Version 4.51.p2, 2013-06-11
Report a bug

ADSL MIB (adslmib)

Documents | Charter | History | List Archive » | Tools WG Page »

Group
Name:	ADSL MIB
Acronym:	adslmib
Area:	Operations and Management Area (ops)
State:	Active
Charter:	charter-ietf-adslmib-07 (Approved)
Personnel
Chair:	Menachem Dodge <menachemdodge1@gmail.com>
Area Director:	Benoit Claise <bclaise@cisco.com>
Editors:	Edward Beili <edward.beili@actelis.com> Moti Morgenstern <moti.Morgenstern@ecitele.com> Scott Baillie <scott.baillie@nec.com.au> Umberto Bonollo <umberto.bonollo@nec.com.au>
Mailing List
Address:	adslmib@ietf.org
To Subscribe:	https://www.ietf.org/mailman/listinfo/adslmib
Archive:	http://www.ietf.org/mail-archive/web/adslmib/
Jabber Chat
Room Address:	xmpp:adslmib@jabber.ietf.org
Logs:	http://jabber.ietf.org/logs/adslmib/

Charter for Working Group

The working group will define:

1. A set of managed objects to handle the bonding of xDSL lines
according to the ITU-T Recommendations G.998.1 (ATM), G.998.2 (Ethernet)
and G.998.3 (TDIM). A common MIB module will be developed to handle the
common objects and three specific MIB modules will be developed to
handle the three separate layer-2 technologies. Use will be made of the
ifStack and ifInvStack Tables defined in RFC 2863 and RFC 2864
respectively. Use will also be made of the ifCapStack and ifInvCapStack
tables as defined in RFC 5066. The Broadband forum TR-159 will be used
in the definition of these MIBs.

2. The working group will develop a set of managed objects as an
optional extension to RFC 5650 that shall provide an alternative
approach, known as the "Vector of Profiles", for the configuration of
DSL lines. The Vector of Profiles MIB will be based on the Broadband
Forum TR-165 document. The ITU-T G.997.1 will also be considered in the
definition of this extension.

The MIB modules defined by this group will be generated using SMIv2,
will be consistent with the SNMP management framework, and will
describe the relationship of the objects defined to existing MIBs such
as those described in other work products of this Working Group, the
interfaces MIB, the Ethernet MIB modules and the AToM MIB.

Milestones

Done	Submit Internet-Draft to cover subscriber equipment
Done	Meet at Chicago IETF to review Internet-Drafts
Done	Submit Internet-Draft to IESG for consideration as Proposed Standard.
Done	Meet at Oslo IETF to review new Internet-Drafts and discuss implementation experience on initial MIB
Done	Submit supplementary Internet-Draft to IESG for consideration as Proposed Standard.
Done	Produce Internet-Draft covering HDSL2 management objects.
Done	Submit updated HDSL2/SHDSL Internet-Draft
Done	Complete WG last call for HDSL2/SHDSL management objects
Done	Collect implementation reports for ADSL MIB
Done	Submit HDSL2/SHDSL MIB to IESG for consideration as Proposed Standard
Done	Submit initial Internet-Draft VDSL MIB
Done	Complete WG last call on VDSL MIB
Done	Submit updated VDSL MIB Internet-Draft
Done	Submit final VDSL MIB Internet-Draft
Done	Submit VDSL MIB to IESG for consideration as Proposed Standard
Done	New WG I-Ds for the LCS MCM and SCM MIB modules
Done	Initial WG Internet-Draft covering ADSL2 management objects
Done	Integrate working group changes and produce revised draft
Done	Complete WG last call on ADSL2 MIB
Done	Submit ADSL2 MIB to IESG for consideration as Proposed Standard
Done	Re-charter or close down
Done	Initial WG Internet-Draft covering VDSL2 management objects
Done	Inform the ITU-T and DSL Forum that work on the VDSL2 MIB has begun
Done	Integrate working group changes and produce revised VDSL2 MIB draft
Done	Post Initial Drafts of all the xDsl Bonding MIB drafts
Done	Post Vdsl2 draft version 03
Done	Post Vdsl2 draft version 04.
Done	Complete Thorough Working Group Reviews of the Vdsl2 draft and produce version 05.
Done	Working Group Last Call for the Vdsl2 document.
Done	Early MIB Doctor Reviews of the Vdsl2 draft.
Done	Make Correction to the draft following the review.
Done	Working Group Last Call for the Vdsl2 document following corrections.
Done	Present the Vdsl2 document to the IESG.
Done	Submit updated ATM and Ethernet G.Bond MIB drafts.
Done	Submit G.Bond MIB and TDIM MIB Drafts
Done	Working Group Last Call on all the G. Bond documents.
Done	Submit G.Bond documents to IESG as Proposed Standard
Oct 2012	Initial Vector of Profiles draft to be accepted by the Working Group.
Jan 2013	Submit Vector of Profiles Draft version 01
Apr 2013	Revise the draft and post vector of Profiles draft version 02.
Jul 2013	Post Vector of Profiles Draft version 03.
Oct 2013	Submit Vector of Profiles Draft version 04.
Nov 2013	Working Group Last Call for the Vector of Profiles draft.
Dec 2013	Submit the Vector Of Profile document to the IESG as Proposed Standard.
Dec 2013	Re-charter or close down.