Skip to main content

Methodology for Benchmarking Accelerated Stress with Operational Security
draft-ietf-bmwg-acc-bench-meth-opsec-00

Document Type Expired Internet-Draft (bmwg WG)
Expired & archived
Authors Scott Poretsky , Shankar Rao
Last updated 2005-07-14
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status (None)
Formats
Additional resources Mailing list discussion
Stream WG state WG Document
Document shepherd (None)
IESG IESG state Expired
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

Routers in an operational network are simultaneously configured with multiple protocols and security policies while forwarding traffic and being managed. To accurately benchmark a router for deployment it is necessary that the router be tested in these simultaneous operational conditions, which is known as Stress Testing. This document provides the Methodology for performing Stress Benchmarking of networking devices when subjected to instability as described in [7]. Descriptions of test topology, benchmarks and reporting format are provided in addition to procedures for conducting various test cases. This methodology is based upon the accelerated stress methodology guidelines [6] and is to be used with the companion terminology document [4].

Authors

Scott Poretsky
Shankar Rao

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)