IPv6 over Fibre Channel
draft-desanti-ipv6-over-fibre-channel-02
| Document | Type |
Replaced Internet-Draft
(individual in int area)
Expired & archived
|
|
|---|---|---|---|
| Author | Claudio Desanti | ||
| Last updated | 2015-10-14 (Latest revision 2003-06-20) | ||
| Replaced by | draft-ietf-imss-ipv6-over-fibre-channel | ||
| RFC stream | Internet Engineering Task Force (IETF) | ||
| Intended RFC status | Proposed Standard | ||
| Formats | |||
| Stream | WG state | (None) | |
| Document shepherd | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-imss-ipv6-over-fibre-channel | |
| Action Holders |
(None)
|
||
| Consensus boilerplate | Unknown | ||
| Telechat date | (None) | ||
| Responsible AD | Margaret Cullen | ||
| IESG note | |||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Fibre Channel (FC) is a high speed serial interface technology that supports several higher layer protocols including Small Computer System Interface (SCSI) and IPv4, as specified in [IP-FC]. The purpose of this document is to specify a way of encapsulating IP version 6 [IPv6] over Fibre Channel and to describe a method of forming IPv6 link-local addresses [AARCH] and statelessly autoconfigured addresses on Fibre Channel networks. This document also describes the content of the Source/Target Link-layer Address option used in Neighbor Discovery [DISC] when the messages are transmitted on a Fibre Channel network.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)