URLs from QR Codes
This informational document details a protocol to load Manufacturer Usage Description (MUD) definitions from RFC 8520 for devices that do not have them integrated.¶
This document is published to inform the Internet community of this mechanism to allow interoperability and to serve as a basis of other standards work if there is interest.¶
This document is not an Internet Standards Track specification; it is published for informational purposes.¶
This is a contribution to the RFC Series, independently of any other RFC stream. The RFC Editor has chosen to publish this document at its discretion and makes no statement about its value for implementation or deployment. Documents approved for publication by the RFC Editor are not candidates for any level of Internet Standard; see Section 2 of RFC 7841.¶
Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document.¶
The Manufacturer Usage Description (MUD) [RFC8520] defines a YANG data model to express what sort of access a device requires to operate correctly. That document additionally defines three ways for the device to communicate the MUD URL (i.e., the URL of the resulting MUD file in JSON [RFC8259]) to a network enforcement point: via DHCP, within an X.509 certificate extension, and via the Link Local Discovery Protocol (LLDP).¶
Each of the above mechanisms conveys the MUD URL in band and requires modifications to the device firmware. Most small Internet of Things (IoT) devices do not have LLDP and often have very restricted DHCP clients. Adding LLDP or DHCP options requires at least some minimal configuration change and possibly entirely new subsystems. Meanwhile, use of the PKIX certification extension only makes sense as part of a larger deployment based on an Initial Device Identifier (IDevID) [IEEE802-1AR], for instance, as described in [RFC8995].¶
In the above cases, these mechanisms can only be implemented by persons with access to modify and update the firmware of the device.¶
In the meantime, there is a chicken or egg problem [chickenegg]. That is, manufacturers are not motivated to (and thus likely do not) include MUD URLs in their products, as they believe that there are no gateways using those URLs. At the same time, gateways have little incentive to (and thus likely do not) include code that processes MUD URLs, as it is believed that no products have or disseminate URLs.¶
The protocol described in this document allows any person with physical access to the device to affix a reference to a MUD URL that can later be scanned by an end user.¶
Affixing a sticker can be done by:¶
- the marketing department of the manufacturer,¶
- an outsourced assembler plant,¶
- value-added resellers (perhaps in response to a local request for proposal (RFP)),¶
- a company importing the product (possibly to comply with a local regulation),¶
- a network administrator (perhaps before sending devices home with employees or to remote sites), and¶
- a retailer as a value-added service.¶
QR codes are informally described in [qrcode] and formally defined in [isoiec18004]. The protocol described in this document uses a QR code to encode the MUD URL. Specifically, the protocol leverages the data format from the Reverse Logistics Association's Standardized Quick Response for Logistics [SQRL].¶
SQRL codes are being put on devices via a sticker or via laser etching into the case in order to deal with many situations but specifically for end-of-life processing for the device. An important idea behind the effort is that clearly identifying a product permits appropriate disposal, refurbishment, or recycling of the components of the product.¶
There are also use cases for SQRL in which the codes are used as part of regular maintenance for a product.¶
SQRL is an application of the 12N Data Identifier system specified by the ANSI MH10.8.2 Committee [mh10] in a format appropriate for QR codes, as well as other things like Normalization Form C (NFC) transmissions.¶
Section 5 summarizes the considerations contained in "Updating files vs Updating MUD URLs" (Section 7.1 of [MUD-URLS]). Due to the immutable nature of the QR code, MUD URLs in this document will need to be non-firmware specific.¶
Although this document is not an IETF Standards Track publication, it adopts the conventions for normative language to provide clarity of instructions to the implementer. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
- <RS> Record Separator (US-ASCII 30)¶
- <EoT> End of Transmission (US-ASCII 4)¶
- <FS> Field Separator (US-ASCII 28)¶
- <GS> Group Separator (US-ASCII 29)¶
- <US> Unit Separator (US-ASCII 31)¶
- Concatenation Operator (US-ASCII 43: "+")¶
The QR code header starts with:¶
"[)>" <RS> "06" <GS> "12N"¶
- Include one or more Data Records. This consists of a four-letter Field Identifier, followed by US-ASCII characters terminated with a <Unit Separator>.¶
Additionally, there are optional flags that may be present in every Data Record, as described in Section 7.4 of [SQRL]. These flags have no bearing on MUD processing. A parser that is only collecting MUD URLs will not need to parse those flags. A general-purpose SQRL parser will need more complexity.¶
Field Separator characters are used in SQRL to signify the beginning of a new unit of data. A MUD-specific parser that encounters a Field Separator and has not yet collected the right MUD information MUST ignore the characters collected so far and then restart.¶
Environment records, as described in Section 7.4 of [SQRL], look and act exactly as fields, with a special Field Identifier. They serve no purpose when looking for MUD information and MAY be ignored.¶
The B000 Data Record is mandatory in [SQRL]. It MUST be in US-ASCII representation. It should be a representation of the company or brand name. It SHOULD match the ietf-mud/mud/mfg-name in the MUD file; however, the MUD file can contain arbitrary UTF-8 for this name, while the SQRL files are expected to be 7-bit US-ASCII.¶
The B001 Data Record is optional in [SQRL]. It is the Product Name in US-ASCII. Its presence is RECOMMENDED. Some third parties that create QR code stickers might not know the product name with 100% certainty and MAY prefer to omit this rather than create further confusion.¶
The B002 Data Record is optional in [SQRL] but is MANDATORY in this profile. It is the Model Name in US-ASCII. It SHOULD match the optional ietf-mud/mud/model-name in the MUD file if that entry is present in the MUD file. MUD files can contain arbitrary UTF-8 for the model-name, while the SQRL files are expected to be 7-bit US-ASCII.¶
If a third party that is creating QR codes cannot locate an official model number when creating their MUD file and QR code, then the third party SHOULD make one up.¶
A new Field Identifier has been assigned by the Reverse Logistics Association, which is "M180". This record MUST be filled with the MUD URL.¶
Short URLs are easier to encode into a QR code because they require fewer pixels of QR code. More content in the QR code requires a bigger image.¶
Use of URL shortening services (see [URLshorten]) can be useful, provided that the service is stable throughout the lifetime of the device and QR code and that the privacy stance of the service is well understood. The Security Considerations section of [RFC3986] applies, particularly Section 7.1.¶
The URL provided MUST NOT have a query (?) portion present. If one is present, the query portion MUST be removed before processing.¶
If a Media Access Control (MAC) address is used as a unique device identifier (which is RECOMMENDED if possible), then it MUST be included in this Data Record.¶
In this document, it is RECOMMENDED that 12 (or 16) hex octets are used with no spaces or punctuation. (16 octets are used in the IEEE 64-bit Extended Unique Identifier (EUI-64) format used in [IEEE.802.15.4] and some next generation Ethernet proposals). In this document, it is RECOMMENDED that uppercase hexadecimal letters be used.¶
Parsers that find punctuation (such as colons (":"), dashes ("-"), US-ASCII Space (32), US-ASCII TAB (0), US-ASCII linefeed (10), or US-ASCII carriage return (13)) MUST skip over the punctuation. Parsers MUST tolerate hexadecimal in uppercase, lowercase, and even mixed case. Systems SHOULD canonicalize it to uppercase.¶
The use of stickers to convey MUD URLs would appear to have little value when the stickers are applied by the end-user organization and consumed by the same. This is particularly the case when the QR code does not include the device MAC address. In such a situation, the installer handling the device would scan the QR code to get the appropriate MUD file reference and have to input the associated MAC address as well.¶
In such a case, one might wonder why the installer couldn't just enter the appropriate MAC address and select the appropriate Access Control Lists (ACLs) for the device. Then a MUD file or QR code to convey the MAC address would not be needed. However, the use of a MUD file (or QR code or other way to convey the MAC address) is advantageous because it offers several layers of indirection:¶
- The ACLs for a given device may be added or removed.¶
- The ACLs may refer to DNS names, which may map to IPv4 or IPv6 addresses.¶
- The entire file may be replaced and may also include supply chain information, such as Software Bill of Materials (SBOM).¶
In addition, the mechanism to install a new device (MAC address) to MUD file mapping does not need to permit any other network security settings to be alterable by the person doing the installation.¶
MUD URLs that are communicated in band by the device and that are programmed into the device's firmware may provide a firmware-specific version of the MUD URL. The advantage of this is that the resulting ACLs enforced in the network are specific to the needs of that version of the firmware.¶
A MUD URL that is affixed to the device with a sticker or etched into the case cannot be changed.¶
Given the considerations of "Updating MUD URLs vs Updating MUD files" (Section 6.1 of [MUD-URLS]), it is prudent to use a MUD URL that points to a MUD file that will only have new features added over time and never have features removed. To recap, if a feature is removed from the firmware and the MUD file still permits it, then there is a potential hole that could perhaps be exploited. The opposite situation, where a MUD file wrongly forbids something, leads to false positives in the security system, and the evidence is that this results in the entire system being ignored. Preventing attacks on core infrastructure may be more important than getting the ACL perfect.¶
When the firmware eventually receives built-in MUD URL support, then a more-specific URL may be used.¶
Note that in many cases, it will be third parties who are generating these QR codes, so the MUD file may be hosted by the third party.¶
At the time of writing, the IETF MUD is a new IETF Proposed Standard. Hence, IoT device manufacturers have not yet provided MUD profiles for their devices. A research group at the University of New South Wales (UNSW Sydney) has developed an open-source tool, called MUDgee [MUDgee], which automatically generates a MUD file (profile) for an IoT device from its traffic trace in order to make this process faster, easier, and more accurate. Note that the generated profile completeness solely depends on the completeness of the input traffic traces. MUDgee assumes that all the activity seen is intended and benign.¶
UNSW researchers have applied MUDgee to about 30 consumer IoT devices from their lab testbed and publicly released their MUD files [MUDfiles]. MUDgee can assist IoT manufacturers in developing and verifying MUD profiles, while also helping adopters of these devices to ensure they are compatible with their organizational policies.¶
Similar processes have been done in a number of other public and private labs. One of the strong motivations for this specification is to allow for this work to leave the lab and to be applied in the field.¶
The presence of the MUD URL in the QR code reveals the manufacturer of the device, the type or model of the device, and possibly the firmware version of the device.¶
The MAC address of the device will also need to be present, and this is potentially Personally Identifiable Information (PII). Such QR codes should not be placed on the outside of the packaging and only on the device itself, ideally on a non-prominent part of the device (e.g., the bottom).¶
The QR code sticker should not be placed on any part of the device that might become visible to machine vision systems in the same area. This includes security systems, robotic vacuum cleaners, or anyone taking a picture with a camera. Such systems may store the picture(s) in such a way that a future viewer of the image will be able to decode the QR code, possibly through an assembly of multiple pictures. Of course, the QR code is not, however, a certain indicator that the device is present, only that the QR code sticker that came with the device is present.¶
The use of URL shorting services discussed in Section 3.2.4 may result in trading convenience and efficiency with privacy, since the service provider might leverage per-device or per-customer, short URLs to track and correlate requests.¶
The mere presence of a QR code on a device does not in itself create any security issues on its own. Neither an attached paper sticker nor a laser-etched code in a plastic case will affect the device operation.¶
The QR code is not active; in general, it is not able to communicate using nearby networks. It is conceivable that something more active is concealed in the sticker, e.g., an NFC or a Radio Frequency Identification (RFID) tag. But, any sticker could contain such a thing, e.g., on some university campuses, stickers are often used as part of political campaigns and can be found attached all over the place.¶
Security issues that this protocol creates are related to assumptions that the presence of the QR code might imply. The presence of the QR code may imply to some owners or network operators that the behavior of the device has been vetted by some authority. It is here that some caution is required.¶
A possibly bigger risk from application of MUD file stickers to devices is that they may begin to convey a sense of safety to users of the device. The presence of the sticker, possibly with the logo of the physical establishment in which the device is located, could convey to occupants of the establishment that this device is an official device, for instance, a university that only deploys sensors on the university campus that have been vetted for compliance against a MUD definition.¶
The risk is then of social engineering, e.g., any device with a reasonable-looking QR code may be seen as a trusted device (even though such trust is not justified based on that evidence). An attacker that wishes to infiltrate their own devices need only suitably camouflage the device with an appropriate sticker in order to convey legitimacy.¶
The network operator who takes the MUD file designated by the QR code needs to be careful that they are validating the signature on the MUD file. The network operator needs to verify that the file is intact and that the signer of the file is authorized to sign MUD files for that vendor, or if a MUD file is a crowd-sourced definition, they need to establish if it can be trusted. [RFC8520] does not define any infrastructure to authenticate or authorize MUD file signers.¶
If a URL shortening service is used, it is possible that the MUD controller will be redirected to another MUD file with different content. The use of MUD signatures can detect attacks on the integrity of the file. To do this, the MUD controller needs to be able to verify the signature on the file.¶
If a Trust-On-First-Use (TOFU) policy is used for signature trust anchors, then the URL shortening service can still attack if it substitutes content and signature on the first use. MUD controllers and the people operating them need to be cautious when using TOFU.¶
Another issue with the stickers is that the wrong sticker could be applied to a device by a reseller or another trusted party, either in error or via some physical or socially engineered attack against that party. The network operator now onboards a device and applies what they think is a legitimate network policy for the device in their hands, only it is in fact a policy for another kind of device.¶
Careful examination of stickers is in order!¶
Inclusion of the device-specific MAC address (described in Section 3.2.5) in the QR code makes use of the MUD code much easier, as it identifies the device specifically. If the MAC address is not included, then a network operator, having the device in their hands, has to associate the policy with the device through some other interface.¶
Despite the significant advantage of having the MAC address included, it is unlikely that third-party stickers will include it. Including the MAC address requires that a unique sticker with a QR code be created for each device. This is possible if the sticker is applied by a manufacturer; it is already common to have a serial number and MAC address on the outside of the device. In that case, if the QR code is part of that sticker, then the customization problem is not that complex.¶
For cases where a third party has produced the QR code, it is likely that every device of a particular model will have the same QR code applied, omitting the MAC address. This increases the possibility that the wrong policy will be applied to a device.¶
- Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
- Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/info/rfc8174>.
- Lear, E., Droms, R., and D. Romascanu, "Manufacturer Usage Description Specification", RFC 8520, DOI 10.17487/RFC8520, , <https://www.rfc-editor.org/info/rfc8520>.
- Reverse Logistics Association, "SQRL Codes: Standardized Quick Response for Logistics, Using the 12N Data Identifier", , <https://rla.org/resource/12n-documentation>.
- Wikipedia, "Chicken or the egg", , <https://en.wikipedia.org/w/index.php?title=Chicken_or_the_egg&oldid=1081728488>.
- IEEE, "IEEE Standard for Low-Rate Wireless Networks", IEEE Std. 802.15.4-2015, DOI 10.1109/IEEESTD.2016.7460875, , <https://ieeexplore.ieee.org/document/7460875>.
- IEEE, "IEEE Standard for Local and Metropolitan Area Networks - Secure Device Identity", IEEE Std 802.1AR-2018, , <https://standards.ieee.org/ieee/802.1AR/6995/>.
- ISO/IEC, "Information technology - Automatic identification and data capture techniques - QR Code bar code symbology specification", ISO/IEC 18004:2015, .
- ANSI, "Data Identifier and Application Identifier Standard", ANSI MH10.8.2-2016, , <https://webstore.ansi.org/Standards/MHIA/ANSIMH102016>.
- Richardson, M., Pan, W., and E. Lear, "Authorized update to MUD URLs", Work in Progress, Internet-Draft, draft-ietf-opsawg-mud-acceptable-urls-04, , <https://datatracker.ietf.org/doc/html/draft-ietf-opsawg-mud-acceptable-urls-04>.
- UNSW Sydney, "MUD Profiles", <https://iotanalytics.unsw.edu.au/mud/>.
- "MUDgee", commit f63a88d, , <https://github.com/ayyoob/mudgee>.
- Wikipedia, "QR code", , <https://en.wikipedia.org/w/index.php?title=QR_code&oldid=1082559657>.
- "libqrencode", commit 715e29f, , <https://github.com/fukuchi/libqrencode>.
- Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, , <https://www.rfc-editor.org/info/rfc3986>.
- Pritikin, M., Richardson, M., Eckert, T., Behringer, M., and K. Watsen, "Bootstrapping Remote Secure Key Infrastructure (BRSKI)", RFC 8995, DOI 10.17487/RFC8995, , <https://www.rfc-editor.org/info/rfc8995>.
- Wikipedia, "URL shortening", , <https://en.wikipedia.org/w/index.php?title=URL_shorteningg&oldid=1084979184>.