Network Working Group G. Zorn
Internet-Draft Network Zen
Intended status: Standards Track S. Comerica
Expires: May 13, 2010 Cisco Systems
November 9, 2009
Diameter Base Protocol MIB
draft-ietf-dime-diameter-base-protocol-mib-03.txt
Abstract
Along with providing support for certain basic authentication,
authorization and accounting functions, the Diameter protocol is
designed to provide a framework for AAA applications.
This document defines the Management Information Base (MIB) module
which describes the minimum set of objects needed to manage an
implementation of the Diameter protocol.
Status of this Memo
This Internet-Draft is submitted to IETF in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on May 13, 2010.
Copyright Notice
Copyright (c) 2009 IETF Trust and the persons identified as the
document authors. All rights reserved.
Zorn & Comerica Expires May 13, 2010 [Page 1]
Internet-Draft Diameter Base Protocol MIB November 2009
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the BSD License.
This document may contain material from IETF Documents or IETF
Contributions published or made publicly available before November
10, 2008. The person(s) controlling the copyright in some of this
material may not have granted the IETF Trust the right to allow
modifications of such material outside the IETF Standards Process.
Without obtaining an adequate license from the person(s) controlling
the copyright in such materials, this document may not be modified
outside the IETF Standards Process, and derivative works of it may
not be created outside the IETF Standards Process, except to format
it for publication as an RFC or to translate it into languages other
than English.
Zorn & Comerica Expires May 13, 2010 [Page 2]
Internet-Draft Diameter Base Protocol MIB November 2009
Table of Contents
1. The Internet-Standard Management Framework . . . . . . . . . . 3
2. Requirements Language . . . . . . . . . . . . . . . . . . . . 3
3. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4. Diameter Base Protocol MIB Definitions . . . . . . . . . . . . 3
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 47
6. Security Considerations . . . . . . . . . . . . . . . . . . . 47
7. Contributors . . . . . . . . . . . . . . . . . . . . . . . . . 48
8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 48
9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 48
9.1. Normative References . . . . . . . . . . . . . . . . . . . 48
9.2. Informative References . . . . . . . . . . . . . . . . . . 49
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 49
Zorn & Comerica Expires May 13, 2010 [Page 3]
Internet-Draft Diameter Base Protocol MIB November 2009
1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58
([RFC2578], [RFC2579], [RFC2580]). In particular, it describes
managed objects used for managing the base Diameter protocol
[RFC3588].
2. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
3. Overview
This MIB defines objects supporting the management of the Diameter
base protocol as defined in RFC 3588 [RFC3588]. Objects related to
Diameter applications are defined in separate documents.
4. Diameter Base Protocol MIB Definitions
DIAMETER-BASE-PROTOCOL-MIB DEFINITIONS ::= BEGIN
IMPORTS
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB -- [RFC4001]
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Counter32,
Unsigned32,
Gauge32,
TimeTicks,
mib-2
FROM SNMPv2-SMI -- [RFC2578]
Zorn & Comerica Expires May 13, 2010 [Page 4]
Internet-Draft Diameter Base Protocol MIB November 2009
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
NOTIFICATION-GROUP,
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF -- [RFC2580]
RowStatus,
TruthValue,
StorageType
FROM SNMPv2-TC; -- [RFC2579]
diameterBaseProtocolMIB MODULE-IDENTITY
LAST-UPDATED "200802100000Z" -- 10 February 2008
ORGANIZATION "IETF dime Working Group."
CONTACT-INFO
"Glen Zorn
Network Zen
1310 East Thomas Street
Seattle, WA 98102
USA
Email: gwz@net-zen.net"
DESCRIPTION
"The MIB module for entities implementing the
Diameter Base Protocol.
Copyright (C) The IETF Trust (2008). This initial
version of this MIB module was published in RFC yyyy;
for full legal notices see the RFC itself. Supplementary
information may be available on
http://www.ietf.org/copyrights/ianamib.html."
-- RFC Ed.: replace yyyy with actual RFC number and remove this note
REVISION "200802100000Z" -- 10 February 2008
DESCRIPTION "Initial version as published in RFC yyyy"
-- RFC Ed.: replace yyyy with actual RFC number and remove this note
::= { mib-2 119 } -- Experimental value assigned by IANA.
-- Top-Level Components of this MIB.
diameterBaseNotifications OBJECT IDENTIFIER ::=
{ diameterBaseProtocolMIB 0 }
diameterBaseObjects OBJECT IDENTIFIER ::=
{ diameterBaseProtocolMIB 1 }
diameterBaseConform OBJECT IDENTIFIER ::=
{ diameterBaseProtocolMIB 2 }
dbpLocalCfgs OBJECT IDENTIFIER ::= { diameterBaseObjects 1 }
Zorn & Comerica Expires May 13, 2010 [Page 5]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpLocalStats OBJECT IDENTIFIER ::= { diameterBaseObjects 2 }
dbpPeerCfgs OBJECT IDENTIFIER ::= { diameterBaseObjects 3 }
dbpPeerStats OBJECT IDENTIFIER ::= { diameterBaseObjects 4 }
dbpRealmCfgs OBJECT IDENTIFIER ::= { diameterBaseObjects 5 }
dbpRealmStats OBJECT IDENTIFIER ::= { diameterBaseObjects 6 }
dbpNotifCfgs OBJECT IDENTIFIER ::= { diameterBaseObjects 7 }
-- Protocol Error Notifications
dbpProtocolErrorNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to True(1)
enables the dbpProtocolErrorNotif notification."
DEFVAL {false}
::= { dbpNotifCfgs 1 }
dbpProtocolErrorNotif NOTIFICATION-TYPE
OBJECTS {
dbpPeerId,
dbpPerPeerStatsProtocolErrors
}
STATUS current
DESCRIPTION
"An dbpProtocolError Notification is sent when both the
following conditions are true:
1) the value of dbpProtocolErrorNotifEnabled is True(1)
2) the value of dbpPerPeerStatsProtocolErrors changes
It can be utilized by an NMS to trigger
logical/physical entity table maintenance polls.
An agent must not generate more than one
dbpProtocolError 'notification event' in a five second
period, where a 'notification event' is the
transmission of a single Notification PDU to a list of
Notification destinations.
If additional protocol errors occur within the
five second 'throttling' period, then these
notification events should be suppressed by the agent.
An NMS should periodically check the value of
dbpPerPeerStatsProtocolErrors to detect any missed
dbpProtocolError notification events, e.g. due to
throttling or transmission loss."
::= { diameterBaseNotifications 1 }
-- Transient Error Notifications
Zorn & Comerica Expires May 13, 2010 [Page 6]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpTransientFailureNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to True(1)
enables the dbpTransientFailure Notification."
::= { dbpNotifCfgs 2 }
dbpTransientFailureNotif NOTIFICATION-TYPE
OBJECTS {
dbpPeerId,
dbpPerPeerStatsTransientFailures
}
STATUS current
DESCRIPTION
"An dbpTransientFailure Notification is sent when both
the following conditions are true:
1) the value of dbpTransientFailureNotifEnabled
is True(1)
2) the value of dbpPerPeerStatsTransientFailures
changes
It can be utilized by an NMS to trigger
logical/physical entity table maintenance polls.
An agent must not generate more than one
dbpTransientFailure 'notification event' in a five
second period, where a 'notification event' is the
transmission of a single notification PDU to a list
of notification destinations.
If additional transient failures occur
within the five second 'throttling' period, then
these notification events should be suppressed
by the agent.
An NMS should periodically check the value of
dbpPerPeerStatsTransientFailures to detect any
missed dbpTransientFailure notification events,
e.g. due to throttling or transmission loss."
::= { diameterBaseNotifications 2 }
-- Permanent Failure Notifications
dbpPermanentFailureNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to True(1)
Zorn & Comerica Expires May 13, 2010 [Page 7]
Internet-Draft Diameter Base Protocol MIB November 2009
enables the dbpPermanentFailure notification."
DEFVAL { false }
::= { dbpNotifCfgs 3 }
dbpPermanentFailureNotif NOTIFICATION-TYPE
OBJECTS {
dbpPeerId,
dbpPerPeerStatsPermanentFailures
}
STATUS current
DESCRIPTION
"An dbpPermanentFailure notification is sent when
both the following conditions are true:
1) the value of dbpPermanentFailureNotifEnabled
is True(1)
2) the value of dbpPerPeerStatsPermanentFailures
changes
It can be utilized by an NMS to trigger
logical/physical entity table maintenance polls.
An agent must not generate more than one
dbpPermanentFailure 'notification event' in a five
second period, where a 'notification event' is the
transmission of a single notification PDU to a list
of notification destinations.
If additional permanent failures occur within the
five second 'throttling' period, then these
trap-events should be suppressed by the agent.
An NMS should periodically check the value of
dbpPerPeerStatsPermanentFailures to detect
any missed dbpPermanentFailure trap-events,
e.g. due to throttling or transmission loss."
::= { diameterBaseNotifications 3 }
-- Connection Down Notifs
dbpPeerConnectionDownNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to True(1)
enables the dbpPeerConnectionDown notification."
DEFVAL { false }
::= { dbpNotifCfgs 4 }
dbpPeerConnectionDownNotif NOTIFICATION-TYPE
OBJECTS {
dbpLocalId,
Zorn & Comerica Expires May 13, 2010 [Page 8]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpPeerId
}
STATUS current
DESCRIPTION
"An dbpPeerConnectionDown notification is sent when
both the following conditions are true:
1) the value of dbpPeerConnectionDownNotifEnabled is
True(1)
2) dbpPerPeerStatsState changes to closed(1)
It can be utilized by an NMS to trigger
logical/physical
entity table maintenance polls. An agent must not
generate more than one dbpPeerConnectionDown
'notification event' in a five second period, where a
'notification event' is the transmission of a single
notification PDU to a list of notification
destinations.
If additional 'transport down' events occur within the
five second 'throttling' period, then these trap-events
should be suppressed by the agent."
::= { diameterBaseNotifications 4 }
-- Connection Up Notifications
dbpPeerConnectionUpNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to True(1)
enables the dbpPeerConnectionUp notification."
DEFVAL { false }
::= { dbpNotifCfgs 5 }
dbpPeerConnectionUpNotif NOTIFICATION-TYPE
OBJECTS {
dbpLocalId,
dbpPeerId
}
STATUS current
DESCRIPTION
"An dbpPeerConnectionUp notification is sent
when both thefollowing conditions are true:
1) the value of dbpPeerConnectionUpNotifEnabled is
Zorn & Comerica Expires May 13, 2010 [Page 9]
Internet-Draft Diameter Base Protocol MIB November 2009
True(1)
2) the value of dbpPerPeerStatsState changes to
either rOpen(6)or iOpen(7)
It can be utilized by an NMS to trigger
logical/physical entity table maintenance polls.
An agent must not generate
more than one dbpPeerConnectionUp
'notification event' in a
five second period, where a 'notification event' is the
transmission of a single notification PDU to a
list of notification destinations.
If additional 'connection up' events
occur within the five second 'throttling' period,
then these trap-events should be suppressed by the
agent."
::= { diameterBaseNotifications 5 }
-- Local Configs
dbpLocalId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The implementation-specific identification
string for the Diameter software in use on
the system; for example: 'diameterd'"
::= { dbpLocalCfgs 1 }
dbpLocalIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpLocalIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter
local host's IP Addresses."
::= { dbpLocalCfgs 2 }
dbpLocalIpAddrEntry OBJECT-TYPE
SYNTAX DbpLocalIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a Diameter
local host IP Address."
INDEX { dbpLocalIpAddrIndex }
::= { dbpLocalIpAddrTable 1 }
Zorn & Comerica Expires May 13, 2010 [Page 10]
Internet-Draft Diameter Base Protocol MIB November 2009
DbpLocalIpAddrEntry ::= SEQUENCE {
dbpLocalIpAddrIndex Unsigned32,
dbpLocalIpAddrType InetAddressType,
dbpLocalIpAddress InetAddress
}
dbpLocalIpAddrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying an IP Address
supported by this Diameter host."
::= { dbpLocalIpAddrEntry 1 }
dbpLocalIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of internet address stored
in dbpLocalIpAddress."
::= { dbpLocalIpAddrEntry 2 }
dbpLocalIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP-Address of the host, which is of the type
specified in dbpLocalIpAddrType."
::= { dbpLocalIpAddrEntry 3 }
dbpLocalTcpListenPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Diameter TCP 'listen' port."
::= { dbpLocalCfgs 3 }
dbpLocalSctpListenPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Diameter SCTP 'listen' port."
::= { dbpLocalCfgs 4 }
Zorn & Comerica Expires May 13, 2010 [Page 11]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpLocalOriginHost OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object represents the Local Origin Host."
DEFVAL { "" }
::= { dbpLocalCfgs 5 }
dbpLocalRealm OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object represents the Local Realm Name."
DEFVAL { "" }
::= { dbpLocalCfgs 6 }
dbpLocalStatsTotalMessagesIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Diameter Base Protocol
messages received."
::= { dbpLocalStats 1 }
dbpLocalStatsTotalMessagesOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Diameter Base Protocol
messages transmitted."
::= { dbpLocalStats 2 }
dbpLocalStatsTotalUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total time this Diameter
server has been up until now."
::= { dbpLocalStats 3 }
dbpLocalResetTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Zorn & Comerica Expires May 13, 2010 [Page 12]
Internet-Draft Diameter Base Protocol MIB November 2009
"If the server keeps persistent state (e.g., a process)
and supports a 'reset' operation (e.g., can be told to
re-read configuration files), this value will be the
time elapsed (in hundredths of a second) since the
server was 'reset'. For software that does not
have persistence or does not support a 'reset'
operation, this value will be zero."
::= { dbpLocalStats 4 }
dbpLocalConfigReset OBJECT-TYPE
SYNTAX INTEGER { other(1),
initializing(2),
running(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status/action object to reinitialize any persistent
server state. When set to reset(2), any persistent
server state (such as a process) is reinitialized as
if the server had just been started. This value will
never be returned by a read operation. When read,
one of the following values will be returned:
other(1) - server in some unknown state;
initializing(2) - server (re)initializing;
running(3) - server currently running."
DEFVAL { other }
::= { dbpLocalStats 5 }
dbpLocalApplTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpLocalApplEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter applications
supported by this server."
::= { dbpLocalCfgs 7 }
dbpLocalApplEntry OBJECT-TYPE
SYNTAX DbpLocalApplEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a Diameter
application on this server."
INDEX { dbpLocalApplIndex }
::= { dbpLocalApplTable 1 }
DbpLocalApplEntry ::= SEQUENCE {
Zorn & Comerica Expires May 13, 2010 [Page 13]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpLocalApplIndex Unsigned32,
dbpLocalApplStorageType StorageType,
dbpLocalApplRowStatus RowStatus
}
dbpLocalApplIndex OBJECT-TYPE
SYNTAX Unsigned32 ( 1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying a
supported Diameter application. Upon reload,
dbpLocalApplIndex values may be changed."
::= { dbpLocalApplEntry 1 }
dbpLocalApplStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. None of
the columnar objects is writable when the conceptual
row is permanent."
REFERENCE "Textual Conventions for SMIv2, Section 2."
DEFVAL { nonVolatile }
::= { dbpLocalApplEntry 2 }
dbpLocalApplRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the dbpLocalApplRowStatus
column is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding dbpLocalApplIndex
has been set.
dbpLocalApplIndex may not be modified while
the value of this object is active(1): An attempt
Zorn & Comerica Expires May 13, 2010 [Page 14]
Internet-Draft Diameter Base Protocol MIB November 2009
to set these objects while the value of
dbpLocalApplRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with dbpLocalApplRowStatus equal
to active(1) remain in the table until destroyed.
Entries in this table with dbpLocalApplRowStatus equal
to values other than active(1) will be destroyed after
timeout (5 minutes)."
::= { dbpLocalApplEntry 3 }
dbpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing information regarding
the discovered or configured Diameter
peer servers."
::= { dbpPeerCfgs 1 }
dbpPeerEntry OBJECT-TYPE
SYNTAX DbpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a discovered
or configured Diameter peer server."
INDEX { dbpPeerIndex }
::= { dbpPeerTable 1 }
DbpPeerEntry ::= SEQUENCE {
dbpPeerIndex Unsigned32,
dbpPeerId SnmpAdminString,
dbpPeerPortConnect Unsigned32,
dbpPeerPortListen Unsigned32,
dbpPeerProtocol INTEGER,
dbpPeerSecurity INTEGER,
dbpPeerFirmwareRevision Unsigned32,
dbpPeerStorageType StorageType,
dbpPeerRowStatus RowStatus }
dbpPeerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Zorn & Comerica Expires May 13, 2010 [Page 15]
Internet-Draft Diameter Base Protocol MIB November 2009
"A number uniquely identifying each Diameter peer
with which the host server communicates.
Upon reload, dbpPeerIndex values may be changed."
::= { dbpPeerEntry 1 }
dbpPeerId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The server identifier for the Diameter peer.
It must be unique and non-empty."
::= { dbpPeerEntry 2 }
dbpPeerPortConnect OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connection port this server used
to connect to the Diameter peer.
If there is no active connection, this
value will be zero(0)."
::= { dbpPeerEntry 3 }
dbpPeerPortListen OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port the server is listening on."
::= { dbpPeerEntry 4 }
dbpPeerProtocol OBJECT-TYPE
SYNTAX INTEGER { tcp(1),
sctp(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport protocol (tcp/sctp) the
Diameter peer is using."
::= { dbpPeerEntry 5 }
dbpPeerSecurity OBJECT-TYPE
SYNTAX INTEGER { other(1),
tls(2),
ipsec(3) }
MAX-ACCESS read-only
Zorn & Comerica Expires May 13, 2010 [Page 16]
Internet-Draft Diameter Base Protocol MIB November 2009
STATUS current
DESCRIPTION
"The security the Diameter peer is using.
other(1) - Unknown Security Protocol
tls(2) - Transport Layer Security Protocol
ipsec(3) - Internet Protocol Security"
DEFVAL { other }
::= { dbpPeerEntry 6 }
dbpPeerFirmwareRevision OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Firmware revision of peer. If no firmware
revision, the revision of the Diameter software
module may be reported instead."
::= { dbpPeerEntry 7 }
dbpPeerStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Only the dbpPeerPortListen object is writable when
the conceptual row is permanent."
REFERENCE "Textual Conventions for SMIv2, Section 2."
DEFVAL { nonVolatile }
::= { dbpPeerEntry 8 }
dbpPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the peer entry: creating the entry
enables the peer, destroying the entry disables
the peer."
::= {dbpPeerEntry 9 }
dbpPeerIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpPeerIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter
Zorn & Comerica Expires May 13, 2010 [Page 17]
Internet-Draft Diameter Base Protocol MIB November 2009
peer IP addresses."
::= { dbpPeerCfgs 2 }
dbpPeerIpAddrEntry OBJECT-TYPE
SYNTAX DbpPeerIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a
peer Diameter server."
INDEX {
dbpPeerIndex,
dbpPeerIpAddressIndex }
::= { dbpPeerIpAddrTable 1 }
DbpPeerIpAddrEntry ::= SEQUENCE {
dbpPeerIpAddressIndex Unsigned32,
dbpPeerIpAddressType InetAddressType,
dbpPeerIpAddress InetAddress }
dbpPeerIpAddressIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying an IP Address
supported by this Diameter peer."
::= { dbpPeerIpAddrEntry 1 }
dbpPeerIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address stored in dbpPeerIpAddress."
::= {dbpPeerIpAddrEntry 2}
dbpPeerIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active IP Address(es) used for connections."
::= {dbpPeerIpAddrEntry 3}
dbpAppAdvToPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpAppAdvToPeerEntry
MAX-ACCESS not-accessible
Zorn & Comerica Expires May 13, 2010 [Page 18]
Internet-Draft Diameter Base Protocol MIB November 2009
STATUS current
DESCRIPTION
"The table listing the applications advertised by
this host to each peer and the types of service
supported: accounting, authentication or both."
::= { dbpLocalCfgs 8 }
dbpAppAdvToPeerEntry OBJECT-TYPE
SYNTAX DbpAppAdvToPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a discovered or
configured Diameter peer server."
INDEX { dbpPeerIndex,
dbpAppAdvToPeerVendorId,
dbpAppAdvToPeerIndex }
::= { dbpAppAdvToPeerTable 1 }
DbpAppAdvToPeerEntry ::= SEQUENCE {
dbpAppAdvToPeerVendorId Unsigned32,
dbpAppAdvToPeerIndex Unsigned32,
dbpAppAdvToPeerServices INTEGER,
dbpAppAdvToPeerStorageType StorageType,
dbpAppAdvToPeerRowStatus RowStatus }
dbpAppAdvToPeerVendorId OBJECT-TYPE
SYNTAX Unsigned32 ( 1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IANA Enterprise Code value assigned to
the vendor of the Diameter device."
::= { dbpAppAdvToPeerEntry 1 }
dbpAppAdvToPeerIndex OBJECT-TYPE
SYNTAX Unsigned32 ( 1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying a Diameter
application advertised as supported by
this host to each peer. Upon reload,
dbpAppAdvToPeerIndex values may be
changed"
::= { dbpAppAdvToPeerEntry 2 }
dbpAppAdvToPeerServices OBJECT-TYPE
Zorn & Comerica Expires May 13, 2010 [Page 19]
Internet-Draft Diameter Base Protocol MIB November 2009
SYNTAX INTEGER { acct(1),
auth(2),
both(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of services supported for each application,
accounting, authentication or both."
::= { dbpAppAdvToPeerEntry 3 }
dbpAppAdvToPeerStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
None of the objects are writable when the
conceptual row is permanent."
REFERENCE "Textual Conventions for SMIv2, Section 2."
DEFVAL { nonVolatile }
::= { dbpAppAdvToPeerEntry 4 }
dbpAppAdvToPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the entry: creating the entry causes the
application to be advertised, destroying the entry
ceases advertisement."
::= { dbpAppAdvToPeerEntry 5 }
-- Applications advertised BY peers
dbpAppAdvFromPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpAppAdvFromPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the applications advertised by
each peer to this host and the types of service
supported: accounting, authentication or both."
::= { dbpPeerCfgs 3 }
dbpAppAdvFromPeerEntry OBJECT-TYPE
SYNTAX DbpAppAdvFromPeerEntry
MAX-ACCESS not-accessible
STATUS current
Zorn & Comerica Expires May 13, 2010 [Page 20]
Internet-Draft Diameter Base Protocol MIB November 2009
DESCRIPTION
"A row entry representing a discovered or
configured Diameter peer server."
INDEX {
dbpPeerIndex,
dbpAppAdvFromPeerVendorId,
dbpAppAdvFromPeerIndex
}
::= { dbpAppAdvFromPeerTable 1 }
DbpAppAdvFromPeerEntry ::= SEQUENCE {
dbpAppAdvFromPeerVendorId Unsigned32,
dbpAppAdvFromPeerIndex Unsigned32,
dbpAppAdvFromPeerType INTEGER
}
dbpAppAdvFromPeerVendorId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IANA Enterprise Code value assigned to
the vendor of the Diameter application."
::= { dbpAppAdvFromPeerEntry 1 }
dbpAppAdvFromPeerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the applications
advertised as supported from each Diameter peer."
::= { dbpAppAdvFromPeerEntry 2 }
dbpAppAdvFromPeerType OBJECT-TYPE
SYNTAX INTEGER {
acct(1),
auth(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of services supported for each application,
accounting, authentication or both.
acct(1) - accounting
auth(2) - authentication
both(3) - both accounting and authentication."
Zorn & Comerica Expires May 13, 2010 [Page 21]
Internet-Draft Diameter Base Protocol MIB November 2009
::= { dbpAppAdvFromPeerEntry 3 }
-- table of vendor-IDs supported by each peer
dbpPeerVendorTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpPeerVendorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Vendor IDs
supported by the peer."
::= { dbpPeerCfgs 4 }
dbpPeerVendorEntry OBJECT-TYPE
SYNTAX DbpPeerVendorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a
Vendor ID supported by the peer."
INDEX {
dbpPeerIndex,
dbpPeerVendorIndex
}
::= { dbpPeerVendorTable 1 }
DbpPeerVendorEntry ::= SEQUENCE {
dbpPeerVendorIndex Unsigned32,
dbpPeerVendorId Unsigned32,
dbpPeerVendorStorageType StorageType,
dbpPeerVendorRowStatus RowStatus
}
dbpPeerVendorIndex OBJECT-TYPE
SYNTAX Unsigned32 ( 1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the Vendor
ID supported by the peer. Upon reload,
dbpPeerVendorIndex values may be changed."
::= { dbpPeerVendorEntry 1 }
dbpPeerVendorId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
Zorn & Comerica Expires May 13, 2010 [Page 22]
Internet-Draft Diameter Base Protocol MIB November 2009
"The active vendor ID used for peer connections."
::= { dbpPeerVendorEntry 2 }
dbpPeerVendorStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
None of the objects are writable when the
conceptual row is permanent."
REFERENCE "Textual Conventions for SMIv2, Section 2."
DEFVAL { nonVolatile }
::= { dbpPeerVendorEntry 3 }
dbpPeerVendorRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the dbpPeerVendorRowStatus
column is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding dbpPeerVendorId has been
set. Also, a newly created row cannot be made active
until the corresponding 'dbpPeerIndex' has been set.
dbpPeerVendorId may not be modified while the
value of this object is active(1):
An attempt to set these objects while the value of
dbpPeerVendorRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with dbpPeerVendorRowStatus equal
to active(1) remain in the table until destroyed.
Entries in this table with dbpPeerVendorRowStatus equal
to values other than active(1) will be destroyed after
Zorn & Comerica Expires May 13, 2010 [Page 23]
Internet-Draft Diameter Base Protocol MIB November 2009
timeout (5 minutes)."
::= { dbpPeerVendorEntry 4 }
dbpPerPeerStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpPerPeerStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter peer statistics."
::= { dbpPeerStats 1 }
dbpPerPeerStatsEntry OBJECT-TYPE
SYNTAX DbpPerPeerStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a Diameter peer."
INDEX { dbpPeerIndex }
::= { dbpPerPeerStatsTable 1 }
DbpPerPeerStatsEntry ::= SEQUENCE {
dbpPerPeerStatsState INTEGER,
dbpPerPeerStatsStateDuration TimeTicks,
dbpPerPeerStatsLastDiscCause INTEGER,
dbpPerPeerStatsWhoInitDisconnect INTEGER,
dbpPerPeerStatsDWCurrentStatus INTEGER,
dbpPerPeerStatsTimeoutConnAtmpts Counter32,
dbpPerPeerStatsASRsIn Counter32,
dbpPerPeerStatsASRsOut Counter32,
dbpPerPeerStatsASAsIn Counter32,
dbpPerPeerStatsASAsOut Counter32,
dbpPerPeerStatsACRsIn Counter32,
dbpPerPeerStatsACRsOut Counter32,
dbpPerPeerStatsACAsIn Counter32,
dbpPerPeerStatsACAsOut Counter32,
dbpPerPeerStatsCERsIn Counter32,
dbpPerPeerStatsCERsOut Counter32,
dbpPerPeerStatsCEAsIn Counter32,
dbpPerPeerStatsCEAsOut Counter32,
dbpPerPeerStatsDWRsIn Counter32,
dbpPerPeerStatsDWRsOut Counter32,
dbpPerPeerStatsDWAsIn Counter32,
dbpPerPeerStatsDWAsOut Counter32,
dbpPerPeerStatsDPRsIn Counter32,
dbpPerPeerStatsDPRsOut Counter32,
dbpPerPeerStatsDPAsIn Counter32,
dbpPerPeerStatsDPAsOut Counter32,
Zorn & Comerica Expires May 13, 2010 [Page 24]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpPerPeerStatsRARsIn Counter32,
dbpPerPeerStatsRARsOut Counter32,
dbpPerPeerStatsRAAsIn Counter32,
dbpPerPeerStatsRAAsOut Counter32,
dbpPerPeerStatsSTRsIn Counter32,
dbpPerPeerStatsSTRsOut Counter32,
dbpPerPeerStatsSTAsIn Counter32,
dbpPerPeerStatsSTAsOut Counter32,
dbpPerPeerStatsDWReqTimer TimeTicks,
dbpPerPeerStatsRedirectEvents Counter32,
dbpPerPeerStatsAccDupRequests Counter32,
dbpPerPeerStatsMalformedReqsts Counter32,
dbpPerPeerStatsAccsNotRecorded Counter32,
dbpPerPeerStatsAccRetrans Counter32,
dbpPerPeerStatsTotalRetrans Counter32,
dbpPerPeerStatsAccPendReqstsOut Gauge32,
dbpPerPeerStatsAccReqstsDropped Counter32,
dbpPerPeerStatsHByHDropMessages Counter32,
dbpPerPeerStatsEToEDupMessages Counter32,
dbpPerPeerStatsUnknownTypes Counter32,
dbpPerPeerStatsProtocolErrors Counter32,
dbpPerPeerStatsTransientFailures Counter32,
dbpPerPeerStatsPermanentFailures Counter32,
dbpPerPeerStatsTransportDown Counter32 }
dbpPerPeerStatsState OBJECT-TYPE
SYNTAX INTEGER { closed(1),
waitConnAck(2),
waitICea(3),
elect(4),
waitReturns(5),
rOpen(6),
iOpen(7),
closing(8) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Connection state in the Peer State Machine of
the peer with which this Diameter server is
communicating.
closed - Connection closed with this peer.
waitConnAck - Waiting for an acknowledgment
from this peer.
waitICea - Waiting for a Capabilities-Exchange-
Answer from this peer.
elect - When the peer and the server are both
trying to bring up a connection with
Zorn & Comerica Expires May 13, 2010 [Page 25]
Internet-Draft Diameter Base Protocol MIB November 2009
each other at the same time. An
election process begins which
determines which socket remains open.
waitReturns - Waiting for election returns.
r-open - Responder transport connection is
used for communication.
i-open - Initiator transport connection is
used for communication.
closing - Actively closing and doing cleanup."
::= { dbpPerPeerStatsEntry 1 }
dbpPerPeerStatsStateDuration OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peer state duration."
::= { dbpPerPeerStatsEntry 2 }
dbpPerPeerStatsLastDiscCause OBJECT-TYPE
SYNTAX INTEGER { rebooting(1),
busy(2),
doNotWantToTalk(3),
election(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last cause for a peer's disconnection.
rebooting - A scheduled reboot is imminent.
busy - The peer's internal resources are
constrained, and it has determined
that the transport connection needs
to be shutdown.
doNotWantToTalk - The peer has determined that
it does not see a need for the
transport connection to exist,
since it does not expect any
messages to be exchanged in
the foreseeable future.
electionLost - The peer has determined that it
has lost the election process
and has therefore disconnected
the transport connection."
::= { dbpPerPeerStatsEntry 3 }
Zorn & Comerica Expires May 13, 2010 [Page 26]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpPerPeerStatsWhoInitDisconnect OBJECT-TYPE
SYNTAX INTEGER { host(1),
peer(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Did the host or peer initiate the disconnect?
host - If this server initiated the disconnect.
peer - If the peer with which this server was
connected initiated the disconnect."
::= { dbpPerPeerStatsEntry 4 }
dbpPerPeerStatsDWCurrentStatus OBJECT-TYPE
SYNTAX INTEGER { okay(1),
suspect(2),
down(3),
reopen(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"okay - Indicates the connection is presumed working.
suspect - Indicates the connection is possibly
congested or down.
down - The peer is no longer reachable, causing
the transport connection to be shutdown.
reopen - Three watchdog messages are exchanged with
accepted round trip times, and the connection
to the peer is considered stabilized."
::= { dbpPerPeerStatsEntry 5 }
dbpPerPeerStatsTimeoutConnAtmpts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If there is no transport connection with a peer,
this is the number of times the server attempts
to connect to that peer. This is reset on
disconnection."
::= { dbpPerPeerStatsEntry 6 }
dbpPerPeerStatsASRsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Request messages
Zorn & Comerica Expires May 13, 2010 [Page 27]
Internet-Draft Diameter Base Protocol MIB November 2009
received from the peer."
::= { dbpPerPeerStatsEntry 7 }
dbpPerPeerStatsASRsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Request
messages sent to the peer."
::= { dbpPerPeerStatsEntry 8 }
dbpPerPeerStatsASAsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Answer
messages received from the peer."
::= { dbpPerPeerStatsEntry 9 }
dbpPerPeerStatsASAsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Answer
messages sent to the peer."
::= { dbpPerPeerStatsEntry 10 }
dbpPerPeerStatsACRsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Request messages
received from the peer."
::= { dbpPerPeerStatsEntry 11 }
dbpPerPeerStatsACRsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Request messages
sent to the peer."
::= { dbpPerPeerStatsEntry 12 }
Zorn & Comerica Expires May 13, 2010 [Page 28]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpPerPeerStatsACAsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Answer messages
received from the peer."
::= { dbpPerPeerStatsEntry 13 }
dbpPerPeerStatsACAsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Answer messages
sent to the peer."
::= { dbpPerPeerStatsEntry 14 }
dbpPerPeerStatsCERsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Capabilities-Exchange-Request
messages received from the peer."
::= { dbpPerPeerStatsEntry 15 }
dbpPerPeerStatsCERsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Capabilities-Exchange-Request
messages sent to the peer."
::= { dbpPerPeerStatsEntry 16 }
dbpPerPeerStatsCEAsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Capabilities-Exchange-Answer
messages received from the peer."
::= { dbpPerPeerStatsEntry 17 }
dbpPerPeerStatsCEAsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
Zorn & Comerica Expires May 13, 2010 [Page 29]
Internet-Draft Diameter Base Protocol MIB November 2009
STATUS current
DESCRIPTION
"Number of Capabilities-Exchange-Answer
messages sent to the peer."
::= { dbpPerPeerStatsEntry 18 }
dbpPerPeerStatsDWRsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Device-Watchdog-Request
messages received from the peer."
::= { dbpPerPeerStatsEntry 19 }
dbpPerPeerStatsDWRsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Device-Watchdog-Request
messages sent to the peer."
::= { dbpPerPeerStatsEntry 20 }
dbpPerPeerStatsDWAsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Device-Watchdog-Answer
messages received from the peer."
::= { dbpPerPeerStatsEntry 21 }
dbpPerPeerStatsDWAsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Device-Watchdog-Answer
messages sent to the peer."
::= { dbpPerPeerStatsEntry 22 }
dbpPerPeerStatsDPRsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Disconnect-Peer-Request messages
Zorn & Comerica Expires May 13, 2010 [Page 30]
Internet-Draft Diameter Base Protocol MIB November 2009
received."
::= { dbpPerPeerStatsEntry 23 }
dbpPerPeerStatsDPRsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Disconnect-Peer-Request messages
sent."
::= { dbpPerPeerStatsEntry 24 }
dbpPerPeerStatsDPAsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Disconnect-Peer-Answer messages
received."
::= { dbpPerPeerStatsEntry 25 }
dbpPerPeerStatsDPAsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Disconnect-Peer-Answer messages
sent."
::= { dbpPerPeerStatsEntry 26 }
dbpPerPeerStatsRARsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Request messages
received."
::= { dbpPerPeerStatsEntry 27 }
dbpPerPeerStatsRARsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Request messages
sent."
::= { dbpPerPeerStatsEntry 28 }
Zorn & Comerica Expires May 13, 2010 [Page 31]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpPerPeerStatsRAAsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Answer messages
received."
::= { dbpPerPeerStatsEntry 29 }
dbpPerPeerStatsRAAsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Answer messages
sent."
::= { dbpPerPeerStatsEntry 30 }
dbpPerPeerStatsSTRsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Request
messages received from the peer."
::= { dbpPerPeerStatsEntry 31 }
dbpPerPeerStatsSTRsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Request
messages sent to the peer."
::= { dbpPerPeerStatsEntry 32 }
dbpPerPeerStatsSTAsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Answer
messages received from the peer."
::= { dbpPerPeerStatsEntry 33 }
dbpPerPeerStatsSTAsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
Zorn & Comerica Expires May 13, 2010 [Page 32]
Internet-Draft Diameter Base Protocol MIB November 2009
STATUS current
DESCRIPTION
"Number of Session-Termination-Answer
messages sent to the peer."
::= { dbpPerPeerStatsEntry 34 }
dbpPerPeerStatsDWReqTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device-Watchdog Request Timer, which
is the interval between packets sent to
peers."
::= { dbpPerPeerStatsEntry 35 }
dbpPerPeerStatsRedirectEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Redirect Event count, which is the number
of redirects sent from a peer."
::= { dbpPerPeerStatsEntry 36 }
dbpPerPeerStatsAccDupRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of duplicate Diameter Accounting-Request
packets received."
::= { dbpPerPeerStatsEntry 37 }
dbpPerPeerStatsMalformedReqsts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed Diameter
packets received."
::= { dbpPerPeerStatsEntry 38 }
dbpPerPeerStatsAccsNotRecorded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Zorn & Comerica Expires May 13, 2010 [Page 33]
Internet-Draft Diameter Base Protocol MIB November 2009
"The number of Diameter Accounting-Request packets
which were received and responded to but not
recorded."
::= { dbpPerPeerStatsEntry 39 }
dbpPerPeerStatsAccRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter Accounting-Request packets
retransmitted to this Diameter server."
::= { dbpPerPeerStatsEntry 40 }
dbpPerPeerStatsTotalRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter packets retransmitted
to this Diameter server, not to include Diameter
Accounting-Request packets retransmitted."
::= { dbpPerPeerStatsEntry 41 }
dbpPerPeerStatsAccPendReqstsOut OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter Accounting-Request packets
sent to this peer that have not yet timed out or
received a response. This variable is incremented when an
Accounting-Request is sent to this server and decremented
due to receipt of an Accounting-Response, a timeout or
a retransmission."
::= { dbpPerPeerStatsEntry 42 }
dbpPerPeerStatsAccReqstsDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Accounting-Requests to this server
that have been dropped."
::= { dbpPerPeerStatsEntry 43 }
dbpPerPeerStatsHByHDropMessages OBJECT-TYPE
SYNTAX Counter32
Zorn & Comerica Expires May 13, 2010 [Page 34]
Internet-Draft Diameter Base Protocol MIB November 2009
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An answer message that is received with an unknown
Hop-by-Hop Identifier. Does not include Accounting
Requests dropped."
::= { dbpPerPeerStatsEntry 44 }
dbpPerPeerStatsEToEDupMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duplicate answer messages that are to be locally
consumed. Does not include duplicate Accounting
Requests received."
::= { dbpPerPeerStatsEntry 45 }
dbpPerPeerStatsUnknownTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter packets of unknown type
which were received."
::= { dbpPerPeerStatsEntry 46 }
dbpPerPeerStatsProtocolErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of protocol errors returned to peer,
but not including redirects."
::= { dbpPerPeerStatsEntry 47 }
dbpPerPeerStatsTransientFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transient Failure count."
::= { dbpPerPeerStatsEntry 48 }
dbpPerPeerStatsPermanentFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
Zorn & Comerica Expires May 13, 2010 [Page 35]
Internet-Draft Diameter Base Protocol MIB November 2009
DESCRIPTION
"Number of permanent failures returned to peer."
::= { dbpPerPeerStatsEntry 49 }
dbpPerPeerStatsTransportDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unexpected transport failures."
::= { dbpPerPeerStatsEntry 50 }
dbpRealmMessageRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpRealmMessageRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter
Realm-based Message Route information."
::= { dbpRealmStats 1 }
dbpRealmMessageRouteEntry OBJECT-TYPE
SYNTAX DbpRealmMessageRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a Diameter
Realm Based Message Route server."
INDEX { dbpRealmMessageRouteIndex }
::= { dbpRealmMessageRouteTable 1 }
DbpRealmMessageRouteEntry ::= SEQUENCE {
dbpRealmMessageRouteIndex Unsigned32,
dbpRealmMessageRouteRealm SnmpAdminString,
dbpRealmMessageRouteApp Unsigned32,
dbpRealmMessageRouteType INTEGER,
dbpRealmMessageRouteAction INTEGER,
dbpRealmMessageRouteACRsIn Counter32,
dbpRealmMessageRouteACRsOut Counter32,
dbpRealmMessageRouteACAsIn Counter32,
dbpRealmMessageRouteACAsOut Counter32,
dbpRealmMessageRouteRARsIn Counter32,
dbpRealmMessageRouteRARsOut Counter32,
dbpRealmMessageRouteRAAsIn Counter32,
dbpRealmMessageRouteRAAsOut Counter32,
dbpRealmMessageRouteSTRsIn Counter32,
dbpRealmMessageRouteSTRsOut Counter32,
dbpRealmMessageRouteSTAsIn Counter32,
Zorn & Comerica Expires May 13, 2010 [Page 36]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpRealmMessageRouteSTAsOut Counter32,
dbpRealmMessageRouteASRsIn Counter32,
dbpRealmMessageRouteASRsOut Counter32,
dbpRealmMessageRouteASAsIn Counter32,
dbpRealmMessageRouteASAsOut Counter32,
dbpRealmMessageRouteAccRetrans Counter32,
dbpRealmMessageRouteAccDupReqsts Counter32,
dbpRealmMessageRoutePendReqstsOut Gauge32,
dbpRealmMessageRouteReqstsDrop Counter32 }
dbpRealmMessageRouteIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each Realm."
::= { dbpRealmMessageRouteEntry 1 }
dbpRealmMessageRouteRealm OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Realm name"
::= { dbpRealmMessageRouteEntry 2 }
dbpRealmMessageRouteApp OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Application id used to route packets
to this realm."
::= { dbpRealmMessageRouteEntry 3 }
dbpRealmMessageRouteType OBJECT-TYPE
SYNTAX INTEGER { acct(1),
auth(2),
both(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The types of service supported for each
realm application: accounting,
authentication or both."
::= { dbpRealmMessageRouteEntry 4 }
dbpRealmMessageRouteAction OBJECT-TYPE
Zorn & Comerica Expires May 13, 2010 [Page 37]
Internet-Draft Diameter Base Protocol MIB November 2009
SYNTAX INTEGER { local(1),
relay(2),
proxy(3),
redirect(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action is used to identify how a
message should be treated based on the realm,
application and type.
local - Diameter messages that resolve to a
route entry with the Local Action set to
Local can be satisfied locally, and do
not need to be routed to another server.
relay - All Diameter messages that fall within
this category MUST be routed to a
next-hop server, without modifying any
non-routing AVPs.
proxy - All Diameter messages that fall within this
category MUST be routed to a next-hop
server.
redirect - Diameter messages that fall within this
category MUST have the identity of the home
Diameter server(s) appended, and returned
to the sender of the message."
::= { dbpRealmMessageRouteEntry 5 }
dbpRealmMessageRouteACRsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Request messages
received from the realm."
::= { dbpRealmMessageRouteEntry 6 }
dbpRealmMessageRouteACRsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Request messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 7 }
dbpRealmMessageRouteACAsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
Zorn & Comerica Expires May 13, 2010 [Page 38]
Internet-Draft Diameter Base Protocol MIB November 2009
STATUS current
DESCRIPTION
"Number of Accounting-Answer messages
received from the realm."
::= { dbpRealmMessageRouteEntry 8 }
dbpRealmMessageRouteACAsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Accounting-Answer messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 9 }
dbpRealmMessageRouteRARsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Request messages
received from the realm."
::= { dbpRealmMessageRouteEntry 10 }
dbpRealmMessageRouteRARsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Request messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 11 }
dbpRealmMessageRouteRAAsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Answer messages
received from the realm."
::= { dbpRealmMessageRouteEntry 12 }
dbpRealmMessageRouteRAAsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Re-Auth-Answer messages
Zorn & Comerica Expires May 13, 2010 [Page 39]
Internet-Draft Diameter Base Protocol MIB November 2009
sent to the realm."
::= { dbpRealmMessageRouteEntry 13 }
dbpRealmMessageRouteSTRsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Request messages
received from the realm."
::= { dbpRealmMessageRouteEntry 14 }
dbpRealmMessageRouteSTRsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Request messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 15 }
dbpRealmMessageRouteSTAsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Answer messages
received from the realm."
::= { dbpRealmMessageRouteEntry 16 }
dbpRealmMessageRouteSTAsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Session-Termination-Answer messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 17 }
dbpRealmMessageRouteASRsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Request messages
received from the realm."
::= { dbpRealmMessageRouteEntry 18 }
Zorn & Comerica Expires May 13, 2010 [Page 40]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpRealmMessageRouteASRsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Request messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 19 }
dbpRealmMessageRouteASAsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Answer messages
received from the realm."
::= { dbpRealmMessageRouteEntry 20 }
dbpRealmMessageRouteASAsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Abort-Session-Answer messages
sent to the realm."
::= { dbpRealmMessageRouteEntry 21 }
dbpRealmMessageRouteAccRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Diameter accounting packets
retransmitted to this realm."
::= { dbpRealmMessageRouteEntry 22 }
dbpRealmMessageRouteAccDupReqsts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of duplicate Diameter accounting
packets sent to this realm."
::= { dbpRealmMessageRouteEntry 23 }
dbpRealmMessageRoutePendReqstsOut OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
Zorn & Comerica Expires May 13, 2010 [Page 41]
Internet-Draft Diameter Base Protocol MIB November 2009
STATUS current
DESCRIPTION
"The number of Diameter Accounting-Request packets
sent to this peer that have not yet timed out or
received a response. This variable is incremented when an
Accounting-Request is sent to this server and decremented
due to receipt of an Accounting-Response, a timeout or
a retransmission."
::= { dbpRealmMessageRouteEntry 24 }
dbpRealmMessageRouteReqstsDrop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requsts dropped by this realm."
::= { dbpRealmMessageRouteEntry 25 }
dbpRealmKnownPeersTable OBJECT-TYPE
SYNTAX SEQUENCE OF DbpRealmKnownPeersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the Diameter
Realms and known peers."
::= { dbpRealmCfgs 1 }
dbpRealmKnownPeersEntry OBJECT-TYPE
SYNTAX DbpRealmKnownPeersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry representing a Diameter
Realm and known peers."
INDEX { dbpRealmMessageRouteIndex,
dbpRealmKnownPeersIndex }
::= { dbpRealmKnownPeersTable 1 }
DbpRealmKnownPeersEntry ::= SEQUENCE {
dbpRealmKnownPeersIndex Unsigned32,
dbpRealmKnownPeers Unsigned32,
dbpRealmKnownPeersChosen INTEGER }
dbpRealmKnownPeersIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Zorn & Comerica Expires May 13, 2010 [Page 42]
Internet-Draft Diameter Base Protocol MIB November 2009
"A sequential identifier number."
::= { dbpRealmKnownPeersEntry 1 }
dbpRealmKnownPeers OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the peer this realm knows about.
This is an ordered list, where the ordering
signifies the order in which the peers are
tried. Same as the dbpPeerIndex"
::= { dbpRealmKnownPeersEntry 2 }
dbpRealmKnownPeersChosen OBJECT-TYPE
SYNTAX INTEGER { roundRobin(1),
loadBalance(2),
firstPreferred(3),
mostRecentFirst(4),
other(5) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"How the realm chooses which peer to send
packets to.
roundRobin - The peer used for each transaction
is selected based on the order in
which peers are configured.
loadBalance - The peer used for each transaction
is based on the load metric (maybe
implementation dependent) of all
peers defined for the realm, with
the least loaded server selected
first.
firstPreferred - The first defined server is always
used for transactions unless
failover occurs.
mostRecentFirst - The most recently used server is
used first for each transaction."
::= { dbpRealmKnownPeersEntry 3 }
-- Conformance
-- dbpMIBCompliances
diameterBaseProtocolMIBCompliances
OBJECT IDENTIFIER ::= { diameterBaseConform 1 }
diameterBaseProtocolMIBGroups
OBJECT IDENTIFIER ::= { diameterBaseConform 2 }
Zorn & Comerica Expires May 13, 2010 [Page 43]
Internet-Draft Diameter Base Protocol MIB November 2009
-- Compliance Statements
diameterBaseProtocolCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Diameter Base
Protocol entities."
MODULE -- this module
MANDATORY-GROUPS { dbpLocalCfgGroup,
dbpPeerCfgGroup,
dbpPeerStatsGroup,
dbpRealmCfgGroup,
dbpRealmStatsGroup,
dbpNotificationsGroup,
dbpNotifCfgGroup }
::= { diameterBaseProtocolMIBCompliances 1 }
-- Units of Conformance
dbpLocalCfgGroup OBJECT-GROUP
OBJECTS {
dbpLocalRealm,
dbpLocalOriginHost,
dbpLocalId,
dbpLocalIpAddrType,
dbpLocalIpAddress,
dbpLocalTcpListenPort,
dbpLocalSctpListenPort,
dbpLocalStatsTotalMessagesIn,
dbpLocalStatsTotalMessagesOut,
dbpLocalStatsTotalUpTime,
dbpLocalResetTime,
dbpLocalConfigReset,
dbpLocalApplStorageType,
dbpLocalApplRowStatus,
dbpAppAdvToPeerServices,
dbpAppAdvToPeerStorageType,
dbpAppAdvToPeerRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration common
to the server."
::= { diameterBaseProtocolMIBGroups 1 }
Zorn & Comerica Expires May 13, 2010 [Page 44]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpPeerCfgGroup OBJECT-GROUP
OBJECTS {
dbpPeerId,
dbpPeerPortConnect,
dbpPeerPortListen,
dbpPeerProtocol,
dbpPeerSecurity,
dbpPeerFirmwareRevision,
dbpPeerStorageType,
dbpPeerRowStatus,
dbpPeerIpAddressType,
dbpPeerIpAddress,
dbpPeerVendorId,
dbpPeerVendorStorageType,
dbpPeerVendorRowStatus,
dbpAppAdvFromPeerType
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration
of the Diameter peers."
::= { diameterBaseProtocolMIBGroups 2 }
dbpPeerStatsGroup OBJECT-GROUP
OBJECTS {
dbpPerPeerStatsState,
dbpPerPeerStatsStateDuration,
dbpPerPeerStatsLastDiscCause,
dbpPerPeerStatsWhoInitDisconnect,
dbpPerPeerStatsDWCurrentStatus,
dbpPerPeerStatsTimeoutConnAtmpts,
dbpPerPeerStatsASRsIn,
dbpPerPeerStatsASRsOut,
dbpPerPeerStatsASAsIn,
dbpPerPeerStatsASAsOut,
dbpPerPeerStatsACRsIn,
dbpPerPeerStatsACRsOut,
dbpPerPeerStatsACAsIn,
dbpPerPeerStatsACAsOut,
dbpPerPeerStatsCERsIn,
dbpPerPeerStatsCERsOut,
dbpPerPeerStatsCEAsIn,
dbpPerPeerStatsCEAsOut,
dbpPerPeerStatsDWRsIn,
dbpPerPeerStatsDWRsOut,
dbpPerPeerStatsDWAsIn,
dbpPerPeerStatsDWAsOut,
dbpPerPeerStatsDPRsIn,
Zorn & Comerica Expires May 13, 2010 [Page 45]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpPerPeerStatsDPRsOut,
dbpPerPeerStatsDPAsIn,
dbpPerPeerStatsDPAsOut,
dbpPerPeerStatsRARsIn,
dbpPerPeerStatsRARsOut,
dbpPerPeerStatsRAAsIn,
dbpPerPeerStatsRAAsOut,
dbpPerPeerStatsSTRsIn,
dbpPerPeerStatsSTRsOut,
dbpPerPeerStatsSTAsIn,
dbpPerPeerStatsSTAsOut,
dbpPerPeerStatsDWReqTimer,
dbpPerPeerStatsRedirectEvents,
dbpPerPeerStatsAccDupRequests,
dbpPerPeerStatsMalformedReqsts,
dbpPerPeerStatsAccsNotRecorded,
dbpPerPeerStatsAccRetrans,
dbpPerPeerStatsTotalRetrans,
dbpPerPeerStatsAccPendReqstsOut,
dbpPerPeerStatsAccReqstsDropped,
dbpPerPeerStatsHByHDropMessages,
dbpPerPeerStatsEToEDupMessages,
dbpPerPeerStatsUnknownTypes,
dbpPerPeerStatsProtocolErrors,
dbpPerPeerStatsTransientFailures,
dbpPerPeerStatsPermanentFailures,
dbpPerPeerStatsTransportDown,
dbpPerPeerStatsDWCurrentStatus,
dbpPerPeerStatsDWReqTimer,
dbpPerPeerStatsRedirectEvents,
dbpPerPeerStatsAccDupRequests,
dbpPerPeerStatsEToEDupMessages
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics
of the Diameter peers."
::= { diameterBaseProtocolMIBGroups 3 }
dbpNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
dbpProtocolErrorNotif,
dbpTransientFailureNotif,
dbpPermanentFailureNotif,
dbpPeerConnectionDownNotif,
dbpPeerConnectionUpNotif
}
Zorn & Comerica Expires May 13, 2010 [Page 46]
Internet-Draft Diameter Base Protocol MIB November 2009
STATUS current
DESCRIPTION
"The set of notifications which an agent is required
to implement."
::= { diameterBaseProtocolMIBGroups 4 }
dbpNotifCfgGroup OBJECT-GROUP
OBJECTS {
dbpProtocolErrorNotifEnabled,
dbpTransientFailureNotifEnabled,
dbpPermanentFailureNotifEnabled,
dbpPeerConnectionDownNotifEnabled,
dbpPeerConnectionUpNotifEnabled
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration for
base protocol notifications."
::= { diameterBaseProtocolMIBGroups 5 }
dbpRealmCfgGroup OBJECT-GROUP
OBJECTS {
dbpRealmKnownPeers,
dbpRealmKnownPeersChosen
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration for
Realm."
::= { diameterBaseProtocolMIBGroups 6 }
dbpRealmStatsGroup OBJECT-GROUP
OBJECTS {
dbpRealmMessageRouteRealm,
dbpRealmMessageRouteApp,
dbpRealmMessageRouteType,
dbpRealmMessageRouteAction,
dbpRealmMessageRouteACRsIn,
dbpRealmMessageRouteACRsOut,
dbpRealmMessageRouteACAsIn,
dbpRealmMessageRouteACAsOut,
dbpRealmMessageRouteRARsIn,
dbpRealmMessageRouteRARsOut,
dbpRealmMessageRouteRAAsIn,
dbpRealmMessageRouteRAAsOut,
dbpRealmMessageRouteSTRsIn,
dbpRealmMessageRouteSTRsOut,
dbpRealmMessageRouteSTAsIn,
Zorn & Comerica Expires May 13, 2010 [Page 47]
Internet-Draft Diameter Base Protocol MIB November 2009
dbpRealmMessageRouteSTAsOut,
dbpRealmMessageRouteASRsIn,
dbpRealmMessageRouteASRsOut,
dbpRealmMessageRouteASAsIn,
dbpRealmMessageRouteASAsOut,
dbpRealmMessageRouteAccRetrans,
dbpRealmMessageRouteAccDupReqsts,
dbpRealmMessageRoutePendReqstsOut,
dbpRealmMessageRouteReqstsDrop
}
STATUS current
DESCRIPTION
"A collection of objects providing statistics
of realm message routing."
::= { diameterBaseProtocolMIBGroups 7 }
END
5. IANA Considerations
IANA is requested to assign an OID under mib-2.
6. Security Considerations
There are managed objects defined in this MIB that have a MAX-ACCESS
clause of read-write and/or read-create. Such objects may be
considered sensitive or vulnerable in some network environments. The
support for SET operations in a non-secure environment without proper
protection can have a negative effect on network operations.
There are several of managed objects in this MIB that may contain
sensitive information. These are:
o diameterHostAddress
o diameterPeerServerAddress
o diameterPeerIpAddress
These can be used to determine the address of the Diameter host,
and/or peers with which the host is communicating. This information
could be useful in impersonating the host or peer.
It is important to control GET access to these objects and possibly
to even encrypt the values of these object when sending them over the
network via SNMP. Not all versions of SNMP provide features for such
Zorn & Comerica Expires May 13, 2010 [Page 48]
Internet-Draft Diameter Base Protocol MIB November 2009
a secure environment.
SNMPv1 by itself is not a secure environment. Even if the network
itself is secure (for example by using IPSec), there is no control as
to who on the secure network is allowed to access and GET (read) the
objects in this MIB.
It is recommended that the implementers consider the security
features as provided by the SNMPv3 framework. Specifically, the use
of the User-based Security Model [RFC3414] and the View-based Access
Control Model [RFC3415] is recommended.
It is then a customer/user responsibility to ensure that the SNMP
entity giving access to an instance of this MIB, is properly
configured to give access to the objects only to those principals
(users) that have legitimate rights to indeed GET or SET (change/
create/delete) them.
7. Contributors
This document is based upon and derived from work done by Jay
Koehler, Mark Eklund and Hai Li.
8. Acknowledgements
Thanks to David Battle for his participation and suggestions in
designing the table structures; Kevin Lingle, Sumanth Mithra, Tolga
Asveren, Tina Tsou, Mark Jones, John Loughney and Biswaranjan Panda
for reviewing the MIB and making invaluable suggestions; and Greg
Weber for his help in representing the MIB at IETF meetings.
9. References
9.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Structure of Management Information
Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Textual Conventions for SMIv2",
STD 58, RFC 2579, April 1999.
Zorn & Comerica Expires May 13, 2010 [Page 49]
Internet-Draft Diameter Base Protocol MIB November 2009
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Conformance Statements for SMIv2", STD 58, RFC 2580,
April 1999.
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An
Architecture for Describing Simple Network Management
Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
December 2002.
[RFC3588] Calhoun, P., Loughney, J., Guttman, E., Zorn, G., and J.
Arkko, "Diameter Base Protocol", RFC 3588, September 2003.
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
Schoenwaelder, "Textual Conventions for Internet Network
Addresses", RFC 4001, February 2005.
9.2. Informative References
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002.
[RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", STD 62, RFC 3414, December 2002.
[RFC3415] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based
Access Control Model (VACM) for the Simple Network
Management Protocol (SNMP)", STD 62, RFC 3415,
December 2002.
Authors' Addresses
Glen Zorn
Network Zen
1310 E. Thomas Street
Seattle, WA 98102
USA
Email: gwz@net-zen.net
Zorn & Comerica Expires May 13, 2010 [Page 50]
Internet-Draft Diameter Base Protocol MIB November 2009
Subash Comerica
Cisco Systems
Global Development Centre, Prestige Waterford
No. 9 Brunton Road
BGL3/MZ/
Bangalore, Karnataka 560025
India
Phone: +91 80 4103 6427
Email: subashtc@cisco.com
Zorn & Comerica Expires May 13, 2010 [Page 51]