Network Working Group Riza Cetin, Ed.
Internet Draft Alcatel
Proposed Status: Standards Track
Expires: Feb 2009 Thomas D. Nadeau, Ed.
BT
A S Kiran Koushik, Ed.
Cisco Systems, Inc.
Aug 2008
Multiprotocol Label Switching (MPLS) Traffic Engineering Management
Information Base for Fast Reroute
draft-ietf-mpls-fastreroute-mib-10.txt
Status of This Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/1id-abstracts.html
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html
Copyright Notice
Copyright (C) The IETF Trust (2008).
Abstract
This memo defines a portion of the Management Information Base
for use with network management protocols in the Internet community.
In particular, it describes managed objects used to support two
Nadeau, et al. Expires Feb 2009 [Page 1]
MPLS Fast-reroute MIB Aug 28, 2008
fast reroute (FRR) methods for Multiprotocol Label Switching
(MPLS) based traffic engineering (TE). The two methods are
one-to-one backup method and facility backup method.
Table of Contents
1. Introduction...............................................2
1.1. Conventions Used in This Document..........................3
2. Terminology................................................3
3. The Internet-Standard Management Framework.................3
4. Overview of the MIB Modules................................3
4.1. MPLS-FRR-GENERAL-STD-MIB...................................4
4.1.1 mplsFrrConstraintsTable....................................4
4.1.2 mplsFrrTunnelARHopTable....................................4
4.2. MPLS-FRR-ONE2ONE-STD-MIB...................................4
4.2.1 mplsFrrOne2OnePlrTable.....................................4
4.2.2 mplsFrrOne2OneDetourTable..................................4
4.2.3 Example of relationship between mplsFrrOne2OnePlrTable,
mplsFrrOne2OneDetourTable and mplsTunnelTable...............5
4.3 MPLS-FRR-FACILITY-STD-MIB..................................7
4.3.1 mplsFrrFacilityDBTable.....................................8
5. Handling IPv6 Tunnels......................................8
6.1 MPLS-FRR-GENERAL-STD-MIB Module Definitions................8
6.2 MPLS-FRR-ONE2ONE-STD-MIB Module Definitions...............21
6.3 MPLS-FRR-FACILITY-STD-MIB Module Definitions..............30
7. Security Considerations...................................41
8. IANA Considerations.......................................43
8.1 IANA Considerations for MPLS-FRR-GENERAL-STD-MIB..........43
8.2 IANA Considerations for MPLS-FRR-ONE2ONE-STD-MIB..........43
8.3 IANA Considerations for MPLS-FRR-FACILITY-STD-MIB.........43
9. Acknowledgments...........................................43
10. References................................................44
10.1 Normative References......................................44
10.2 Informative References....................................45
11. Editors' Addresses........................................45
12. Contributors' Addresses...................................45
1. Introduction
This memo defines a portion of the Management Information Base (MIB)
containing objects used to manage Multiprotocol Label
Switching (MPLS)-based fast rerouting features on MPLS Label
Switching Routers as defined in [RFC4090]. This MIB module should
be used in conjunction with [RFC3811], [RFC3812] and [RFC3813].
Comments should be made directly to the MPLS mailing list at
mpls@ietf.org.
Nadeau, et al. Expires Feb 2009 [Page 2]
MPLS Fast-reroute MIB Aug 28, 2008
1.1. Conventions Used in This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC-2119 [RFC2119].
2. Terminology
This document uses terminology from the document describing the
Multiprotocol Label Switching Architecture [RFC3031] and from
the document describing Fast Reroute Extensions to RSVP-TE for
LSP Tunnels [RFC4090].
3. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
[RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB module objects are
generally accessed through the Simple Network Management Protocol
(SNMP). Objects in the MIB are defined using the mechanisms defined
in the Structure of Management Information (SMI). This memo
specifies a MIB module that is compliant to the SMIv2, which is
described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579]
and STD 58, RFC 2580 [RFC2580].
4. Overview of the MIB Modules
The specification [RFC4090] stipulates two different approaches
to implementing MPLS TE fast reroute: one-to-one and facility
backup.
We define three MIB modules to represent the respective
components: general, one-to-one and facility backup.
They are:
- MPLS-FRR-GENERAL-STD-MIB: Contains objects that apply to any
MPLS LSR implementing MPLS TE fast reroute functionality.
- MPLS-FRR-ONE2ONE-STD-MIB: Contains objects that apply to
one-to-one backup method.
- MPLS-FRR-FACILITY-STD-MIB: Contains objects that apply to
facility backup method.
Although [RFC4090] specifies that a node is able to support both
fast reroute methods simultaneously, common practice has shown
that operators choose to configure either one-to-one backup method
Nadeau, et al. Expires Feb 2009 [Page 3]
MPLS Fast-reroute MIB Aug 28, 2008
or facility backup at any given time. So by dividing the MIB
modules into three, we allow the developers to choose the MIB
modules they want to implement depending on the method supported
on that node.
4.1. MPLS-FRR-GENERAL-STD-MIB
This MIB module MUST be implemented if either of the fast reroute
method is supported.
4.1.1 mplsFrrConstraintsTable
This table contains objects that apply to all LSRs
implementing MPLS TE fast reroute functions. In particular,
this table defines fast reroute constraints such as
bandwidth for a tunnel instance to be protected by using
backup LSPs (detour LSPs or bypass tunnels).
This table is MUST be implemented at the ingress node of the
protected TE tunnel instance to configure backup LSP setup
constraints.
4.1.2 mplsFrrTunnelARHopTable
This table extends mplsTunnelARHopTable (defined in the
MPLS-TE-STD-MIB [RFC3812]) with fast-reroute objects which
specify the local protection type or types of availability,
as well as what type or types are actally in-use for each
tunnel hop traversed by a protected TE tunnel.
This table MUST be supported when the Record Route Object (RRO)
is supported by the implementation.
4.2. MPLS-FRR-ONE2ONE-STD-MIB
This MIB module MUST be supported when one-to-one backup
fastreroute method is used.
4.2.1 mplsFrrOne2OnePlrTable
The mplsFrrOne2OnePlrTable contains information about PLRs that
initiated detour LSPs to protect tunnel instances. This table
MUST be supported for LSRs implementing the one-to-one backup
method.
In these cases, the detour LSPs are reflected in the
mplsFrrOne2OneDetourTable.
4.2.2 mplsFrrOne2OneDetourTable
Nadeau, et al. Expires Feb 2009 [Page 4]
MPLS Fast-reroute MIB Aug 28, 2008
The mplsFrrOne2OneDetourTable shows the detour LSPs in each node
(ingress, transit and egress nodes). An entry of this table
represents a detour LSP.
Each detour is identified by the following indexes:
- mplsTunnelIndex [RFC3812]:
set to the tunnel-id of an LSP protected by a detour.
- mplsTunnelInstance [RFC3812]: consists of two parts
1) the lower 16 bits: - protected TE tunnel instance
- uniquely identifies a protected
LSP within a tunnel.
2) the higher 16 bits: - detour instance
- uniquely identifies a detour LSP
of a protected TE tunnel instance.
Multiple detours of the same
protected LSP may go through the
same node. In this case, the
higher 16 bits of the tunnel
instance object is used as a
detour instance.
- ingress node's LSR ID (mplsFrrOne2OnePlrTunnelIngressLSRId):
set to the ingress node of an LSP protected by a detour.
- egress node's LSR ID (mplsFrrOne2OnePlrTunnelEgressLSRId):
set to the egress node of an LSP protected by a detour.
A detour LSP is also considered as an instance of a protected
TE tunnel. Therefore, each detour LSP SHOULD have an entry in
the mplsTunnelTable (defined in the MPLS-TE-STD-MIB[RFC3812]).
In the mplsTunnelTable, the higher 16 bits of the tunnel instance
SHOULD be used as a detour instance. Note that for the protected
TE tunnel instances, the higher 16 bits of the tunnel instance
MUST all be set to zero.
This table is MUST be supported if one-to-one backup method is
used.
4.2.3 Example of relationship between mplsFrrOne2OnePlrTable,
mplsFrrOne2OneDetourTable and mplsTunnelTable
This section contains an example depicting the inter
relationship between the mplsFrrOne2OnePlrTable,
mplsFrrOne2OneDetourTable and mplsTunnelTable tables.
Nadeau, et al. Expires Feb 2009 [Page 5]
MPLS Fast-reroute MIB Aug 28, 2008
[R1]----[R2]----[R3]------[R4]------[R5]
\ \ \ /
[R6]----[R7]----[R8]
Protected LSP: [R1->R2->R3->R4->R5]
R1's Backup: [R1->R6->R7->R8->R3]
In the above topology the various tables will be populated
as below.
In mplsFrrOne2OnePlrTable:
{
mplsFrrOne2OnePlrTunnelIndex = 1,
mplsFrrOne2OnePlrTunnelDetourInstance = 100, --Instance of R1
mplsFrrOne2OnePlrTunnelIngressLSRId = 192.0.2.1, --R1
mplsFrrOne2OnePlrTunnelEgressLSRId = 192.0.2.5, --R5
mplsFrrOne2OnePlrId = 192.0.2.1, -- R1 is PLR
mplsFrrOne2OnePlrSenderAddrType = ipv4(1),
mplsFrrOne2OnePlrSenderAddr = "192.0.2.1", -- R1
mplsFrrOne2OnePlrAvoidNodeAddrType = ipv4(1),
mplsFrrOne2OnePlrAvoidNodeAddr = "192.0.2.2",
-- R1-R2(Avoid)
}
In mplsFrrOne2OneDetourTable:
{
mplsFrrOne2OnePlrTunnelIndex = 1,
mplsFrrOne2OnePlrTunnelDetourInstance = 262145,
-- 100(tunnel instance of protected tunnel) << 16 | 1(tunnel
-- instance of detour).
-- To get all detours of a protected tunnel we could do
-- a snmpwalk of mplsFrrOne2OnePlrTunnelIndex.
-- (first 16 bits of)mplsFrrOne2OnePlrTunnelDetourInstance.
-- In this case: mplsFrrOne2OneDetourActive.1.262144
mplsFrrOne2OnePlrTunnelIngressLSRId = 192.0.2.1, --R1
mplsFrrOne2OnePlrTunnelEgressLSRId = 192.0.2.3, --R3
mplsFrrOne2OneDetourActive = false(2),
mplsFrrOne2OneDetourMergedStatus = notMerged(1),
mplsFrrOne2OneDetourMergedDetourInst = 0
}
In mplsTunnelTable(protected tunnel entry):
{
mplsTunnelIndex = 1,
mplsTunnelInstance = 100,-- Indicating protected tunnel
mplsTunnelIngressLSRId = 192.0.2.1,
mplsTunnelEgressLSRId = 192.0.2.5,
Nadeau, et al. Expires Feb 2009 [Page 6]
MPLS Fast-reroute MIB Aug 28, 2008
mplsTunnelName = "R1-R5",
mplsTunnelDescr = "R1-R5",
mplsTunnelIsIf = true (1),
mplsTunnelXCPointer = 0.0,
mplsTunnelSignallingProto = none (1),
mplsTunnelSetupPrio = 0,
mplsTunnelHoldingPrio = 0,
mplsTunnelSessionAttributes = 0,
mplsTunnelLocalProtectInUse = true(1),
mplsTunnelResourcePointer = mplsTunnelResourceMaxRate.5,
mplsTunnelInstancePriority = 1,
mplsTunnelHopTableIndex = 1,
mplsTunnelIncludeAnyAffinity = 0,
mplsTunnelIncludeAllAffinity = 0,
mplsTunnelExcludeAnyAffinity = 0,
mplsTunnelPathInUse = 1,
mplsTunnelRole = head (1),
}
In mplsTunnelTable(detour lsp entry):
{
mplsTunnelIndex = 1,
mplsTunnelInstance = 1,
-- Indicating detour lsp(higher 16 bits)
mplsTunnelIngressLSRId = 192.0.2.1,
mplsTunnelEgressLSRId = 192.0.2.3,
mplsTunnelName = "R1-R3",
mplsTunnelDescr = "R1-R3",
mplsTunnelIsIf = true (1),
mplsTunnelXCPointer = 0.0,
mplsTunnelSignallingProto = none (1),
mplsTunnelSetupPrio = 0,
mplsTunnelHoldingPrio = 0,
mplsTunnelSessionAttributes = 0,
mplsTunnelLocalProtectInUse = false (0),
mplsTunnelResourcePointer = mplsTunnelResourceMaxRate.6,
mplsTunnelInstancePriority = 1,
mplsTunnelHopTableIndex = 1,
mplsTunnelIncludeAnyAffinity = 0,
mplsTunnelIncludeAllAffinity = 0,
mplsTunnelExcludeAnyAffinity = 0,
mplsTunnelPathInUse = 1,
mplsTunnelRole = head (1),
}
4.3 MPLS-FRR-FACILITY-STD-MIB
This MIB module MUST be supported when facility backup
fastreroute method is used.
Nadeau, et al. Expires Feb 2009 [Page 7]
MPLS Fast-reroute MIB Aug 28, 2008
4.3.1 mplsFrrFacilityDBTable
The mplsFrrFacilityDBTable provides information about the fast
reroute database for facility-based fast reroute.
An entry is created in this table for each tunnel being
protected by a backup tunnel. Backup tunnels defined
to protect the tunnels traversing an interface.
The protecting tunnel is defined to exist on the PLR in
the MPLS TE fast reroute specification. Protected tunnels are
the LSPs that traverse the protected link.
This table MUST be supported when facility backup is used.
5. Handling IPv6 Tunnels
As described in [RFC4990], in order to support IPv6 MPLS
tunnels in the mplsTunnelTable [RFC3812] all LSRs in the network
MUST have a 32-bit LSR ID that can be used to identify the LSR
with the existing mplsTunnelIngressLSRId and mplsTunnelEgressLSRId
objects which are 32-bit long.
In this MIB, the following objects which refer to ingress/egress
LSRs will have then the 32-bit LSR ID to support IPv6 tunnels:
- mplsFrrOne2OnePlrTunnelIngressLSRId and
- mplsFrrOne2OnePlrTunnelEgressLSRId
objects of the mplsFrrOne2OnePlrTable,
- mplsFrrOne2OnePlrTunnelIngressLSRId and
- mplsFrrOne2OnePlrTunnelEgressLSRId
objects of the mplsFrrOne2OneDetourTable
- mplsFrrFacilityBackupTunnelIngressLSRId and
- mplsFrrFacilityBackupTunnelEgressLSRId
objects of the mplsFrrFacilityDBTable
6. MIB Module Definitions
6.1. MPLS-FRR-GENERAL-STD-MIB Module:
-- Start of MPLS-FRR-GENERAL-STD-MIB
MPLS-FRR-GENERAL-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32,
Counter32
FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF -- [RFC2580]
Nadeau, et al. Expires Feb 2009 [Page 8]
MPLS Fast-reroute MIB Aug 28, 2008
RowStatus, StorageType
FROM SNMPv2-TC -- [RFC2579]
InterfaceIndexOrZero,
ifGeneralInformationGroup,
ifCounterDiscontinuityGroup
FROM IF-MIB -- [RFC2863]
MplsTunnelIndex, MplsTunnelInstanceIndex,
MplsBitRate, mplsStdMIB,
MplsTunnelAffinity
FROM MPLS-TC-STD-MIB -- [RFC3811]
mplsTunnelGroup, mplsTunnelScalarGroup,
mplsTunnelARHopListIndex, mplsTunnelARHopIndex
FROM MPLS-TE-STD-MIB -- [RFC3812]
;
mplsFrrGeneralMIB MODULE-IDENTITY
LAST-UPDATED
"200809111200Z" -- 11 September 2008 12:00:00 GMT
ORGANIZATION
"Multiprotocol Label Switching (MPLS) Working Group"
CONTACT-INFO
"
Riza Cetin
Email: riza.cetin@alcatel.be
Thomas D. Nadeau
Email: tom.nadeau@bt.com
A S Kiran Koushik
Email: kkoushik@cisco.com
Stefaan De Cnodder
Email: Stefaan.de_cnodder@alcatel.be
Der-Hwa Gan
Email: dhg@juniper.net
"
DESCRIPTION
"Copyright (C) 2008 The IETF Trust. This version of this MIB
module is part of RFC xxxx; See the RFC itself for full
legal notices.
-- RFC EDITOR: please replace xxxx with actual number
-- and remove this note.
This MIB module contains generic object definitions for
MPLS Traffic Engineering Fast Reroute as defined in
RFC4090."
Nadeau, et al. Expires Feb 2009 [Page 9]
MPLS Fast-reroute MIB Aug 28, 2008
-- Revision history.
REVISION
"200809111200Z" -- 11 September 2008 12:00:00 GMT
DESCRIPTION
"Initial version. Published as RFC xxxx."
-- RFC-editor pls fill in xxxx
::= { mplsStdMIB yyy } -- RFC-editor please fill in
-- yyy with value assigned by IANA,
-- see section 18.1 for details
-- Top level components of this MIB module.
mplsFrrGeneral OBJECT IDENTIFIER
::= { mplsFrrGeneralMIB 1 }
-- objects that work for either method of FRR
mplsFrrGeneralObjects OBJECT IDENTIFIER
::= { mplsFrrGeneral 1 }
mplsFrrGeneralConformance OBJECT IDENTIFIER
::= { mplsFrrGeneral 2 }
-- MPLS Fast Reroute generic scalars.
mplsFrrGeneralProtectionMethod OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
oneToOneBackup(2),
facilityBackup(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates which protection method is to be used for fast
reroute on this device. Some devices may require a reboot
if this variable is to take affect after being modified.
The value of unknown(1) is read-only and cannot be set.
If the value of unknown(1) is set an inconsistentValue error
MUST be returned. It is provided to correct any
misconfiguration."
::= { mplsFrrGeneralObjects 1 }
mplsFrrGeneralSwitchover OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunnel instances for either detour LSPs or
bypass tunnels for which this LSR is the ingress."
::= { mplsFrrGeneralObjects 2 }
Nadeau, et al. Expires Feb 2009 [Page 10]
MPLS Fast-reroute MIB Aug 28, 2008
--
-- General FRR Table Section
--
-- These tables apply to both types of FRR
-- and should be implemented by all LSRs supporting
-- FRR.
--
-- MPLS Fast Reroute Constraints table
mplsFrrGeneralConstraintsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsFrrGeneralConstraintsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows detour LSP or bypass tunnel setup
constraints."
::= { mplsFrrGeneralObjects 3 }
mplsFrrGeneralConstraintsEntry OBJECT-TYPE
SYNTAX MplsFrrGeneralConstraintsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents detour LSP or bypass
tunnel setup constraints for a tunnel instance to be
protected by detour LSPs or a bypass tunnel.
Agents must only allow entries in this table to be
created for tunnel instances that require fast-reroute
as indicated by the presense of the FAST_REROUTE Object
in the signaling for the LSP in question.
Entries indexed with mplsFrrGeneralConstraintsIfIndexOrZero
set to 0
apply to all interfaces on this device for which the FRR
feature can operate.
Note that as per [RFC3812] the mplsTunnelInstance object
set to a value of 0 indicates that the mplsTunnelEntry
contains a tunnel ingress. This is typically how
configuration of this feature is performed on devices
where the actual protection LSP used is left up to the
protecting tunnel. However, in cases where static
configuration is possible, any valid tunnel
instance is possible; however, it is STRONGLY RECOMMENDED
that the instance index SHOULD use the following convention
to identify backup LSPs:
Nadeau, et al. Expires Feb 2009 [Page 11]
MPLS Fast-reroute MIB Aug 28, 2008
- lower 16 bits : protected tunnel instance
- higher 16 bits: must be all zeros
"
REFERENCE "Section 4.1 of RFC4090."
INDEX { mplsFrrGeneralConstraintsIfIndexOrZero,
mplsFrrGeneralConstraintsTunnelIndex,
mplsFrrGeneralConstraintsTunnelInstance
}
::= { mplsFrrGeneralConstraintsTable 1 }
MplsFrrGeneralConstraintsEntry ::= SEQUENCE {
mplsFrrGeneralConstraintsIfIndexOrZero InterfaceIndexOrZero,
mplsFrrGeneralConstraintsTunnelIndex MplsTunnelIndex,
mplsFrrGeneralConstraintsTunnelInstance MplsTunnelInstanceIndex,
mplsFrrGeneralConstraintsProtectionType INTEGER,
mplsFrrGeneralConstraintsSetupPrio Unsigned32,
mplsFrrGeneralConstraintsHoldingPrio Unsigned32,
mplsFrrGeneralConstraintsInclAnyAffinity MplsTunnelAffinity,
mplsFrrGeneralConstraintsInclAllAffinity MplsTunnelAffinity,
mplsFrrGeneralConstraintsExclAnyAffinity MplsTunnelAffinity,
mplsFrrGeneralConstraintsHopLimit Unsigned32,
mplsFrrGeneralConstraintsBandwidth MplsBitRate,
mplsFrrGeneralConstraintsStorageType StorageType,
mplsFrrGeneralConstraintsRowStatus RowStatus
}
mplsFrrGeneralConstraintsIfIndexOrZero OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies an interface which a fast reroute
protection tunnel is configured to potentially protect
in the event of a fault. Entries with this index set to
0 indicates that the protection tunnel configured protects
all interfaces on this device (i.e.: node protection)."
::= { mplsFrrGeneralConstraintsEntry 1 }
mplsFrrGeneralConstraintsTunnelIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a tunnel in the mplsTunnelTable which
is configured to possibly protect the interface(s) specified
by mplsFrrGeneralConstraintsIfIndexOrZero in the event of
a fault."
REFERENCE "mplsTunnelTable from RFC3812."
Nadeau, et al. Expires Feb 2009 [Page 12]
MPLS Fast-reroute MIB Aug 28, 2008
::= { mplsFrrGeneralConstraintsEntry 2 }
mplsFrrGeneralConstraintsTunnelInstance OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies an existing instance of this tunnel
for which fast reroute is requested. Note that a value of
0 indicates that the configuration points at a tunnel
head (as specified in RFC3812). This is typically how
configuration of this feature is performed on devices
where the actual protection LSP used is left up to the
protecting tunnel. However, in cases where static
configuration is possible, any valid tunnel
instance is permissible. In these cases, it is recommended
that the instance index follow the following convention
as to make identification of backup LSPs easier:
- lower 16 bits : protected tunnel instance
- higher 16 bits: must be all zeros"
::= { mplsFrrGeneralConstraintsEntry 3 }
mplsFrrGeneralConstraintsProtectionType OBJECT-TYPE
SYNTAX INTEGER { linkProtection(1),
nodeProtection(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates type of the resource protection:
linkProtection(1) indicates that this tunnel is
setup to protect a particular link's resources.
nodeProtection(2) indicates that this tunnel is
setup to protect an entire node from failure.
"
REFERENCE "Section 3 in RFC4090."
DEFVAL { nodeProtection }
::= { mplsFrrGeneralConstraintsEntry 4 }
mplsFrrGeneralConstraintsSetupPrio OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the setup priority of the detour LSP
or bypass tunnel."
Nadeau, et al. Expires Feb 2009 [Page 13]
MPLS Fast-reroute MIB Aug 28, 2008
REFERENCE
"Section 4.7 in RFC 3209"
DEFVAL { 7 }
::= { mplsFrrGeneralConstraintsEntry 5 }
mplsFrrGeneralConstraintsHoldingPrio OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the holding priority for detour LSP
or bypass tunnel."
REFERENCE
"Section 4.7 RFC 3209"
DEFVAL { 0 }
::= { mplsFrrGeneralConstraintsEntry 6 }
mplsFrrGeneralConstraintsInclAnyAffinity OBJECT-TYPE
SYNTAX MplsTunnelAffinity
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the include-any link constraint for the
detour LSP or bypass tunnel. A link satisfies the
include-any constraint if and only if the constraint
is zero, or the link and the constraint have a
resource class in common."
REFERENCE
"Section 4.7 in RFC 3209"
DEFVAL { 0 }
::= { mplsFrrGeneralConstraintsEntry 7 }
mplsFrrGeneralConstraintsInclAllAffinity OBJECT-TYPE
SYNTAX MplsTunnelAffinity
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the include-all link constraint for the
detour LSP or bypass tunnel. A link satisfies the
include-all constraint if and only if the link contains
all of the administrative groups specified in the
constraint."
REFERENCE
"Section 4.7 in RFC 3209"
DEFVAL { 0 }
::= { mplsFrrGeneralConstraintsEntry 8 }
mplsFrrGeneralConstraintsExclAnyAffinity OBJECT-TYPE
SYNTAX MplsTunnelAffinity
Nadeau, et al. Expires Feb 2009 [Page 14]
MPLS Fast-reroute MIB Aug 28, 2008
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the exclude-any link constraint for the
detour LSP or bypass tunnel. A link satisfies the
exclude-any constraint if and only if the link contains
none of the administrative groups specified in the
constraint."
REFERENCE
"Section 4.7 in RFC 3209"
DEFVAL { 0 }
::= { mplsFrrGeneralConstraintsEntry 9 }
mplsFrrGeneralConstraintsHopLimit OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of hops that the detour LSP or
bypass tunnel may traverse."
REFERENCE
"Section 4.1 in RFC4090."
DEFVAL { 32 }
::= { mplsFrrGeneralConstraintsEntry 10 }
mplsFrrGeneralConstraintsBandwidth OBJECT-TYPE
SYNTAX MplsBitRate
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum bandwidth specifically reserved for a detour
LSP or bypass tunnel, in units of thousands of bits
per second (Kbps). Note that setting this value to 0
indicates best-effort treatment."
DEFVAL { 0 }
::= { mplsFrrGeneralConstraintsEntry 11 }
mplsFrrGeneralConstraintsStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this configuration entry.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row."
REFERENCE
"RFC2579"
Nadeau, et al. Expires Feb 2009 [Page 15]
MPLS Fast-reroute MIB Aug 28, 2008
DEFVAL { volatile }
::= { mplsFrrGeneralConstraintsEntry 12 }
mplsFrrGeneralConstraintsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create, modify, and/or delete a row in
this table. When a row in this table is in active(1)
state, no objects in that row can be modified by the agent
except mplsFrrGeneralConstraintsRowStatus and
mplsFrrGeneralConstraintsStorageType."
::= { mplsFrrGeneralConstraintsEntry 13 }
-- MPLS Fast Reroute Tunnel Actual Route Hop table
mplsFrrGeneralTunnelARHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsFrrGeneralTunnelARHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table sparsely extends mplsTunnelARHopTable defined
in the MPLS-TE-STD-MIB MIB module with fast-reroute objects.
These objects specify the status of local protection including
availability and active use, on a per-hop basis, of hops
traversed by a protected tunnel. Note that object
availability in this table is governed by the support of
the Record Route Object in the RSVP-TE signaling of the
implementation."
::= { mplsFrrGeneralObjects 4 }
mplsFrrGeneralTunnelARHopEntry OBJECT-TYPE
SYNTAX MplsFrrGeneralTunnelARHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains fast-reroute protection status of a single
protected tunnel hop."
INDEX {
mplsTunnelARHopListIndex,
mplsTunnelARHopIndex
}
::= { mplsFrrGeneralTunnelARHopTable 1 }
MplsFrrGeneralTunnelARHopEntry ::= SEQUENCE {
mplsFrrGeneralTunnelARHopProtectType BITS,
mplsFrrGeneralTunnelARHopProtectTypeInUse BITS
}
Nadeau, et al. Expires Feb 2009 [Page 16]
MPLS Fast-reroute MIB Aug 28, 2008
mplsFrrGeneralTunnelARHopProtectType OBJECT-TYPE
SYNTAX BITS { node(0), bandwidth(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the protection type or types of the
associated path hop object. Note that since this object is a
BITS type, one, none or all of the bits may be set to indicate
various combinations of protection types."
REFERENCE
"See section 4 of RFC4090 where the SESSION_ATTRIBUTE
and RECORD_ROUTE objects are extended to
support bandwidth and node protection features."
::= { mplsFrrGeneralTunnelARHopEntry 1 }
mplsFrrGeneralTunnelARHopProtectTypeInUse OBJECT-TYPE
SYNTAX BITS { path(0), node(1),
link(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the protection type or types that are
currently in use by the associated path hop object.
Note that since this object is a BITS type, one, none or all
of the bits may be set to indicate various combinations of
protection types. If no bits are set, this indicates that
no protection types are in use."
REFERENCE
"See section 4 of RFC4090 where the SESSION_ATTRIBUTE
and RECORD_ROUTE objects are extended to
support bandwidth and node protection features."
::= { mplsFrrGeneralTunnelARHopEntry 2 }
-- Notifications
-- Module Conformance Statement
mplsFrrGeneralGroups
OBJECT IDENTIFIER ::= {mplsFrrGeneralConformance 1 }
mplsFrrGeneralCompliances
OBJECT IDENTIFIER ::= {mplsFrrGeneralConformance 2 }
mplsFrrGeneralModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statements for agents that support the
MPLS-FRR-GENERALSTD-MIB MIB module."
Nadeau, et al. Expires Feb 2009 [Page 17]
MPLS Fast-reroute MIB Aug 28, 2008
MODULE IF-MIB -- The Interfaces Group MIB module, RFC 2863.
MANDATORY-GROUPS {
ifGeneralInformationGroup,
ifCounterDiscontinuityGroup
}
MODULE MPLS-TE-STD-MIB -- The MPLS Traffic Engineering
-- MIB module, RFC 3812
MANDATORY-GROUPS {
mplsTunnelGroup,
mplsTunnelScalarGroup
}
MODULE -- this module
MANDATORY-GROUPS {
mplsFrrGeneralScalarGroup,
mplsFrrGeneralTunnelARHopGroup,
mplsFrrGeneralConstraintsGroup
}
OBJECT mplsFrrGeneralConstraintsRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait and notReady is
not required."
::= { mplsFrrGeneralCompliances 1 }
mplsFrrGeneralModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statements for agents that support the MPLS FRR
MIB."
MODULE
MANDATORY-GROUPS {
mplsFrrGeneralScalarGroup,
mplsFrrGeneralTunnelARHopGroup,
mplsFrrGeneralConstraintsGroup
}
-- Scalars
OBJECT mplsFrrGeneralProtectionMethod
MIN-ACCESS read-only
DESCRIPTION
Nadeau, et al. Expires Feb 2009 [Page 18]
MPLS Fast-reroute MIB Aug 28, 2008
"Write access is not required."
-- mplsFrrGeneralConstraintsTable
OBJECT mplsFrrGeneralConstraintsSetupPrio
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFrrGeneralConstraintsHoldingPrio
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFrrGeneralConstraintsInclAnyAffinity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFrrGeneralConstraintsInclAllAffinity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFrrGeneralConstraintsExclAnyAffinity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFrrGeneralConstraintsBandwidth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFrrGeneralConstraintsProtectionType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFrrGeneralConstraintsHopLimit
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFrrGeneralConstraintsStorageType
MIN-ACCESS read-only
DESCRIPTION
Nadeau, et al. Expires Feb 2009 [Page 19]
MPLS Fast-reroute MIB Aug 28, 2008
"Write access is not required."
OBJECT mplsFrrGeneralConstraintsRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { mplsFrrGeneralCompliances 2 }
-- Units of conformance
mplsFrrGeneralScalarGroup OBJECT-GROUP
OBJECTS {
mplsFrrGeneralSwitchover,
mplsFrrGeneralProtectionMethod
}
STATUS current
DESCRIPTION
"Objects that are required to display general fast reroute
information."
::= { mplsFrrGeneralGroups 1 }
mplsFrrGeneralConstraintsGroup OBJECT-GROUP
OBJECTS {
mplsFrrGeneralConstraintsProtectionType,
mplsFrrGeneralConstraintsSetupPrio,
mplsFrrGeneralConstraintsHoldingPrio,
mplsFrrGeneralConstraintsInclAnyAffinity,
mplsFrrGeneralConstraintsInclAllAffinity,
mplsFrrGeneralConstraintsExclAnyAffinity,
mplsFrrGeneralConstraintsHopLimit,
mplsFrrGeneralConstraintsBandwidth,
mplsFrrGeneralConstraintsStorageType,
mplsFrrGeneralConstraintsRowStatus
}
STATUS current
DESCRIPTION
"Objects that are required to configure fast reroute
constraints at the ingress LSR of the tunnel that requires
fast reroute service."
::= { mplsFrrGeneralGroups 2 }
mplsFrrGeneralTunnelARHopGroup OBJECT-GROUP
OBJECTS {
mplsFrrGeneralTunnelARHopProtectType,
mplsFrrGeneralTunnelARHopProtectTypeInUse
}
STATUS current
DESCRIPTION
Nadeau, et al. Expires Feb 2009 [Page 20]
MPLS Fast-reroute MIB Aug 28, 2008
"Objects that are required to present per hop fast-reroute
protection status."
::= { mplsFrrGeneralGroups 3}
END
-- End of MPLS-FRR-GENERAL-STD-MIB
6.2. MPLS-FRR-ONE2ONE-STD-MIB
-- Start of MPLS-FRR-ONE2ONE-STD-MIB
MPLS-FRR-ONE2ONE-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Gauge32
FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF -- [RFC2580]
TruthValue
FROM SNMPv2-TC -- [RFC2579]
MplsTunnelIndex, MplsTunnelInstanceIndex,
MplsLsrIdentifier, mplsStdMIB
FROM MPLS-TC-STD-MIB -- [RFC3811]
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB -- [RFC4001]
mplsFrrGeneralScalarGroup, mplsFrrGeneralTunnelARHopGroup,
mplsFrrGeneralConstraintsGroup
FROM MPLS-FRR-GENERAL-STD-MIB
;
mplsFrrOne2OneMIB MODULE-IDENTITY
LAST-UPDATED
"200809111200Z" -- 11 September 2008 12:00:00 GMT
ORGANIZATION
"Multiprotocol Label Switching (MPLS) Working Group"
CONTACT-INFO
"
Riza Cetin
Email: riza.cetin@alcatel.be
Thomas D. Nadeau
Email: tom.nadeau@bt.com
A S Kiran Koushik
Email: kkoushik@cisco.com
Stefaan De Cnodder
Nadeau, et al. Expires Feb 2009 [Page 21]
MPLS Fast-reroute MIB Aug 28, 2008
Email: Stefaan.de_cnodder@alcatel.be
Der-Hwa Gan
Email: dhg@juniper.net
"
DESCRIPTION
"Copyright (C) 2008 The IETF Trust. This version of this MIB
module is part of RFC xxxx; See the RFC itself for full
legal notices.
-- RFC EDITOR: please replace xxxx with actual number
-- and remove this note.
This MIB module contains object definitions for
MPLS Traffic Engineering one-to-one backup method for
Fast Reroute as defined in RFC4090."
-- Revision history.
REVISION
"200809111200Z" -- 11 September 2008 12:00:00 GMT
DESCRIPTION
"Initial version. Published as RFC xxxx."
-- RFC-editor pls fill in xxxx
::= { mplsStdMIB yyy } -- RFC-editor please fill in
-- yyy with value assigned by IANA,
-- see section 18.1 for details
-- Top level components of this MIB module.
mplsFrrOne2One OBJECT IDENTIFIER
::= { mplsFrrOne2OneMIB 1 }
-- objects defined for 1-to-1 style FRR
mplsFrrOne2OneScalars OBJECT IDENTIFIER
::= { mplsFrrOne2One 1 }
mplsFrrOne2OneObjects OBJECT IDENTIFIER
::= { mplsFrrOne2One 2 }
mplsFrrOne2OneConformance OBJECT IDENTIFIER
::= { mplsFrrOne2One 3 }
-- Scalar objects defined for 1-to-1 style FRR
mplsFrrIncomingDetourLSPs OBJECT-TYPE
SYNTAX Integer32 (-1|0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of detour LSPs entering the device
Nadeau, et al. Expires Feb 2009 [Page 22]
MPLS Fast-reroute MIB Aug 28, 2008
(greater than or equal to 0) if mplsFrrProtectionMethod
is set to oneToOneBackup(1), or -1 if
mplsFrrProtectionMethod is set to facilityBackup(2)."
DEFVAL { 0 }
::= { mplsFrrOne2OneScalars 1 }
mplsFrrOutgoingDetourLSPs OBJECT-TYPE
SYNTAX Integer32 (-1|0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of detour LSPs leaving the device (greater
than or equal to 0) if mplsFrrProtectionMethod
is set to oneToOneBackup(1), or -1 if
mplsFrrProtectionMethod is set to
facilityBackup(2)."
DEFVAL { 0 }
::= { mplsFrrOne2OneScalars 2 }
mplsFrrOne2OneDetourOriginating OBJECT-TYPE
SYNTAX Integer32(-1|0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of detour LSPs originating at this PLR (greater
than or equal to 0) if mplsFrrProtectionMethod
is set to oneToOneBackup(1). This object MUST
return -1 if the mplsFrrProtectionMethod is set to
facilityBackup(2)."
DEFVAL { 0 }
::= { mplsFrrOne2OneScalars 3 }
mplsFrrActiveProtectedLSPs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of LSPs currently protected by
the FRR feature where this device acts as the PLR
for those LSPs. If mplsFrrProtectionMethod
is set to facilityBackup(2) this object MUST be
0 and should be ignored."
DEFVAL { 0 }
::= { mplsFrrOne2OneScalars 4 }
--
-- One-to-One Specific Tables
--
-- Tables in this section pertain only to the 1-1
Nadeau, et al. Expires Feb 2009 [Page 23]
MPLS Fast-reroute MIB Aug 28, 2008
-- style of FRR.
--
-- MPLS Fast Reroute Point of Local Repair table
mplsFrrOne2OnePlrTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsFrrOne2OnePlrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows a list of protected TE tunnels with
the corresponding protecting tunnel, as well as the PLR
where the protecting tunnel that initiated the detour
LSPs traverse this node."
::= { mplsFrrOne2OneObjects 1 }
mplsFrrOne2OnePlrEntry OBJECT-TYPE
SYNTAX MplsFrrOne2OnePlrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a protected tunnel LSP
together with its detour tunnel instance. An entry in
this table is only created by an SNMP agent as instructed
by an MPLS signaling protocol.
The entries of this table are present in all LSRs on the path
of the detour LSP.
The objects mplsFrrOne2OnePlrSenderAddrType and
mplsFrrOne2OnePlrSenderAddr can be modified after the row
is created.
The objects mplsFrrOne2OnePlrTunnelIndex,
mplsFrrOne2OnePlrTunnelDetourInstance,
mplsFrrOne2OnePlrTunnelIngressLSRId
and mplsFrrOne2OnePlrTunnelEgressLSRId have the same values as
the objects mplsTunnelIndex, mplsTunnelInstance,
mplsTunnelIngressLSRId and mplsTunnelEgressLSRId of the detour
tunnel instance created in the mplsTunnelTable
(MPLS-TE-STD-MIB)."
INDEX { mplsFrrOne2OnePlrTunnelIndex, -- from MPLS-TE-STD-MIB
mplsFrrOne2OnePlrTunnelDetourInstance,-- mplsTunnelTable
mplsFrrOne2OnePlrTunnelIngressLSRId,-- Tunnels must exist
mplsFrrOne2OnePlrTunnelEgressLSRId, -- a priori
mplsFrrOne2OnePlrId }
::= { mplsFrrOne2OnePlrTable 1 }
MplsFrrOne2OnePlrEntry ::= SEQUENCE {
Nadeau, et al. Expires Feb 2009 [Page 24]
MPLS Fast-reroute MIB Aug 28, 2008
mplsFrrOne2OnePlrTunnelIndex MplsTunnelIndex,
mplsFrrOne2OnePlrTunnelDetourInstance MplsTunnelInstanceIndex,
mplsFrrOne2OnePlrTunnelIngressLSRId MplsLsrIdentifier,
mplsFrrOne2OnePlrTunnelEgressLSRId MplsLsrIdentifier,
mplsFrrOne2OnePlrId MplsLsrIdentifier,
mplsFrrOne2OnePlrSenderAddrType InetAddressType,
mplsFrrOne2OnePlrSenderAddr InetAddress,
mplsFrrOne2OnePlrAvoidNodeAddrType InetAddressType,
mplsFrrOne2OnePlrAvoidNodeAddr InetAddress
}
mplsFrrOne2OnePlrTunnelIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a tunnel between a pair of LSRs
from the mplsTunnelEntry."
::= { mplsFrrOne2OnePlrEntry 1 }
mplsFrrOne2OnePlrTunnelDetourInstance OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a detour instance of a tunnel from
the mplsTunnelEntry.
- lower 16 bits : protected tunnel instance
- higher 16 bits: detour instance"
::= { mplsFrrOne2OnePlrEntry 2 }
mplsFrrOne2OnePlrTunnelIngressLSRId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The purpose of this object is to uniquely identify a
tunnel within a network. When the MPLS signalling
protocol is rsvp(2) this object SHOULD contain the
same value as the Extended Tunnel Id field in the
SESSION object. When the MPLS signalling protocol
is crldp(3) this object SHOULD contain the same
value as the Ingress LSR Router ID field in the
LSPID TLV object.
This value represents the head-end of the protected
tunnel instance."
REFERENCE
Nadeau, et al. Expires Feb 2009 [Page 25]
MPLS Fast-reroute MIB Aug 28, 2008
"RFC3209"
::= { mplsFrrOne2OnePlrEntry 3 }
mplsFrrOne2OnePlrTunnelEgressLSRId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the egress LSR ID of the protected tunnel instance."
::= { mplsFrrOne2OnePlrEntry 4 }
mplsFrrOne2OnePlrId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value represents the PLR that has initiated a detour LSP
to protect a tunnel instance.
This value is signalled via the DETOUR object defined in MPLS
RSVP protocol."
REFERENCE
"RFC4090"
::= { mplsFrrOne2OnePlrEntry 5 }
mplsFrrOne2OnePlrSenderAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the address type of this detour instance's sender
address."
DEFVAL { ipv4 }
::= { mplsFrrOne2OnePlrEntry 6 }
mplsFrrOne2OnePlrSenderAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the PLR which has initiated the detour LSP.
The type of this address is determined by the value of the
mplsFrrOne2OnePlrSenderAddrType object."
::= { mplsFrrOne2OnePlrEntry 7 }
mplsFrrOne2OnePlrAvoidNodeAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Nadeau, et al. Expires Feb 2009 [Page 26]
MPLS Fast-reroute MIB Aug 28, 2008
"Denotes the address type of the node that this PLR tries to
avoid."
DEFVAL { ipv4 }
::= { mplsFrrOne2OnePlrEntry 8 }
mplsFrrOne2OnePlrAvoidNodeAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the node that this PLR tries to avoid.
The type of this address is determined by the value of the
mplsFrrOne2OnePlrAvoidNodeAddrType object.
This value is signalled via the DETOUR object defined in MPLS
RSVP protocol."
REFERENCE
"RFC4090"
::= { mplsFrrOne2OnePlrEntry 9 }
-- MPLS One-To-One Fast Reroute Detour table.
mplsFrrOne2OneDetourTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsFrrOne2OneDetourEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows detour LSPs."
::= { mplsFrrOne2OneObjects 2 }
mplsFrrOne2OneDetourEntry OBJECT-TYPE
SYNTAX MplsFrrOne2OneDetourEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a detour. An entry in this
table is only created by an SNMP agent as instructed by an MPLS
signaling protocol. "
INDEX {
mplsFrrOne2OnePlrTunnelIndex, -- from MPLS-TE-STD-MIB
mplsFrrOne2OnePlrTunnelDetourInstance, -- mplsTunnelTable
mplsFrrOne2OnePlrTunnelIngressLSRId,-- Tunnels must exist
mplsFrrOne2OnePlrTunnelEgressLSRId -- a priori
}
::= { mplsFrrOne2OneDetourTable 1 }
MplsFrrOne2OneDetourEntry ::= SEQUENCE {
mplsFrrOne2OneDetourActive TruthValue,
mplsFrrOne2OneDetourMergedStatus INTEGER,
mplsFrrOne2OneDetourMergedDetourInst MplsTunnelInstanceIndex
Nadeau, et al. Expires Feb 2009 [Page 27]
MPLS Fast-reroute MIB Aug 28, 2008
}
mplsFrrOne2OneDetourActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not the main LSP has switched over to
this detour LSP.
If the value of this object is 'true', then it means that
the main LSP has switched over to this detour LSP. Otherwise
it contains a value of 'false'.
This is only relevant for detours originated by this node."
::= { mplsFrrOne2OneDetourEntry 1 }
mplsFrrOne2OneDetourMergedStatus OBJECT-TYPE
SYNTAX INTEGER { notMerged(1),
mergedWithProtectedTunnel(2),
mergedWithDetour(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents whether or not this detour is merged.
This value is set to notMerged(1) if this detour is not
merged.
This value is set to mergedWithProtectedTunnel(2) if
this detour is merged with the protected tunnel. This value
is mergedWithDetour(3) if this detour is merged
with another detour protecting the same tunnel."
::= { mplsFrrOne2OneDetourEntry 2 }
mplsFrrOne2OneDetourMergedDetourInst OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the mplsTunnelInstance of the detour
with which this detour is merged. This object is only valid
when mplsFrrOne2OneDetourMergedStatus is set to
mergedWithDetour(3).
- lower 16 bits : protected tunnel instance
- higher 16 bits: detour instance"
::= { mplsFrrOne2OneDetourEntry 3 }
-- Module Conformance Statement
mplsFrrOne2OneGroups
Nadeau, et al. Expires Feb 2009 [Page 28]
MPLS Fast-reroute MIB Aug 28, 2008
OBJECT IDENTIFIER ::= {mplsFrrOne2OneConformance 1 }
mplsFrrOne2OneCompliances
OBJECT IDENTIFIER ::= {mplsFrrOne2OneConformance 2 }
mplsFrrOne2OneModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statements for agents that support the
MPLS-FRR-ONE2ONE-STD-MIB MIB module."
MODULE MPLS-FRR-GENERAL-STD-MIB -- MPLS FRR Generic MIB
MANDATORY-GROUPS {
mplsFrrGeneralScalarGroup,
mplsFrrGeneralTunnelARHopGroup,
mplsFrrGeneralConstraintsGroup
}
MODULE -- this module
MANDATORY-GROUPS {
mplsFrrOne2OneScalarsGroup,
mplsFrrOne2OnePLRDetourGroup,
mplsFrrOne2OnePlrGroup
}
::= { mplsFrrOne2OneCompliances 1 }
mplsFrrOne2OneModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statements for agents that support the MPLS FRR
ONE2ONE MIB."
MODULE
MANDATORY-GROUPS {
mplsFrrOne2OneScalarsGroup,
mplsFrrOne2OnePLRDetourGroup,
mplsFrrOne2OnePlrGroup
}
-- mplsFrrOne2OnePlrTable
OBJECT mplsFrrOne2OnePlrSenderAddrType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsFrrOne2OnePlrSenderAddr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
Nadeau, et al. Expires Feb 2009 [Page 29]
MPLS Fast-reroute MIB Aug 28, 2008
::= { mplsFrrOne2OneCompliances 2 }
-- Units of conformance
mplsFrrOne2OneScalarsGroup OBJECT-GROUP
OBJECTS {
mplsFrrIncomingDetourLSPs,
mplsFrrOutgoingDetourLSPs,
mplsFrrOne2OneDetourOriginating,
mplsFrrActiveProtectedLSPs
}
STATUS current
DESCRIPTION
"Objects that are required general One-2-One PLR information."
::= { mplsFrrOne2OneGroups 1 }
mplsFrrOne2OnePLRDetourGroup OBJECT-GROUP
OBJECTS {
mplsFrrOne2OneDetourActive,
mplsFrrOne2OneDetourMergedStatus,
mplsFrrOne2OneDetourMergedDetourInst
}
STATUS current
DESCRIPTION
"Objects that are required to present the detour LSP
information at the detour ingress, transit and egress LSRs."
::= { mplsFrrOne2OneGroups 2 }
mplsFrrOne2OnePlrGroup OBJECT-GROUP
OBJECTS {
mplsFrrOne2OnePlrSenderAddrType,
mplsFrrOne2OnePlrSenderAddr,
mplsFrrOne2OnePlrAvoidNodeAddrType,
mplsFrrOne2OnePlrAvoidNodeAddr
}
STATUS current
DESCRIPTION
"Objects that are required to represent the FRR
One-2-One PLR information."
::= { mplsFrrOne2OneGroups 3 }
END
-- End of MPLS-FRR-ONE2ONE-STD-MIB
6.3. MPLS-FRR-FACILITY-STD-MIB
Nadeau, et al. Expires Feb 2009 [Page 30]
MPLS Fast-reroute MIB Aug 28, 2008
-- Start of MPLS-FRR-FACILITY-STD-MIB
MPLS-FRR-FACILITY-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32,
NOTIFICATION-TYPE, Gauge32
FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
TruthValue
FROM SNMPv2-TC -- [RFC2579]
InterfaceIndex
FROM IF-MIB -- [RFC2863]
MplsTunnelIndex, MplsTunnelInstanceIndex,
MplsLsrIdentifier, MplsBitRate, mplsStdMIB
FROM MPLS-TC-STD-MIB -- [RFC3811]
mplsFrrGeneralScalarGroup, mplsFrrGeneralTunnelARHopGroup,
mplsFrrGeneralConstraintsGroup
FROM MPLS-FRR-GENERAL-STD-MIB
;
mplsFrrFacilityMIB MODULE-IDENTITY
LAST-UPDATED
"200809111200Z" -- 11 September 2008 12:00:00 GMT
ORGANIZATION
"Multiprotocol Label Switching (MPLS) Working Group"
CONTACT-INFO
"
Riza Cetin
Email: riza.cetin@alcatel.be
Thomas D. Nadeau
Email: tom.nadeau@bt.com
A S Kiran Koushik
Email: kkoushik@cisco.com
Stefaan De Cnodder
Email: Stefaan.de_cnodder@alcatel.be
Der-Hwa Gan
Email: dhg@juniper.net
"
DESCRIPTION
"Copyright (C) 2008 The IETF Trust. This version of this MIB
Nadeau, et al. Expires Feb 2009 [Page 31]
MPLS Fast-reroute MIB Aug 28, 2008
module is part of RFC xxxx; See the RFC itself for full
legal notices.
-- RFC EDITOR: please replace xxxx with actual number
-- and remove this note.
This MIB module contains object definitions for
MPLS Traffic Engineering facility backup method for
Fast Reroute as defined in RFC4090."
-- Revision history.
REVISION
"200809111200Z" -- 11 September 2008 12:00:00 GMT
DESCRIPTION
"Initial version. Published as RFC xxxx."
-- RFC-editor pls fill in xxxx
::= { mplsStdMIB yyy } -- RFC-editor please fill in
-- yyy with value assigned by IANA,
-- see section 18.1 for details
-- Top level components of this MIB module.
mplsFrrFacilityNotifications OBJECT IDENTIFIER
::= { mplsFrrFacilityMIB 0 }
mplsFrrFacility OBJECT IDENTIFIER
::= { mplsFrrFacilityMIB 1 }
-- objects defined for Facility Backup style FRR
mplsFrrFacilityObjects OBJECT IDENTIFIER
::= { mplsFrrFacility 1 }
mplsFrrFacilityConformance OBJECT IDENTIFIER
::= { mplsFrrFacility 2 }
-- Scalar objects defined for Facility Backup style FRR
mplsFrrConfiguredInterfaces OBJECT-TYPE
SYNTAX Integer32(-1|0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of MPLS interfaces configured for
protection by the FRR feature if
mplsFrrProtectionMethod
is set to facilityBackup(2), otherwise this value
MUST return -1 to indicate that LSPs traversing any
interface are not protected."
DEFVAL { 0 }
::= { mplsFrrFacilityObjects 1 }
Nadeau, et al. Expires Feb 2009 [Page 32]
MPLS Fast-reroute MIB Aug 28, 2008
mplsFrrActiveInterfaces OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of interfaces currently being
protected by the FRR feature if
mplsFrrProtectionMethod is set to
facilityBackup(2), otherwise this value should return
0 to indicate that LSPs traversing any interface may
not be protected. This value MUST be less than or equal
to mplsFrrConfiguredInterfaces except when
mplsFrrConfiguredInterfaces is set to -1, in which case
the value of this object is meaningless and SHOULD be
ignored."
DEFVAL { 0 }
::= { mplsFrrFacilityObjects 2 }
mplsFrrConfiguredBypassTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of bypass tunnels configured to
protect TE tunnels on this LSR using the FRR feature
if mplsFrrProtectionMethod is set to
facilityBackup(2), otherwise this value MUST return
0 and SHOULD be ignored."
DEFVAL { 0 }
::= { mplsFrrFacilityObjects 3 }
mplsFrrActiveBypassTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of bypass tunnels indicated in
mplsFrrConfiguredBypassTunnels whose operStatus
is up(1) indicating that they are currently protecting
TE tunnels on this LSR using the FRR feature. This
object MUST return 0 if mplsFrrProtectionMethod
is set to oneToOneBackup(1)."
DEFVAL { 0 }
::= { mplsFrrFacilityObjects 4 }
mplsFrrFacilityNotificationsEnabled OBJECT-TYPE
SYNTAX TruthValue
Nadeau, et al. Expires Feb 2009 [Page 33]
MPLS Fast-reroute MIB Aug 28, 2008
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables FRR notifications defined in this
MIB module. Notifications are disabled by default.
This object is needed to control the notifications
emitted by this implementation."
DEFVAL { false }
::= { mplsFrrFacilityObjects 5 }
mplsFrrFacilityNotificationsMaxRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "Notifications per Second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates the maximum number of
notifications issued per second. If events occur
more rapidly, the implementation may simply fail to
emit these notifications during that period, or may
queue them until an appropriate time. In case the
implementation chooses to drop the events during
throttling instead of queuing them to be sent at a later
time, it is assumed that there will be no indication
that events are being thrown away.
A value of 0 means no throttling is applied and
events may be generated at the rate at which they occur."
DEFVAL { 0 }
::= { mplsFrrFacilityObjects 6 }
--
-- Facility-based FRR-specific Tables
--
-- Tables in this section pertain only to the facility-
-- based style of FRR.
--
mplsFrrFacilityDBTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsFrrFacilityDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mplsFrrFacilityDBTable provides information about the
fast reroute database. Each entry belongs to a protected
interface, protecting backup tunnel and protected tunnel.
MPLS interfaces defined on this node are protected by
backup tunnels and are indicated by the index
Nadeau, et al. Expires Feb 2009 [Page 34]
MPLS Fast-reroute MIB Aug 28, 2008
mplsFrrFacilityProtectedIfIndex. If the interface index is
set to 0, this indicates that the remaining indexes apply
to all configured protected interfaces.
The protecting tunnel is indicated by the
index mplsFrrFacilityProtectingTunnelIndex and
represents a valid mplsTunnelEntry. Note that the tunnel
instance index of the protecting tunnel may be set to 0
which indicates the tunnel head interface for the
protecting tunnel, as per RFC3812, but it may also be
defined using the following semantics:
- lower 16 bits : protected tunnel instance
- higher 16 bits: must be all zeros
"
::= { mplsFrrFacilityObjects 7 }
mplsFrrFacilityDBEntry OBJECT-TYPE
SYNTAX MplsFrrFacilityDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the mplsFrrFacilityDBTable represents a single
protected LSP, protected by a backup tunnel on a
specific protected interface, or if the interface
index is set to 0, on all interfaces. Note that for
brevity, managers should consult the mplsTunnelTable
present in the MPLS-TE-STD-MIB MIB module for
additional information about the protecting and protected
tunnels, and the ifEntry in the IF-MIB MIB module
for the protected interface."
INDEX {
mplsFrrFacilityProtectedIfIndex, -- protected ifIndex
mplsFrrFacilityProtectingTunnelIndex,-- protecting TE tun
mplsFrrFacilityBackupTunnelIndex, -- protected TE tun
mplsFrrFacilityBackupTunnelInstance, -- LSP
mplsFrrFacilityBackupTunnelIngressLSRId,
mplsFrrFacilityBackupTunnelEgressLSRId }
::= { mplsFrrFacilityDBTable 1 }
MplsFrrFacilityDBEntry ::= SEQUENCE {
mplsFrrFacilityProtectedIfIndex InterfaceIndex,
mplsFrrFacilityProtectingTunnelIndex MplsTunnelIndex,
mplsFrrFacilityBackupTunnelIndex MplsTunnelIndex,
mplsFrrFacilityBackupTunnelInstance MplsTunnelInstanceIndex,
mplsFrrFacilityBackupTunnelIngressLSRId MplsLsrIdentifier,
mplsFrrFacilityBackupTunnelEgressLSRId MplsLsrIdentifier,
mplsFrrFacilityDBNumProtectingTunnelOnIf Gauge32,
mplsFrrFacilityDBNumProtectedLspOnIf Gauge32,
Nadeau, et al. Expires Feb 2009 [Page 35]
MPLS Fast-reroute MIB Aug 28, 2008
mplsFrrFacilityDBNumProtectedTunnels Gauge32,
mplsFrrFacilityDBProtectingTunnelStatus INTEGER,
mplsFrrFacilityDBProtectingTunnelResvBw MplsBitRate
}
mplsFrrFacilityProtectedIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies the interface configured for FRR
protection. If this object is set to 0, this indicates
that the remaining indexing combinations for this row
apply to all interfaces on this device for which
the FRR feature can operate."
::= { mplsFrrFacilityDBEntry 1 }
mplsFrrFacilityProtectingTunnelIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies the mplsTunnelEntry primary index for
the tunnel head interface designated to protect the
interface as specified in the mplsFrrFacilityProtectedIfIndex
(and all of the tunnels using this interface). Note
that the corresponding mplsTunnelInstance MUST BE
0 as per the indexing convention stipulated."
REFERENCE
"RFC3812"
::= { mplsFrrFacilityDBEntry 2 }
mplsFrrFacilityBackupTunnelIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies the mplsTunnelEntry primary index for
the TE tunnel LSP being protected on the
interface as specified by mplsFrrFacilityProtectedIfIndex."
::= { mplsFrrFacilityDBEntry 3 }
mplsFrrFacilityBackupTunnelInstance OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies the mplsTunnelEntry secondary index
Nadeau, et al. Expires Feb 2009 [Page 36]
MPLS Fast-reroute MIB Aug 28, 2008
for the TE tunnel LSP being protected on the
interface as specified by mplsFrrFacilityProtectedIfIndex."
::= { mplsFrrFacilityDBEntry 4 }
mplsFrrFacilityBackupTunnelIngressLSRId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies the mplsTunnelEntry third index
for the TE tunnel LSP being protected on the
interface as specified by mplsFrrFacilityProtectedIfIndex."
REFERENCE
"RFC3209, RFC3212"
::= { mplsFrrFacilityDBEntry 5 }
mplsFrrFacilityBackupTunnelEgressLSRId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies the mplsTunnelEntry fourth index
for the TE tunnel LSP being protected on the
interface as specified by mplsFrrFacilityProtectedIfIndex."
::= { mplsFrrFacilityDBEntry 6 }
mplsFrrFacilityDBNumProtectingTunnelOnIf OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of backup tunnels protecting the
interface specified by mplsFrrFacilityProtectedIfIndex."
::= { mplsFrrFacilityDBEntry 7 }
mplsFrrFacilityDBNumProtectedLspOnIf OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LSPs currently being protected on
the interface specified by
mplsFrrFacilityProtectedIfIndex."
::= { mplsFrrFacilityDBEntry 8 }
mplsFrrFacilityDBNumProtectedTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
Nadeau, et al. Expires Feb 2009 [Page 37]
MPLS Fast-reroute MIB Aug 28, 2008
DESCRIPTION
"The number of tunnels protected on the interface
specified by mplsFrrFacilityProtectedIfIndex."
::= { mplsFrrFacilityDBEntry 9 }
mplsFrrFacilityDBProtectingTunnelStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
ready(2),
partial(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the state of the protecting tunnel as
specified by mplsFrrFacilityProtectingTunnelIndex.
active This tunnel's label has been placed in the
LFIB and is ready to be applied to incoming
packets.
ready - This tunnel's label entry has been created but is
not yet in the LFIB.
partial - This tunnel's label entry as not been fully
created."
::= { mplsFrrFacilityDBEntry 10 }
mplsFrrFacilityDBProtectingTunnelResvBw OBJECT-TYPE
SYNTAX MplsBitRate
UNITS "kilobits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the amount of bandwidth in units
of '1,000 bits per second', actually reserved by
the protecting tunnel for facility backup purposes.
This value is repeated here from the
MPLS-TE-STD-MIB MIB module because the tunnel entry will
reveal the bandwidth reserved by the signaling protocol,
which is typically 0 for backup tunnels so as to not
over-book bandwidth. However, internal reservations are
typically made on the PLR, thus this value should be
revealed here as it is often different from
mplsTunnelResourceMeanRate found in the MPLS-TE-STD-MIB
MIB module."
::= { mplsFrrFacilityDBEntry 11 }
-- Notifications
Nadeau, et al. Expires Feb 2009 [Page 38]
MPLS Fast-reroute MIB Aug 28, 2008
mplsFrrFacilityInitialBkupTunnelInvoked NOTIFICATION-TYPE
OBJECTS { mplsFrrFacilityDBNumProtectingTunnelOnIf,
mplsFrrFacilityDBNumProtectedLspOnIf,
mplsFrrFacilityDBNumProtectedTunnels,
mplsFrrFacilityDBProtectingTunnelStatus,
mplsFrrFacilityDBProtectingTunnelResvBw
}
STATUS current
DESCRIPTION
"This notification is generated when a tunnel running over an
interface as specified in the mplsFrrConstraintsTable is
initially protected by the backup tunnel also specified in the
mplsFrrConstraintsTable. In some implementations there may be
a difference between when the control plane triggers
this notification and when the hardware is programmed to
utilize the protection path. Due to the urgency of this
operation, it is acceptable for the control plane to
either issue this notification before or after it programs
the hardware. In cases where it is the latter approach,
the notification MUST be sent immediately after the
data plane has been altered.
This notification should not be generated
for each subsequent tunnel that is backed up by the FRR feature
on this LSR, as this may result in potential scaling issues
with regard to LSR performance and network load. Note also
that notifications MUST be generated in accordance with the
mplsFrrNotificationsMaxRate.
Note this notification is only applicable to the facility based
fastreroute protection method, and should be ignored by
implementations that do not support this method."
::= { mplsFrrFacilityNotifications 1 }
mplsFrrFacilityFinalTunnelRestored NOTIFICATION-TYPE
OBJECTS { mplsFrrFacilityDBNumProtectingTunnelOnIf,
mplsFrrFacilityDBNumProtectedLspOnIf,
mplsFrrFacilityDBNumProtectedTunnels,
mplsFrrFacilityDBProtectingTunnelStatus,
mplsFrrFacilityDBProtectingTunnelResvBw
}
STATUS current
DESCRIPTION
"This notification is generated when the final tunnel that is
being protected by a backup tunnel as specified in the
mplsFrrConstraintsTable is restored to normal operation. This
notification should not be generated for each restored tunnel,
Nadeau, et al. Expires Feb 2009 [Page 39]
MPLS Fast-reroute MIB Aug 28, 2008
as this may result in potential scaling issues with regard to
LSR performance and network load. Note also that
notifications MUST be generated in accordance with the
mplsFrrNotificationsMaxRate."
::= { mplsFrrFacilityNotifications 2 }
-- Module Conformance Statement
mplsFrrFacilityGroups
OBJECT IDENTIFIER ::= {mplsFrrFacilityConformance 1 }
mplsFrrFacilityCompliances
OBJECT IDENTIFIER ::= {mplsFrrFacilityConformance 2 }
mplsFrrFacilityModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statements for agents that support the
MPLS-FRR-FACILITY-STD-MIB MIB module."
MODULE MPLS-FRR-GENERAL-STD-MIB -- MPLS FRR Generic MIB
MANDATORY-GROUPS {
mplsFrrGeneralScalarGroup,
mplsFrrGeneralTunnelARHopGroup,
mplsFrrGeneralConstraintsGroup
}
MODULE -- this module
MANDATORY-GROUPS {
mplsFrrFacilityDBGroup,
mplsFrrFacilityNotificationsGroup
}
::= { mplsFrrFacilityCompliances 1 }
mplsFrrFacilityModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statements for agents that support the MPLS FRR
MIB."
MODULE
MANDATORY-GROUPS {
mplsFrrFacilityScalarGroup,
mplsFrrFacilityDBGroup,
mplsFrrFacilityNotificationsGroup
}
::= { mplsFrrFacilityCompliances 2 }
Nadeau, et al. Expires Feb 2009 [Page 40]
MPLS Fast-reroute MIB Aug 28, 2008
-- Units of conformance
mplsFrrFacilityScalarGroup OBJECT-GROUP
OBJECTS { mplsFrrConfiguredInterfaces,
mplsFrrActiveInterfaces,
mplsFrrConfiguredBypassTunnels,
mplsFrrActiveBypassTunnels,
mplsFrrFacilityNotificationsEnabled,
mplsFrrFacilityNotificationsMaxRate
}
STATUS current
DESCRIPTION
"Objects that are required to represent the FRR
Facility Route Database information."
::= { mplsFrrFacilityGroups 1 }
mplsFrrFacilityDBGroup OBJECT-GROUP
OBJECTS { mplsFrrFacilityDBNumProtectingTunnelOnIf,
mplsFrrFacilityDBNumProtectedLspOnIf,
mplsFrrFacilityDBNumProtectedTunnels,
mplsFrrFacilityDBProtectingTunnelStatus,
mplsFrrFacilityDBProtectingTunnelResvBw
}
STATUS current
DESCRIPTION
"Objects that are required to represent the FRR
Facility Route Database information."
::= { mplsFrrFacilityGroups 2 }
mplsFrrFacilityNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { mplsFrrFacilityInitialBkupTunnelInvoked,
mplsFrrFacilityFinalTunnelRestored
}
STATUS current
DESCRIPTION
"Objects that are required to represent FRR notifications."
::= { mplsFrrFacilityGroups 3 }
END
-- End of MPLS-FRR-FACILITY-STD-MIB
7. Security Considerations
It is clear that these MIB modules are potentially useful for
Nadeau, et al. Expires Feb 2009 [Page 41]
MPLS Fast-reroute MIB Aug 28, 2008
monitoring of MPLS LSRs supporting fast reroute. This
MIB module can also be used for configuration of certain objects,
and anything that can be configured can be incorrectly configured,
with potentially disastrous results.
There are a number of management objects defined in these MIB
modules with a MAX-ACCESS clause of read-write and/or read-create.
Such objects may be considered sensitive or vulnerable in some
network environments. The support for SET operations in a
non-secure environment without proper protection can have a
negative effect on network operations. These are the tables and
objects and their sensitivity/vulnerability:
o the mplsFrrGeneralConstraintsTable and some objects in the
mplsFrrScalarGroup contain objects which may be used
to provision MPLS fast reroute features. Unauthorized
access to these objects could result in disruption of
traffic on the network. This is especially true if the
objects in question refer to previously provisioned protection
tunnels and configuration. The use of stronger
mechanisms such as SNMPv3 security should be considered where
possible. Specifically, SNMPv3 VACM and USM MUST be used with
any v3 agent which implements this MIB module. Administrators
should consider whether read access to these objects should
be allowed, since read access may be undesirable under certain
circumstances.
Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and objects and their
sensitivity/vulnerability:
o the mplsFrrOne2OnePlrTable, mplsFrrOne2OneDetourTable, and
mplsFrrTunnelARHopTable tables and some objects
contained in the mplsFrrScalarGroup
collectively show the MPLS fast reroute interfaces, tunnels,
and other associated fast reroute feature configurations
as well as their linkages to other MPLS-related
configuration and/or performance statistics.
Administrators not wishing to reveal this information should
consider these objects sensitive/vulnerable and take
precautions so they are not revealed.
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPSec),
Nadeau, et al. Expires Feb 2009 [Page 42]
MPLS Fast-reroute MIB Aug 28, 2008
even then, there is no control as to who on the secure network is
allowed to access and GET/SET (read/change/create/delete) the objects
in this MIB module.
It is RECOMMENDED that implementers consider the security features as
provided by the SNMPv3 framework (see [RFC3410], section 8),
including full support for the SNMPv3 cryptographic mechanisms (for
authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module, is properly configured to give access
to the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them.
8. IANA Considerations
As described in the MPLS-TC-STD-MIB [RFC3811] MIB module, MPLS
related standards track MIB modules should be rooted under the
mplsStdMIB subtree. There is one MPLS-related
MIB module contained in this document. The following "IANA
Considerations" subsection requests IANA for a new assignment under
the mplsStdMIB subtree. New assignments can only be made via a
Standards Action as specified in [RFC5226].
8.1. IANA Considerations for MPLS-FRR-GENERAL-STD-MIB
The IANA is requested to assign { mplsStdMIB 12 } to the
MPLS-FRR-GENERAL-STD-MIB MIB module specified in this document.
8.2. IANA Considerations for MPLS-FRR-ONE2ONE-STD-MIB
The IANA is requested to assign { mplsStdMIB 13 } to the
MPLS-FRR-ONE2ONE-STD-MIB MIB module specified in this document.
8.3. IANA Considerations for MPLS-FRR-FACILITY-STD-MIB
The IANA is requested to assign { mplsStdMIB 14 } to the
MPLS-FRR-FACILITY-STD-MIB MIB module specified in this document.
9. Acknowledgments
This document is a product of the MPLS Working Group.
We would like to thank Alia Atlas, Yeong Tai, Walter Vanhimbeeck,
Mike Piecuch, Adrien Grise, Kiran Koushik, and Adrian Farrel for
the helpful and colorful discussions about, editorial comments on
Nadeau, et al. Expires Feb 2009 [Page 43]
MPLS Fast-reroute MIB Aug 28, 2008
and contributions to this document.
10. References
10.1 Normative References
[RFC2119] S. Bradner, "Key Words for use in RFCs to Indicate
Requirement Levels", RFC 2119, BCP 14, March 1997.
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
J., Rose, M., and S. Waldbusser, "Structure of
Management Information Version 2 (SMIv2)", STD 58, RFC
2578, April 1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
J., Rose, M., and S. Waldbusser, "Textual Conventions
for SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
J., Rose, M., and S. Waldbusser, "Conformance
Statements for SMIv2", STD 58, RFC 2580, April 1999.
[RFC2863] McCloghrie, K. and F. Kastenholtz, "The Interfaces Group
MIB", RFC 2863, June 2000.
[RFC3031] Rosen, E., Viswanathan, A., and R. Callon, "Multiprotocol
Label Switching Architecture", RFC 3031, January 2001.
[RFC3811] Nadeau, T. and J. Cucchiara, "Definition of Textual
Conventions and for Multiprotocol Label Switching (MPLS)
Management", RFC 3811, June 2004.
[RFC3812] Srinivasan, C., Viswanathan, A. and T. Nadeau,
"Multiprotocol Label Switching (MPLS) Traffic
Engineering Management Information
Base", RFC 3812, June 2004
[RFC3813] Srinivasan, C., Viswanathan, A. and Nadeau, T.,
"Multiprotocol Label Switching (MPLS) Label Switching
Router (LSR) Management Information Base",
RFC 3813, June 2004
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
Schoenwaelder, "Textual Conventions for Internet Network
Addresses", RFC 4001, Feb 2005.
[RFC4090] Pan, P., Swallow, G., and A. Atlas, "Fast Reroute
Extensions to RSVP-TE for LSP Tunnels", RFC 4090,
May 2005.
Nadeau, et al. Expires Feb 2009 [Page 44]
MPLS Fast-reroute MIB Aug 28, 2008
[RFC5226] Narten, T. and H. Alvestrand., "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 5226,
May 2008.
10.2 Informative References
[RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart,
"Introduction and Applicability Statements for
Internet-Standard Management Framework", RFC 3410,
December 2002.
[RFC4990] Shiomoto K., Papneja R., Rabbat R.," Use of Addresses
in Generalized Multi-Protocol Label Switching (GMPLS)
Networks", RFC 4990, Sep 2007.
11. Editors' Addresses
Riza Cetin
Alcatel
Francis Wellesplein 1
B-2018 Antwerp, Belgium
Email: riza.cetin@alcatel.be
Thomas D. Nadeau
BT
BT Centre
81 Newgate Street
EC1A 7AJ
London
Email: tom.nadeau@bt.com
A S Kiran Koushik
Cisco Systems, Inc.
12515 Research Blvd, Bldg 4
Austin, TX 78664
Phone: +1-512-378-1482
Email: kkoushik@cisco.com
12. Contributors' Addresses
Stefaan De Cnodder
Alcatel
Francis Wellesplein 1
B-2018 Antwerp, Belgium
Email: stefaan.de_cnodder@alcatel.be
Nadeau, et al. Expires Feb 2009 [Page 45]
MPLS Fast-reroute MIB Aug 28, 2008
Der-Hwa Gan
Juniper Networks, Inc.
1194 N. Mathilda Avenue
Sunnyvale, CA 94089
Email: dhg@juniper.net
Full Copyright Statement
Copyright (C) The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgement
Nadeau, et al. Expires Feb 2009 [Page 46]
MPLS Fast-reroute MIB Aug 28, 2008
This document is a product of the MPLS Working Group.
Funding for the RFC Editor function is provided by the IETF
Administrative Support Activity (IASA).
Nadeau, et al. Expires Feb 2009 [Page 47]