Network Working Group                                           S. Hares
Internet-Draft                                                    Huawei
Intended status: Standards Track                                J. Jeong
Expires: September 24, 2018                                       J. Kim
                                                 Sungkyunkwan University
                                                            R. Moskowitz
                                                          HTT Consulting
                                                                  Q. Lin
                                                                  Huawei
                                                          March 23, 2018


                    I2NSF Capability YANG Data Model
               draft-hares-i2nsf-capability-data-model-07

Abstract

   This document defines a YANG data model for capabilities that enables
   an I2NSF user to control various network security functions in
   network security devices.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on September 24, 2018.

Copyright Notice

   Copyright (c) 2018 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect



Hares, et al.          Expires September 24, 2018               [Page 1]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Requirements Language . . . . . . . . . . . . . . . . . . . .   4
   3.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   4
     3.1.  Tree Diagrams . . . . . . . . . . . . . . . . . . . . . .   4
   4.  Overview  . . . . . . . . . . . . . . . . . . . . . . . . . .   4
   5.  The Structure and Objective of NSF Capabilities . . . . . . .   6
     5.1.  Generic Network Security Function Identification  . . . .   6
     5.2.  Event Capabilities  . . . . . . . . . . . . . . . . . . .   6
     5.3.  Condition Capabilities  . . . . . . . . . . . . . . . . .   7
     5.4.  Action Capabilities . . . . . . . . . . . . . . . . . . .   7
     5.5.  Resolution Strategy Capabilities  . . . . . . . . . . . .   7
     5.6.  Default Action Capabilities . . . . . . . . . . . . . . .   7
     5.7.  RPC for Acquiring Appropriate Network Security Function .   8
   6.  Data Model Structure  . . . . . . . . . . . . . . . . . . . .   8
     6.1.  Network Security Function Identification  . . . . . . . .   8
     6.2.  Capabilities of Generic Network Security Function . . . .   9
       6.2.1.  Event Capabilities  . . . . . . . . . . . . . . . . .   9
       6.2.2.  Condition Capabilities  . . . . . . . . . . . . . . .  11
       6.2.3.  Action Capabilities . . . . . . . . . . . . . . . . .  14
       6.2.4.  Resolution Strategy Capabilities  . . . . . . . . . .  16
       6.2.5.  Default Action Capabilities . . . . . . . . . . . . .  17
       6.2.6.  RPC for Acquiring Appropriate Network Security
               Function  . . . . . . . . . . . . . . . . . . . . . .  17
   7.  YANG Modules  . . . . . . . . . . . . . . . . . . . . . . . .  18
     7.1.  I2NSF Capability YANG Data Module . . . . . . . . . . . .  18
   8.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  53
   9.  Security Considerations . . . . . . . . . . . . . . . . . . .  54
   10. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . .  54
   11. Contributors  . . . . . . . . . . . . . . . . . . . . . . . .  54
   12. References  . . . . . . . . . . . . . . . . . . . . . . . . .  54
     12.1.  Normative References . . . . . . . . . . . . . . . . . .  54
     12.2.  Informative References . . . . . . . . . . . . . . . . .  55
   Appendix A.  Example: Extended VoIP-VoLTE Security Function
                Capabilities Module  . . . . . . . . . . . . . . . .  56
   Appendix B.  Example: Configuration XML of Capability Module  . .  57
     B.1.  Example: Configuration XML of Generic Network Security
           Function Capabilities . . . . . . . . . . . . . . . . . .  57
     B.2.  Example: Configuration XML of Extended VoIP/VoLTE
           Security Function Capabilities Module . . . . . . . . . .  59
   Appendix C.  Changes from draft-hares-i2nsf-capability-data-
                model-06 . . . . . . . . . . . . . . . . . . . . . .  60



Hares, et al.          Expires September 24, 2018               [Page 2]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  60

1.  Introduction

   As the industry becomes more sophisticated and network devices (i.e.,
   IoT, Intelligent Vehicle, and VoIP/VoLTE Phone), service providers
   has a lot of problems [RFC8192].  To resolve this problem,
   [i2nsf-nsf-cap-im] standardize capabilities of network security
   functions.

   This document provides a YANG data model that defines the
   capabilities to express capabilities of security devices.  The
   security devices can register own capabilities to Network Operator
   Mgmt System with this YANG data model through registration interface.
   After the capabilities of the devices are registered, this YANG data
   model can be used by the IN2SF user or Service Function Forwarder
   (SFF) [i2nsf-sfc] to acquire appropriate NSFs that can be controlled
   by the Network Operator Mgmt System.  This document defines a YANG
   [RFC6020] data model based on the [i2nsf-nsf-cap-im].  Terms used in
   document are defined in [i2nsf-terminology].

   The "Event-Condition-Action" (ECA) policy model is used as the basis
   for the design of I2NSF Policy Rules.

   The "ietf-i2nsf-capability" YANG module defined in this document
   provides the following features:

   o  Configuration of identification for generic network security
      function policy

   o  Configuration of event capabilities for generic network security
      function policy

   o  Configuration of condition capabilities for generic network
      security function policy

   o  Configuration of action capabilities for generic network security
      function policy

   o  Configuration of strategy capabilities for generic network
      security function policy

   o  Configuration of default action capabilities for generic network
      security function policy

   o  RPC for acquiring appropriate network security function according
      to type of NSF and/or target devices.




Hares, et al.          Expires September 24, 2018               [Page 3]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


2.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

3.  Terminology

   This document uses the terminology described in [i2nsf-nsf-cap-im]
   [i2rs-rib-data-model][supa-policy-info-model].  Especially, the
   following terms are from [supa-policy-info-model]:

   o  Data Model: A data model is a representation of concepts of
      interest to an environment in a form that is dependent on data
      repository, data definition language, query language,
      implementation language, and protocol.

   o  Information Model: An information model is a representation of
      concepts of interest to an environment in a form that is
      independent of data repository, data definition language, query
      language, implementation language, and protocol.

3.1.  Tree Diagrams

   A simplified graphical representation of the data model is used in
   this document.  The meaning of the symbols in these diagrams
   [i2rs-rib-data-model] is as follows:

   o  Brackets "[" and "]" enclose list keys.

   o  Abbreviations before data node names: "rw" means configuration
      (read-write) and "ro" state data (read-only).

   o  Symbols after data node names: "?" means an optional node and "*"
      denotes a "list" and "leaf-list".

   o  Parentheses enclose choice and case nodes, and case nodes are also
      marked with a colon (":").

   o  Ellipsis ("...") stands for contents of subtrees that are not
      shown.

4.  Overview

   This section explains overview how the YANG data model can be used by
   I2NSF User, Developer's Mgmt System, and SFF.  Figure 1 shows
   capabilities of NSFs in I2NSF Framework.  As shown in this figure,
   Developer's Mgmt System can register NSFs with capabilities that the



Hares, et al.          Expires September 24, 2018               [Page 4]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


   device can support.  To register NSFs in this way, the Developer's
   Mgmt System utilizes this standardized capabilities YANG data model
   through registration interface.  Through this registration of
   capabilities, the a lot of problems [RFC8192] can be resolved.  The
   following shows use cases.

   Note [i2nsf-nsf-yang] is used to configure rules of NSFs in I2NSF
   Framework.

       +-------------------------------------------------------+
       |  I2NSF User (e.g., Overlay Network Mgmt, Enterprise   |
       |  Network Mgmt, another network domain's mgmt, etc.)   |
       +--------------------+----------------------------------+
                            |
  Consumer-Facing Interface |
                            |
                            |                 I2NSF
          +-----------------+------------+ Registration  +-------------+
          | Network Operator Mgmt System |  Interface    | Developer's |
          | (i.e., Security Controller)  | < --------- > | Mgmt System |
          +-----------------+------------+               +-------------+
                            |                          New NSF
                            |                          E = {}
  NSF-Facing Interface      |                          C = {IPv4, IPv6}
                            |                          A = {Allow, Deny}
                            |
       +---------------+----+------------+-----------------+
       |               |                 |                 |
   +---+---+       +---+---+         +---+---+         +---+---+
   | NSF-1 |  ...  | NSF-m |         | NSF-1 |   ...   | NSF-n |  ...
   +-------+       +-------+         +-------+         +-------+
     NSF-1           NSF-m             NSF-1             NSF-n
 E = {}            E = {user}        E = {dev}         E = {time}
 C = {IPv4}        C = {IPv6}        C = {IPv4, IPv6}  C = {IPv4}
 A = {Allow, Deny} A = {Allow, Deny} A = {Allow, Deny} A = {Allow, Deny}

   Developer Mgmt System A            Developer Mgmt System B

             Figure 1: Capabilities of NSFs in I2NSF Framework

   o  If I2NSF User wants to apply rules about blocking malicious users,
      it is a tremendous burden to apply all of these rules to NSFs one
      by one.  This problem can be resolved by standardizing the
      capabilities of NSFs.  If I2NSF User wants to block malicious
      users with IPv6, I2NSF User sends the rules about blocking the
      users to Network Operator Mgmt System.  When the Network Operator
      Mgmt System receives the rules, it sends that rules to appropriate
      NSFs (i.e., NSF-m in Developer Mgmt System A and NSF-1 in



Hares, et al.          Expires September 24, 2018               [Page 5]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


      Developer Mgmt System B) which can support the capabilities (i.e.,
      IPv6).  Therefore, I2NSF User need not consider NSFs where to
      apply the rules.

   o  If NSFs find the malicious packets, it is a tremendous burden for
      I2NSF User to apply the rule about blocking the malicious packets
      to NSFs one by one.  This problem can be resolved by standardizing
      the capabilities of NSFs.  If NSFs find the malicious packets with
      IPv4, they can ask the Network Operator Mgmt System to alter
      specific rules and/or configurations.  When the Network Operator
      Mgmt System receives the rules for malicious packets, it inspects
      whether the rules are reasonable and sends the rules to
      appropriate NSFs (i.e., NSF-1 in Developer Mgmt System A and NSF-1
      and NSF-n in Developer Mgmt System B) which can support the
      capabilities (i.e., IPv4).  Therefore, the new rules can be
      applied to appropriate NSFs without control of I2NSF USer.

   o  If NSFs of Service Function Chaining (SFC) [i2nsf-sfc] fail, it is
      a tremendous burden for I2NSF User to reconfigure the policy of
      SFC immediately.  This problem can be resolved by periodically
      acquiring information of appropriate NSFs of SFC.  If SFF needs
      information of Web Application Firewall for SFC, it can ask the
      Network Operator Mgmt System to acquire the location information
      of appropriate Web Application Firewall.  When the Network
      Operator Mgmt System receives requested information from SFF, it
      sends location information of Web Application Firewall to the SFF.
      Therefore, the policy about the NSFs of SFC can be periodically
      updated without control of I2NSF USer.

5.  The Structure and Objective of NSF Capabilities

5.1.  Generic Network Security Function Identification

   This shows a identification for generic network security functions.
   These objects are defined as location information and target device
   information.

5.2.  Event Capabilities

   This shows a event capabilities for generic network security
   functions policy.  This is used to specify capabilities about any
   important occurrence in time of a change in the system being managed,
   and/or in the environment of the system being managed.  When used in
   the context of I2NSF Policy Rules, it is used to determine whether
   the Condition clause of the I2NSF Policy Rule can be evaluated or
   not.  These object of event capabilities is defined as user security
   event capabilities, device security event capabilities, system
   security event capabilities, and time security event capabilities.



Hares, et al.          Expires September 24, 2018               [Page 6]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


   These object of event capabilities can be extended according to
   specific vendor event features.

5.3.  Condition Capabilities

   This shows a condition capabilities for generic network security
   functions policy.  This is used to specify capabilities about a set
   of attributes, features, and/or values that are to be compared with a
   set of known attributes, features, and/or values in order to
   determine whether or not the set of Actions in that (imperative)
   I2NSF Policy Rule can be executed or not.  These object of condition
   capabilities is defined as packet security condition capabilities,
   packet payload security condition capabilities, target security
   condition capabilities, user security condition capabilities, context
   condition capabilities, and generic context condition capabilities.
   These object of condition capabilities can be extended according to
   specific vendor condition features.

5.4.  Action Capabilities

   This shows a action capabilities for generic network security
   functions policy.  This is used to specify capabilities to control
   and monitor aspects of flow-based NSFs when the event and condition
   clauses are satisfied.  NSFs provide security functions by executing
   various Actions.  These object of action capabilities is defined as
   ingress action capabilities, egress action capabilities, and apply
   profile action capabilities.  These object of action capabilities can
   be extended according to specific vendor action features.

5.5.  Resolution Strategy Capabilities

   This shows a resolution strategy capabilities for generic network
   security functions policy.  This can be used to specify capabilities
   how to resolve conflicts that occur between the actions of the same
   or different policy rules that are matched and contained in this
   particular NSF.  These objects are defined as first-matching-rule
   capability and last-matching-rule capability.  These objects can be
   extended according to specific vendor resolution strategy features.

5.6.  Default Action Capabilities

   This shows a default action policy for generic network security
   functions.  This can be used to specify capabilities about a
   predefined action when no other alternative action was matched by the
   currently executing I2NSF Policy Rule.






Hares, et al.          Expires September 24, 2018               [Page 7]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


5.7.  RPC for Acquiring Appropriate Network Security Function

   This shows a RPC for acquiring an appropriate network security
   function according to type of NSF and/or target devices.  If the SFF
   [i2nsf-sfc]does not have the location information of network security
   functions that it should send in own cache table, this can be used to
   acquire the information.  These objects are defined as input data
   (i.e., NSF type and target devices) and output data (i.e., location
   information of NSF).

6.  Data Model Structure

   This section shows an overview of a structure tree of capabilities
   for generic network security functions, as defined in the
   [i2nsf-nsf-cap-im].

6.1.  Network Security Function Identification

   The data model for network security function identification has the
   following structure:

   module: ietf-i2nsf-capability
       +--rw nsf* [nsf-name]
          +--rw nsf-name                    string
          +--rw nsf-type?                   nsf-type
          +--rw nsf-address
          |  +--rw (nsf-address-type)?
          |     +--:(ipv4-address)
          |     |  +--rw ipv4-address    inet:ipv4-address
          |     +--:(ipv6-address)
          |        +--rw ipv6-address    inet:ipv6-address
          +--rw target-device
          |  +--rw pc?                 boolean
          |  +--rw mobile-phone?       boolean
          |  +--rw voip-volte-phone?   boolean
          |  +--rw tablet?             boolean
          |  +--rw iot?                boolean
          |  +--rw vehicle?            boolean
          +--rw generic-nsf-capabilities
          |  +--rw net-sec-capabilities
          |     uses net-sec-caps
          +--rw complete-nsf-capabilities
             +--rw con-sec-control-capabilities
             |  uses i2nsf-con-sec-control-caps
             +--rw attack-mitigation-capabilities
                uses i2nsf-attack-mitigation-control-caps

           Figure 2: Data Model Structure for NSF-Identification



Hares, et al.          Expires September 24, 2018               [Page 8]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


   This draft also utilizes the concepts originated in Basile, Lioy,
   Pitscheider, and Zhao[2015] concerning conflict resolution, use of
   external data, and target device.  The authors are grateful to
   Cataldo for pointing out this excellent work.

   The nsf-type object can be used for configuration about type of a
   NSF.  The types of NSF consists of Network Firewall, Web Application
   Firewall, Anti-Virus, IDS, IPS, and DDoS Mitigator.  The nsf-address
   object can be used for configuration about location of a NSF.  The
   target-device object can be used for configuration about target
   devices.  We will add additional type of a NSF for more generic
   network security functions.

6.2.  Capabilities of Generic Network Security Function

   The data model for Generic NSF capabilities has the following
   structure:

          +--rw generic-nsf-capabilities
             +--rw net-sec-capabilities
                uses i2nsf-net-sec-caps

    Figure 3: Data Model Structure for Capabilities of Network Security
                                 Function

6.2.1.  Event Capabilities

   The data model for event capabilities has the following structure:


     +--rw i2nsf-net-sec-caps
             +--rw net-sec-capabilities* [nsc-capabilities-name]
                +--rw nsc-capabilities-name    string
                +--rw rule-description?        boolean
                +--rw rule-rev?                boolean
                +--rw rule-priority?           boolean
                +--rw time
                |  +--rw time-zone
                |  |  +--rw time-zone-offset   boolean
                |  +--rw time-interval
                |     +--rw absolute-time-interval
                |     |  +--rw start-time?   boolean
                |     |  +--rw end-time?   boolean
                |     +--rw periodic-time-interval
                |        +--rw day?    boolean
                |        +--rw month?  boolean
                +--rw event
                |  +--rw (event-type)?



Hares, et al.          Expires September 24, 2018               [Page 9]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                |     +--:(usr-event)
                |     |  +--rw usr-manual?                    string
                |     |  +--rw usr-sec-event-content?         boolean
                |     |  +--rw usr-sec-event-format
                |     |  |  +--rw unknown?   boolean
                |     |  |  +--rw guid?      boolean
                |     |  |  +--rw uuid?      boolean
                |     |  |  +--rw uri?       boolean
                |     |  |  +--rw fqdn?      boolean
                |     |  |  +--rw fqpn?      boolean
                |     |  +--rw usr-sec-event-type
                |     |     +--rw unknown?                 boolean
                |     |     +--rw user-created?            boolean
                |     |     +--rw user-grp-created?        boolean
                |     |     +--rw user-deleted?            boolean
                |     |     +--rw user-grp-deleted?        boolean
                |     |     +--rw user-logon?              boolean
                |     |     +--rw user-logoff?             boolean
                |     |     +--rw user-access-request?     boolean
                |     |     +--rw user-access-granted?     boolean
                |     |     +--rw user-access-violation?   boolean
                |     +--:(dev-event)
                |     |  +--rw dev-manual?                    string
                |     |  +--rw dev-sec-event-content          boolean
                |     |  +--rw dev-sec-event-format
                |     |  |  +--rw unknown?   boolean
                |     |  |  +--rw guid?      boolean
                |     |  |  +--rw uuid?      boolean
                |     |  |  +--rw uri?       boolean
                |     |  |  +--rw fqdn?      boolean
                |     |  |  +--rw fqpn?      boolean
                |     |  +--rw dev-sec-event-type
                |     |  |  +--rw unknown?                    boolean
                |     |  |  +--rw comm-alarm?                 boolean
                |     |  |  +--rw quality-of-service-alarm?   boolean
                |     |  |  +--rw process-err-alarm?          boolean
                |     |  |  +--rw equipment-err-alarm?        boolean
                |     |  |  +--rw environmental-err-alarm?    boolean
                |     |  +--rw dev-sec-event-type-severity
                |     |     +--rw unknown?         boolean
                |     |     +--rw cleared?         boolean
                |     |     +--rw indeterminate?   boolean
                |     |     +--rw critical?        boolean
                |     |     +--rw major?           boolean
                |     |     +--rw minor?           boolean
                |     |     +--rw warning?         boolean
                |     +--:(sys-event)
                |     |  +--rw sys-manual?                    string



Hares, et al.          Expires September 24, 2018              [Page 10]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                |     |  +--rw sys-sec-event-content?         boolean
                |     |  +--rw sys-sec-event-format
                |     |  |  +--rw unknown?   boolean
                |     |  |  +--rw guid?      boolean
                |     |  |  +--rw uuid?      boolean
                |     |  |  +--rw uri?       boolean
                |     |  |  +--rw fqdn?      boolean
                |     |  |  +--rw fqpn?      boolean
                |     |  +--rw sys-sec-event-type
                |     |     +--rw unknown?                boolean
                |     |     +--rw audit-log-written-to?   boolean
                |     |     +--rw audit-log-cleared?      boolean
                |     |     +--rw policy-created?         boolean
                |     |     +--rw policy-edited?          boolean
                |     |     +--rw policy-deleted?         boolean
                |     |     +--rw policy-executed?        boolean
                |     +--:(time-event)
                |        +--rw time-manual?                   string
                |        +--rw time-sec-event-begin?          boolean
                |        +--rw time-sec-event-end?            boolean
                |        +--rw time-sec-event-time-zone?      boolean
                +--rw condition
                |  ...
               +--rw action
                |  ...
                +--rw resolution-strategy
                |  ...
                +--rw default-action
                     ...

     Figure 4: Data Model Structure for Event Capabilities of Network
                             Security Function

   These objects are defined as capabilities of user security event,
   device security event, system security event, and time security
   event.  These objects can be extended according to specific vendor
   event features.  We will add additional event objects for more
   generic network security functions.

6.2.2.  Condition Capabilities

   The data model for condition capabilities has the following
   structure:


 +--rw i2nsf-net-sec-caps
       +--rw net-sec-capabilities* [nsc-capabilities-name]
          +--rw nsc-capabilities-name    string



Hares, et al.          Expires September 24, 2018              [Page 11]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


          +--rw rule-description?        boolean
          +--rw rule-rev?                boolean
          +--rw time
          |  +--rw time-zone
          |  |  +--rw time-zone-offset   boolean
          |  +--rw time-interval
          |     +--rw absolute-time-interval
          |     |  +--rw start-time?   boolean
          |     |  +--rw end-time?   boolean
          |     +--rw periodic-time-interval
          |        +--rw day?    boolean
          |        +--rw month?  boolean
          +--rw event
          |  ...
          +--rw condition
          |  +--rw (condition-type)?
          |     +--:(packet-security-condition)
          |     |  +--rw packet-manual?                    string
          |     |  +--rw packet-security-mac-condition
          |     |  |  +--rw pkt-sec-cond-mac-dest?         boolean
          |     |  |  +--rw pkt-sec-cond-mac-src?          boolean
          |     |  |  +--rw pkt-sec-cond-mac-8021q?        boolean
          |     |  |  +--rw pkt-sec-cond-mac-ether-type?   boolean
          |     |  |  +--rw pkt-sec-cond-mac-tci?          string
          |     |  +--rw packet-security-ipv4-condition
          |     |  |  +--rw pkt-sec-cond-ipv4-header-length?     boolean
          |     |  |  +--rw pkt-sec-cond-ipv4-tos?               boolean
          |     |  |  +--rw pkt-sec-cond-ipv4-total-length?      boolean
          |     |  |  +--rw pkt-sec-cond-ipv4-id?                boolean
          |     |  |  +--rw pkt-sec-cond-ipv4-fragment?          boolean
          |     |  |  +--rw pkt-sec-cond-ipv4-fragment-offset?   boolean
          |     |  |  +--rw pkt-sec-cond-ipv4-ttl?               boolean
          |     |  |  +--rw pkt-sec-cond-ipv4-protocol?          boolean
          |     |  |  +--rw pkt-sec-cond-ipv4-src?               boolean
          |     |  |  +--rw pkt-sec-cond-ipv4-dest?              boolean
          |     |  |  +--rw pkt-sec-cond-ipv4-ipopts?            boolean
          |     |  |  +--rw pkt-sec-cond-ipv4-sameip?            boolean
          |     |  |  +--rw pkt-sec-cond-ipv4-geoip?             boolean
          |     |  +--rw packet-security-ipv6-condition
          |     |  |  +--rw pkt-sec-cond-ipv6-dscp?             boolean
          |     |  |  +--rw pkt-sec-cond-ipv6-ecn?              boolean
          |     |  |  +--rw pkt-sec-cond-ipv6-traffic-class?    boolean
          |     |  |  +--rw pkt-sec-cond-ipv6-flow-label?       boolean
          |     |  |  +--rw pkt-sec-cond-ipv6-payload-length?   boolean
          |     |  |  +--rw pkt-sec-cond-ipv6-next-header?      boolean
          |     |  |  +--rw pkt-sec-cond-ipv6-hop-limit?        boolean
          |     |  |  +--rw pkt-sec-cond-ipv6-src?              boolean
          |     |  |  +--rw pkt-sec-cond-ipv6-dest?             boolean



Hares, et al.          Expires September 24, 2018              [Page 12]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


          |     |  +--rw packet-security-tcp-condition
          |     |  |  +--rw pkt-sec-cond-tcp-src-port?         boolean
          |     |  |  +--rw pkt-sec-cond-tcp-dest-port?         boolean
          |     |  |  +--rw pkt-sec-cond-tcp-seq-num?       boolean
          |     |  |  +--rw pkt-sec-cond-tcp-ack-num?       boolean
          |     |  |  +--rw pkt-sec-cond-tcp-window-size?   boolean
          |     |  |  +--rw pkt-sec-cond-tcp-flags?         boolean
          |     |  +--rw packet-security-udp-condition
          |     |  |  +--rw pkt-sec-cond-udp-src-port?         boolean
          |     |  |  +--rw pkt-sec-cond-udp-dest-port?        boolean
          |     |  |  +--rw pkt-sec-cond-udp-length?   boolean
          |     |  +--rw packet-security-icmp-condition
          |     |     +--rw pkt-sec-cond-icmp-type?      boolean
          |     |     +--rw pkt-sec-cond-icmp-code?      boolean
          |     |     +--rw pkt-sec-cond-icmp-seg-num?   boolean
          |     +--:(packet-payload-condition)
          |     |  +--rw packet-payload-manual?            string
          |     |  +--rw pkt-payload-content?              boolean
          |     +--:(target-condition)
          |     |  +--rw target-manual?                    string
          |     |  +--rw device-sec-context-cond?          boolean
          |     +--:(users-condition)
          |     |  +--rw users-manual?                     string
          |     |  +--rw user
          |     |  |  +--rw (user-name)?
          |     |  |     +--:(tenant)
          |     |  |     |  +--rw tenant?   boolean
          |     |  |     +--:(vn-id)
          |     |  |        +--rw vn-id?    boolean
          |     |  +--rw group
          |     |     +--rw (group-name)?
          |     |        +--:(tenant)
          |     |        |  +--rw tenant?   boolean
          |     |        +--:(vn-id)
          |     |           +--rw vn-id?    boolean
          |     +--:(context-condition)
          |     |  +--rw context-manual?                   string
          |     +--:(gen-context-condition)
          |        +--rw gen-context-manual?               string
          |        +--rw geographic-location
          |           +--rw src-geographic-location?    boolean
          |           +--rw dest-geographic-location?   boolean
          +--rw action
          |  ...
          +--rw resolution-strategy
          |  ...
          +--rw default-action
             ...



Hares, et al.          Expires September 24, 2018              [Page 13]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


   Figure 5: Data Model Structure for Condition Capabilities of Network
                             Security Function

   These objects are defined as capabilities of packet security
   condition, packet payload security condition, target security
   condition, user security condition, context condition, and generic
   context condition.  These objects can be extended according to
   specific vendor condition features.  We will add additional condition
   objects for more generic network security functions.

6.2.3.  Action Capabilities

   The data model for action capabilities has the following structure:






































Hares, et al.          Expires September 24, 2018              [Page 14]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


   +--rw i2nsf-net-sec-caps
         +--rw net-sec-capabilities* [nsc-capabilities-name]
            +--rw nsc-capabilities-name    string
            +--rw rule-description?        boolean
            +--rw rule-rev?                boolean
            +--rw rule-priority?           boolean
            +--rw time
            |  +--rw time-zone
            |  |  +--rw time-zone-offset   boolean
            |  +--rw time-interval
            |     +--rw absolute-time-interval
            |     |  +--rw start-time?   boolean
            |     |  +--rw end-time?   boolean
            |     +--rw periodic-time-interval
            |        +--rw day?    boolean
            |        +--rw month?  boolean
            +--rw event
            |  ...
            +--rw condition
            |  ...
            +--rw action
            |  +--rw (action-type)?
            |     +--:(ingress-action)
            |     |  +--rw ingress-manual?        string
            |     |  +--rw ingress-action-type
            |     |     +--rw pass?     boolean
            |     |     +--rw drop?     boolean
            |     |     +--rw reject?   boolean
            |     |     +--rw alert?    boolean
            |     |     +--rw mirror?   boolean
            |     +--:(egress-action)
            |        +--rw egress-manual?         string
            |        +--rw egress-action-type
            |           +--rw invoke-signaling?       boolean
            |           +--rw tunnel-encapsulation?   boolean
            |           +--rw forwarding?             boolean
            |           +--rw redirection?            boolean
            +--rw resolution-strategy
            |     ...
            +--rw default-action
                  ...

     Figure 6: Data Model Structure for Action Capabilities of Network
                             Security Function

   These objects are defined capabilities as ingress action, egress
   action, and apply profile action.  These objects can be extended




Hares, et al.          Expires September 24, 2018              [Page 15]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


   according to specific vendor action feature.  We will add additional
   action objects for more generic network security functions.

6.2.4.  Resolution Strategy Capabilities

   The data model for resolution strategy capabilities has the following
   structure:


   +--rw i2nsf-net-sec-caps
         +--rw net-sec-capabilities* [nsc-capabilities-name]
            +--rw nsc-capabilities-name    string
            +--rw rule-description?        boolean
            +--rw rule-rev?                boolean
            +--rw rule-priority?           boolean
            +--rw time
            |  +--rw time-zone
            |  |  +--rw time-zone-offset   boolean
            |  +--rw time-interval
            |     +--rw absolute-time-interval
            |     |  +--rw start-time?   boolean
            |     |  +--rw end-time?   boolean
            |     +--rw periodic-time-interval
            |        +--rw day?    boolean
            |        +--rw month?  boolean
            +--rw event
            |  ...
            +--rw condition
            |  ...
            +--rw action
            |  ...
            +--rw resolution-strategy
            |  +--rw first-matching-rule?   boolean
            |  +--rw last-matching-rule?    boolean
            +--rw default-action
                  ...

    Figure 7: Data Model Structure for Resolution Strategy Capabilities
                       of Network Security Function

   These objects are defined capabilities as first-matching-rule and
   last-matching-rule.  These objects can be extended according to
   specific vendor resolution strategy features.  We will add additional
   resolution strategy objects for more generic network security
   functions.






Hares, et al.          Expires September 24, 2018              [Page 16]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


6.2.5.  Default Action Capabilities

   The data model for default action capabilities has the following
   structure:


   +--rw i2nsf-net-sec-caps
         +--rw net-sec-capabilities* [nsc-capabilities-name]
            +--rw nsc-capabilities-name    string
            +--rw rule-description?        boolean
            +--rw rule-rev?                boolean
            +--rw rule-priority?           boolean
            +--rw time
            |  +--rw time-zone
            |  |  +--rw time-zone-offset   boolean
            |  +--rw time-interval
            |     +--rw absolute-time-interval
            |     |  +--rw start-time?   boolean
            |     |  +--rw end-time?   boolean
            |     +--rw periodic-time-interval
            |        +--rw day?    boolean
            |        +--rw month?  boolean
            +--rw event
            |  ...
            +--rw condition
            |  ...
            +--rw action
            |  ...
            +--rw resolution-strategy
            |  ...
            +--rw default-action
               +--rw default-action-type
                  +--rw ingress-action-type
                     +--rw pass?     boolean
                     +--rw drop?     boolean
                     +--rw reject?   boolean
                     +--rw alert?    boolean
                     +--rw mirror?   boolean

     Figure 8: Data Model Structure for Default Action Capabilities of
                         Network Security Function

6.2.6.  RPC for Acquiring Appropriate Network Security Function

   The data model for RPC for Acquiring Appropriate Network Security
   Function has the following structure:





Hares, et al.          Expires September 24, 2018              [Page 17]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


     rpcs:
       +---x call-appropriate-nsf
          +---w input
          |  +---w nsf-type         nsf-type
          |  +---w target-device
          |     +---w pc?                 boolean
          |     +---w mobile-phone?       boolean
          |     +---w voip-volte-phone?   boolean
          |     +---w tablet?             boolean
          |     +---w iot?                boolean
          |     +---w vehicle?            boolean
          +--ro output
             +--ro nsf-address
                +--ro (nsf-address-type)?
                   +--:(ipv4-address)
                   |  +--ro ipv4-address    inet:ipv4-address
                   +--:(ipv6-address)
                      +--ro ipv6-address    inet:ipv6-address

     Figure 9: RPC for Acquiring Appropriate Network Security Function

   This shows a RPC for acquiring an appropriate network security
   function according to type of NSF and/or target devices.  If the SFF
   [i2nsf-sfc]does not have the location information of network security
   functions that it should send in own cache table, this can be used to
   acquire the information.  These objects are defined as input data
   (i.e., NSF type and target devices) and output data (i.e., location
   information of NSF).

7.  YANG Modules

7.1.  I2NSF Capability YANG Data Module

   This section introduces a YANG module for the information model of
   network security functions, as defined in the [i2nsf-nsf-cap-im].

  <CODE BEGINS> file "ietf-i2nsf-capability@2018-03-23.yang"


  module ietf-i2nsf-capability {
    namespace
      "urn:ietf:params:xml:ns:yang:ietf-i2nsf-capability";
    prefix
      i2nsf-capability;

    import ietf-inet-types{
      prefix inet;
    }



Hares, et al.          Expires September 24, 2018              [Page 18]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


    organization
      "IETF I2NSF (Interface to Network Security Functions)
       Working Group";

    contact
      "WG Web: <http://tools.ietf.org/wg/i2nsf>
       WG List: <mailto:i2nsf@ietf.org>

       WG Chair: Adrian Farrel
       <mailto:Adrain@olddog.co.uk>

       WG Chair: Linda Dunbar
       <mailto:Linda.duhbar@huawei.com>

       Editor: Susan Hares
       <mailto:shares@ndzh.com>

       Editor: Jaehoon Paul Jeong
       <mailto:pauljeong@skku.edu>

       Editor: Jinyong Tim Kim
       <mailto:timkim@skku.edu>";

    description
      "This module describes a capability model
      for I2NSF devices.";

    revision "2018-03-23"{
      description "The fifth revision";
      reference
        "draft-ietf-i2nsf-capability-00";
    }



    grouping i2nsf-nsf-location {
      description
        "This provides a location for capabilities.";
      container nsf-address {
        description
         "This is location information for capabilities.";
        choice nsf-address-type {
          description
            "nsf address type: ipv4 and ipv4";
          case ipv4-address {
            description
              "ipv4 case";
            leaf ipv4-address {



Hares, et al.          Expires September 24, 2018              [Page 19]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


              type inet:ipv4-address;
              mandatory true;
              description
                "nsf address type is ipv4";
            }
          }
          case ipv6-address {
            description
              "ipv6 case";
            leaf ipv6-address {
              type inet:ipv6-address;
              mandatory true;
              description
                "nsf address type is ipv6";
            }
          }
        }
      }
    }

    typedef nsf-type {
        type enumeration {
          enum network-firewall {
            description
              "If type of a NSF is Network Firewall.";
          }

          enum web-app-firewall {
            description
              "If type of a NSF is Web Application
              Firewall.";
          }

          enum anti-virus {
            description
              "If type of a NSF is Anti-Virus";
          }

          enum ids {
            description
              "If type of a NSF is IDS.";
          }

          enum ips {
            description
              "If type of a NSF is IPS.";
          }




Hares, et al.          Expires September 24, 2018              [Page 20]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


          enum ddos-mitigator {
            description
              "If type of a NSF is DDoS Mitigator.";
          }
        }
        description
          "This is used for type of NSF.";
    }

    grouping i2nsf-it-resources {
      description
        "This provides a link between capabilities
         and IT resources. This has a list of IT resources
         by name.";
      container target-device {
        description
          "it-resources";

        leaf pc {
          type boolean;
          description
            "If type of a device is PC.";
        }

        leaf mobile-phone {
          type boolean;
          description
            "If type of a device is mobile-phone.";
        }

        leaf voip-volte-phone {
          type boolean;
          description
            "If type of a device is voip-volte-phone.";
        }

        leaf tablet {
          type boolean;
          description
            "If type of a device is tablet.";
        }


        leaf iot {
          type boolean;
          description
            "If type of a device is Internet of Things.";
        }



Hares, et al.          Expires September 24, 2018              [Page 21]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


        leaf vehicle {
          type boolean;
          description
            "If type of a device is vehicle.";
        }

      }
    }

    grouping capabilities-information {
      description
        "This includes information of capabilities.";

      leaf nsf-type {
        type nsf-type;
        description
          "This is type of NSF.";
      }
      uses i2nsf-nsf-location;
      uses i2nsf-it-resources;
    }

    grouping i2nsf-net-sec-caps {
      description
        "i2nsf-net-sec-caps";
      list net-sec-capabilities {
        key "nsc-capabilities-name";
        description
          "net-sec-capabilities";
        leaf nsc-capabilities-name {
          type string;
          mandatory true;
          description
            "nsc-capabilities-name";
        }

        leaf rule-description {
          type boolean;
          description
            "This is rule-description.";
        }
        leaf rule-rev {
          type boolean;
          description
            "This is rule-revision";
        }
        leaf rule-priority {
          type boolean;



Hares, et al.          Expires September 24, 2018              [Page 22]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


          description
            "This is rule-priority";
        }

        container time {
            description
              "This is capabilities for time";
            container time-zone {
              description
                "This can be used to apply rules
                according to time zone";

              leaf time-zone-offset {
                type boolean;
                description
                  "This is offset for UTC time zone";
              }

            }

            container time-inteval {
              description
                "This can be used to apply rules
                according to time inteval";
              container absolute-time-inteval {
                description
                  "This can be used to apply rules according to
                   absolute time inteval";
                leaf start-time {
                  type boolean;
                  description
                    "This is start time for absolute time inteval";
                }
                leaf end-time {
                  type boolean;
                  description
                    "This is end time for absolute time inteval";
                }
              }
              container periodic-time-inteval {
                description
                  "This can be used to apply rules according to
                   periodic time inteval";
                leaf day {
                  type boolean;
                  description
                    "This is day for periodic time inteval";
                }



Hares, et al.          Expires September 24, 2018              [Page 23]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                leaf month {
                  type boolean;
                  description
                    "This is month for periodic time inteval";
                }
              }
            }
        }

        container event {
          description
            " This is abstract. An event is defined as any important
              occurrence in time of a change in the system being
              managed, and/or in the environment of the system being
              managed. When used in the context of policy rules for
              a flow-based NSF, it is used to determine whether the
              Condition clause of the Policy Rule can be evaluated
              or not. Examples of an I2NSF event include time and
              user actions (e.g., logon, logoff, and actions that
              violate any ACL.).";


          choice event-type {
            description
              "Vendors can use YANG data model to configure rules
              by concreting this event type";
            case usr-event {
              leaf usr-manual {
                type string;
                description
                  "This is manual for user event.
                  Vendors can write instructions for user event
                  that vendor made";
              }

              leaf usr-sec-event-content {
                type boolean;
                description
                 "This is a mandatory string that contains the content
                  of the UserSecurityEvent. The format of the content
                  is specified in the usrSecEventFormat class
                  attribute, and the type of event is defined in the
                  usrSecEventType class attribute. An example of the
                  usrSecEventContent attribute is a string hrAdmin,
                  with the usrSecEventFormat set to 1 (GUID) and the
                  usrSecEventType attribute set to 5 (new logon).";
              }




Hares, et al.          Expires September 24, 2018              [Page 24]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


              container usr-sec-event-format {
                description
                 "This is a mandatory uint 8 enumerated integer, which
                  is used to specify the data type of the
                  usrSecEventContent attribute. The content is
                  specified in the usrSecEventContent class attribute,
                  and the type of event is defined in the
                  usrSecEventType class attribute. An example of the
                  usrSecEventContent attribute is string hrAdmin,
                  with the usrSecEventFormat attribute set to 1 (GUID)
                  and the usrSecEventType attribute set to 5
                  (new logon).";
                leaf unknown {
                  type boolean;
                  description
                    "If SecEventFormat is unknown";
                }
                leaf guid {
                  type boolean;
                  description
                    "If SecEventFormat is GUID
                    (Generic Unique IDentifier)";
                }
                leaf uuid {
                  type boolean;
                  description
                    "If SecEventFormat is UUID
                    (Universal Unique IDentifier)";
                }
                leaf uri {
                  type boolean;
                  description
                    "If SecEventFormat is URI
                    (Uniform Resource Identifier)";
                }
                leaf fqdn {
                  type boolean;
                  description
                    "If SecEventFormat is FQDN
                    (Fully Qualified Domain Name)";
                }
                leaf fqpn {
                  type boolean;
                  description
                    "If SecEventFormat is FQPN
                    (Fully Qualified Path Name)";
                }
              }



Hares, et al.          Expires September 24, 2018              [Page 25]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


              container usr-sec-event-type {
                leaf unknown {
                    type boolean;
                    description
                      "If usrSecEventType is unknown";
                }
                leaf user-created {
                    type boolean;
                    description
                      "If usrSecEventType is new user
                      created";
                }
                leaf user-grp-created {
                    type boolean;
                    description
                      "If usrSecEventType is new user
                      group created";
                }
                leaf user-deleted {
                    type boolean;
                    description
                      "If usrSecEventType is user
                      deleted";
                }
                leaf user-grp-deleted {
                    type boolean;
                    description
                      "If usrSecEventType is user
                      group deleted";
                }
                leaf user-logon {
                    type boolean;
                    description
                      "If usrSecEventType is user
                      logon";
                }
                leaf user-logoff {
                    type boolean;
                    description
                      "If usrSecEventType is user
                      logoff";
                }
                leaf user-access-request {
                    type boolean;
                    description
                      "If usrSecEventType is user
                      access request";
                }



Hares, et al.          Expires September 24, 2018              [Page 26]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                leaf user-access-granted {
                    type boolean;
                    description
                      "If usrSecEventType is user
                      granted";
                }
                leaf user-access-violation {
                    type boolean;
                    description
                      "If usrSecEventType is user
                      violation";
                }
                description
                 "This is a mandatory uint 8 enumerated integer, which
                  is used to specify the type of event that involves
                  this user. The content and format are specified in
                  the usrSecEventContent and usrSecEventFormat class
                  attributes, respectively. An example of the
                  usrSecEventContent attribute is string hrAdmin,
                  with the usrSecEventFormat attribute set to 1 (GUID)
                  and the usrSecEventType attribute set to 5
                 (new logon).";
              }


            }
            case dev-event {
              leaf dev-manual {
                type string;
                description
                  "This is manual for device event.
                  Vendors can write instructions for device event
                  that vendor made";
              }

              leaf dev-sec-event-content {
                type boolean;
                mandatory true;
                description
                 "This is a mandatory string that contains the content
                  of the DeviceSecurityEvent. The format of the
                  content is specified in the devSecEventFormat class
                  attribute, and the type of event is defined in the
                  devSecEventType class attribute. An example of the
                  devSecEventContent attribute is alarm, with the
                  devSecEventFormat attribute set to 1 (GUID), the
                  devSecEventType attribute set to 5 (new logon).";
              }



Hares, et al.          Expires September 24, 2018              [Page 27]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


              container dev-sec-event-format {
                description
                 "This is a mandatory uint 8 enumerated integer,
                  which is used to specify the data type of the
                  devSecEventContent attribute.";

                leaf unknown {
                  type boolean;
                  description
                    "If SecEventFormat is unknown";
                }
                leaf guid {
                  type boolean;
                  description
                    "If SecEventFormat is GUID
                    (Generic Unique IDentifier)";
                }
                leaf uuid {
                  type boolean;
                  description
                    "If SecEventFormat is UUID
                    (Universal Unique IDentifier)";
                }
                leaf uri {
                  type boolean;
                  description
                    "If SecEventFormat is URI
                    (Uniform Resource Identifier)";
                }
                leaf fqdn {
                  type boolean;
                  description
                    "If SecEventFormat is FQDN
                    (Fully Qualified Domain Name)";
                }
                leaf fqpn {
                  type boolean;
                  description
                    "If SecEventFormat is FQPN
                    (Fully Qualified Path Name)";
                }
              }

              container dev-sec-event-type {
                description
                 "This is a mandatory uint 8 enumerated integer,
                  which is used to specify the type of event
                  that was generated by this device.";



Hares, et al.          Expires September 24, 2018              [Page 28]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                leaf unknown {
                    type boolean;
                    description
                      "If devSecEventType is unknown";
                }
                leaf comm-alarm {
                    type boolean;
                    description
                      "If devSecEventType is communications
                      alarm";
                }
                leaf quality-of-service-alarm {
                    type boolean;
                    description
                      "If devSecEventType is quality of service
                      alarm";
                }
                leaf process-err-alarm {
                    type boolean;
                    description
                      "If devSecEventType is processing error
                      alarm";
                }
                leaf equipment-err-alarm {
                    type boolean;
                    description
                      "If devSecEventType is equipment error
                      alarm";
                }
                leaf environmental-err-alarm {
                    type boolean;
                    description
                      "If devSecEventType is environmental error
                      alarm";
                }

              }

              container dev-sec-event-type-severity {
                description
                 "This is a mandatory uint 8 enumerated integer,
                  which is used to specify the perceived
                  severity of the event generated by this
                  Device.";

                leaf unknown {
                    type boolean;
                    description



Hares, et al.          Expires September 24, 2018              [Page 29]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                      "If devSecEventType is unknown";
                }
                leaf cleared {
                    type boolean;
                    description
                      "If devSecEventTypeSeverity is cleared";
                }
                leaf indeterminate {
                    type boolean;
                    description
                      "If devSecEventTypeSeverity is
                      indeterminate";
                }
                leaf critical {
                    type boolean;
                    description
                      "If devSecEventTypeSeverity is critical";
                }
                leaf major{
                    type boolean;
                    description
                      "If devSecEventTypeSeverity is major";
                }
                leaf minor {
                    type boolean;
                    description
                      "If devSecEventTypeSeverity is minor";
                }
                leaf warning {
                    type boolean;
                    description
                      "If devSecEventTypeSeverity is warning";
                }
              }
            }
            case sys-event {
              leaf sys-manual {
                type string;
                description
                  "This is manual for system event.
                  Vendors can write instructions for system event
                  that vendor made";
              }

              leaf sys-sec-event-content {
                type boolean;
                description
                 "This is a mandatory string that contains a content



Hares, et al.          Expires September 24, 2018              [Page 30]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                  of the SystemSecurityEvent. The format of a content
                  is specified in a sysSecEventFormat class attribute,
                  and the type of event is defined in the
                  sysSecEventType class attribute. An example of the
                  sysSecEventContent attribute is string sysadmin3,
                  with the sysSecEventFormat attribute set to 1(GUID),
                  and the sysSecEventType attribute set to 2
                  (audit log cleared).";
              }

              container sys-sec-event-format {
                description
                 "This is a mandatory uint 8 enumerated integer, which
                  is used to specify the data type of the
                  sysSecEventContent attribute.";

                leaf unknown {
                  type boolean;
                  description
                    "If SecEventFormat is unknown";
                }
                leaf guid {
                  type boolean;
                  description
                    "If SecEventFormat is GUID
                    (Generic Unique IDentifier)";
                }
                leaf uuid {
                  type boolean;
                  description
                    "If SecEventFormat is UUID
                    (Universal Unique IDentifier)";
                }
                leaf uri {
                  type boolean;
                  description
                    "If SecEventFormat is URI
                    (Uniform Resource Identifier)";
                }
                leaf fqdn {
                  type boolean;
                  description
                    "If SecEventFormat is FQDN
                    (Fully Qualified Domain Name)";
                }
                leaf fqpn {
                  type boolean;
                  description



Hares, et al.          Expires September 24, 2018              [Page 31]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                    "If SecEventFormat is FQPN
                    (Fully Qualified Path Name)";
                }
              }

              container sys-sec-event-type {
                description
                 "This is a mandatory uint 8 enumerated integer, which
                  is used to specify the type of event that involves
                  this device.";

                leaf unknown {
                    type boolean;
                    description
                      "If sysSecEventType is unknown";
                }
                leaf audit-log-written-to {
                    type boolean;
                    description
                    "If sysSecEventTypeSeverity
                     is that audit log is written to";
                }
                leaf audit-log-cleared {
                    type boolean;
                    description
                    "If sysSecEventTypeSeverity
                     is that audit log is cleared";
                }
                leaf policy-created {
                    type boolean;
                    description
                    "If sysSecEventTypeSeverity
                     is that policy is created";
                }
                leaf policy-edited{
                    type boolean;
                    description
                    "If sysSecEventTypeSeverity
                     is that policy is edited";
                }
                leaf policy-deleted{
                    type boolean;
                    description
                    "If sysSecEventTypeSeverity
                     is that policy is deleted";
                }
                leaf policy-executed{
                    type boolean;



Hares, et al.          Expires September 24, 2018              [Page 32]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                    description
                    "If sysSecEventTypeSeverity
                     is that policy is executed";
                }
              }
            }
            case time-event {
              leaf time-manual {
                type string;
                description
                  "This is manual for time event.
                  Vendors can write instructions for time event
                  that vendor made";
              }
              leaf time-sec-event-begin {
                type boolean;
                description
                  "This is a mandatory DateTime attribute, and
                  represents the beginning of a time period.
                  It has a value that has a date and/or a time
                  component (as in the Java or Python libraries).";
              }

              leaf time-sec-event-end {
                type boolean;
                description
                  "This is a mandatory DateTime attribute, and
                   represents the end of a time period. It has
                   a value that has a date and/or a time component
                   (as in the Java or Python libraries). If this is
                   a single event occurrence, and not a time period
                   when the event can occur, then the
                   timeSecEventPeriodEnd attribute may be ignored.";
              }

              leaf time-sec-event-time-zone {
                type boolean;
                description
                  "This is a mandatory string attribute, and defines a
                   time zone that this event occurred in using the
                   format specified in ISO8601.";
              }
            }
          }
        }

        container condition {
          description



Hares, et al.          Expires September 24, 2018              [Page 33]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


            " This is abstract.  A condition is defined as a set
            of attributes, features, and/or values that are to be
            compared with a set of known attributes, features,
            and/or values in order to determine whether or not the
            set of Actions in that (imperative) I2NSF Policy Rule
            can be executed or not. Examples of I2NSF Conditions
            include matching attributes of a packet or flow, and
            comparing the internal state of an NSF to a desired state.";

          choice condition-type {
            description
              "Vendors can use YANG data model to configure rules
              by concreting this condition type";

            case packet-security-condition {
              leaf packet-manual {
                type string;
                description
                  "This is manual for packet condition.
                  Vendors can write instructions for packet condition
                  that vendor made";
              }

              container packet-security-mac-condition {
                description
                  "The purpose of this Class is to represent packet MAC
                   packet header information that can be used as part of
                   a test to determine if the set of Policy Actions in
                   this ECA Policy Rule should be execute or not.";

                leaf pkt-sec-cond-mac-dest {
                  type boolean;
                  description
                    "The MAC destination address (6 octets long).";
                }

                leaf pkt-sec-cond-mac-src {
                  type boolean;
                  description
                    "The MAC source address (6 octets long).";
                }

                leaf pkt-sec-cond-mac-8021q {
                  type boolean;
                  description
                    "This is an optional string attribute, and defines
                     The 802.1Q tab value (2 octets long).";
                }



Hares, et al.          Expires September 24, 2018              [Page 34]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                leaf pkt-sec-cond-mac-ether-type {
                  type boolean;
                  description
                    "The EtherType field (2 octets long). Values up to
                     and including 1500 indicate the size of the payload
                     in octets; values of 1536 and above define which
                     protocol is encapsulated in the payload of the
                     frame.";
                }

                leaf pkt-sec-cond-mac-tci {
                  type string;
                  description
                    "This is an optional string attribute, and defines
                     the Tag Control Information. This consists of a 3
                     bit user priority field, a drop eligible indicator
                     (1 bit), and a VLAN identifier (12 bits).";
                }
              }

              container packet-security-ipv4-condition {
                description
                  "The purpose of this Class is to represent packet IPv4
                   packet header information that can be used as part of
                   a test to determine if the set of Policy Actions in
                   this ECA Policy Rule should be executed or not.";

                leaf pkt-sec-cond-ipv4-header-length {
                  type boolean;
                  description
                    "The IPv4 packet header consists of 14 fields,
                     of which 13 are required.";
                }

                leaf pkt-sec-cond-ipv4-tos {
                  type boolean;
                  description
                    "The ToS field could specify a datagram's priority
                     and request a route for low-delay, high-throughput,
                     or highly-reliable service..";
                }

                leaf pkt-sec-cond-ipv4-total-length {
                  type boolean;
                  description
                    "This 16-bit field defines the entire packet size,
                     including header and data, in bytes.";
                }



Hares, et al.          Expires September 24, 2018              [Page 35]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                leaf pkt-sec-cond-ipv4-id {
                  type boolean;
                  description
                    "This field is an identification field and is
                     primarily used for uniquely identifying
                     the group of fragments of a single IP datagram.";
                }

                leaf pkt-sec-cond-ipv4-fragment {
                  type boolean;
                  description
                    "IP fragmentation is an Internet Protocol (IP)
                     process that breaks datagrams into smaller pieces
                     (fragments), so that packets may be formed that
                     can pass through a link with a smaller maximum
                     transmission unit (MTU) than the original
                     datagram size.";
                }

                leaf pkt-sec-cond-ipv4-fragment-offset {
                  type boolean;
                  description
                    "Fragment offset field along with Don't Fragment
                     and More Fragment flags in the IP protocol
                     header are used for fragmentation and reassembly
                     of IP datagrams.";
                }

                leaf pkt-sec-cond-ipv4-ttl {
                  type boolean;
                  description
                    "The ttl keyword is used to check for a specific
                     IP time-to-live value in the header of
                     a packet.";
                }

                leaf pkt-sec-cond-ipv4-protocol {
                  type boolean;
                  description
                    "Internet Protocol version 4(IPv4) is the fourth
                     version of the Internet Protocol (IP).";
                }

                leaf pkt-sec-cond-ipv4-src {
                  type boolean;
                  description
                    "Defines the IPv4 Source Address.";
                }



Hares, et al.          Expires September 24, 2018              [Page 36]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                leaf pkt-sec-cond-ipv4-dest {
                  type boolean;
                  description
                    "Defines the IPv4 Destination Address.";
                }

                leaf pkt-sec-cond-ipv4-ipopts {
                  type boolean;
                  description
                    "With the ipopts keyword you can check if
                     a specific ip option is set. Ipopts has
                     to be used at the beginning of a rule.";
                }

                leaf pkt-sec-cond-ipv4-sameip {
                  type boolean;
                  description
                    "Every packet has a source IP-address and
                     a destination IP-address. It can be that
                     the source IP is the same as
                     the destination IP.";
                }

                leaf pkt-sec-cond-ipv4-geoip {
                  type boolean;
                  description
                    "The geoip keyword enables you to match on
                     the source, destination or source and destination
                     IP addresses of network traffic and to see to
                     which country it belongs. To do this, Suricata
                     uses GeoIP API with MaxMind database format.";
                }
              }

              container packet-security-ipv6-condition {
                description
                   "The purpose of this Class is to represent packet
                   IPv6 packet header information that can be used as
                   part of a test to determine if the set of Policy
                   Actions in this ECA Policy Rule should be executed
                   or not.";

                leaf pkt-sec-cond-ipv6-dscp {
                  type boolean;
                  description
                    "Differentiated Services Code Point (DSCP)
                     of ipv6.";
                }



Hares, et al.          Expires September 24, 2018              [Page 37]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                leaf pkt-sec-cond-ipv6-ecn {
                  type boolean;
                  description
                    "ECN allows end-to-end notification of network
                     congestion without dropping packets.";
                }

                leaf pkt-sec-cond-ipv6-traffic-class {
                  type boolean;
                  description
                    "The bits of this field hold two values. The 6
                     most-significant bits are used for
                     differentiated services, which is used to
                     classify packets.";
                }

                leaf pkt-sec-cond-ipv6-flow-label {
                  type boolean;
                  description
                    "The flow label when set to a non-zero value
                     serves as a hint to routers and switches
                     with multiple outbound paths that these
                     packets should stay on the same path so that
                     they will not be reordered.";
                }

                leaf pkt-sec-cond-ipv6-payload-length {
                  type boolean;
                  description
                    "The size of the payload in octets,
                     including any extension headers.";
                }

                leaf pkt-sec-cond-ipv6-next-header {
                  type boolean;
                  description
                    "Specifies the type of the next header.
                     This field usually specifies the transport
                     layer protocol used by a packet's payload.";
                }

                leaf pkt-sec-cond-ipv6-hop-limit {
                  type boolean;
                  description
                    "Replaces the time to live field of IPv4.";
                }

                leaf pkt-sec-cond-ipv6-src {



Hares, et al.          Expires September 24, 2018              [Page 38]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                  type boolean;
                  description
                    "The IPv6 address of the sending node.";
                }

                leaf pkt-sec-cond-ipv6-dest {
                  type boolean;
                  description
                    "The IPv6 address of the destination node(s).";
                }
              }

              container packet-security-tcp-condition {
                description
                  "The purpose of this Class is to represent packet
                   TCP packet header information that can be used as
                   part of a test to determine if the set of Policy
                   Actions in this ECA Policy Rule should be executed
                   or not.";

                leaf pkt-sec-cond-tcp-src-port {
                  type boolean;
                  description
                    "This is a mandatory string attribute, and
                    defines the Source Port number (16 bits).";
                }

                leaf pkt-sec-cond-tcp-dest-port {
                  type boolean;
                  description
                    "This is a mandatory string attribute, and
                    defines the Destination Port number (16 bits).";
                }

                leaf pkt-sec-cond-tcp-seq-num {
                  type boolean;
                  description
                    "If the SYN flag is set (1), then this is the
                     initial sequence number.";
                }

                leaf pkt-sec-cond-tcp-ack-num {
                  type boolean;
                  description
                    "If the ACK flag is set then the value of this
                     field is the next sequence number that the sender
                     is expecting.";
                }



Hares, et al.          Expires September 24, 2018              [Page 39]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                leaf pkt-sec-cond-tcp-window-size {
                  type boolean;
                  description
                    "The size of the receive window, which specifies
                     the number of windows size units (by default,bytes)
                     (beyond the segment identified by the sequence
                     number in the acknowledgment field) that the sender
                     of this segment is currently willing to recive.";
                }

                leaf pkt-sec-cond-tcp-flags {
                  type boolean;
                  description
                    "This is a mandatory string attribute, and defines
                     the nine Control bit flags (9 bits).";
                }
              }

              container packet-security-udp-condition {
                description
                  "The purpose of this Class is to represent packet UDP
                   packet header information that can be used as part
                   of a test to determine if the set of Policy Actions
                   in this ECA Policy Rule should be executed or not.";

                leaf-list pkt-sec-cond-udp-src-port {
                  type boolean;
                  description
                    "This is a mandatory string attribute, and
                    defines the UDP Source Port number (16 bits).";
                }

                leaf-list pkt-sec-cond-udp-dest-port {
                  type boolean;
                  description
                    "This is a mandatory string attribute, and
                    defines the UDP Destination Port number (16 bits).";
                }

                leaf pkt-sec-cond-udp-length {
                  type boolean;
                  description
                    "This is a mandatory string attribute, and defines
                     the length in bytes of the UDP header and data
                     (16 bits).";
                }
              }




Hares, et al.          Expires September 24, 2018              [Page 40]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


              container packet-security-icmp-condition {
                description
                  "The internet control message protocol condition.";

                leaf pkt-sec-cond-icmp-type {
                  type boolean;
                  description
                    "ICMP type, see Control messages.";
                }

                leaf pkt-sec-cond-icmp-code {
                  type boolean;
                  description
                    "ICMP subtype, see Control messages.";
                }

                leaf pkt-sec-cond-icmp-seg-num {
                  type boolean;
                  description
                    "The icmp Sequence Number.";
                }
              }
            }

            case packet-payload-condition {
              leaf packet-payload-manual {
                type string;
                description
                  "This is manual for payload condition.
                  Vendors can write instructions for payload condition
                  that vendor made";
              }
              leaf pkt-payload-content {
                type boolean;
                description
                  "The content keyword is very important in
                   signatures. Between the quotation marks you
                   can write on what you would like the
                   signature to match.";
              }
            }
            case target-condition {
              leaf target-manual {
                type string;
                description
                  "This is manual for target condition.
                  Vendors can write instructions for target condition
                  that vendor made";



Hares, et al.          Expires September 24, 2018              [Page 41]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


              }

              leaf device-sec-context-cond {
                type boolean;
                description
                  "The device attribute that can identify a device,
                   including the device type (i.e., router, switch,
                   pc, ios, or android) and the device's owner as
                   well.";
              }
            }
            case users-condition {
              leaf users-manual {
                type string;
                description
                  "This is manual for user condition.
                  Vendors can write instructions for user condition
                  that vendor made";
              }

              container user{
                description
                  "The user (or user group) information with which
                   network flow is associated: The user has many
                   attributes such as name, id, password, type,
                   authentication mode and so on. Name/id is often
                   used in the security policy to identify the user.
                   Besides, NSF is aware of the IP address of the
                   user provided by a unified user management system
                   via network. Based on name-address association,
                   NSF is able to enforce the security functions
                   over the given user (or user group)";

                choice user-name {
                  description
                    "The name of the user.
                     This must be unique.";

                  case tenant {
                    description
                      "Tenant information.";

                    leaf tenant {
                      type boolean;
                      description
                        "User's tenant information.";
                    }
                  }



Hares, et al.          Expires September 24, 2018              [Page 42]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                  case vn-id {
                    description
                      "VN-ID information.";

                    leaf vn-id {
                      type boolean;
                      description
                        "User's VN-ID information.";
                    }
                  }
                }
              }
              container group {
                description
                  "The user (or user group) information with which
                   network flow is associated: The user has many
                   attributes such as name, id, password, type,
                   authentication mode and so on. Name/id is often
                   used in the security policy to identify the user.
                   Besides, NSF is aware of the IP address of the
                   user provided by a unified user management system
                   via network. Based on name-address association,
                   NSF is able to enforce the security functions
                   over the given user (or user group)";

                choice group-name {
                  description
                    "The name of the user.
                     This must be unique.";

                  case tenant {
                    description
                      "Tenant information.";

                    leaf tenant {
                      type boolean;
                      description
                        "User's tenant information.";
                    }
                  }

                  case vn-id {
                    description
                      "VN-ID information.";

                    leaf vn-id {
                      type boolean;
                      description



Hares, et al.          Expires September 24, 2018              [Page 43]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                        "User's VN-ID information.";
                    }
                  }
                }
              }

            }
            case context-condition {
              leaf context-manual {
                type string;
                description
                  "This is manual for context condition.
                  Vendors can write instructions for context condition
                  that vendor made";
              }
            }
            case gen-context-condition {
              leaf gen-context-manual {
                type string;
                description
                  "This is manual for generic context condition.
                  Vendors can write instructions for generic context
                  condition that vendor made";
              }

              container geographic-location {
                description
                  "The location where network traffic is associated
                   with. The region can be the geographic location
                   such as country, province, and city,
                   as well as the logical network location such as
                   IP address, network section, and network domain.";

                leaf src-geographic-location {
                  type boolean;
                  description
                    "This is mapped to ip address. We can acquire
                     source region through ip address stored the
                     database.";
                }
                leaf dest-geographic-location {
                  type boolean;
                  description
                    "This is mapped to ip address. We can acquire
                     destination region through ip address stored
                     the database.";
                }
              }



Hares, et al.          Expires September 24, 2018              [Page 44]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


            }
          }
        }
        container action {
          description
            "An action is used to control and monitor aspects of
             flow-based NSFs when the event and condition clauses
             are satisfied. NSFs provide security functions by
             executing various Actions. Examples of I2NSF Actions
             include providing intrusion detection and/or protection,
             web and flow filtering, and deep packet inspection
             for packets and flows.";


          choice action-type {
            description
              "Vendors can use YANG data model to configure rules
              by concreting this action type";
            case ingress-action {
              leaf ingress-manual {
                type string;
                description
                  "This is manual for ingress action.
                  Vendors can write instructions for ingress action
                  that vendor made";
              }
              container ingress-action-type {
                description
                  "Ingress action type: permit, deny, and mirror.";
                leaf pass {
                  type boolean;
                  description
                    "If ingress action is pass";
                }
                leaf drop {
                  type boolean;
                  description
                    "If ingress action is drop";
                }
                leaf reject {
                  type boolean;
                  description
                    "If ingress action is reject";
                }
                leaf alert {
                  type boolean;
                  description
                    "If ingress action is alert";



Hares, et al.          Expires September 24, 2018              [Page 45]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                }
                leaf mirror {
                  type boolean;
                  description
                    "If ingress action is mirror";
                }
              }
            }
            case egress-action {
              leaf egress-manual {
                type string;
                description
                  "This is manual for egress action.
                  Vendors can write instructions for egress action
                  that vendor made";
              }
              container egress-action-type {
                description
                  "Egress-action-type: invoke-signaling,
                   tunnel-encapsulation, and forwarding.";
                leaf invoke-signaling {
                  type boolean;
                  description
                    "If egress action is invoke signaling";
                }
                leaf tunnel-encapsulation {
                  type boolean;
                  description
                    "If egress action is tunnel encapsulation";
                }
                leaf forwarding {
                  type boolean;
                  description
                    "If egress action is forwarding";
                }
                leaf redirection {
                  type boolean;
                  description
                    "If egress action is redirection";
                }
              }
            }
          }
        }
        container resolution-strategy {
          description
            "The resolution strategies can be used to
            specify how to resolve conflicts that occur between



Hares, et al.          Expires September 24, 2018              [Page 46]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


            the actions of the same or different policy rules that
            are matched and contained in this particular NSF";

          leaf first-matching-rule {
            type boolean;
            description
              "If the resolution strategy is first matching rule";
          }

          leaf last-matching-rule {
            type boolean;
            description
              "If the resolution strategy is last matching rule";
          }
        }
        container default-action {
          description
            "This default action can be used to specify a predefined
            action when no other alternative action was matched
            by the currently executing I2NSF Policy Rule. An analogy
            is the use of a default statement in a C switch statement.";

          container default-action-type {
            description
              "Ingress action type: permit, deny, and mirror.";

            container ingress-action-type {
              description
                "Ingress action type: permit, deny, and mirror.";
              leaf pass {
                type boolean;
                description
                  "If ingress action is pass";
              }
              leaf drop {
                type boolean;
                description
                  "If ingress action is drop";
              }
              leaf reject {
                type boolean;
                description
                  "If ingress action is reject";
              }
              leaf alert {
                type boolean;
                description
                  "If ingress action is alert";



Hares, et al.          Expires September 24, 2018              [Page 47]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


              }
              leaf mirror {
                type boolean;
                description
                  "If ingress action is mirror";
              }
            }
          }
        }
      }
    }

    grouping i2nsf-con-sec-control-caps {
      description
        "i2nsf-con-sec-control-caps";

      container con-sec-control-capabilities {
        description
          "content-security-control-capabilities";


        leaf anti-virus {
          type boolean;
          description
            "antivirus";
        }
        leaf ips {
          type boolean;
          description
            "ips";
        }

        leaf ids {
          type boolean;
          description
            "ids";
        }

        leaf url-filter {
          type boolean;
          description
            "url-filter";
        }
        leaf data-filter {
          type boolean;
          description
            "data-filter";
        }



Hares, et al.          Expires September 24, 2018              [Page 48]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


        leaf mail-filter {
          type boolean;
          description
            "mail-filter";
        }
        leaf sql-filter {
          type boolean;
          description
            "sql-filter";
        }
        leaf file-blocking {
          type boolean;
          description
            "file-blocking";
        }
        leaf file-isolate {
          type boolean;
          description
            "file-isolate";
        }
        leaf pkt-capture {
          type boolean;
          description
            "pkt-capture";
        }
        leaf application-behavior {
          type boolean;
          description
            "application-behavior";
        }
        leaf voip-volte {
          type boolean;
          description
            "voip-volte";
        }
      }


    }

    grouping i2nsf-attack-mitigation-control-caps {
      description
        "i2nsf-attack-mitigation-control-caps";

      container attack-mitigation-capabilities {
        description
          "attack-mitigation-capabilities";
        choice attack-mitigation-control-type {



Hares, et al.          Expires September 24, 2018              [Page 49]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


          description
            "attack-mitigation-control-type";
          case ddos-attack {
            description
              "ddos-attack";
            choice ddos-attack-type {
              description
                "ddos-attack-type";
              case network-layer-ddos-attack {
                description
                  "network-layer-ddos-attack";
                container network-layer-ddos-attack-types {
                  description
                    "network-layer-ddos-attack-type";
                  leaf syn-flood-attack {
                    type boolean;
                    description
                      "syn-flood-attack";
                  }
                  leaf udp-flood-attack {
                    type boolean;
                    description
                      "udp-flood-attack";
                  }
                  leaf icmp-flood-attack {
                    type boolean;
                    description
                      "icmp-flood-attack";
                  }
                  leaf ip-fragment-flood-attack {
                    type boolean;
                    description
                      "ip-fragment-flood-attack";
                  }
                  leaf ipv6-related-attack {
                    type boolean;
                    description
                      "ip-fragment-flood-attack";
                  }
                }
              }
              case app-layer-ddos-attack {
                description
                  "app-layer-ddos-attack";
                container app-layer-ddos-attack-types {
                  description
                    "app-layer-ddos-attack-types";
                  leaf http-flood-attack {



Hares, et al.          Expires September 24, 2018              [Page 50]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


                    type boolean;
                    description
                      "http-flood-attack";
                  }
                  leaf https-flood-attack {
                    type boolean;
                    description
                      "https-flood-attack";
                  }
                  leaf dns-flood-attack {
                    type boolean;
                    description
                      "dns-flood-attack";
                  }
                  leaf dns-amp-flood-attack {
                    type boolean;
                    description
                      "dns-amp-flood-attack";
                  }
                  leaf ssl-flood-attack {
                    type boolean;
                    description
                      "ssl-flood-attack";
                  }
                }
              }
            }
          }

          case single-packet-attack {
            description
              "single-packet-attack";
            choice single-packet-attack-type {
              description
                "single-packet-attack-type";
              case scan-and-sniff-attack {
                description
                  "scan-and-sniff-attack";
                leaf ip-sweep-attack {
                  type boolean;
                  description
                    "ip-sweep-attack";
                }
                leaf port-scanning-attack {
                  type boolean;
                  description
                    "port-scanning-attack";
                }



Hares, et al.          Expires September 24, 2018              [Page 51]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


              }
              case malformed-packet-attack {
                description
                  "malformed-packet-attack";
                leaf ping-of-death-attack {
                  type boolean;
                  description
                    "ping-of-death-attack";
                }
                leaf teardrop-attack {
                  type boolean;
                  description
                    "teardrop-attack";
                }
              }
              case special-packet-attack {
                description
                  "special-packet-attack";
                leaf oversized-icmp-attack {
                  type boolean;
                  description
                    "oversized-icmp-attack";
                }
                leaf tracert-attack {
                  type boolean;
                  description
                    "tracert-attack";
                }
              }
            }
          }
        }
      }
    }


    list nsf {
      key "nsf-name";
      description
        "nsf-name";
      leaf nsf-name {
        type string;
        mandatory true;
        description
          "nsf-name";
      }
      uses capabilities-information;




Hares, et al.          Expires September 24, 2018              [Page 52]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


      container generic-nsf-capabilities {
        description
          "generic-nsf-capabilities";
        uses i2nsf-net-sec-caps;
      }
    }


    rpc call-appropriate-nsf {
      description
        "We can acquire appropriate NSF that we want
        If we give type of NSF that we want to use,
        we acquire the location information of NSF";

      input {
          leaf nsf-type {
              type nsf-type;
              mandatory true;
              description
                "This is used to acquire NSF
                This is mandatory";
          }
          uses i2nsf-it-resources;
      }
      output {
          uses i2nsf-nsf-location;
      }
   }
  }







  <CODE ENDS>

              Figure 10: YANG Data Module of I2NSF Capability

8.  IANA Considerations

   No IANA considerations exist for this document at this time.  URL
   will be added.







Hares, et al.          Expires September 24, 2018              [Page 53]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


9.  Security Considerations

   This document introduces no additional security threats and SHOULD
   follow the security requirements as stated in [RFC8329].

10.  Acknowledgments

   This work was supported by Institute for Information & communications
   Technology Promotion (IITP) grant funded by the Korea government
   (MSIP) (No.R-20160222-002755, Cloud based Security Intelligence
   Technology Development for the Customized Security Service
   Provisioning).

11.  Contributors

   I2NSF is a group effort.  I2NSF has had a number of contributing
   authors.  The following are considered co-authors:

   o  Hyoungshick Kim (Sungkyunkwan University)

   o  Daeyoung Hyun (Sungkyunkwan University)

   o  Dongjin Hong (Sungkyunkwan University)

   o  Liang Xia (Huawei)

   o  Jung-Soo Park (ETRI)

   o  Tae-Jin Ahn (Korea Telecom)

   o  Se-Hui Lee (Korea Telecom)

12.  References

12.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC6020]  Bjorklund, M., "YANG - A Data Modeling Language for the
              Network Configuration Protocol (NETCONF)", RFC 6020,
              October 2010.

   [RFC8192]  Hares, S., Lopez, D., Zarny, M., Jacquenet, C., Kumar, R.,
              and J. Jeong, "Interface to Network Security Functions
              (I2NSF): Problem Statement and Use Cases", RFC 8192, July
              2017.




Hares, et al.          Expires September 24, 2018              [Page 54]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


   [RFC8329]  Lopez, D., Lopez, E., Dunbar, L., Strassner, J., and R.
              Kumar, "Framework for Interface to Network Security
              Functions", RFC 8329, February 2018.

12.2.  Informative References

   [i2nsf-nsf-cap-im]
              Xia, L., Strassner, J., Basile, C., and D. Lopez,
              "Information Model of NSFs Capabilities", draft-ietf-
              i2nsf-capability-00 (work in progress), September 2017.

   [i2nsf-nsf-yang]
              Kim, J., Jeong, J., Park, J., Hares, S., and Q. Lin,
              "I2NSF Network Security Function-Facing Interface YANG
              Data Model", draft-kim-i2nsf-nsf-facing-interface-data-
              model-05 (work in progress), March 2018.

   [i2nsf-sfc]
              Hyun, S., Jeong, J., Park, J., and S. Hares, "Service
              Function Chaining-Enabled I2NSF Architecture", draft-hyun-
              i2nsf-nsf-triggered-steering-05 (work in progress), March
              2018.

   [i2nsf-terminology]
              Hares, S., Strassner, J., Lopez, D., Xia, L., and H.
              Birkholz, "Interface to Network Security Functions (I2NSF)
              Terminology", draft-ietf-i2nsf-terminology-05 (work in
              progress), January 2018.

   [i2rs-rib-data-model]
              Wang, L., Chen, M., Dass, A., Ananthakrishnan, H., Kini,
              S., and N. Bahadur, "A YANG Data Model for Routing
              Information Base (RIB)", draft-ietf-i2rs-rib-data-model-10
              (work in progress), February 2018.

   [supa-policy-info-model]
              Strassner, J., Halpern, J., and S. Meer, "Generic Policy
              Information Model for Simplified Use of Policy
              Abstractions (SUPA)", draft-ietf-supa-generic-policy-info-
              model-03 (work in progress), May 2017.











Hares, et al.          Expires September 24, 2018              [Page 55]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


Appendix A.  Example: Extended VoIP-VoLTE Security Function Capabilities
             Module

   This section gives a simple example of how VoIP-VoLTE Security
   Function Capabilities module could be extended.

     module
     ex-voip-volte-capa {
       namespace "http://example.com/voip-volte-capa";
       prefix "voip-volte-capa";

       import ietf-i2nsf-capability {
         prefix capa;
       }


       augment "/capa:nsf/capa:generic-nsf-capabilities/"
               + "capa:net-sec-control-capabilities/"
               + "capa:condition/capa:condition-type" {
         case voice-condition {
           leaf sip-header-method {
             type boolean;
             description
               "SIP header method.";
           }

           leaf sip-header-uri {
             type boolean;
             description
               "SIP header URI.";
           }

           leaf sip-header-from {
             type boolean;
             description
               "SIP header From.";
           }

           leaf sip-header-to {
             type boolean;
             description
               "SIP header To.";
           }

           leaf sip-header-expire-time {
             type boolean;
             description
               "SIP header expire time.";



Hares, et al.          Expires September 24, 2018              [Page 56]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


           }

           leaf sip-header-user-agent {
             type boolean;
             description
               "SIP header user agent.";
           }
         }
       }
     }


         Figure 11: Example: Extended VoIP-VoLTE Security Function
                            Capabilities Module

Appendix B.  Example: Configuration XML of Capability Module

   This section gives a xml examples for a configuration of Capability
   module according to a requirement.

B.1.  Example: Configuration XML of Generic Network Security Function
      Capabilities

   This section gives a xml example for generic network security
   function capability configuration according to a requirement.

   Requirement: Register packet filter according to requirements.

   1.  The location of the NSF is 221.159.112.150.

   2.  The NSF can obtain the best effect if the packet was generated by
       PC or IoT.

   3.  The NSF can apply policies according to time.

   4.  The NSF should be able to block the source packets or destination
       packets with IPv4 address.

   5.  The NSF should be able to pass, reject, or alert packets.

   6.  Here is XML example for the generic network security function
       capability configuration:









Hares, et al.          Expires September 24, 2018              [Page 57]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


  <?xml version="1.0" encoding="UTF-8"?>
  <rpc message-id="1" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <edit-config>
   <target>
    <running />
   </target>
   <config>
    <nsf xmlns="urn:ietf:params:xml:ns:yang:" +
                        "ietf-i2nsf-capability">
      <nsf-name>Huawei-Firewall</nsf-name>
      <nsf-address>
       <ipv4-address>221.159.112.150</ipv4-address>
      </nsf-address>
      <target-device>
       <pc>true</pc>
      </target-device>
      <target-device>
       <iot>true</iot>
      </target-device>
      <generic-nsf-capabilities>
       <net-sec-control-capabilities>
        <nsc-capabilities-name>ipv4-packet-filter<nsc-capabilities-name>
        <time-zone>
         <start-time>true</start-time>
         <end-time>true</end-time>
        </time-zone>
        <condition>
          <packet-security-ipv4-condition>
           <pkt-sec-cond-ipv4-src>true</pkt-sec-cond-ipv4-src>
           <pkt-sec-cond-ipv4-dest>true</pkt-sec-cond-ipv4-dest>
          </packet-security-ipv4-condition>
        </condition>
        <action>
         <ingress-action-type>
          <pass>true</pass>
          <reject>true</reject>
          <alert>true</alert>
         </ingress-action-type>
        </action>
      </net-sec-control-capabilities>
     </generic-nsf-capabilities>
    </nsf>
   </config>
  </edit-config>
  </rpc>

    Figure 12: Example: Configuration XML for Generic Network Security
                            Function Capability



Hares, et al.          Expires September 24, 2018              [Page 58]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


B.2.  Example: Configuration XML of Extended VoIP/VoLTE Security
      Function Capabilities Module

   This section gives a xml example for extended VoIP-VoLTE security
   function capabilities (See Figure 11) configuration according to a
   requirement.

   Requirement: Register VoIP/VoLTe security function according to
   requirements.

   1.  The location of the NSF is 221.159.112.151.

   2.  The NSF can obtain the best effect if the packet was generated by
       VoIP-VoLTE phone.

   3.  The NSF should be able to block the malicious sip packets with
       user agent.

   4.  The NSF should be able to pass, reject, or alert packets.

   Here is XML example for the VoIP-VoLTE security function capabilities
   configuration:





























Hares, et al.          Expires September 24, 2018              [Page 59]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


    <?xml version="1.0" encoding="UTF-8"?>
    <rpc message-id="1" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
    <edit-config>
     <target>
      <running />
     </target>
     <config>
      <nsf xmlns="urn:ietf:params:xml:ns:yang:" +
                 "ietf-i2nsf-capability">
      <nsf-name>Cisco-VoIP-VoLTE</nsf-name>
      <nsf-address>
        <ipv4-address>221.159.112.151</ipv4-address>
      </nsf-address>
      <generic-nsf-capabilities>
       <net-sec-control-capabilities>
        <nsc-capabilities-name>sip-packet-filter<nsc-capabilities-name>
         <condition>
           <sip-header-user-agent>true</sip-header-user-agent>
         </condition>
         <action>
          <ingress-action-type>
            <pass>true</pass>
            <reject>true</reject>
            <alert>true</alert>
          </ingress-action-type>
         </action>
       </net-sec-control-capabilities>
      </generic-nsf-capabilities>
      </nsf>
     </config>
    </edit-config>
    </rpc>

       Figure 13: Example: Configuration XML for Extended VoIP/VoLTE
                      Security Function Capabilities

Appendix C.  Changes from draft-hares-i2nsf-capability-data-model-06

   The following changes are made from draft-hares-i2nsf-capability-
   data-model-06:

   1.  We added the the capability for time zone and time interval.

Authors' Addresses







Hares, et al.          Expires September 24, 2018              [Page 60]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


   Susan Hares
   Huawei
   7453 Hickory Hill
   Saline, MI  48176
   USA

   Phone: +1-734-604-0332
   EMail: shares@ndzh.com


   Jaehoon Paul Jeong
   Department of Software
   Sungkyunkwan University
   2066 Seobu-Ro, Jangan-Gu
   Suwon, Gyeonggi-Do  16419
   Republic of Korea

   Phone: +82 31 299 4957
   Fax:   +82 31 290 7996
   EMail: pauljeong@skku.edu
   URI:   http://iotlab.skku.edu/people-jaehoon-jeong.php


   Jinyong Tim Kim
   Department of Computer Engineering
   Sungkyunkwan University
   2066 Seobu-Ro, Jangan-Gu
   Suwon, Gyeonggi-Do  16419
   Republic of Korea

   Phone: +82 10 8273 0930
   EMail: timkim@skku.edu


   Robert Moskowitz
   HTT Consulting
   Oak Park, MI
   USA

   Phone: +1-248-968-9809
   EMail: rgm@htt-consult.com










Hares, et al.          Expires September 24, 2018              [Page 61]


Internet-Draft      I2NSF Capability YANG Data Model          March 2018


   Qiushi Lin
   Huawei
   Huawei Industrial Base
   Shenzhen, Guangdong 518129
   China

   EMail: linqiushi@huawei.com












































Hares, et al.          Expires September 24, 2018              [Page 62]