Internet-Draft SVCB for DNS February 2021
Schwartz Expires 21 August 2021 [Page]
Intended Status:
Standards Track
B. Schwartz
Google LLC

Service Binding Mapping for DNS Servers


The SVCB DNS record type expresses a bound collection of endpoint metadata, for use when establishing a connection to a named service. DNS itself can be such a service, when the server is identified by a domain name. This document provides the SVCB mapping for named DNS servers, allowing them to indicate support for new transport protocols.

Discussion Venues

This note is to be removed before publishing as an RFC.

Discussion of this document takes place on the ADD Working Group mailing list (, which is archived at

Source for this draft and an issue tracker can be found at

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 21 August 2021.

1. Introduction

The SVCB record type [SVCB] provides clients with information about how to reach alternative endpoints for a service, which may have improved performance or privacy properties. The service is identified by a "scheme" indicating the service type, a hostname, and optionally other information such as a port number. A DNS server is often identified only by its IP address (e.g. in DHCP), but in some contexts it can also be identified by a hostname (e.g. "NS" records, manual resolver configuration) and sometimes also a non-default port number.

Use of the SVCB record type requires a mapping document for each service type, indicating how a client for that service can interpret the contents of the SVCB SvcParams. This document provides the mapping for the "dns" service type, allowing DNS servers to offer alternative endpoints and transports, including encrypted transports like DNS over TLS and DNS over HTTPS.

2. Conventions and Definitions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

3. Name form

Names are formed using Port-Prefix Naming ([SVCB] Section 2.3). For example, a DNS service identified by the name "" and (unusually) the non-default port number 5353 would be represented as

4. Applicable existing SvcParamKeys

4.1. alpn and no-default-alpn

These keys indicate the set of supported protocols ([SVCB] Section 6.1). The default protocol is "dot", indicating support for DNS over TLS [DOT].

If the protocol set contains any HTTP versions (e.g. "h2", "h3"), then the record indicates support for DNS over HTTPS [DOH], and the "dohpath" key MUST be present (Section 5.1). All keys specified for use with the HTTPS record are also permissible, and apply to the resulting HTTP connection.

If the protocol set contains protocols with different default ports, and no port key is specified, then protocols are contacted separately on their default ports. Note that in this configuration, ALPN negotiation does not defend against cross-protocol downgrade attacks.

These keys are automatically mandatory if present. (See Section 7 of [SVCB] for the definition of "automatically mandatory".)

4.2. port

This key is used to indicate the target port for connection (([SVCB] Section 6.2)). If omitted, the client SHALL use the default port for each transport protocol (853 for DNS over TLS, 443 for DNS over HTTPS).

This key is automatically mandatory if present.

4.3. Other applicable SvcParamKeys

These SvcParamKeys apply to the "dns" scheme without modification:

  • echconfig
  • ipv4hint
  • ipv6hint

5. New SvcParamKeys

5.1. dohpath

"dohpath" is a single-valued SvcParamKey whose value (both in presentation and wire format) is a relative URI Template [RFC6570], normally starting with "/". If the "alpn" SvcParamKey indicates support for HTTP, clients MAY construct a DNS over HTTPS URI Template by combining the prefix "https://", the service name, the port from the "port" key if present, and the "dohpath" value. (The DNS service's original port number MUST NOT be used.)

Clients SHOULD NOT query for any "HTTPS" RRs when using the constructed URI Template. Instead, the SvcParams and address records associated with this SVCB record SHOULD be used for the HTTPS connection, with the same semantics as an HTTPS RR. However, for consistency, service operators SHOULD publish an equivalent HTTPS RR, especially if clients might learn this URI Template through a different channel.

6. Limitations

This document is concerned exclusively with the DNS transport, and does not affect or inform the construction or interpretation of DNS messages. For example, nothing in this document indicates whether the service is intended for use as a recursive or authoritative DNS server. Clients must know the intended use in their context.

7. Relationship to DNS URIs

The dns: URI scheme [DNSURI] describes a way to represent DNS queries as URIs. This scheme optionally includes an authority, comprised of a host and port number (with a default of 53). DNS URIs normally omit the authority, or specify an IP address, but a hostname is allowed, in which case it is suitable for use with this mapping.

8. Examples

  • A resolver at resolver.example that supports

    • DNS over TLS on resolver.example, port 853 and 8530, with resolver.example as the Authentication Domain Name,
    • DNS over HTTPS at https://resolver.example/dns-query{?dns}, and
    • an experimental protocol on fooexp.resolver.example:5353:

      $ORIGIN example.
      _dns.resolver 7200 IN SVCB 1 resolver (
        alpn=h2,h3 echconfig=... dohpath=/dns-query{?dns} )
      _dns.resolver 7200 IN SVCB 2 resolver (
        port=8530 echconfig=... )
      _dns.resolver 7200 IN SVCB 3 fooexp.resolver ( port=5353
        echconfig=... alpn=foo no-default-alpn foo-info=... )
  • A nameserver at ns.example whose service configuration is published on a different domain:

    $ORIGIN example.
    _dns.ns 7200 IN SVCB 0 _dns.ns.nic

9. Security Considerations

9.1. Adversary on the query path

This section considers an adversary who can add or remove responses to the SVCB query.

Clients MUST authenticate the server to its name during secure transport establishment. This name is the hostname used to construct the original SVCB query, and cannot be influenced by the SVCB record contents. Accordingly, this draft does not mandate the use of DNSSEC. This draft also does not specify how clients authenticate the name (e.g. selection of roots of trust), which might vary according to the context.

Although this adversary cannot alter the authentication name of the service, it does have control of the port number and "dohpath" value. As a result, the adversary can direct DNS queries for $HOSTNAME to any port on $HOSTNAME, and any path on "https://$HOSTNAME", even if $HOSTNAME is not actually a DNS server. If the DNS client uses shared TLS or HTTP state, the client could be correctly authenticated (e.g. using a TLS client certificate or HTTP cookie).

This behavior creates a number of possible attacks for certain server configurations. For example, if "https://$HOSTNAME/upload" accepts any POST request as a public file upload, the adversary could forge a SVCB record containing dohpath=/upload. This would cause the client to upload and publish every query, resulting in unexpected storage costs for the server and privacy loss for the client.

To mitigate this attack, a client of this SVCB mapping MUST NOT provide client authentication for DNS queries, except to servers that it specifically knows are not vulnerable to such attacks, and a DoH service operator MUST ensure that all unauthenticated DoH requests to its origin maintain the DoH service's privacy guarantees, regardless of the path. Also, if an alternative service endpoint sends an invalid response to a DNS query, the client SHOULD NOT send more queries to that endpoint.

9.2. Adversary on the transport path

This section considers an adversary who can modify network traffic between the client and the SvcDomainName (i.e. the destination server).

For a SVCB-reliant client ([SVCB] Section 3), this adversary can only cause a denial of service. However, because DNS is unencrypted by default, this adversary can execute a downgrade attack against SVCB-optional clients. Accordingly, when use of this specification is optional, clients SHOULD switch to SVCB-reliant behavior if SVCB resolution succeeds. Specifications making using of this mapping MAY adjust this fallback behavior to suit their requirements.

10. IANA Considerations

Per [SVCB] IANA would be directed to add the following entry to the SVCB Service Parameters registry.

Table 1
Number Name Meaning Reference
TBD dohpath DNS over HTTPS path template (This document)

Per [Attrleaf], IANA would be directed to add the following entry to the DNS Underscore Global Scoped Entry Registry:

Table 2
RR TYPE _NODE NAME Meaning Reference
SVCB _dns DNS SVCB info (This document)

11. References

11.1. Normative References

Hoffman, P. and P. McManus, "DNS Queries over HTTPS (DoH)", RFC 8484, DOI 10.17487/RFC8484, , <>.
Hu, Z., Zhu, L., Heidemann, J., Mankin, A., Wessels, D., and P. Hoffman, "Specification for DNS over Transport Layer Security (TLS)", RFC 7858, DOI 10.17487/RFC7858, , <>.
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <>.
Gregorio, J., Fielding, R., Hadley, M., Nottingham, M., and D. Orchard, "URI Template", RFC 6570, DOI 10.17487/RFC6570, , <>.
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <>.
Schwartz, B. M., Bishop, M., and E. Nygren, "Service binding and parameter specification via the DNS (DNS SVCB and HTTPS RRs)", Work in Progress, Internet-Draft, draft-ietf-dnsop-svcb-https-02, , <>.

11.2. Informative References

Crocker, D., "Scoped Interpretation of DNS Resource Records through "Underscored" Naming of Attribute Leaves", BCP 222, RFC 8552, DOI 10.17487/RFC8552, , <>.
Josefsson, S., "Domain Name System Uniform Resource Identifiers", RFC 4501, DOI 10.17487/RFC4501, , <>.

Appendix A. Mapping Summary

This table serves as a non-normative summary of the DNS mapping for SVCB.

Table 3
Mapped scheme "dns"
RR type SVCB (64)
Name prefix _dns for port 53, else _$PORT._dns
Automatically Mandatory Keys port, no-default-alpn
SvcParam defaults alpn: ["dot"]
Special behaviors Supports all HTTPS RR SvcParamKeys
  Overrides the HTTPS RR for DoH
  Default port is per-transport
  No encrypted -> cleartext fallback


TODO acknowledge.

Author's Address

Benjamin Schwartz
Google LLC