Cable Gateway Tools Management Information Base for CableHome compliant Residential Gateways
draft-ietf-ipcdn-cable-gateway-tools-mib-00
| Document | Type |
Expired Internet-Draft
(ipcdn WG)
Expired & archived
|
|
|---|---|---|---|
| Author | Eduardo Cardona | ||
| Last updated | 2003-06-24 | ||
| RFC stream | Internet Engineering Task Force (IETF) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Additional resources | Mailing list discussion | ||
| Stream | WG state | WG Document | |
| Document shepherd | (None) | ||
| IESG | IESG state | Expired | |
| Consensus boilerplate | Unknown | ||
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines a basic set of managed objects for SNMP- based management of CableHome compliant WAN Gateway Devices and home routers. Specifically, this MIB defines managed objects for both a connection speed tool and an ICMP 'ping' tool between the Gateway and devices on the LAN. This memo specifies a MIB module in a manner that is compliant to the SNMP SMIv2 [5][6][7]. The set of objects is consistent with the SNMP framework and existing SNMP standards.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)