Skip to main content

IPv6 Extensions for Route Target Distribution
draft-ietf-idr-bgp-ipv6-rt-constrain-12

Document Type Expired Internet-Draft (idr WG)
Expired & archived
Authors Keyur Patel , Robert Raszuk , Martin Djernaes , Jie Dong , Mach Chen
Last updated 2018-11-05 (Latest revision 2018-04-26)
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status Proposed Standard
Formats
Additional resources Mailing list discussion
Stream WG state WG Document
Document shepherd (None)
IESG IESG state Expired
Consensus boilerplate Yes
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

The current route target distribution specification as described in [RFC 4684] defines Route Target NLRIs of maximum length of 12 bytes. The IPv6 specific Route Target extended community is defined in [RFC 5701] as length of 20 bytes. Since the current specification only supports prefixes of maximum length of 12 bytes, the lack of an IPv6 specific Route Target reachability information may be a problem when an operator wants to use this application in a pure IPv6 environment. This document defines an extension that allows BGP to exchange longer length IPv6 Route Target prefixes.

Authors

Keyur Patel
Robert Raszuk
Martin Djernaes
Jie Dong
Mach Chen

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)