Internet-Draft draft-dong-remote-driving-usecase-00 June 2022
Dong, et al. Expires 29 December 2022 [Page]
Workgroup:
Independent Submission
Internet-Draft:
draft-dong-remote-driving-usecase-00
Published:
Intended Status:
Informational
Expires:
Authors:
L. Dong
Futurewei Technologies Inc.
R. Li
Futurewei Technologies Inc.
J. Hong
ETRI

Use Case of Remote Driving and its Network Requirements

Abstract

This document illustrates the use case of remote driving that leverages the human driver's advanced perceptual and cognitive skills to enhance autonomous driving when it is absent or falls short. Specifically the document analyzes the end-to-end latency that is required in the network to support collision avoidance in remote driving. The document also summarizes the other necessary requirements that the networking services shall support.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 29 December 2022.

1. Introduction to Autonomous Vehicles

Autonomous vehicles (AV) have made great progress in the recent years, which rely on numerous well-placed sensors that continuously detect, observe the location and movement of surrounding vehicles, conditions on the road, pedestrians, traffic lights, etc. Autonomous vehicle can be controlled by its own central computer, which manipulates the steering, accelerator, and brake, achieving self-driving in different levels.

SAE International's new standard "J3016: Taxonomy and Definitions for Terms Related to On-Road Motor Vehicle Automated Driving Systems" defines six LoAs (Level of Automation) [SAEJ3016], including full automation (level 5), high automation (level 4), conditional automation (level 3), partial automation (level 2), driver assistance (level 1), and no automation (level 0).

Although each vehicle manufacturer has been taking its best effort of making progress in increasing the level of automation, the current automated vehicles by themselves can only fit into the SAE classification 2 or 3. AVs may fail short in unexpected situations. In such cases, it is desirable that humans can operate the vehicle manually to recover from a failure situation through remote driving. Until the autonomous technology becomes mature enough to be level 5, the experts suggest AVs should be backed up by tele-operations.

2. Terms and Abbreviations

The terms and abbreviations used in this document are listed below.

  • AI: Artificial Intelligence
  • AV: Autonomous Vehicle
  • BE: Best-Effort
  • GPS: Global Positioning System

The above terminology is defined in greater details in the remainder of this document.

3. Remote Driving

Remote driving is a mechanism in which a human driver operates a vehicle from a distance through communication networks. Remote driving leverages the human driver's advanced perceptual and cognitive skills to further assist the autonomous driving when it falls short, and overcomes many complex situations that computer vision or artificial intelligence could not foresee or apprehend. Such situations and possible failures of autonomous driving include: (1) perception failure at night or under challenging weather conditions, e.g., low visibility due to fog, lane markers are covered by snow; (2) confusing or malfunctioning traffic lights, unrecognizable traffic signs due to corrosion or graffiti; (3) Confusing detour signs or complex instructions temporarily ordered by police officers, which require extra knowledge about the local traffic and understanding of the local construction works; (4) Complex or confusing parking signs, which might be handwritten and hard to be understood by computers. Parking might only be allowed on certain dates during the week, or parking lots are only permissible for certain types of vehicles. With remote driving being added to the AV control loop, passengers could feel safe enough.

Remotely operated vehicles may also be of interest to personal transportation services. Vay, a Berlin-based startup [Vay] plans to debut a fleet of taxis controlled by remote teledrivers by 2022. The concept behind Vay is that when you order a Vay, one of teledrivers is tasked to navigate one Vay to your pickup location. Then you take control the Vay. After you reach your destination, the teledriver takes control of the Vay and deliver it to the next nearby customer. During the whole transaction, the remote driving takes place for Vay delivery. This is advertised to happen at the initial roll-out stage, the Vay might be remotely controlled by teledrivers to drive the customers around in the future stages when the technologies are mature enough. Vay's system is promised to be built safer than conventional driving by controlling the top four causes of fatal urban accidents, which are driving under the influence, speeding, distraction, and fatigue.

Remotely operated trunks could possibly eliminate the threats to road safety, driver/passenger safety that are caused by fleet driver fatigue during long drives. Remotely operated vehicles are also particularly useful compared to autonomous trunking [Tusimple] in situations where it would be hazardous or impossible for humans to operate in, for example, construction vehicles in remote sites or emergency service vehicles in areas that are affected by chemical spills, by active wildfires, or by hurricane conditions.

A remotely controlled vehicle needs to transit necessary data in high volumes to the remote operation center which might be located in edge cloud or central cloud. The data includes all the sensory feeds that the autonomous vehicle itself could collect. Signals from GPS (Global Positioning System) satellites could be combined with reading from tachometers, altimeters, and gyroscopes to provide more accurate positioning of the vehicle. Radar sensors monitor the positions of other vehicles nearby. Lidar (Light Detection and Ranging) sensors bounce pulses of light off the surroundings to identify lane markings and road boundaries. Ultrasonic sensors are used to measure the position of objects that are very close to the vehicle. Video cameras consistently take pictures of the surroundings from different angles. Volumetric data from vehicles are sent from the vehicles to the remote driving center to provide the remote driver with adequate perception of the environment. The remote driver can then provide appropriate instructions to help the autonomous vehicle resolve the issues.

3.1. Collision Avoidance in Remote Driving

In this section, we use a specific collision avoidance scenario in remote driving as shown in Figure 1 to illustrate that the network and its protocols need to provide the necessary support. There are many similar use cases that have already been specified in [TR22.885] and [TR22.886].

  ______                                           [   ]
 /|_||_\`.__                                       [   ]
(   _    _ _\ <----Collision Avoidance Distance--->[   ]
=`-(_)--(_)-'                                      [ P ]
          .-~~~-.
  .- ~ ~-(       )_ _
 /                     ~ -.
|       Networks           \
 \                         .'
   ~- . _____________ . -~
                    +------+
                    +Remote+
                    +driver+
                    +------+

Figure 1

Given the current technologies in sensing, encoding and decoding, together with the Best Effort (BE) service provided in the current Internet, the total roundtrip delay between the time when the roadside camera captures picture of pedestrian on the crossroad and the time when the self-driving car receives the signal to brake is around 250-400 ms. On the other hand, the latency already incurred by the remote driver's reaction time also adds the total latency, adding to the distance required for the vehicle to come to a stop. The detailed breakdown of the total latency is shown as below:

  • Image capture, encoding, decoding and display: 100 ms [Nuvation] [Sensoray];
  • Remote driver's reaction time: 100 ms;
  • Total transmission time in the network: 50-200 ms, which includes the time for the image data to reach the remote driver as well as the time for the command to reach the vehicle [VerizonNetwork] [Candela2020]; The image data could be encapsulated in multiple packets, depending on the image resolution and size. Thus the total transmission time in the network might involve 2 or more packets transmission. With the best-effort nature of the current Internet, the total transmission time is not determined and changes at per packet basis, might for example range between 50ms to 200 ms.
  • Total: 250-400 ms.

The collision avoidance distance is proportional to the vehicle speed. For example, if the car is driving at 60 km/hour, the collision avoidance distance must be longer than 7 meters, in other words, the self-driving car must start to brake more than 7 meters away from the pedestrians. Table 1 shows the calculation of collision avoidance distance based on the vehicle's speed and the current total latency.

If the vehicle is driving at higher speed (e.g., 80 km/hour) and for it to start to brake at shorter distance away from the pedestrians (e.g., 4 meters), the total round-trip delay needs to be much shortened (e.g., 4/(80/3600)=180 ms). Assuming with the technologies advancement, the total time needed for sensory image capture, framing and encoding, decoding and display is reduced to 60 ms, the total transmission time in the network cannot be longer than 20 ms precisely. Within the 20 ms, the captured image or video data, and other sensory data need to arrive the remote server, the command from the remote driver needs to reach the vehicle as well.

Table 1: Collision avoidance distance based on vehicle's speed
Speed Collision Avoidance Distance
5 km/hour = 1.4 m/sec 1.4*0.4 = 0.56 m
30 km/hour = 8.4 m/sec 8.4*0.4 = 3.36 m
60 km/hour = 16.8 m/sec 16.8*0.4 = 6.72 m
80 km/hour = 22.3 m/sec 22.3*0.4 = 8.92 m
120 km/hour = 33.4 m/sec 33.4*0.4 = 13.36 m

4. Network Requirements

The following requirements need to be supported by the networks:

  • The networking services shall support multiple concurrent flow streams at high data rates and volumetric data transmission from vehicles with high mobility.
  • The networks shall deliver services with service level objectives, specifically latency objectives. The latency objectives are required to be precisely guaranteed and highly reliable, not just "optimized" but quantifiable.
  • The network shall be able to identify the packets which carry urgent information and treat them in a differentiated manner with highest priority
  • The networking services shall reduce and even avoid dropping/re-transmission of packets with high significance. Packet loss of certain urgent packets are not permissible in the network.

5. IANA Considerations

This document requires no actions from IANA.

6. Security Considerations

This document introduces no new security issues.

7. Acknowledgements

8. Informative References

[Candela2020]
Candela, M., Luconi, V., and A. Vecchio, "Impact of the COVID-19 pandemic on the Internet latency: A large-scale study", Computer Networks, vol. 182, no. 11, , <hhttps://doi.org/10.1016/j.comnet.2020.107495>.
[Nuvation]
"Video Capture and Display", , <https://www.nuvation.com/industrial-video-capture-display-system>.
[SAEJ3016]
"Taxonomy and Definitions for Terms Related to Driving Automation Systems for On-Road Motor Vehicles, SAE J3016_202104", , <sae.org/standards/content/j3016_202104/>.
[Sensoray]
Eberlein, P., "Video Latency, What It Is and Why It's Important", , <https://www.nuvation.com/industrial-video-capture-display-system>.
[TR22.885]
"Study on LTE support for Vehicle to Everything (V2X) services, 3GPP TR 22.885", , <https://www.3gpp.org/ftp/Specs/archive/22_series/22.885/>.
[TR22.886]
"Study on enhancement of 3GPP Support for 5G V2X Services, 3GPP TR 22.886", , <https://www.3gpp.org/ftp/Specs/archive/22_series/22.886/>.
[Tusimple]
"TuSimple Autonomous Trucking", , <https://www.tusimple.com/>.
[Vay]
"A New Approach to Driverless mobility", , <https://vay.io/>.
[VerizonNetwork]
"Verizon Network Latency Statistics", , <https://www.verizon.com/business/solutions/business-continuity/weekly-latency-statistics/>.

Authors' Addresses

Lijun Dong
Futurewei Technologies Inc.
Richard Li
Futurewei Technologies Inc.
Jungha Hong
ETRI