Identity Assertion Authorization Grant

2.1. Roles

Client

Application that wants to obtain an OAuth 2.0 access token on behalf of a signed-in user to an external/3rd party application's API (Resource Server below). In [I-D.ietf-oauth-identity-chaining], this is the Client in trust domain A.¶

Resource Application

Application that provides an OAuth 2.0 Protected Resource. In [I-D.ietf-oauth-identity-chaining], this is the Protected Resource in trust domain B.¶

Authorization Server (IdP)

The Identity Provider that is trusted by a set of applications in an organization's app ecosystem. In [I-D.ietf-oauth-identity-chaining], this is the Authorization Server in trust domain A, which is also trusted by the Authorization Server of the Protected Resource in trust domain B.¶

5.1. Processing Rules

The IdP MUST validate the subject token, and MUST validate that the audience of the Subject Token (e.g. the aud claim of the ID Token) matches the client_id of the client authentication of the request.¶

The IdP evaluates administrator-defined policy for the token exchange request and determines if the client should be granted access to act on behalf of the subject for the target audience and scopes.¶

The IdP may also introspect the authentication context described in the SSO assertion to determine if step-up authentication is required.¶

5.2. Response

If access is granted, the IdP creates a signed Identity Assertion Authorization Grant JWT and returns it in the token exchange response defined in Section 2.2 of [RFC8693]:¶

HTTP/1.1 200 OK
Content-Type: application/json
Cache-Control: no-store
Pragma: no-cache

{
  "issued_token_type": "urn:ietf:params:oauth:token-type:id-jag",
  "access_token": "eyJhbGciOiJIUzI1NiIsI...",
  "token_type": "N_A",
  "scope": "chat.read chat.history",
  "expires_in": 300
}

• issued_token_type - urn:ietf:params:oauth:token-type:id-jag¶

• access_token - The Identity Assertion Authorization Grant JWT. (Token Exchange requires the access_token response parameter for historical reasons, even though this is not an OAuth access token.)¶

• token_type - N_A (As defined by Token Exchange.)¶

• scope - The list of scopes granted by the IdP. This may be fewer scopes than the application requested based on various policies in the IdP.¶

• expires_in - The lifetime in seconds of the authorization grant.¶

HTTP/1.1 400 Bad Request
Content-Type: application/json
Cache-Control: no-store

{
  "error": "invalid_grant",
  "error_description": "Audience validation failed"
}

5.3. Identity Assertion Authorization Grant JWT

The Identity Assertion Authorization Grant JWT is issued and signed by the IdP, and describes the intended audience of the authorization grant as well as the client to which it was issued and the subject identifier of the original identity assertion, using the following claims:¶

• iss - The IdP issuer URL¶

• sub - The User ID at the IdP¶

• aud - Token endpoint of the Resource Application's authorization server¶

• client_id - Client ID as registered with the Resource Application's authorization server.¶

• scopes - Array of scopes at the Resource Application granted to the Client¶

• jti - Unique ID of this JWT¶

• exp, iat - as defined by JWT¶

The typ of the JWT indicated in the JWT header MUST be oauth-id-jag+jwt.¶

An example JWT shown with expanded header and payload claims is below:¶

{
  "typ": "oauth-id-jag+jwt"
}
.
{
  "jti": "9e43f81b64a33f20116179",
  "iss": "https://acme.idp.example",
  "sub": "U019488227",
  "aud": "https://acme.chat.example/oauth2/token",
  "client_id": "f53f191f9311af35",
  "exp": 1311281970,
  "iat": 1311280970,
  "scopes" : [ "chat.read" , "chat.history" ]
}
.
signature

Implementation notes:¶

• If the IdP is multi-tenant and uses the same issuer for all tenants, the Resource Application will already have IdP-specific logic to determine the tenant from OIDC/SAML (e.g. the hd claim in Google) and will need to use that if the IdP also has only one client registration for the Resource Application.¶

• sub should be an opaque ID, as iss+sub is unique. The IdP might want to also include the user's email here, which it should do as a new email claim. This would let the app dedupe existing users who may have an account with an email address but have not done SSO yet.¶

6.1. Processing Rules

All of Section 5.2 of [RFC7521] applies, in addition to the following processing rules:¶

• Validate the JWT typ is oauth-id-jag+jwt (per [RFC8725])¶

• The aud claim MUST identify the token endpoint of the Resource Application as the intended audience of the JWT.¶

6.2. Response

The Resource Application token endpoint responds with an OAuth 2.0 Token Response, e.g.:¶

HTTP/1.1 200 OK
Content-Type: application/json;charset=UTF-8
Cache-Control: no-store
Pragma: no-cache

{
  "token_type": "Bearer",
  "access_token": "2YotnFZFEjr1zCsicMWpAA",
  "expires_in": 86400,
  "refresh_token": "tGzv3JOkF0XG5Qx2TlKWIA",
}

7.1. Client Authentication

This specification SHOULD only be supported for confidential clients. Public clients SHOULD redirect the user with an OAuth 2.0 Authorization Request.¶

7.2. Step-Up Authentication

In the initial token exchange request, the IdP may require step-up authentication for the subject if the authentication context in the subject's assertion does not meet policy requirements. An insufficient_user_authentication OAuth error response may be returned to convey the authentication requirements back to the client similar to OAuth 2.0 Step-up Authentication Challenge Protocol [RFC9470].¶

HTTP/1.1 400 Bad Request
Content-Type: application/json
Cache-Control: no-store

{
  "error": "insufficient_user_authentication",
  "error_description": "Subject doesn't meet authentication requirements",
  "max_age": 5
}

The Client would need to redirect the user back to the IdP to obtain a new assertion that meets the requirements and retry the token exchange.¶

TBD: It may make more sense to request the Identity Assertion Authorization Grant as an additional response_type on the authorization request if using OIDC for SSO when performing a step-up to skip the need for additional token exchange round-trip.¶

8.1. Media Types

This section registers oauth-id-jag+jwt, a new media type [RFC2046] in the "Media Types" registry [IANA.MediaTypes] in the manner described in [RFC6838]. It can be used to indicate that the content is a Identity Assertion Authorization Grant JWT.¶

8.2. OAuth URI Registration

This section registers urn:ietf:params:oauth:token-type:id-jag in the "OAuth URI" subregistry of the "OAuth Parameters" registry [IANA.oauth-parameters].¶

• URN: urn:ietf:params:oauth:token-type:id-jag¶

• Common Name: Token type URI for a Identity Assertion JWT Authorization Grant¶

• Change Controller: IESG¶

• Specification Document: This document¶

A.1. Enterprise Deployment

Enterprises often have hundreds of SaaS applications. SaaS applications often have integrations to other SaaS applications that are critical to the application experience and jobs to be done. When a SaaS app needs to request an access token on behalf of a user to a 3rd party SaaS integration's API, the end-user typically needs to complete an interactive delegated OAuth 2.0 flow, as the SaaS application is not in the same security or policy domain as the 3rd party SaaS integration.¶

It is industry best practice for an enterprise to connect their ecosystem of SaaS applications to their Identity Provider (IdP) to centralize identity and access management capabilites for the organization. End-users get a better experience (SSO) and administrators get better security outcomes such multi-factor authentication and zero-trust. SaaS applications today enable the administrator to establish trust with an IdP for user authentication.¶

This specification can be used to extend the SSO relationship of multiple SaaS applications to include API access between these applications as well. This specification enables federation for Authorization Servers across policy or administrative boundaries. The same enterprise IdP that is trusted by applications for SSO can be extended to broker access to APIs. This enables the enterprise to centralize more access decisions across their SaaS ecosystem and provides better end-user experience for users that need to connect multiple applications via OAuth 2.0.¶

A.2. Email and Calendaring Applications

Email clients can be used with arbitrary email servers, and cannot require pre-established relationships between each email client and each email server. When an email client uses OAuth to obtain an access token to an email server, this provides the security benefit of being able to use strong multi-factor authentication methods provided by the email server's authorization server, but does require that the user go through a web-based flow to log in to the email client. However, this web-based flow is often seen as distruptive to the user experience when initiated from a desktop or mobile native application, and so is often attempted to be minimized as much as possible.¶

When the email client needs access to a separate API, such as a third-party calendaring application, traditionally this would require that the email client go through another web-based OAuth redirect flow to obtain authorization and ultimately an access token.¶

To streamline the user experience, this specification can be used to enable the email client to use the identity assertion to obtain an access token for the third-party calendaring application without any user interaction.¶