SIPPING                                                  E. Burger (Ed.)
Internet-Draft                                               J. Van Dyke
Expires: September 14, 2004                                   A. Spitzer
                                                SnowShore Networks, Inc.
                                                          March 16, 2004


                 Basic Network Media Services with SIP
                     draft-burger-sipping-netann-09

Status of this Memo

   By submitting this Internet-Draft, I certify that any applicable
   patent or other IPR claims of which I am aware have been disclosed,
   and any of which I become aware will be disclosed, in accordance with
   RFC 3667.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups. Note that other
   groups may also distribute working documents as Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time. It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at http://
   www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on September 14, 2004.

Copyright Notice

   Copyright (C) The Internet Society (2004). All Rights Reserved.

Abstract

   In SIP-based networks, there is a need to provide basic network media
   services.  Such services include network announcements, user
   interaction, and conferencing services.  These services are basic
   building blocks, from which one can construct interesting
   applications.  In order to have interoperability between servers
   offering these building blocks (also known as Media Servers) and
   application developers, one needs to be able to locate and invoke
   such services in a well-defined manner.




Burger (Ed.), et al.    Expires September 14, 2004              [Page 1]


Internet-Draft             SIP Media Services                 March 2004


   This document describes a mechanism for providing an interoperable
   protocol interface between Application Servers, which provide
   application services to SIP-based networks, and Media Servers, which
   provide the basic media processing building blocks.

Conventions used in this document

   RFC2119 [1] provides the interpretations for the key words "MUST",
   "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT",
   "RECOMMENDED", "MAY", and "OPTIONAL" found in this document.

Table of Contents

   1.  Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Mechanism  . . . . . . . . . . . . . . . . . . . . . . . . . .  3
   3.  Announcement Service . . . . . . . . . . . . . . . . . . . . .  5
   3.1 Operation  . . . . . . . . . . . . . . . . . . . . . . . . . .  7
   3.2 Protocol Diagram . . . . . . . . . . . . . . . . . . . . . . .  8
   3.3 Formal Syntax  . . . . . . . . . . . . . . . . . . . . . . . .  8
   4.  Prompt and Collect Service . . . . . . . . . . . . . . . . . . 10
   4.1 Formal Syntax for Prompt and Collect Service . . . . . . . . . 11
   5.  Conference Service . . . . . . . . . . . . . . . . . . . . . . 12
   5.1 Protocol Diagram . . . . . . . . . . . . . . . . . . . . . . . 13
   5.2 Formal Syntax  . . . . . . . . . . . . . . . . . . . . . . . . 15
   6.  The User Part  . . . . . . . . . . . . . . . . . . . . . . . . 15
   7.  Security Considerations  . . . . . . . . . . . . . . . . . . . 17
   8.  Contributors . . . . . . . . . . . . . . . . . . . . . . . . . 18
   9.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 18
       Normative References . . . . . . . . . . . . . . . . . . . . . 18
       Informative References . . . . . . . . . . . . . . . . . . . . 19
       Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 20
       Intellectual Property and Copyright Statements . . . . . . . . 21



















Burger (Ed.), et al.    Expires September 14, 2004              [Page 2]


Internet-Draft             SIP Media Services                 March 2004


1. Overview

   In SIP-based media networks (RFC3261 [2]), there is a need to provide
   basic network media services.  Such services include playing
   announcements, initiating a media mixing session (conference), and
   prompting and collecting information with a user.

   These services are basic in nature, are few in number, and
   fundamentally have not changed in 25 years of enhanced telephony
   services.  Moreover, given their elemental nature, one would not
   expect them to change in the future.

   Multifunction media servers provide network media services to clients
   using server protocols such as SIP, often in conjunction with markup
   languages such as VoiceXML [10], KPML [11], and MSCML [12].  This
   document describes how to identify to a multifunction media server
   what sort of session the client is requesting, without modifying the
   SIP protocol.

   Announcements are media played to the user.  Announcements can be
   static media files, media files generated in real-time, media streams
   generated in real-time, multimedia objects, or combinations of the
   above.

   Media mixing is the act of mixing different RTP streams, as described
   in RFC1889 [13]. Note that the service described here suffices for
   simple mixing of media for a basic conferencing service.  This
   service does not address enhanced conferencing services, such as
   floor control, gain control, muting, subconferences, etc.  MSCML [12]
   addresses enhanced conferencing.  However, that is beyond the scope
   of this document.  Interested readers should read
   conferencing-framework [14] for details on the IETF SIP conferencing
   framework.

   Prompt and collect is where the server prompts the user for some
   information, as in an announcement, and then collects the user's
   response.  This can be a one-step interaction, for example by playing
   an announcement, "Please enter your pass code", followed by
   collecting a string of digits.  It can also be a more complex
   interaction, specified, for example, by VoiceXML [10] or MSCML [12].

2. Mechanism

   In the context of SIP control of media servers, we take advantage of
   the fact that the standard SIP URI has a user part.  Multifunction
   media servers do not have users. Thus we use the user address, or the
   left-hand-side of the URI, as a service indicator.




Burger (Ed.), et al.    Expires September 14, 2004              [Page 3]


Internet-Draft             SIP Media Services                 March 2004


   Note that the set of services is small, well defined, and well
   contained.  The section The User Part (Section 6) discusses the
   issues with using a fixed set of user-space names.

   For per-service security, the media server SHOULD use the security
   protocols described in RFC3261 [2].

   The media server MAY issue 401 challenges for authentication.  The
   media server SHOULD support the sips: scheme for the announcement
   service.  The media server MUST support the sips: scheme for the
   dialog and conference services.  The level of authentication to
   require for each service is a matter of local policy.

   The media server, upon receiving the INVITE, notes the service
   indicator.  Depending on the service indicator, the media server will
   either honor the request or return a failure response code.

   The service indicator is the concatenation of the service name and an
   optional service instance identifier, separated by an equal sign.

   Per RFC3261 [2], the service indicator is case insensitive.  The
   service name MUST be from the set alphanumeric characters plus dash
   (US-ASCII %2C).  The service name MUST NOT include an equal sign
   (US-ASCII %3D).

   The service name MAY have long- and short-forms, as SIP does for
   headers.

   A given service indicator MAY have an associated set of parameters.
   Such parameters MUST follow the convention set out for SIP URI
   parameters.  That is, a semi-colon separated list of keyword=value
   pairs.

   Certain services may have an association with a unique service
   instance on the media server.  For example, a given media server can
   host multiple, separate conference sessions.  To identify unique
   service instances, a unique identifier modifies the service name.
   The unique identifier MUST meet the rules for a legal user part of a
   SIP URI.  An equal sign, US-ASCII %3D, MUST separate the service
   indicator from the unique identifier.

   Note that since the service indicator is case insensitive, the
   service instance identifier is also case insensitive.

   The requesting client issues a SIP INVITE to the media server,
   specifying the requested service and any appropriate parameters.

   If the media server can perform the requested service, it does so,



Burger (Ed.), et al.    Expires September 14, 2004              [Page 4]


Internet-Draft             SIP Media Services                 March 2004


   following the processing steps described in the service definition
   document.

   If the media server cannot perform the requested service or does not
   recognize the service indicator, it MUST respond with the response
   code 488 NOT ACCEPTABLE HERE.  This is appropriate, as 488 refers to
   a problem with the user part of the URI.  Moreover, 606 is not
   appropriate, as some other media server may be able to satisfy the
   request.  RFC3261 [2] describes the 488 and 606 response codes.

   Some services require a unique identifier.  Most services
   automatically create a service instance upon the first INVITE with
   the given identifier.  However, if a service requires an existing
   service instance, and no such service instance exists on the media
   server, the media server MUST respond with the response code 404 NOT
   FOUND.  This is appropriate as the service itself exists on the media
   server, but the particular service instance does not. It is as if the
   user was not home.

3. Announcement Service

   A network announcement is the delivery of a multimedia resource, such
   as a prompt file, to a terminal device.  Note the multimedia resource
   may be any multimedia object that the media server supports. This
   service can play a single object with multiple streams, such as a
   video and audio prompt.  However, this service cannot play multiple
   objects on the same SIP dialog.

   There are two types of network announcements.  The differentiating
   characteristic between the two types is whether the network fully
   sets up the SIP dialog before playing the announcement.  The analog
   in the PSTN is whether answer supervision is supplied; i.e. does the
   announcement server answer the call prior to delivering the
   announcement.

   Playing an announcement after call setup is straightforward.  First,
   the requesting device issues an INVITE to the media server requesting
   the announcement service.  The media server negotiates the SDP and
   responds with a 200 OK.  After receiving the ACK from the requesting
   device, the media server plays the requested object and issues a BYE
   to the requesting device.

   If the media server supports announcements, but it cannot find the
   referenced URI, it MUST respond with the 404 NOT FOUND response code.

   If the media server receives an INVITE for the announcement service
   without a "play=" parameter, it MUST respond with the 404 NOT FOUND
   response code, as there is no default value for the announcement



Burger (Ed.), et al.    Expires September 14, 2004              [Page 5]


Internet-Draft             SIP Media Services                 March 2004


   service.

   If there is an error retrieving the announcement, the media server
   MUST respond with a 404 NOT FOUND response code.  In addition, the
   media server SHOULD include a Warning header with appropriate
   explanatory text explaining what failed.

   The Request URI fully describes the announcement service through the
   use of the user part of the address and additional URI parameters.
   The user portion of the address, "__sip-annc", specifies the
   announcement service on the media server.  The service has several
   associated URI parameters that control the content and delivery of
   the announcement.  These parameters are described below:
   play Specifies the resource or announcement sequence to be played.
   repeat Specifies how many times the media server should repeat the
      announcement or sequence named by the "play=" parameter.
   delay Specifies a delay interval between announcement repetitions.
      The delay is measured in milliseconds.
   duration Specifies the maximum duration of the announcement.  The
      media server will discontinue the announcement and end the call if
      the maximum duration has been reached.  The duration is measured
      in milliseconds.
   locale Specifies the language and optionally country variant of the
      announcement sequence named in the "play=" parameter.  RFC3066 [3]
      specifies the locale tag.  The locale tag is usually a two- or
      three-letter code per ISO 639-1 [4]. The country variant is also
      often a two-letter code per ISO 3166-1 [5].  These elements are
      concatenated with a single under bar (%x5F) character, such as
      "en_CA".  If only the language is specified, such as locale=en,
      the choice of country variant is an implementation matter.
      Implementations SHOULD provide the best possible match between the
      requested locale and the available languages in the event the
      media server cannot honor the locale request precisely.  For
      example, if the request has locale=ca_FR but the media server only
      has fr_FR available, the media server should use the fr_FR
      variant.  Implementations SHOULD provide a default locale to use
      if no language variants are available.
   param[n] Provides a mechanism for passing values that are to be
      substituted into an announcement sequence.  Up to 9 parameters
      ("param1=" through "param9=") may be specified. The mechanics of
      announcement sequences are beyond the scope of this document.
   extension Provides a mechanism for extending the parameter set.  If
      the media server receives an extension it does not understand, it
      MUST silently ignore the extension parameter and value.

   The "play=" parameter is mandatory and MUST be present.  All other
   parameters are OPTIONAL.




Burger (Ed.), et al.    Expires September 14, 2004              [Page 6]


Internet-Draft             SIP Media Services                 March 2004


   NOTE: Some encodings are not self-describing.  Thus the
   implementation relies on filename extension conventions for
   determining the media type.

   Note that RFC3261 [2] implies that proxies are supposed to pass
   parameters through unchanged. However, be aware that non-conforming
   proxies may strip Request-URI parameters.  That said, given the
   likely scenarios for the mechanisms presented in this document, this
   should not be an issue.  Most likely, the proxy inserting the
   parameters is the last proxy before the media server.  If the service
   provider deploys a proxy for load balancing or service location
   purposes, the service provider should ensure their choice of proxy
   preserves parameters.

   The form of the SIP Request URI for announcements is as follows. Note
   that the backslash, CRLF, and spacing before the "play=" in the
   example is for readability purposes only.

   sip:__sip-annc@ms2.example.net; \
       play=http://audio.example.net/allcircuitsbusy.g711

   sip:__sip-annc@ms2.example.net; \
       play=file://fileserver.example.net/geminii/yourHoroscope.wav


3.1 Operation

   The scenarios below assume there is a SIP Proxy, application server,
   or media gateway controller between the caller and the media server.
   However, the announcement service works as described below even if
   the caller invokes the service directly.  We chose to discuss the
   proxy case, as it will be the most common case.

   The caller issues an INVITE to the serving SIP Proxy.  The SIP Proxy
   determines what audio prompt to play to the caller.  The proxy
   responds to the caller with 100 TRYING.

   The proxy issues an INVITE to the media server, requesting the
   appropriate prompt to play coded in the play= parameter. The media
   server responds with 200 OK.  The proxy relays the 200 OK to the
   caller.  The caller then issues an ACK.  The proxy then relays the
   ACK to the media server.

   With the call established, the media server plays the requested
   prompt.  When the media server completes the play of the prompt, it
   issues a BYE to the proxy.  The proxy then issues a BYE to the
   caller.




Burger (Ed.), et al.    Expires September 14, 2004              [Page 7]


Internet-Draft             SIP Media Services                 March 2004


3.2 Protocol Diagram

   Caller                   Proxy                 Media Server
     |   INVITE               |                        |
     |----------------------->|   INVITE               |
     |   100 TRYING           |----------------------->|
     |<-----------------------|   200 OK               |
     |   200 OK               |<-----------------------|
     |<-----------------------|                        |
     |   ACK                  |                        |
     |----------------------->|   ACK                  |
     |                        |----------------------->|
     |                        |                        |
     |              Play Announcement (RTP)            |
     |<================================================|
     |                        |                        |
     |                        |   BYE                  |
     |   BYE                  |<-----------------------|
     |<-----------------------|                        |
     |   200 OK               |    200 OK              |
     |----------------------->|----------------------->|
     |                        |                        |


3.3 Formal Syntax

   The following syntax specification uses the augmented Backus-Naur
   Form (BNF) as described in RFC2234 [6].

   ANNC-URL        = sip-ind annc-ind "@" hostport
                       annc-parameters uri-parameters

   sip-ind         = "sip:" / "sips:"
   annc-ind        = "__sip-annc"

   annc-parameters = ";" play-param [ ";" content-param ]
                                    [ ";" delay-param]
                                    [ ";" duration-param ]
                                    [ ";" repeat-param ]
                                    [ ";" locale-param ]
                                    [ ";" variable-params ]
                                    [ ";" extension-params ]

   play-param      = "play=" prompt-url

   content-param   = "content-type=" MIME-type

   delay-param     = "delay=" delay-value



Burger (Ed.), et al.    Expires September 14, 2004              [Page 8]


Internet-Draft             SIP Media Services                 March 2004


   delay-value     = 1*DIGIT

   duration-param  = "duration=" duration-value

   duration-value  = 1*DIGIT

   repeat-param    = "repeat=" repeat-value

   repeat-value    = 1*DIGIT

   locale-param    = "locale=" token
                        ; per RFC3066, usually
                        ; ISO639-1_ISO3166-1
                        ; e.g., en, en_US, en_UK, etc.

   variable-params = param-name "=" variable-value

   param-name      = "param" DIGIT ; e.g., "param1"

   variable-value  = 1*(ALPHA | DIGIT)

   extension-params = extension-param [ ";" extension-params ]

   extension-param  = token "=" token

   "uri-parameters" is the SIP Request-URI parameter list as described
   in RFC3261 [2].  All parameters of the Request URI are part of the
   URI matching algorithm.

   The MIME-type is the MIME [7] content type for the announcement, such
   as audio/basic, audio/G729, audio/mpeg, video/mpeg, and so on.

   To date, none of the IETF audio MIME registrations have parameters.
   Vendor-specific registrations, such as audio/x-wav, do have
   parameters.  However, they are not strictly needed for prompt
   fetching.

   On the other hand, the prevalence of parameters may change in the
   future.  In addition, existing video registrations have parameters,
   such as video/DV.  To accommodate this, and retain compatibility with
   the SIP URI structure, the MIME-type parameter separator (semicolon,
   %3b) and value separator (equal, %d3) MUST be escaped.  For example:

   sip:__sip-annc@ms.example.net; \
       play=file://fs.example.net/clips/my-intro.dvi; \
       content-type=video/mpeg%3bencode%d3314M-25/625-50

   The locale-value consists of a tag as specified in RFC3066 [3].



Burger (Ed.), et al.    Expires September 14, 2004              [Page 9]


Internet-Draft             SIP Media Services                 March 2004


   The definition of hostport is as specified by RFC3261 [2].

   The syntax of prompt-url consists of a URL scheme as specified by
   RFC2396 [8] or a special token indicating a provisioned announcement
   sequence. For example, the URL scheme MAY include any of the
   following.
   o  http/https
   o  ftp
   o  file (referencing a local, NFS (RFC3010 [15]), or AFS file)
   o  nfs (RFC2224 [16])

   If a provisioned announcement sequence is to be played the value of
   prompt-url will have the following form:

   prompt-url      = "/provisioned/" announcement-id

   announcement-id = 1*(ALPHA | DIGIT)

   Note that the scheme "/provisioned/" was chosen because of a
   hesitation to register a "provisioned:" URI scheme.

   This document is strictly focused on the SIP interface for the
   announcement service and as such does not detail how announcement
   sequences are provisioned or defined.

   Note that the media type of the object the prompt-url refers to can
   be most anything, including audio file formats, text file formats, or
   URI lists.  See the Prompt and Collect Service (Section 4) section
   for more on this topic.

4. Prompt and Collect Service

   This service is also known as a voice dialog.  It establishes an
   aural dialog with the user.

   The dialog service follows the model of the announcement service.
   However, the service indicator is "__sip-dialog".  The dialog service
   takes a parameter, voicexml=, indicating the URI of the VoiceXML
   script to execute.

   sip:__sip-dialog@mediaserver.example.net; \
       voicexml=http://vxmlserver.example.net/cgi-bin/script.vxml

   A Media Server MAY accept additional SIP request URI parameters and
   deliver them to the VoiceXML interpreter session as session
   variables.

   Although not good VoiceXML programing practice, VoiceXML scripts



Burger (Ed.), et al.    Expires September 14, 2004             [Page 10]


Internet-Draft             SIP Media Services                 March 2004


   might contain sensitive information, such as a user's pass code in a
   DTMF grammar.  Thus the media server MUST support the https scheme
   for the voicexml parameter for secure fetching of scripts.  Likewise,
   dynamic grammars often do have user identifying information.  As
   such, the VoiceXML browser implementation on the media server MUST
   support https fetching of grammars and subsequent documents.

   Returned information often is sensitive.  For example, the
   information could be financial information or instructions.  Thus the
   media server MUST support https posting of results.

4.1 Formal Syntax for Prompt and Collect Service

   The following syntax specification uses the augmented Backus-Naur
   Form (BNF) as described in RFC2234 [6].

   DIALOG-URL        = sip-ind dialog-ind "@" hostport
                          dialog-parameters

   sip-ind           = "sip:" / "sips:"
   dialog-ind        = "__sip-dialog"

   dialog-parameters = ";" dialog-param [ vxml-parameters ]
                                        [ uri-parameters ]

   dialog-param      = "voicexml=" dialog-url

   vxml-parameters   = vxml-param [ vxml-parameters ]

   vxml-param        = ";" vxml-keyword "=" vxml-value

   vxml-keyword      = token

   vxml-value        = token

   The dialog-url is the URI of the VoiceXML script.  If present, other
   parameters get passed to the VoiceXML interpreter session with the
   assigned vxml-keyword vxml-value pairs.  Note that all vxml-keywords
   MUST have values.

   If there is a vxml-keyword without a corresponding vxml-value, the
   media server MUST reject the request with a 400 BAD REQUEST response
   code.  In addition, the media server MUST state "Missing VXML Value"
   in the reason phrase.

   The media server presents the parameters as environment variables in
   the connection object.  Specifically, the parameter appears in the
   connection.sip tree.



Burger (Ed.), et al.    Expires September 14, 2004             [Page 11]


Internet-Draft             SIP Media Services                 March 2004


   If the Media Server does not support the passing of keyword-value
   pairs to the VoiceXML interpreter session, it MUST ignore the
   parameters.

   "uri_parameters" is the SIP Request-URI parameter list as described
   in RFC3261 [2].  All parameters in the parameter list, whether they
   come from uri-parameters or from vxml-keyworks, are part of the URI
   matching algorithm.

5. Conference Service

   One identifies mixing sessions through their SIP request URIs. To
   create a mixing session, one sends an INVITE to a request URI that
   represents the session.  If the URI does not already exist on the
   media server and the requested resources are available, the media
   server creates a new mixing session.  If there is an existing URI for
   the session, then the media server interprets it as a request for the
   new session to join the existing session. The form of the SIP request
   URI for conferencing is:

   sip:__sip-conf=uniqueIdentifier@mediaserver.example.net

   The left-hand side of the request URI is actually the username of the
   request in the request URI and the To header.  The host portion of
   the URI identifies a particular media server.  The "__sip-conf" user
   name conveys to the media server that this is a request for the
   mixing service.  The uniqueIdentifier can be any value that is
   compliant with the SIP URI specification.  It is the responsibility
   of the conference control application to ensure the identifier is
   unique within the scope of any potential conflict.

   In the terminology of the conferencing framework
   conferencing-framework [14], this URI convention tells the media
   server that the application server is requesting it to act as a
   Focus.  The conf-id value identifies the particular focus instance.

   As a focus in the conferencing framework, the media server MUST
   support the ";isfocus" parameter in the Request URI.  Note however,
   that the presence or absence of the ";isfocus" parameter has no
   protocol impact at the media server.

   It is worth noting that the conference URI shared between the
   application and media servers provides enhanced security, as the SIP
   control interface does not have to be exposed to participants. It
   also allows the assignment of a specific media server to be delayed
   as long as possible, thereby simplifying resource management.

   One can add additional legs to the conference by INVITEing them to



Burger (Ed.), et al.    Expires September 14, 2004             [Page 12]


Internet-Draft             SIP Media Services                 March 2004


   the above mentioned request URI.  Per the matching rules of RFC3261
   [2], the conf-id parameter is part of the matching string.

   Conversely, one can remove legs by issuing a BYE in the corresponding
   dialog.  The mixing session, and thus the conference-specific request
   URI, remains active so long as there is at least one SIP dialog
   associated with the given request URI.

   If the Request-URI has "__sip-conf" as the user part, but does not
   have a conf-id parameter, the media server MUST respond with a 404
   NOT FOUND.
      NOTE: The media server could create a unique conference instance
      and return the conf-id string to the UAC if there is no conf-id
      present.  However, such an operation may have other operational
      issues, such as permissions and billing.  Thus an application
      server or proxy is a better place to do such an operation.
      Moreover, such action would make the media server into a
      Conference Factory in the terminology of conference-framework
      [14].  That is not the appropriate behavior for a media server.

   Since some conference use cases, such as business conferencing, have
   billing implications, the media server SHOULD authenticate the
   application server or proxy.  At a minimum, the media server MUST
   implement sip: digest authentication and sips:.

5.1 Protocol Diagram

   This diagram shows the establishment of a three-way conference. This
   section is informative.  It is only one method of establishing a
   conference.  This example shows a simple back-to-back user agent.

   The conference-framework [14] describes additional parameters and
   behaviors of the Application Server.  For example, the first INVITE
   from P1 to the Application Server would include the ";isfocus"
   parameter; the Application Server would act as a Conference Factory;
   and so on.  However, none of that protocol machinery has an impact on
   the operation of the Application Server to Media Server interface,
   which is the focus of this protocol document.

    P1       P2        P3         Application Server     Media Server
     |       |        |                  |                   |
     |  INVITE sip:public-conf@as.example.net                |
     |---------------------------------->|                   |
     |       |      INVITE sip:__sip-conf=123@ms.example.net |
     |       |        |                  |------------------>|
     |       |        |                  | 200 OK            |
     |  200 OK        |                  |<------------------|
     |<----------------------------------|                   |



Burger (Ed.), et al.    Expires September 14, 2004             [Page 13]


Internet-Draft             SIP Media Services                 March 2004


     |       |        | RTP w/ P1        |                   |
     |<=====================================================>|
     |       |        |                  |                   |
     |  INVITE sip:public-conf@as.example.net                |
     |       |-------------------------->|                   |
     |       |      INVITE sip:__sip-conf=123@ms.example.net |
     |       |        |                  |------------------>|
     |       |        |                  | 200 OK            |
     |       | 200 OK |                  |<------------------|
     |       |<--------------------------|                   |
     |       |        |                  |                   |
     |       |        | RTP w/ P1+P2-P2  |                   |
     |       |<=============================================>|
     |       |        | RTP w/ P1+P2-P1  |                   |
     |<=====================================================>|
     |       |        |                  |                   |
     |  INVITE sip:public-conf@as.example.net                |
     |       |        |----------------->|                   |
     |       |      INVITE sip:__sip-conf=123@ms.example.net |
     |       |        |                  |------------------>|
     |       |        |                  | 200 OK            |
     |       |        | 200 OK           |<------------------|
     |       |        |<-----------------|                   |
     |       |        |                  |                   |
     |       |        | RTP w/ P1+P2+P3-P3                   |
     |       |        |<====================================>|
     |       |        | RTP w/ P1+P2+P3-P2                   |
     |       |<=============================================>|
     |       |        | RTP w/ P1+P2+P3-P1                   |
     |<=====================================================>|
     |       |        |                  |                   |
     |       |        |                  |                   |

   Using the terminology of conference-framework [14], the Application
   Server is the Conference Factory and the Media Server is the
   Conference Focus.

   Note that the above call flow does not show any 100 TRYING messages
   that would typically flow from the Application Server to the UAC's,
   nor does it show the ACK's from the UAC's to the Application Server
   or from the Application Server to the Media Server.

   Each leg can drop out either under the supervision of the UAC by the
   UAC sending a BYE or under the supervision of the Application Server
   by the Application Server issuing a BYE. In either case, the
   Application Server will either issue a BYE on behalf of the UAC or
   issue it directly to the Media Server, corresponding to the
   respective disconnect case.



Burger (Ed.), et al.    Expires September 14, 2004             [Page 14]


Internet-Draft             SIP Media Services                 March 2004


   It is left as a trivial exercise to the reader for how the
   Application Server can mute legs, create side conferences, and so
   forth.

   Note that the Application Server is a server to the participants
   (UAC's).  However, the Application Server is a client for mixing
   services to the Media Server.

5.2 Formal Syntax

   The following syntax specification uses the augmented Backus-Naur
   Form (BNF) as described in RFC2234 [6].

   CONF-URL        = sip-ind conf-ind "=" instance-id "@" hostport
                     [ uri_parameters ]

   sip-ind         = "sip:" / "sips:"

   conf-ind        = "__sip-conf"

   instance-id     = token

   "uri-parameters" is the SIP Request-URI parameter list as described
   in RFC3261 [2].  All parameters in the parameter list are part of the
   URI matching algorithm.

6. The User Part

   There has been considerable debate about the wisdom of using fixed
   user parts in a request URI.  The most common objection is that the
   user part should be opaque and a local matter.  The other objection
   is that using a fixed user part removes those specified user
   addresses from the user address space.

   We address the latter issue first.  The common example is the
   Postmaster address defined by RFC2821 [17].  The objection is that by
   using the Postmaster token for something special, one removes that
   token for anyone.  Thus, the Postmaster General of the United States,
   for example, cannot have the mail address Postmaster@usps.gov.  One
   may debate whether this is a significant limitation, however.

   One may point out that "__sip-annc", for example, has the potential
   for conflict.  Clearly, with the use of underbars, sip, and a hyphen,
   this conflict is much smaller than the potential for a conflict like
   "Postmaster".

   The key point is, one cannot confuse the namespace at a Media Server
   with the namespace for an organization.



Burger (Ed.), et al.    Expires September 14, 2004             [Page 15]


Internet-Draft             SIP Media Services                 March 2004


   For example, let us take the case where a network offers services for
   "Ann Charles".  She likes to use the name "__sip-annc", and thus she
   would like to use "sip:__sip-annc@example.net".  We offer that there
   is ABSOLUTELY NO NAME COLLISION WHATSOEVER.  Why is this so?  This is
   so because sip:__sip-annc@example.net will resolve to the specific
   user at a specific device for Ann.  As an example, example.net's SIP
   Proxy Server resolves sip:__sip-annc@example.net to
   __sip-annc@anns-phone.example.net .  One directs requests for the
   media service __sip-annc directly to the Media Server, e.g.,
   sip:__sip-annc@ms21.ap.example.net .  Moreover, by definition, Ann
   Charles, or anything other than the announcement service, will NEVER
   be directly on the Media Server.  If that were not true, no phone in
   the world could use the user part "eburger", as eburger is a reserved
   user part in the SnowShore domain.

   Here is another way of looking at this issue.  Unix reserves the
   special user "root".  Just about all Unix machines have a user root,
   who has an address "root@a-specific-machine.example.com", where
   "a-specific-machine" is the fully-qualified domain name (FQDN) of a
   particular instance of a machine.  There are very well-defined
   semantics for the "root" user.

   Even though most every Unix machine has a "root" user, often there is
   no mapping for a "root" user in a domain, such as "root@example.com".
   Conversely, there is no restriction on creating a MX record for
   "root@example.com".  That choice is fully up to the administrative
   authority for the domain.

   The "users" proposed by this document, "__sip-annc", "__sip-conf",
   and "__sip_dialog" are all users at a Media Server, just as the
   "root", "bin", and "nobody" users are "users" at a Unix host.

   After much discussion, with input from the W3C URI work group, we
   agreed to obfuscate the user name by prepending "__sip-" to the user
   name.  Note well that as explained above, this obfuscation is not
   necessary.  There is a fundamental difference between a user name at
   a device and a user name at a MX record (SMTP) or Address-of-Record
   (SIP).  However, for those that are concerned that the name on the
   device may "leak out" into the SIP routing network, this obfuscation
   dramatically reduces the potential for a conflict.

   The most important thing to note about this convention is that the
   left-hand side of the request URI is opaque to the network.  The only
   network elements that need to know about the convention are the Media
   Server and client.

   Some have proposed that such naming be a pure matter of local
   convention.  For example, the thesis of the informational RFC3087



Burger (Ed.), et al.    Expires September 14, 2004             [Page 16]


Internet-Draft             SIP Media Services                 March 2004


   [18] is that you can address services using a request URI.  However,
   some have taken the examples in the document to an extreme.  Namely,
   that the only way to address services is via arbitrary, opaque, long
   user parts.  It is possible to provision the service names, rather
   than fixed names.  While this can work in a closed network, where the
   Application Servers and Media Servers are in the same administrative
   domain, this does not work across domains.  This is because the
   client of the media service has to know the local name for each
   service / domain pair.  This is particularly onerous for situations
   where there is an ad hoc relationship between the application and the
   media service.  Without a well-known relationship between service and
   service address, how would the client locate the service?

   One very important result of using the user part as the service
   descriptor is that we can use all of the standard SIP machinery,
   without modification.  For example, Media Servers with different
   capabilities can SIP Register their capabilities as users.  For
   example, a mixing-only device will register the "__sip-conf" user,
   while a multi-purpose Media Server will register all of the users.
   Note that this is why the URI to play is a parameter.  Doing
   otherwise would overburden a normal SIP proxy or redirect server.
   Likewise, this scheme lets us leverage the standard SIP proxy
   behavior of using an intelligent redirect server or proxy server to
   provide high-available services.  For example, two Media Servers can
   register with a SIP redirect server for the __sip-annc user.  If one
   of the Media Servers fails, the registration will expire and all
   requests for the announcement service ("calls to the __sip-annc
   user") get sent to the surviving Media Server.

7. Security Considerations

   Exposing network services with well-known addresses may not be
   desirable.  The Media Server SHOULD authenticate and authorize
   requesting endpoints per local policy.

   Some interactions in this document result in the transfer of
   confidential information.  Moreover, many of the interactions require
   integrity protection.  Thus the Media Server MUST implement digest
   authentication for the sip: scheme and MUST implement the sips:
   scheme.  in addition, application developers are RECOMMENDED to use
   the security services offered by the Media Server to ensure the
   integrity and confidentiallity of their user's data, as appropriate.

   Untrusted network elements could use the protocol described here for
   providing information services.  Many extant billing arrangements are
   for completed calls.  Successful call completion occurs with a 2xx
   result code.  This can be an issue for the early media announcement
   service.  This is one of the reasons why the early media announcement



Burger (Ed.), et al.    Expires September 14, 2004             [Page 17]


Internet-Draft             SIP Media Services                 March 2004


   service is deprecated.

8. Contributors

   Jeff Van Dyke and Andy Spitzer of SnowShore did just about all of the
   work developing netann, in conjunction with many application
   developers, media server manufacturers, and service providers, some
   of whom are listed in the Acknowledgements section.  All I did was do
   the theory and write it up.  That also means all of the mistakes are
   mine, as well.

9. Acknowledgements

   We would like to thank Kevin Summers and Ravindra Kabre of Sonus
   Networks for their constructive comments, as well as Jonathan
   Rosenberg of Dynamicsoft and Tim Melanchuk of Convedia for their
   encouragement. In addition, the discussion at the Las Vegas Interim
   Workgroup Meeting in 2002 was invaluable for clearing up the issues
   surrounding the left-hand-side of the request URI.  Christer Holmberg
   helped tune the language of the multimedia announcement service.
   Orit Levin from Radvision gave a close read on the most recent
   version of the draft document. Pete Danielsen from Lucent has
   consistently provided excellent reviews of the many of the different
   versions of this document.

   Pascal Jalet provided the theoretical underpinning and David Rio
   provided the experimental evidence for why the conference identifier
   belongs in the user part of the request-URI.

   I am particularly indebted to Alan Johnston for his review of this
   document and ensuring its conformance with the SIP conference control
   work in the IETF.

   The authors would like to give a special thanks to Walter O'Connor
   for doing much of the initial implementation.

Normative References

   [1]  Bradner, S., "Key words for use in RFCs to Indicate Requirement
        Levels", BCP 14, RFC 2119, March 1997.

   [2]  Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A.,
        Peterson, J., Sparks, R., Handley, M. and E. Schooler, "SIP:
        Session Initiation Protocol", RFC 3261, June 2002.

   [3]  Alvestrand, H., "Tags for the Identification of Languages", BCP
        47, RFC 3066, January 2001.




Burger (Ed.), et al.    Expires September 14, 2004             [Page 18]


Internet-Draft             SIP Media Services                 March 2004


   [4]  ISO, "Codes for the representation of names of languages -- Part
        1: Alpha-2 code", ISO 639-1, July 2002.

   [5]  ISO, "Codes for the representation of names of countries and
        their subdivisions -- Part 1: Country codes", ISO 3166-1,
        October 1997.

   [6]  Crocker, D. and P. Overell, "Augmented BNF for Syntax
        Specifications: ABNF", RFC 2234, November 1997.

   [7]  Borenstein, N. and N. Freed, "MIME (Multipurpose Internet Mail
        Extensions) Part One: Mechanisms for Specifying and Describing
        the Format of Internet Message Bodies", RFC 1521, September
        1993.

   [8]  Berners-Lee, T., Fielding, R. and L. Masinter, "Uniform Resource
        Identifiers (URI): Generic Syntax", RFC 2396, August 1998.

   [9]  Rosenberg, J. and H. Schulzrinne, "Reliability of Provisional
        Responses in Session Initiation Protocol (SIP)", RFC 3262, June
        2002.

Informative References

   [10]  World Wide Web Consortium, "Voice Extensible Markup Language
         (VoiceXML) Version 2.0", W3C Candidate Recommendation ,
         February 2003, <http://www.w3.org/TR/2003/
         CR-voicexml20-20030220/>.

   [11]  Burger, E. and M. Dolly, "Keypad Stimulus Protocol (KPML)",
         draft-ietf-sipping-kpml-02 (work in progress), February 2004.

   [12]  Burger, E., Van Dyke, J. and A. Spitzer, "Media Server Control
         Markup Language and Protocol", draft-vandyke-mscml-03 (work in
         progress), July 2003.

   [13]  Schulzrinne, H., Casner, S., Frederick, R. and V. Jacobson,
         "RTP: A Transport Protocol for Real-Time Applications", RFC
         1889, January 1996.

   [14]  Rosenberg, J., "A Framework for Conferencing with the Session
         Initiation Protocol",
         draft-ietf-sipping-conferencing-framework-00 (work in
         progress), May 2003.

   [15]  Shepler, S., Callaghan, B., Robinson, D., Thurlow, R., Beame,
         C., Eisler, M. and D. Noveck, "NFS version 4 Protocol", RFC
         3010, December 2000.



Burger (Ed.), et al.    Expires September 14, 2004             [Page 19]


Internet-Draft             SIP Media Services                 March 2004


   [16]  Callaghan, B., "NFS URL Scheme", RFC 2224, October 1997.

   [17]  Klensin, J., "Simple Mail Transfer Protocol", RFC 2821, April
         2001.

   [18]  Campbell, B. and R. Sparks, "Control of Service Context using
         SIP Request-URI", RFC 3087, April 2001.

   [19]  Handley, M., Schulzrinne, H., Schooler, E. and J. Rosenberg,
         "SIP: Session Initiation Protocol", RFC 2543, March 1999.

   [20]  Charlton, N., Gasson, M., Gybels, G., Spanner, M. and A. van
         Wijk, "User Requirements for the Session Initiation Protocol
         (SIP) in Support of Deaf, Hard of Hearing and Speech-impaired
         Individuals", RFC 3351, August 2002.


Authors' Addresses

   Eric Burger
   SnowShore Networks, Inc.
   285 Billerica Rd.
   Chelmsford, MA  01824-4120
   USA

   EMail: e.burger@ieee.org


   Jeff Van Dyke
   SnowShore Networks, Inc.
   285 Billerica Rd.
   Chelmsford, MA  01824-4120
   USA

   EMail: jvandyke@snowshore.com


   Andy Spitzer
   SnowShore Networks, Inc.
   285 Billerica Rd.
   Chelmsford, MA  01824-4120
   USA

   EMail: woof@snowshore.com







Burger (Ed.), et al.    Expires September 14, 2004             [Page 20]


Internet-Draft             SIP Media Services                 March 2004


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights. Information
   on the IETF's procedures with respect to rights in IETF Documents can
   be found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard. Please address the information to the IETF at
   ietf-ipr@ietf.org.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2004). This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.




Burger (Ed.), et al.    Expires September 14, 2004             [Page 21]