Skip to main content

PSC protocol updates for non-revertive operation
draft-cdh-mpls-tp-psc-non-revertive-01

Document Type Replaced Internet-Draft (mpls WG)
Expired & archived
Authors Taesik Cheung , Alessandro D'Alessandro , Huub van Helvoort
Last updated 2013-10-21 (Latest revision 2013-09-10)
Replaced by draft-ryoogray-mpls-tp-psc-itu
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status (None)
Formats
Additional resources Mailing list discussion
Stream WG state Candidate for WG Adoption
Document shepherd Loa Andersson
IESG IESG state Replaced by draft-ryoogray-mpls-tp-psc-itu
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This document optionally updates [RFC6378], "MPLS Transport Profile (MPLS-TP) Linear Protection", to change non-revertive operation to be aligned with the behavior defined in [RFC4427] and in an effort to satisfy the ITU-T's protection switching requirements. An operator command, Manual Switch to Working (MS-W) is also included to revert traffic to the working path in non-revertive operation.

Authors

Taesik Cheung
Alessandro D'Alessandro
Huub van Helvoort

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)