Network Working Group J. Jeong, Ed.
Internet-Draft P. Lingga
Intended status: Standards Track Sungkyunkwan University
Expires: 19 August 2022 S. Hares
L. Xia
Huawei
H. Birkholz
Fraunhofer SIT
15 February 2022
I2NSF NSF Monitoring Interface YANG Data Model
draft-ietf-i2nsf-nsf-monitoring-data-model-15
Abstract
This document proposes an information model and the corresponding
YANG data model of an interface for monitoring Network Security
Functions (NSFs) in the Interface to Network Security Functions
(I2NSF) framework. If the monitoring of NSFs is performed with the
NSF monitoring interface in a standard way, it is possible to detect
the indication of malicious activity, anomalous behavior, the
potential sign of denial-of-service attacks, or system overload in a
timely manner. This monitoring functionality is based on the
monitoring information that is generated by NSFs. Thus, this
document describes not only an information model for the NSF
monitoring interface along with a YANG tree diagram, but also the
corresponding YANG data model.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on 19 August 2022.
Jeong, et al. Expires 19 August 2022 [Page 1]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
Copyright Notice
Copyright (c) 2022 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/
license-info) in effect on the date of publication of this document.
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document. Code Components
extracted from this document must include Revised BSD License text as
described in Section 4.e of the Trust Legal Provisions and are
provided without warranty as described in the Revised BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Use Cases for NSF Monitoring Data . . . . . . . . . . . . . . 5
4. Classification of NSF Monitoring Data . . . . . . . . . . . . 5
4.1. Retention and Emission from NSFs . . . . . . . . . . . . 6
4.2. Notifications for Events and Records . . . . . . . . . . 7
4.3. Push and Pull for the retrieval of monitoring data from
NSFs . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5. Basic Information Model for Monitoring Data . . . . . . . . . 9
6. Extended Information Model for Monitoring Data . . . . . . . 10
6.1. System Alarms . . . . . . . . . . . . . . . . . . . . . . 11
6.1.1. Memory Alarm . . . . . . . . . . . . . . . . . . . . 11
6.1.2. CPU Alarm . . . . . . . . . . . . . . . . . . . . . . 11
6.1.3. Disk Alarm . . . . . . . . . . . . . . . . . . . . . 12
6.1.4. Hardware Alarm . . . . . . . . . . . . . . . . . . . 12
6.1.5. Interface Alarm . . . . . . . . . . . . . . . . . . . 12
6.2. System Events . . . . . . . . . . . . . . . . . . . . . . 13
6.2.1. Access Violation . . . . . . . . . . . . . . . . . . 13
6.2.2. Configuration Change . . . . . . . . . . . . . . . . 14
6.2.3. Session Table Event . . . . . . . . . . . . . . . . . 15
6.2.4. Traffic Flows . . . . . . . . . . . . . . . . . . . . 15
6.3. NSF Events . . . . . . . . . . . . . . . . . . . . . . . 16
6.3.1. DDoS Detection . . . . . . . . . . . . . . . . . . . 16
6.3.2. Virus Event . . . . . . . . . . . . . . . . . . . . . 17
6.3.3. Intrusion Event . . . . . . . . . . . . . . . . . . . 18
6.3.4. Web Attack Event . . . . . . . . . . . . . . . . . . 19
6.3.5. VoIP/VoCN Event . . . . . . . . . . . . . . . . . . . 19
6.4. System Logs . . . . . . . . . . . . . . . . . . . . . . . 20
6.4.1. Access Log . . . . . . . . . . . . . . . . . . . . . 20
6.4.2. Resource Utilization Log . . . . . . . . . . . . . . 21
6.4.3. User Activity Log . . . . . . . . . . . . . . . . . . 22
6.5. NSF Logs . . . . . . . . . . . . . . . . . . . . . . . . 23
Jeong, et al. Expires 19 August 2022 [Page 2]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
6.5.1. Deep Packet Inspection Log . . . . . . . . . . . . . 23
6.6. System Counter . . . . . . . . . . . . . . . . . . . . . 23
6.6.1. Interface Counter . . . . . . . . . . . . . . . . . . 23
6.7. NSF Counters . . . . . . . . . . . . . . . . . . . . . . 25
6.7.1. Firewall Counter . . . . . . . . . . . . . . . . . . 25
6.7.2. Policy Hit Counter . . . . . . . . . . . . . . . . . 26
7. YANG Tree Structure of NSF Monitoring YANG Module . . . . . . 27
8. YANG Data Model of NSF Monitoring YANG Module . . . . . . . . 35
9. I2NSF Event Stream . . . . . . . . . . . . . . . . . . . . . 84
10. XML Examples for I2NSF NSF Monitoring . . . . . . . . . . . . 85
10.1. I2NSF System Detection Alarm . . . . . . . . . . . . . . 85
10.2. I2NSF Interface Counters . . . . . . . . . . . . . . . . 87
11. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 89
12. Security Considerations . . . . . . . . . . . . . . . . . . . 89
13. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 91
14. Contributors . . . . . . . . . . . . . . . . . . . . . . . . 91
15. References . . . . . . . . . . . . . . . . . . . . . . . . . 92
15.1. Normative References . . . . . . . . . . . . . . . . . . 92
15.2. Informative References . . . . . . . . . . . . . . . . . 96
Appendix A. Changes from
draft-ietf-i2nsf-nsf-monitoring-data-model-14 . . . . . . 97
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 97
1. Introduction
According to [RFC8329], the interface provided by a Network Security
Function (NSF) (e.g., Firewall, IPS, or Anti-DDoS function) to enable
the collection of monitoring information is referred to as an I2NSF
Monitoring Interface. This interface enables the sharing of vital
data from the NSFs (e.g., events, records, and counters) to the NSF
data collector through a variety of mechanisms (e.g., queries and
notifications). The monitoring of NSF plays an important role in an
overall security framework, if it is done in a timely way. The
monitoring information generated by an NSF can be a good, early
indication of anomalous behavior or malicious activity, such as
denial-of-service (DoS) attacks.
This document defines an information model of an NSF monitoring
interface that provides visibility into an NSF for the NSF data
collector. Note that an NSF data collector is defined as an entity
to collect NSF monitoring data from an NSF, such as Security
Controller. It specifies the information and illustrates the methods
that enable an NSF to provide the information required in order to be
monitored in a scalable and efficient way via the NSF Monitoring
Interface. The information model for the NSF monitoring interface
presented in this document is complementary for the security policy
provisioning functionality of the NSF-Facing Interface specified in
[I-D.ietf-i2nsf-nsf-facing-interface-dm].
Jeong, et al. Expires 19 August 2022 [Page 3]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
This document also defines a YANG [RFC7950] data model for the NSF
monitoring interface, which is derived from the information model for
the NSF monitoring interface.
Note that this document covers a subset of monitoring data for
systems and NSFs, which are related to security.
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
This document uses the terminology described in [RFC8329]. In
addition, the following terms are defined in this document:
* I2NSF User: An entity that delivers a high-level security policy
to the Security Controller and may request monitoring information
via the NSF data collector.
* Monitoring Information: Relevant data that can be processed to
know the status and performance of the network and the NSF. The
monitoring information in an I2NSF environment consists of I2NSF
Events, I2NSF Records, and I2NSF Counters (see Section 4.1 for the
detailed definition). This information is to be delivered to the
NSF data collector.
* Notification: Unsolicited transmission of monitoring information.
* NSF Data Collector: An entity that collects NSF monitoring
information from NSFs, such as Security Controllers.
* Subscription: An agreement initialized by the NSF data collector
to receive monitoring information from an NSF. The method to
subscribe follows the method explained in [RFC5277].
This document follows the guidelines of [RFC8407], uses the common
YANG types defined in [RFC6991], and adopts the Network Management
Datastore Architecture (NMDA) [RFC8342]. The meaning of the symbols
in tree diagrams is defined in [RFC8340].
Jeong, et al. Expires 19 August 2022 [Page 4]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
3. Use Cases for NSF Monitoring Data
As mentioned earlier, monitoring plays a critical role in an overall
security framework. The monitoring of the NSF provides very valuable
information to an NSF data collector (e.g., Security Controller) in
maintaining the provisioned security posture. Besides this, there
are various other reasons to monitor the NSF as listed below:
* The I2NSF User that is the security administrator can configure a
policy that is triggered on a specific event occurring in the NSF
or the network [RFC8329]
[I-D.ietf-i2nsf-consumer-facing-interface-dm]. If an NSF data
collector detects the specified event, it configures additional
security functions as defined by policies.
* The events triggered by an NSF as a result of security policy
violation can be used by Security Information and Event Management
(SIEM) to detect any suspicious activity in a larger correlation
context.
* The information (i.e., events, records, and counters) from an NSF
can be used to build advanced analytics, such as behavior and
predictive models to improve security posture in large
deployments.
* The NSF data collector can use events from the NSF for achieving
high availability. It can take corrective actions such as
restarting a failed NSF and horizontally scaling up the NSF.
* The information (i.e., events, records, and counters) from the NSF
can aid in the root cause analysis of an operational issue, so it
can improve debugging.
* The records from the NSF can be used to build historical data for
operation and business reasons.
4. Classification of NSF Monitoring Data
In order to maintain a strong security posture, it is not only
necessary to configure an NSF's security policies but also to
continuously monitor the NSF by checking acquirable and observable
data. This enables security administrators to assess the state of
the networks in a timely fashion. It is not possible to block all
the internal and external threats based on static security posture.
A more practical approach is supported by enabling dynamic security
measures, for which continuous visibility is required. This document
defines a set of monitoring elements and their scopes that can be
acquired from an NSF and can be used as NSF monitoring data. In
Jeong, et al. Expires 19 August 2022 [Page 5]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
essence, this monitoring data can be leveraged to support constant
visibility on multiple levels of granularity and can be consumed by
the corresponding functions.
Three basic domains of monitoring data originating from a system
entity [RFC4949], i.e., an NSF, are discussed in this document.
* Retention and Emission from NSFs
* Notifications for Events and Records
* Push and Pull for the retrieval of monitoring data from NSFs
Every system entity creates information about some context with
defined I2NSF monitoring data, and so every entity can be an I2NSF
component. This information is intended to be consumed by other
I2NSF components, which deals with NSF monitoring data in an
automated fashion.
4.1. Retention and Emission from NSFs
A system entity (e.g., NSF) first retains I2NSF monitoring data
inside its own system before emitting the information to another
I2NSF component (e.g., NSF Data Collector). The I2NSF monitoring
information consist of I2NSF Events, I2NSF Records, and I2NSF
Counters as follows:
I2NSF Event: I2NSF Event is defined as an important occurrence at a
particular time, that is, a change in the system being managed or
a change in the environment of the system being managed. An I2NSF
Event requires immediate attention and should be notified as soon
as possible. When used in the context of an (imperative) I2NSF
Policy Rule, an I2NSF Event is used to determine whether the
Condition clause of that Policy Rule can be evaluated or not. The
Alarm Management Framework in [RFC3877] defines an event as
something that happens which may be of interest. Examples for an
event are a fault, a change in status, crossing a threshold, or an
external input to the system. In the I2NSF domain, I2NSF events
are created following the definition of an event in the Alarm
Management Framework.
I2NSF Record: A record is defined as an item of information that is
kept to be looked at and used in the future. Typically, records
are information generated by a system entity (e.g., NSF) that is
based on operational and informational data (i.e., various changes
in system characteristics), and are generated at particular
instants to be kept without any changes afterward. A set of
records has an ordering in time based on when they are generated.
Jeong, et al. Expires 19 August 2022 [Page 6]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
Unlike I2NSF Events, records do not require immediate attention
but may be useful for visibility and retroactive cyber forensics.
Records are typically stored in log-files or databases on a system
entity or NSF. The examples of records include as user
activities, device performance, and network status. They are
important for debugging, auditing, and security forensic of a
system entity or the network having the system entity.
I2NSF Counter: An I2NSF Counter is defined as a specific
representation of an information element whose value changes very
frequently. Prominent examples are network interface counters for
protocol data unit (PDU) amount, byte amount, drop counters, and
error counters. Counters are useful in debugging and visibility
into operational behavior of a system entity (e.g., NSF). When an
NSF data collector asks for the value of a counter, a system
entity MUST update the counter information and emit the latest
information to the NSF data collector.
Retention is defined as the storing of monitoring data in NSFs. The
retention of I2NSF monitoring information may be affected by the
importance of the data. The importance of the data could be context-
dependent, where it may not just be based on the type of data, but
may also depend on where it is deployed, e.g., a test lab and
testbed. The local policy and configuration will dictate the
policies and procedures to review, archive, or purge the collected
monitoring data.
Emission is defined as the delivery of monitoring data in NSFs to an
NSF data collector. The I2NSF monitoring information retained on a
system entity (e.g., NSF) may be delivered to a corresponding I2NSF
User via an NSF data collector. The information consists of the
aggregated records, typically in the form of log-files or databases.
For the NSF Monitoring Interface to deliver the information to the
NSF data collector, the NSF needs to accommodate standardized
delivery protocols, such as NETCONF [RFC6241] and RESTCONF [RFC8040].
The NSF data collector can forward the information to the I2NSF User
through standardized delivery protocols (e.g., RESTCONF and NETCONF).
The interface for this delivery is out of the scope of this document.
4.2. Notifications for Events and Records
A specific task of an I2NSF User is to process I2NSF Policy Rules.
The rules of a policy are composed of three clauses: Event,
Condition, and Action clauses. In consequence, an I2NSF Event is
specified to trigger the evaluation of the Condition clause of the
I2NSF Policy Rule. Such an I2NSF Event is defined as an important
occurrence at a particular time in the system being managed, and/or
in the environment of the system being managed whose concept aligns
Jeong, et al. Expires 19 August 2022 [Page 7]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
well with the generic definition of Event from [RFC3877].
Another role of the I2NSF Event is to trigger a notification for
monitoring the status of an NSF. A notification is defined in
[RFC3877] as an unsolicited transmission of management information.
System alarm (called alarm) is defined as a warning related to
service degradation in system hardware in Section 6.1. System event
(called alert) is defined as a warning about any changes of
configuration, any access violation, information about sessions and
traffic flows in Section 6.2. Both an alarm and an alert are I2NSF
Events that can be delivered as a notification. The model
illustrated in this document introduces a complementary type of
information that can be a conveyed notification.
In I2NSF monitoring, a notification is used to deliver either an
event and a record via the I2NSF Monitoring Interface. The
difference between the event and record is the timing by which the
notifications are emitted. An event is emitted as soon as it happens
in order to notify an NSF Data Collector of the problem that needs
immediate attention. A record is not emitted immediately to the NSF
Data Collector, and it can be emitted periodically to the NSF Data
Collector.
It is important to note that an NSF Data Collector as a consumer
(i.e., observer) of a notification assesses the importance of the
notification rather than an NSF as a producer. The producer can
include metadata in a notification that supports the observer in
assessing its importance (e.g., severity).
4.3. Push and Pull for the retrieval of monitoring data from NSFs
An important aspect of monitoring information is the freshness of the
information. From the perspective of security, it is important to
notice changes in the current status of the network. The I2NSF
Monitoring Interface provides the means of sending monitored
information from the NSFs to an NSF data collector in a timely
manner. Monitoring information can be acquired by a client (i.e.,
NSF data collector) from a server (i.e., NSF) using push or pull
methods.
The pull is a query-based method to obtain information from the NSF.
In this method, the NSF will remain passive until the information is
requested from the NSF data collector. Once a request is accepted
(with proper authentication), the NSF MUST update the information
before sending it to the NSF data collector.
Jeong, et al. Expires 19 August 2022 [Page 8]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
The push is a report-based method to obtain information from the NSF.
The report-based method ensures the information can be delivered
immediately without any requests. This method is used by the NSF to
actively provide information to the NSF data collector. To receive
the information, the NSF data collector subscribes to the NSF for the
information.
These acquisition methods are used for different types of monitoring
information. The information that has a high level of urgency (i.e.,
I2NSF Event) should be provided with the push method, while
information that has a lower level of urgency (i.e., I2NSF Record and
I2NSF Counter) can be provided with either the pull method or push
method.
5. Basic Information Model for Monitoring Data
As explained in the above section, there is a wealth of data
available from NSFs that can be monitored. Firstly, there must be
some general information with each monitoring message sent from an
NSF that helps a consumer to identify meta data with that message,
which are listed as below:
* message: The extra detailed description of NSF monitoring data to
give an NSF data collector the context information as meta data.
* vendor-name: The vendor's name of the NSF that generates the
message.
* device-model: The model of the device, can be represented by the
device model name or serial number. This field is used to
identify the model of the device that provides the security
service.
* software-version: The version of the software used to provide the
security service.
* nsf-name: The name or IP address of the NSF generating the
message. If the given nsf-name is not an IP address, the name can
be an arbitrary string including a FQDN (Fully Qualified Domain
Name). The name MUST be unique in the scope of management domain
for a different NSF to identify the NSF that generates the
message.
* severity: The severity level of the message. There are four
levels, i.e., critical, high, middle, and low.
Jeong, et al. Expires 19 August 2022 [Page 9]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
* timestamp: The time when the message was generated. For the
notification operations (i.e., System Alarms, System Events, NSF
Events, System Logs, and NSF Logs), this is represented by the
eventTime of NETCONF event notification [RFC5277] For other
operations (i.e., System Counter and NSF Counter), the timestamp
MUST be provided separately.
* language: describes the human language intended for the user, so
that it allows a user to differentiate the language that is used
in the notification. This field is mandatory only when the
implementation provides more than one human language for the
human-readable string fields.
6. Extended Information Model for Monitoring Data
The extended information model is the specific monitoring data that
covers the additional information associated with the detailed
information of status and performance of the network and the NSF over
the basic information model. The extended information combined with
the basic information creates the monitoring information (i.e., I2NSF
Event, Record, and Counter).
The extended monitoring information has settable characteristics for
data collection as follows:
* Acquisition method: The method to obtain the message. It can be a
"query" or a "subscription". A "query" is a request-based method
to acquire the solicited information. A "subscription" is a
report-based method that pushes information to the subscriber.
* Emission type: The cause type for the message to be emitted. It
can be "on-change", "periodic", or "on-request". An "on-change"
message is emitted when an important event happens in the NSF. A
"periodic" message is emitted at a certain time interval. An "on-
request" message is emitted when the information is requested.
The time to periodically emit the message is configurable.
* Dampening type: The type of message dampening to stop the rapid
transmission of messages. The dampening types are "on-repetition"
and "no-dampening". The "on-repetition" type limits the
transmitted "on-change" message to one message at a certain
interval (e.g., 1 second). This interval is defined as dampening-
period in [RFC8641]. The dampening-period is configurable. The
"no-dampening" type does not limit the transmission for the
messages of the same type. In short, "on-repetition" means that
the dampening is active and "no-dampening" is inactive.
Activating the dampening for an "on-change" type of message is
RECOMMENDED to reduce the number of messages generated.
Jeong, et al. Expires 19 August 2022 [Page 10]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
6.1. System Alarms
System alarms have the following characteristics:
* acquisition-method: subscription
* emission-type: on-change
* dampening-type: on-repetition or no-dampening
6.1.1. Memory Alarm
The memory is the hardware to store information temporarily or for a
short period, i.e., Random Access Memory (RAM). The memory-alarm is
emitted when the RAM usage exceeds the threshold. The following
information should be included in a Memory Alarm:
* event-name: memory-alarm.
* usage: specifies the amount of memory used.
* threshold: The threshold triggering the alarm
* severity: The severity level of the message. There are four
levels, i.e., critical, high, middle, and low.
* message: Simple information as a human readable text string such
as "The memory usage exceeded the threshold" or with extra
information.
6.1.2. CPU Alarm
CPU is the Central Processing Unit that executes basic operations of
the system. The cpu-alarm is emitted when the CPU usage exceeds the
threshold. The following information should be included in a CPU
Alarm:
* event-name: cpu-alarm.
* usage: Specifies the CPU utilization.
* threshold: The threshold triggering the event.
* severity: The severity level of the message. There are four
levels, i.e., critical, high, middle, and low.
Jeong, et al. Expires 19 August 2022 [Page 11]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
* message: Simple information as a human readable text string such
as "The CPU usage exceeded the threshold" or with extra
information.
6.1.3. Disk Alarm
Disk is the hardware to store information for a long time, i.e., Hard
Disk or Solid-State Drive. The disk-alarm is emitted when the Disk
usage exceeds the threshold. The following information should be
included in a Disk Alarm:
* event-name: disk-alarm.
* usage: Specifies the size of disk space used.
* threshold: The threshold triggering the event.
* severity: The severity level of the message. There are four
levels, i.e., critical, high, middle, and low.
* message: Simple information as a human readable text string such
as "The disk usage exceeded the threshold" or with extra
information.
6.1.4. Hardware Alarm
The hardware-alarm is emitted when a hardware, e.g., CPU, memory,
disk, or interface, problem is detected. The following information
should be included in a Hardware Alarm:
* event-name: hardware-alarm.
* component-name: It indicates the hardware component responsible
for generating this alarm.
* severity: The severity level of the message. There are four
levels, i.e., critical, high, middle, and low.
* message: Simple information as a human readable text string such
as "The hardware component has failed or degraded" or with extra
information.
6.1.5. Interface Alarm
Interface is the network interface for connecting a device with the
network. The interface-alarm is emitted when the state of the
interface is changed. The following information should be included
in an Interface Alarm:
Jeong, et al. Expires 19 August 2022 [Page 12]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
* event-name: interface-alarm.
* interface-name: The name of the interface.
* interface-state: The status of the interface, i.e., down, up (not
congested), congested (up but congested), testing, unknown,
dormant, not-present, and lower-layer-down.
* severity: The severity level of the message. There are total
levels, i.e., critical, high, middle, and low.
* message: Simple information as a human readable text string such
as "The interface is 'interface-state'" or with extra information.
6.2. System Events
System events (as alerts) have the following characteristics:
* acquisition-method: subscription
* emission-type: on-change
* dampening-type: on-repetition or no-dampening
6.2.1. Access Violation
The access-violation system event is an event when a user tries to
access (read, write, create, or delete) any information or execute
commands above their privilege. The following information should be
included in this event:
* event-name: access-violation.
* identity: The information to identify the attempted access
violation. The minimum information (extensible) that should be
included:
1. user: The unique username that attempted access violation.
2. group: Group(s) to which a user belongs. A user can belong to
multiple groups.
3. ip-address: The IP address of the user that triggered the
event.
4. l4-port-number: The transport layer port number used by the
user.
Jeong, et al. Expires 19 August 2022 [Page 13]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
* authentication: The method to verify the valid user, i.e., pre-
configured-key and certificate-authority.
* message: The message as a human readable text string to give the
context of the event, such as "Access is denied".
6.2.2. Configuration Change
A configuration change is a system event when a new configuration is
added or an existing configuration is modified. The following
information should be included in this event:
* event-name: configuration-change.
* identity: The information to identify the user that updated the
configuration. The minimum information (extensible) that should
be included:
1. user: The unique username that changes the configuration.
2. group: Group(s) to which a user belongs. A user can belong to
multiple groups.
3. ip-address: The IP address of the user that triggered the
event.
4. l4-port-number: The transport layer port number used by the
user.
* authentication: The method to verify the valid user, i.e., pre-
configured-key and certificate-authority.
* message: The message as a human readable text string to give the
context of the event, such as "Configuration is modified", "New
configuration is added", or "A configuration has been removed".
* changes: Describes the modification that was made to the
configuration. The minimum information that must be provided is
the name of the policy that has been altered (added, modified, or
removed). Other detailed information about the configuration
changes is up to the implementation.
Jeong, et al. Expires 19 August 2022 [Page 14]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
6.2.3. Session Table Event
A session is defined as a connection (i.e., traffic flow) of a data
plane (e.g., TCP, UDP, and SCTP). Session Table Event is the event
triggered by the session table of an NSF. A session table holds the
information of the currently active sessions. The following
information should be included in a Session Table Event:
* event-name: detection-session-table.
* current-session: The number of concurrent sessions.
* maximum-session: The maximum number of sessions that the session
table can support.
* threshold: The threshold triggering the event.
* message: The message as a human readable text string to give the
context of the event, such as "The number of sessions exceeded the
table threshold".
6.2.4. Traffic Flows
Traffic flows need to be monitored because they might be used for
security attacks to the network. The following information should be
included in this event:
* event-name: traffic-flows.
* interface-name: The mnemonic name of the network interface
* interface-type: The type of a network interface such as an ingress
or egress interface.
* src-mac: The source MAC address of the traffic flow.
* dst-mac: The destination MAC address of the traffic flow.
* src-ip: The source IPv4 or IPv6 address of the traffic flow.
* dst-ip: The destination IPv4 or IPv6 address of the traffic flow.
* src-port: The transport layer source port number of the traffic
flow.
* dst-port: The transport layer destination port number of the
traffic flow.
Jeong, et al. Expires 19 August 2022 [Page 15]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
* protocol: The protocol of the traffic flow.
* arrival-rate: Arrival rate of packets of the traffic flow in
packet per second calculated from the beginning of the flow.
* arrival-throughput: Arrival rate of packets of the traffic flow in
bytes per second calculated from the beginning of the flow.
Note that the NSF Monitoring Interface data model is focused on a
generic method to collect the monitoring information of systems and
NSFs including traffic flows related to security attacks and system
resource usages. On the other hand, IPFIX [RFC7011] is a standard
method to collect general information on traffic flows rather than
security.
6.3. NSF Events
The NSF events provide the event that is detected by a specific NSF
that supported a certain capability. This section only discusses the
monitoring data for the advanced NSFs discussed in
[I-D.ietf-i2nsf-capability-data-model]. The NSF events information
can be extended to support other types of NSF. NSF events have the
following characteristics:
* acquisition-method: subscription
* emission-type: on-change
* dampening-type: on-repetition or no-dampening
6.3.1. DDoS Detection
The following information should be included in a Denial-of-Service
(DoS) or Distributed Denial-of-Service (DDoS) Event:
* event-name: detection-ddos.
* attack-type: The type of DoS or DDoS Attack, i.e., SYN flood, ACK
flood, SYN-ACK flood, FIN/RST flood, TCP Connection flood, UDP
flood, ICMP flood, HTTPS flood, HTTP flood, DNS query flood, DNS
reply flood, SIP flood, SSL flood, and NTP amplification flood.
This can be extended with additional types of DoS or DDoS attack.
* attack-src-ip: The IP address of the source of the DDoS attack.
* attack-dst-ip: The network prefix with a network mask (for IPv4)
or prefix length (for IPv6) of a victim under DDoS attack.
Jeong, et al. Expires 19 August 2022 [Page 16]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
* dst-port: The port number that the attack traffic aims at.
* start-time: The time stamp indicating when the attack started.
* end-time: The time stamp indicating when the attack ended. If the
attack is still ongoing when sending out the notification, this
field can be empty.
* attack-rate: The packets per second of attack traffic.
* attack-throughput: The bytes per second of attack traffic.
* rule-name: The name of the I2NSF Policy Rule being triggered.
Note that rule-name is used to match a detected NSF event with a
policy rule in [I-D.ietf-i2nsf-nsf-facing-interface-dm].
6.3.2. Virus Event
This information is used when a virus is detected within a traffic
flow or inside a host. Note that "malware" is a more generic word
for malicious software, including virus and worm. In the document,
"virus" is used to represent "malware" such that they are
interchangeable. The following information should be included in a
Virus Event:
* event-name: detection-virus.
* virus-name: Name of the virus.
* virus-type: Type of the virus. e.g., trojan, worm, macro virus
type.
* The following information is used only when the virus is detected
within the traffic flow and not yet attacking the host:
- dst-ip: The destination IP address of the flow where the virus
is found.
- src-ip: The source IP address of the flow where the virus is
found.
- src-port: The source port of the flow where the virus is found.
- dst-port: The destination port of the flow where the virus is
found.
* The following information is used only when the virus is detected
within a host system:
Jeong, et al. Expires 19 August 2022 [Page 17]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
- host: The name or IP address of the host/device that is
infected by the virus. If the given name is not an IP address,
the name can be an arbitrary string including a FQDN (Fully
Qualified Domain Name). The name MUST be unique in the scope
of management domain for identifying the device that has been
infected with a virus.
- os: The operating system of the host that has the virus.
- file-type: The type of the file where the virus is hidden.
- file-name: The name of the file where the virus is hidden.
* rule-name: The name of the rule being triggered.
Note "host" is used only when the virus is detected within a host
itself. Thus, the traffic flow information such as the source and
destination IP addresses is not important, so the elements of the
traffic flow (i.e., dst-ip, src-ip, src-port, and dst-port) are not
specified above. On the other hand, when the virus is detected
within a traffic flow and not yet attacking a host, the element of
"host" is not specified above.
6.3.3. Intrusion Event
The following information should be included in an Intrusion Event:
* event-name: detection-intrusion.
* attack-type: Attack type, e.g., brutal force or buffer overflow.
* src-ip: The source IP address of the flow.
* dst-ip: The destination IP address of the flow.
* src-port:The source port number of the flow.
* dst-port: The destination port number of the flow
* protocol: The employed transport layer protocol. e.g., TCP or UDP.
* app: The employed application layer protocol. e.g., HTTP or FTP.
* rule-name: The name of the I2NSF Policy Rule being triggered.
Jeong, et al. Expires 19 August 2022 [Page 18]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
6.3.4. Web Attack Event
The following information should be included in a Web Attack Alarm:
* event-name: detection-web-attack.
* attack-type: Concrete web attack type. e.g., SQL injection,
command injection, XSS, or CSRF.
* src-ip: The source IP address of the packet.
* dst-ip: The destination IP address of the packet.
* src-port: The source port number of the packet.
* dst-port: The destination port number of the packet.
* req-method: The HTTP method of the request. For instance, "PUT"
and "GET" in HTTP.
* req-target: The HTTP Request Target.
* response-code: The HTTP Response status code.
* req-user-agent: The HTTP User-Agent header field of the request.
* cookies: The HTTP Cookie header field of the request from the user
agent.
* req-host: The HTTP Host header field of the request.
* filtering-type: URL filtering type. e.g., deny-list, allow-list,
and unknown.
* rule-name: The name of the I2NSF Policy Rule being triggered.
6.3.5. VoIP/VoCN Event
The following information should be included in a VoIP (Voice over
Internet Protocol) and VoCN (Voice over Cellular Network, such as
Voice over LTE or 5G) Event:
* event-name: detection-voip-vocn
* source-voice-id: The detected source voice Call ID for VoIP and
VoCN that violates the policy.
Jeong, et al. Expires 19 August 2022 [Page 19]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
* destination-voice-id: The destination voice Call ID for VoIP and
VoCN that violates the policy.
* user-agent: The user agent for VoIP and VoCN that violates the
policy.
* src-ip: The source IP address of the VoIP/VoCN.
* dst-ip: The destination IP address of the VoIP/VoCN.
* src-port: The source port number of the VoIP/VoCN.
* dst-port: The destination port number of VoIP/VoCN.
* rule-name: The name of the I2NSF Policy Rule being triggered.
6.4. System Logs
System log is a record that is used to monitor the activity of the
user on the NSF and the status of the NSF. System logs have the
following characteristics:
* acquisition-method: subscription or query
* emission-type: on-change, periodic, or on-request
* dampening-type: on-repetition or no-dampening
6.4.1. Access Log
Access logs record administrators' login, logout, and operations on a
device. By analyzing them, security vulnerabilities can be
identified. The following information should be included in an
operation report:
* identity: The information to identify the user. The minimum
information (extensible) that should be included:
1. user: The unique username that attempted access violation.
2. group: Group(s) to which a user belongs. A user can belong to
multiple groups.
3. ip-address: The IP address of the user that triggered the
event.
4. l4-port-number: The transport layer port number used by the
user.
Jeong, et al. Expires 19 August 2022 [Page 20]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
* authentication: The method to verify the valid user, i.e., pre-
configured-key and certificate-authority.
* operation-type: The operation type that the administrator
executed, e.g., login, logout, configuration, and other.
* input: The operation performed by a user after login. The
operation is a command given by a user.
* output: The result after executing the input.
6.4.2. Resource Utilization Log
Running reports record the device system's running status, which is
useful for device monitoring. The following information should be
included in running report:
* system-status: The current system's running status.
* cpu-usage: Specifies the aggregated CPU usage.
* memory-usage: Specifies the memory usage.
* disk-id: Specifies the disk ID to identify the storage disk.
* disk-usage: Specifies the disk usage of disk-id.
* disk-space-left: Specifies the available disk space left of disk-
id.
* session-number: Specifies total concurrent sessions.
* process-number: Specifies total number of systems processes.
* interface-id: Specifies the interface ID to identify the network
interface.
* in-traffic-rate: The total inbound data plane traffic rate in
packets per second.
* out-traffic-rate: The total outbound data plane traffic rate in
packets per second.
* in-traffic-throughput: The total inbound data plane traffic
throughput in bytes per second.
* out-traffic-throughput: The total outbound data plane traffic
throughput in bytes per second.
Jeong, et al. Expires 19 August 2022 [Page 21]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
Note that "traffic" includes only the data plane since the monitoring
interface focuses on the monitoring of traffic flows for
applications, rather than the control plane. In the document,
"packet" includes a layer-2 frame, so "packet" and "frame" are
interchangeable.
6.4.3. User Activity Log
User activity logs provide visibility into users' online records
(such as login time, online/lockout duration, and login IP addresses)
and the actions that users perform. User activity reports are
helpful to identify exceptions during a user's login and network
access activities. This information should be included in a user's
activity report:
* identity: The information to identify the user. The minimum
information (extensible) that should be included is as follows:
1. user: The unique username that attempted access violation.
2. group: Group(s) to which a user belongs. A user can belong to
multiple groups.
3. ip-address: The IP address of the user that triggered the
event.
4. l4-port-number: The transport layer port number used by the
user.
* authentication: The method to verify the valid user, i.e., pre-
configured-key and certificate-authority.
* online-duration: The duration of a user's activeness (stays in
login) during a session.
* logout-duration: The duration of a user's inactiveness (not in
login) from the last session.
* additional-info: Additional Information for login:
1. type: User activities. e.g., Successful User Login, Failed
Login attempts, User Logout, Successful User Password Change,
Failed User Password Change, User Lockout, and User Unlocking.
2. cause: Cause of a failed user activity.
Jeong, et al. Expires 19 August 2022 [Page 22]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
6.5. NSF Logs
NSF logs have the folowing characteristics:
* acquisition-method: subscription or query
* emission-type: on-change or on-request
* dampening-type: on-repetition or no-dampening
6.5.1. Deep Packet Inspection Log
Deep Packet Inspection (DPI) Logs provide statistics of transit
traffic at an NSF such that the traffic includes uploaded and
downloaded files/data, sent/received emails, and blocking/alert
records on websites. It is helpful to learn risky user behaviors and
why access to some URLs is blocked or allowed with an alert record.
* attack-type: DPI action types. e.g., File Blocking, Data
Filtering, and Application Behavior Control.
* src-user: The I2NSF User's name who generates the policy.
* policy-name: Security policy name that traffic matches.
* action: Action defined in the file blocking rule, data filtering
rule, or application behavior control rule that traffic matches.
6.6. System Counter
System counter has the following characteristics:
* acquisition-method: subscription or query
* emission-type: periodic or on-request
* dampening-type: no-dampening
6.6.1. Interface Counter
Interface counters provide visibility into traffic into and out of an
NSF, and bandwidth usage. The statistics of the interface counters
should be computed from the start of the service up to the last
measure time instant. When the service is reset, the computation of
statistics per counter should use the reset time instant as the start
of the service for measurement.
* interface-name: Network interface name configured in NSF.
Jeong, et al. Expires 19 August 2022 [Page 23]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
* protocol: The type of network protocol (e.g., IPv4, IPv6, TCP, and
UDP). If this field is empty, then the counter is used for all
protocols.
* in-total-traffic-pkts: Total inbound packets.
* out-total-traffic-pkts: Total outbound packets.
* in-total-traffic-bytes: Total inbound bytes.
* out-total-traffic-bytes: Total outbound bytes.
* in-drop-traffic-pkts: Total inbound drop packets caused by a
policy or hardware/resource error.
* out-drop-traffic-pkts: Total outbound drop packets caused by a
policy or hardware/resource error.
* in-drop-traffic-bytes: Total inbound drop bytes caused by a policy
or hardware/resource error.
* out-drop-traffic-bytes: Total outbound drop bytes caused by a
policy or hardware/resource error.
* in-traffic-average-rate: Inbound traffic average rate in packets
per second.
* in-traffic-peak-rate: Inbound traffic peak rate in packets per
second.
* in-traffic-average-throughput: Inbound traffic average throughput
in bytes per second.
* in-traffic-peak-throughput: Inbound traffic peak throughput in
bytes per second.
* out-traffic-average-rate: Outbound traffic average rate in packets
per second.
* out-traffic-peak-rate: Outbound traffic peak rate in packets per
second.
* out-traffic-average-throughput: Outbound traffic average
throughput in bytes per second.
* out-traffic-peak-throughput: Outbound traffic peak throughput in
bytes per second.
Jeong, et al. Expires 19 August 2022 [Page 24]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
* discontinuity-time: The time of the most recent occasion at which
any one or more of the counters suffered a discontinuity. If no
such discontinuities have occurred since the last re-
initialization of the local management subsystem, then this node
contains the time the local management subsystem was re-
initialized.
6.7. NSF Counters
NSF counters have the following characteristics:
* acquisition-method: subscription or query
* emission-type: periodic or on-request
* dampening-type: no-dampening
6.7.1. Firewall Counter
Firewall counters provide visibility into traffic signatures,
bandwidth usage, and how the configured security and bandwidth
policies have been applied.
* src-ip: Source IP address of traffic.
* src-user: The I2NSF User's name who generates the policy.
* dst-ip: Destination IP address of traffic.
* src-port: Source port of traffic.
* dst-port: Destination port of traffic.
* protocol: Protocol type of traffic.
* app: Application type of traffic.
* policy-id: Security policy id that traffic matches.
* policy-name: Security policy name that traffic matches.
* in-interface: Inbound interface of traffic.
* out-interface: Outbound interface of traffic.
* total-traffic: Total traffic volume.
Jeong, et al. Expires 19 August 2022 [Page 25]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
* in-traffic-average-rate: Inbound traffic average rate in packets
per second.
* in-traffic-peak-rate: Inbound traffic peak rate in packets per
second.
* in-traffic-average-throughput: Inbound traffic average throughput
in bytes per second.
* in-traffic-peak-throughput: Inbound traffic peak throughput in
bytes per second.
* out-traffic-average-rate: Outbound traffic average rate in packets
per second.
* out-traffic-peak-rate: Outbound traffic peak rate in packets per
second.
* out-traffic-average-throughput: Outbound traffic average
throughput in bytes per second.
* out-traffic-peak-throughput: Outbound traffic peak throughput in
bytes per second.
* discontinuity-time: The time on the most recent occasion at which
any one or more of the counters suffered a discontinuity. If no
such discontinuities have occurred since the last re-
initialization of the local management subsystem, then this node
contains the time the local management subsystem was re-
initialized.
6.7.2. Policy Hit Counter
Policy hit counters record the security policy that traffic matches
and its hit count. That is, when a packet actually matches a policy,
it should be added to the statistics of a "policy hit counter" of the
policy. The "policy hit counter" provides the "policy-name" that
matches the policy's name in the NSF-Facing Interface YANG data model
[I-D.ietf-i2nsf-nsf-facing-interface-dm]. It can check if policy
configurations are correct or not.
* src-ip: Source IP address of traffic.
* src-user: The I2NSF User's name who generates the policy.
* dst-ip: Destination IP address of traffic.
* src-port: Source port of traffic.
Jeong, et al. Expires 19 August 2022 [Page 26]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
* dst-port: Destination port of traffic.
* protocol: Protocol type of traffic.
* app: Application type of traffic.
* policy-id: Security policy id that traffic matches.
* policy-name: Security policy name that traffic matches.
* hit-times: The number of times that the security policy matches
the specified traffic.
* discontinuity-time: The time on the most recent occasion at which
any one or more of the counters suffered a discontinuity. If no
such discontinuities have occurred since the last re-
initialization of the local management subsystem, then this node
contains the time the local management subsystem was re-
initialized.
7. YANG Tree Structure of NSF Monitoring YANG Module
The tree structure of the NSF monitoring YANG module is provided
below:
module: ietf-i2nsf-nsf-monitoring
+--ro i2nsf-counters
| +--ro language? string
| +--ro system-interface* [interface-name]
| | +--ro acquisition-method? identityref
| | +--ro emission-type? identityref
| | +--ro dampening-type? identityref
| | +--ro interface-name if:interface-ref
| | +--ro protocol? identityref
| | +--ro in-total-traffic-pkts? yang:counter64
| | +--ro out-total-traffic-pkts? yang:counter64
| | +--ro in-total-traffic-bytes? uint64
| | +--ro out-total-traffic-bytes? uint64
| | +--ro in-drop-traffic-pkts? yang:counter64
| | +--ro out-drop-traffic-pkts? yang:counter64
| | +--ro in-drop-traffic-bytes? uint64
| | +--ro out-drop-traffic-bytes? uint64
| | +--ro discontinuity-time yang:date-and-time
| | +--ro total-traffic? yang:counter64
| | +--ro in-traffic-average-rate? uint32
| | +--ro in-traffic-peak-rate? uint32
| | +--ro in-traffic-average-throughput? uint64
| | +--ro in-traffic-peak-throughput? uint64
Jeong, et al. Expires 19 August 2022 [Page 27]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
| | +--ro out-traffic-average-rate? uint32
| | +--ro out-traffic-peak-rate? uint32
| | +--ro out-traffic-average-throughput? uint64
| | +--ro out-traffic-peak-throughput? uint64
| | +--ro message? string
| | +--ro vendor-name? string
| | +--ro nsf-name? union
| | +--ro severity? severity
| | +--ro timestamp? yang:date-and-time
| +--ro nsf-firewall* [policy-name]
| | +--ro acquisition-method? identityref
| | +--ro emission-type? identityref
| | +--ro dampening-type? identityref
| | +--ro policy-name -> /nsfintf:i2nsf-security-policy/name
| | +--ro src-user? string
| | +--ro discontinuity-time yang:date-and-time
| | +--ro total-traffic? yang:counter64
| | +--ro in-traffic-average-rate? uint32
| | +--ro in-traffic-peak-rate? uint32
| | +--ro in-traffic-average-throughput? uint64
| | +--ro in-traffic-peak-throughput? uint64
| | +--ro out-traffic-average-rate? uint32
| | +--ro out-traffic-peak-rate? uint32
| | +--ro out-traffic-average-throughput? uint64
| | +--ro out-traffic-peak-throughput? uint64
| | +--ro message? string
| | +--ro vendor-name? string
| | +--ro nsf-name? union
| | +--ro severity? severity
| | +--ro timestamp? yang:date-and-time
| +--ro nsf-policy-hits* [policy-name]
| +--ro acquisition-method? identityref
| +--ro emission-type? identityref
| +--ro dampening-type? identityref
| +--ro policy-name -> /nsfintf:i2nsf-security-policy/name
| +--ro src-user? string
| +--ro message? string
| +--ro vendor-name? string
| +--ro nsf-name? union
| +--ro severity? severity
| +--ro discontinuity-time yang:date-and-time
| +--ro hit-times? yang:counter64
| +--ro timestamp? yang:date-and-time
+--rw i2nsf-monitoring-configuration
+--rw i2nsf-system-detection-alarm
| +--rw enabled? boolean
| +--rw system-alarm* [alarm-type]
| +--rw alarm-type enumeration
Jeong, et al. Expires 19 August 2022 [Page 28]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
| +--rw threshold? uint8
| +--rw dampening-period? uint32
+--rw i2nsf-system-detection-event
| +--rw enabled? boolean
| +--rw dampening-period? uint32
+--rw i2nsf-traffic-flows
| +--rw dampening-period? uint32
| +--rw enabled? boolean
+--rw i2nsf-nsf-detection-ddos {i2nsf-nsf-detection-ddos}?
| +--rw enabled? boolean
| +--rw dampening-period? uint32
+--rw i2nsf-nsf-detection-session-table
| +--rw enabled? boolean
| +--rw dampening-period? uint32
+--rw i2nsf-nsf-detection-intrusion
{i2nsf-nsf-detection-intrusion}?
| +--rw enabled? boolean
| +--rw dampening-period? uint32
+--rw i2nsf-nsf-detection-web-attack
{i2nsf-nsf-detection-web-attack}?
| +--rw enabled? boolean
| +--rw dampening-period? uint32
+--rw i2nsf-nsf-system-access-log
| +--rw enabled? boolean
| +--rw dampening-period? uint32
+--rw i2nsf-system-res-util-log
| +--rw enabled? boolean
| +--rw dampening-period? uint32
+--rw i2nsf-system-user-activity-log
| +--rw enabled? boolean
| +--rw dampening-period? uint32
+--rw i2nsf-nsf-log-dpi {i2nsf-nsf-log-dpi}?
| +--rw enabled? boolean
| +--rw dampening-period? uint32
+--rw i2nsf-counter
+--rw period? uint16
notifications:
+---n i2nsf-event
| +--ro language? string
| +--ro (sub-event-type)?
| +--:(i2nsf-system-detection-alarm)
| | +--ro i2nsf-system-detection-alarm
| | +--ro alarm-category? identityref
| | +--ro component-name? string
| | +--ro interface-name? if:interface-ref
| | +--ro interface-state? enumeration
| | +--ro acquisition-method? identityref
Jeong, et al. Expires 19 August 2022 [Page 29]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
| | +--ro emission-type? identityref
| | +--ro dampening-type? identityref
| | +--ro usage? uint8
| | +--ro threshold? uint8
| | +--ro message? string
| | +--ro vendor-name? string
| | +--ro nsf-name? union
| | +--ro severity? severity
| +--:(i2nsf-system-detection-event)
| | +--ro i2nsf-system-detection-event
| | +--ro event-category? identityref
| | +--ro acquisition-method? identityref
| | +--ro emission-type? identityref
| | +--ro dampening-type? identityref
| | +--ro user string
| | +--ro group* string
| | +--ro ip-address inet:ip-address-no-zone
| | +--ro l4-port-number inet:port-number
| | +--ro authentication? identityref
| | +--ro message? string
| | +--ro vendor-name? string
| | +--ro nsf-name? union
| | +--ro severity? severity
| | +--ro changes* [policy-name]
| | +--ro policy-name
-> /nsfintf:i2nsf-security-policy/name
| +--:(i2nsf-traffic-flows)
| | +--ro i2nsf-traffic-flows
| | +--ro interface-name? if:interface-ref
| | +--ro interface-type? enumeration
| | +--ro src-mac? yang:mac-address
| | +--ro dst-mac? yang:mac-address
| | +--ro src-ip? inet:ip-address-no-zone
| | +--ro dst-ip? inet:ip-address-no-zone
| | +--ro protocol? identityref
| | +--ro src-port? inet:port-number
| | +--ro dst-port? inet:port-number
| | +--ro arrival-rate? uint32
| | +--ro arrival-throughput? uint32
| | +--ro acquisition-method? identityref
| | +--ro emission-type? identityref
| | +--ro dampening-type? identityref
| | +--ro message? string
| | +--ro vendor-name? string
| | +--ro nsf-name? union
| | +--ro severity? severity
| +--:(i2nsf-nsf-detection-session-table)
| +--ro i2nsf-nsf-detection-session-table
Jeong, et al. Expires 19 August 2022 [Page 30]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
| +--ro current-session? uint32
| +--ro maximum-session? uint32
| +--ro threshold? uint32
| +--ro message? string
| +--ro vendor-name? string
| +--ro nsf-name? union
| +--ro severity? severity
+---n i2nsf-log
| +--ro language? string
| +--ro (sub-logs-type)?
| +--:(i2nsf-nsf-system-access-log)
| | +--ro i2nsf-nsf-system-access-log
| | +--ro user string
| | +--ro group* string
| | +--ro ip-address inet:ip-address-no-zone
| | +--ro l4-port-number inet:port-number
| | +--ro authentication? identityref
| | +--ro operation-type? operation-type
| | +--ro input? string
| | +--ro output? string
| | +--ro acquisition-method? identityref
| | +--ro emission-type? identityref
| | +--ro dampening-type? identityref
| | +--ro message? string
| | +--ro vendor-name? string
| | +--ro nsf-name? union
| | +--ro severity? severity
| +--:(i2nsf-system-res-util-log)
| | +--ro i2nsf-system-res-util-log
| | +--ro system-status? enumeration
| | +--ro cpu-usage? uint8
| | +--ro memory-usage? uint8
| | +--ro disk* [disk-id]
| | | +--ro disk-id string
| | | +--ro disk-usage? uint8
| | | +--ro disk-space-left? uint8
| | +--ro session-num? uint32
| | +--ro process-num? uint32
| | +--ro interface* [interface-id]
| | | +--ro interface-id string
| | | +--ro in-traffic-rate? uint32
| | | +--ro out-traffic-rate? uint32
| | | +--ro in-traffic-throughput? uint64
| | | +--ro out-traffic-throughput? uint64
| | +--ro acquisition-method? identityref
| | +--ro emission-type? identityref
| | +--ro dampening-type? identityref
| | +--ro message? string
Jeong, et al. Expires 19 August 2022 [Page 31]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
| | +--ro vendor-name? string
| | +--ro nsf-name? union
| | +--ro severity? severity
| +--:(i2nsf-system-user-activity-log)
| | +--ro i2nsf-system-user-activity-log
| | +--ro acquisition-method? identityref
| | +--ro emission-type? identityref
| | +--ro dampening-type? identityref
| | +--ro user string
| | +--ro group* string
| | +--ro ip-address inet:ip-address-no-zone
| | +--ro l4-port-number inet:port-number
| | +--ro authentication? identityref
| | +--ro message? string
| | +--ro vendor-name? string
| | +--ro nsf-name? union
| | +--ro severity? severity
| | +--ro online-duration? uint32
| | +--ro logout-duration? uint32
| | +--ro additional-info? enumeration
| +--:(i2nsf-nsf-log-dpi) {i2nsf-nsf-log-dpi}?
| +--ro i2nsf-nsf-log-dpi
| +--ro attack-type? dpi-type
| +--ro acquisition-method? identityref
| +--ro emission-type? identityref
| +--ro dampening-type? identityref
| +--ro policy-name
-> /nsfintf:i2nsf-security-policy/name
| +--ro src-user? string
| +--ro message? string
| +--ro vendor-name? string
| +--ro nsf-name? union
| +--ro severity? severity
+---n i2nsf-nsf-event
+--ro language? string
+--ro (sub-event-type)?
+--:(i2nsf-nsf-detection-ddos) {i2nsf-nsf-detection-ddos}?
| +--ro i2nsf-nsf-detection-ddos
| +--ro attack-type? identityref
| +--ro start-time yang:date-and-time
| +--ro end-time? yang:date-and-time
| +--ro attack-src-ip* inet:ip-address-no-zone
| +--ro attack-dst-ip* inet:ip-address-no-zone
| +--ro attack-src-port* inet:port-number
| +--ro attack-dst-port* inet:port-number
| +--ro rule-name
-> /nsfintf:i2nsf-security-policy/rules/name
| +--ro attack-rate? uint32
Jeong, et al. Expires 19 August 2022 [Page 32]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
| +--ro attack-throughput? uint64
| +--ro action* log-action
| +--ro acquisition-method? identityref
| +--ro emission-type? identityref
| +--ro dampening-type? identityref
| +--ro message? string
| +--ro vendor-name? string
| +--ro nsf-name? union
| +--ro severity? severity
+--:(i2nsf-nsf-detection-virus)
{i2nsf-nsf-detection-virus}?
| +--ro i2nsf-nsf-detection-virus
| +--ro dst-ip? inet:ip-address-no-zone
| +--ro dst-port? inet:port-number
| +--ro rule-name
-> /nsfintf:i2nsf-security-policy/rules/name
| +--ro src-ip? inet:ip-address-no-zone
| +--ro src-port? inet:port-number
| +--ro virus-name? string
| +--ro virus-type? identityref
| +--ro host? union
| +--ro file-type? string
| +--ro file-name? string
| +--ro os? string
| +--ro action* log-action
| +--ro acquisition-method? identityref
| +--ro emission-type? identityref
| +--ro dampening-type? identityref
| +--ro message? string
| +--ro vendor-name? string
| +--ro nsf-name? union
| +--ro severity? severity
+--:(i2nsf-nsf-detection-intrusion)
{i2nsf-nsf-detection-intrusion}?
| +--ro i2nsf-nsf-detection-intrusion
| +--ro dst-ip? inet:ip-address-no-zone
| +--ro dst-port? inet:port-number
| +--ro rule-name
-> /nsfintf:i2nsf-security-policy/rules/name
| +--ro src-ip? inet:ip-address-no-zone
| +--ro src-port? inet:port-number
| +--ro protocol? identityref
| +--ro app? identityref
| +--ro attack-type? identityref
| +--ro action* log-action
| +--ro attack-rate? uint32
| +--ro attack-throughput? uint64
| +--ro acquisition-method? identityref
Jeong, et al. Expires 19 August 2022 [Page 33]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
| +--ro emission-type? identityref
| +--ro dampening-type? identityref
| +--ro message? string
| +--ro vendor-name? string
| +--ro nsf-name? union
| +--ro severity? severity
+--:(i2nsf-nsf-detection-web-attack)
{i2nsf-nsf-detection-web-attack}?
| +--ro i2nsf-nsf-detection-web-attack
| +--ro dst-ip? inet:ip-address-no-zone
| +--ro dst-port? inet:port-number
| +--ro rule-name
-> /nsfintf:i2nsf-security-policy/rules/name
| +--ro src-ip? inet:ip-address-no-zone
| +--ro src-port? inet:port-number
| +--ro attack-type? identityref
| +--ro req-method? identityref
| +--ro req-target? string
| +--ro filtering-type* identityref
| +--ro req-user-agent? string
| +--ro cookie? string
| +--ro req-host? string
| +--ro response-code? string
| +--ro acquisition-method? identityref
| +--ro emission-type? identityref
| +--ro dampening-type? identityref
| +--ro action* log-action
| +--ro message? string
| +--ro vendor-name? string
| +--ro nsf-name? union
| +--ro severity? severity
+--:(i2nsf-nsf-detection-voip-vocn)
{i2nsf-nsf-detection-voip-vocn}?
+--ro i2nsf-nsf-detection-voip-vocn
+--ro dst-ip? inet:ip-address-no-zone
+--ro dst-port? inet:port-number
+--ro rule-name
-> /nsfintf:i2nsf-security-policy/rules/name
+--ro src-ip? inet:ip-address-no-zone
+--ro src-port? inet:port-number
+--ro source-voice-id* string
+--ro destination-voice-id* string
+--ro user-agent* string
+--ro message? string
+--ro vendor-name? string
+--ro nsf-name? union
+--ro severity? severity
Jeong, et al. Expires 19 August 2022 [Page 34]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
Figure 1: NSF Monitoring YANG Module Tree
8. YANG Data Model of NSF Monitoring YANG Module
This section describes a YANG module of I2NSF NSF Monitoring. The
data model provided in this document uses identities to be used to
get information of the monitored of an NSF's monitoring data. Every
identity used in the document gives information or status about the
current situation of an NSF. This YANG module imports from
[RFC6991], [RFC8343], and [I-D.ietf-i2nsf-nsf-facing-interface-dm],
and makes references to [RFC0768] [RFC0791] [RFC0792] [RFC0793]
[RFC0854] [RFC1939] [RFC0959] [RFC2595] [RFC4340] [RFC4443] [RFC5321]
[RFC5646] [RFC6242] [RFC6265] [RFC8200] [RFC8641] [RFC9051]
[I-D.ietf-httpbis-http2bis] [I-D.ietf-httpbis-messaging]
[I-D.ietf-httpbis-semantics] [I-D.ietf-tcpm-rfc793bis]
[I-D.ietf-tsvwg-rfc4960-bis] [IANA-HTTP-Status-Code]
[IANA-Media-Types].
<CODE BEGINS> file "ietf-i2nsf-nsf-monitoring@2022-02-15.yang"
module ietf-i2nsf-nsf-monitoring {
yang-version 1.1;
namespace
"urn:ietf:params:xml:ns:yang:ietf-i2nsf-nsf-monitoring";
prefix
nsfmi;
import ietf-inet-types{
prefix inet;
reference
"Section 4 of RFC 6991";
}
import ietf-yang-types {
prefix yang;
reference
"Section 3 of RFC 6991";
}
import ietf-i2nsf-policy-rule-for-nsf {
prefix nsfintf;
reference
"Section 4.1 of draft-ietf-i2nsf-nsf-facing-interface-dm-17";
}
import ietf-interfaces {
prefix if;
reference
"Section 5 of RFC 8343";
}
organization
"IETF I2NSF (Interface to Network Security Functions)
Working Group";
Jeong, et al. Expires 19 August 2022 [Page 35]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
contact
"WG Web: <https://datatracker.ietf.org/wg/i2nsf>
WG List: <mailto:i2nsf@ietf.org>
Editor: Jaehoon Paul Jeong
<mailto:pauljeong@skku.edu>
Editor: Patrick Lingga
<mailto:patricklink@skku.edu>";
description
"This module is a YANG module for I2NSF NSF Monitoring.
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this
document are to be interpreted as described in BCP 14
(RFC 2119) (RFC 8174) when, and only when, they appear
in all capitals, as shown here.
Copyright (c) 2022 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC itself
for full legal notices.";
revision "2022-02-15" {
description "Latest revision";
reference
"RFC XXXX: I2NSF NSF Monitoring Interface YANG Data Model";
// RFC Ed.: replace XXXX with an actual RFC number and remove
// this note.
}
/*
* Typedefs
*/
typedef severity {
Jeong, et al. Expires 19 August 2022 [Page 36]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
type enumeration {
enum critical {
description
"The 'critical' severity level indicates that
an immediate corrective action is required.
A 'critical' severity is reported when a service
becomes totally out of service and must be restored.";
}
enum high {
description
"The 'high' severity level indicates that
an urgent corrective action is required.
A 'high' severity is reported when there is
a severe degradation in the capability of the
service and its full capability must be restored.";
}
enum middle {
description
"The 'middle' severity level indicates the
existence of a non-service-affecting fault
condition and corrective action should be done
to prevent a more serious fault. The 'middle'
severity is reported when the detected problem
is not degrading the capability of the service, but
some service degradation might happen if not
prevented.";
}
enum low {
description
"The 'low' severity level indicates the detection
of a potential fault before any effect is observed.
The 'low' severity is reported when an action should
be done before a fault happen.";
}
}
description
"An indicator representing severity levels. The severity
levels starting from the highest are critical, high, middle,
and low.";
}
typedef log-action {
type enumeration {
enum allow {
description
"If action is allow";
}
enum alert {
Jeong, et al. Expires 19 August 2022 [Page 37]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
description
"If action is alert";
}
enum block {
description
"If action is block";
}
enum discard {
description
"If action is discard";
}
enum declare {
description
"If action is declare";
}
enum block-ip {
description
"If action is block-ip";
}
enum block-service{
description
"If action is block-service";
}
}
description
"The type representing action for
logging.";
}
typedef dpi-type{
type enumeration {
enum file-blocking{
description
"DPI for preventing the specified file types from flowing
in the network.";
}
enum data-filtering{
description
"DPI for preventing sensitive information (e.g., Credit
Card Number or Social Security Numbers) leaving a
protected network.";
}
enum application-behavior-control{
description
"DPI for filtering packet based on the application or
network behavior analysis to identify malicious or
unusual activity.";
}
Jeong, et al. Expires 19 August 2022 [Page 38]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
}
description
"The type of Deep Packet Inspection (DPI).
The defined types are file-blocking, data-filtering, and
application-behavior-control.";
}
typedef operation-type{
type enumeration {
enum login {
description
"The operation type is Login.";
}
enum logout {
description
"The operation type is Logout.";
}
enum configuration {
description
"The operation type is Configuration. The configuration
operation includes the command for writing a new
configuration and modifying an existing configuration.";
}
enum other {
description
"The operation type is Other operation. This other
includes all operations done by a user except login,
logout, and configuration.";
}
}
description
"The type of operation done by a user during a session.
The user operation is not considering their privileges.";
}
typedef login-role {
type enumeration {
enum administrator {
description
"Administrator (i.e., Superuser)'s login role.
Non-restricted role.";
}
enum user {
description
"User login role. Semi-restricted role, some data and
configurations are available but confidential or important
data and configuration are restricted.";
}
Jeong, et al. Expires 19 August 2022 [Page 39]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
enum guest {
description
"Guest login role. Restricted role, only few read data are
available and write configurations are restricted.";
}
}
description
"The privilege level of the user account.";
}
/*
* Identity
*/
identity characteristics {
description
"Base identity for monitoring information
characteristics";
}
identity acquisition-method {
base characteristics;
description
"The type of acquisition-method. It can be multiple
types at once.";
}
identity subscription {
base acquisition-method;
description
"The acquisition-method type is subscription.";
}
identity query {
base acquisition-method;
description
"The acquisition-method type is query.";
}
identity emission-type {
base characteristics;
description
"The type of emission-type.";
}
identity periodic {
base emission-type;
description
"The emission-type type is periodic.";
}
identity on-change {
base emission-type;
description
Jeong, et al. Expires 19 August 2022 [Page 40]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
"The emission-type type is on-change.";
}
identity on-request {
base emission-type;
description
"The emission-type type is on-request.";
}
identity dampening-type {
base characteristics;
description
"The type of message dampening to stop the rapid transmission
of messages. The dampening types are on-repetition and
no-dampening";
}
identity no-dampening {
base dampening-type;
description
"The dampening-type is no-dampening. No-dampening type does
not limit the transmission for the messages of the same
type.";
}
identity on-repetition {
base dampening-type;
description
"The dampening-type is on-repetition. On-repetition type limits
the transmitted on-change message to one message at a certain
interval.";
}
identity authentication-mode {
description
"The authentication mode for a user to connect to the NSF,
e.g., pre-configured-key and certificate-authority";
}
identity pre-configured-key {
base authentication-mode;
description
"The pre-configured-key is an authentication using a key
authentication.";
}
identity certificate-authority {
base authentication-mode;
description
"The certificate-authority (CA) is an authentication using a
digital certificate.";
}
identity event {
Jeong, et al. Expires 19 August 2022 [Page 41]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
description
"Base identity for I2NSF events.";
}
identity system-event {
base event;
description
"Identity for system event";
}
identity system-alarm {
base event;
description
"Base identity for detectable system alarm types";
}
identity memory-alarm {
base system-alarm;
description
"A memory alarm is alerted.";
}
identity cpu-alarm {
base system-alarm;
description
"A CPU alarm is alerted.";
}
identity disk-alarm {
base system-alarm;
description
"A disk alarm is alerted.";
}
identity hardware-alarm {
base system-alarm;
description
"A hardware alarm (i.e., hardware failure) is alerted.";
}
identity interface-alarm {
base system-alarm;
description
"An interface alarm is alerted.";
}
identity access-violation {
base system-event;
description
"The access-violation system event is an event when a user
tries to access (read, write, create, or delete) any
information or execute commands above their privilege.";
Jeong, et al. Expires 19 August 2022 [Page 42]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
}
identity configuration-change {
base system-event;
description
"The configuration-change system event is an event when a user
adds a new configuration or modify an existing configuration
(write configuration).";
}
identity attack-type {
description
"The root ID of attack-based notification
in the notification taxonomy";
}
identity nsf-attack-type {
base attack-type;
description
"This ID is intended to be used
in the context of NSF event.";
}
identity virus-type {
base nsf-attack-type;
description
"The type of virus. It can be multiple types at once.
This attack type is associated with a detected
system-log virus-attack.";
}
identity trojan {
base virus-type;
description
"The virus type is a trojan. Trojan is able to disguise the
intent of the files or programs to misleads the users.";
}
identity worm {
base virus-type;
description
"The virus type is a worm. Worm can self-replicate and
spread through the network automatically.";
}
identity macro {
base virus-type;
description
"The virus type is a macro virus. Macro causes a series of
threats automatically after the program is executed.";
}
identity boot-sector {
base virus-type;
Jeong, et al. Expires 19 August 2022 [Page 43]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
description
"The virus type is a boot sector virus. Boot sector is a virus
that infects the core of the computer, affecting the startup
process.";
}
identity polymorphic {
base virus-type;
description
"The virus type is a polymorphic virus. Polymorphic can
modify its version when it replicates, making it hard to
detect.";
}
identity overwrite {
base virus-type;
description
"The virus type is an overwrite virus. Overwrite can remove
existing software and replace it with malicious code by
overwriting it.";
}
identity resident {
base virus-type;
description
"The virus-type is a resident virus. Resident saves itself in
the computer's memory and infects other files and software.";
}
identity non-resident {
base virus-type;
description
"The virus-type is a non-resident virus. Non-resident attaches
directly to an executable file and enters the device when
executed.";
}
identity multipartite {
base virus-type;
description
"The virus-type is a multipartite virus. Multipartite attacks
both the boot sector and executables files of a computer.";
}
identity spacefiller {
base virus-type;
description
"The virus-type is a spacefiller virus. Spacefiller fills empty
spaces of a file or software with malicious code.";
}
identity intrusion-attack-type {
base nsf-attack-type;
description
Jeong, et al. Expires 19 August 2022 [Page 44]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
"The attack type is associated with a detected
system-log intrusion.";
}
identity brute-force {
base intrusion-attack-type;
description
"The intrusion type is brute-force.";
}
identity buffer-overflow {
base intrusion-attack-type;
description
"The intrusion type is buffer-overflow.";
}
identity web-attack-type {
base nsf-attack-type;
description
"The attack type is associated with a detected
system-log web-attack.";
}
identity command-injection {
base web-attack-type;
description
"The detected web attack type is command injection.";
}
identity xss {
base web-attack-type;
description
"The detected web attack type is Cross Site Scripting (XSS).";
}
identity csrf {
base web-attack-type;
description
"The detected web attack type is Cross Site Request Forgery.";
}
identity ddos-type {
base nsf-attack-type;
description
"Base identity for detectable flood types";
}
identity syn-flood {
base ddos-type;
description
"A SYN flood is detected.";
}
identity ack-flood {
base ddos-type;
description
Jeong, et al. Expires 19 August 2022 [Page 45]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
"An ACK flood is detected.";
}
identity syn-ack-flood {
base ddos-type;
description
"A SYN-ACK flood is detected.";
}
identity fin-rst-flood {
base ddos-type;
description
"A FIN-RST flood is detected.";
}
identity tcp-con-flood {
base ddos-type;
description
"A TCP connection flood is detected.";
}
identity udp-flood {
base ddos-type;
description
"A UDP flood is detected.";
}
identity icmpv4-flood {
base ddos-type;
description
"An ICMPv4 flood is detected.";
}
identity icmpv6-flood {
base ddos-type;
description
"An ICMPv6 flood is detected.";
}
identity http-flood {
base ddos-type;
description
"An HTTP flood is detected.";
}
identity https-flood {
base ddos-type;
description
"An HTTPS flood is detected.";
}
identity dns-query-flood {
base ddos-type;
description
"A Domain Name System (DNS) query flood is detected.";
}
identity dns-reply-flood {
Jeong, et al. Expires 19 August 2022 [Page 46]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
base ddos-type;
description
"A Domain Name System (DNS) reply flood is detected.";
}
identity sip-flood {
base ddos-type;
description
"A Session Initiation Protocol (SIP) flood is detected.";
}
identity tls-flood {
base ddos-type;
description
"A Transport Layer Security (TLS) flood is detected";
}
identity ntp-amp-flood {
base ddos-type;
description
"A Network Time Protocol (NTP) amplification is detected";
}
identity req-method {
description
"A set of request types in HTTP (if applicable).";
}
identity put {
base req-method;
description
"The detected request type is PUT.";
reference
"draft-ietf-httpbis-semantics-19: HTTP Semantics
- Request Method PUT";
}
identity post {
base req-method;
description
"The detected request type is POST.";
reference
"draft-ietf-httpbis-semantics-19: HTTP Semantics
- Request Method POST";
}
identity get {
base req-method;
description
"The detected request type is GET.";
reference
"draft-ietf-httpbis-semantics-19: HTTP Semantics
- Request Method GET";
}
Jeong, et al. Expires 19 August 2022 [Page 47]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
identity head {
base req-method;
description
"The detected request type is HEAD.";
reference
"draft-ietf-httpbis-semantics-19: HTTP Semantics
- Request Method HEAD";
}
identity delete {
base req-method;
description
"The detected request type is DELETE.";
reference
"draft-ietf-httpbis-semantics-19: HTTP Semantics
- Request Method DELETE";
}
identity connect {
base req-method;
description
"The detected request type is CONNECT.";
reference
"draft-ietf-httpbis-semantics-19: HTTP Semantics
- Request Method CONNECT";
}
identity options {
base req-method;
description
"The detected request type is OPTIONS.";
reference
"draft-ietf-httpbis-semantics-19: HTTP Semantics
- Request Method OPTIONS";
}
identity trace {
base req-method;
description
"The detected request type is TRACE.";
reference
"draft-ietf-httpbis-semantics-19: HTTP Semantics
- Request Method TRACE";
}
identity filter-type {
description
"The type of filter used to detect an attack,
for example, a web-attack. It can be applicable to
more than web-attacks.";
}
identity allow-list {
Jeong, et al. Expires 19 August 2022 [Page 48]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
base filter-type;
description
"The applied filter type is an allow list. This filter blocks
all connection except the specified list.";
}
identity deny-list {
base filter-type;
description
"The applied filter type is a deny list. This filter opens all
connection except the specified list.";
}
identity unknown-filter {
base filter-type;
description
"The applied filter is unknown.";
}
identity protocol {
description
"An identity used to enable type choices in leaves
and leaflists with respect to protocol metadata. This is used
to identify the type of protocol that goes through the NSF.";
}
identity ip {
base protocol;
description
"General IP protocol type.";
reference
"RFC 791: Internet Protocol
RFC 8200: Internet Protocol, Version 6 (IPv6)";
}
identity ipv4 {
base ip;
description
"IPv4 protocol type.";
reference
"RFC 791: Internet Protocol";
}
identity ipv6 {
base ip;
description
"IPv6 protocol type.";
reference
"RFC 8200: Internet Protocol, Version 6 (IPv6)";
}
identity icmp {
base protocol;
description
Jeong, et al. Expires 19 August 2022 [Page 49]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
"Base identity for ICMPv4 and ICMPv6 condition capability";
reference
"RFC 792: Internet Control Message Protocol
RFC 4443: Internet Control Message Protocol (ICMPv6)
for the Internet Protocol Version 6 (IPv6) Specification
- ICMPv6";
}
identity icmpv4 {
base icmp;
description
"ICMPv4 protocol type.";
reference
"RFC 791: Internet Protocol
RFC 792: Internet Control Message Protocol";
}
identity icmpv6 {
base icmp;
description
"ICMPv6 protocol type.";
reference
"RFC 8200: Internet Protocol, Version 6 (IPv6)
RFC 4443: Internet Control Message Protocol (ICMPv6)
for the Internet Protocol Version 6 (IPv6)
Specification";
}
identity transport-protocol {
base protocol;
description
"Base identity for Layer 4 protocol condition capabilities,
e.g., TCP, UDP, SCTP, DCCP, and ICMP";
}
identity tcp {
base transport-protocol;
description
"TCP protocol type.";
reference
"RFC 793: Transmission Control Protocol
draft-ietf-tcpm-rfc793bis-25: Transmission Control Protocol
(TCP) Specification";
}
identity udp {
base transport-protocol;
description
"UDP protocol type.";
reference
"RFC 768: User Datagram Protocol";
}
identity sctp {
Jeong, et al. Expires 19 August 2022 [Page 50]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
base transport-protocol;
description
"Identity for SCTP condition capabilities";
reference
"draft-ietf-tsvwg-rfc4960-bis-18: Stream Control Transmission
Protocol";
}
identity dccp {
base transport-protocol;
description
"Identity for DCCP condition capabilities";
reference
"RFC 4340: Datagram Congestion Control Protocol";
}
identity application-protocol {
base protocol;
description
"Base identity for Application protocol. Note that popular
application protocols (e.g., HTTP, HTTPS, FTP, POP3, and
IMAP) are handled in this YANG module, rather than all
the existing application protocols.";
}
identity http {
base application-protocol;
description
"The identity for Hypertext Transfer Protocol version 1.X
(HTTP/1.X).";
reference
"draft-ietf-httpbis-semantics-19: HTTP Semantics
draft-ietf-httpbis-messaging-19: HTTP/1.1";
}
identity https {
base application-protocol;
description
"The identity for Hypertext Transfer Protocol version 1.X
(HTTP/1.X) over TLS.";
reference
"draft-ietf-httpbis-semantics-19: HTTP Semantics
draft-ietf-httpbis-messaging-19: HTTP/1.1";
}
identity http2 {
base application-protocol;
description
"The identity for Hypertext Transfer Protocol version 2
(HTTP/2).";
reference
"draft-ietf-httpbis-http2bis-07: HTTP/2";
}
Jeong, et al. Expires 19 August 2022 [Page 51]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
identity https2 {
base application-protocol;
description
"The identity for Hypertext Transfer Protocol version 2
(HTTP/2) over TLS.";
reference
"draft-ietf-httpbis-http2bis-07: HTTP/2";
}
identity ftp {
base application-protocol;
description
"FTP protocol type.";
reference
"RFC 959: File Transfer Protocol";
}
identity ssh {
base application-protocol;
description
"SSH protocol type.";
reference
"RFC 6242: Using the NETCONF Protocol over Secure Shell (SSH)";
}
identity telnet {
base application-protocol;
description
"The identity for telnet.";
reference
"RFC 854: Telnet Protocol";
}
identity smtp {
base application-protocol;
description
"The identity for smtp.";
reference
"RFC 5321: Simple Mail Transfer Protocol (SMTP)";
}
identity pop3 {
base application-protocol;
description
"The identity for Post Office Protocol 3 (POP3).";
reference
"RFC 1939: Post Office Protocol - Version 3 (POP3)";
}
identity pop3s {
base application-protocol;
description
"The identity for Post Office Protocol 3 (POP3) over TLS";
reference
Jeong, et al. Expires 19 August 2022 [Page 52]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
"RFC 1939: Post Office Protocol - Version 3 (POP3)
RFC 2595: Using TLS with IMAP, POP3 and ACAP";
}
identity imap {
base application-protocol;
description
"The identity for Internet Message Access Protocol (IMAP).";
reference
"RFC 9051: Internet Message Access Protocol (IMAP) - Version
4rev2";
}
identity imaps {
base application-protocol;
description
"The identity for Internet Message Access Protocol (IMAP) over
TLS";
reference
"RFC 9051: Internet Message Access Protocol (IMAP) - Version
4rev2
RFC 2595: Using TLS with IMAP, POP3 and ACAP";
}
/*
* Grouping
*/
grouping timestamp {
description
"Grouping for identifying the time of the message.";
leaf timestamp {
type yang:date-and-time;
description
"Specify the time of a message being delivered.";
}
}
grouping common-monitoring-data {
description
"A set of common monitoring data that is needed
as the basic information.";
leaf message {
type string;
description
"This is a freetext annotation for
monitoring a notification's content.";
}
leaf vendor-name {
type string;
Jeong, et al. Expires 19 August 2022 [Page 53]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
description
"The name of the NSF vendor. The string is unrestricted to
identify the provider or vendor of the NSF.";
}
leaf nsf-name {
type union {
type string;
type inet:ip-address-no-zone;
}
description
"The name or IP address of the NSF generating the message.
If the given nsf-name is not an IP address, the name can be
an arbitrary string including a FQDN (Fully Qualified Domain
Name). The name MUST be unique in the scope of management
domain for a different NSF to identify the NSF that
generates the message.";
}
leaf severity {
type severity;
description
"The severity of the alarm such as critical, high,
middle, and low.";
}
}
grouping characteristics {
description
"A set of characteristics of a notification.";
leaf acquisition-method {
type identityref {
base acquisition-method;
}
description
"The acquisition-method for characteristics";
}
leaf emission-type {
type identityref {
base emission-type;
}
description
"The emission-type for characteristics";
}
leaf dampening-type {
type identityref {
base dampening-type;
}
description
"The dampening-type for characteristics";
}
Jeong, et al. Expires 19 August 2022 [Page 54]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
}
grouping i2nsf-system-alarm-type-content {
description
"A set of contents for alarm type notification.";
leaf usage {
type uint8 {
range "0..100";
}
units "percent";
description
"Specifies the used percentage";
}
leaf threshold {
type uint8 {
range "0..100";
}
units "percent";
description
"The threshold percentage triggering the alarm or
the event";
}
}
grouping i2nsf-system-event-type-content {
description
"System event metadata associated with system events
caused by user activity. This can be extended to provide
additional information.";
leaf user {
type string;
mandatory true;
description
"The name of a user";
}
leaf-list group {
type string;
min-elements 1;
description
"The group(s) to which a user belongs.";
}
leaf ip-address {
type inet:ip-address-no-zone;
mandatory true;
description
"The IPv4 (or IPv6) address of a user that trigger the
event.";
}
leaf l4-port-number {
type inet:port-number;
Jeong, et al. Expires 19 August 2022 [Page 55]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
mandatory true;
description
"The transport layer port number used by the user.";
}
leaf authentication {
type identityref {
base authentication-mode;
}
description
"The authentication-mode of a user.";
}
}
grouping i2nsf-nsf-event-type-content {
description
"A set of common IPv4 (or IPv6)-related NSF event
content elements";
leaf dst-ip {
type inet:ip-address-no-zone;
description
"The destination IPv4 (IPv6) address of the packet";
}
leaf dst-port {
type inet:port-number;
description
"The destination port of the packet";
}
leaf rule-name {
type leafref {
path
"/nsfintf:i2nsf-security-policy"
+"/nsfintf:rules/nsfintf:name";
}
mandatory true;
description
"The name of the I2NSF Policy Rule being triggered";
}
}
grouping i2nsf-nsf-event-type-content-extend {
description
"A set of extended common IPv4 (or IPv6)-related NSF
event content elements";
uses i2nsf-nsf-event-type-content;
leaf src-ip {
type inet:ip-address-no-zone;
description
"The source IPv4 (or IPv6) address of the packet or flow";
}
leaf src-port {
Jeong, et al. Expires 19 August 2022 [Page 56]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
type inet:port-number;
description
"The source port of the packet or flow";
}
}
grouping log-action {
description
"A grouping for logging action.";
leaf-list action {
type log-action;
description
"Action type: allow, alert, block, discard, declare,
block-ip, block-service";
}
}
grouping attack-rates {
description
"A set of traffic rates for monitoring attack traffic
data";
leaf attack-rate {
type uint32;
units "pps";
description
"The average packets per second (pps) rate of attack
traffic";
}
leaf attack-throughput {
type uint64;
units "Bps";
description
"The average bytes per second (Bps) throughput of attack
traffic";
}
}
grouping traffic-rates {
description
"A set of traffic rates for statistics data";
leaf discontinuity-time {
type yang:date-and-time;
mandatory true;
description
"The time on the most recent occasion at which any one or
more of the counters suffered a discontinuity.
If no such discontinuities have occurred since the last
re-initialization of the local management subsystem, then
this node contains the time the local management subsystem
was re-initialized.";
}
Jeong, et al. Expires 19 August 2022 [Page 57]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
leaf total-traffic {
type yang:counter64;
units "packets";
description
"The total number of traffic packets (in and out) in the
NSF.";
}
leaf in-traffic-average-rate {
type uint32;
units "pps";
description
"Inbound traffic average rate in packets per second (pps).
The average is calculated from the start of the NSF service
until the generation of this record.";
}
leaf in-traffic-peak-rate {
type uint32;
units "pps";
description
"Inbound traffic peak rate in packets per second (pps).";
}
leaf in-traffic-average-throughput {
type uint64;
units "Bps";
description
"Inbound traffic average throughput in bytes per second
(Bps). The average is calculated from the start of the NSF
service until the generation of this record.";
}
leaf in-traffic-peak-throughput {
type uint64;
units "Bps";
description
"Inbound traffic peak throughput in bytes per second (Bps).";
}
leaf out-traffic-average-rate {
type uint32;
units "pps";
description
"Outbound traffic average rate in packets per second (pps).
The average is calculated from the start of the NSF service
until the generation of this record.";
}
leaf out-traffic-peak-rate {
type uint32;
units "pps";
description
"Outbound traffic peak rate in packets per second (pps).";
Jeong, et al. Expires 19 August 2022 [Page 58]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
}
leaf out-traffic-average-throughput {
type uint64;
units "Bps";
description
"Outbound traffic average throughput in bytes per second
(Bps). The average is calculated from the start of the NSF
service until the generation of this record.";
}
leaf out-traffic-peak-throughput {
type uint64;
units "Bps";
description
"Outbound traffic peak throughput in bytes per second
(Bps).";
}
}
grouping i2nsf-system-counter-type-content{
description
"A set of counters for an interface traffic data.";
leaf interface-name {
type if:interface-ref;
description
"Network interface name configured in an NSF";
reference
"RFC 8343: A YANG Data Model for Interface Management";
}
leaf protocol {
type identityref {
base protocol;
}
description
"The type of network protocol for the interface counter.
If this field is empty, then the counter includes all
protocols (e.g., IPv4, IPv6, TCP, and UDP)";
}
leaf in-total-traffic-pkts {
type yang:counter64;
description
"Total inbound packets";
}
leaf out-total-traffic-pkts {
type yang:counter64;
description
"Total outbound packets";
}
leaf in-total-traffic-bytes {
type uint64;
Jeong, et al. Expires 19 August 2022 [Page 59]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
units "bytes";
description
"Total inbound bytes";
}
leaf out-total-traffic-bytes {
type uint64;
units "bytes";
description
"Total outbound bytes";
}
leaf in-drop-traffic-pkts {
type yang:counter64;
description
"Total inbound drop packets";
}
leaf out-drop-traffic-pkts {
type yang:counter64;
description
"Total outbound drop packets";
}
leaf in-drop-traffic-bytes {
type uint64;
units "bytes";
description
"Total inbound drop bytes";
}
leaf out-drop-traffic-bytes {
type uint64;
units "bytes";
description
"Total outbound drop bytes";
}
uses traffic-rates;
}
grouping i2nsf-nsf-counters-type-content{
description
"A set of contents of a policy in an NSF.";
leaf policy-name {
type leafref {
path
"/nsfintf:i2nsf-security-policy"
+"/nsfintf:name";
}
mandatory true;
description
"The name of the policy being triggered";
}
Jeong, et al. Expires 19 August 2022 [Page 60]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
leaf src-user{
type string;
description
"The I2NSF User's name who generates the policy.";
}
}
grouping enable-notification {
description
"A grouping for enabling or disabling notification";
leaf enabled {
type boolean;
default "true";
description
"Enables or Disables the notification.
If 'true', then the notification is enabled.
If 'false, then the notification is disabled.";
}
}
grouping dampening {
description
"A grouping for dampening period of notification.";
leaf dampening-period {
type uint32;
units "centiseconds";
default "0";
description
"Specifies the minimum interval between the assembly of
successive update records for a single receiver of a
subscription. Whenever subscribed objects change and
a dampening-period interval (which may be zero) has
elapsed since the previous update record creation for
a receiver, any subscribed objects and properties
that have changed since the previous update record
will have their current values marshalled and placed
in a new update record. But if the subscribed objects change
when the dampening-period is active, it should update the
record without sending the notification until the dampening-
period is finished. If multiple changes happen during the
active dampening-period, it should update the record with
the latest data. And at the end of the dampening-period, it
should send the record as a notification with the latest
updated record and restart the countdown.";
reference
"RFC 8641: Subscription to YANG Notifications for
Datastore Updates - Section 5.";
}
Jeong, et al. Expires 19 August 2022 [Page 61]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
}
grouping language {
description
"A grouping for language tag";
leaf language {
type string {
pattern
"^((en-GB-oed|i-ami|i-bnn|i-default|"
+ "i-enochian|i-hak|i-klingon|i-lux|i-mingo|i-navajo|i-pwn|"
+ "i-tao|i-tay|i-tsu|sgn-BE-FR|sgn-BE-NL|sgn-CH-DE)|"
+ "(art-lojban|cel-gaulish|no-bok|no-nyn|zh-guoyu|zh-hakka|"
+ "zh-min|zh-min-nan|zh-xiang)|"
+ "(([A-Za-z]{2,3}(-[A-Za-z]{3}(-[A-Za-z]{3}){0,2})?)|"
+ "[A-Za-z]{4}|[A-Za-z]{5,8}"
+ "(-[A-Za-z]{4})?"
+ "(-[A-Za-z]{2}|[0-9]{3})?"
+ "(-[A-Za-z0-9]{5,8}|[0-9][A-Za-z0-9]{3})*"
+ "(-[0-9A-WY-Za-wy-z](-[A-Za-z0-9]{2,8})+)*"
+ "(-x(-[A-Za-z0-9]{1,8})+)?)|"
+ "x(-[A-Za-z0-9]{1,8})+)$";
}
description
"The value in this field describes the human language
intended for the user, so that it allows a user to
differentiate the language that is used in the
notification. This field is mandatory only
when the implementation provides more than one human
language for the human-readable string fields.
This field uses the language-tag production in Section 2.1
in RFC 5646. See the document for more details.";
reference
"RFC 5646: Tags for Identifying Languages";
}
}
/*
* Feature Nodes
*/
feature i2nsf-nsf-detection-ddos {
description
"This feature means it supports I2NSF nsf-detection-ddos
notification";
}
feature i2nsf-nsf-detection-virus {
description
Jeong, et al. Expires 19 August 2022 [Page 62]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
"This feature means it supports I2NSF nsf-detection-virus
notification";
}
feature i2nsf-nsf-detection-intrusion {
description
"This feature means it supports I2NSF nsf-detection-intrusion
notification";
}
feature i2nsf-nsf-detection-web-attack {
description
"This feature means it supports I2NSF nsf-detection-web-attack
notification";
}
feature i2nsf-nsf-detection-voip-vocn {
description
"This feature means it supports I2NSF nsf-detection-voip-vocn
notification";
}
feature i2nsf-nsf-log-dpi {
description
"This feature means it supports I2NSF nsf-log-dpi
notification";
}
/*
* Notification nodes
*/
notification i2nsf-event {
description
"Notification for I2NSF Event.";
uses language;
choice sub-event-type {
description
"This choice must be augmented with cases for each allowed
sub-event. Only 1 sub-event will be instantiated in each
i2nsf-event message. Each case is expected to define one
container with all the sub-event fields.";
case i2nsf-system-detection-alarm {
container i2nsf-system-detection-alarm{
description
"This notification is sent, when a system alarm
is detected.";
leaf alarm-category {
type identityref {
base system-alarm;
Jeong, et al. Expires 19 August 2022 [Page 63]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
}
description
"The alarm category for
system-detection-alarm notification";
}
leaf component-name {
type string;
description
"The hardware component responsible for generating
the message. Applicable for Hardware Failure
Alarm.";
}
leaf interface-name {
type if:interface-ref;
description
"The interface name responsible for generating
the message. Applicable for Network Interface
Failure Alarm.";
reference
"RFC 8343: A YANG Data Model for Interface Management";
}
leaf interface-state {
type enumeration {
enum up {
value 1;
description
"The interface state is up and not congested.
The interface is ready to pass packets.";
}
enum down {
value 2;
description
"The interface state is down, i.e., does not pass
any packets.";
}
enum congested {
value 3;
description
"The interface state is up but congested.";
}
enum testing {
value 4;
description
"In some test mode. No operational packets can
be passed.";
}
enum unknown {
value 5;
Jeong, et al. Expires 19 August 2022 [Page 64]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
description
"Status cannot be determined for some reason.";
}
enum dormant {
value 6;
description
"Waiting for some external event.";
}
enum not-present {
value 7;
description
"Some component (typically hardware) is missing.";
}
enum lower-layer-down {
value 8;
description
"Down due to state of lower-layer interface(s).";
}
}
description
"The state of the interface. Applicable for Network
Interface Failure Alarm.";
reference
"RFC 8343: A YANG Data Model for Interface Management -
Operational States";
}
uses characteristics;
uses i2nsf-system-alarm-type-content;
uses common-monitoring-data;
}
}
case i2nsf-system-detection-event {
container i2nsf-system-detection-event {
description
"This notification is sent when a security-sensitive
authentication action fails.";
leaf event-category {
type identityref {
base system-event;
}
description
"The event category for system-detection-event";
}
uses characteristics;
uses i2nsf-system-event-type-content;
uses common-monitoring-data;
list changes {
Jeong, et al. Expires 19 August 2022 [Page 65]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
key policy-name;
description
"Describes the modification that was made to the
configuration. The minimum information that must be
provided is the name of the policy that has been
altered (added, modified, or removed).
This list can be extended with the detailed
information about the specific changes made to the
configuration based on the implementation.";
leaf policy-name {
type leafref {
path
"/nsfintf:i2nsf-security-policy"
+"/nsfintf:name";
}
description
"The name of the policy configuration that has been
added, modified, or removed.";
}
}
}
}
case i2nsf-traffic-flows {
container i2nsf-traffic-flows {
description
"This notification is sent to inform about the traffic
flows.";
leaf interface-name {
type if:interface-ref;
description
"The mnemonic name of the network interface";
}
leaf interface-type {
type enumeration {
enum ingress {
description
"The corresponding interface-name indicates an
ingress interface.";
}
enum egress {
description
"The corresponding interface-name indicates an
egress interface.";
}
}
description
"The type of a network interface such as an ingress or
Jeong, et al. Expires 19 August 2022 [Page 66]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
egress interface.";
}
leaf src-mac {
type yang:mac-address;
description
"The source MAC address of the traffic flow.";
}
leaf dst-mac {
type yang:mac-address;
description
"The destination MAC address of the traffic flow.";
}
leaf src-ip {
type inet:ip-address-no-zone;
description
"The source IPv4 (or IPv6) address of the flow";
}
leaf dst-ip {
type inet:ip-address-no-zone;
description
"The destination IPv4 (or IPv6) address of the flow";
}
leaf protocol {
type identityref {
base protocol;
}
description
"The protocol type for nsf-detection-intrusion
notification";
}
leaf src-port {
type inet:port-number;
description
"The transport layer source port number of the flow";
}
leaf dst-port {
type inet:port-number;
description
"The transport layer destination port number of the
flow";
}
leaf arrival-rate {
type uint32;
units "pps";
description
"The average arrival rate of the flow in packets per
second. The average is calculated from the start of
the NSF service until the generation of this
Jeong, et al. Expires 19 August 2022 [Page 67]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
record.";
}
leaf arrival-throughput {
type uint32;
units "Bps";
description
"The average arrival rate of the flow in bytes per
second. The average is calculated from the start of
the NSF service until the generation of this
record.";
}
uses characteristics;
uses common-monitoring-data;
}
}
case i2nsf-nsf-detection-session-table {
container i2nsf-nsf-detection-session-table {
description
"This notification is sent, when a session table
event is detected.";
leaf current-session {
type uint32;
description
"The number of concurrent sessions";
}
leaf maximum-session {
type uint32;
description
"The maximum number of sessions that the session
table can support";
}
leaf threshold {
type uint32;
description
"The threshold triggering the event";
}
uses common-monitoring-data;
}
}
}
}
notification i2nsf-log {
description
"Notification for I2NSF log. The notification is generated
from the logs of the NSF.";
Jeong, et al. Expires 19 August 2022 [Page 68]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
uses language;
choice sub-logs-type {
description
"This choice must be augmented with cases for each allowed
sub-logs. Only 1 sub-event will be instantiated in each
i2nsf-logs message. Each case is expected to define one
container with all the sub-logs fields.";
case i2nsf-nsf-system-access-log {
container i2nsf-nsf-system-access-log {
description
"The notification is sent, if there is a new system
log entry about a system access event.";
uses i2nsf-system-event-type-content;
leaf operation-type {
type operation-type;
description
"The operation type that the user executes";
}
leaf input {
type string;
description
"The operation performed by a user after login. The
operation is a command given by a user.";
}
leaf output {
type string;
description
"The result in text format after executing the
input.";
}
uses characteristics;
uses common-monitoring-data;
}
}
case i2nsf-system-res-util-log {
container i2nsf-system-res-util-log {
description
"This notification is sent, if there is a new log
entry representing resource utilization updates.";
leaf system-status {
type enumeration {
enum running {
description
"The system is active and running the security
service.";
}
Jeong, et al. Expires 19 August 2022 [Page 69]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
enum waiting {
description
"The system is active but waiting for an event to
provide the security service.";
}
enum inactive {
description
"The system is inactive and not running the
security service.";
}
}
description
"The current system's running status";
}
leaf cpu-usage {
type uint8;
units "percent";
description
"Specifies the relative percentage of CPU utilization
with respect to platform resources";
}
leaf memory-usage {
type uint8;
units "percent";
description
"Specifies the percentage of memory usage.";
}
list disk {
key disk-id;
description
"Disk is the hardware to store information for a
long period, i.e., Hard Disk or Solid-State Drive.";
leaf disk-id {
type string;
description
"The ID of the storage disk. It is a free form
identifier to identify the storage disk.";
}
leaf disk-usage {
type uint8;
units "percent";
description
"Specifies the percentage of disk usage";
}
leaf disk-space-left {
type uint8;
units "percent";
description
Jeong, et al. Expires 19 August 2022 [Page 70]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
"Specifies the percentage of disk space left";
}
}
leaf session-num {
type uint32;
description
"The total number of sessions";
}
leaf process-num {
type uint32;
description
"The total number of processes";
}
list interface {
key interface-id;
description
"The network interface for connecting a device
with the network.";
leaf interface-id {
type string;
description
"The ID of the network interface. It is a free form
identifier to identify the network interface.";
}
leaf in-traffic-rate {
type uint32;
units "pps";
description
"The total inbound traffic rate in packets per
second";
}
leaf out-traffic-rate {
type uint32;
units "pps";
description
"The total outbound traffic rate in packets per
second";
}
leaf in-traffic-throughput {
type uint64;
units "Bps";
description
"The total inbound traffic throughput in bytes per
second";
}
leaf out-traffic-throughput {
type uint64;
units "Bps";
Jeong, et al. Expires 19 August 2022 [Page 71]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
description
"The total outbound traffic throughput in bytes per
second";
}
}
uses characteristics;
uses common-monitoring-data;
}
}
case i2nsf-system-user-activity-log {
container i2nsf-system-user-activity-log {
description
"This notification is sent, if there is a new user
activity log entry.";
uses characteristics;
uses i2nsf-system-event-type-content;
uses common-monitoring-data;
leaf online-duration {
type uint32;
units "seconds";
description
"The duration of a user's activeness (stays in login)
during a session.";
}
leaf logout-duration {
type uint32;
units "seconds";
description
"The duration of a user's inactiveness (not in login)
from the last session.";
}
leaf additional-info {
type enumeration {
enum successful-login {
description
"The user has succeeded in login.";
}
enum failed-login {
description
"The user has failed in login (e.g., wrong
password)";
}
enum logout {
description
"The user has succeeded in logout";
}
Jeong, et al. Expires 19 August 2022 [Page 72]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
enum successful-password-changed {
description
"The password has been changed successfully";
}
enum failed-password-changed{
description
"The attempt to change password has failed";
}
enum lock {
description
"The user has been locked. A locked user cannot
login.";
}
enum unlock {
description
"The user has been unlocked.";
}
}
description
"User activities, e.g., Successful User Login,
Failed Login attempts, User Logout, Successful User
Password Change, Failed User Password Change, User
Lockout, User Unlocking, and Unknown.";
}
}
}
case i2nsf-nsf-log-dpi {
if-feature "i2nsf-nsf-log-dpi";
container i2nsf-nsf-log-dpi {
description
"This notification is sent, if there is a new DPI
event in the NSF log.";
leaf attack-type {
type dpi-type;
description
"The type of the DPI";
}
uses characteristics;
uses i2nsf-nsf-counters-type-content;
uses common-monitoring-data;
}
}
}
}
notification i2nsf-nsf-event {
description
"Notification for I2NSF NSF Event. This notification is
Jeong, et al. Expires 19 August 2022 [Page 73]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
used for a specific NSF that supported such feature.";
uses language;
choice sub-event-type {
description
"This choice must be augmented with cases for each allowed
sub-event. Only 1 sub-event will be instantiated in each
i2nsf-event message. Each case is expected to define one
container with all the sub-event fields.";
case i2nsf-nsf-detection-ddos {
if-feature "i2nsf-nsf-detection-ddos";
container i2nsf-nsf-detection-ddos {
description
"This notification is sent, when a specific flood type
is detected.";
leaf attack-type {
type identityref {
base ddos-type;
}
description
"Any one of Syn flood, ACK flood, SYN-ACK flood,
FIN/RST flood, TCP Connection flood, UDP flood,
ICMP (i.e., ICMPv4 or ICMPv6) flood, HTTP flood,
HTTPS flood, DNS query flood, DNS reply flood, SIP
flood, etc.";
}
leaf start-time {
type yang:date-and-time;
mandatory true;
description
"The time stamp indicating when the attack started";
}
leaf end-time {
type yang:date-and-time;
description
"The time stamp indicating when the attack ended. If
the attack is still undergoing when sending out the
notification, this field can be empty.";
}
leaf-list attack-src-ip {
type inet:ip-address-no-zone;
description
"The source IPv4 (or IPv6) addresses of attack
traffic. It can hold multiple IPv4 (or IPv6)
addresses.";
}
leaf-list attack-dst-ip {
Jeong, et al. Expires 19 August 2022 [Page 74]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
type inet:ip-address-no-zone;
description
"The destination IPv4 (or IPv6) addresses of attack
traffic. It can hold multiple IPv4 (or IPv6)
addresses.";
}
leaf-list attack-src-port {
type inet:port-number;
description
"The transport layer source ports of the DDoS attack";
}
leaf-list attack-dst-port {
type inet:port-number;
description
"The transport layer destination ports of the DDoS
attack";
}
leaf rule-name {
type leafref {
path
"/nsfintf:i2nsf-security-policy"
+"/nsfintf:rules/nsfintf:name";
}
mandatory true;
description
"The name of the I2NSF Policy Rule being triggered";
}
uses attack-rates;
uses log-action;
uses characteristics;
uses common-monitoring-data;
}
}
case i2nsf-nsf-detection-virus {
if-feature "i2nsf-nsf-detection-virus";
container i2nsf-nsf-detection-virus {
description
"This notification is sent, when a virus is detected.";
uses i2nsf-nsf-event-type-content-extend;
leaf virus-name {
type string;
description
"The name of the detected virus";
}
leaf virus-type {
type identityref {
base virus-type;
Jeong, et al. Expires 19 August 2022 [Page 75]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
}
description
"The virus type of the detected virus";
}
leaf host {
type union {
type string;
type inet:ip-address-no-zone;
}
description
"The name or IP address of the host/device. This is
used to identify the host/device that is infected by
the virus. If the given name is not an IP address, the
name can be an arbitrary string including a FQDN
(Fully Qualified Domain Name). The name MUST be unique
in the scope of management domain for identifying the
device that has been infected with a virus.";
}
leaf file-type {
type string;
description
"The type of file virus code is found in (if
applicable).";
reference
"IANA Website: Media Types";
}
leaf file-name {
type string;
description
"The name of file virus code is found in (if
applicable).";
}
leaf os {
type string;
description
"The operating system of the device.";
}
uses log-action;
uses characteristics;
uses common-monitoring-data;
}
}
case i2nsf-nsf-detection-intrusion {
if-feature "i2nsf-nsf-detection-intrusion";
container i2nsf-nsf-detection-intrusion {
description
"This notification is sent, when an intrusion event
is detected.";
Jeong, et al. Expires 19 August 2022 [Page 76]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
uses i2nsf-nsf-event-type-content-extend;
leaf protocol {
type identityref {
base transport-protocol;
}
description
"The transport protocol type for
nsf-detection-intrusion notification";
}
leaf app {
type identityref {
base application-protocol;
}
description
"The employed application layer protocol";
}
leaf attack-type {
type identityref {
base intrusion-attack-type;
}
description
"The sub attack type for intrusion attack";
}
uses log-action;
uses attack-rates;
uses characteristics;
uses common-monitoring-data;
}
}
case i2nsf-nsf-detection-web-attack {
if-feature "i2nsf-nsf-detection-web-attack";
container i2nsf-nsf-detection-web-attack {
description
"This notification is sent, when an attack event is
detected.";
uses i2nsf-nsf-event-type-content-extend;
leaf attack-type {
type identityref {
base web-attack-type;
}
description
"Concrete web attack type, e.g., SQL injection,
command injection, XSS, and CSRF.";
}
leaf req-method {
type identityref {
base req-method;
}
Jeong, et al. Expires 19 August 2022 [Page 77]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
description
"The HTTP method of the request, e.g., PUT or GET.";
reference
"draft-ietf-httpbis-semantics-19: HTTP Semantics - Request
Methods";
}
leaf req-target {
type string;
description
"The HTTP Request Target. This field can be filled in
the format of origin-form, absolute-form,
authority-form, or asterisk-form";
reference
"draft-ietf-httpbis-messaging-19: HTTP/1.1 - Request
Target";
}
leaf-list filtering-type {
type identityref {
base filter-type;
}
description
"URL filtering type, e.g., deny-list, allow-list,
and Unknown";
}
leaf req-user-agent {
type string;
description
"The HTTP User-Agent header field of the request";
reference
"draft-ietf-httpbis-semantics-19: HTTP Semantics - User
Agent";
}
leaf cookie {
type string;
description
"The HTTP Cookie header field of the request from
the user agent.";
reference
"RFC 6265: HTTP State Management Mechanism - Cookie";
}
leaf req-host {
type string;
description
"The HTTP Host header field of the request";
reference
"draft-ietf-httpbis-semantics-19: HTTP Semantics - Host";
}
leaf response-code {
Jeong, et al. Expires 19 August 2022 [Page 78]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
type string;
description
"The HTTP Response status code";
reference
"IANA Website: Hypertext Transfer Protocol (HTTP)
Status Code Registry";
}
uses characteristics;
uses log-action;
uses common-monitoring-data;
}
}
case i2nsf-nsf-detection-voip-vocn {
if-feature "i2nsf-nsf-detection-voip-vocn";
container i2nsf-nsf-detection-voip-vocn {
description
"This notification is sent, when a VoIP/VoCN violation
is detected.";
uses i2nsf-nsf-event-type-content-extend;
leaf-list source-voice-id {
type string;
description
"The detected source voice ID for VoIP and VoCN that
violates the security policy.";
}
leaf-list destination-voice-id {
type string;
description
"The detected destination voice ID for VoIP and VoCN
that violates the security policy.";
}
leaf-list user-agent {
type string;
description
"The detected user-agent for VoIP and VoCN that
violates the security policy.";
}
uses common-monitoring-data;
}
}
}
}
/*
* Data nodes
*/
container i2nsf-counters {
config false;
description
Jeong, et al. Expires 19 August 2022 [Page 79]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
"The state data representing continuous value changes of
information elements that occur very frequently. The value
should be calculated from the start of the service of the
NSF.";
uses language;
list system-interface {
key interface-name;
description
"Interface counters provide the visibility of traffic into
and out of an NSF, and bandwidth usage.";
uses characteristics;
uses i2nsf-system-counter-type-content;
uses common-monitoring-data;
uses timestamp;
}
list nsf-firewall {
key policy-name;
description
"Firewall counters provide the visibility of traffic
signatures, bandwidth usage, and how the configured security
and bandwidth policies have been applied.";
uses characteristics;
uses i2nsf-nsf-counters-type-content;
uses traffic-rates;
uses common-monitoring-data;
uses timestamp;
}
list nsf-policy-hits {
key policy-name;
description
"Policy hit counters record the number of hits that traffic
packets match a security policy. It can check if policy
configurations are correct or not.";
uses characteristics;
uses i2nsf-nsf-counters-type-content;
uses common-monitoring-data;
leaf discontinuity-time {
type yang:date-and-time;
mandatory true;
description
"The time on the most recent occasion at which any one or
more of the counters suffered a discontinuity. If no such
discontinuities have occurred since the last
re-initialization of the local management subsystem, then
this node contains the time the local management subsystem
was re-initialized.";
Jeong, et al. Expires 19 August 2022 [Page 80]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
}
leaf hit-times {
type yang:counter64;
description
"The number of times that the security policy matches the
specified traffic.";
}
uses timestamp;
}
}
container i2nsf-monitoring-configuration {
description
"The container for configuring I2NSF monitoring.";
container i2nsf-system-detection-alarm {
description
"The container for configuring I2NSF system-detection-alarm
notification";
uses enable-notification;
list system-alarm {
key alarm-type;
description
"Configuration for system alarm (i.e., CPU, Memory, and
Disk Usage)";
leaf alarm-type {
type enumeration {
enum cpu {
description
"To configure the CPU usage threshold to trigger the
cpu-alarm";
}
enum memory {
description
"To configure the Memory usage threshold to trigger
the memory-alarm";
}
enum disk {
description
"To configure the Disk (storage) usage threshold to
trigger the disk-alarm";
}
}
description
"Type of alarm to be configured. The three alarm-types
defined here are used to configure the threshold of the
monitoring notification. The threshold is used to
determine when the notification should be sent.
The other two alarms defined in the module (i.e.,
Jeong, et al. Expires 19 August 2022 [Page 81]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
hardware-alarm and interface-alarm) do not use any
threshold value to create a notification. These alarms
detect a failure or a change of state to create a
notification.";
}
leaf threshold {
type uint8 {
range "1..100";
}
units "percent";
description
"The configuration for threshold percentage to trigger
the alarm. The alarm will be triggered if the usage
is exceeded the threshold.";
}
uses dampening;
}
}
container i2nsf-system-detection-event {
description
"The container for configuring I2NSF system-detection-event
notification";
uses enable-notification;
uses dampening;
}
container i2nsf-traffic-flows {
description
"The container for configuring I2NSF traffic-flows
notification";
uses dampening;
uses enable-notification;
}
container i2nsf-nsf-detection-ddos {
if-feature "i2nsf-nsf-detection-ddos";
description
"The container for configuring I2NSF nsf-detection-ddos
notification";
uses enable-notification;
uses dampening;
}
container i2nsf-nsf-detection-session-table {
description
"The container for configuring I2NSF nsf-detection-session-
table notification";
uses enable-notification;
uses dampening;
}
container i2nsf-nsf-detection-intrusion {
Jeong, et al. Expires 19 August 2022 [Page 82]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
if-feature "i2nsf-nsf-detection-intrusion";
description
"The container for configuring I2NSF nsf-detection-intrusion
notification";
uses enable-notification;
uses dampening;
}
container i2nsf-nsf-detection-web-attack {
if-feature "i2nsf-nsf-detection-web-attack";
description
"The container for configuring I2NSF nsf-detection-web-attack
notification";
uses enable-notification;
uses dampening;
}
container i2nsf-nsf-system-access-log {
description
"The container for configuring I2NSF system-access-log
notification";
uses enable-notification;
uses dampening;
}
container i2nsf-system-res-util-log {
description
"The container for configuring I2NSF system-res-util-log
notification";
uses enable-notification;
uses dampening;
}
container i2nsf-system-user-activity-log {
description
"The container for configuring I2NSF system-user-activity-log
notification";
uses enable-notification;
uses dampening;
}
container i2nsf-nsf-log-dpi {
if-feature "i2nsf-nsf-log-dpi";
description
"The container for configuring I2NSF nsf-log-dpi
notification";
uses enable-notification;
uses dampening;
}
container i2nsf-counter {
description
"This is used to configure the counters
for monitoring an NSF";
Jeong, et al. Expires 19 August 2022 [Page 83]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
leaf period {
type uint16;
units "minutes";
default 0;
description
"The configuration for the period interval of reporting
the counter. If 0, then the counter period is disabled.
If value is not 0, then the counter will be reported
following the period value.";
}
}
}
}
<CODE ENDS>
Figure 2: Data Model of Monitoring
9. I2NSF Event Stream
This section discusses the NETCONF event stream for an I2NSF NSF
Monitoring subscription. The YANG module in this document supports
"ietf-subscribed-notifications" YANG module [RFC8639] for
subscription. The reserved event stream name for this document is
"I2NSF-Monitoring". The NETCONF Server (e.g., an NSF) MUST support
"I2NSF-Monitoring" event stream for an NSF data collector (e.g.,
Security Controller). The "I2NSF-Monitoring" event stream contains
all I2NSF events described in this document.
The following XML example shows the capabilities of the event streams
generated by an NSF (e.g., "NETCONF" and "I2NSF-Monitoring" event
streams) for the subscription of an NSF data collector. Refer to
[RFC5277] for more detailed explanation of Event Streams. The XML
examples in this document follow the line breaks as per [RFC8792].
Jeong, et al. Expires 19 August 2022 [Page 84]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply message-id="1"
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<data>
<netconf xmlns="urn:ietf:params:xml:ns:netmod:notification">
<streams>
<stream>
<name>NETCONF</name>
<description>Default NETCONF Event Stream</description>
<replaySupport>false</replaySupport>
</stream>
<stream>
<name>I2NSF-Monitoring</name>
<description>I2NSF Monitoring Event Stream</description>
<replaySupport>true</replaySupport>
<replayLogCreationTime>
2021-04-29T09:37:39+00:00
</replayLogCreationTime>
</stream>
</streams>
</netconf>
</data>
</rpc-reply>
Figure 3: Example of NETCONF Server supporting I2NSF-Monitoring
Event Stream
10. XML Examples for I2NSF NSF Monitoring
This section shows XML examples of I2NSF NSF Monitoring data
delivered via Monitoring Interface from an NSF. In order for the XML
data to be used correctly, the prefix (i.e., the characters before
the colon or 'nsfmi' in the example) in the content of the element
that uses the "identityref" type (e.g., /i2nsf-event/i2nsf-system-
detection-alarm/alarm-category/) in the YANG module described in this
document MUST be the same as the namespace prefix (i.e., 'nsfmi' in
the example) for urn:ietf:params:xml:ns:yang:ietf-i2nsf-nsf-
monitoring. Therefore, XML software MUST be chosen that makes the
namespace prefix information available.
10.1. I2NSF System Detection Alarm
The following example shows an alarm triggered by Memory Usage on the
server; this example XML file is delivered by an NSF to an NSF data
collector:
Jeong, et al. Expires 19 August 2022 [Page 85]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
<?xml version="1.0" encoding="UTF-8"?>
<notification
xmlns="urn:ietf:params:xml:ns:netconf:notification:1.0">
<eventTime>2021-04-29T07:43:52.181088+00:00</eventTime>
<i2nsf-event
xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-nsf-monitoring">
<i2nsf-system-detection-alarm>
<alarm-category
xmlns:nsfmi="urn:ietf:params:xml:ns:yang:\
ietf-i2nsf-nsf-monitoring">
nsfmi:memory-alarm
</alarm-category>
<acquisition-method
xmlns:nsfmi="urn:ietf:params:xml:ns:yang:\
ietf-i2nsf-nsf-monitoring">
nsfmi:subscription
</acquisition-method>
<emission-type
xmlns:nsfmi="urn:ietf:params:xml:ns:yang:\
ietf-i2nsf-nsf-monitoring">
nsfmi:on-change
</emission-type>
<dampening-type
xmlns:nsfmi="urn:ietf:params:xml:ns:yang:\
ietf-i2nsf-nsf-monitoring">
nsfmi:on-repetition
</dampening-type>
<usage>91</usage>
<threshold>90</threshold>
<message>Memory Usage Exceeded the Threshold</message>
<nsf-name>time_based_firewall</nsf-name>
<severity>high</severity>
</i2nsf-system-detection-alarm>
</i2nsf-event>
</notification>
Figure 4: Example of I2NSF System Detection Alarm triggered by
Memory Usage
The XML data above shows:
1. The NSF that sends the information is named
"time_based_firewall".
2. The memory usage of the NSF triggered the alarm.
3. The monitoring information is received by subscription method.
Jeong, et al. Expires 19 August 2022 [Page 86]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
4. The monitoring information is emitted "on-change".
5. The monitoring information is dampened "on-repetition".
6. The memory usage of the NSF is 91 percent.
7. The memory threshold to trigger the alarm is 90 percent.
8. The severity level of the notification is high.
10.2. I2NSF Interface Counters
To get the I2NSF system interface counters information by query,
NETCONF Client (e.g., NSF data collector) needs to initiate GET
connection with NETCONF Server (e.g., NSF). The following XML file
can be used to get the state data and filter the information.
<?xml version="1.0" encoding="UTF-8"?>
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
<get>
<filter
xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-nsf-monitoring">
<i2nsf-counters>
<system-interface/>
</i2nsf-counters>
</filter>
</get>
</rpc>
Figure 5: XML Example for NETCONF GET with System Interface Filter
The following XML file shows the reply from the NETCONF Server (e.g.,
NSF):
Jeong, et al. Expires 19 August 2022 [Page 87]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply message-id="1"
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<data>
<i2nsf-counters
xmlns="urn:ietf:params:xml:ns:yang:ietf-i2nsf-nsf-monitoring">
<system-interface>
<discontinuity-time>
2021-04-29T08:43:52.181088+00:00
</discontinuity-time>
<interface-name>ens3</interface-name>
<acquisition-method
xmlns:nsfmi="urn:ietf:params:xml:ns:yang:\
ietf-i2nsf-nsf-monitoring">
nsfmi:query
</acquisition-method>
<in-total-traffic-bytes>549050</in-total-traffic-bytes>
<out-total-traffic-bytes>814956</out-total-traffic-bytes>
<in-drop-traffic-bytes>0</in-drop-traffic-bytes>
<out-drop-traffic-bytes>5078</out-drop-traffic-bytes>
<nsf-name>time_based_firewall</nsf-name>
</system-interface>
<system-interface>
<discontinuity-time>
2021-04-29T08:43:52.181088+00:00
</discontinuity-time>
<interface-name>lo</interface-name>
<acquisition-method
xmlns:nsfmi="urn:ietf:params:xml:ns:yang:\
ietf-i2nsf-nsf-monitoring">
nsfmi:query
</acquisition-method>
<in-total-traffic-bytes>48487</in-total-traffic-bytes>
<out-total-traffic-bytes>48487</out-total-traffic-bytes>
<in-drop-traffic-bytes>0</in-drop-traffic-bytes>
<out-drop-traffic-bytes>0</out-drop-traffic-bytes>
<nsf-name>time_based_firewall</nsf-name>
</system-interface>
</i2nsf-counters>
</data>
</rpc-reply>
Figure 6: Example of I2NSF System Interface Counters XML Information
Jeong, et al. Expires 19 August 2022 [Page 88]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
11. IANA Considerations
This document requests IANA to register the following URI in the
"IETF XML Registry" [RFC3688]:
URI: urn:ietf:params:xml:ns:yang:ietf-i2nsf-nsf-monitoring
Registrant Contact: The IESG.
XML: N/A; the requested URI is an XML namespace.
This document requests IANA to register the following YANG module in
the "YANG Module Names" registry [RFC7950][RFC8525]:
name: ietf-i2nsf-nsf-monitoring
namespace: urn:ietf:params:xml:ns:yang:ietf-i2nsf-nsf-monitoring
prefix: nsfmi
reference: RFC XXXX
// RFC Ed.: replace XXXX with an actual RFC number and remove
// this note.
12. Security Considerations
The YANG module described in this document defines a schema for data
that is designed to be accessed via network management protocols such
as NETCONF [RFC6241] or RESTCONF [RFC8040]. The lowest NETCONF layer
is the secure transport layer, and the required secure transport is
Secure Shell (SSH) [RFC6242]. The lowest RESTCONF layer is HTTPS,
and the required secure transport is TLS [RFC8446].
The NETCONF access control model [RFC8341] provides a means of
restricting access by specific NETCONF or RESTCONF users to a
preconfigured subset of all available NETCONF or RESTCONF protocol
operations and content.
All data nodes defined in the YANG module which can be created,
modified and deleted (i.e., config true, which is the default) are
considered sensitive as they all could potentially impact security
monitoring and mitigation activities. Write operations (e.g., edit-
config) applied to these data nodes without proper protection could
result in missed alarms or incorrect alarms information being
returned to the NSF data collector. The following are threats that
need to be considered and mitigated:
Compromised NSF with valid credentials: It can send falsified
Jeong, et al. Expires 19 August 2022 [Page 89]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
information to the NSF data collector to mislead detection or
mitigation activities; and/or to hide activity. Currently, there
is no in-framework mechanism to mitigate this and it is an issue
for all monitoring infrastructures. It is important to keep
confidential information from unauthorized persons to mitigate the
possibility of compromising the NSF with this information.
Compromised NSF data collector with valid credentials: It has
visibility to all collected security alarms; the entire detection
and mitigation infrastructure may be suspect. It is important to
keep confidential information from unauthorized persons to
mitigate the possibility of compromising the NSF with this
information.
Impersonating NSF: This involves a system trying to send false
information while imitating an NSF; client authentication would
help the NSF data collector to identify this invalid NSF in the
"push" model (NSF-to-collector), while the "pull" model
(collector-to-NSF) should already be addressed with the
authentication.
Impersonating NSF data collector: This is a rogue NSF data collector
with which a legitimate NSF is tricked into communicating; for
"push" model (NSF-to-collector), it is important to have valid
credentials, without which it should not work; for "pull" model
(collector-to-NSF), mutual authentication should be used to
mitigate the threat.
In addition, to defend against the DDoS attack caused by a lot of
NSFs sending massive notifications to the NSF data collector, the
rate limiting or similar mechanisms should be considered in both an
NSF and NSF data collector, whether in advance or just in the process
of DDoS attack.
All of the readable data nodes in this YANG module may be considered
sensitive in some network environments. These data nodes represent
information consistent with the logging commonly performed in network
and security operations. They may reveal the specific configuration
of a network; vulnerabilities in specific systems; and the deployed
security controls and their relative efficacy in detecting or
mitigating an attack. To an attacker, this information could inform
how to (further) compromise the network, evade detection, or confirm
whether they have been observed by the network operator.
Jeong, et al. Expires 19 August 2022 [Page 90]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
Additionally, many of the data nodes in this YANG module such as
containers "i2nsf-system-user-activity-log", "i2nsf-system-detection-
event", and "i2nsf-nsf-detection-voip-vocn" are privacy sensitive.
They may describe specific or aggregate user activity including
associating user names with specific IP addresses; or users with
specific network usage.
13. Acknowledgments
This document is a product by the I2NSF Working Group (WG) including
WG Chairs (i.e., Linda Dunbar and Yoav Nir) and Diego Lopez. This
document took advantage of the review and comments from the following
people: Roman Danyliw, Tim Bray (IANA), Kyle Rose (TSV-ART), Dale R.
Worley (Gen-ART), Melinda Shore (SecDir), Valery Smyslov (ART-ART),
and Tom Petch. The authors sincerely appreciate their sincere
efforts and kind help.
This work was supported by Institute of Information & Communications
Technology Planning & Evaluation (IITP) grant funded by the Korea
MSIT (Ministry of Science and ICT) (R-20160222-002755, Cloud based
Security Intelligence Technology Development for the Customized
Security Service Provisioning). This work was supported in part by
the IITP (2020-0-00395, Standard Development of Blockchain based
Network Management Automation Technology). This work was supported
in part by the MSIT under the Information Technology Research Center
(ITRC) support program (IITP-2021-2017-0-01633) supervised by the
IITP.
14. Contributors
The following are co-authors of this document:
Chaehong Chung - Department of Electronic, Electrical and Computer
Engineering, Sungkyunkwan University, 2066 Seobu-ro Jangan-gu, Suwon,
Gyeonggi-do 16419, Republic of Korea, Email: darkhong@skku.edu
Jinyong (Tim) Kim - Department of Electronic, Electrical and Computer
Engineering, Sungkyunkwan University, 2066 Seobu-ro Jangan-gu, Suwon,
Gyeonggi-do 16419, Republic of Korea, Email: timkim@skku.edu
Dongjin Hong - Department of Electronic, Electrical and Computer
Engineering, Sungkyunkwan University, 2066 Seobu-ro Jangan-gu, Suwon,
Gyeonggi-do 16419, Republic of Korea, Email: dong.jin@skku.edu
Dacheng Zhang - Huawei, Email: dacheng.zhang@huawei.com
Yi Wu - Aliababa Group, Email: anren.wy@alibaba-inc.com
Jeong, et al. Expires 19 August 2022 [Page 91]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
Rakesh Kumar - Juniper Networks, 1133 Innovation Way, Sunnyvale, CA
94089, USA, Email: rkkumar@juniper.net
Anil Lohiya - Juniper Networks, Email: alohiya@juniper.net
15. References
15.1. Normative References
[RFC0768] Postel, J., "User Datagram Protocol", STD 6, RFC 768,
DOI 10.17487/RFC0768, August 1980,
<https://www.rfc-editor.org/info/rfc768>.
[RFC0791] Postel, J., "Internet Protocol", STD 5, RFC 791,
DOI 10.17487/RFC0791, September 1981,
<https://www.rfc-editor.org/info/rfc791>.
[RFC0792] Postel, J., "Internet Control Message Protocol", STD 5,
RFC 792, DOI 10.17487/RFC0792, September 1981,
<https://www.rfc-editor.org/info/rfc792>.
[RFC0793] Postel, J., "Transmission Control Protocol", STD 7,
RFC 793, DOI 10.17487/RFC0793, September 1981,
<https://www.rfc-editor.org/info/rfc793>.
[RFC0854] Postel, J. and J. Reynolds, "Telnet Protocol
Specification", STD 8, RFC 854, DOI 10.17487/RFC0854, May
1983, <https://www.rfc-editor.org/info/rfc854>.
[RFC0959] Postel, J. and J. Reynolds, "File Transfer Protocol",
STD 9, RFC 959, DOI 10.17487/RFC0959, October 1985,
<https://www.rfc-editor.org/info/rfc959>.
[RFC1939] Myers, J. and M. Rose, "Post Office Protocol - Version 3",
STD 53, RFC 1939, DOI 10.17487/RFC1939, May 1996,
<https://www.rfc-editor.org/info/rfc1939>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC2595] Newman, C., "Using TLS with IMAP, POP3 and ACAP",
RFC 2595, DOI 10.17487/RFC2595, June 1999,
<https://www.rfc-editor.org/info/rfc2595>.
Jeong, et al. Expires 19 August 2022 [Page 92]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
DOI 10.17487/RFC3688, January 2004,
<https://www.rfc-editor.org/info/rfc3688>.
[RFC3877] Chisholm, S. and D. Romascanu, "Alarm Management
Information Base (MIB)", RFC 3877, DOI 10.17487/RFC3877,
September 2004, <https://www.rfc-editor.org/info/rfc3877>.
[RFC4340] Kohler, E., Handley, M., and S. Floyd, "Datagram
Congestion Control Protocol (DCCP)", RFC 4340,
DOI 10.17487/RFC4340, March 2006,
<https://www.rfc-editor.org/info/rfc4340>.
[RFC4443] Conta, A., Deering, S., and M. Gupta, Ed., "Internet
Control Message Protocol (ICMPv6) for the Internet
Protocol Version 6 (IPv6) Specification", STD 89,
RFC 4443, DOI 10.17487/RFC4443, March 2006,
<https://www.rfc-editor.org/info/rfc4443>.
[RFC5277] Chisholm, S. and H. Trevino, "NETCONF Event
Notifications", RFC 5277, DOI 10.17487/RFC5277, July 2008,
<https://www.rfc-editor.org/info/rfc5277>.
[RFC5321] Klensin, J., "Simple Mail Transfer Protocol", RFC 5321,
DOI 10.17487/RFC5321, October 2008,
<https://www.rfc-editor.org/info/rfc5321>.
[RFC5646] Phillips, A., Ed. and M. Davis, Ed., "Tags for Identifying
Languages", BCP 47, RFC 5646, DOI 10.17487/RFC5646,
September 2009, <https://www.rfc-editor.org/info/rfc5646>.
[RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
and A. Bierman, Ed., "Network Configuration Protocol
(NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
<https://www.rfc-editor.org/info/rfc6241>.
[RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure
Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011,
<https://www.rfc-editor.org/info/rfc6242>.
[RFC6265] Barth, A., "HTTP State Management Mechanism", RFC 6265,
DOI 10.17487/RFC6265, April 2011,
<https://www.rfc-editor.org/info/rfc6265>.
[RFC6991] Schoenwaelder, J., Ed., "Common YANG Data Types",
RFC 6991, DOI 10.17487/RFC6991, July 2013,
<https://www.rfc-editor.org/info/rfc6991>.
Jeong, et al. Expires 19 August 2022 [Page 93]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
[RFC7011] Claise, B., Ed., Trammell, B., Ed., and P. Aitken,
"Specification of the IP Flow Information Export (IPFIX)
Protocol for the Exchange of Flow Information", STD 77,
RFC 7011, DOI 10.17487/RFC7011, September 2013,
<https://www.rfc-editor.org/info/rfc7011>.
[RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
RFC 7950, DOI 10.17487/RFC7950, August 2016,
<https://www.rfc-editor.org/info/rfc7950>.
[RFC8040] Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
<https://www.rfc-editor.org/info/rfc8040>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8200] Deering, S. and R. Hinden, "Internet Protocol, Version 6
(IPv6) Specification", STD 86, RFC 8200,
DOI 10.17487/RFC8200, July 2017,
<https://www.rfc-editor.org/info/rfc8200>.
[RFC8329] Lopez, D., Lopez, E., Dunbar, L., Strassner, J., and R.
Kumar, "Framework for Interface to Network Security
Functions", RFC 8329, DOI 10.17487/RFC8329, February 2018,
<https://www.rfc-editor.org/info/rfc8329>.
[RFC8340] Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams",
BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018,
<https://www.rfc-editor.org/info/rfc8340>.
[RFC8341] Bierman, A. and M. Bjorklund, "Network Configuration
Access Control Model", STD 91, RFC 8341,
DOI 10.17487/RFC8341, March 2018,
<https://www.rfc-editor.org/info/rfc8341>.
[RFC8342] Bjorklund, M., Schoenwaelder, J., Shafer, P., Watsen, K.,
and R. Wilton, "Network Management Datastore Architecture
(NMDA)", RFC 8342, DOI 10.17487/RFC8342, March 2018,
<https://www.rfc-editor.org/info/rfc8342>.
[RFC8343] Bjorklund, M., "A YANG Data Model for Interface
Management", RFC 8343, DOI 10.17487/RFC8343, March 2018,
<https://www.rfc-editor.org/info/rfc8343>.
Jeong, et al. Expires 19 August 2022 [Page 94]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
[RFC8407] Bierman, A., "Guidelines for Authors and Reviewers of
Documents Containing YANG Data Models", BCP 216, RFC 8407,
DOI 10.17487/RFC8407, October 2018,
<https://www.rfc-editor.org/info/rfc8407>.
[RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol
Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
<https://www.rfc-editor.org/info/rfc8446>.
[RFC8525] Bierman, A., Bjorklund, M., Schoenwaelder, J., Watsen, K.,
and R. Wilton, "YANG Library", RFC 8525,
DOI 10.17487/RFC8525, March 2019,
<https://www.rfc-editor.org/info/rfc8525>.
[RFC8639] Voit, E., Clemm, A., Gonzalez Prieto, A., Nilsen-Nygaard,
E., and A. Tripathy, "Subscription to YANG Notifications",
RFC 8639, DOI 10.17487/RFC8639, September 2019,
<https://www.rfc-editor.org/info/rfc8639>.
[RFC8641] Clemm, A. and E. Voit, "Subscription to YANG Notifications
for Datastore Updates", RFC 8641, DOI 10.17487/RFC8641,
September 2019, <https://www.rfc-editor.org/info/rfc8641>.
[RFC9051] Melnikov, A., Ed. and B. Leiba, Ed., "Internet Message
Access Protocol (IMAP) - Version 4rev2", RFC 9051,
DOI 10.17487/RFC9051, August 2021,
<https://www.rfc-editor.org/info/rfc9051>.
[I-D.ietf-httpbis-http2bis]
Thomson, M. and C. Benfield, "HTTP/2", Work in Progress,
Internet-Draft, draft-ietf-httpbis-http2bis-07, 24 January
2022, <https://www.ietf.org/archive/id/draft-ietf-httpbis-
http2bis-07.txt>.
[I-D.ietf-httpbis-messaging]
Fielding, R. T., Nottingham, M., and J. Reschke,
"HTTP/1.1", Work in Progress, Internet-Draft, draft-ietf-
httpbis-messaging-19, 12 September 2021,
<https://www.ietf.org/archive/id/draft-ietf-httpbis-
messaging-19.txt>.
[I-D.ietf-httpbis-semantics]
Fielding, R. T., Nottingham, M., and J. Reschke, "HTTP
Semantics", Work in Progress, Internet-Draft, draft-ietf-
httpbis-semantics-19, 12 September 2021,
<https://www.ietf.org/archive/id/draft-ietf-httpbis-
semantics-19.txt>.
Jeong, et al. Expires 19 August 2022 [Page 95]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
[I-D.ietf-i2nsf-capability-data-model]
Hares, S., Jeong, J. (., Kim, J. (., Moskowitz, R., and Q.
Lin, "I2NSF Capability YANG Data Model", Work in Progress,
Internet-Draft, draft-ietf-i2nsf-capability-data-model-26,
10 February 2022, <https://www.ietf.org/archive/id/draft-
ietf-i2nsf-capability-data-model-26.txt>.
[I-D.ietf-i2nsf-nsf-facing-interface-dm]
Kim, J. (., Jeong, J. (., Park, J., Hares, S., and Q. Lin,
"I2NSF Network Security Function-Facing Interface YANG
Data Model", Work in Progress, Internet-Draft, draft-ietf-
i2nsf-nsf-facing-interface-dm-20, 31 January 2022,
<https://www.ietf.org/archive/id/draft-ietf-i2nsf-nsf-
facing-interface-dm-20.txt>.
[I-D.ietf-tcpm-rfc793bis]
Eddy, W. M., "Transmission Control Protocol (TCP)
Specification", Work in Progress, Internet-Draft, draft-
ietf-tcpm-rfc793bis-26, 8 February 2022,
<https://www.ietf.org/archive/id/draft-ietf-tcpm-
rfc793bis-26.txt>.
[I-D.ietf-tsvwg-rfc4960-bis]
Stewart, R. R., Tüxen, M., and K. E. E. Nielsen, "Stream
Control Transmission Protocol", Work in Progress,
Internet-Draft, draft-ietf-tsvwg-rfc4960-bis-18, 16
January 2022, <https://www.ietf.org/archive/id/draft-ietf-
tsvwg-rfc4960-bis-18.txt>.
15.2. Informative References
[RFC4949] Shirey, R., "Internet Security Glossary, Version 2",
FYI 36, RFC 4949, DOI 10.17487/RFC4949, August 2007,
<https://www.rfc-editor.org/info/rfc4949>.
[RFC8792] Watsen, K., Auerswald, E., Farrel, A., and Q. Wu,
"Handling Long Lines in Content of Internet-Drafts and
RFCs", RFC 8792, DOI 10.17487/RFC8792, June 2020,
<https://www.rfc-editor.org/info/rfc8792>.
[I-D.ietf-i2nsf-consumer-facing-interface-dm]
Jeong, J. (., Chung, C., Ahn, T., Kumar, R., and S. Hares,
"I2NSF Consumer-Facing Interface YANG Data Model", Work in
Progress, Internet-Draft, draft-ietf-i2nsf-consumer-
facing-interface-dm-16, 28 January 2022,
<https://www.ietf.org/archive/id/draft-ietf-i2nsf-
consumer-facing-interface-dm-16.txt>.
Jeong, et al. Expires 19 August 2022 [Page 96]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
[IANA-HTTP-Status-Code]
Internet Assigned Numbers Authority (IANA), "Hypertext
Transfer Protocol (HTTP) Status Code Registry", September
2018, <https://www.iana.org/assignments/http-status-codes/
http-status-codes.xhtml>.
[IANA-Media-Types]
Internet Assigned Numbers Authority (IANA), "Media Types",
August 2021, <https://www.iana.org/assignments/media-
types/media-types.xhtml>.
Appendix A. Changes from draft-ietf-i2nsf-nsf-monitoring-data-model-14
The following changes are made from draft-ietf-i2nsf-nsf-monitoring-
data-model-14:
* This version is added to update the references.
Authors' Addresses
Jaehoon (Paul) Jeong (editor)
Department of Computer Science and Engineering
Sungkyunkwan University
2066 Seobu-Ro, Jangan-Gu
Suwon
Gyeonggi-Do
16419
Republic of Korea
Phone: +82 31 299 4957
Email: pauljeong@skku.edu
URI: http://iotlab.skku.edu/people-jaehoon-jeong.php
Patrick Lingga
Department of Electrical and Computer Engineering
Sungkyunkwan University
2066 Seobu-Ro, Jangan-Gu
Suwon
Gyeonggi-Do
16419
Republic of Korea
Phone: +82 31 299 4957
Email: patricklink@skku.edu
Jeong, et al. Expires 19 August 2022 [Page 97]
Internet-Draft NSF Monitoring Interface YANG Data Model February 2022
Susan Hares
Huawei
7453 Hickory Hill
Saline, MI 48176
United States of America
Phone: +1-734-604-0332
Email: shares@ndzh.com
Liang (Frank) Xia
Huawei
101 Software Avenue, Yuhuatai District
Nanjing
Jiangsu,
China
Email: Frank.xialiang@huawei.com
Henk Birkholz
Fraunhofer Institute for Secure Information Technology
Rheinstrasse 75
64295 Darmstadt
Germany
Email: henk.birkholz@sit.fraunhofer.de
Jeong, et al. Expires 19 August 2022 [Page 98]