Network Working Group O. Friel
Internet-Draft R. Barnes
Intended status: Standards Track Cisco
Expires: April 25, 2020 T. Hollebeek
DigiCert
October 23, 2019
ACME for Subdomains
draft-friel-acme-subdomains-00
Abstract
This document outlines how ACME can be used by a client to obtain a
certificate for a subdomain identifier from a certificate authority.
The client has fulfilled a challenge against a parent domain but does
not need to fulfil a challenge against the explicit subdomain as
certificate authority policy allows issuance of the subdomain
certificate without explicit subdomain ownership proof.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on April 25, 2020.
Copyright Notice
Copyright (c) 2019 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
Friel, et al. Expires April 25, 2020 [Page 1]
Internet-Draft ACME-SUBDOMAINS October 2019
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 2
3. ACME Workflow and Identifier Requirements . . . . . . . . . . 3
4. ACME Issuance of Subdomain Certificates . . . . . . . . . . . 4
4.1. newOrder and newAuthz Handling . . . . . . . . . . . . . 5
4.2. Examples . . . . . . . . . . . . . . . . . . . . . . . . 6
5. Directory Object Metadata Fields Registry . . . . . . . . . . 7
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 7
7. Security Considerations . . . . . . . . . . . . . . . . . . . 8
8. Informative References . . . . . . . . . . . . . . . . . . . 8
Appendix A. CA Browser Forum Baseline Requirements . . . . . . . 8
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 8
1. Introduction
ACME [RFC8555] defines a protocol that a certificate authority (CA)
and an applicant can use to automate the process of domain name
ownership validation and X.509 (PKIX) certificate issuance. The
protocol is rich and flexible and enables multiple use cases that are
not immediately obvious from reading the specification.
This document explicitly outlines how ACME can be used to issue
subdomain certificates, without requiring the ACME client to
explicitly fulfil an ownership challenge against the subdomain
identifiers - the ACME client need only fulfil an ownership challenge
against a parent domain identifier.
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
The following terms are used in this document:
o CA: Certificate Authority
o CSR: Certificate Signing Request
o FQDN: Fully Qualified Domain Name
Friel, et al. Expires April 25, 2020 [Page 2]
Internet-Draft ACME-SUBDOMAINS October 2019
3. ACME Workflow and Identifier Requirements
A typical ACME workflow for issuance of certificates is as follows:
1. client POSTs a newOrder request that contains a set of
"identifiers"
2. server replies with a set of "authorizations" and a "finalize"
URI
3. client sends POST-as-GET requests to retrieve the
"authorizations", with the downloaded "authorization" object(s)
containing the "identifier" that the client must prove control of
4. client proves control over the "identifier" in the
"authorization" object by completing the specified challenge, for
example, by publishing a DNS TXT record
5. client POSTs a CSR to the "finalize" API
6. server replies with an updated order object that includes a
"certificate" URI
7. client sends POST-as-GET request to the "certificate" URI to
download the certificate
ACME places the following restrictions on "identifiers":
o section 7.1.4: the only type of "identifier" defined by the ACME
specification is a fully qualified domain name: "The only type of
identifier defined by this specification is a fully qualified
domain name (type: "dns"). The domain name MUST be encoded in the
form in which it would appear in a certificate."
o Section 7.4: the "identifier" in the CSR request must match the
"identifier" in the newOrder request: "The CSR MUST indicate the
exact same set of requested identifiers as the initial newOrder
request."
o Sections 8.3: the "identifier", or FQDN, in the "authorization"
object must be used when fulfilling challenges via HTTP:
"Construct a URL by populating the URL template ... where the
domain field is set to the domain name being verified"
o Section 8.4: the "identifier", or FQDN, in the "authorization"
object must be used when fulfilling challenges via DNS: "The
client constructs the validation domain name by prepending the
label "_acme-challenge" to the domain name being validated."
Friel, et al. Expires April 25, 2020 [Page 3]
Internet-Draft ACME-SUBDOMAINS October 2019
ACME does not mandate that the "identifier" in a newOrder request
matches the "identifier" in "authorization" objects.
4. ACME Issuance of Subdomain Certificates
As noted in the previous section, ACME does not mandate that the
"identifier" in a newOrder request matches the "identifier" in
"authorization" objects. This means that the ACME specification does
not preclude an ACME server processing newOrder requests and issuing
certificates for a subdomain without requiring a challenge to be
fulfilled against that explicit subdomain. ACME server policy could
allow issuance of certificates for a subdomain to a client where the
client only has to fulfil an authorization challenge for the parent
domain. The relevant sections from current CA/Browser baseline
requirements are given in section Appendix A.
This allows a flow where a client proves ownership of, for example,
"example.com" and then successfully obtains a certificate for
"sub.example.com". The ACME pre-authorization flow makes most sense
for this use case, and that is what is illustrated in the following
call flow.
The client could pre-authorize for the parent domain once, and then
issue multiple newOrder requests for certificates for multiple
subdomains. This call flow illustrates the client only placing one
newOrder request.
The call flow illustrates the DNS-based proof of ownership mechanism,
but the subdomain workflow is equally valid for HTTP based proof of
ownership.
+--------+ +------+ +-----+
| Client | | ACME | | DNS |
+--------+ +------+ +-----+
| | |
STEP 1: Pre-Authorization of parent domain
| | |
| POST /newAuthz | |
| "example.com" | |
|--------------------->| |
| | |
| 201 authorizations | |
|<---------------------| |
| | |
| Publish DNS TXT | |
| "example.com" | |
|--------------------------------->|
| | |
Friel, et al. Expires April 25, 2020 [Page 4]
Internet-Draft ACME-SUBDOMAINS October 2019
| POST /challenge | |
|--------------------->| |
| | Verify |
| |---------->|
| 200 status=valid | |
|<---------------------| |
| | |
| Delete DNS TXT | |
| "example.com" | |
|--------------------------------->|
| | |
STEP 2: Place order for subdomain
| | |
| POST /newOrder | |
| "sub.example.com" | |
|--------------------->| |
| | |
| 201 status=ready | |
|<---------------------| |
| | |
| POST /finalize | |
| CSR "sub.example.com"| |
|--------------------->| |
| | |
| 200 OK status=valid | |
|<---------------------| |
| | |
| POST /certificate | |
|--------------------->| |
| | |
| 200 OK | |
| PKI "sub.example.com"| |
|<---------------------| |
4.1. newOrder and newAuthz Handling
Servers may consider validation of a parent domain sufficient
authorization for a subdomain. If a server has such a policy and a
client is already authorized for the parent domain then:
o If the client submits a newAuthz request for a subdomain: The
server MUST return status 200 (OK) response. The response body is
the existing authorization object for the parent domain with
status set to "valid".
o If the client submits a newOrder request for a subdomain: The
server MUST return a 201 (Created) response. The response body is
Friel, et al. Expires April 25, 2020 [Page 5]
Internet-Draft ACME-SUBDOMAINS October 2019
an order object with status set to "ready" and links to the
unexpired authorizations against the parent domain.
If a server has such a policy and a client is not authorized for the
parent domain then:
o If the client submits a newAuthz request for a subdomain: The
server MUST return a status 201 (Created) response. The response
body is a newly created authorization object for the parent domain
with status set to "pending".
o If the client submits a newOrder request for a subdomain: The
server MUST return a status 201 (Created) response. The response
body is an order object with status set to "pending" and links to
newly created authorizations objects against the parent domain.
[[ TODO: This section documents a change from RFC8555, which states
that the identifier in the newAuthz request MUST match that in the
authorization object.
Additionally, 200 response code is used here in one scenario instead
of a 201 response. However, this is arguably an under-specification
in RFC8555, and has been reported in https://www.rfc-
editor.org/errata/eid5861.
These two items need a review. ]]
4.2. Examples
In order to illustrate subdomain behaviour, let us assume that a
client wishes to get certificates for subdomain identifiers
"sub0.example.com", "sub1.example.com" and "sub2.example.com" under
parent domain "example.com", and CA policy allows certificate
issuance of these subdomain identifiers while only requiring the
client to fulfil an ownership challenge for parent domain
"example.com". Let us also assume that the client has not yet proven
ownership of parent domain "example.com".
1. The client POSTs a newOrder request for identifier
"sub0.example.com"
The server creates an authorization object for identifier
"example.com". The server replies with a 201 (Created) response.
The response body is an order object with status set to "pending" and
a link to newly created authorization object against the parent
domain "example.com". Therefore, the server is instructing the
client to fulfil a challenge against domain identifier "example.com"
Friel, et al. Expires April 25, 2020 [Page 6]
Internet-Draft ACME-SUBDOMAINS October 2019
in order to obtain a certificate including identifier
"sub0.example.com".
The client completes the challenge for "example.com", POSTs a CSR to
the order finalize URI, and downloads the certificate.
1. The client POSTs a newOrder request for identifier
"sub1.example.com"
The server replies with a 201 (Created) response. The response body
is an order object with status set to "ready" and a link to the
unexpired authorization against the parent domain "example.com".
The client POSTs a CSR to the order finalize URI, and downloads the
certificate.
1. The client POSTs a newAuthz request for identifier
"sub2.example.com"
The server replies with a 200 (OK) response. The response body is
the previously created authorization object for "example.com" with
status set to "valid".
5. Directory Object Metadata Fields Registry
[[ TODO: is this required? ]]
An ACME server can advertise support of issuance of subdomain
certificates by including the boolean field
"implicitSubdomainAuthorization" in its "ACME Directory Metadata
Fields" registry. If not specified, then no default value is
assumed. If an ACME server supports issuance of subdomain
certificates, it can indicate this by including this field with a
value of "true".
+--------------------------------+------------+-----------+
| Field Name | Field Type | Reference |
+--------------------------------+------------+-----------+
| implicitSubdomainAuthorization | boolean | RFC XXXX |
+--------------------------------+------------+-----------+
6. IANA Considerations
[[TODO: register implicitSubdomainAuthorization? ]]
Friel, et al. Expires April 25, 2020 [Page 7]
Internet-Draft ACME-SUBDOMAINS October 2019
7. Security Considerations
[[TODO]]
8. Informative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8555] Barnes, R., Hoffman-Andrews, J., McCarney, D., and J.
Kasten, "Automatic Certificate Management Environment
(ACME)", RFC 8555, DOI 10.17487/RFC8555, March 2019,
<https://www.rfc-editor.org/info/rfc8555>.
Appendix A. CA Browser Forum Baseline Requirements
The CA/Browser Forum Baseline Requirements version 1.6.5 states:
o Section: "1.6.1 Definitions": Authorization Domain Name: The
Domain Name used to obtain authorization for certificate issuance
for a given FQDN. The CA may use the FQDN returned from a DNS
CNAME lookup as the FQDN for the purposes of domain validation.
If the FQDN contains a wildcard character, then the CA MUST remove
all wildcard labels from the left most portion of requested FQDN.
The CA may prune zero or more labels from left to right until
encountering a Base Domain Name and may use any one of the
intermediate values for the purpose of domain validation.
o Section: "3.2.2.4.7 DNS Change": Once the FQDN has been validated
using this method, the CA MAY also issue Certificates for other
FQDNs that end with all the labels of the validated FQDN. This
method is suitable for validating Wildcard Domain Names.
Authors' Addresses
Owen Friel
Cisco
Email: ofriel@cisco.com
Friel, et al. Expires April 25, 2020 [Page 8]
Internet-Draft ACME-SUBDOMAINS October 2019
Richard Barnes
Cisco
Email: rlb@ipv.sx
Tim Hollebeek
DigiCert
Email: tim.hollebeek@digicert.com
Friel, et al. Expires April 25, 2020 [Page 9]