Optimal Transmission Window Option for ICMPv6 Router Advertisement
draft-savolainen-6lo-optimal-transmission-window-00
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Author | Teemu Savolainen | ||
| Last updated | 2014-08-04 (Latest revision 2014-01-31) | ||
| Replaces | draft-savolainen-6man-optimal-transmission-window | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
For a class of gateways an activation of an uplink network connection, such as cellular radio connection, incurs a fixed cost in form of consumed energy. For these gateways minimizing the number of uplink activations is of importance. This specification describes an Optimal Transmission Window option for ICMPv6 Router Advertisement that a gateway can use to communicate optimal transmission window for nodes it is serving, thus helping to group separate transmissions together and thereby reduce number of gateway's uplink connection activation events.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)