This Internet-Draft is no longer active. Unofficial copies of old Internet-Drafts can be found here:
http://tools.ietf.org/id/draft-ietf-roll-home-routing-reqs.
Abstract:
This document presents requirements specific to home control and automation
applications for Routing Over Low power and Lossy (ROLL) networks. In the near future, many
homes will contain high numbers of wireless devices for a wide set of purposes. Examples
include actuators (relay, light dimmer, heating valve), sensors (wall switch, water leak, blood pressure), and
advanced controllers (radio-frequency-based AV remote control, central server for light and heat control). Because such
devices only cover a limited radio range, routing is often required. The aim of this
document is to specify the routing requirements for networks comprising such constrained
devices in a home-control and automation environment. This document is not an Internet
Standards Track specification; it is published for informational purposes.
Authors:
Jakob Buron <jbu@sdesigns.dk>
Anders Brandt <abr@sdesigns.dk>
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid)
datatracker.ietf.org