Internet-Draft | COSE Key Thumbprint | September 2024 |
Isobe, et al. | Expires 10 March 2025 | [Page] |
- Workgroup:
- COSE
- Internet-Draft:
- draft-ietf-cose-key-thumbprint-06
- Published:
- Intended Status:
- Standards Track
- Expires:
CBOR Object Signing and Encryption (COSE) Key Thumbprint
Abstract
This specification defines a method for computing a hash value over a CBOR Object Signing and Encryption (COSE) Key. It specifies which fields within the COSE Key structure are included in the cryptographic hash computation, the process for creating a canonical representation of these fields, and how to hash the resulting byte sequence. The resulting hash value, referred to as a "thumbprint," can be used to identify or select the corresponding key.¶
Status of This Memo
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 10 March 2025.¶
Copyright Notice
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
1. Introduction
This specification defines a method for applying a cryptographic hash function to a CBOR Object Signing and Encryption (COSE) Key structure [RFC9052], resulting in a hash value known as a "thumbprint." To achieve this, the document specifies which fields in the COSE Key structure are included in the hash computation, the process for creating a canonical form of these fields, and how to hash the resulting byte sequence. One of the primary use cases for this thumbprint is as a naming scheme for identifying or selecting the key, such as by using the COSE Key Thumbprint value as a "kid" (key ID). Another key use case involves key derivation functions that use the thumbprints of public keys from the endpoints, along with other context, to derive a symmetric key.¶
This specification outlines how thumbprints of COSE Keys are generated for both asymmetric and symmetric keys (see Section 3 and Section 4). Additionally, it introduces a new CBOR Web Token (CWT) confirmation method, which is added to the IANA "CWT Confirmation Methods" registry established by [RFC8747]. For further details on the use of a confirmation claim in a CWT with a proof-of-possession key, refer to Section 3.1 of [RFC8747].¶
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
3. COSE Key Thumbprint
The thumbprint of a COSE Key MUST be computed as follows:¶
-
Construct a COSE_Key structure (see Section 7 of [RFC9052]) containing only the required parameters representing the key as described in Section 4 of this document.¶
-
Apply the deterministic encoding described in Section 4.2.1 of [RFC8949] to the representation constructed in step (1).¶
-
Hash the bytes produced in step (2) with a cryptographic hash function H. For example, SHA-256 [RFC6234] may be used as a hash function.¶
The details of this computation are further described in subsequent sections.¶
The SHA-256 hash algorithm MUST be supported, other algorithms MAY be supported.¶
4. Required COSE Key Parameters
Only the required parameters of a key's representation are used when computing its COSE Key Thumbprint value. This section summarizes the required parameters.¶
The "kty" (label: 1) element MUST be present for all key types, and the integer value specified in the IANA COSE Key Types registry MUST be used. The tstr data type is not used with the kty element.¶
Many COSE Key parameters are specific to the chosen key type. The following subsections list the required parameters for commonly used key types.¶
4.1. Octet Key Pair (OKP)
The required parameters for elliptic curve public keys that use the OKP key type, such as X25519, are:¶
4.2. Elliptic Curve Keys with X- and Y-Coordinate Pair
The required parameters for elliptic curve public keys that use the EC2 key type, such as NIST P-256, are:¶
-
"kty" (label: 1, data type: int, value: 2)¶
-
"crv" (label: -1, data type: int)¶
-
"x" (label: -2, data type: bstr)¶
-
"y" (label: -3, data type: bstr)¶
Details can be found in Section 7.1 of [RFC9053].¶
Note: [RFC9052] supports both compressed and uncompressed point representations. For interoperability, implementations adhering to this specification MUST use the uncompressed point representation. Therefore, the y-coordinate is expressed as a bstr. If an implementation uses the compressed point representation, it MUST first convert it to the uncompressed form for the purpose of thumbprint calculation.¶
4.3. RSA Public Keys
The required parameters for an RSA public key are:¶
4.4. Symmetric Keys
The required parameters for a symmetric key are:¶
5. Miscellaneous Considerations
5.1. Why Not Include Optional COSE Key Parameters?
Optional parameters of COSE Keys are intentionally not included in the COSE Key Thumbprint computation so that their absence or presence in the COSE Key does not alter the resulting value. The COSE Key Thumbprint is a digest of the essential parameters required to represent the key as a COSE Key, rather than any additional data that might accompany the key.¶
By excluding optional parameters, the COSE Key Thumbprint consistently refers to the key itself, not to a key with additional attributes. Different application contexts may include various optional attributes in the COSE Key structure. If these optional parameters were included in the thumbprint calculation, the resulting values could differ for the same key depending on the attributes present. Including only the required parameters ensures that the COSE Key Thumbprint remains consistent for a given key, regardless of any additional attributes.¶
Different kinds of thumbprints could be defined by other specifications that might include some or all additional COSE Key parameters, if use cases arise where such different kinds of thumbprints would be useful.¶
5.2. Selection of Hash Function
A specific hash function must be chosen by an application to compute the hash value of the hash input. For instance, SHA-256 [RFC6234] may be used as the hash function. While SHA-256 is a good default choice at the time of writing, the preferred hash function may evolve as the cryptographic landscape develops.¶
In many cases, only the party that generates the key needs to be aware of the hash function used. For example, the key producer might use the thumbprint value as a "kid" (key ID). In such scenarios, the consumer of the "kid" treats it as an opaque value solely for key selection.¶
However, when multiple parties are involved in reproducing and comparing the COSE Key Thumbprint, it is crucial that they know and use the same hash function to ensure consistent results.¶
5.3. Thumbprints of Keys Not in COSE Key Format
Keys that are in other formats can be represented as COSE Keys. Any party in possession of a key that is represented as a COSE Key can use the COSE Key Thumbprint.¶
5.4. Relationship to Digests of X.509 Values
COSE Key Thumbprint values are computed on the COSE Key object required to represent a key, rather than all parameters of a COSE Key that the key is represented in. Thus, they are more analogous to applications that use digests of X.509 Subject Public Key Info (SPKI) values, which are defined in Section 4.1.2.7 of [RFC5280], than to applications that use digests of complete certificate values, as the "x5t" (X.509 certificate SHA-1 thumbprint) [RFC9360] value defined for X.509 certificate objects does. While logically equivalent to a digest of the SPKI representation of the key, a COSE Key Thumbprint is computed over the CBOR representation of that key, rather than over an ASN.1 representation of it.¶
5.5. Confirmation Method
[RFC8747] introduced confirmation methods for use with CBOR Web Tokens (CWTs) with the addition of the "cnf" claim. CWTs have been defined in [RFC8392]. This specification adds a new confirmation method based on COSE Key Thumbprints.¶
The proof-of-possession key is identified using the "ckt" claim, the COSE Key Thumbprint claim. This claim contains the value of the COSE Key Thumbprint encoded as a binary string. Instead of communicating the actual COSE Key only the thumbprint is conveyed. This approach assumes that the recipient is able to obtain the identified COSE Key using the thumbprint contained in the "ckt" claim. In this approach, the issuer of a CWT declares that the presenter possesses a particular key and that the recipient can cryptographically confirm the presenter's proof of possession of the key by including a "ckt" claim in the CWT.¶
The following example demonstrates the use of the "ckt" claim in a CWT as part of the confirmation method (with line-breaks inserted for editorial reasons):¶
{ /iss/ 1 : "coaps://as.example.com", /aud/ 3 : "coaps://resource.example.org", /exp/ 4 : 1361398824, /cnf/ 8 : { /ckt/ [[TBD1]] : h'496bd8afadf307e5b08c64b0421bf9dc 01528a344a43bda88fadd1669da253ec' } }¶
Section 8 registers the "ckt" claim and the confirmation method. The "ckt" claim is expected to be used in the "cnf" claim.¶
5.6. COSE Key Thumbprint URIs
This specification defines Uniform Resource Identifiers (URIs) to represent a COSE Key Thumbprint value. The design follows the work of the JSON Web Key (JWK) Thumbprint URIs, specified in [RFC9278]. This enables COSE Key Thumbprints to be used, for example, as key identifiers in contexts requiring URIs. This specification defines a URI prefix indicating that the portion of the URI following the prefix is a COSE Key Thumbprint.¶
The following URI prefix is defined to indicate that the portion of the URI following the prefix is a COSE Key Thumbprint:¶
urn:ietf:params:oauth:ckt¶
To make the hash algorithm being used explicit in a URI, the prefix is followed by a hash algorithm identifier and a COSE Key Thumbprint value, each separated by a colon character to form a URI representing a COSE Key Thumbprint.¶
Hash algorithm identifiers used in COSE Key Thumbprint URIs MUST be values from the "Hash Name String" column in the IANA "Named Information Hash Algorithm Registry" [IANA.Hash.Algorithms]. COSE Key Thumbprint URIs with hash algorithm identifiers not found in this registry are not considered valid and applications MUST detect and handle this error, should it occur.¶
Since the URN is encoded as a string, the output of the COSE Key Thumbprint computation described in Section 3 MUST be base64url encoded without padding.¶
[RFC7515] specifies Base64url encoding as follows:¶
"Base64 encoding using the URL- and filename-safe character set defined in Section 5 of RFC 4648 [RFC4648], with all trailing '=' characters omitted and without the inclusion of any line breaks, whitespace, or other additional characters. Note that the base64url encoding of the empty octet sequence is the empty string. (See Appendix C of [RFC7515] for notes on implementing base64url encoding without padding.)"¶
The base64url encoding of the thumbprint shown in Section 6 is shown below (with a line-break added for readability purposes).¶
SWvYr63zB-WwjGSwQhv53AFSijRKQ72oj63RZp2iU-w¶
The full example of a COSE Key Thumbprint URI is shown below, again with a line-break added.¶
urn:ietf:params:oauth:ckt:sha-256: SWvYr63zB-WwjGSwQhv53AFSijRKQ72oj63RZp2iU-w¶
6. Example
This section demonstrates the COSE Key Thumbprint computation for the following example COSE Key containing an ECC public key.¶
For better readability, the example is first presented in CBOR diagnostic format (with the long line broken for display purposes only).¶
{ / kty set to EC2 = Elliptic Curve Keys / 1:2, / crv set to P-256 / -1:1, / public key: x-coordinate / -2:h'65eda5a12577c2bae829437fe338701a10aaa375e1bb5b5de108de439c0 8551d', / public key: y-coordinate / -3:h'1e52ed75701163f7f9e40ddf9f341b3dc9ba860af7e0ca7ca7e9eecd008 4d19c', / kid is bstr, not used in COSE Key Thumbprint / 2:h'1decade2facade3' }¶
The example above corresponds to the following CBOR encoding (with link breaks added for display purposes only):¶
A50102200121582065EDA5A12577C2BAE829437FE338701A10AAA375E1BB5B5DE108D E439C08551D2258201E52ED75701163F7F9E40DDF9F341B3DC9BA860AF7E0CA7CA7E9 EECD0084D19C0258246D65726961646F632E6272616E64796275636B406275636B6C6 16E642E6578616D706C65¶
Not all of the parameters from the example above are used in the COSE Key Thumbprint computation since the required parameters of an elliptic curve public key are (as listed in Section 4.2) "kty", "crv", "x", and "y".¶
The resulting COSE Key structure, in CBOR diagnostic format with line-breaks added for better readability, with the minimum parameters in the correct order are.¶
{ 1:2, -1:1, -2:h'65eda5a12577c2bae829437fe338701a 10aaa375e1bb5b5de108de439c08551d', -3:h'1e52ed75701163f7f9e40ddf9f341b3d c9ba860af7e0ca7ca7e9eecd0084d19c' }¶
In CBOR encoding the result is (with line-breaks added for display purposes only):¶
A40102200121582065EDA5A12577C2BAE829437FE338701A10AAA375E1BB5B5DE 108DE439C08551D2258201E52ED75701163F7F9E40DDF9F341B3DC9BA860AF7E0 CA7CA7E9EECD0084D19C¶
Using SHA-256, the resulting thumbprint is:¶
496bd8afadf307e5b08c64b0421bf9dc01528a344a43bda88fadd1669da253ec¶
7. Security Considerations
A COSE Key Thumbprint will only uniquely identify a particular key if a single unambiguous COSE Key representation for that key is defined and used when computing the COSE Key Thumbprint.¶
A COSE Key Thumbprint will only uniquely identify a particular key if a single unambiguous COSE Key representation for that key is defined and used when computing the COSE Key Thumbprint. Key identifiers are not included in the thumbprint calculation (similarly to other optional parameters in the COSE_Key structure). If the inclusion of specific optional parameters in the thumbprint calculation is important for a particular application, this specification would not be suitable.¶
While thumbprint values are useful for identifying legitimate keys, comparing thumbprint values is not a reliable means of excluding the use of particular keys (or transformations thereof). The reason is that an attacker may supply a key that is a transformation of a key in order to have it appear to be a different key. For instance, if a legitimate RSA key uses a modulus value N and an attacker supplies a key with modulus 3*N, the modified key would still work about 1/3 of the time, but would appear to be a different key.¶
Producing thumbprints of symmetric keys needs to be done with care. Developers MUST ensure that the symmetric key has sufficient entropy to prevent attackers to precompute tables of symmetric keys with their corresponding hash values. This can be prevented if the symmetric key is a randomly selected key of at least 128 bit length. Thumbprints MUST NOT be used with passwords or other low-entropy secrets. If a developer is unable to determine whether all symmetric keys used in an application have sufficient entropy, then thumbprints of symmetric keys MUST NOT be used. In general, using thumbprints of symmetric keys should only be used in special applications. In most other deployment scenarios it is more appropriate to utilize a different naming scheme for key identifiers.¶
8. IANA Considerations
IANA is requested to add the following entry to the IANA "CWT Confirmation Methods" registry established by [RFC8747]:¶
-
Confirmation Method Name: ckt¶
-
Confirmation Method Description: COSE Key SHA-256 Thumbprint¶
-
JWT Confirmation Method Name: jkt¶
-
Confirmation Key: [[TBD1]]¶
-
Confirmation Value Type(s): binary string¶
-
Change Controller: IETF¶
-
Specification Document(s): [[This document]]¶
Furthermore, IANA is requested to add a value to the IANA "OAuth URI" registry established with [RFC6755]:¶
9. Acknowledgements
We would like to thank the authors of [RFC7638] for their work on the JSON Web Key (JWK) Thumbprint specification. This document applies JWK Thumbprints to COSE Key structures.¶
Additionally, we would like to thank Carsten Bormann, Ilari Liusvaara, Laurence Lundblade, Daisuke Ajitomi, Michael Richardson, Michael B. Jones, Mallory Knodel, Joel Jaeggli, Derrell Piper, Patrik Fältström, Warren Kumari, Deb Cooley and Brendan Moran for their feedback.¶
10. References
10.1. Normative References
- [RFC2119]
- Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/rfc/rfc2119>.
- [RFC4648]
- Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, DOI 10.17487/RFC4648, , <https://www.rfc-editor.org/rfc/rfc4648>.
- [RFC6755]
- Campbell, B. and H. Tschofenig, "An IETF URN Sub-Namespace for OAuth", RFC 6755, DOI 10.17487/RFC6755, , <https://www.rfc-editor.org/rfc/rfc6755>.
- [RFC7515]
- Jones, M., Bradley, J., and N. Sakimura, "JSON Web Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, , <https://www.rfc-editor.org/rfc/rfc7515>.
- [RFC8174]
- Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/rfc/rfc8174>.
- [RFC8392]
- Jones, M., Wahlstroem, E., Erdtman, S., and H. Tschofenig, "CBOR Web Token (CWT)", RFC 8392, DOI 10.17487/RFC8392, , <https://www.rfc-editor.org/rfc/rfc8392>.
- [RFC8747]
- Jones, M., Seitz, L., Selander, G., Erdtman, S., and H. Tschofenig, "Proof-of-Possession Key Semantics for CBOR Web Tokens (CWTs)", RFC 8747, DOI 10.17487/RFC8747, , <https://www.rfc-editor.org/rfc/rfc8747>.
- [RFC8949]
- Bormann, C. and P. Hoffman, "Concise Binary Object Representation (CBOR)", STD 94, RFC 8949, DOI 10.17487/RFC8949, , <https://www.rfc-editor.org/rfc/rfc8949>.
- [RFC9052]
- Schaad, J., "CBOR Object Signing and Encryption (COSE): Structures and Process", STD 96, RFC 9052, DOI 10.17487/RFC9052, , <https://www.rfc-editor.org/rfc/rfc9052>.
- [RFC9053]
- Schaad, J., "CBOR Object Signing and Encryption (COSE): Initial Algorithms", RFC 9053, DOI 10.17487/RFC9053, , <https://www.rfc-editor.org/rfc/rfc9053>.
10.2. Informative References
- [IANA.Hash.Algorithms]
- "Named Information Hash Algorithm Registry", <https://www.iana.org/assignments/named-information>.
- [RFC5280]
- Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, , <https://www.rfc-editor.org/rfc/rfc5280>.
- [RFC6234]
- Eastlake 3rd, D. and T. Hansen, "US Secure Hash Algorithms (SHA and SHA-based HMAC and HKDF)", RFC 6234, DOI 10.17487/RFC6234, , <https://www.rfc-editor.org/rfc/rfc6234>.
- [RFC7638]
- Jones, M. and N. Sakimura, "JSON Web Key (JWK) Thumbprint", RFC 7638, DOI 10.17487/RFC7638, , <https://www.rfc-editor.org/rfc/rfc7638>.
- [RFC9278]
- Jones, M. and K. Yasuda, "JWK Thumbprint URI", RFC 9278, DOI 10.17487/RFC9278, , <https://www.rfc-editor.org/rfc/rfc9278>.
- [RFC9360]
- Schaad, J., "CBOR Object Signing and Encryption (COSE): Header Parameters for Carrying and Referencing X.509 Certificates", RFC 9360, DOI 10.17487/RFC9360, , <https://www.rfc-editor.org/rfc/rfc9360>.