OAuth                                                     J. Richer, Ed.
Internet-Draft                                     The MITRE Corporation
Intended status: Standards Track                           W. Mills, Ed.
Expires: May 30, 2013                                        Yahoo! Inc.
                                                      H. Tschofenig, Ed.
                                                  Nokia Siemens Networks
                                                       November 28, 2012

           OAuth 2.0 Message Authentication Code (MAC) Tokens
                    draft-ietf-oauth-v2-http-mac-02

Abstract

   This document specifies the HTTP MAC access authentication scheme, an
   HTTP authentication method using a message authentication code (MAC)
   algorithm to provide cryptographic verification of portions of HTTP
   requests.  The document also defines an OAuth 2.0 binding for use as
   an access token type.

   NOTE: This document (and other OAuth 2.0 security documents, such as
   [I-D.tschofenig-oauth-hotk]) are still work in progress in the OAuth
   working group.  As such, the content of this document may change.
   For a discussion about security requirements please consult [I-D
   .tschofenig-oauth-security].  Your input on the detailed security
   requirements is highly appreciated.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on May 30, 2013.

Copyright Notice

   Copyright (c) 2012 IETF Trust and the persons identified as the
   document authors.  All rights reserved.






Richer, Mills & TschofenigExpires May 30, 2013                  [Page 1]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012


   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (http://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.  Code Components
   extracted from this document must include Simplified BSD License text
   as described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Simplified BSD License.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  2
     1.1.  Example  . . . . . . . . . . . . . . . . . . . . . . . . .  3
     1.2.  Notational Conventions . . . . . . . . . . . . . . . . . .  5
   2.  Issuing MAC Credentials  . . . . . . . . . . . . . . . . . . .  5
   3.  Making Requests  . . . . . . . . . . . . . . . . . . . . . . .  6
     3.1.  The "Authorization" Request Header . . . . . . . . . . . .  6
     3.2.  Request MAC  . . . . . . . . . . . . . . . . . . . . . . .  7
       3.2.1.  Normalized Request String  . . . . . . . . . . . . . .  7
       3.2.2.  hmac-sha-1 . . . . . . . . . . . . . . . . . . . . . .  8
       3.2.3.  hmac-sha-256 . . . . . . . . . . . . . . . . . . . . .  9
   4.  Verifying Requests . . . . . . . . . . . . . . . . . . . . . .  9
     4.1.  Timestamp Verification . . . . . . . . . . . . . . . . . .  9
     4.2.  The "WWW-Authenticate" Response Header Field . . . . . . . 10
   5.  Use with OAuth 2.0 . . . . . . . . . . . . . . . . . . . . . . 11
     5.1.  Issuing MAC-Type Access Tokens . . . . . . . . . . . . . . 11
   6.  Security Considerations  . . . . . . . . . . . . . . . . . . . 12
     6.1.  MAC Keys Transmission  . . . . . . . . . . . . . . . . . . 12
     6.2.  Confidentiality of Requests  . . . . . . . . . . . . . . . 12
     6.3.  Spoofing by Counterfeit Servers  . . . . . . . . . . . . . 12
     6.4.  Plaintext Storage of Credentials . . . . . . . . . . . . . 12
     6.5.  Entropy of MAC Keys  . . . . . . . . . . . . . . . . . . . 13
     6.6.  Denial of Service / Resource Exhaustion Attacks  . . . . . 13
     6.7.  Timing Attacks . . . . . . . . . . . . . . . . . . . . . . 14
     6.8.  CSRF Attacks . . . . . . . . . . . . . . . . . . . . . . . 14
     6.9.  Coverage Limitations . . . . . . . . . . . . . . . . . . . 14
   7.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 15
     7.1.  The HTTP MAC Authentication Scheme Algorithm Registry  . . 15
       7.1.1.  Registration Template  . . . . . . . . . . . . . . . . 15
       7.1.2.  Initial Registry Contents  . . . . . . . . . . . . . . 16
     7.2.  OAuth Access Token Type Registration . . . . . . . . . . . 16
       7.2.1.  The "mac" OAuth Access Token Type  . . . . . . . . . . 16
     7.3.  OAuth Parameters Registration  . . . . . . . . . . . . . . 17
       7.3.1.  The "mac_key" OAuth Parameter  . . . . . . . . . . . . 17
       7.3.2.  The "mac_algorithm" OAuth Parameter  . . . . . . . . . 17
   8.  Contributors . . . . . . . . . . . . . . . . . . . . . . . . . 17
   9.  Acknowledgments  . . . . . . . . . . . . . . . . . . . . . . . 17
   10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 17
     10.1.  Normative References  . . . . . . . . . . . . . . . . . . 17
     10.2.  Informative References  . . . . . . . . . . . . . . . . . 18
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 19

1.  Introduction

Richer, Mills & TschofenigExpires May 30, 2013                  [Page 2]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012


   This specification defines the HTTP MAC access authentication scheme,
   providing a method for making authenticated HTTP requests with
   partial cryptographic verification of the request, covering the HTTP
   method, request URI, and host.

   Similar to the HTTP Basic access authentication scheme [RFC2617], the
   MAC scheme utilizes a set of client credentials which include an
   identifier and key.  However, in contrast with the Basic scheme, the
   key is never included in authenticated requests but is used to
   calculate the request MAC value which is included instead.

   The MAC scheme requires the establishment of a shared symmetric key
   between the client and the server.  This specification offers one
   such method for issuing a set of MAC credentials to the client using
   OAuth 2.0 in the form of a MAC-type access token.

   The primary design goal of this mechanism is to simplify and improve
   HTTP authentication for services that are unwilling or unable to
   employ TLS for every request.  In particular, this mechanism leverage
   an initial TLS setup phase to establish a shared secret between the
   client and the server.  The shared secret is then used over an
   insecure channel to provide protection against a passive network
   attacker.

   In particular, when a server uses this mechanism, a passive network
   attacker will be unable to "steal" the user's session token, as is
   possible today with cookies and other bearer tokens.  In addition,
   this mechanism helps secure the session token against leakage when
   sent over a secure channel to the wrong server.  For example, when
   the client uses some form of dynamic configuration to determine where
   to send an authenticated request, or when the client fails to
   properly validate the server's identity as part of its TLS handshake.

   Unlike the HTTP Digest authentication scheme, this mechanism does not
   require interacting with the server to prevent replay attacks.
   Instead, the client provides both a nonce and a timestamp, which the
   server can use to prevent replay attacks using a bounded amount of
   storage.  Also unlike Digest, this mechanism is not intended to
   protect the user's password itself because the client and server both
   have access to the key material in the clear.  Instead, servers
   should issue a short-lived derivative credential for this mechanism
   during the initial TLS setup phase.

1.1.  Example

   The client attempts to access a protected resource without
   authentication, making the following HTTP request to the resource
   server:


     GET /resource/1?b=1&a=2 HTTP/1.1
     Host: example.com


Richer, Mills & TschofenigExpires May 30, 2013                  [Page 3]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012



   The resource server returns the following authentication challenge:


     HTTP/1.1 401 Unauthorized
     WWW-Authenticate: MAC


   The client has previously obtained a set of MAC credentials for
   accessing resources on the "http://example.com/" server.  The MAC
   credentials issued to the client include the following attributes:

   MAC key identifier: h480djs93hd8

   MAC key: 489dks293j39

   MAC algorithm: hmac-sha-1

   The client constructs the authentication header by calculating a
   timestamp (e.g.  the number of seconds since January 1, 1970 00:00:00
   GMT) and generating a random string used as a nonce:

   Timestamp: 1336363200

   Nonce: dj83hs9s

   The client constructs the normalized request string (the new line
   separator character is represented by "\n" for display purposes only;
   the trailing new line separator signify that no extension value is
   included with the request, explained below):


     1336363200\n
     dj83hs9s\n
     GET\n
     /resource/1?b=1&a=2\n
     example.com\n
     80\n
     \n


   The request MAC is calculated using the specified MAC algorithm
   "hmac-sha-1" and the MAC key over the normalized request string.  The
   result is base64-encoded to produce the request MAC:


     bhCQXTVyfj5cmA9uKkPFx1zeOXM=


   The client includes the MAC key identifier, nonce, and request MAC




Richer, Mills & TschofenigExpires May 30, 2013                  [Page 4]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012

   with the request using the "Authorization" request header field:


     GET /resource/1?b=1&a=2 HTTP/1.1
     Host: example.com
     Authorization: MAC id="h480djs93hd8",
                        ts="1336363200",
                        nonce="dj83hs9s",
                        mac="bhCQXTVyfj5cmA9uKkPFx1zeOXM="


   The server validates the request by calculating the request MAC again
   based on the request received and verifies the validity and scope of
   the MAC credentials.  If valid, the server responds with the
   requested resource representation.

1.2.  Notational Conventions

   The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL NOT',
   'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'MAY', and 'OPTIONAL' in this
   specification are to be interpreted as described in [RFC2119].

   This specification uses the Augmented Backus-Naur Form (ABNF)
   notation of [I-D.ietf-httpbis-p1-messaging].  Additionally, the
   following rules are included from [RFC2617]: auth-param.

2.  Issuing MAC Credentials

   This specification provides one method for issuing MAC credentials
   using OAuth 2.0 as described in Section 5. This specification does
   not mandate servers to support any particular method for issuing MAC
   credentials, and other methods MAY be defined and used.  Whenever MAC
   credentials are issued, the credentials MUST include the following
   attributes:

   MAC key identifier
         A string identifying the MAC key used to calculate the request
         MAC. The string is usually opaque to the client.  The server
         typically assigns a specific scope and lifetime to each set of
         MAC credentials.  The identifier MAY denote a unique value used
         to retrieve the authorization information (e.g.  from a
         database), or self-contain the authorization information in a
         verifiable manner (i.e.  a string consisting of some data and a
         signature).

   MAC key
         A shared symmetric secret used as the MAC algorithm key.  The
         server MUST NOT reissue a previously issued MAC key and MAC key
         identifier combination.

   MAC algorithm




Richer, Mills & TschofenigExpires May 30, 2013                  [Page 5]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012

         A MAC algorithm used to calculate the request MAC. Value MUST
         be one of "hmac-sha-1", "hmac-sha-256", or a registered
         extension algorithm name as described in Section 7.1.
         Algorithm names are case-sensitive.  If the MAC algorithm is
         not understood by the client, the client MUST NOT use the MAC
         credentials and continue as if no MAC credentials were issued.

   The MAC key identifier, MAC key, MAC algorithm strings MUST NOT
   include characters other than:


     %x20-21 / %x23-5B / %x5D-7E
     ; Any printable ASCII character except for <"> and <\>


3.  Making Requests

   To make authenticated requests, the client must be in the possession
   of a valid set of MAC credentials accepted by the server.  The client
   constructs the request by calculating a set of attributes, and adding
   them to the HTTP request using the "Authorization" request header
   field as described in Section 3.1.

3.1.  The "Authorization" Request Header

   The "Authorization" request header field uses the framework defined
   by [RFC2617] as follows:


     credentials    = "MAC" 1*SP #params

     params         = id / ts / nonce / ext / mac

     id             = "id" "=" string-value
     ts             = "ts" "=" ( <"> timestamp <"> ) / timestamp
     nonce          = "nonce" "=" string-value
     ext            = "ext" "=" string-value
     mac            = "mac" "=" string-value

     timestamp      = 1*DIGIT
     string-value   = ( <"> plain-string <"> ) / plain-string
     plain-string   = 1*( %x20-21 / %x23-5B / %x5D-7E )


   The header attributes are set as follows:

   id
         REQUIRED. The MAC key identifier.

   ts





Richer, Mills & TschofenigExpires May 30, 2013                  [Page 6]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012

         REQUIRED. The request timestamp.  The value MUST be a positive
         integer set by the client when making each request to the
         number of seconds elapsed from a fixed point in time (e.g.
         January 1, 1970 00:00:00 GMT). The value MUST NOT include
         leading zeros (e.g.  "000273154346").

   nonce
         REQUIRED. A unique string generated by the client.  The value
         MUST be unique across all requests with the same timestamp and
         MAC key identifier combination.

   ext
         OPTIONAL. A string used to include additional information which
         is covered by the request MAC. The content and format of the
         string is beyond the scope of this specification.

   mac
         REQUIRED. The HTTP request MAC as described in Section 3.2.

   Attributes MUST NOT appear more than once.  Attribute values are
   limited to a subset of ASCII, which does not require escaping, as
   defined by the plain-string ABNF.

3.2.  Request MAC

   The client uses the MAC algorithm and the MAC key to calculate the
   request MAC. This specification defines two algorithms: "hmac-sha-1"
   and "hmac-sha-256", and provides an extension registry for additional
   algorithms.

3.2.1.  Normalized Request String

   The normalized request string is a consistent, reproducible
   concatenation of several of the HTTP request elements into a single
   string.  By normalizing the request into a reproducible string, the
   client and server can both calculate the request MAC over the exact
   same value.

   The string is constructed by concatenating together, in order, the
   following HTTP request elements, each followed by a new line
   character (%x0A):

   1.  The timestamp value calculated for the request.

   2.  The nonce value generated for the request.

   3.  The HTTP request method in upper case.  For example: "HEAD",
       "GET", "POST", etc.

   4.  The HTTP request-URI as defined by [RFC2616] section 5.1.2.

   5.  The hostname included in the HTTP request using the "Host"



Richer, Mills & TschofenigExpires May 30, 2013                  [Page 7]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012

       request header field in lower case.

   6.  The port as included in the HTTP request using the "Host" request
       header field.  If the header field does not include a port, the
       default value for the scheme MUST be used (e.g.  80 for HTTP and
       443 for HTTPS).

   7.  The value of the "ext" "Authorization" request header field
       attribute if one was included in the request, otherwise, an empty
       string.

   Each element is followed by a new line character (%x0A) including the
   last element and even when an element value is an empty string.

   For example, the HTTP request:


     POST /request?b5=%3D%253D&a3=a&c%40=&a2=r%20b&c2&a3=2+q HTTP/1.1
     Host: example.com

     Hello World!


   using timestamp "264095:7d8f3e4a", nonce "7d8f3e4a", and extension
   string "a,b,c" is normalized into the following string (the new line
   separator character is represented by "\n" for display purposes
   only):


     264095\n
     7d8f3e4a\n
     POST\n
     /request?b5=%3D%253D&a3=a&c%40=&a2=r%20b&c2&a3=2+q\n
     example.com\n
     80\n
     a,b,c\n


3.2.2.  hmac-sha-1

   "hmac-sha-1" uses the HMAC-SHA1 algorithm as defined in [RFC2104]:


     mac = HMAC-SHA1 (key, text)


   Where:

   text
         is set to the value of the normalized request string as





Richer, Mills & TschofenigExpires May 30, 2013                  [Page 8]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012

         described in Section 3.2.1,

   key
         is set to the MAC key provided by the server, and

   mac
         is used to set the value of the "mac" attribute, after the
         result octet string is base64-encoded per [RFC2045] section
         6.8.

3.2.3.  hmac-sha-256

   "hmac-sha-256" uses the HMAC algorithm as defined in [RFC2104]
   together with the SHA-256 hash function defined in [NIST-FIPS-180-3]:


     mac = HMAC-SHA256 (key, text)


   Where:

   text
         is set to the value of the normalize request string as
         described in Section 3.2.1,

   key
         is set to the MAC key provided by the server, and

   mac
         is used to set the value of the "mac" attribute, after the
         result octet string is base64-encoded per [RFC2045] section
         6.8.

4.  Verifying Requests

   A server receiving an authenticated request validates it by
   performing the following REQUIRED steps:

   1.  Recalculate the request MAC as described in Section 3.2 and
       compare the request MAC to the value received from the client via
       the "mac" attribute.

   2.  Ensure that the combination of timestamp, nonce, and MAC key
       identifier received from the client has not been received before
       in a previous request.  The server MAY reject requests with stale
       timestamps as described in Section 4.1.

   3.  Verify the scope and validity of the MAC credentials.

   If the request fails verification, the server SHOULD respond using
   the 401 (Unauthorized) HTTP status code and include the "WWW-
   Authenticate" response header field as described in Section 4.2.

4.1.  Timestamp Verification

Richer, Mills & TschofenigExpires May 30, 2013                  [Page 9]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012


   The timestamp, nonce, and MAC key identifier combination provide a
   unique identifier which enables the server to prevent replay attacks.
   Without replay protection, an attacker can use a compromised (but
   otherwise valid and authenticated) request more than once, gaining
   long term access to a protected resource.

   Including a timestamp with the nonce removes the need to retain an
   infinite number of nonce values for future checks, by enabling the
   server to restrict the time period after which a request with an old
   timestamp is rejected.  If such a restriction is enforced, the server
   MUST:

   o  At the time the first request is received from the client for each
      MAC key identifier, calculate the difference (in seconds) between
      the request timestamp and the server's clock.  The difference -
      the request time delta - MUST be kept as long as the MAC key
      credentials are valid.

   o  For each subsequent client request, apply the request time delta
      to request timestamp to calculate the adjusted request time - the
      time when the request MAC has been generated by the client,
      adjusted to the server's clock.

   o  Verify that the adjusted request time is within the allowed time
      period defined by the server.  The server SHOULD allow for a
      sufficiently large window to accommodate network delays (between
      the time the request has been generated by the client to the time
      it is received by the server and processed).

4.2.  The "WWW-Authenticate" Response Header Field

   If the protected resource request does not include authentication
   credentials, contains an invalid MAC key identifier, or is malformed,
   the server SHOULD include the HTTP "WWW-Authenticate" response header
   field.

   For example:


     HTTP/1.1 401 Unauthorized
     WWW-Authenticate: MAC


   The "WWW-Authenticate" request header field uses the framework
   defined by [RFC2617] as follows:


     challenge   = "MAC" [ 1*SP #param ]
     param       = error / auth-param
     error       = "error" "=" ( token / quoted-string)


   Each attribute MUST NOT appear more than once.

Richer, Mills & TschofenigExpires May 30, 2013                 [Page 10]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012


   If the protected resource request included a MAC "Authorization"
   request header field and failed authentication, the server MAY
   include the "error" attribute to provide the client with a human-
   readable explanation why the access request was declined to assist
   the client developer in identifying the problem.

   For example:


     HTTP/1.1 401 Unauthorized
     WWW-Authenticate: MAC error="The MAC credentials expired"


5.  Use with OAuth 2.0

   OAuth 2.0 ([RFC6749]) defines an extensible token-based
   authentication framework.  The MAC authentication scheme can be used
   to make OAuth-based requests by issuing MAC-type access tokens.

   This specification does not define methods for the client to
   specifically request a MAC-type token from the authorization server.
   Additionally, it does not include any discovery facilities for
   identifying which HMAC algorithms are supported by a resource server,
   or how the client may go about obtaining MAC access tokens for any
   given protected resource.

5.1.  Issuing MAC-Type Access Tokens

   Authorization servers issuing MAC-type access tokens MUST include the
   following parameters whenever a response includes the "access_token"
   parameter:

   access_token
         REQUIRED. The MAC key identifier.

   mac_key
         REQUIRED. The MAC key.

   mac_algorithm
         REQUIRED. The MAC algorithm used to calculate the request MAC.
         Value MUST be one of "hmac-sha-1", "hmac-sha-256", or a
         registered extension algorithm name as described in Section
         7.1.

   For example:









Richer, Mills & TschofenigExpires May 30, 2013                 [Page 11]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012



     HTTP/1.1 200 OK
     Content-Type: application/json
     Cache-Control: no-store

     {
       "access_token":"SlAV32hkKG",
       "token_type":"mac",
       "expires_in":3600,
       "refresh_token":"8xLOxBtZp8",
       "mac_key":"adijq39jdlaska9asud",
       "mac_algorithm":"hmac-sha-256"
     }


6.  Security Considerations

   As stated in [RFC2617], the greatest sources of risks are usually
   found not in the core protocol itself but in policies and procedures
   surrounding its use.  Implementers are strongly encouraged to assess
   how this protocol addresses their security requirements.

6.1.  MAC Keys Transmission

   This specification describes two mechanism for obtaining or
   transmitting MAC keys, both require the use of a transport-layer
   security mechanism when sending MAC keys to the client.  Additional
   methods used to obtain MAC credentials must ensure that these
   transmissions are protected using transport-layer mechanisms such as
   TLS or SSL.

6.2.  Confidentiality of Requests

   While this protocol provides a mechanism for verifying the integrity
   of requests, it provides no guarantee of request confidentiality.
   Unless further precautions are taken, eavesdroppers will have full
   access to request content.  Servers should carefully consider the
   kinds of data likely to be sent as part of such requests, and should
   employ transport-layer security mechanisms to protect sensitive
   resources.

6.3.  Spoofing by Counterfeit Servers

   This protocol makes no attempt to verify the authenticity of the
   server.  A hostile party could take advantage of this by intercepting
   the client's requests and returning misleading or otherwise incorrect
   responses.  Service providers should consider such attacks when
   developing services using this protocol, and should require
   transport-layer security for any requests where the authenticity of
   the resource server or of request responses is an issue.

6.4.  Plaintext Storage of Credentials


Richer, Mills & TschofenigExpires May 30, 2013                 [Page 12]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012


   The MAC key functions the same way passwords do in traditional
   authentication systems.  In order to compute the request MAC, the
   server must have access to the MAC key in plaintext form.  This is in
   contrast, for example, to modern operating systems, which store only
   a one-way hash of user credentials.

   If an attacker were to gain access to these MAC keys - or worse, to
   the server's database of all such MAC keys - he or she would be able
   to perform any action on behalf of any resource owner.  Accordingly,
   it is critical that servers protect these MAC keys from unauthorized
   access.

6.5.  Entropy of MAC Keys

   Unless a transport-layer security protocol is used, eavesdroppers
   will have full access to authenticated requests and request MAC
   values, and will thus be able to mount offline brute-force attacks to
   recover the MAC key used.  Servers should be careful to assign MAC
   keys which are long enough, and random enough, to resist such attacks
   for at least the length of time that the MAC credentials are valid.

   For example, if the MAC credentials are valid for two weeks, servers
   should ensure that it is not possible to mount a brute force attack
   that recovers the MAC key in less than two weeks.  Of course, servers
   are urged to err on the side of caution, and use the longest MAC key
   reasonable.

   It is equally important that the pseudo-random number generator
   (PRNG) used to generate these MAC keys be of sufficiently high
   quality.  Many PRNG implementations generate number sequences that
   may appear to be random, but which nevertheless exhibit patterns or
   other weaknesses which make cryptanalysis or brute force attacks
   easier.  Implementers should be careful to use cryptographically
   secure PRNGs to avoid these problems.

6.6.  Denial of Service / Resource Exhaustion Attacks

   This specification includes a number of features which may make
   resource exhaustion attacks against servers possible.  For example,
   this protocol requires servers to track used nonces.  If an attacker
   is able to use many nonces quickly, the resources required to track
   them may exhaust available capacity.  And again, this protocol can
   require servers to perform potentially expensive computations in
   order to verify the request MAC on incoming requests.  An attacker
   may exploit this to perform a denial of service attack by sending a
   large number of invalid requests to the server.








Richer, Mills & TschofenigExpires May 30, 2013                 [Page 13]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012


   Resource Exhaustion attacks are by no means specific to this
   specification.  However, implementers should be careful to consider
   the additional avenues of attack that this protocol exposes, and
   design their implementations accordingly.  For example, entropy
   starvation typically results in either a complete denial of service
   while the system waits for new entropy or else in weak (easily
   guessable) MAC keys.  When implementing this protocol, servers should
   consider which of these presents a more serious risk for their
   application and design accordingly.

6.7.  Timing Attacks

   This specification makes use of HMACs, for which a signature
   verification involves comparing the received MAC string to the
   expected one.  If the string comparison operator operates in
   observably different times depending on inputs, e.g.  because it
   compares the strings character by character and returns a negative
   result as soon as two characters fail to match, then it may be
   possible to use this timing information to determine the expected
   MAC, character by character.

   Service implementers are encouraged to use fixed-time string
   comparators for MAC verification.

6.8.  CSRF Attacks

   A Cross-Site Request Forgery attack occurs when a site, evil.com,
   initiates within the victim's browser the loading of a URL from or
   the posting of a form to a web site where a side-effect will occur,
   e.g.  transfer of money, change of status message, etc.  To prevent
   this kind of attack, web sites may use various techniques to
   determine that the originator of the request is indeed the site
   itself, rather than a third party.  The classic approach is to
   include, in the set of URL parameters or form content, a nonce
   generated by the server and tied to the user's session, which
   indicates that only the server could have triggered the action.

   Recently, the Origin HTTP header has been proposed and deployed in
   some browsers.  This header indicates the scheme, host, and port of
   the originator of a request.  Some web applications may use this
   Origin header as a defense against CSRF.

   To keep this specification simple, HTTP headers are not part of the
   string to be MAC'ed.  As a result, MAC authentication cannot defend
   against header spoofing, and a web site that uses the Host header to
   defend against CSRF attacks cannot use MAC authentication to defend
   against active network attackers.  Sites that want the full
   protection of MAC Authentication should use traditional, cookie-tied
   CSRF defenses.

6.9.  Coverage Limitations



Richer, Mills & TschofenigExpires May 30, 2013                 [Page 14]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012


   The normalized request string has been designed to support the
   authentication methods defined in this specification.  Those
   designing additional methods, should evaluated the compatibility of
   the normalized request string with their security requirements.
   Since the normalized request string does not cover the entire HTTP
   request, servers should employ additional mechanisms to protect such
   elements.

   The request MAC does not cover entity-header fields which can often
   affect how the request body is interpreted by the server (i.e.
   Content-Type). If the server behavior is influenced by the presence
   or value of such header fields, an attacker can manipulate the
   request header without being detected.

7.  IANA Considerations

7.1.  The HTTP MAC Authentication Scheme Algorithm Registry

   This specification establishes the HTTP MAC authentication scheme
   algorithm registry.

   Additional MAC algorithms are registered on the advice of one or more
   Designated Experts (appointed by the IESG or their delegate), with a
   Specification Required (using terminology from [RFC5226]). However,
   to allow for the allocation of values prior to publication, the
   Designated Expert(s) may approve registration once they are satisfied
   that such a specification will be published.

   Registration requests should be sent to the [TBD]@ietf.org mailing
   list for review and comment, with an appropriate subject (e.g.,
   "Request for MAC Algorithm: example").  [[ Note to RFC-EDITOR: The
   name of the mailing list should be determined in consultation with
   the IESG and IANA. Suggested name: http-mac-ext-review.  ]]

   Within at most 14 days of the request, the Designated Expert(s) will
   either approve or deny the registration request, communicating this
   decision to the review list and IANA.  Denials should include an
   explanation and, if applicable, suggestions as to how to make the
   request successful.

   Decisions (or lack thereof) made by the Designated Expert can be
   first appealed to Application Area Directors (contactable using app-
   ads@tools.ietf.org email address or directly by looking up their
   email addresses on http://www.iesg.org/ website) and, if the
   appellant is not satisfied with the response, to the full IESG (using
   the iesg@iesg.org mailing list).

   IANA should only accept registry updates from the Designated
   Expert(s), and should direct all requests for registration to the
   review mailing list.

7.1.1.  Registration Template


Richer, Mills & TschofenigExpires May 30, 2013                 [Page 15]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012


   Algorithm name:
      The name requested (e.g., "example").

   Change controller:
      For standards-track RFCs, state "IETF".  For others, give the name
      of the responsible party.  Other details (e.g., postal address,
      e-mail address, home page URI) may also be included.

   Specification document(s):
      Reference to document that specifies the algorithm, preferably
      including a URI that can be used to retrieve a copy of the
      document.  An indication of the relevant sections may also be
      included, but is not required.

7.1.2.  Initial Registry Contents

   The HTTP MAC authentication scheme algorithm registry's initial
   contents are:

   o  Algorithm name: hmac-sha-1

   o  Change controller: IETF

   o  Specification document(s): [[ this document ]]

   o  Algorithm name: hmac-sha-256

   o  Change controller: IETF

   o  Specification document(s): [[ this document ]]

7.2.  OAuth Access Token Type Registration

   This specification registers the following access token type in the
   OAuth Access Token Type Registry.

7.2.1.  The "mac" OAuth Access Token Type

   Type name:
      mac

   Additional Token Endpoint Response Parameters:
      secret, algorithm

   HTTP Authentication Scheme(s):
      MAC

   Change controller:
      IETF

   Specification document(s):
      [[ this document ]]


Richer, Mills & TschofenigExpires May 30, 2013                 [Page 16]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012


7.3.  OAuth Parameters Registration

   This specification registers the following parameters in the OAuth
   Parameters Registry established by [RFC6749].

7.3.1.  The "mac_key" OAuth Parameter

   Parameter name: mac_key

   Parameter usage location: authorization response, token response

   Change controller: IETF

   Specification document(s): [[ this document ]]

   Related information: None

7.3.2.  The "mac_algorithm" OAuth Parameter

   Parameter name: mac_algorithm

   Parameter usage location: authorization response, token response

   Change controller: IETF

   Specification document(s): [[ this document ]]

   Related information: None

8.  Contributors

   This document is based on OAuth 1.0 and we would like to thank Eran
   Hammer-Lahav for his work on incorporating the ideas into OAuth 2.0.

9.  Acknowledgments

   The author would like to thank Ben Adida, Adam Barth, Phil Hunt,
   Rasmus Lerdorf, James Manger, William Mills, Scott Renfro, Justin
   Richer, Toby White, Peter Wolanin, and Skylar Woodward for their
   contributions, suggestions, and feedback.

10.  References

10.1.  Normative References

   [10]       Fielding, R. and J. Reschke, "Hypertext Transfer Protocol
              (HTTP/1.1): Message Syntax and Routing", Internet-Draft
              draft-ietf-httpbis-p1-messaging-21, October 2012.

   [11]       Hardt, D., "The OAuth 2.0 Authorization Framework", RFC
              6749, October 2012.



Richer, Mills & TschofenigExpires May 30, 2013                 [Page 17]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012


   [12]       Hors, A., Raggett, D. and I. Jacobs, "HTML 4.01
              Specification", World Wide Web Consortium Recommendation
              REC-html401-19991224, December 1999, <http://www.w3.org/TR
              /1999/REC-html401-19991224>.

   [13]       National Institute of Standards and Technology, "Secure
              Hash Standard (SHS). FIPS PUB 180-3, October 2008", .

   [1]        Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [2]        Freed, N. and N.S. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part One: Format of Internet Message
              Bodies", RFC 2045, November 1996.

   [3]        Krawczyk, H., Bellare, M. and R. Canetti, "HMAC: Keyed-
              Hashing for Message Authentication", RFC 2104, February
              1997.

   [4]        Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P. and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [5]        Franks, J., Hallam-Baker, P.M., Hostetler, J.L., Lawrence,
              S.D., Leach, P.J., Luotonen, A. and L. Stewart, "HTTP
              Authentication: Basic and Digest Access Authentication",
              RFC 2617, June 1999.

   [6]        Berners-Lee, T., Fielding, R. and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66, RFC
              3986, January 2005.

   [7]        Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 5226,
              May 2008.

   [8]        Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246, August 2008.

   [9]        Barth, A., "HTTP State Management Mechanism", RFC 6265,
              April 2011.

10.2.  Informative References

   [1]        Tschofenig, H. and P. Hunt, "OAuth 2.0 Security: Going
              Beyond Bearer Tokens", Internet-Draft draft-tschofenig-
              oauth-security-00, September 2012.

   [2]        Bradley, J., Hunt, P., Nadalin, A. and H. Tschofenig, "The
              OAuth 2.0 Authorization Framework: Holder-of-the-Key Token
              Usage", Internet-Draft draft-tschofenig-oauth-hotk-01,
              July 2012.


Richer, Mills & TschofenigExpires May 30, 2013                 [Page 18]


Internet-Draft            OAuth 2.0 MAC Tokens             November 2012


   [3]        Hammer-Lahav, E., "The OAuth 1.0 Protocol", RFC 5849,
              April 2010.

Authors' Addresses

   Justin Richer, editor
   The MITRE Corporation

   Email: jricher@mitre.org


   William Mills, editor
   Yahoo! Inc.

   Email: wmills@yahoo-inc.com


   Hannes Tschofenig, editor
   Nokia Siemens Networks
   Linnoitustie 6
   Espoo, 02600
   Finland

   Phone: +358 (50) 4871445
   Email: Hannes.Tschofenig@gmx.net
   URI:   http://www.tschofenig.priv.at



























Richer, Mills & TschofenigExpires May 30, 2013                 [Page 19]