Packet Loss and Delay Measurement for the MPLS Transport Profile
draft-ietf-mpls-tp-loss-delay-00
Document | Type |
Replaced Internet-Draft
(mpls WG)
Expired & archived
|
|
---|---|---|---|
Authors | Dan Frost , Stewart Bryant | ||
Last updated | 2011-01-24 (Latest revision 2010-07-26) | ||
Replaces | draft-frost-mpls-tp-loss-delay | ||
Replaced by | draft-ietf-mpls-tp-loss-delay-profile | ||
RFC stream | Internet Engineering Task Force (IETF) | ||
Intended RFC status | (None) | ||
Formats | |||
Additional resources | Mailing list discussion | ||
Stream | WG state | WG Document | |
Document shepherd | (None) | ||
IESG | IESG state | Replaced by draft-ietf-mpls-tp-loss-delay-profile | |
Consensus boilerplate | Unknown | ||
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
An essential Operations, Administration and Maintenance requirement of the MPLS Transport Profile (MPLS-TP) is the ability to monitor performance metrics for packet loss and one-way and two-way delay for MPLS-TP pseudowires, Label Switched Paths, and Sections. This document specifies protocol mechanisms to facilitate the efficient and accurate measurement of these performance metrics.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)