Skip to main content

LDP Extensions for RMR
draft-esale-mpls-ldp-rmr-extensions-02

Document Type Replaced Internet-Draft (mpls WG)
Expired & archived
Authors Santosh Esale , Kireeti Kompella
Last updated 2018-07-28 (Latest revision 2018-05-20)
Replaces draft-esale-ldp-rmr-extensions
Replaced by draft-ietf-mpls-ldp-rmr-extensions
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status (None)
Formats
Additional resources Mailing list discussion
Stream WG state Adopted by a WG
Document shepherd (None)
IESG IESG state Replaced by draft-ietf-mpls-ldp-rmr-extensions
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This document describes LDP extensions to signal Resilient MPLS Ring (RMR) Label Switched Paths (LSPs). An RMR LSP is a multipoint to point LSP signaled using LDP (Label Distribution Protocol). RMR Architecture document - draft-ietf-mpls-rmr-02 - describes why and how MPLS should be used in ring topologies.

Authors

Santosh Esale
Kireeti Kompella

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)