Internet-Draft CBOR Extended Diagnostic Notation (EDN) September 2024
Bormann Expires 5 March 2025 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-ietf-cbor-edn-literals-12
Published:
Intended Status:
Informational
Expires:
Author:
C. Bormann
Universität Bremen TZI

CBOR Extended Diagnostic Notation (EDN)

Abstract

The Concise Binary Object Representation (CBOR) (STD 94, RFC 8949) is a data format whose design goals include the possibility of extremely small code size, fairly small message size, and extensibility without the need for version negotiation.

In addition to the binary interchange format, CBOR from the outset (RFC 7049) defined a text-based "diagnostic notation" in order to be able to converse about CBOR data items without having to resort to binary data. RFC 8610 extended this into what is known as Extended Diagnostic Notation (EDN).

​This document consolidates the definition of EDN, sets forth a further step of its evolution, and is intended to serve as a single reference target in specifications that use EDN.

It specifies an extension point for adding application-oriented extensions to the diagnostic notation. It then defines two such extensions that enhance EDN with text representations of epoch-based date/times and of IP addresses and prefixes (RFC 9164).

A few further additions close some gaps in usability. The document modifies one extension originally specified in Appendix G.4 of RFC 8610 to enable further increasing usability. To facilitate tool interoperation, this document specifies a formal ABNF grammar, and it adds media types.

The present revision -12 reflects the branch "roll-up" in the repository, an attempt to contain the entire specification of EDN in this document, instead of describing updates to the existing documents RFC 8949 and RFC 8610. While the WG hasn't taken a decision to follow this updated editorial approach, the feedback has been sufficiently positive that the author believes it is not misleading to make this revision available as the current WG Internet-Draft as well.
That said, this is still a snapshot. The editorial work on the branch "roll-up" is not complete. Content will continue to move between sections. The exact reflection of this document being a replacement for both Section 8 of RFC 8949 and Appendix G of RFC 8610 needs to be recorded in the metadata and in abstract and introduction.

About This Document

This note is to be removed before publishing as an RFC.

The latest revision of this draft can be found at https://cbor-wg.github.io/edn-literal/. Status information for this document may be found at https://datatracker.ietf.org/doc/draft-ietf-cbor-edn-literals/.

Discussion of this document takes place on the cbor Working Group mailing list (mailto:cbor@ietf.org), which is archived at https://mailarchive.ietf.org/arch/browse/cbor/. Subscribe at https://www.ietf.org/mailman/listinfo/cbor/.

Source for this draft and an issue tracker can be found at https://github.com/cbor-wg/edn-literal.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 5 March 2025.

Table of Contents

1. Introduction

The Concise Binary Object Representation (CBOR) (STD 94, RFC 8949) is a data format whose design goals include the possibility of extremely small code size, fairly small message size, and extensibility without the need for version negotiation.

In addition to the binary interchange format, CBOR from the outset (Section 6 of [RFC7049], now Section 8 of RFC 8949 [STD94]) defined a text-based "diagnostic notation" in order to be able to converse about CBOR data items without having to resort to binary data. Appendix G of [RFC8610] extended this into what is known as Extended Diagnostic Notation (EDN).

Diagnostic notation syntax is based on JSON, with extensions for representing CBOR constructs such as binary data and tags. (Standardizing this together with the actual interchange format does not serve to create another interchange format, but enables the use of a shared diagnostic notation in tools for and in documents about CBOR.)

This document consolidates the definition of EDN, sets forth a further step of its evolution, and is intended to serve as a single reference target in specifications that use EDN.

It specifies an extension point for adding application-oriented extensions to the diagnostic notation. It then defines two such extensions that enhance EDN with text representations of epoch-based date/times and of IP addresses and prefixes [RFC9164].

A few further additions close some gaps in usability. The document modifies one extension originally specified in Appendix G.4 of [RFC8610] to enable further increasing usability. To facilitate tool interoperation, this document specifies a formal ABNF grammar. (See Section 5.1 for an overall ABNF grammar as well as the ABNF definitions in Section 5.2 for grammars for both the byte string presentations predefined in [STD94] and the application-extensions defined here.)

In addition, this document finally registers a media type identifier and a content-format for CBOR diagnostic notation. This does not elevate its status as an interchange format, but recognizes that interaction between tools is often smoother if media types can be used.

Note that EDN is not meant to be the only text-based representation of CBOR data items. For instance, [YAML] [RFC9512] is able to represent most CBOR data items, possibly requiring use of YAML's extension points. YAML does not provide certain features that can be useful with tools and documents needing text-based representations of CBOR data items (such as embedded CBOR or encoding indicators), but it does provide a host of other features that EDN does not provide such as anchor/alias data sharing, at a cost of higher implementation and learning complexity.

1.1. Structure of This Document

Section 2 of this document has been built from Section 8 of RFC 8949 [STD94] and Appendix G of [RFC8610]. The latter provided a number of useful extensions to the diagnostic notation originally defined in Section 6 of [RFC7049]. Section 8 of RFC 8949 [STD94] and Appendix G of [RFC8610] have collectively been called "Extended Diagnostic Notation" (EDN), giving the present document its name.

After introductory material, Section 3 introduces the concept of application-oriented extension literals and defines the "dt" and "ip" extensions. Section 4 defines mechanisms for dealing with unknown application-oriented literals and deliberately elided information. Section 5 gives the formal syntax of EDN in ABNF, with explanations for some features of and additions to this syntax, as an overall grammar (Section 5.1) and specific grammars for the content of app-string and byte-string literals (Section 5.2). This is followed by the conventional sections for IANA Considerations (6), Security considerations (7), and References (8.1, 8.2). An informational comparison of EDN with CDDL follows in Appendix A.

1.2. Terminology

Section 8 of RFC 8949 [STD94] defines the original CBOR diagnostic notation, and Appendix G of [RFC8610] supplies a number of extensions to the diagnostic notation that result in the Extended Diagnostic Notation (EDN). The diagnostic notation extensions include popular features such as embedded CBOR (encoded CBOR data items in byte strings) and comments. A simple diagnostic notation extension that enables representing CBOR sequences was added in Section 4.2 of [RFC8742]. As diagnostic notation is not used in the kind of interchange situations where backward compatibility would pose a significant obstacle, there is little point in not using these extensions.

Therefore, when we refer to "diagnostic notation", we mean to include the original notation from Section 8 of RFC 8949 [STD94] as well as the extensions from Appendix G of [RFC8610], Section 4.2 of [RFC8742], and the present document. However, we stick to the abbreviation "EDN" as it has become quite popular and is more sharply distinguishable from other meanings than "DN" would be.

In a similar vein, the term "ABNF" in this document refers to the language defined in [STD68] as extended in [RFC7405], where the "characters" of Section 2.3 of RFC 5234 [STD68] are Unicode scalar values.

The term "CDDL" (Concise Data Definition Language) refers to the data definition language defined in [RFC8610] and its registered extensions (such as those in [RFC9165]), as well as [I-D.ietf-cbor-update-8610-grammar]. Additional information about the relationship between the two languages EDN and CDDL is captured in Appendix A.

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

1.3. (Non-)Objectives of this Document

Section 8 of RFC 8949 [STD94] states the objective of defining a common human-readable diagnostic notation with CBOR. In particular, it states:

All actual interchange always happens in the binary format.

One important application of EDN is the notation of CBOR data for humans: in specifications, on whiteboards, and for entering test data. A number of features, such as comments in string literals, are mainly useful for people-to-people communication via EDN. Programs also often output EDN for diagnostic purposes, such as in error messages or to enable comparison (including generation of diffs via tools) with test data.

For comparison with test data, it is often useful if different implementations generate the same (or similar) output for the same CBOR data items. This is comparable to the objectives of deterministic serialization for CBOR data items themselves (Section 4.2 of RFC 8949 [STD94]). However, there are even more representation variants in EDN than in binary CBOR, and there is little point in specifically endorsing a single variant as "deterministic" when other variants may be more useful for human understanding, e.g., the << >> notation as opposed to h''; an EDN generator may have quite a few options that control what presentation variant is most desirable for the application that it is being used for.

Because of this, a deterministic representation is not defined for EDN, and there is no expectation for "roundtripping" from EDN to CBOR and back, i.e., for an ability to convert EDN to binary CBOR and back to EDN while achieving exactly the same result as the original input EDN — the original EDN possibly was created by humans or by a different EDN generator.

However, there is a certain expectation that EDN generators can be configured to some basic output format, which:

  • looks like JSON where that is possible;

  • inserts encoding indicators only where the binary form differs from preferred encoding;

  • uses hexadecimal representation (h'') for byte strings, not b64'' or embedded CBOR (<<>>);

  • does not generate elaborate blank space (newlines, indentation) for pretty-printing, but does use common blank spaces such as after , and :.

Additional features such as ensuring deterministic map ordering (Section 4.2 of RFC 8949 [STD94]) on output, or even deviating from the basic configuration in some systematic way, can further assist in comparing test data. Information obtained from a CDDL model can help in choosing application-oriented literals or specific string representations such as embedded CBOR or b64'' in the appropriate places.

2. Overview over CBOR Extended Diagnostic Notation (EDN)

CBOR is a binary interchange format. To facilitate documentation and debugging, and in particular to facilitate communication between entities cooperating in debugging, this document defines a simple human-readable diagnostic notation. All actual interchange always happens in the binary format.

Note that diagnostic notation truly was designed as a diagnostic format; it originally was not meant to be parsed. Therefore, no formal definition (as in ABNF) was given in the original documents. Recognizing that formal grammars can aid interoperation of tools and usability of documents that employ EDN, Section 5 now provides ABNF definitions.

EDN is a true superset of JSON as it is defined in [STD90] in conjunction with [RFC7493] (that is, any interoperable [RFC7493] JSON text also is an EDN text), extending it both to cover the greater expressiveness of CBOR and to increase its usability.

EDN borrows the JSON syntax for numbers (integer and floating-point, Section 2.3), certain simple values (Section 2.7), UTF-8 text strings, arrays, and maps (maps are called objects in JSON; the diagnostic notation extends JSON here by allowing any data item in the map key position).

As EDN is used for truly diagnostic purposes, its implementations MAY support generation and possibly ingestion of EDN for CBOR data items that are well-formed but not valid. It is RECOMMENDED that an implementation enables such usage only explicitly by an API flag. Validity of CBOR data items is discussed in Section 5.3 of RFC 8949 [STD94], with basic validity discussed in Section 5.3.1 of RFC 8949 [STD94], and tag validity discussed in Section 5.3.2 of RFC 8949 [STD94]. Tag validity is more likely a subject for individual application-oriented extensions, while the two cases of basic validity (for text strings and for maps) are addressed below under the heading of validity.

The rest of this section provides an overview over specific features of EDN, starting with certain common syntactical features and then going through kinds of CBOR data items roughly in the order of CBOR major types. Any additional detailed syntax discussion needed has been deferred to Section 5.1.

2.1. Comments

For presentation to humans, EDN text may benefit from comments. JSON famously does not provide for comments, and the original diagnostic notation in Section 6 of [RFC7049] inherited this property.

EDN now provides two comment syntaxes, which can be used where the syntax allows blank space (outside of constructs such as numbers, string literals, etc.):

  • inline comments, delimited by slashes ("/"):

    In a position that allows blank space, any text within and including a pair of slashes is considered blank space (and thus effectively a comment).

  • end-of-line comments, delimited by "#" and an end of line (LINE FEED, U+000A):

    In a position that allows blank space, any text within and including a pair of a "#" and the end of the line is considered blank space (and thus effectively a comment).

Comments can be used to annotate a CBOR structure as in:

/grasp-message/ [/M_DISCOVERY/ 1, /session-id/ 10584416,
                 /objective/ [/objective-name/ "opsonize",
                              /D, N, S/ 7, /loop-count/ 105]]

or, combining the use of inline and end-of-line comments:

{
 /kty/ 1 : 4, # Symmetric
 /alg/ 3 : 5, # HMAC 256-256
  /k/ -1 : h'6684523ab17337f173500e5728c628547cb37df
             e68449c65f885d1b73b49eae1'
}

2.2. Encoding Indicators

TODO: align this with Section 5.1, Paragraph 7, Item 6

Sometimes it is useful to indicate in the diagnostic notation which of several alternative representations were actually used; for example, a data item written >1.5< by a diagnostic decoder might have been encoded as a half-, single-, or double-precision float.

The convention for encoding indicators is that anything starting with an underscore and all following characters that are alphanumeric or underscore is an encoding indicator, and can be ignored by anyone not interested in this information. For example, _ or _3. Encoding indicators are always optional.

An underscore followed by a decimal digit n indicates that the preceding item (or, for arrays and maps, the item starting with the preceding bracket or brace) was encoded with an additional information value of 24+n. For example, 1.5_1 is a half-precision floating-point number, while 1.5_3 is encoded as double precision. (Note that the encoding indicator "_" is thus an abbreviation of the full form "_7", which is not used.)

Encoding Indicators are discussed further below for indefinite length strings, and for arrays and maps.

2.3. Numbers

In addition to JSON's decimal number literals, EDN provides hexadecimal, octal, and binary number literals in the usual C-language notation (octal with 0o prefix present only).

The following are equivalent:

   4711
   0x1267
   0o11147
   0b1001001100111

As are:

   1.5
   0x1.8p0
   0x18p-4

Numbers composed only of digits (of the respective base) are interpreted as CBOR integers (major type 0/1, or where the number cannot be represented in this way, major type 6 with tag 2/3). A leading "+" sign is a no-op, and a leading "-" sign inverts the sign of the number. So 0, 000, +0 all represent the same integer zero, as does -0; 1, 001, +1 and +0001 all stand for the same integer one, and -1 and -0001 both designate the same integer minus one.

Using a decimal point (.) and/or an exponent (e for decimal, p for hexadecimal) turns the number into a floating point number (major type 7) instead, irrespective of whether it is an integral number mathematically. Note that, in floating point numbers, 0.0 is not the same number as -0.0, even if they are mathematically equal.

The non-finite floating-point numbers Infinity, -Infinity, and NaN are written exactly as in this sentence (this is also a way they can be written in JavaScript, although JSON does not allow them).

See Section 5.1, Paragraph 7, Item 3 for additional details of the EDN number syntax.

(Note that literals for further number formats, e.g., for representing rational numbers as fractions, or for NaNs with non-zero payloads, can be added as application-oriented literals. Background information beyond that in [STD94] about the representation of numbers in CBOR can be found in the informational document [I-D.bormann-cbor-numbers].)

2.4. Strings

CBOR distinguishes two kinds of strings: text strings (the bytes in the string constitute UTF-8 text, major type 3), and byte strings (CBOR does not further characterize the bytes that constitute the string, major type 2).

EDN notates text strings in a form compatible to that of notating text strings in JSON, with a number of usability extensions. In JSON, no control characters are allowed to occur directly in text string literals; if needed, they can be specified using escapes such as \t or \r. In EDN, string literals additionally can contain newlines (LINEFEED U+000A), which are copied into the resulting string like other characters in the string literal. To deal with variability in platform presentation of newlines, any carriage return characters (U+000D) that may be present in the EDN text are not copied into the resulting string (see Section 5.1, Paragraph 7, Item 2). No other control characters can occur in a string literal, and the handling of escaped characters (\r etc.) is as in JSON.

JSON's escape scheme for characters that are not on Unicode's basic multilingual plane (BMP) is cumbersome. EDN keeps it, but also adds the syntax \u{NNN} where NNN is the Unicode scalar value as a hexadecimal number. This means the following are equivalent (the first o is escaped as \u{6f} for no particular reason):

"D\u{6f}mino's \u{1F073} + \u{2318}"   # \u{}-escape 3 chars
"Domino's \uD83C\uDC73 + \u2318"       # escape JSON-like
"Domino's 🁳 + ⌘"                       # unescaped

EDN adds a number of ways to notate byte strings, some of which provide detailed access to the bits within those bytes (see Section 2.4.2). However, quite often, byte strings carry bytes that can be meaningfully notated as UTF-8 text. Analogously to text string literals delimited by double quotes, EDN allows the use of single quotes (without a prefix) to express byte string literals with UTF-8 text; for instance, the following are equivalent:

'hello world'
h'68656c6c6f20776f726c64'

The escaping rules of JSON strings are applied equivalently for text-based byte string literals, e.g., \\ stands for a single backslash and \' stands for a single quote. (See Section 5.1, Paragraph 7, Item 7 for details.)

2.4.1. Encoding Indicators of Strings

The detailed chunk structure of byte and text strings encoded with indefinite length can be notated in the form (_ h'0123', h'4567') and (_ "foo", "bar"). However, for an indefinite-length string with no chunks inside, (_ ) would be ambiguous as to whether a byte string (encoded 0x5fff) or a text string (encoded 0x7fff) is meant and is therefore not used. The basic forms ''_ and ""_ can be used instead and are reserved for the case of no chunks only --- not as short forms for the (permitted, but not really useful) encodings with only empty chunks, which need to be notated as (_ ''), (_ ""), etc., to preserve the chunk structure.

2.4.2. Base-Encoded Byte String Literals

Besides the unprefixed byte string literals that are analogous to JSON text string literals, EDN provides base-encoded byte string literals. These are notated in one of the base encodings [RFC4648], without padding, enclosed in a single-quoted string literal, prefixed by >h< for base16 or >b64< for base64 or base64url (the actual encodings of the latter do not overlap, so the string remains unambiguous). For example, the byte string consisting of the four bytes 12 34 56 78 (given in hexadecimal here) could be written h'12345678' or b64'EjRWeA'.

(Note that Section 8 of RFC 8949 [STD94] also mentions >b32< for base32 and >h32< for base32hex. This has not been implemented widely and therefore is not directly included in this specification. These and further byte string formats now can easily be added back as application-oriented literals.)

Examples often benefit from some blank space (spaces, line breaks) in byte strings. In EDN, blank space is ignored in prefixed byte strings; for instance, the following are equivalent:

   h'48656c6c6f20776f726c64'
   h'48 65 6c 6c 6f 20 77 6f 72 6c 64'
   h'4 86 56c 6c6f
     20776 f726c64'

Note that the internal syntax of prefixed single-quote literals such as h'' and b64'' can allow comments as blank space (see Section 2.1). Since slash characters are allowed in b64'', only inline comments are available in b64 string literals.

   h'68656c6c6f20776f726c64'
   h'68 65 6c /doubled l!/ 6c 6f # hello
     20 /space/
     77 6f 72 6c 64' /world/

2.4.3. Embedded CBOR and CBOR Sequences in Byte Strings

Where a byte string is to carry an embedded CBOR-encoded item, or more generally a sequence of zero or more such items, the diagnostic notation for these zero or more CBOR data items, separated by commas, can be enclosed in << and >> to notate the byte string resulting from encoding the data items and concatenating the result. For instance, each pair of columns in the following are equivalent:

   <<1>>              h'01'
   <<1, 2>>           h'0102'
   <<"hello", null>>  h'65 68656c6c6f f6'
   <<>>               h''

2.4.4. Validity of Text Strings

TODO: Add general text about validity of text strings, also addressing the semantics of concatenation (+). This could move up some text from Section 5.1, Paragraph 7, Item 7 and following.

2.5. Arrays and Maps

EDN borrows the JSON syntax for arrays and maps. (Maps are called objects in JSON.)

For maps, EDN extends the JSON syntax by allowing any data item in the map key position (before the colon).

JSON requires the use of a comma as a separator character between the elements of an array as well as between the members (key/value pairs) of a map. (These commas also were required in the original diagnostic notation defined in [STD94] and [RFC8610].) The separator commas are now optional in the places where EDN syntax allows commas. (Stylistically, leaving out the commas is more idiomatic when they occur at line breaks.)

In addition, EDN also allows, but does not require, a trailing comma before the closing bracket/brace, enabling an easier to maintain "terminator" style of their use.

In summary, the following eight examples are all equivalent:

[1, 2, 3]
[1, 2, 3,]
[1  2  3]
[1  2  3,]
[1  2, 3]
[1  2, 3,]
[1, 2  3]
[1, 2  3,]

as are

{1: "n", "x": "a"}
{1: "n", "x": "a",}
{1: "n"  "x": "a"}
# etc.

2.5.1. Encoding Indicators of Arrays and Maps

A single underscore can be written after the opening brace of a map or the opening bracket of an array to indicate that the data item was represented in indefinite-length format. For example, [_ 1, 2] contains an indicator that an indefinite-length representation was used to represent the data item [1, 2].

2.5.2. Validity of Maps

As discussed at the start of Section 2, EDN implementations MAY support generation and possibly ingestion of EDN for CBOR data items that are well-formed but not valid.

For maps, this is relevant for map keys that occur more than once, as in:

{1: "to", 1: "fro"}

2.6. Tags

A tag is written as a decimal unsigned integer for the tag number, followed by the tag content in parentheses; for instance, a date in the format specified by RFC 3339 (ISO 8601) could be notated as:

0("2013-03-21T20:04:00Z")

or the equivalent epoch-based time as the following:

1(1363896240)

2.7. Simple values

EDN uses JSON syntax for the simple values True (>true<), False (>false<), and Null (>null<). Undefined is written >undefined< as in JavaScript.

Other simple values are given as "simple()" with the appropriate integer in the parentheses. For example, >simple(42)< indicates major type 7, value 42.

3. Application-Oriented Extension Literals

This document extends the syntax used in diagnostic notation for byte string literals to also be available for application-oriented extensions.

As per Section 8 of RFC 8949 [STD94], the diagnostic notation can notate byte strings in a number of [RFC4648] base encodings, where the encoded text is enclosed in single quotes, prefixed by an identifier (»h« for base16, »b32« for base32, »h32« for base32hex, »b64« for base64 or base64url).

This syntax can be thought to establish a name space, with the names "h", "b32", "h32", and "b64" taken, but other names being unallocated. The present specification defines additional names for this namespace, which we call application-extension identifiers. For the quoted string, the same rules apply as for byte strings. In particular, the escaping rules that were adapted from JSON strings are applied equivalently for application-oriented extensions, e.g., within the quoted string \\ stands for a single backslash and \' stands for a single quote.

An application-extension identifier is a name consisting of a lower-case ASCII letter (a-z) and zero or more additional ASCII characters that are either lower-case letters or digits (a-z0-9).

Application-extension identifiers are registered in a registry (Section 6.1).

Prefixing a single-quoted string, an application-extension identifier is used to build an application-oriented extension literal, which stands for a CBOR data item the value of which is derived from the text given in the single-quoted string using a procedure defined in the specification for an application-extension identifier.

An application-extension (such as dt) MAY also define the meaning of a variant of the application-extension identifier where each lower-case character is replaced by its upper-case counterpart (such as DT), for building an application-oriented extension literal using that all-uppercase variant as the prefix of a single-quoted string.

As a convention for such definitions, using the all-uppercase variant implies making use of a tag appropriate for this application-oriented extension (such as tag number 1 for DT).

Examples for application-oriented extensions to CBOR diagnostic notation can be found in the following sections.

3.1. The "dt" Extension

The application-extension identifier "dt" is used to notate a date/time literal that can be used as an Epoch-Based Date/Time as per Section 3.4.2 of RFC 8949 [STD94].

The text of the literal is a Standard Date/Time String as per Section 3.4.1 of RFC 8949 [STD94].

The value of the literal is a number representing the result of a conversion of the given Standard Date/Time String to an Epoch-Based Date/Time. If fractional seconds are given in the text (production time-secfrac in Figure 4), the value is a floating-point number; the value is an integer number otherwise. In the all-upper-case variant of the app-prefix, the value is enclosed in a tag number 1.

As an example, the CBOR diagnostic notation

dt'1969-07-21T02:56:16Z',
dt'1969-07-21T02:56:16.5Z',
DT'1969-07-21T02:56:16Z'

is equivalent to

-14159024,
-14159023.5,
1(-14159024)

See Section 5.2.3 for an ABNF definition for the content of dt literals.

3.2. The "ip" Extension

The application-extension identifier "ip" is used to notate an IP address literal that can be used as an IP address as per Section 3 of [RFC9164].

The text of the literal is an IPv4address or IPv6address as per Section 3.2.2 of [RFC3986].

With the lower-case app-string ip, the value of the literal is a byte string representing the binary IP address. With the upper-case app-string IP, the literal is such a byte string tagged with tag number 54, if an IPv6address is used, or tag number 52, if an IPv4address is used.

As an additional case, the upper-case app-string IP'' can be used with a prefix such as 2001:db8::/56 or 192.0.2.0/24, with the equivalent tag as its value. (Note that [RFC9164] representations of address prefixes need to implement the truncation of the address byte string as described in Section 4.2 of [RFC9164]; see example below.) For completeness, the lower-case variant ip'2001:db8::/56' or ip'192.0.2.0/24' stands for an unwrapped [56,h'20010db8'] or [24,h'c00002']; however, in this case the information on whether an address is IPv4 or IPv6 often needs to come from the context.

Note that there is no direct representation of the "Interface format" defined in Section 3.1.3 of [RFC9164], an address combined with an optional prefix length and an optional zone identifier. This can be represented as in 52([ip'192.0.2.42',24]), if needed.

Examples: the CBOR diagnostic notation

ip'192.0.2.42',
IP'192.0.2.42',
IP'192.0.2.0/24',
ip'2001:db8::42',
IP'2001:db8::42',
IP'2001:db8::/64'

is equivalent to

h'c000022a',
52(h'c000022a'),
52([24,h'c00002']),
h'20010db8000000000000000000000042',
54(h'20010db8000000000000000000000042'),
54([64,h'20010db8'])

See Section 5.2.4 for an ABNF definition for the content of ip literals.

4. Stand-in Representations in Binary CBOR

In some cases, an EDN consumer cannot construct actual CBOR items that represent the CBOR data intended for eventual interchange. This document defines stand-in representation for two such cases:

  • The EDN consumer does not know (or does not implement) an application-extension identifier used in the EDN document (Section 4.1) but wants to preserve the information for a later processor.

  • The generator of some EDN intended for human consumption (such as in a specification document) may not want to include parts of the final data item, destructively replacing complete subtrees or possibly just parts of a lengthy string by elisions (Section 4.2).

Implementation note: Typically, the ultimate applications will fail if they encounter tags unknown to them, which the ones defined in this section likely are. Where chains of tools are involved in processing EDN, it may be useful to fail earlier than at the ultimate receiver in the chain unless specific processing options (e.g., command line flags) are given that indicate which of these stand-ins are expected at this stage in the chain.

4.1. Handling unknown application-extension identifiers

When ingesting CBOR diagnostic notation, any application-oriented extension literals are usually decoded and transformed into the corresponding data item during ingestion. If an application-extension is not known or not implemented by the ingesting process, this is usually an error and processing has to stop.

However, in certain cases, it can be desirable to exceptionally carry an uninterpreted application-oriented extension literal in an ingested data item, allowing to postpone its decoding to a specific later stage of ingestion.

This specification defines a CBOR Tag for this purpose: The Diagnostic Notation Unresolved Application-Extension Tag, tag number CPA999 (Section 6.5). The content of this tag is an array of two text strings: The application-extension identifier, and the (escape-processed) content of the single-quoted string. For example, dt'1969-07-21T02:56:16Z' can be provisionally represented as /CPA/ 999(["dt", "1969-07-21T02:56:16Z"]).

If a stage of ingestion is not prepared to handle the Unresolved Application-Extension Tag, this is an error and processing has to stop, as if this stage had been ingesting an unknown or unimplemented application-extension literal itself.

RFC-Editor: This document uses the CPA (code point allocation) convention described in [I-D.bormann-cbor-draft-numbers]. For each usage of the term "CPA", please remove the prefix "CPA" from the indicated value and replace the residue with the value assigned by IANA; perform an analogous substitution for all other occurrences of the prefix "CPA" in the document. Finally, please remove this note.

4.2. Handling information deliberately elided from an EDN document

When using EDN for exposition in a document or on a whiteboard, it is often useful to be able to leave out parts of an EDN document that are not of interest at that point of the exposition.

To facilitate this, this specification supports the use of an ellipsis (notated as three or more dots in a row, as in ...) to indicate parts of an EDN document that have been elided (and therefore cannot be reconstructed).

Upon ingesting EDN as a representation of a CBOR data item for further processing, the occurrence of an ellipsis usually is an error and processing has to stop.

However, it is useful to be able to process EDN documents with ellipses in the automation scripts for the documents using them. This specification defines a CBOR Tag that can be used in the ingestion for this purpose: The Diagnostic Notation Ellipsis Tag, tag number CPA888 (Section 6.5). The content of this tag either is

  1. null (indicating a data item entirely replaced by an ellipsis), or it is

  2. an array, the elements of which are alternating between fragments of a string and the actual elisions, represented as ellipses carrying a null as content.

Elisions can stand in for entire subtrees, e.g. in:

[1, 2, ..., 3]
{ "a": 1,
  "b": ...,
  ...: ...
}

A single ellipsis (or key/value pair of ellipses) can imply eliding multiple elements in an array (members in a map); if more detailed control is required, a data definition language such as CDDL can be employed. (Note that the stand-in form defined here does not allow multiple key/value pairs with an ellipsis as a key: the CBOR data item would not be valid.)

Subtree elisions can be represented in a CBOR data item by using /CPA/888(null) as the stand-in:

[1, 2, 888(null), 3]
{ "a": 1,
  "b": 888(null),
  888(null): 888(null)
}

Elisions also can be used as part of a (text or byte) string:

{ "contract": "Herewith I buy" + ... + "gned: Alice & Bob",
  "signature": h'4711...0815',
}

The example "contract" combines string concatenation via the + operator (Section 5.1) with ellipses; while the example "signature" uses special syntax that allows the use of ellipses between the bytes notated inside h'' literals.

String elisions can be represented in a CBOR data item by a stand-in that wraps an array of string fragments alternating with ellipsis indicators:

{ "contract": /CPA/888(["Herewith I buy", 888(null),
                        "gned: Alice & Bob"]),
  "signature": 888([h'4711', 888(null), h'0815']),
}

Note that the use of elisions is different from "commenting out" EDN text, e.g.:

{ "signature": h'4711/.../0815',
  # ...: ...
}

The consumer of this EDN will ignore the comments and therefore will have no idea after ingestion that some information has been elided; validation steps may then simply fail instead of being informed about the elisions.

5. ABNF Definitions

This section collects grammars in ABNF form ([STD68] as extended in [RFC7405]) that serve to define the syntax of EDN and some application-oriented literals.

Implementation note: The ABNF definitions in this section are intended to be useful in a Parsing Expression Grammar (PEG) parser interpretation (see Appendix A of [RFC8610] for an introduction into PEG).

5.1. Overall ABNF Definition for Extended Diagnostic Notation

This subsection provides an overall ABNF definition for the syntax of CBOR extended diagnostic notation.

To complete the parsing of an app-string with prefix, say, p, the processed sqstr inside it is further parsed using the ABNF definition specified for the production app-string-p in Section 5.2.

For simplicity, the internal parsing for the built-in EDN prefixes is specified in the same way. ABNF definitions for h'' and b64'' are provided in Section 5.2.1 and Section 5.2.2. However, the prefixes b32'' and h32'' are not in wide use and an ABNF definition in this document could therefore not be based on implementation experience.

seq             = S [item S *(OC item S) OC]
one-item        = S item S
item            = map / array / tagged
                / number / simple
                / string / streamstring

string1         = (tstr / bstr) spec
string1e        = string1 / ellipsis
ellipsis        = 3*"." ; "..." or more dots
string          = string1e *(S "+" S string1e)

number          = (hexfloat / hexint / octint / binint
                   / decnumber / nonfin) spec
sign            = "+" / "-"
decnumber       = [sign] (1*DIGIT ["." *DIGIT] / "." 1*DIGIT)
                         ["e" [sign] 1*DIGIT]
hexfloat        = [sign] "0x" (1*HEXDIG ["." *HEXDIG] / "." 1*HEXDIG)
                         "p" [sign] 1*DIGIT
hexint          = [sign] "0x" 1*HEXDIG
octint          = [sign] "0o" 1*ODIGIT
binint          = [sign] "0b" 1*BDIGIT
nonfin          = %s"Infinity"
                / %s"-Infinity"
                / %s"NaN"
simple          = %s"false"
                / %s"true"
                / %s"null"
                / %s"undefined"
                / %s"simple(" S item S ")"
uint            = "0" / DIGIT1 *DIGIT
tagged          = uint spec "(" S item S ")"

app-prefix      = lcalpha *lcalnum ; including h and b64
                / ucalpha *ucalnum ; tagged variant, if defined
app-string      = app-prefix sqstr
sqstr           = "'" *single-quoted "'"
bstr            = app-string / sqstr / embedded
                  ; app-string could be any type
tstr            = DQUOTE *double-quoted DQUOTE
embedded        = "<<" seq ">>"

array           = "[" spec S [item S *(OC item S) OC] "]"
map             = "{" spec S [kp S *(OC kp S) OC] "}"
kp              = item S ":" S item

; We allow %x09 HT in prose, but not in strings
blank           = %x09 / %x0A / %x0D / %x20
non-slash       = blank / %x21-2e / %x30-D7FF / %xE000-10FFFF
non-lf          = %x09 / %x0D / %x20-D7FF / %xE000-10FFFF
S               = *blank *(comment *blank)
comment         = "/" *non-slash "/"
                / "#" *non-lf %x0A

; optional comma (ignored)
OC              = ["," S]

; check semantically that strings are either all text or all bytes
; note that there must be at least one string to distinguish
streamstring    = "(_" S string S *(OC string S) OC ")"
spec            = ["_" *wordchar]

double-quoted   = unescaped
                / "'"
                / "\" DQUOTE
                / "\" escapable

single-quoted   = unescaped
                / DQUOTE
                / "\" "'"
                / "\" escapable

escapable       = %s"b" ; BS backspace U+0008
                / %s"f" ; FF form feed U+000C
                / %s"n" ; LF line feed U+000A
                / %s"r" ; CR carriage return U+000D
                / %s"t" ; HT horizontal tab U+0009
                / "/"   ; / slash (solidus) U+002F (JSON!)
                / "\"   ; \ backslash (reverse solidus) U+005C
                / (%s"u" hexchar) ;  uXXXX      U+XXXX

hexchar         = "{" (1*"0" [ hexscalar ] / hexscalar) "}"
                / non-surrogate
                / (high-surrogate "\" %s"u" low-surrogate)
non-surrogate   = ((DIGIT / "A"/"B"/"C" / "E"/"F") 3HEXDIG)
                / ("D" ODIGIT 2HEXDIG )
high-surrogate  = "D" ("8"/"9"/"A"/"B") 2HEXDIG
low-surrogate   = "D" ("C"/"D"/"E"/"F") 2HEXDIG
hexscalar       = "10" 4HEXDIG / HEXDIG1 4HEXDIG
                / non-surrogate / 1*3HEXDIG

; Note that no other C0 characters are allowed, including %x09 HT
unescaped       = %x0A ; new line
                / %x0D ; carriage return -- ignored on input
                / %x20-21
                     ; omit 0x22 "
                / %x23-26
                     ; omit 0x27 '
                / %x28-5B
                     ; omit 0x5C \
                / %x5D-D7FF ; skip surrogate code points
                / %xE000-10FFFF

DQUOTE          = %x22    ; " double quote
DIGIT           = %x30-39 ; 0-9
DIGIT1          = %x31-39 ; 1-9
ODIGIT          = %x30-37 ; 0-7
BDIGIT          = %x30-31 ; 0-1
HEXDIG          = DIGIT / "A" / "B" / "C" / "D" / "E" / "F"
HEXDIG1         = DIGIT1 / "A" / "B" / "C" / "D" / "E" / "F"
; Note: double-quoted strings as in "A" are case-insensitive in ABNF
lcalpha         = %x61-7A ; a-z
lcalnum         = lcalpha / DIGIT
ucalpha         = %x41-5A ; A-Z
ucalnum         = ucalpha / DIGIT
wordchar        = "_" / lcalnum / ucalpha ; [_a-z0-9A-Z]
Figure 1: Overall ABNF Definition of CBOR EDN

While an ABNF grammar defines the set of character strings that are considered to be valid EDN by this ABNF, the mapping of these character strings into the generic data model of CBOR is not always obvious.

The following additional items should help in the interpretation:

  • As mentioned in the terminology (Section 1.2), the ABNF terminal values in this document define Unicode scalar values (characters) rather than their UTF-8 encoding. For example, the Unicode PLACE OF INTEREST SIGN (U+2318) would be defined in ABNF as %x2318.

  • Unicode CARRIAGE RETURN (U+000D, often seen escaped as "\r" in many programming languages) that exist in the input (unescaped) are ignored as if they were not in the input wherever they appear. This is most important when they are found in (text or byte) string contexts (see the "unescaped" ABNF rule). On some platforms, a carriage return is always added in front of a LINE FEED (U+000A, also often seen escaped as "\n" in many programming languages), but on other platforms, carriage returns are not used at line breaks. The intent behind ignoring unescaped carriage returns is to ensure that input generated or processed on either of these kinds of platforms will generate the same bytes in the CBOR data items created from that input. (Platforms that use just a CARRIAGE RETURN to signify an end of line are no longer relevant and the files they produce are out of scope for this document.) If a carriage return is needed in the CBOR data item, it can be added explicitly using the escaped form \r.

  • decnumber stands for an integer in the usual decimal notation, unless at least one of the optional parts starting with "." and "e" are present, in which case it stands for a floating point value in the usual decimal notation. Note that the grammar now allows 3. for 3.0 and .3 for 0.3 (also for hexadecimal floating point below); implementers are advised that some platform numeric parsers accept only a subset of the floating point syntax in this document and may require some preprocessing to use here.

  • hexint, octint, and binint stand for an integer in the usual base 16/hexadecimal ("0x"), base 8/octal ("0o"), or base 2/binary ("0b") notation. hexfloat stands for a floating point number in the usual hexadecimal notation (which uses a mantissa in hexadecimal and an exponent in decimal notation, see Section 5.12.3 of [IEEE754], Section 6.4.4.2 of [C], or Section 5.13.4 of [Cplusplus]; floating-suffix/floating-point-suffix from the latter two is not used here).

  • For hexint, octint, binint, and when decnumber stands for an integer, the corresponding CBOR data item is represented using major type 0 or 1 if possible, or using tag 2 or 3 if not. In the latter case, this specification does not define any encoding indicators that apply. If fine control over encoding is desired, this can be expressed by being explicit about the representation as a tag: E.g., 987654321098765432310, which is equivalent to 2(h'35 8a 75 04 38 f3 80 f5 f6') in its preferred serialization, might be written as 2_3(h'00 00 00 35 8a 75 04 38 f3 80 f5 f6'_1) if leading zeros need to be added during serialization to obtain specific sizes for tag head, byte string head, and the overall byte string.

    When decnumber stands for a floating point value, and for hexfloat and nonfin, a floating point data item with major type 7 is used in preferred serialization (unless modified by an encoding indicator, which then needs to be _1, _2, or _3). For this, the number range needs to fit into an [IEEE754] binary64 (or the size corresponding to the encoding indicator), and the precision will be adjusted to binary64 before further applying preferred serialization (or to the size corresponding to the encoding indicator). Tag 4/5 representations are not generated in these cases. Future app-prefixes could be defined to allow more control for obtaining a tag 4/5 representation directly from a hex or decimal floating point literal.

  • spec stands for an encoding indicator.

    (In the following, an abbreviation of the form ai=nn gives nn as the numeric value of the field additional information, the low-order 5 bits of the initial byte: see Section 3 of RFC 8949 [STD94].)

    As per Section 8.1 of RFC 8949 [STD94]:

    • an underscore _ on its own stands for indefinite length encoding (ai=31, only available behind the opening brace/bracket for map and array: strings have a special syntax streamstring for indefinite length encoding except for the special cases ''_ and ""_), and

    • _0 to _3 stand for ai=24 to ai=27, respectively.

    Surprisingly, Section 8.1 of RFC 8949 [STD94] does not address ai=0 to ai=23 — the assumption seems to be that preferred serialization (Section 4.1 of RFC 8949 [STD94]) will be used when converting CBOR diagnostic notation to an encoded CBOR data item, so leaving out the encoding indicator for a data item with a preferred serialization will implicitly use ai=0 to ai=23 if that is possible. The present specification allows to make this explicit:

    • _i ("immediate") stands for encoding with ai=0 to ai=23.

    While no pressing use for further values for encoding indicators comes to mind, this is an extension point for EDN; Section 6.2 defines a registry for additional values.

  • Extended diagnostic notation allows a (text or byte) string to be built up from multiple (text or byte) string literals, separated by a + operator; these are then concatenated into a single string.

string, string1e, string1, and ellipsis realize: (1) the representation of strings in this form split up into multiple chunks, and (2) the use of ellipses to represent elisions (Section 4.2).

Note that the syntax defined here for concatenation of components uses an explicit + operator between the components to be concatenated (Appendix G.4 of [RFC8610] used simple juxtaposition, which was not widely implemented and got in the way of making the use of commas optional in other places via the rule OC).

Text strings and byte strings do not mix within such a concatenation, except that byte string literal notation can be used inside a sequence of concatenated text string notation literals, to encode characters that may be better represented in an encoded way. The following four text string values (adapted from Appendix G.4 of [RFC8610] by updating to explicit + operators) are equivalent:

  "Hello world"
  "Hello " + "world"
  "Hello" + h'20' + "world"
  "" + h'48656c6c6f20776f726c64' + ""

Similarly, the following byte string values are equivalent:

  'Hello world'
  'Hello ' + 'world'
  'Hello ' + h'776f726c64'
  'Hello' + h'20' + 'world'
  '' + h'48656c6c6f20776f726c64' + '' + b64''
  h'4 86 56c 6c6f' + h' 20776 f726c64'

The semantic processing of these constructs is governed by the following rules:

  • A single ... is a general ellipsis, which by itself can stand for any data item. Multiple adjacent concatenated ellipses are equivalent to a single ellipsis.

  • An ellipsis can be concatenated (on one or both sides) with string chunks (string1); the result is a CBOR tag number CPA888 that contains an array with joined together spans of such chunks plus the ellipses represented by 888(null).

  • If there is no ellipsis in the concatenated list, the result of processing the list will always be a single item.

  • The bytes in the concatenated sequence of string chunks are simply joined together, proceeding from left to right. If the left hand side of a concatenation is a text string, the joining operation results in a text string, and that result needs to be valid UTF-8. If the left hand side is a byte string, the right hand side also needs to be a byte string.

  • Some of the strings may be app-strings. If the result type of the app-string is an actual (text or byte) string, joining of those string chunks occurs as with chunks directly notated as string literals; otherwise the occurrence of more than one app-string or an app-string together with a directly notated string cannot be processed.

5.2. ABNF Definitions for app-string Content

This subsection provides ABNF definitions for application-oriented extension literals defined in [STD94] and in this specification. These grammars describe the decoded content of the sqstr components that combine with the application-extension identifiers to form application-oriented extension literals. Each of these may make use of ABNF rules defined in Figure 1.

5.2.1. h: ABNF Definition of Hexadecimal representation of a byte string

The syntax of the content of byte strings represented in hex, such as h'', h'0815', or h'/head/ 63 /contents/ 66 6f 6f' (another representation of << "foo" >>), is described by the ABNF in Figure 2. This syntax accommodates both lower case and upper case hex digits, as well as blank space (including comments) around each hex digit.

app-string-h    = S *(HEXDIG S HEXDIG S / ellipsis S)
                  ["#" *non-lf]
ellipsis        = 3*"."
HEXDIG          = DIGIT / "A" / "B" / "C" / "D" / "E" / "F"
DIGIT           = %x30-39 ; 0-9
blank           = %x09 / %x0A / %x0D / %x20
non-slash       = blank / %x21-2e / %x30-10FFFF
non-lf          = %x09 / %x0D / %x20-D7FF / %xE000-10FFFF
S               = *blank *(comment *blank )
comment         = "/" *non-slash "/"
                / "#" *non-lf %x0A
Figure 2: ABNF Definition of Hexadecimal Representation of a Byte String

5.2.2. b64: ABNF Definition of Base64 representation of a byte string

The syntax of the content of byte strings represented in base64 is described by the ABNF in Figure 2.

This syntax allows both the classic (Section 4 of [RFC4648]) and the URL-safe (Section 5 of [RFC4648]) alphabet to be used. It accommodates, but does not require base64 padding. Note that inclusion of classic base64 makes it impossible to have in-line comments in b64, as "/" is valid base64-classic.

app-string-b64  = B *(4(b64dig B))
                  [b64dig B b64dig B ["=" B "=" / b64dig B ["="]] B]
                  ["#" *inon-lf]
b64dig          = ALPHA / DIGIT / "-" / "_" / "+" / "/"
B               = *iblank *(icomment *iblank)
iblank          = %x0A / %x20  ; Not HT or CR (gone)
icomment        = "#" *inon-lf %x0A
inon-lf         = %x20-D7FF / %xE000-10FFFF
ALPHA           = %x41-5a / %x61-7a
DIGIT           = %x30-39
Figure 3: ABNF definition of Base64 Representation of a Byte String

5.2.3. dt: ABNF Definition of RFC 3339 Representation of a Date/Time

The syntax of the content of dt literals can be described by the ABNF for date-time from [RFC3339] as summarized in Section 3 of [RFC9165]:

app-string-dt   = date-time

date-fullyear   = 4DIGIT
date-month      = 2DIGIT  ; 01-12
date-mday       = 2DIGIT  ; 01-28, 01-29, 01-30, 01-31 based on
                          ; month/year
time-hour       = 2DIGIT  ; 00-23
time-minute     = 2DIGIT  ; 00-59
time-second     = 2DIGIT  ; 00-58, 00-59, 00-60 based on leap sec
                          ; rules
time-secfrac    = "." 1*DIGIT
time-numoffset  = ("+" / "-") time-hour ":" time-minute
time-offset     = "Z" / time-numoffset

partial-time    = time-hour ":" time-minute ":" time-second
                  [time-secfrac]
full-date       = date-fullyear "-" date-month "-" date-mday
full-time       = partial-time time-offset

date-time       = full-date "T" full-time
DIGIT           =  %x30-39 ; 0-9
Figure 4: ABNF Definition of RFC3339 Representation of a Date/Time

5.2.4. ip: ABNF Definition of Textual Representation of an IP Address

The syntax of the content of ip literals can be described by the ABNF for IPv4address and IPv6address in Section 3.2.2 of [RFC3986], as included in slightly updated form in Figure 5.

app-string-ip = IPaddress ["/" uint]

IPaddress     = IPv4address
              / IPv6address

; ABNF from RFC 3986, re-arranged for PEG compatibility:

IPv6address   =                            6( h16 ":" ) ls32
              /                       "::" 5( h16 ":" ) ls32
              / [ h16               ] "::" 4( h16 ":" ) ls32
              / [ h16 *1( ":" h16 ) ] "::" 3( h16 ":" ) ls32
              / [ h16 *2( ":" h16 ) ] "::" 2( h16 ":" ) ls32
              / [ h16 *3( ":" h16 ) ] "::"    h16 ":"   ls32
              / [ h16 *4( ":" h16 ) ] "::"              ls32
              / [ h16 *5( ":" h16 ) ] "::"              h16
              / [ h16 *6( ":" h16 ) ] "::"

h16           = 1*4HEXDIG
ls32          = ( h16 ":" h16 ) / IPv4address
IPv4address   = dec-octet "." dec-octet "." dec-octet "." dec-octet
dec-octet     = "25" %x30-35         ; 250-255
              / "2" %x30-34 DIGIT    ; 200-249
              / "1" 2DIGIT           ; 100-199
              / %x31-39 DIGIT        ; 10-99
              / DIGIT                ; 0-9

HEXDIG        = DIGIT / "A" / "B" / "C" / "D" / "E" / "F"
DIGIT         = %x30-39 ; 0-9
DIGIT1        = %x31-39 ; 1-9
uint          = "0" / DIGIT1 *DIGIT
Figure 5: ABNF Definition of Textual Representation of an IP Address

6. IANA Considerations

RFC Editor: please replace RFC-XXXX with the RFC number of this RFC, [IANA.cbor-diagnostic-notation] with a reference to the new registry group, and remove this note.

6.1. CBOR Diagnostic Notation Application-extension Identifiers Registry

IANA is requested to create an "Application-Extension Identifiers" registry in a new "CBOR Diagnostic Notation" registry group [IANA.cbor-diagnostic-notation], with the policy "expert review" (Section 4.5 of RFC 8126 [BCP26]).

The experts are instructed to be frugal in the allocation of application-extension identifiers that are suggestive of generally applicable semantics, keeping them in reserve for application-extensions that are likely to enjoy wide use and can make good use of their conciseness. The expert is also instructed to direct the registrant to provide a specification (Section 4.6 of RFC 8126 [BCP26]), but can make exceptions, for instance when a specification is not available at the time of registration but is likely forthcoming. If the expert becomes aware of application-extension identifiers that are deployed and in use, they may also initiate a registration on their own if they deem such a registration can avert potential future collisions.

Each entry in the registry must include:

Application-Extension Identifier:

a lower case ASCII [STD80] string that starts with a letter and can contain letters and digits after that ([a-z][a-z0-9]*). No other entry in the registry can have the same application-extension identifier.

Description:

a brief description

Change Controller:

(see Section 2.3 of RFC 8126 [BCP26])

Reference:

a reference document that provides a description of the application-extension identifier

The initial content of the registry is shown in Table 1; all initial entries have the Change Controller "IETF".

Table 1: Initial Content of Application-extension Identifier Registry
Application-extension Identifier Description Reference
h Reserved RFC8949
b32 Reserved RFC8949
h32 Reserved RFC8949
b64 Reserved RFC8949
dt Date/Time RFC-XXXX
ip IP Address/Prefix RFC-XXXX

6.2. Encoding Indicators

IANA is requested to create an "Encoding Indicators" registry in the newly created "CBOR Diagnostic Notation" registry group [IANA.cbor-diagnostic-notation], with the policy "specification required" (Section 4.6 of RFC 8126 [BCP26]).

The experts are instructed to be frugal in the allocation of encoding indicators that are suggestive of generally applicable semantics, keeping them in reserve for encoding indicator registrations that are likely to enjoy wide use and can make good use of their conciseness. If the expert becomes aware of encoding indicators that are deployed and in use, they may also solicit a specification and initiate a registration on their own if they deem such a registration can avert potential future collisions.

Each entry in the registry must include:

Encoding Indicator:

an ASCII [STD80] string that starts with an underscore letter and can contain zero or more underscores, letters and digits after that (_[_A-Za-z0-9]*). No other entry in the registry can have the same Encoding Indicator.

Description:

a brief description. This description may employ an abbreviation of the form ai=nn, where nn is the numeric value of the field additional information, the low-order 5 bits of the initial byte (see Section 3 of RFC 8949 [STD94]).

Change Controller:

(see Section 2.3 of RFC 8126 [BCP26])

Reference:

a reference document that provides a description of the application-extension identifier

The initial content of the registry is shown in Table 2; all initial entries have the Change Controller "IETF".

Table 2: Initial Content of Encoding Indicator Registry
Encoding Indicator Description Reference
_ Indefinite Length Encoding (ai=31) RFC8949, RFC-XXXX
_i ai=0 to ai=23 RFC-XXXX
_0 ai=24 RFC8949, RFC-XXXX
_1 ai=25 RFC8949, RFC-XXXX
_2 ai=26 RFC8949, RFC-XXXX
_3 ai=27 RFC8949, RFC-XXXX

6.3. Media Type

IANA is requested to add the following Media-Type to the "Media Types" registry [IANA.media-types].

Table 3: New Media Type application/cbor-diagnostic
Name Template Reference
cbor-diagnostic application/cbor-diagnostic RFC-XXXX, Section 6.3
Type name:

application

Subtype name:

cbor-diagnostic

Required parameters:

N/A

Optional parameters:

N/A

Encoding considerations:

binary (UTF-8)

Security considerations:

Section 7 of RFC XXXX

Interoperability considerations:

none

Published specification:

Section 6.3 of RFC XXXX

Applications that use this media type:

Tools interchanging a human-readable form of CBOR

Fragment identifier considerations:

The syntax and semantics of fragment identifiers is as specified for "application/cbor". (At publication of RFC XXXX, there is no fragment identification syntax defined for "application/cbor".)

Additional information:


Deprecated alias names for this type:

N/A

Magic number(s):

N/A

File extension(s):

.diag

Macintosh file type code(s):

N/A

Person & email address to contact for further information:

CBOR WG mailing list (cbor@ietf.org), or IETF Applications and Real-Time Area (art@ietf.org)

Intended usage:

LIMITED USE

Restrictions on usage:

CBOR diagnostic notation represents CBOR data items, which are the format intended for actual interchange. The media type application/cbor-diagnostic is intended to be used within documents about CBOR data items, in diagnostics for human consumption, and in other representations of CBOR data items that are necessarily text-based such as in configuration files or other data edited by humans, often under source-code control.

Author/Change controller:

IETF

Provisional registration:

no

6.4. Content-Format

IANA is requested to register a Content-Format number in the "CoAP Content-Formats" sub-registry, within the "Constrained RESTful Environments (CoRE) Parameters" Registry [IANA.core-parameters], as follows:

Table 4: New Content-Format
Content-Type Content Coding ID Reference
application/cbor-diagnostic - TBD1 RFC-XXXX

TBD1 is to be assigned from the space 256..9999, according to the procedure "IETF Review or IESG Approval", preferably a number less than 1000.

6.5. Stand-in Tags

RFC-Editor: This document uses the CPA (code point allocation) convention described in [I-D.bormann-cbor-draft-numbers]. For each usage of the term "CPA", please remove the prefix "CPA" from the indicated value and replace the residue with the value assigned by IANA; perform an analogous substitution for all other occurrences of the prefix "CPA" in the document. Finally, please remove this note.

In the "CBOR Tags" registry [IANA.cbor-tags], IANA is requested to assign the tags in Table 5 from the "specification required" space (suggested assignments: 888 and 999), with the present document as the specification reference.

Table 5: Values for Tags
Tag Data Item Semantics Reference
CPA888 null or array Diagnostic Notation Ellipsis RFC-XXXX
CPA999 array Diagnostic Notation
Unresolved Application-Extension
RFC-XXXX

7. Security considerations

The security considerations of [STD94] and [RFC8610] apply.

The EDN specification provides two explicit extension points, application-extension identifiers (Section 6.1) and encoding indicators (Section 6.2). Extensions introduced this way can have their own security considerations (see, e.g., Section 5 of [I-D.ietf-cbor-edn-e-ref]). When implementing tools that support the use of EDN extensions, the implementer needs to be careful not to inadvertently introduce a vector for an attacker to invoke extensions not planned for by the tool operator, who might not have considered security considerations of specific extensions such as those posed by their use of dereferenceable identifiers (Section 6 of [I-D.bormann-t2trg-deref-id]). For instance, tools might require explicitly enabling the use of each extension that is not on an allowlist. This task can possibly be made less onerous by combining it with a mechanism for supplying any parameters controlling such an extension.

8. References

8.1. Normative References

[BCP26]
Best Current Practice 26, <https://www.rfc-editor.org/info/bcp26>.
At the time of writing, this BCP comprises the following:
Cotton, M., Leiba, B., and T. Narten, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 8126, DOI 10.17487/RFC8126, , <https://www.rfc-editor.org/info/rfc8126>.
[C]
International Organization for Standardization, "Information technology — Programming languages — C", Fourth Edition, ISO/IEC 9899:2018, , <https://www.iso.org/standard/74528.html>. The text of the standard is also available via https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2310.pdf
[Cplusplus]
International Organization for Standardization, "Programming languages — C++", Sixth Edition, ISO/IEC 14882:2020, , <https://www.iso.org/standard/79358.html>. The text of the standard is also available via https://isocpp.org/files/papers/N4860.pdf
[IANA.cbor-tags]
IANA, "Concise Binary Object Representation (CBOR) Tags", <https://www.iana.org/assignments/cbor-tags>.
[IANA.core-parameters]
IANA, "Constrained RESTful Environments (CoRE) Parameters", <https://www.iana.org/assignments/core-parameters>.
[IANA.media-types]
IANA, "Media Types", <https://www.iana.org/assignments/media-types>.
[IEEE754]
IEEE, "IEEE Standard for Floating-Point Arithmetic", IEEE Std 754-2019, DOI 10.1109/IEEESTD.2019.8766229, <https://ieeexplore.ieee.org/document/8766229>.
[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/rfc/rfc2119>.
[RFC3339]
Klyne, G. and C. Newman, "Date and Time on the Internet: Timestamps", RFC 3339, DOI 10.17487/RFC3339, , <https://www.rfc-editor.org/rfc/rfc3339>.
[RFC3986]
Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, , <https://www.rfc-editor.org/rfc/rfc3986>.
[RFC7405]
Kyzivat, P., "Case-Sensitive String Support in ABNF", RFC 7405, DOI 10.17487/RFC7405, , <https://www.rfc-editor.org/rfc/rfc7405>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/rfc/rfc8174>.
[RFC8742]
Bormann, C., "Concise Binary Object Representation (CBOR) Sequences", RFC 8742, DOI 10.17487/RFC8742, , <https://www.rfc-editor.org/rfc/rfc8742>.
[RFC9164]
Richardson, M. and C. Bormann, "Concise Binary Object Representation (CBOR) Tags for IPv4 and IPv6 Addresses and Prefixes", RFC 9164, DOI 10.17487/RFC9164, , <https://www.rfc-editor.org/rfc/rfc9164>.
[STD68]
Internet Standard 68, <https://www.rfc-editor.org/info/std68>.
At the time of writing, this STD comprises the following:
Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, DOI 10.17487/RFC5234, , <https://www.rfc-editor.org/info/rfc5234>.
[STD80]
Internet Standard 80, <https://www.rfc-editor.org/info/std80>.
At the time of writing, this STD comprises the following:
Cerf, V., "ASCII format for network interchange", STD 80, RFC 20, DOI 10.17487/RFC0020, , <https://www.rfc-editor.org/info/rfc20>.
[STD94]
Internet Standard 94, <https://www.rfc-editor.org/info/std94>.
At the time of writing, this STD comprises the following:
Bormann, C. and P. Hoffman, "Concise Binary Object Representation (CBOR)", STD 94, RFC 8949, DOI 10.17487/RFC8949, , <https://www.rfc-editor.org/info/rfc8949>.

8.2. Informative References

[I-D.bormann-cbor-numbers]
Bormann, C., "On Numbers in CBOR", Work in Progress, Internet-Draft, draft-bormann-cbor-numbers-00, , <https://datatracker.ietf.org/doc/html/draft-bormann-cbor-numbers-00>.
[I-D.bormann-t2trg-deref-id]
Bormann, C. and C. Amsüss, "The "dereferenceable identifier" pattern", Work in Progress, Internet-Draft, draft-bormann-t2trg-deref-id-04, , <https://datatracker.ietf.org/doc/html/draft-bormann-t2trg-deref-id-04>.
[I-D.ietf-cbor-edn-e-ref]
Bormann, C., "External References to Values in CBOR Diagnostic Notation (EDN)", Work in Progress, Internet-Draft, draft-ietf-cbor-edn-e-ref-00, , <https://datatracker.ietf.org/doc/html/draft-ietf-cbor-edn-e-ref-00>.
[I-D.ietf-cbor-update-8610-grammar]
Bormann, C., "Updates to the CDDL grammar of RFC 8610", Work in Progress, Internet-Draft, draft-ietf-cbor-update-8610-grammar-06, , <https://datatracker.ietf.org/doc/html/draft-ietf-cbor-update-8610-grammar-06>.
[RFC4648]
Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, DOI 10.17487/RFC4648, , <https://www.rfc-editor.org/rfc/rfc4648>.
[RFC7049]
Bormann, C. and P. Hoffman, "Concise Binary Object Representation (CBOR)", RFC 7049, DOI 10.17487/RFC7049, , <https://www.rfc-editor.org/rfc/rfc7049>.
[RFC7493]
Bray, T., Ed., "The I-JSON Message Format", RFC 7493, DOI 10.17487/RFC7493, , <https://www.rfc-editor.org/rfc/rfc7493>.
[RFC8610]
Birkholz, H., Vigano, C., and C. Bormann, "Concise Data Definition Language (CDDL): A Notational Convention to Express Concise Binary Object Representation (CBOR) and JSON Data Structures", RFC 8610, DOI 10.17487/RFC8610, , <https://www.rfc-editor.org/rfc/rfc8610>.
[RFC9165]
Bormann, C., "Additional Control Operators for the Concise Data Definition Language (CDDL)", RFC 9165, DOI 10.17487/RFC9165, , <https://www.rfc-editor.org/rfc/rfc9165>.
[RFC9290]
Fossati, T. and C. Bormann, "Concise Problem Details for Constrained Application Protocol (CoAP) APIs", RFC 9290, DOI 10.17487/RFC9290, , <https://www.rfc-editor.org/rfc/rfc9290>.
[RFC9512]
Polli, R., Wilde, E., and E. Aro, "YAML Media Type", RFC 9512, DOI 10.17487/RFC9512, , <https://www.rfc-editor.org/rfc/rfc9512>.
[STD90]
Internet Standard 90, <https://www.rfc-editor.org/info/std90>.
At the time of writing, this STD comprises the following:
Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", STD 90, RFC 8259, DOI 10.17487/RFC8259, , <https://www.rfc-editor.org/info/rfc8259>.
[YAML]
Ben-Kiki, O., Evans, C., and I. döt Net, "YAML Ain't Markup Language (YAML™) Version 1.2", Revision 1.2.2, , <https://yaml.org/spec/1.2.2/>.

Appendix A. EDN and CDDL

This appendix is for information.

EDN was designed as a language to provide a human-readable representation of an instance, i.e., a single CBOR data item or CBOR sequence. CDDL was designed as a language to describe an (often large) set of such instances (which itself constitutes a language), in the form of a data definition or grammar (or sometimes called schema).

The two languages share some similarities, not the least because they have mutually inspired each other. But they have very different roots:

  • EDN syntax is an extension to JSON syntax [STD90]. (Any (interoperable) JSON text is also valid EDN.)

  • CDDL syntax is inspired by ABNF's syntax [STD68].

For engineers that are using both EDN and CDDL, it is easy to write "CDDLisms" or "EDNisms" into their drafts that are meant to be in the other language. (This is one more of the many motivations to always validate formal language instances with tools.)

Important differences include:

  • Comment syntax. CDDL inherits ABNF's semicolon-delimited end of line characters, while EDN finds nothing in JSON that could be inherited here. Inspired by JavaScript, EDN simplifies JavaScript's copy of the original C comment syntax to be delimited by single slashes (where line breaks are not of interest); it also adds end-of-line comments starting with #.

    EDN:
    { / alg / 1: -7 / ECDSA 256 / }
    ,
    { 1:   # alg
        -7 # ECDSA 256
    }
    
    CDDL:

    ? 1 => int / tstr, ; algorithm identifier

  • Syntax for tags. CDDL's tag syntax is part of the system for referring to CBOR's fundamentals (the major type 6, in this case) and (with [I-D.ietf-cbor-update-8610-grammar]) allows specifying the actual tag number separately, while EDN's tag syntax is a simple decimal number and a pair of parentheses.

    EDN:
    98([h'', # empty encoded protected header
        {},  # empty unprotected header
        ...  # rest elided here
       ])
    
    CDDL:

    COSE_Sign_Tagged = #6.98(COSE_Sign)

  • Embedded CBOR. EDN has a special syntax to describe the content of byte strings that are encoded CBOR data items. CDDL can specify these with a control operator, which looks very different.

    EDN:
    98([<< {/alg/ 1: -7 /ECDSA 256/} >>, # == h'a10126'
        ...                              # rest elided here
       ])
    
    CDDL:

    serialized_map = bytes .cbor header_map

Acknowledgements

The concept of application-oriented extensions to diagnostic notation, as well as the definition for the "dt" extension, were inspired by the CoRAL work by Klaus Hartke.

(TBD)

Author's Address

Carsten Bormann
Universität Bremen TZI
Postfach 330440
D-28359 Bremen
Germany