Skip to main content

Routing-Related Design Choices for IPv6 Networks
draft-ietf-v6ops-design-choices-12

Document Type Expired Internet-Draft (v6ops WG)
Expired & archived
Authors Philip Matthews , Victor Kuarsingh
Last updated 2017-05-17 (Latest revision 2016-11-13)
Replaces draft-matthews-v6ops-design-guidelines
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status Informational
Formats
Additional resources Mailing list discussion
Stream WG state WG Document
Document shepherd Fred Baker
Shepherd write-up Show Last changed 2015-04-06
IESG IESG state Expired
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to draft-ietf-v6ops-design-choices.all@tools.ietf.org

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This document presents advice on certain routing-related design choices that arise when designing IPv6 networks (both dual-stack and IPv6-only). The intended audience is someone designing an IPv6 network who is knowledgeable about best current practices around IPv4 network design, and wishes to learn the corresponding practices for IPv6.

Authors

Philip Matthews
Victor Kuarsingh

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)