Skip to main content

Architecture and Requirements for Transport Services
draft-ietf-taps-arch-19

Document Type Active Internet-Draft (taps WG)
Authors Tommy Pauly , Brian Trammell , Anna Brunstrom , Gorry Fairhurst , Colin Perkins
Last updated 2024-04-19 (Latest revision 2023-11-09)
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status Proposed Standard
Formats
Reviews
Additional resources GitHub Repository
Mailing list discussion
Stream WG state Submitted to IESG for Publication
Associated WG milestone
Sep 2021
Submit document(s) to be published as Proposed Standard to the IESG specifying one or more methods to provide applications with the Transport Services identified by the WG
Document shepherd Michael Welzl
Shepherd write-up Show Last changed 2022-10-21
IESG IESG state RFC Ed Queue
Action Holders
(None)
Consensus boilerplate Yes
Telechat date (None)
Responsible AD Zaheduzzaman Sarker
Send notices to michawe@ifi.uio.no
IANA IANA review state Version Changed - Review Needed
IANA action state No IANA Actions
RFC Editor RFC Editor state EDIT
Details
draft-ietf-taps-arch-19
TAPS Working Group                                         T. Pauly, Ed.
Internet-Draft                                                Apple Inc.
Intended status: Standards Track                        B. Trammell, Ed.
Expires: 12 May 2024                             Google Switzerland GmbH
                                                            A. Brunstrom
                                                     Karlstad University
                                                            G. Fairhurst
                                                  University of Aberdeen
                                                              C. Perkins
                                                   University of Glasgow
                                                         9 November 2023

          Architecture and Requirements for Transport Services
                        draft-ietf-taps-arch-19

Abstract

   This document describes an architecture for exposing transport
   protocol features to applications for network communication.  This
   system exposes transport protocol features to applications for
   network communication.  The Transport Services Application
   Programming Interface (API) is based on an asynchronous, event-driven
   interaction pattern.  This API uses messages for representing data
   transfer to applications, and describes how a Transport Services
   Implementation can use multiple IP addresses, multiple protocols, and
   multiple paths, and provide multiple application streams.  This
   document provides the architecture and requirements.  It defines
   common terminology and concepts to be used in definitions of a
   Transport Service API and a Transport Services Implementation.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 12 May 2024.

Pauly, et al.              Expires 12 May 2024                  [Page 1]
Internet-Draft              TAPS Architecture              November 2023

Copyright Notice

   Copyright (c) 2023 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.  Code Components
   extracted from this document must include Revised BSD License text as
   described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Revised BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Background  . . . . . . . . . . . . . . . . . . . . . . .   4
     1.2.  Overview  . . . . . . . . . . . . . . . . . . . . . . . .   4
     1.3.  Specification of Requirements . . . . . . . . . . . . . .   5
     1.4.  Glossary of Key Terms . . . . . . . . . . . . . . . . . .   5
   2.  API Model . . . . . . . . . . . . . . . . . . . . . . . . . .   8
     2.1.  Event-Driven API  . . . . . . . . . . . . . . . . . . . .  10
     2.2.  Data Transfer Using Messages  . . . . . . . . . . . . . .  11
     2.3.  Flexible Implementation . . . . . . . . . . . . . . . . .  12
     2.4.  Coexistence . . . . . . . . . . . . . . . . . . . . . . .  13
   3.  API and Implementation Requirements . . . . . . . . . . . . .  13
     3.1.  Provide Common APIs for Common Features . . . . . . . . .  14
     3.2.  Allow Access to Specialized Features  . . . . . . . . . .  15
     3.3.  Select Between Equivalent Protocol Stacks . . . . . . . .  16
     3.4.  Maintain Interoperability . . . . . . . . . . . . . . . .  17
     3.5.  Support Monitoring  . . . . . . . . . . . . . . . . . . .  17
   4.  Transport Services Architecture and Concepts  . . . . . . . .  18
     4.1.  Transport Services API Concepts . . . . . . . . . . . . .  20
       4.1.1.  Endpoint Objects  . . . . . . . . . . . . . . . . . .  22
       4.1.2.  Connections and Related Objects . . . . . . . . . . .  22
       4.1.3.  Pre-establishment . . . . . . . . . . . . . . . . . .  24
       4.1.4.  Establishment Actions . . . . . . . . . . . . . . . .  24
       4.1.5.  Data Transfer Objects and Actions . . . . . . . . . .  25
       4.1.6.  Event Handling  . . . . . . . . . . . . . . . . . . .  26
       4.1.7.  Termination Actions . . . . . . . . . . . . . . . . .  27
       4.1.8.  Connection Groups . . . . . . . . . . . . . . . . . .  28
     4.2.  Transport Services Implementation . . . . . . . . . . . .  28
       4.2.1.  Candidate Gathering . . . . . . . . . . . . . . . . .  30
       4.2.2.  Candidate Racing  . . . . . . . . . . . . . . . . . .  30
       4.2.3.  Separating Connection Contexts  . . . . . . . . . . .  30
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  31
   6.  Security and Privacy Considerations . . . . . . . . . . . . .  31

Pauly, et al.              Expires 12 May 2024                  [Page 2]
Internet-Draft              TAPS Architecture              November 2023

   7.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  32
   8.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  32
     8.1.  Normative References  . . . . . . . . . . . . . . . . . .  32
     8.2.  Informative References  . . . . . . . . . . . . . . . . .  33
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  35

1.  Introduction

   Many application programming interfaces (APIs) to provide transport
   interfaces to networks have been deployed, perhaps the most widely
   known and imitated being the BSD Socket [POSIX] interface (Socket
   API).  The naming of objects and functions across these APIs is not
   consistent and varies depending on the protocol being used.  For
   example, sending and receiving streams of data is conceptually the
   same for both an unencrypted Transmission Control Protocol (TCP)
   stream and operating on an encrypted Transport Layer Security (TLS)
   [RFC8446] stream over TCP, but applications cannot use the same
   socket send() and recv() calls on top of both kinds of connections.
   Similarly, terminology for the implementation of transport protocols
   varies based on the context of the protocols themselves: terms such
   as "flow", "stream", "message", and "connection" can take on many
   different meanings.  This variety can lead to confusion when trying
   to understand the similarities and differences between protocols, and
   how applications can use them effectively.

   The goal of the Transport Services System architecture is to provide
   a flexible and reusable system with a common interface for transport
   protocols.  An application uses the Transport Services System through
   an abstract Connection (we use capitalization to distinguish these
   from the underlying connections of, e.g., TCP).  This provides
   flexible connection establishment allowing an application to request
   or require a set of properties.

   As applications adopt this interface, they will benefit from a wide
   set of transport features that can evolve over time, and ensure that
   the system providing the interface can optimize its behavior based on
   the application requirements and network conditions, without
   requiring changes to the applications.  This flexibility enables
   faster deployment of new features and protocols.

   This architecture can also support applications by offering racing
   mechanisms (attempting multiple IP addresses, protocols, or network
   paths in parallel), which otherwise need to be implemented in each
   application separately (see Section 4.2.2).  Racing selects one or
   more candidates each with equivalent protocol stacks that are used to
   identify an optimal combination of transport protocol instance such
   as TCP, UDP, or another transport, together with configuration of
   parameters and interfaces.  A Connection represents an object that,

Pauly, et al.              Expires 12 May 2024                  [Page 3]
Internet-Draft              TAPS Architecture              November 2023

   once established, can be used to send and receive messages.  A
   Connection can also be created from another Connection, by cloning,
   and then forms a part of a Connection Group whose Connections share
   properties.

   This document was developed in parallel with the specification of the
   Transport Services API [I-D.ietf-taps-interface] and implementation
   guidelines [I-D.ietf-taps-impl].  Although following the Transport
   Services architecture does not require all APIs and implementations
   to be identical, a common minimal set of features represented in a
   consistent fashion will enable applications to be easily ported from
   one implementation of the Transport Services System to another.

1.1.  Background

   The architecture of the Transport Services System is based on the
   survey of services provided by IETF transport protocols and
   congestion control mechanisms [RFC8095], and the distilled minimal
   set of the features offered by transport protocols [RFC8923].  These
   documents identified common features and patterns across all
   transport protocols developed thus far in the IETF.

   Since transport security is an increasingly relevant aspect of using
   transport protocols on the Internet, this document also considers the
   impact of transport security protocols on the feature-set exposed by
   Transport Services [RFC8922].

   One of the key insights to come from identifying the minimal set of
   features provided by transport protocols [RFC8923] was that features
   either require application interaction and guidance (referred to in
   that document as Functional or Optimizing Features), or else can be
   handled automatically by an implementation of the Transport Services
   System (referred to as Automatable Features).  Among the identified
   Functional and Optimizing Features, some are common across all or
   nearly all transport protocols, while others present features that,
   if specified, would only be useful with a subset of protocols, but
   would not harm the functionality of other protocols.  For example,
   some protocols can deliver messages faster for applications that do
   not require messages to arrive in the order in which they were sent.
   This functionality needs to be explicitly allowed by the application,
   since reordering messages would be undesirable in many cases.

1.2.  Overview

   This document describes the Transport Services System in three
   sections:

Pauly, et al.              Expires 12 May 2024                  [Page 4]
Internet-Draft              TAPS Architecture              November 2023

   *  Section 2 describes how the Transport Services API model differs
      from that of traditional socket-based APIs.  Specifically, it
      offers asynchronous event-driven interaction, the use of messages
      for data transfer, and the flexibility to use different transport
      protocols and paths without requiring major changes to the
      application.

   *  Section 3 explains the fundamental requirements for a Transport
      Services System.  These principles are intended to make sure that
      transport protocols can continue to be enhanced and evolve without
      requiring significant changes by application developers.

   *  Section 4 presents the Transport Services Implementation and
      defines the concepts that are used by the API
      [I-D.ietf-taps-interface] and described in the implementation
      guidelines [I-D.ietf-taps-impl].  This introduces the
      Preconnection, which allows applications to configure Connection
      Properties.

1.3.  Specification of Requirements

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

1.4.  Glossary of Key Terms

   This subsection provides a glossary of key terms related to the
   Transport Services architecture.  It provides a short description of
   key terms that are later defined in this document.

   *  Application: An entity that uses the transport layer for end-to-
      end delivery of data across the network [RFC8095].

   *  Cached State: The state and history that the Transport Services
      Implementation keeps for each set of the associated Endpoints that
      have been used previously.

   *  Candidate Path: One path that is available to an application and
      conforms to the Selection Properties and System Policy during
      racing.

   *  Candidate Protocol Stack: One Protocol Stack that can be used by
      an application for a Connection during racing.

   *  Client: The peer responsible for initiating a Connection.

Pauly, et al.              Expires 12 May 2024                  [Page 5]
Internet-Draft              TAPS Architecture              November 2023

   *  Clone: A Connection that was created from another Connection, and
      forms a part of a Connection Group.

   *  Connection: Shared state of two or more Endpoints that persists
      across Messages that are transmitted and received between these
      Endpoints [RFC8303].  When this document (and other Transport
      Services documents) use the capitalized "Connection" term, it
      refers to a Connection object that is being offered by the
      Transport Services system, as opposed to more generic uses of the
      word "connection".

   *  Connection Context: A set of stored properties across Connections,
      such as cached protocol state, cached path state, and heuristics,
      which can include one or more Connection Groups.

   *  Connection Group: A set of Connections that share properties and
      caches.

   *  Connection Property: A Transport Property that controls per-
      Connection behavior of a Transport Services implementation.

   *  Endpoint: An entity that communicates with one or more other
      endpoints using a transport protocol.

   *  Endpoint Identifier: An identifier that specifies one side of a
      Connection (local or remote), such as a hostname or URL.

   *  Equivalent Protocol Stacks: Protocol Stacks that can be safely
      swapped or raced in parallel during establishment of a Connection.

   *  Event: A primitive that is invoked by an Endpoint [RFC8303].

   *  Framer: A data translation layer that can be added to a Connection
      to define how application-layer Messages are transmitted over a
      Protocol Stack.

   *  Local Endpoint: The local Endpoint.

   *  Local Endpoint Identifier: A representation of the application's
      identifier for itself that it uses for a Connection.

   *  Message: A unit of data that can be transferred between two
      Endpoints over a Connection.

   *  Message Property: A property that can be used to specify details
      about Message transmission, or obtain details about the
      transmission after receiving a Message.

Pauly, et al.              Expires 12 May 2024                  [Page 6]
Internet-Draft              TAPS Architecture              November 2023

   *  Parameter: A value passed between an application and a transport
      protocol by a primitive [RFC8303].

   *  Path: A representation of an available set of properties that a
      Local Endpoint can use to communicate with a Remote Endpoint.

   *  Peer: An Endpoint application party to a Connection.

   *  Preconnection: an object that represents a Connection that has not
      yet been established.

   *  Preference: A preference to prohibit, avoid, ignore, prefer, or
      require a specific Transport Feature.

   *  Primitive: A function call that is used to locally communicate
      between an application and an Endpoint, which is related to one or
      more Transport Features [RFC8303].

   *  Protocol Instance: A single instance of one protocol, including
      any state necessary to establish connectivity or send and receive
      Messages.

   *  Protocol Stack: A set of Protocol Instances that are used together
      to establish connectivity or send and receive Messages.

   *  Racing: The attempt to select between multiple Protocol Stacks
      based on the Selection and Connection Properties communicated by
      the application, along with any Security Parameters.

   *  Remote Endpoint: The peer that a local Endpoint can communicate
      with when a Connection is established.

   *  Remote Endpoint Identifier: A representation of the application's
      identifier for a peer that can participate in establishing a
      Connection.

   *  Rendezvous: The action of establishing a peer-to-peer Connection
      with a Remote Endpoint.

   *  Security Parameters: Parameters that define an application's
      requirements for authentication and encryption on a Connection.

   *  Server: The peer responsible for responding to a Connection
      initiation.

   *  Socket: The combination of a destination IP address and a
      destination port number [RFC8303].

Pauly, et al.              Expires 12 May 2024                  [Page 7]
Internet-Draft              TAPS Architecture              November 2023

   *  System Policy: The input from an operating system or other global
      preferences that can constrain or influence how an implementation
      will gather Candidate Paths and Protocol Stacks and race the
      candidates during establishment of a Connection.

   *  Selection Property: A Transport Property that can be set to
      influence the selection of paths between the Local and Remote
      Endpoints.

   *  Transport Feature: A specific end-to-end feature that the
      transport layer provides to an application.

   *  Transport Property: A property that expresses requirements,
      prohibitions and preferences [RFC8095].

   *  Transport Service: A set of transport features, without an
      association to any given framing protocol, that provides a
      complete service to an application.

   *  Transport Services Implementation: This consists of all objects
      and protocol instances used internally to a system or library to
      implement the functionality needed to provide a transport service
      across a network, as required by the abstract interface.

   *  Transport Services System: The Transport Services Implementation
      and the Transport Services API.

2.  API Model

   The traditional model of using sockets can be represented as follows
   (see figure 1):

   *  Applications create connections and transfer data using the Socket
      API.

   *  The Socket API provides the interface to the implementations of
      TCP and UDP (typically implemented in the system's kernel).

   *  TCP and UDP in the kernel send and receive data over the available
      network-layer interfaces.

   *  Sockets are bound directly to transport-layer and network-layer
      addresses, obtained via a separate resolution step, usually
      performed by a system-provided DNS stub resolver.

Pauly, et al.              Expires 12 May 2024                  [Page 8]
Internet-Draft              TAPS Architecture              November 2023

   +-----------------------------------------------------+
   |                    Application                      |
   +-----------------------------------------------------+
           |                 |                  |
     +------------+     +------------+    +--------------+
     |  DNS stub  |     | Stream API |    | Datagram API |
     |  resolver  |     +------------+    +--------------+
     +------------+          |                  |
                       +---------------------------------+
                       |    TCP                UDP       |
                       |    Kernel Networking Stack      |
                       +---------------------------------+
                                       |
   +-----------------------------------------------------+
   |               Network Layer Interface               |
   +-----------------------------------------------------+

                         Figure 1: Socket API Model

   The architecture of the Transport Services System is an evolution of
   this general model of interaction.  It both modernizes the API
   presented to applications by the transport layer and enriches the
   capabilities of the Transport Services Implementation below this API.

   +-----------------------------------------------------+
   |                    Application                      |
   +-----------------------------------------------------+
                             |
   +-----------------------------------------------------+
   |              Transport Services API                 |
   +-----------------------------------------------------+
                             |
   +-----------------------------------------------------+
   |          Transport Services Implementation          |
   |  (Using: DNS, UDP, TCP, SCTP, DCCP, TLS, QUIC, etc) |
   +-----------------------------------------------------+
                             |
   +-----------------------------------------------------+
   |               Network Layer Interface               |
   +-----------------------------------------------------+

                   Figure 2: Transport Services API Model

   The Transport Services API [I-D.ietf-taps-interface] defines the
   interface for an application to create Connections and transfer data.
   It combines interfaces for multiple interaction patterns into a
   unified whole (see figure 2).  This offers generic functions and also
   the protocol-specific mappings for TCP, UDP, UDP-Lite, and other

Pauly, et al.              Expires 12 May 2024                  [Page 9]
Internet-Draft              TAPS Architecture              November 2023

   protocol layers.  These mapping are extensible.  Future documents
   could define similar mappings for new layers and for other transport
   protocols, such as QUIC [RFC9000].  By combining name resolution with
   connection establishment and data transfer in a single API, it allows
   for more flexible implementations to provide path and transport
   protocol agility on the application's behalf.

   The Transport Services Implementation [I-D.ietf-taps-impl] is the
   component of the Transport Services System that implements the
   transport layer protocols and other functions needed to send and
   receive data.  It is responsible for mapping the API to a specific
   available transport Protocol Stack and managing the available network
   interfaces and paths.

   There are key differences between the architecture of the Transport
   Services System and the architecture of the Socket API: the API of
   the Transport Services System is asynchronous and event-driven; it
   uses messages for representing data transfer to applications; and it
   describes how a Transport Services Implementation can resolve
   Endpoint Identifiers to use multiple IP addresses, multiple
   protocols, multiple paths, and provide multiple application streams.

2.1.  Event-Driven API

   Originally, the Socket API presented a blocking interface for
   establishing connections and transferring data.  However, most modern
   applications interact with the network asynchronously.  Emulation of
   an asynchronous interface using the Socket API can use a try-and-fail
   model: If the application wants to read, but data has not yet been
   received from the peer, the call to read will fail.  The application
   then waits and can try again later.

   In contrast to the Socket API, all interactions using the Transport
   Services API are expected to be asynchronous.  The API is defined
   around an event-driven model (see Section 4.1.6), which models this
   asynchronous interaction.  Other forms of asynchronous communication
   could also be available to applications, depending on the platform
   implementing the interface.

   For example, when an application that uses the Transport Services API
   wants to receive data, it issues an asynchronous call to receive new
   data from the Connection.  When delivered data becomes available,
   this data is delivered to the application using asynchronous events
   that contain the data.  Error handling is also asynchronous,
   resulting in asynchronous error events.

Pauly, et al.              Expires 12 May 2024                 [Page 10]
Internet-Draft              TAPS Architecture              November 2023

   This API also delivers events regarding the lifetime of a connection
   and changes in the available network links, which were not previously
   made explicit in the Socket API.

   Using asynchronous events allows for a more natural interaction model
   when establishing connections and transferring data.  Events in time
   more closely reflect the nature of interactions over networks, as
   opposed to how the Socket API represents network resources as file
   system objects that may be temporarily unavailable.

   Separate from events, callbacks are also provided for asynchronous
   interactions with the Transport Services API that are not directly
   related to events on the network or network interfaces.

2.2.  Data Transfer Using Messages

   The Socket API provides a message interface for datagram protocols
   like UDP, but provides an unstructured stream abstraction for TCP.
   While TCP has the ability to send and receive data as a byte-stream,
   most applications need to interpret structure within this byte-
   stream.  For example, HTTP/1.1 uses character delimiters to segment
   messages over a byte-stream [RFC9112]; TLS record headers carry a
   version, content type, and length [RFC8446]; and HTTP/2 uses frames
   to segment its headers and bodies [RFC9113].

   The Transport Services API represents data as messages, so that it
   more closely matches the way applications use the network.  A
   message-based abstraction provides many benefits, such as:

   *  providing additional information to the Protocol Stack;

   *  the ability to associate deadlines with messages, for applications
      that care about timing;

   *  the ability to control reliability, which messages to retransmit
      when there is packet loss, and how best to make use of the data
      that arrived;

   *  the ability to automatically assign messages and connections to
      underlying transport connections to utilize multi-streaming and
      pooled connections.

Pauly, et al.              Expires 12 May 2024                 [Page 11]
Internet-Draft              TAPS Architecture              November 2023

   Allowing applications to interact with messages is backwards-
   compatible with existing protocols and APIs because it does not
   change the wire format of any protocol.  Instead, it provides the
   Protocol Stack with additional information to allow it to make better
   use of modern transport services, while simplifying the application's
   role in parsing data.  For protocols that inherently use a streaming
   abstraction, framers (Section 4.1.5) bridge the gap between the two
   abstractions.

2.3.  Flexible Implementation

   The Socket API for protocols like TCP is generally limited to
   connecting to a single address over a single interface (IP source
   address).  It also presents a single stream to the application.
   Software layers built upon this API often propagate this limitation
   of a single-address single-stream model.  The Transport Services
   architecture is designed:

   *  to handle multiple candidate endpoints, protocols, and paths;

   *  to support candidate protocol racing to select the most optimal
      stack in each situation;

   *  to support multipath and multistreaming protocols;

   *  to provide state caching and application control over it.

   A Transport Services Implementation is intended to be flexible at
   connection establishment time, considering many different options and
   trying to select the most optimal combinations by racing them and
   measuring the results (see Section 4.2.1 and Section 4.2.2).  This
   requires applications to specify identifiers for the Local and Remote
   Endpoint that are higher-level than IP addresses, such as a hostname
   or URL, which are used by a Transport Services Implementation for
   resolution, path selection, and racing.  An implementation can
   further implement fallback mechanisms if connection establishment of
   one protocol fails or performance is detected to be unsatisfactory.

   Information used in connection establishment (e.g. cryptographic
   resumption tokens, information about usability of certain protocols
   on the path, results of racing in previous connections) are cached in
   the Transport Services Implementation.  Applications have control
   over whether this information is used for a specific establishment,
   in order to allow tradeoffs between efficiency and linkability.

   Flexibility after connection establishment is also important.
   Transport protocols that can migrate between multiple network-layer
   interfaces need to be able to process and react to interface changes.

Pauly, et al.              Expires 12 May 2024                 [Page 12]
Internet-Draft              TAPS Architecture              November 2023

   Protocols that support multiple application-layer streams need to
   support initiating and receiving new streams using existing
   connections.

2.4.  Coexistence

   While the architecture of the Transport Services System is designed
   as an enhanced replacement for the Socket API, it need not replace it
   entirely on a system or platform; indeed, coexistence has been
   recommended for incremental deployability [RFC8170].  The
   architecture is therefore designed such that it can run alongside
   (or, indeed, on top of) an existing Socket API implementation; only
   applications built to the Transport Services API are managed by the
   system's Transport Services Implementation.

3.  API and Implementation Requirements

   One goal of the architecture is to redefine the interface between
   applications and transports in a way that allows the transport layer
   to evolve and improve without fundamentally changing the contract
   with the application.  This requires a careful consideration of how
   to expose the capabilities of protocols.  The architecture also
   encompasses system policies that can influence and inform how
   transport protocols use a network path or interface.

   There are several ways the Transport Services System can offer
   flexibility to an application: it can provide access to transport
   protocols and protocol features; it can use these protocols across
   multiple paths that could have different performance and functional
   characteristics; and it can communicate with different remote systems
   to optimize performance, robustness to failure, or some other metric.
   Beyond these, if the Transport Services API remains the same over
   time, new protocols and features can be added to the Transport
   Services Implementation without requiring changes in applications for
   adoption.  Similarly, this can provide a common basis for utilizing
   information about a network path or interface, enabling evolution
   below the transport layer.

   The normative requirements described in this section allow Transport
   Services APIs and Transport Services Implementation to provide this
   functionality without causing incompatibility or introducing security
   vulnerabilities.

Pauly, et al.              Expires 12 May 2024                 [Page 13]
Internet-Draft              TAPS Architecture              November 2023

3.1.  Provide Common APIs for Common Features

   Any functionality that is common across multiple transport protocols
   SHOULD be made accessible through a unified set of calls using the
   Transport Services API.  As a baseline, any Transport Services API
   SHOULD allow access to the minimal set of features offered by
   transport protocols [RFC8923].  If that minimal set is updated or
   expanded in the future, the Transport Services API ought to be
   extended to match.

   An application can specify constraints and preferences for the
   protocols, features, and network interfaces it will use via
   Properties.  Properties are used by an application to declare its
   preferences for how the transport service should operate at each
   stage in the lifetime of a connection.  Transport Properties are
   subdivided into Selection Properties, which specify which paths and
   Protocol Stacks can be used and are preferred by the application;
   Connection Properties, which inform decisions made during connection
   establishment and fine-tune the established connection; and Message
   Properties, set on individual Messages.

   It is RECOMMENDED that the Transport Services API offers properties
   that are common to multiple transport protocols.  This enables a
   Transport Services System to appropriately select between protocols
   that offer equivalent features.  Similarly, it is RECOMMENDED that
   the Properties offered by the Transport Services API are applicable
   to a variety of network layer interfaces and paths, which permits
   racing of different network paths without affecting the applications
   using the API.  Each is expected to have a default value.

   It is RECOMMENDED that the default values for Properties are selected
   to ensure correctness for the widest set of applications, while
   providing the widest set of options for selection.  For example,
   since both applications that require reliability and those that do
   not require reliability can function correctly when a protocol
   provides reliability, reliability ought to be enabled by default.  As
   another example, the default value for a Property regarding the
   selection of network interfaces ought to permit as many interfaces as
   possible.

   Applications using the Transport Services API need to be designed to
   be robust to the automated selection provided by the Transport
   Services System.  This automated selection is constrained by the
   properties and preferences expressed by the application and requires
   applications to explicitly set properties that define any necessary
   constraints on protocol, path, and interface selection.

Pauly, et al.              Expires 12 May 2024                 [Page 14]
Internet-Draft              TAPS Architecture              November 2023

3.2.  Allow Access to Specialized Features

   There are applications that will need to control fine-grained details
   of transport protocols to optimize their behavior and ensure
   compatibility with remote systems.  It is therefore RECOMMENDED that
   the Transport Services API and the Transport Services Implementation
   permit more specialized protocol features to be used.

   A specialized feature could be needed by an application only when
   using a specific protocol, and not when using others.  For example,
   if an application is using TCP, it could require control over the
   User Timeout Option for TCP [RFC5482]; these options would not take
   effect for other transport protocols.  In such cases, the API ought
   to expose the features in such a way that they take effect when a
   particular protocol is selected, but do not imply that only that
   protocol could be used.  For example, if the API allows an
   application to specify a preference to use the User Timeout Option,
   communication would not fail when a protocol such as UDP is selected.

   Other specialized features, however, can also be strictly required by
   an application and thus further constrain the set of protocols that
   can be used.  For example, if an application requires support for
   automatic handover or failover for a connection, only Protocol Stacks
   that provide this feature are eligible to be used, e.g., Protocol
   Stacks that include a multipath protocol or a protocol that supports
   connection migration.  A Transport Services API needs to allow
   applications to define such requirements and constrain the options
   available to a Transport Services Implementation.  Since such options
   are not part of the core/common features, it will generally be simple
   for an application to modify its set of constraints and change the
   set of allowable protocol features without changing the core
   implementation.

   To control these specialized features, the application can declare
   its preference – whether the presence of a specific feature is
   prohibited, should be avoided, can be ignored, is preferred, or is
   required in the pre-establishment phase.  An implementation of a
   Transport Services API would honor this preference and allow the
   application to query the availability of each specialized feature
   after a successful establishment.

Pauly, et al.              Expires 12 May 2024                 [Page 15]
Internet-Draft              TAPS Architecture              November 2023

3.3.  Select Between Equivalent Protocol Stacks

   A Transport Services Implementation can attempt and select between
   multiple Protocol Stacks based on the Selection and Connection
   Properties communicated by the application, along with any Security
   Parameters.  The implementation can only attempt to use multiple
   Protocol Stacks when they are "equivalent", which means that the
   stacks can provide the same Transport Properties and interface
   expectations as requested by the application.  Equivalent Protocol
   Stacks can be safely swapped or raced in parallel (see Section 4.2.2)
   during connection establishment.

   The following two examples show non-equivalent Protocol Stacks:

   *  If the application requires preservation of message boundaries, a
      Protocol Stack that runs UDP as the top-level interface to the
      application is not equivalent to a Protocol Stack that runs TCP as
      the top-level interface.  A UDP stack would allow an application
      to read out message boundaries based on datagrams sent from the
      remote system, whereas TCP does not preserve message boundaries on
      its own, but needs a framing protocol on top to determine message
      boundaries.

   *  If the application specifies that it requires reliable
      transmission of data, then a Protocol Stack using UDP without any
      reliability layer on top would not be allowed to replace a
      Protocol Stack using TCP.

   The following example shows Equivalent Protocol Stacks:

   *  If the application does not require reliable transmission of data,
      then a Protocol Stack that adds reliability could be regarded as
      an Equivalent Protocol Stack as long as providing this would not
      conflict with any other application-requested properties.

   A Transport Services Implementation can race different security
   protocols, e.g., if the System Policy is explicitly configured to
   consider them equivalent.  A Transport Services implementation SHOULD
   only race Protocol Stacks where the transport security protocols
   within the stacks are identical.  To ensure that security protocols
   are not incorrectly swapped, a Transport Services Implementation MUST
   only select Protocol Stacks that meet application requirements
   ([RFC8922]).  A Transport Services Implementation MUST NOT
   automatically fall back from secure protocols to insecure protocols,
   or to weaker versions of secure protocols.  A Transport Services
   Implementation MAY allow applications to explicitly specify which
   versions of a protocol ought to be permitted, e.g., to allow a
   minimum version of TLS 1.2 in case TLS 1.3 is not available.

Pauly, et al.              Expires 12 May 2024                 [Page 16]
Internet-Draft              TAPS Architecture              November 2023

   A Transport Services Implementation MAY specify security properties
   relating to how the system operates (e.g., requirements,
   prohibitions, and preferences for the use of DNS Security Extensions
   (DNSSEC) or DNS over HTTPS (DoH)).

3.4.  Maintain Interoperability

   It is important to note that neither the Transport Services API
   [I-D.ietf-taps-interface] nor the guidelines for implementation of
   the Transport Service System [I-D.ietf-taps-impl] define new
   protocols or protocol capabilities that affect what is communicated
   across the network.  A Transport Services System MUST NOT require
   that a peer on the other side of a connection uses the same API or
   implementation.  A Transport Services Implementation acting as a
   connection initiator is able to communicate with any existing
   Endpoint that implements the transport protocol(s) and all the
   required properties selected.  Similarly, a Transport Services
   Implementation acting as a Listener can receive connections for any
   protocol that is supported from an existing initiator that implements
   the protocol, independent of whether the initiator uses the Transport
   Services System or not.

   A Transport Services Implemenation makes decisions that select
   protocols and interfaces.  In normal use, a given version of a
   Transport Services System SHOULD result in consistent protocol and
   interface selection decisions for the same network conditions given
   the same set of Properties.  This is intended to provide predictable
   outcomes to the application using the API.

3.5.  Support Monitoring

   The Transport Services API increases the layer of abstraction for
   applications, and it enables greater automation below the API.  Such
   increased abstraction comes at the cost of increased complexity when
   application programmers, users or system administrators try to
   understand why any issues and failures may be happening.  Transport
   Services systems should therefore offer monitoring functions that
   provide relevant debug and diagnostics information.  For example,
   such monitoring functions could indicate the protocol(s) in use, the
   number of open connections per protocol, and any statistics that
   these protocols may offer.

Pauly, et al.              Expires 12 May 2024                 [Page 17]
Internet-Draft              TAPS Architecture              November 2023

4.  Transport Services Architecture and Concepts

   This section of the document describes the architecture non-
   normatively and explains the operation of a Transport Services
   Implementation.  The concepts defined in this document are intended
   primarily for use in the documents and specifications that describe
   the Transport Services System.  This includes the architecture, the
   Transport Services API and the associated Transport Services
   Implementation.  While the specific terminology can be used in some
   implementations, it is expected that there will remain a variety of
   terms used by running code.

   The architecture divides the concepts for Transport Services System
   into two categories:

   1.  API concepts, which are intended to be exposed to applications;
       and

   2.  System-implementation concepts, which are intended to be
       internally used by a Transport Services Implementation.

   The following diagram summarizes the top-level concepts in a
   Transport Services System and how they relate to one another.

Pauly, et al.              Expires 12 May 2024                 [Page 18]
Internet-Draft              TAPS Architecture              November 2023

     +-----------------------------------------------------+
     |                    Application                      |
     +-+----------------+------^-------+--------^----------+
       |                |      |       |        |
     pre-               |     data     |      events
     establishment      |   transfer   |        |
       |        establishment  |   termination  |
       |                |      |       |        |
       |             +--v------v-------v+       |
     +-v-------------+   Connection(s)  +-------+----------+
     |  Transport    +--------+---------+                  |
     |  Services              |                            |
     |  API                   |  +-------------+           |
     +------------------------+--+  Framer(s)  |-----------+
                              |  +-------------+
     +------------------------|----------------------------+
     |  Transport             |                            |
     |  System                |        +-----------------+ |
     |  Implementation        |        |     Cached      | |
     |                        |        |      State      | |
     |  (Candidate Gathering) |        +-----------------+ |
     |                        |                            |
     |  (Candidate Racing)    |        +-----------------+ |
     |                        |        |     System      | |
     |                        |        |     Policy      | |
     |             +----------v-----+  +-----------------+ |
     |             |    Protocol    |                      |
     +-------------+    Stack(s)    +----------------------+
                   +-------+--------+
                           V
   +-----------------------------------------------------+
   |               Network Layer Interface               |
   +-----------------------------------------------------+

      Figure 3: Concepts and Relationships in the Architecture of the
                         Transport Services System

   The Transport Services Implementation includes the Cached State and
   System Policy.

Pauly, et al.              Expires 12 May 2024                 [Page 19]
Internet-Draft              TAPS Architecture              November 2023

   The System Policy provides input from an operating system or other
   global preferences that can constrain or influence how an
   implementation will gather Candidate Paths and Protocol Stacks and
   race the candidates when establishing a Connection.  As the details
   of System Policy configuration and enforcement are largely platform-
   and implementation- dependent, and do not affect application-level
   interoperability, the Transport Services API
   [I-D.ietf-taps-interface] does not specify an interface for reading
   or writing System Policy.

   The Cached State is the state and history that the Transport Services
   Implementation keeps for each set of associated Endpoints that have
   previously been used.  An application ought to explicitly request any
   required or desired properties via the Transport Services API.

4.1.  Transport Services API Concepts

   Fundamentally, a Transport Services API needs to provide Connection
   objects (Section 4.1.2) that allow applications to establish
   communication, and then send and receive data.  These could be
   exposed as handles or referenced objects, depending on the chosen
   programming language.

   Beyond the Connection objects, there are several high-level groups of
   actions that any Transport Services API needs to provide:

   *  Pre-establishment (Section 4.1.3) encompasses the properties that
      an application can pass to describe its intent, requirements,
      prohibitions, and preferences for its networking operations.
      These properties apply to multiple transport protocols, unless
      otherwise specified.  Properties specified during pre-
      establishment can have a large impact on the rest of the
      interface: they modify how establishment occurs, they influence
      the expectations around data transfer, and they determine the set
      of events that will be supported.

   *  Establishment (Section 4.1.4) focuses on the actions that an
      application takes on the Connection objects to prepare for data
      transfer.

   *  Data Transfer (Section 4.1.5) consists of how an application
      represents the data to be sent and received, the functions
      required to send and receive that data, and how the application is
      notified of the status of its data transfer.

Pauly, et al.              Expires 12 May 2024                 [Page 20]
Internet-Draft              TAPS Architecture              November 2023

   *  Event Handling (Section 4.1.6) defines categories of notifications
      that an application can receive during the lifetime of a
      Connection.  Events also provide opportunities for the application
      to interact with the underlying transport by querying state or
      updating maintenance options.

   *  Termination (Section 4.1.7) focuses on the methods by which data
      transmission is stopped, and connection state is torn down.

   The diagram below provides a high-level view of the actions and
   events during the lifetime of a Connection object.  Note that some
   actions are alternatives (e.g., whether to initiate a connection or
   to listen for incoming connections), while others are optional (e.g.,
   setting Connection and Message Properties in pre-establishment) or
   have been omitted for brevity and simplicity.

     Pre-establishment     :       Established             : Termination
     -----------------     :       -----------             : -----------
                           :                               :
 +-- Local Endpoint        :           Message             :
 +-- Remote Endpoint       :    Receive() |                :
 +-- Transport Properties  :       Send() |                :
 +-- Security Parameters   :              |                :
 |                         :              |                :
 |               InitiateWithSend()       |        Close() :
 |   +---------------+   Initiate() +-----+------+ Abort() :
 +---+ Preconnection |------------->| Connection |-----------> Closed
     +---------------+ Rendezvous() +------------+         :
    Listen() |             :           |     |             :
             |             :           |     v             :
             v             :           | Connection        :
     +----------+          :           |   Ready           :
     | Listener |----------------------+                   :
     +----------+  Connection Received                     :
                           :                               :

            Figure 4: The lifetime of a Connection object

   In this diagram, the lifetime of a Connection object is divided into
   three phases: pre-establishment, the Established state, and
   Termination.

Pauly, et al.              Expires 12 May 2024                 [Page 21]
Internet-Draft              TAPS Architecture              November 2023

   Pre-establishment is based around a Preconnection object, that
   contains various sub-objects that describe the properties and
   parameters of desired Connections (Local and Remote Endpoints,
   Transport Properties, and Security Parameters).  A Preconnection can
   be used to start listening for inbound connections, in which case a
   Listener object is created, or can be used to establish a new
   connection directly using Initiate (for outbound connections) or
   Rendezvous (for peer-to-peer connections).

   Once a Connection is in the Established state, an application can
   send and receive Message objects, and receive state updates.

   Closing or aborting a connection, either locally or from the peer,
   can terminate a connection.

4.1.1.  Endpoint Objects

   An Endpoint Identifier specifies one side of a transport connection.
   Endpoints can be Local Endpoints or Remote Endpoints, and the
   Endpoint Identifiers can respectively represent an identity that the
   application uses for the source or destination of a connection.  An
   Endpoint Identifier can be specified at various levels of
   abstraction.  An Endpoint Identifier at a higher level of abstraction
   (such as a hostname) can be resolved to more concrete identities
   (such as IP addresses).  A Remote Endpoint Identifier can also
   represent a multicast group or anycast address.  In the case of
   multicast, this selects a multicast transport for communication.

   *  Remote Endpoint Identifier: The Remote Endpoint Identifier
      represents the application's identifier for a peer that can
      participate in a transport connection; for example, the
      combination of a DNS name for the peer and a service name/port.

   *  Local Endpoint Identifier: The Local Endpoint Identifier
      represents the application's identifier for itself that it uses
      for transport connections; for example, a local IP address and
      port.

4.1.2.  Connections and Related Objects

   *  Connection: A Connection object represents one or more active
      transport protocol instances that can send and/or receive Messages
      between Local and Remote Endpoints.  It is an abstraction that
      represents the communication.  The Connection object holds state
      pertaining to the underlying transport protocol instances and any
      ongoing data transfers.  For example, an active Connection can
      represent a connection-oriented protocol such as TCP, or can
      represent a fully-specified 5-tuple for a connectionless protocol

Pauly, et al.              Expires 12 May 2024                 [Page 22]
Internet-Draft              TAPS Architecture              November 2023

      such as UDP, where the Connection remains an abstraction at the
      endpoints.  It can also represent a pool of transport protocol
      instances, e.g., a set of TCP and QUIC connections to equivalent
      endpoints, or a stream of a multi-streaming transport protocol
      instance.  Connections can be created from a Preconnection or by a
      Listener.

   *  Preconnection: A Preconnection object is a representation of a
      Connection that has not yet been established.  It has state that
      describes parameters of the Connection: the Local Endpoint
      Identifier from which that Connection will be established, the
      Remote Endpoint Identifier (Section 4.1.3) to which it will
      connect, and Transport Properties that influence the paths and
      protocols a Connection will use.  A Preconnection can be either
      fully specified (representing a single possible Connection), or it
      can be partially specified (representing a family of possible
      Connections).  The Local Endpoint (Section 4.1.3) is required for
      a Preconnection used to Listen for incoming Connections, but
      optional if it is used to Initiate a Connection.  The Remote
      Endpoint Identifier is required in a Preconnection that used to
      Initiate a Connection, but is optional if it is used to Listen for
      incoming Connections.  The Local Endpoint Identifier and the
      Remote Endpoint Identifier are both required if a peer-to-peer
      Rendezvous is to occur based on the Preconnection.

   *  Transport Properties: Transport Properties allow the application
      to express their requirements, prohibitions, and preferences and
      configure a Transport Services Implementation.  There are three
      kinds of Transport Properties:

      -  Selection Properties (Section 4.1.3): Selection Properties can
         only be specified on a Preconnection.

      -  Connection Properties (Section 4.1.3): Connection Properties
         can be specified on a Preconnection and changed on the
         Connection.

      -  Message Properties (Section 4.1.5): Message Properties can be
         specified as defaults on a Preconnection or a Connection, and
         can also be specified during data transfer to affect specific
         Messages.

   *  Listener: A Listener object accepts incoming transport protocol
      connections from Remote Endpoints and generates corresponding
      Connection objects.  It is created from a Preconnection object
      that specifies the type of incoming Connections it will accept.

Pauly, et al.              Expires 12 May 2024                 [Page 23]
Internet-Draft              TAPS Architecture              November 2023

4.1.3.  Pre-establishment

   *  Selection Properties: The Selection Properties consist of the
      properties that an application can set to influence the selection
      of paths between the Local and Remote Endpoints, to influence the
      selection of transport protocols, or to configure the behavior of
      generic transport protocol features.  These properties can take
      the form of requirements, prohibitions, or preferences.  Examples
      of properties that influence path selection include the interface
      type (such as a Wi-Fi connection, or a Cellular LTE connection),
      requirements around the largest Message that can be sent, or
      preferences for throughput and latency.  Examples of properties
      that influence protocol selection and configuration of transport
      protocol features include reliability, multipath support, and fast
      open support.

   *  Connection Properties: The Connection Properties are used to
      configure protocol-specific options and control per-connection
      behavior of a Transport Services Implementation; for example, a
      protocol-specific Connection Property can express that if TCP is
      used, the implementation ought to use the User Timeout Option.
      Note that the presence of such a property does not require that a
      specific protocol will be used.  In general, these properties do
      not explicitly determine the selection of paths or protocols, but
      can be used by an implementation during connection establishment.
      Connection Properties are specified on a Preconnection prior to
      Connection establishment, and can be modified on the Connection
      later.  Changes made to Connection Properties after Connection
      establishment take effect on a best-effort basis.

   *  Security Parameters: Security Parameters define an application's
      requirements for authentication and encryption on a Connection.
      They are used by Transport Security protocols (such as those
      described in [RFC8922]) to establish secure Connections.  Examples
      of parameters that can be set include local identities, private
      keys, supported cryptographic algorithms, and requirements for
      validating trust of remote identities.  Security Parameters are
      primarily associated with a Preconnection object, but properties
      related to identities can be associated directly with Endpoints.

4.1.4.  Establishment Actions

   *  Initiate: The primary action that an application can take to
      create a Connection to a Remote Endpoint, and prepare any required
      local or remote state to enable the transmission of Messages.  For
      some protocols, this will initiate a client-to-server style
      handshake; for other protocols, this will just establish local
      state (e.g., with connectionless protocols such as UDP).  The

Pauly, et al.              Expires 12 May 2024                 [Page 24]
Internet-Draft              TAPS Architecture              November 2023

      process of identifying options for connecting, such as resolution
      of the Remote Endpoint Identifier, occurs in response to the
      Initiate call.

   *  Listen: Enables a Listener to accept incoming connections.  The
      Listener will then create Connection objects as incoming
      connections are accepted (Section 4.1.6).  Listeners by default
      register with multiple paths, protocols, and Local Endpoints,
      unless constrained by Selection Properties and/or the specified
      Local Endpoint Identifier(s).  Connections can be accepted on any
      of the available paths or endpoints.

   *  Rendezvous: The action of establishing a peer-to-peer connection
      with a Remote Endpoint.  It simultaneously attempts to initiate a
      connection to a Remote Endpoint while listening for an incoming
      connection from that Endpoint.  The process of identifying options
      for the connection, such as resolution of the Remote Endpoint
      Identifier(s), occurs in response to the Rendezvous call.  As with
      Listeners, the set of local paths and endpoints is constrained by
      Selection Properties.  If successful, the Rendezvous call
      generates and asynchronously returns a Connection object to
      represent the established peer-to-peer connection.  The processes
      by which connections are initiated during a Rendezvous action will
      depend on the set of Local and Remote Endpoints configured on the
      Preconnection.  For example, if the Local and Remote Endpoints are
      TCP host candidates, then a TCP simultaneous open [RFC9293] might
      be performed.  However, if the set of Local Endpoints includes
      server reflexive candidates, such as those provided by STUN
      (Session Traversal Utilities for NAT) [RFC5389], a Rendezvous
      action will race candidates in the style of the ICE (Interactive
      Connection Establishment) algorithm [RFC8445] to perform NAT
      binding discovery and initiate a peer-to-peer connection.

4.1.5.  Data Transfer Objects and Actions

   *  Message: A Message object is a unit of data that can be
      represented as bytes that can be transferred between two endpoints
      over a transport connection.  The bytes within a Message are
      assumed to be ordered.  If an application does not care about the
      order in which a peer receives two distinct spans of bytes, those
      spans of bytes are considered independent Messages.  Messages are
      sent in the payload of IP packets.  One packet can carry one or
      more Messages or parts of a Message.

   *  Message Properties: Message Properties are used to specify details
      about Message transmission.  They can be specified directly on
      individual Messages, or can be set on a Preconnection or
      Connection as defaults.  These properties might only apply to how

Pauly, et al.              Expires 12 May 2024                 [Page 25]
Internet-Draft              TAPS Architecture              November 2023

      a Message is sent (such as how the transport will treat
      prioritization and reliability), but can also include properties
      that specific protocols encode and communicate to the Remote
      Endpoint.  When receiving Messages, Message Properties can contain
      information about the received Message, such as metadata generated
      at the receiver and information signalled by the Remote Endpoint.
      For example, a Message can be marked with a Message Property
      indicating that it is the final Message on a Connection.

   *  Send: The action to transmit a Message over a Connection to the
      Remote Endpoint.  The interface to Send can accept Message
      Properties specific to how the Message content is to be sent.  The
      status of the Send operation is delivered back to the sending
      application in an event (Section 4.1.6).

   *  Receive: An action that indicates that the application is ready to
      asynchronously accept a Message over a Connection from a Remote
      Endpoint, while the Message content itself will be delivered in an
      event (Section 4.1.6).  The interface to Receive can include
      Message Properties specific to the Message that is to be delivered
      to the application.

   *  Framer: A Framer is a data translation layer that can be added to
      a Connection.  Framers allow extending a Connection's Protocol
      Stack to define how to encapsulate or encode outbound Messages,
      and how to decapsulate or decode inbound data into Messages.  In
      this way, message boundaries can be preserved when using a
      Connection object, even with a protocol that otherwise presents
      unstructured streams, such as TCP.  This is designed based on the
      fact that many of the current application protocols evolved over
      TCP, which does not provide message boundary preservation, and
      since many of these protocols require message boundaries to
      function, each application layer protocol has defined its own
      framing.  For example, when an HTTP application sends and receives
      HTTP messages over a byte-stream transport, it must parse the
      boundaries of HTTP messages from the stream of bytes.

4.1.6.  Event Handling

   The following categories of events can be delivered to an
   application:

   *  Connection Ready: Signals to an application that a given
      Connection is ready to send and/or receive Messages.  If the
      Connection relies on handshakes to establish state between peers,
      then it is assumed that these steps have been taken.

Pauly, et al.              Expires 12 May 2024                 [Page 26]
Internet-Draft              TAPS Architecture              November 2023

   *  Connection Closed: Signals to an application that a given
      Connection is no longer usable for sending or receiving Messages.
      The event delivers a reason or error to the application that
      describes the nature of the termination.

   *  Connection Received: Signals to an application that a given
      Listener has received a Connection.

   *  Message Received: Delivers received Message content to the
      application, based on a Receive action.  To allow an application
      to limit the occurrence of such events, each call to Receive will
      be paired with a single Receive event.  This can include an error
      if the Receive action cannot be satisfied, e.g., due to the
      Connection being closed.

   *  Message Sent: Notifies the application of the status of its Send
      action.  This might indicate a failure if the Message cannot be
      sent, or an indication that the Message has been processed by the
      Transport Services System.

   *  Path Properties Changed: Notifies the application that a property
      of the Connection has changed that might influence how and where
      data is sent and/or received.

4.1.7.  Termination Actions

   *  Close: The action an application takes on a Connection to indicate
      that it no longer intends to send data, is no longer willing to
      receive data, and that the protocol should signal this state to
      the Remote Endpoint if the transport protocol allows this.  (Note
      that this is distinct from the concept of "half-closing" a
      bidirectional connection, such as when a FIN is sent in one
      direction of a TCP connection [RFC9293].  The end of a stream can
      also be indicated using Message Properties when sending.)

   *  Abort: The action the application takes on a Connection to
      indicate a Close and also indicate that the Transport Services
      System should not attempt to deliver any outstanding data, and
      immediately drop the connection.  This is intended for immediate,
      usually abnormal, termination of a connection.

Pauly, et al.              Expires 12 May 2024                 [Page 27]
Internet-Draft              TAPS Architecture              November 2023

4.1.8.  Connection Groups

   A Connection Group is a set of Connections that shares Connection
   Properties and cached state generated by protocols.  A Connection
   Group represents state for managing Connections within a single
   application, and does not require end-to-end protocol signaling.  For
   transport protocols that support multiplexing, only Connections
   within the same Connection Group are allowed to be multiplexed
   together.

   The API allows a Connection to be created from another Connection.
   This adds the new Connection to the Connection Group.  A change to
   one of the Connection Properties on any Connection in the Connection
   Group automatically changes the Connection Property for all others.
   All Connections in a Connection Group share the same set of
   Connection Properties except for the Connection Priority.  These
   Connection Properties are said to be entangled.

   Passive Connections can also be added to a Connection Group, e.g.,
   when a Listener receives a new Connection that is just a new stream
   of an already active multi-streaming protocol instance.

   While Connection Groups are managed by the Transport Services
   Implementation, an application can define different Connection
   Contexts for different Connection Groups to explicitly control
   caching boundaries, as discussed in Section 4.2.3.

4.2.  Transport Services Implementation

   This section defines the key architectural concepts for the Transport
   Services Implementation within the Transport Services System.

   The Transport Services System consists of the Transport Services
   Implementation and the Transport Services API.  The Transport
   Services Implementation consists of all objects and protocol
   instances used internally to a system or library to implement the
   functionality needed to provide a transport service across a network,
   as required by the abstract interface.

   *  Path: Represents an available set of properties that a Local
      Endpoint can use to communicate with a Remote Endpoint, such as
      routes, addresses, and physical and virtual network interfaces.

   *  Protocol Instance: A single instance of one protocol, including
      any state necessary to establish connectivity or send and receive
      Messages.

Pauly, et al.              Expires 12 May 2024                 [Page 28]
Internet-Draft              TAPS Architecture              November 2023

   *  Protocol Stack: A set of Protocol Instances (including relevant
      application, security, transport, or Internet protocols) that are
      used together to establish connectivity or send and receive
      Messages.  A single stack can be simple (a single transport
      protocol instance over IP), or it can be complex (multiple
      application protocol streams going through a single security and
      transport protocol, over IP; or, a multi-path transport protocol
      over multiple transport sub-flows).

   *  Candidate Path: One path that is available to an application and
      conforms to the Selection Properties and System Policy, of which
      there can be several.  Candidate Paths are identified during the
      gathering phase (Section 4.2.1) and can be used during the racing
      phase (Section 4.2.2).

   *  Candidate Protocol Stack: One Protocol Stack that can be used by
      an application for a Connection, for which there can be several
      candidates.  Candidate Protocol Stacks are identified during the
      gathering phase (Section 4.2.1) and are started during the racing
      phase (Section 4.2.2).

   *  System Policy: The input from an operating system or other global
      preferences that can constrain or influence how an implementation
      will gather candidate paths and Protocol Stacks (Section 4.2.1)
      and race the candidates during establishment (Section 4.2.2).
      Specific aspects of the System Policy either apply to all
      Connections or only certain ones, depending on the runtime context
      and properties of the Connection.

   *  Cached State: The state and history that the implementation keeps
      for each set of associated Endpoints that have been used
      previously.  This can include DNS results, TLS session state,
      previous success and quality of transport protocols over certain
      paths, as well as other information.  This caching does not imply
      that the same decisions are necessarily made for subsequent
      connections, rather, it means that cached state is used by a
      Transport Services Implementation to inform functions such as
      choosing the candidates to be raced, selecting appropriate
      transport parameters, etc.  An application SHOULD NOT rely on
      specific caching behaviour, instead it ought to explicitly request
      any required or desired properties via the Transport Services API.

Pauly, et al.              Expires 12 May 2024                 [Page 29]
Internet-Draft              TAPS Architecture              November 2023

4.2.1.  Candidate Gathering

   *  Candidate Path Selection: Candidate Path Selection represents the
      act of choosing one or more paths that are available to use based
      on the Selection Properties and any available Local and Remote
      Endpoint Identifiers provided by the application, as well as the
      policies and heuristics of a Transport Services implementation.

   *  Candidate Protocol Selection: Candidate Protocol Selection
      represents the act of choosing one or more sets of Protocol Stacks
      that are available to use based on the Transport Properties
      provided by the application, and the heuristics or policies within
      the Transport Services Implementation.

4.2.2.  Candidate Racing

   Connection establishment attempts for a set of candidates may be
   performed simultaneously, synchronously, serially, or using some
   combination of all of these.  We refer to this process as racing,
   borrowing terminology from Happy Eyeballs [RFC8305].

   *  Protocol Option Racing: Protocol Option Racing is the act of
      attempting to establish, or scheduling attempts to establish,
      multiple Protocol Stacks that differ based on the composition of
      protocols or the options used for protocols.

   *  Path Racing: Path Racing is the act of attempting to establish, or
      scheduling attempts to establish, multiple Protocol Stacks that
      differ based on a selection from the available Paths.  Since
      different Paths will have distinct configurations (see [RFC7556])
      for local addresses and DNS servers, attempts across different
      Paths will perform separate DNS resolution steps, which can lead
      to further racing of the resolved Remote Endpoint Identifiers.

   *  Remote Endpoint Racing: Remote Endpoint Racing is the act of
      attempting to establish, or scheduling attempts to establish,
      multiple Protocol Stacks that differ based on the specific
      representation of the Remote Endpoint Identifier, such as a
      particular IP address that was resolved from a DNS hostname.

4.2.3.  Separating Connection Contexts

   A Transport Services Implementation can by default share stored
   properties across Connections within an application, such as cached
   protocol state, cached path state, and heuristics.  This provides
   efficiency and convenience for the application, since the Transport
   Services System can automatically optimize behavior.

Pauly, et al.              Expires 12 May 2024                 [Page 30]
Internet-Draft              TAPS Architecture              November 2023

   The Transport Services API can allow applications to explicitly
   define Connection Contexts that force separation of Cached State and
   Protocol Stacks.  For example, a web browser application could use
   Connection Contexts with separate caches when implementing different
   tabs.  Possible reasons to isolate Connections using separate
   Connection Contexts include:

   *  Privacy concerns about re-using cached protocol state that can
      lead to linkability.  Sensitive state could include TLS session
      state [RFC8446] and HTTP cookies [RFC6265].  These concerns could
      be addressed using Connection Contexts with separate caches, such
      as for different browser tabs.

   *  Privacy concerns about allowing Connections to multiplex together,
      which can tell a Remote Endpoint that all of the Connections are
      coming from the same application.  Using Connection Contexts
      avoids the Connections being multiplexed in a HTTP/2 or QUIC
      stream.

5.  IANA Considerations

   This document has no actions for IANA.

6.  Security and Privacy Considerations

   The Transport Services System does not recommend use of specific
   security protocols or algorithms.  Its goal is to offer ease of use
   for existing protocols by providing a generic security-related
   interface.  Each provided interface translates to an existing
   protocol-specific interface provided by supported security protocols.
   For example, trust verification callbacks are common parts of TLS
   APIs; a Transport Services API exposes similar functionality
   [RFC8922].

   As described above in Section 3.3, if a Transport Services
   Implementation races between two different Protocol Stacks, both need
   to use the same security protocols and options.  However, a Transport
   Services Implementation can race different security protocols, e.g.,
   if the application explicitly specifies that it considers them
   equivalent.

   The application controls whether information from previous racing
   attempts, or other information about past communications that was
   cached by the Transport Services System is used during establishment.
   This allows applications to make tradeoffs between efficiency
   (through racing) and privacy (via information that might leak from
   the cache toward an on-path observer).  Some applications have
   features (e.g. "incognito mode") that align with this functionality.

Pauly, et al.              Expires 12 May 2024                 [Page 31]
Internet-Draft              TAPS Architecture              November 2023

   Applications need to ensure that they use security APIs
   appropriately.  In cases where applications use an interface to
   provide sensitive keying material, e.g., access to private keys or
   copies of pre-shared keys (PSKs), key use needs to be validated and
   scoped to the intended protocols and roles.  For example, if an
   application provides a certificate to only be used as client
   authentication for outbound TLS and QUIC connections, the Transport
   Services System MUST NOT use this automatically in other contexts
   (such as server authentication for inbound connections, or in other
   another security protocol handshake that is not equivalent to TLS).

   A Transport Services System MUST NOT automatically fall back from
   secure protocols to insecure protocols, or to weaker versions of
   secure protocols (see Section 3.3).  For example, if an application
   requests a specific version of TLS, but the desired version of TLS is
   not available, its connection will fail.  As described in
   Section 3.3, the Transport Services API can allow applications to
   specify minimum versions that are allowed to be used by the Transport
   Services System.

7.  Acknowledgements

   This work has received funding from the European Union's Horizon 2020
   research and innovation programme under grant agreements No. 644334
   (NEAT), No. 688421 (MAMI) and No 815178 (5GENESIS).

   This work has been supported by Leibniz Prize project funds of DFG -
   German Research Foundation: Gottfried Wilhelm Leibniz-Preis 2011 (FKZ
   FE 570/4-1).

   This work has been supported by the UK Engineering and Physical
   Sciences Research Council under grant EP/R04144X/1.

   Thanks to Reese Enghardt, Max Franke, Mirja Kuehlewind, Jonathan
   Lennox, and Michael Welzl for the discussions and feedback that
   helped shape the architecture of the system described here.
   Particular thanks is also due to Philipp S.  Tiesel and Christopher
   A.  Wood, who were both co-authors of this specification as it
   progressed through the TAPS working group.  Thanks as well to Stuart
   Cheshire, Josh Graessley, David Schinazi, and Eric Kinnear for their
   implementation and design efforts, including Happy Eyeballs, that
   heavily influenced this work.

8.  References

8.1.  Normative References

Pauly, et al.              Expires 12 May 2024                 [Page 32]
Internet-Draft              TAPS Architecture              November 2023

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/rfc/rfc2119>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/rfc/rfc8174>.

8.2.  Informative References

   [I-D.ietf-taps-impl]
              Brunstrom, A., Pauly, T., Enghardt, R., Tiesel, P. S., and
              M. Welzl, "Implementing Interfaces to Transport Services",
              Work in Progress, Internet-Draft, draft-ietf-taps-impl-16,
              5 June 2023, <https://datatracker.ietf.org/doc/html/draft-
              ietf-taps-impl-16>.

   [I-D.ietf-taps-interface]
              Trammell, B., Welzl, M., Enghardt, R., Fairhurst, G.,
              Kühlewind, M., Perkins, C., Tiesel, P. S., and T. Pauly,
              "An Abstract Application Layer Interface to Transport
              Services", Work in Progress, Internet-Draft, draft-ietf-
              taps-interface-22, 6 July 2023,
              <https://datatracker.ietf.org/doc/html/draft-ietf-taps-
              interface-22>.

   [POSIX]    "IEEE Std. 1003.1-2008 Standard for Information Technology
              -- Portable Operating System Interface (POSIX).  Open
              group Technical Standard: Base Specifications, Issue 7",
              2008.

   [RFC5389]  Rosenberg, J., Mahy, R., Matthews, P., and D. Wing,
              "Session Traversal Utilities for NAT (STUN)", RFC 5389,
              DOI 10.17487/RFC5389, October 2008,
              <https://www.rfc-editor.org/rfc/rfc5389>.

   [RFC5482]  Eggert, L. and F. Gont, "TCP User Timeout Option",
              RFC 5482, DOI 10.17487/RFC5482, March 2009,
              <https://www.rfc-editor.org/rfc/rfc5482>.

   [RFC6265]  Barth, A., "HTTP State Management Mechanism", RFC 6265,
              DOI 10.17487/RFC6265, April 2011,
              <https://www.rfc-editor.org/rfc/rfc6265>.

   [RFC7556]  Anipko, D., Ed., "Multiple Provisioning Domain
              Architecture", RFC 7556, DOI 10.17487/RFC7556, June 2015,
              <https://www.rfc-editor.org/rfc/rfc7556>.

Pauly, et al.              Expires 12 May 2024                 [Page 33]
Internet-Draft              TAPS Architecture              November 2023

   [RFC8095]  Fairhurst, G., Ed., Trammell, B., Ed., and M. Kuehlewind,
              Ed., "Services Provided by IETF Transport Protocols and
              Congestion Control Mechanisms", RFC 8095,
              DOI 10.17487/RFC8095, March 2017,
              <https://www.rfc-editor.org/rfc/rfc8095>.

   [RFC8170]  Thaler, D., Ed., "Planning for Protocol Adoption and
              Subsequent Transitions", RFC 8170, DOI 10.17487/RFC8170,
              May 2017, <https://www.rfc-editor.org/rfc/rfc8170>.

   [RFC8303]  Welzl, M., Tuexen, M., and N. Khademi, "On the Usage of
              Transport Features Provided by IETF Transport Protocols",
              RFC 8303, DOI 10.17487/RFC8303, February 2018,
              <https://www.rfc-editor.org/rfc/rfc8303>.

   [RFC8305]  Schinazi, D. and T. Pauly, "Happy Eyeballs Version 2:
              Better Connectivity Using Concurrency", RFC 8305,
              DOI 10.17487/RFC8305, December 2017,
              <https://www.rfc-editor.org/rfc/rfc8305>.

   [RFC8445]  Keranen, A., Holmberg, C., and J. Rosenberg, "Interactive
              Connectivity Establishment (ICE): A Protocol for Network
              Address Translator (NAT) Traversal", RFC 8445,
              DOI 10.17487/RFC8445, July 2018,
              <https://www.rfc-editor.org/rfc/rfc8445>.

   [RFC8446]  Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
              <https://www.rfc-editor.org/rfc/rfc8446>.

   [RFC8922]  Enghardt, T., Pauly, T., Perkins, C., Rose, K., and C.
              Wood, "A Survey of the Interaction between Security
              Protocols and Transport Services", RFC 8922,
              DOI 10.17487/RFC8922, October 2020,
              <https://www.rfc-editor.org/rfc/rfc8922>.

   [RFC8923]  Welzl, M. and S. Gjessing, "A Minimal Set of Transport
              Services for End Systems", RFC 8923, DOI 10.17487/RFC8923,
              October 2020, <https://www.rfc-editor.org/rfc/rfc8923>.

   [RFC9000]  Iyengar, J., Ed. and M. Thomson, Ed., "QUIC: A UDP-Based
              Multiplexed and Secure Transport", RFC 9000,
              DOI 10.17487/RFC9000, May 2021,
              <https://www.rfc-editor.org/rfc/rfc9000>.

   [RFC9112]  Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke,
              Ed., "HTTP/1.1", STD 99, RFC 9112, DOI 10.17487/RFC9112,
              June 2022, <https://www.rfc-editor.org/rfc/rfc9112>.

Pauly, et al.              Expires 12 May 2024                 [Page 34]
Internet-Draft              TAPS Architecture              November 2023

   [RFC9113]  Thomson, M., Ed. and C. Benfield, Ed., "HTTP/2", RFC 9113,
              DOI 10.17487/RFC9113, June 2022,
              <https://www.rfc-editor.org/rfc/rfc9113>.

   [RFC9293]  Eddy, W., Ed., "Transmission Control Protocol (TCP)",
              STD 7, RFC 9293, DOI 10.17487/RFC9293, August 2022,
              <https://www.rfc-editor.org/rfc/rfc9293>.

Authors' Addresses

   Tommy Pauly (editor)
   Apple Inc.
   One Apple Park Way
   Cupertino, California 95014,
   United States of America
   Email: tpauly@apple.com

   Brian Trammell (editor)
   Google Switzerland GmbH
   Gustav-Gull-Platz 1
   CH- 8004 Zurich
   Switzerland
   Email: ietf@trammell.ch

   Anna Brunstrom
   Karlstad University
   Universitetsgatan 2
   651 88 Karlstad
   Sweden
   Email: anna.brunstrom@kau.se

   Godred Fairhurst
   University of Aberdeen
   Fraser Noble Building
   Aberdeen, AB24 3UE
   Email: gorry@erg.abdn.ac.uk
   URI:   http://www.erg.abdn.ac.uk/

   Colin Perkins
   University of Glasgow
   School of Computing Science
   Glasgow  G12 8QQ
   United Kingdom
   Email: csp@csperkins.org

Pauly, et al.              Expires 12 May 2024                 [Page 35]