SACM Working Group H. Birkholz
Internet-Draft Fraunhofer SIT
Intended status: Standards Track J. Fitzgerald-McKay
Expires: December 26, 2019 Department of Defense
C. Schmidt
The MITRE Corporation
D. Waltermire
NIST
June 24, 2019
Concise Software Identification Tags
draft-ietf-sacm-coswid-10
Abstract
This document defines a concise representation of ISO/IEC
19770-2:2015 Software Identification (SWID) tags that are
interoperable with the XML schema definition of ISO/IEC 19770-2:2015.
Next to the inherent capability of SWID tags to express arbitrary
context information, Concise SWID (CoSWID) tags support the
definition of additional semantics via well-defined data definitions
incorporated by extension points.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on December 26, 2019.
Copyright Notice
Copyright (c) 2019 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
Birkholz, et al. Expires December 26, 2019 [Page 1]
Internet-Draft CoSWID June 2019
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. The SWID and CoSWID Tag Lifecycle . . . . . . . . . . . . 4
1.2. Concise SWID Format . . . . . . . . . . . . . . . . . . . 6
1.3. Requirements Notation . . . . . . . . . . . . . . . . . . 7
2. Concise SWID Data Definition . . . . . . . . . . . . . . . . 7
2.1. Concise SWID Extensions . . . . . . . . . . . . . . . . . 8
2.2. The concise-swid-tag Group . . . . . . . . . . . . . . . 9
2.3. concise-swid-tag Co-constraints . . . . . . . . . . . . . 13
2.4. The global-attributes Group . . . . . . . . . . . . . . . 14
2.5. The entity-entry Group . . . . . . . . . . . . . . . . . 15
2.6. The link-entry Map . . . . . . . . . . . . . . . . . . . 17
2.7. The software-meta-entry Map . . . . . . . . . . . . . . . 21
2.8. The Resource Collection Definition . . . . . . . . . . . 24
2.8.1. The hash-entry Array . . . . . . . . . . . . . . . . 24
2.8.2. The resource-collection Group . . . . . . . . . . . . 24
2.8.3. The payload-entry Group . . . . . . . . . . . . . . . 27
2.8.4. The evidence-entry Group . . . . . . . . . . . . . . 28
2.9. Full CDDL Definition . . . . . . . . . . . . . . . . . . 28
3. Determining the Type of CoSWID . . . . . . . . . . . . . . . 34
4. CoSWID Indexed Label Values . . . . . . . . . . . . . . . . . 34
4.1. Version Scheme . . . . . . . . . . . . . . . . . . . . . 34
4.2. Entity Role Values . . . . . . . . . . . . . . . . . . . 35
4.3. Link Ownership Values . . . . . . . . . . . . . . . . . . 36
4.4. Link Rel Values . . . . . . . . . . . . . . . . . . . . . 37
4.5. Link Use Values . . . . . . . . . . . . . . . . . . . . . 39
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 39
5.1. CoSWID Items Registry . . . . . . . . . . . . . . . . . . 39
5.2. SWID/CoSWID Value Registries . . . . . . . . . . . . . . 42
5.2.1. SWID/CoSWID Version Scheme Value Registry . . . . . . 43
5.2.2. SWID/CoSWID Entity Role Value Registry . . . . . . . 44
5.2.3. SWID/CoSWID Link Ownership Value Registry . . . . . . 45
5.2.4. SWID/CoSWID Link Relationship Value Registry . . . . 46
5.2.5. SWID/CoSWID Link Use Value Registry . . . . . . . . . 47
5.3. swid+cbor Media Type Registration . . . . . . . . . . . . 48
5.4. CoAP Content-Format Registration . . . . . . . . . . . . 49
5.5. CBOR Tag Registration . . . . . . . . . . . . . . . . . . 50
6. Security Considerations . . . . . . . . . . . . . . . . . . . 50
7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 52
Birkholz, et al. Expires December 26, 2019 [Page 2]
Internet-Draft CoSWID June 2019
8. Change Log . . . . . . . . . . . . . . . . . . . . . . . . . 52
9. Contributors . . . . . . . . . . . . . . . . . . . . . . . . 55
10. References . . . . . . . . . . . . . . . . . . . . . . . . . 56
10.1. Normative References . . . . . . . . . . . . . . . . . . 56
10.2. Informative References . . . . . . . . . . . . . . . . . 57
Appendix A. Signed Concise SWID Tags using COSE . . . . . . . . 58
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 59
1. Introduction
SWID tags have several use-applications including but not limited to:
o Software Inventory Management, a part of a Software Asset
Management [SAM] process, which requires an accurate list of
discernible deployed software components.
o Vulnerability Assessment, which requires a semantic link between
standardized vulnerability descriptions and software components
installed on IT-assets [X.1520].
o Remote Attestation, which requires a link between reference
integrity measurements (RIM) and security logs of measured
software components [I-D.birkholz-rats-tuda].
SWID tags, as defined in ISO-19770-2:2015 [SWID], provide a
standardized XML-based record format that identifies and describes a
specific release of a software component. Different software
components, and even different releases of a particular software
component, each have a different SWID tag record associated with
them. SWID tags are meant to be flexible and able to express a broad
set of metadata about a software component.
While there are very few required fields in SWID tags, there are many
optional fields that support different use scenarios. A SWID tag
consisting of only required fields might be a few hundred bytes in
size; however, a tag containing many of the optional fields can be
many orders of magnitude larger. Thus, real-world instances of SWID
tags can be fairly large, and the communication of SWID tags in use-
applications, such as those described earlier, can cause a large
amount of data to be transported. This can be larger than acceptable
for constrained devices and networks. Concise SWID (CoSWID) tags
significantly reduce the amount of data transported as compared to a
typical SWID tag. This reduction is enabled through the use of CBOR,
which maps the human-readable labels of SWID data items to more
concise integer labels (indices). The use of CBOR to express SWID
information in CoSWID tags allows both CoSWID and SWID tags to be
part of an enterprise security solution for a wider range of
endpoints and environments.
Birkholz, et al. Expires December 26, 2019 [Page 3]
Internet-Draft CoSWID June 2019
1.1. The SWID and CoSWID Tag Lifecycle
In addition to defining the format of a SWID tag record, ISO/IEC
19770-2:2015 defines requirements concerning the SWID tag lifecycle.
Specifically, when a software component is installed on an endpoint,
that software component's SWID tag is also installed. Likewise, when
the software component is uninstalled or replaced, the SWID tag is
deleted or replaced, as appropriate. As a result, ISO/IEC
19770-2:2015 describes a system wherein there is a correspondence
between the set of installed software components on an endpoint, and
the presence of the corresponding SWID tags for these components on
that endpoint. CoSWIDs share the same lifecycle requirements as a
SWID tag.
The SWID specification and supporting guidance provided in NIST
Internal Report (NISTIR) 8060: Guidelines for the Creation of
Interoperable SWID Tags [SWID-GUIDANCE] defines four types of SWID
tags: primary, patch, corpus, and supplemental.
1. Primary Tag - A SWID or CoSWID tag that identifies and describes
a software component is installed on a computing device. A
primary tag is intended to be installed on an endpoint along with
the corresponding software component.
2. Patch Tag - A SWID or CoSWID tag that identifies and describes an
installed patch which has made incremental changes to a software
component installed on an endpoint. A patch tag is intended to
be installed on an endpoint along with the corresponding software
component patch.
3. Corpus Tag - A SWID or CoSWID tag that identifies and describes
an installable software component in its pre-installation state.
A corpus tag can be used to represent metadata about an
installation package or installer for a software component, a
software update, or a patch.
4. Supplemental Tag - A SWID or CoSWID tag that allows additional
information to be associated with a referenced SWID tag. This
helps to ensure that SWID Primary and Patch Tags provided by a
software provider are not modified by software management tools,
while allowing these tools to provide their own software
metadata.
The type of a tag is determined by specific data elements, which is
discussed in Section 3.
Corpus, primary, and patch tags have similar functions in that
they describe the existence and/or presence of different types of
Birkholz, et al. Expires December 26, 2019 [Page 4]
Internet-Draft CoSWID June 2019
software (e.g., software installers, software installations,
software patches), and, potentially, different states of software
components. In contrast, supplemental tags furnish additional
information not contained in corpus, primary, or patch tags. All
four tag types come into play at various points in the software
lifecycle, and support software management processes that depend
on the ability to accurately determine where each software
component is in its lifecycle.
+------------+
v |
Installation Product Product Product Product
Media -> Installed -> Patched -> Upgraded -> Removed
Deployed
Corpus Primary Primary xPrimary xPrimary
Supplemental Supplemental xSupplemental xSuplemental
Patch xPatch
Primary
Supplemental
Figure 1: Use of Tag Types in the Software Lifecycle
Figure 1 illustrates the steps in the software lifecycle and the
relationships among those lifecycle events supported by the four
types of SWID and CoSWID tags, as follows:
* Software Deployment. Before the software component is
installed (i.e., pre-installation), and while the product is
being deployed, a corpus tag provides information about the
installation files and distribution media (e.g., CD/DVD,
distribution package).
* Software Installation. A primary tag will be installed with
the software component (or subsequently created) to uniquely
identify and describe the software component. Supplemental
tags are created to augment primary tags with additional site-
specific or extended information. While not illustrated in the
figure, patch tags can also be installed during software
installation to provide information about software fixes
deployed along with the base software installation.
* Software Patching. When a new patch is applied to the software
component, a new patch tag is provided, supplying details about
the patch and its dependencies. While not illustrated in the
Birkholz, et al. Expires December 26, 2019 [Page 5]
Internet-Draft CoSWID June 2019
figure, a corpus tag can also provide information about the
patch installer, and patching dependencies that need to be
installed before the patch.
* Software Upgrading. As a software component is upgraded to a
new version, new primary and supplemental tags replace existing
tags, enabling timely and accurate tracking of updates to
software inventory. While not illustrated in the figure, a
corpus tag can also provide information about the upgrade
installer, and dependencies that need to be installed before
the upgrade.
* Software Removal. Upon removal of the software component,
relevant SWID tags are removed. This removal event can trigger
timely updates to software inventory reflecting the removal of
the product and any associated patch or supplemental tags.
Note: While not fully illustrated in the figure, supplemental tags
can be associated with any corpus, primary, or patch tag to provide
additional metadata about an installer, installed software, or
installed patch respectively.
Understanding the use of CoSWIDs in the software lifecycle provides a
basis for understanding the information provided in a CoSWID and the
associated semantics of this information. Each of the different SWID
and CoSWID tag types provide different sets of information. For
example, a "corpus tag" is used to describe a software component's
installation image on an installation media, while a "patch tag" is
meant to describe a patch that modifies some other software
component.
1.2. Concise SWID Format
This document defines the CoSWID tag format, a more concise
representation of SWID information in the Concise Binary Object
Representation (CBOR) [RFC7049]. The structure of a CoSWID is
described via the Concise Data Definition Language (CDDL) [RFC8610].
The resulting CoSWID data definition is aligned to the information
able to be expressed with the XML schema definition of ISO-
19770-2:2015 [SWID]. This alignment allows both SWID and CoSWID tags
to represent a common set of SWID information and to support all SWID
tag use cases. To achieve this end, the CDDL representation includes
every SWID tag field and attribute.
The vocabulary, i.e., the CDDL names of the types and members used in
the CoSWID data definition, are mapped to more concise labels
represented as small integer values. The names used in the CDDL data
definition and the mapping to the CBOR representation using integer
Birkholz, et al. Expires December 26, 2019 [Page 6]
Internet-Draft CoSWID June 2019
labels is based on the vocabulary of the XML attribute and element
names defined in ISO/IEC 19770-2:2015.
1.3. Requirements Notation
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
2. Concise SWID Data Definition
The following is a CDDL representation for a CoSWID tag. The
CamelCase [CamelCase] notation used in the XML schema definition is
changed to a hyphen-separated notation [KebabCase] (e.g.
ResourceCollection is named resource-collection) in the CoSWID data
definition. In essence, [KebabCase] "looks-like-this". This
deviation from the original notation used in the XML representation
reduces ambiguity when referencing certain attributes in
corresponding textual descriptions. An attribute referred to by its
name in CamelCase notation explicitly relates to XML SWID tags; an
attribute referred to by its name in KebabCase notation explicitly
relates to CoSWID tags. This approach simplifies the composition of
further work that reference both XML SWID and CoSWID documents.
Human-readable labels of members in CDDL map data definitions are
mapped to integer indices via a block of rules at the bottom of the
definition. The 57 character strings of the SWID vocabulary are
replacesm which would have to be stored or transported in full if
using the original vocabulary.
In CBOR, an array is encoded using bytes that identify the array, and
the array's length or stop point (see [RFC7049]). To make items that
support 1 or more values, the following CDDL notion is used.
_name_ = (_label_: _data_ / [ 2* _data_ ])
The CDDL rule above allows for a more efficient CBOR encoding of the
data when a single value is used. This is accomplished by avoiding
the need to first encode the array. Conversely, hen two or more
values are encoded, the bytes identifing the array are used. This
modeling pattern is used frequently in the CoSWID CDDL data
definition to allow for more effecient encoding of single values.
The following subsections describe the different parts of the CoSWID
model.
Birkholz, et al. Expires December 26, 2019 [Page 7]
Internet-Draft CoSWID June 2019
2.1. Concise SWID Extensions
The corresponding CoSWID data definition includes two kinds of
augmentation.
o The explicit definition of types for attributes that are typically
stored in the "any attribute" of an ISO-19770-2:2015 in XML
representation. These are covered in Section 2.4.
o The inclusion of extension points in the CoSWID data definition
using CDDL sockets (see [RFC8610] section 3.9). The use of CDDL
sockets allow for well-formed extensions to be defined in
supplementary CDDL descriptions that support additional uses of
CoSWID tags that go beyond the original scope of ISO-19770-2:2015
tags. This extension mechanism can also be used to update the
CoSWID format as revisions to ISO-19770-2 are published.
The following CDDL sockets (extension points) are defined in this
document, which allow the addition of new information structures to
their respective CDDL groups.
+---------------------+-----------------------+---------------+
| Map Name | CDDL Socket | Defined in |
+---------------------+-----------------------+---------------+
| concise-swid-tag | $$coswid-extension | Section 2.2 |
| | | |
| entity-entry | $$entity-extension | Section 2.5 |
| | | |
| link-entry | $$link-extension | Section 2.6 |
| | | |
| software-meta-entry | $$meta-extension | Section 2.7 |
| | | |
| file-entry | $$file-extension | Section 2.8.2 |
| | | |
| directory-entry | $$directory-extension | Section 2.8.2 |
| | | |
| process-entry | $$process-extension | Section 2.8.2 |
| | | |
| resource-entry | $$resource-extension | Section 2.8.2 |
| | | |
| payload-entry | $$payload-extension | Section 2.8.3 |
| | | |
| evidence-entry | $$evidence-extension | Section 2.8.4 |
+---------------------+-----------------------+---------------+
The CoSWID Items Registry defined in Section 5.1 provides a
registration mechanism allowing new items, and their associated index
values, to be added to the CoSWID model through the use of the CDDL
Birkholz, et al. Expires December 26, 2019 [Page 8]
Internet-Draft CoSWID June 2019
sockets described above. This registration mechanism provides for
well-known index values for data items in CoSWID extensions, allowing
these index values to be recognized by implementations supporting a
given extension.
The following CDDL sockets defined in this document allow for adding
new values to corresponding type-choices (i.e. to represent
enumerations) via custom CDDL data definitions.
+------------------+-----------------+-------------+
| Enumeration Name | CDDL Socket | Defined in |
+------------------+-----------------+-------------+
| version-scheme | $version-scheme | Section 4.1 |
| | | |
| role | $role | Section 4.2 |
| | | |
| ownership | $ownership | Section 4.3 |
| | | |
| rel | $rel | Section 4.4 |
| | | |
| use | $use | Section 4.5 |
+------------------+-----------------+-------------+
A number of SWID/CoSWID value registries are also defined in
Section 5.2 that allow new valid values to be registered with IANA
for the enumerations above. This registration mechanism supports the
definition of new well-known index values and names for new
enumeration values used by SWID and CoSWID. This registration
mechanism allows new standardized enumerated values to be shared
between both specifications (and implementations) over time.
2.2. The concise-swid-tag Group
The CDDL data definition for the root concise-swid-tag map is as
follows and this rule and its constraints MUST be followed when
creating or validating a CoSWID tag:
Birkholz, et al. Expires December 26, 2019 [Page 9]
Internet-Draft CoSWID June 2019
concise-swid-tag = {
global-attributes,
tag-id => text,
tag-version => integer,
? corpus => bool,
? patch => bool,
? supplemental => bool,
software-name => text,
? software-version => text,
? version-scheme => $version-scheme,
? media => text,
? software-meta => software-meta-entry / [ 2* software-meta-entry ],
entity => entity-entry / [ 2* entity-entry ],
? link => link-entry / [ 2* link-entry ],
? (( payload => payload-entry ) // ( evidence => evidence-entry )),
* $$coswid-extension
}
tag-id = 0
software-name = 1
entity = 2
evidence = 3
link = 4
software-meta = 5
payload = 6
corpus = 8
patch = 9
media = 10
supplemental = 11
tag-version = 12
software-version = 13
version-scheme = 14
$version-scheme /= multipartnumeric
$version-scheme /= multipartnumeric-suffix
$version-scheme /= alphanumeric
$version-scheme /= decimal
$version-scheme /= semver
$version-scheme /= uint / text
multipartnumeric = 1
multipartnumeric-suffix = 2
alphanumeric = 3
decimal = 4
semver = 16384
The following describes each member of the concise-swid-tag root map.
Birkholz, et al. Expires December 26, 2019 [Page 10]
Internet-Draft CoSWID June 2019
o global-attributes: A list of items including an optional language
definition to support the processing of text-string values and an
unbounded set of any-attribute items. Described in Section 2.4.
o tag-id (index 0): A textual identifier uniquely referencing a
(composite) software component. The tag identifier MUST be
globally unique. There are no strict guidelines on how this
identifier is structured, but examples include a 16 byte GUID
(e.g. class 4 UUID) [RFC4122], or a text string appended to a DNS
domain name to ensure uniqueness across organizations.
o tag-version (index 12): An integer value that indicate the
specific release revision of the tag. Typically, the initial
value of this field is set to 0, and the value is monotonically
increased for subsequent tags produced for the same software
component release. This value allows a CoSWID tag producer to
correct an incorrect tag previously released, without indicating a
change to the underlying software component the tag represents.
For example, the tag version would be changed to add new metadata,
to correct a broken link, to add a missing payload entry, etc.
When producing a revised tag, the new tag-version value MUST be
greater than the old tag-version value.
o corpus (index 8): A boolean value that indicates if the tag
identifies and describes an installable software component in its
pre-installation state. Installable software includes a
installation package or installer for a software component, a
software update, or a patch. If the CoSWID tag represents
installable software, the corpus item MUST be set to "true". If
not provided the default value MUST be considered "false".
o patch (index 9): A boolean value that indicates if the tag
identifies and describes an installed patch which has made
incremental changes to a software component installed on a
computing device. Typically, an installed patch has made a set of
file modifications to pre-installed software, and does not alter
the version number or the descriptive metadata of an installed
software component. If a CoSWID tag is for a patch, the patch
item MUST be set to "true". If not provided the default value
MUST be considered "false".
o supplemental (index 11): A boolean value that indicates if the tag
is providing additional information to be associated with another
referenced SWID or CoSWID tag. Tags using this item help to
ensure that primary and patch tags provided by a software provider
are not modified by software management tools, while allowing
these tools to provide their own software metadata for a software
component. If a CoSWID tag is a supplemental tag, the
Birkholz, et al. Expires December 26, 2019 [Page 11]
Internet-Draft CoSWID June 2019
supplemental item MUST be set to "true". If not provided the
default value MUST be considered "false".
o software-name (index 1): This textual item provides the software
component's name. This name is likely the same name that would
appear in a package management tool.
o software-version (index 13): A textual value representing the
specific release or development version of the software component.
o version-scheme (index 14): An 8-bit integer or textual value
representing the versioning scheme used for the software-version
item. If an integer value is used it MUST be a value from the
SWID/CoSWID Version Scheme Value Registry (see section
Section 5.2.1 or a value in the private use range: 32768-65535.
An initial set of pre-defined version-scheme index and text values
are defined in Section 4.1 that are based on the version-scheme
values defined in [SWID]. These pre-defined version-scheme values
are registered with IANA in the "SWID/CoSWID Version Scheme Value"
registry Section 5.2.1, and MAY be expanded in the future.
The value of an ownership item MUST be one of the following:
* The index (preferred) or string value of a role from the IANA
in the "SWID/CoSWID Version Scheme Value" registry.
* An index value in the range 32768 through 65535, to indicate
that a private use index value is used.
* A string value prefixed with "x_", to indicate that a private
use string value is used.
o media (index 10): This text value is a hint to the tag consumer to
understand what this tag applies to. This item represents a query
as defined by the W3C Media Queries Recommendation (see
[W3C.REC-css3-mediaqueries-20120619]).
o software-meta (index 5): An open-ended map of key/value data
pairs. A number of predefined keys can be used within this item
providing for common usage and semantics across the industry. Use
of this map allows any additional attribute to be included in the
tag. It is expected that industry groups will use a common set of
attribute names to allow for interoperability within their
communities. Described in Section 2.7.
o entity (index 2): Provides information about one or more
organizations responsible for producing the CoSWID tag, and
Birkholz, et al. Expires December 26, 2019 [Page 12]
Internet-Draft CoSWID June 2019
producing or releasing the software component referenced by this
CoSWID tag. Described in Section 2.5.
o link (index 4): Provides a means to establish relationship arcs
between the tag and another items. A given link can be used to
establish the relationship between tags or to reference another
resource that is related to the CoSWID tag, e.g. vulnerability
database association, ROLIE feed [RFC8322], MUD resource
[RFC8520], software download location, etc). This is modeled
after the HTML "link" element. Described in Section 2.6.
o payload (index 6): This item represents the software artifacts
that compose the target software. For example, the files included
with an installer for a corpus tag or installed on an endpoint
when the software component is installed for a primary or patch
tag. The artifacts listed in a payload may be a superset of the
software artifacts that are actually installed. Based on user
selections at install time, an installation might not include
every artifact that could be created or executed on the endpoint
when the software component is installed or run. Described in
Section 2.8.3.
o evidence-entry (index 3): This item records the results of a
software discovery process used to identify untagged software on
an endpoint. This item provides a means to represent indicators
for why software is believed to be installed on the endpoint. In
such a case, a CoSWID tag is created when the endpoint is scanned
by the tool performing the scan. Described in Section 2.8.4.
o $$coswid-extension: This CDDL socket is used to add new
information structures to the concise-swid-tag root map. See
Section 2.1.
2.3. concise-swid-tag Co-constraints
The following co-constraints apply to the information provided by in
the concise-swid-tag group.
o The patch and supplemental items MUST NOT both be set to "true".
o If the patch item is set to "true", the tag SHOULD contain at
least one link item with the rel(ation) item value of "patches"
and an href item specifying an association with the software that
was patched.
o If the supplemental item is set to "true", the tag SHOULD contain
at least one link item with the rel(ation) item value of
Birkholz, et al. Expires December 26, 2019 [Page 13]
Internet-Draft CoSWID June 2019
"supplements" and an href item specifying an association with the
software that is supplemented.
o If all of the corpus, patch, and supplemental items are "false",
or if the corpus item is set to "true", then a software-version
item MUST be included with a value set to the version of the
software component. This ensures that primary and corpus tags
have an identifiable software version.
2.4. The global-attributes Group
The global-attributes group provides a list of items including an
optional language definition to support the processing of text-string
values and an unbounded set of any-attribute items allowing for
additional items to be provided as a general point of extension in
the model.
The CDDL for the global-attributes follows:
global-attributes = (
? lang,
* any-attribute,
)
any-attribute = (
label => text / int / [ 2* text ] / [ 2* int ]
)
label = text / int
The following describes each child item of this group.
o lang (index 15): A textual language tag that conforms with IANA
"Language Subtag Registry" [RFC5646]. The context of the
specified language applies to all sibling and descendant textual
values, unless a descendant object has defined a different
language tag. Thus, a new context is established when a
descendant object redefines a new language tag. All textual
values within a given context MUST be considered expressed in the
specified language.
o any-attribute: This sub-group provides a means to include
arbitrary information via label ("key") value pairs. Labels can
be either a single integer or text string. Values can be either a
single integer or text string, or an array of integers or text
strings.
Birkholz, et al. Expires December 26, 2019 [Page 14]
Internet-Draft CoSWID June 2019
2.5. The entity-entry Group
The CDDL for the entity-entry group follows:
entity-entry = {
global-attributes,
entity-name => text,
? reg-id => any-uri,
role => $role / [ 2* $role ],
? thumbprint => hash-entry,
* $$entity-extension,
}
entity-name = 31
reg-id = 32
role = 33
thumbprint = 34
$role /= tag-creator
$role /= software-creator
$role /= aggregator
$role /= distributor
$role /= licensor
$role /= uint / text
tag-creator=1
software-creator=2
aggregator=3
distributor=4
licensor=5
The following describes each child item of this group.
o global-attributes: The global-attributes group described in
Section 2.4.
o entity-name (index 32): The textual name of the organizational
entity claiming the roles specified by the role item for the
CoSWID tag.
o reg-id (index 32): The registration id value is intended to
uniquely identify a naming authority in a given scope (e.g.
global, organization, vendor, customer, administrative domain,
etc.) for the referenced entity. The value of an registration ID
MUST be a RFC 3986 URI. The scope SHOULD be the scope of an
organization. In a given scope, the registration id MUST be used
consistently for CoSWID tag production.
o role (index 33): The relationship(s) between the entity, and this
tag or the referenced software component. Use of index values
Birkholz, et al. Expires December 26, 2019 [Page 15]
Internet-Draft CoSWID June 2019
instead of text for these pre-defined roles allows a CoSWID to be
more concise.
An initial set of pre-defined role index and text values are
defined in Section 4.2 that are based on the roles defined in
[SWID]. These pre-defined roles are registered with IANA in the
"SWID/CoSWID Entity Role Value" registry Section 5.2.2, and MAY be
expanded in the future.
The value of a role item MUST be one of the following:
* The index (preferred) or string value of a role from the IANA
in the "SWID/CoSWID Entity Role Value" registry.
* An index value in the range 128 through 255, to indicate that a
private use index value is used.
* A string value prefixed with "x_", to indicate that a private
use string value is used.
The following additional requirements exist for the use of the
"role" item:
* An entity item MUST be provided with the role of "tag-creator"
for every CoSWID tag. This indicates the organization that
created the CoSWID tag.
* An entity item SHOULD be provided with the role of "software-
creator" for every CoSWID tag, if this information is known to
the tag creator. This indicates the organization that created
the referenced software component.
o thumbprint (index 34): The value of the thumbprint item provides
an integer-based hash algorithm identifier (hash-alg-id) and a
byte string value (hash-value) that contains the corresponding
hash value (i.e. the thumbprint) of the signing entity's public
key certificate. This provides an indicator of which entity
signed the CoSWID tag, which will typically be the tag creator.
If the hash-alg-id is not known, then the integer value "0" MUST
be used. This ensures parity between the SWID tag specification
[SWID], which does not allow an algorithm to be identified for
this field. See Section 2.8.1 for more details on the use of the
hash-entry data structure.
o $$entity-extension: This CDDL socket can be used to extend the
entity-entry group model. See Section 2.1.
Birkholz, et al. Expires December 26, 2019 [Page 16]
Internet-Draft CoSWID June 2019
2.6. The link-entry Map
The CDDL for the link-entry map follows:
link-entry = {
global-attributes,
? artifact => text,
href => any-uri,
? media => text,
? ownership => $ownership,
rel => $rel,
? media-type => text,
? use => $use,
* $$link-extension,
}
media = 10
artifact = 37
href = 38
ownership = 39
rel = 40
media-type = 41
use = 42
$ownership /= shared
$ownership /= private
$ownership /= abandon
$ownership /= uint / text
shared=1
private=2
abandon=3
$rel /= ancestor
$rel /= component
$rel /= feature
$rel /= installationmedia
$rel /= packageinstaller
$rel /= parent
$rel /= patches
$rel /= requires
$rel /= see-also
$rel /= supersedes
$rel /= supplemental
$rel /= uint / text
ancestor=1
component=2
feature=3
installationmedia=4
packageinstaller=5
Birkholz, et al. Expires December 26, 2019 [Page 17]
Internet-Draft CoSWID June 2019
parent=6
patches=7
requires=8
see-also=9
supersedes=10
supplemental=11
$use /= optional
$use /= required
$use /= recommended
$use /= uint / text
optional=1
required=2
recommended=3
The following describes each member of this map.
o global-attributes: The global-attributes group described in
Section 2.4.
o artifact (index: 37): To be used with rel="installation-media",
this item value can provide the path to the installer executable
or script that can be run to launch the referenced installation.
Links with the same artifact name MUST be considered mirrors of
each other, allowing the installation media to be acquired from
any of the described sources.
o href (index 38): A URI for the referenced resource. The "href"
item's value can be, but is not limited to, the following (which
is a slightly modified excerpt from [SWID]):
* If no URI scheme is provided, then the URI is to be interpreted
as being relative to the URI of the CoSWID tag. For example,
"./folder/supplemental.coswid".
* a physical resource location with any acceptable URI scheme
(e.g., file:// http:// https:// ftp://)
* a URI with "coswid:" as the scheme, which refers to another
CoSWID by tag-id. This URI would need to be resolved in the
context of the endpoint by software that can lookup other
CoSWID tags. For example, "coswid:2df9de35-0aff-
4a86-ace6-f7dddd1ade4c" references the tag with the tag-id
value "2df9de35-0aff-4a86-ace6-f7dddd1ade4c".
* a URI with "swidpath:" as the scheme, which refers to another
CoSIWD via an XPATH query. This URI would need to be resolved
in the context of the system entity via software components
Birkholz, et al. Expires December 26, 2019 [Page 18]
Internet-Draft CoSWID June 2019
that can lookup other CoSWID tags and select the appropriate
tag based on an XPATH query [W3C.REC-xpath20-20101214].
Examples include:
* swidpath://SoftwareIdentity[Entity/@regid='http://contoso.com']
would retrieve all CoSWID tags that include an entity where the
regid is "Contoso" or swidpath://SoftwareIdentity[Meta/@persist
entId='b0c55172-38e9-4e36-be86-92206ad8eddb'] would match
CoSWID tags with the persistent-id value
"b0c55172-38e9-4e36-be86-92206ad8eddb".
o media (index 10): A hint to the consumer of the link to what the
target item is applicable for. This item represents a query as
defined by the W3C Media Queries Recommendation (see
[W3C.REC-css3-mediaqueries-20120619]). See also media defined in
Section 2.2.
o ownership (index 39): Used when the "href" item references another
software component to indicate the degree of ownership between the
software component referenced by the COSWID tag and the software
component referenced by the link.
An initial set of pre-defined ownership index and text values are
defined in Section 4.3 that are based on the ownership values
defined in [SWID]. These pre-defined ownership values are
registered with IANA in the "SWID/CoSWID Link Ownership Value"
registry Section 5.2.3, and MAY be expanded in the future.
The value of an ownership item MUST be one of the following:
* The index (preferred) or string value of a role from the IANA
in the "SWID/CoSWID Link Ownership Value" registry.
* An index value in the range 128 through 255, to indicate that a
private use index value is used.
* A string value prefixed with "x_", to indicate that a private
use string value is used.
o rel (index 40): Identifies the relationship between this CoSWID
and the target resource indicated by the "href" item.
An initial set of pre-defined rel index and text values are
defined in Section 4.4 that are based on the rel values defined in
[SWID]. These pre-defined rel values are registered with IANA in
the "SWID/CoSWID Link Relationship Value" registry Section 5.2.4,
and MAY be expanded in the future.
Birkholz, et al. Expires December 26, 2019 [Page 19]
Internet-Draft CoSWID June 2019
The value of a rel item MUST be one of the following:
* The index (preferred) or string value of a role from the IANA
in the "SWID/CoSWID Link Relationship Value" registry.
* An index value in the range 128 through 255, to indicate that a
private use index value is used.
* A string value prefixed with "x_", to indicate that a private
use string value is used.
* A string value, as defined by [RFC8288], corresponding to a
"Relation Name" from the IANA "Link Relation Types" registry:
https://www.iana.org/assignments/link-relations/link-
relations.xhtml. When a string value defined in the IANA
"SWID/CoSWID Link Relationship Value" registry matches a
Relation Name defined in the IANA "Link Relation Types"
registry, the value in the IANA "SWID/CoSWID Link Relationship
Value" registry MUST be used instead, as this relationship has
a specialized meaning in the context of a SWID/CoSWID tag.
o media-type (index 41): The media type for the target resource,
providing a resource consumer with a hint of what type of resource
to expect. Media types are identified by referencing a "Name"
from the IANA "Media Types" registry:
http://www.iana.org/assignments/media-types/media-types.xhtml.
o use (index 42): Determines if the referenced software component
has to be installed before installing the tagged software
component.
An initial set of pre-defined use index and text values are
defined in Section 4.5 that are based on the use values defined in
[SWID]. These pre-defined use values are registered with IANA in
the "SWID/CoSWID Link Use Value" registry Section 5.2.5, and MAY
be expanded in the future.
The value of an ownership item MUST be one of the following:
* The index (preferred) or string value of a role from the IANA
in the "SWID/CoSWID Link Use Value" registry.
* An index value in the range 128 through 255, to indicate that a
private use index value is used.
* A string value prefixed with "x_", to indicate that a private
use string value is used.
Birkholz, et al. Expires December 26, 2019 [Page 20]
Internet-Draft CoSWID June 2019
o $$link-extension: This CDDL socket can be used to extend the link-
entry map model. See Section 2.1.
2.7. The software-meta-entry Map
The CDDL for the software-meta-entry map follows:
software-meta-entry = {
global-attributes,
? activation-status => text,
? channel-type => text,
? colloquial-version => text,
? description => text,
? edition => text,
? entitlement-data-required => bool,
? entitlement-key => text,
? generator => text,
? persistent-id => text,
? product => text,
? product-family => text,
? revision => text,
? summary => text,
? unspsc-code => text,
? unspsc-version => text,
* $$meta-extension,
}
activation-status = 43
channel-type = 44
colloquial-version = 45
description = 46
edition = 47
entitlement-data-required = 48
entitlement-key = 49
generator = 50
persistent-id = 51
product = 52
product-family = 53
revision = 54
summary = 55
unspsc-code = 56
unspsc-version = 57
The following describes each child item of this group.
o global-attributes: The global-attributes group described in
Section 2.4.
Birkholz, et al. Expires December 26, 2019 [Page 21]
Internet-Draft CoSWID June 2019
o activation-status (index 43): A textual value that identifies how
the software component has been activated, which might relate to
specific terms and conditions for its use (e.g. Trial,
Serialized, Licensed, Unlicensed, etc) and relate to an
entitlement. This attribute is typically used in supplemental
tags as it contains information that might be selected during a
specific install.
o channel-type (index 44): A textual value that identfies which
sales, licensing, or marketing channel the software component has
been targeted for (e.g. Volume, Retail, OEM, Academic, etc).
This attribute is typically used in supplemental tags as it
contains information that might be selected during a specific
install.
o colloquial-version (index 45): A textual value for the software
component's informal or colloquial version. Examples may include
a year value, a major version number, or similar value that are
used to identify a group of specific software component releases
that are part of the same release/support cycle. This version can
be the same through multiple releases of a software component,
while the software-version specified in the concise-swid-tag group
is much more specific and will change for each software component
release. This version is intended to be used for string
comparison only, and is not intended to be used to determine if a
specific value is earlier or later in a sequence.
o description (index 46): A textual value that provides a detailed
description of the software component, which can be multiple
sentences.
o edition (index 47): A textual value indicating that the software
component represents a functional variation of the code base used
to support multiple software components. For examplem, this item
can be used to differentiate enterprise, standard, or professional
variants of a software component.
o entitlement-data-required (index 48): A boolean value that proof
of indicator to determine if accompanying proof of entitlement is
needed when a software license reconciliation process is
performed.
o entitlement-key (index 49): A vendor-specific textual key that can
be used to identify and establish a relationship to an
entitlement. Examples of an entitlement-key might include a
serial number, product key, or license key). For values that
relate to a given software component install (i.e., license key),
a supplemental tag will typically contain this information. In
Birkholz, et al. Expires December 26, 2019 [Page 22]
Internet-Draft CoSWID June 2019
other cases where a general-purpose key can be provided that
applies to all possible installs of the software component on
different endpoints, a primary tag will typically contain this
information.
o generator (index 50): The name (or tag-id) of the software
component that created the CoSWID tag. If the generating software
component has a SWID or CoSWID tag, then the tag-id for the
generating software component SHOULD be provided.
o persistent-id (index 51): A GUID used to identify a related set of
software components. Software components sharing the same
persistent-id can be different versions.
o product (index 52): A basic name for the software component that
can be common across multiple tagged software components (e.g.,
Apache HTTPD).
o product-family (index 53): A textual value indicating the software
components overall product family. This should be used when
multiple related software components form a larger capability that
is installed on multiple different endpoints. For example, some
software families may consist of server, client, and shared
service components that are part of a larger capability. Email
systems, enterprise applications, backup services, web
conferencing, and similar capabilities are examples of families.
o revision (index 54): A string value indicating an informal or
colloquial release version of the software. This value can
provide a different version value as compared to the software-
version specified in the concise-swid-tag group. This is useful
when one or more releases need to have an informal version label
that differs from the specific exact version value specified by
software-version. Examples can include SP1, RC1, Beta, etc.
o summary (index 55): A short description of the software component.
This MUST be a single sentence suitable for display in a user
interface.
o unspsc-code (index 56): An 8 digit UNSPSC classification code for
the software component. For more information see,
http://www.unspsc.org/.
o unspsc-version (index 57): The version of UNSPSC used to define
the unspsc-code value.
o $$meta-extension: This CDDL socket can be used to extend the
software-meta-entry group model. See Section 2.1.
Birkholz, et al. Expires December 26, 2019 [Page 23]
Internet-Draft CoSWID June 2019
2.8. The Resource Collection Definition
2.8.1. The hash-entry Array
CoSWID adds explicit support for the representation of hash entries
using algorithms that are registered in the IANA "Named Information
Hash Algorithm Registry" using the hash-entry member (label 58).
hash-entry = [ hash-alg-id: int, hash-value: bytes ]
The number used as a value for hash-alg-id MUST refer an ID in the
"Named Information Hash Algorithm Registry" (see
https://www.iana.org/assignments/named-information/named-
information.xhtml); other hash algorithms MUST NOT be used. The
hash-value MUST represent the raw hash value of the hashed resource
generated using the hash algorithm indicated by the hash-alg-id.
2.8.2. The resource-collection Group
A list of items both used in evidence (created by a software
discovery process) and payload (installed in an endpoint) content of
a CoSWID tag document to structure and differentiate the content of
specific CoSWID tag types. Potential content includes directories,
files, processes, or resources.
The CDDL for the resource-collection group follows:
resource-collection = (
? directory => directory-entry,
? file => file-entry,
? process => process-entry,
? resource => resource-entry,
)
filesystem-item = (
global-attributes,
? key => bool,
? location => text,
fs-name => text,
? root => text,
)
path-elements-entry = [ [ * file-entry ],
[ * directory-entry ],
]
file-entry = {
filesystem-item,
Birkholz, et al. Expires December 26, 2019 [Page 24]
Internet-Draft CoSWID June 2019
? size => integer,
? file-version => text,
? hash => hash-entry,
* $$file-extension
}
directory-entry = {
filesystem-item,
path-elements => path-elements-entry,
* $$directory-extension
}
process-entry = {
global-attributes,
process-name => text,
? pid => integer,
* $$process-extension
}
resource-entry = {
global-attributes,
type => text,
* $$resource-extension
}
directory = 16
file = 17
process = 18
resource = 19
size = 20
file-version = 21
key = 22
location = 23
fs-name = 24
root = 25
path-elements = 26
process-name = 27
pid = 28
type = 29
The following describes each member of the groups and maps
illustrated above.
o filesystem-item: A list of items both used in representing the
nodes of a file-system hierarchy (i.e., directory items that allow
one or more directories to be defined in the file structure), and
file items that allow one or more files to be specified for a
given location.
Birkholz, et al. Expires December 26, 2019 [Page 25]
Internet-Draft CoSWID June 2019
o global-attributes: The global-attributes group described in
Section 2.4.
o directory (index 16): A directory item allows child directory and
file items to be defined within a directory hierarchy for the
software component.
o file (index 17): A file item allows details about a file to be
provided for the software component.
o process (index 18): A process item allows details to be provided
about the runtime behavior of the software component, such as
information that will appear in a process listing on a device.
o resource (index 19): A resource item can be used to provide
details about a resource expected to be found on an endpoint, or
evidence collected related to the software component.
o size (index 20): The file's size in bytes.
o file-version (index 21): The file's version as reported by
querying information on the file from the operating system.
o key (index 22): A boolean value indicating if a file or directory
is significant or required for the software component to execute
or function properly. These are files or directories that can be
used to affirmatively determine if the software component is
installed on an endpoint.
o location (index 23): The filesystem path where a file is expected
to be located when installed or copied. This path SHOULD be
relative to the location of the parent directory item, or if no
parent is defined, the location MUST be relative to the location
of the CoSWID tag. The location MUST not include a file's name,
which is provided by the fs-name item.
o fs-name (index 24): The name of the directory or file without any
path information.
o root (index 25): A filesystem-specific name for the root of the
filesystem. The location item is considered relative to this
location if specified. If not provided, the value provided by the
location item is expected to be relative to its parent or the
location of the CoSWID tag if no parent is provided.
o path-elements (index 26): This group provides the ability to
define a directory structure for files defined in payload or
evidence items.
Birkholz, et al. Expires December 26, 2019 [Page 26]
Internet-Draft CoSWID June 2019
o process-name (index 27): The software component's process name as
it will appear in an endpoint's process list.
o pid (index 28): The process ID identified for a running instance
of the software component in the endpoint's process list. This is
used as part of the evidence item.
o type (index 29): A string indicating the type of resource.
o $$resource-collection-extension: This CDDL socket can be used to
extend the resource-collection group model. This can be used to
add new specialized types of resources. See Section 2.1.
o $$file-extension: This CDDL socket can be used to extend the file-
entry group model. See Section 2.1.
o $$directory-extension: This CDDL socket can be used to extend the
directory-entry group model. See Section 2.1.
o $$process-extension: This CDDL socket can be used to extend the
process-entry group model. See Section 2.1.
o $$resource-extension: This CDDL socket can be used to extend the
group model. See Section 2.1.
o $$-extension: This CDDL socket can be used to extend the resource-
entry group model. See Section 2.1.
2.8.3. The payload-entry Group
The CDDL for the payload-entry group follows:
payload-entry = {
global-attributes,
resource-collection,
* $$payload-extension
}
The following describes each child item of this group.
o global-attributes: The global-attributes group described in
Section 2.4.
o resource-collection: The resource-collection group described in
Section 2.8.2.
o $$payload-extension: This CDDL socket can be used to extend the
payload-entry group model. See Section 2.1.
Birkholz, et al. Expires December 26, 2019 [Page 27]
Internet-Draft CoSWID June 2019
2.8.4. The evidence-entry Group
The CDDL for the evidence-entry group follows:
evidence-entry = {
global-attributes,
resource-collection,
? date => time,
? device-id => text,
* $$evidence-extension
}
date = 35
device-id = 36
The following describes each child item of this group.
o global-attributes: The global-attributes group described in
Section 2.4.
o resource-collection: The resource-collection group described in
Section 2.8.2.
o date (index 35): The date and time the information was collected
pertaining to the evidence item.
o device-id (index 36): The endpoint's string identifier from which
the evidence was collected.
o $$evidence-extension: This CDDL socket can be used to extend the
evidence-entry group model. See Section 2.1.
2.9. Full CDDL Definition
In order to create a valid CoSWID document the structure of the
corresponding CBOR message MUST adhere to the following CDDL data
definition.
concise-swid-tag = {
global-attributes,
tag-id => text,
tag-version => integer,
? corpus => bool,
? patch => bool,
? supplemental => bool,
software-name => text,
? software-version => text,
? version-scheme => $version-scheme,
? media => text,
Birkholz, et al. Expires December 26, 2019 [Page 28]
Internet-Draft CoSWID June 2019
? software-meta => software-meta-entry / [ 2* software-meta-entry ],
entity => entity-entry / [ 2* entity-entry ],
? link => link-entry / [ 2* link-entry ],
? (( payload => payload-entry ) // ( evidence => evidence-entry )),
* $$coswid-extension
}
any-uri = text
label = text / int
$version-scheme /= multipartnumeric
$version-scheme /= multipartnumeric-suffix
$version-scheme /= alphanumeric
$version-scheme /= decimal
$version-scheme /= semver
$version-scheme /= uint / text
any-attribute = (
label => text / int / [ 2* text ] / [ 2* int ]
)
global-attributes = (
? lang => text,
* any-attribute,
)
hash-entry = [ hash-alg-id: int,
hash-value: bytes,
]
entity-entry = {
global-attributes,
entity-name => text,
? reg-id => any-uri,
role => $role / [ 2* $role ],
? thumbprint => hash-entry,
* $$entity-extension,
}
$role /= tag-creator
$role /= software-creator
$role /= aggregator
$role /= distributor
$role /= licensor
$role /= uint / text
link-entry = {
global-attributes,
Birkholz, et al. Expires December 26, 2019 [Page 29]
Internet-Draft CoSWID June 2019
? artifact => text,
href => any-uri,
? media => text,
? ownership => $ownership,
rel => $rel,
? media-type => text,
? use => $use,
* $$link-extension
}
$ownership /= shared
$ownership /= private
$ownership /= abandon
$ownership /= uint / text
$rel /= ancestor
$rel /= component
$rel /= feature
$rel /= installationmedia
$rel /= packageinstaller
$rel /= parent
$rel /= patches
$rel /= requires
$rel /= see-also
$rel /= supersedes
$rel /= supplemental
$rel /= uint / text
$use /= optional
$use /= required
$use /= recommended
$use /= uint / text
software-meta-entry = {
global-attributes,
? activation-status => text,
? channel-type => text,
? colloquial-version => text,
? description => text,
? edition => text,
? entitlement-data-required => bool,
? entitlement-key => text,
? generator => text,
? persistent-id => text,
? product => text,
? product-family => text,
? revision => text,
? summary => text,
Birkholz, et al. Expires December 26, 2019 [Page 30]
Internet-Draft CoSWID June 2019
? unspsc-code => text,
? unspsc-version => text,
* $$meta-extension,
}
resource-collection = (
? directory => directory-entry,
? file => file-entry,
? process => process-entry,
? resource => resource-entry,
* $$resource-collection-extension
)
file-entry = {
filesystem-item,
? size => integer,
? file-version => text,
? hash => hash-entry,
* $$file-extension
}
path-elements-entry = [ [ * file-entry ],
[ * directory-entry ],
]
directory-entry = {
filesystem-item,
path-elements => path-elements-entry,
* $$directory-extension
}
process-entry = {
global-attributes,
process-name => text,
? pid => integer,
* $$process-extension
}
resource-entry = {
global-attributes,
type => text,
* $$resource-extension
}
filesystem-item = (
global-attributes,
? key => bool,
? location => text,
Birkholz, et al. Expires December 26, 2019 [Page 31]
Internet-Draft CoSWID June 2019
fs-name => text,
? root => text,
)
payload-entry = {
global-attributes,
resource-collection,
* $$payload-extension
}
evidence-entry = {
global-attributes,
resource-collection,
? date => time,
? device-id => text,
* $$evidence-extension
}
; "global map member" integer indexes
tag-id = 0
software-name = 1
entity = 2
evidence = 3
link = 4
software-meta = 5
payload = 6
hash = 7
corpus = 8
patch = 9
media = 10
supplemental = 11
tag-version = 12
software-version = 13
version-scheme = 14
lang = 15
directory = 16
file = 17
process = 18
resource = 19
size = 20
file-version = 21
key = 22
location = 23
fs-name = 24
root = 25
path-elements = 26
process-name = 27
pid = 28
Birkholz, et al. Expires December 26, 2019 [Page 32]
Internet-Draft CoSWID June 2019
type = 29
entity-name = 31
reg-id = 32
role = 33
thumbprint = 34
date = 35
device-id = 36
artifact = 37
href = 38
ownership = 39
rel = 40
media-type = 41
use = 42
activation-status = 43
channel-type = 44
colloquial-version = 45
description = 46
edition = 47
entitlement-data-required = 48
entitlement-key = 49
generator = 50
persistent-id = 51
product = 52
product-family = 53
revision = 54
summary = 55
unspsc-code = 56
unspsc-version = 57
; "version-scheme" integer indexes
multipartnumeric = 1
multipartnumeric-suffix = 2
alphanumeric = 3
decimal = 4
semver = 16384
; "role" integer indexes
tag-creator=1
software-creator=2
aggregator=3
distributor=4
licensor=5
; ownership integer indexes
shared=1
private=2
abandon=3
Birkholz, et al. Expires December 26, 2019 [Page 33]
Internet-Draft CoSWID June 2019
; "rel" integer indexes
ancestor=1
component=2
feature=3
installationmedia=4
packageinstaller=5
parent=6
patches=7
requires=8
see-also=9
supersedes=10
supplemental=11
; "use" integer indexes
optional=1
required=2
recommended=3
3. Determining the Type of CoSWID
The operational model for SWID and CoSWID tags was introduced in
Section 1.1, which described four different CoSWID tag types. The
following additional rules apply to the use of CoSWID tags to ensure
that created tags properly identify the tag type.
The first matching rule MUST determine the type of the CoSWID tag.
1. Primary Tag: A CoSWID tag MUST be considered a primary tag if the
corpus, patch, and supplemental items are "false".
2. Supplemental Tag: A CoSWID tag MUST be considered a supplemental
tag if the supplemental item is set to "true".
3. Corpus Tag: A CoSWID tag MUST be considered a corpus tag if the
corpus item is "true".
4. Patch Tag: A CoSWID tag MUST be considered a patch tag if the
patch item is "true".
4. CoSWID Indexed Label Values
4.1. Version Scheme
The following table contains a set of values for use in the concise-
swid-tag group's version-scheme item. These values match the version
schemes defined in the ISO/IEC 19770-2:2015 [SWID] specification.
Index value indicates the value to use as the version-scheme item's
value. The Version Scheme Name provides human-readable text for the
Birkholz, et al. Expires December 26, 2019 [Page 34]
Internet-Draft CoSWID June 2019
value. The Definition describes the syntax of allowed values for
each entry.
+-------+-------------------------+---------------------------------+
| Index | Version Scheme Name | Definition |
+-------+-------------------------+---------------------------------+
| 1 | multipartnumeric | Numbers separated by dots, |
| | | where the numbers are |
| | | interpreted as integers |
| | | (e.g.,1.2.3, 1.4.5, |
| | | 1.2.3.4.5.6.7) |
| | | |
| 2 | multipartnumeric+suffix | Numbers separated by dots, |
| | | where the numbers are |
| | | interpreted as integers with an |
| | | additional textual suffix |
| | | (e.g., 1.2.3a) |
| | | |
| 3 | alphanumeric | Strictly a string, sorting is |
| | | done alphanumerically |
| | | |
| 4 | decimal | A floating point number (e.g., |
| | | 1.25 is less than 1.3) |
| | | |
| 16384 | semver | Follows the [SEMVER] |
| | | specification |
+-------+-------------------------+---------------------------------+
The values above are registered in the IANA "SWID/CoSWID Version
Scheme Value" registry defined in section Section 5.2.1. Additional
entires will likely be registered over time in this registry.
Additionally, the index values 32768 through 65535 have been reserved
for private use.
4.2. Entity Role Values
The following table indicates the index value to use for the entity-
entry group's role item (see Section 2.5). These values match the
entity roles defined in the ISO/IEC 19770-2:2015 [SWID]
specification. The "Index" value indicates the value to use as the
role item's value. The "Role Name" provides human-readable text for
the value. The "Definition" describes the semantic meaning of each
entry.
Birkholz, et al. Expires December 26, 2019 [Page 35]
Internet-Draft CoSWID June 2019
+-------+-----------------+-----------------------------------------+
| Index | Role Name | Definition |
+-------+-----------------+-----------------------------------------+
| 1 | tagCreator | The person or organization that created |
| | | the containing SWID or CoSWID tag |
| | | |
| 2 | softwareCreator | From [SAM], "person or organization |
| | | that creates a software product (3.46) |
| | | or package" |
| | | |
| 3 | aggregator | From {{SWID}, "An organization or |
| | | system that encapsulates software from |
| | | their own and/or other organizations |
| | | into a different distribution process |
| | | (as in the case of virtualization), or |
| | | as a completed system to accomplish a |
| | | specific task (as in the case of a |
| | | value added reseller)." |
| | | |
| 4 | distributor | From [SWID], "An entity that furthers |
| | | the marketing, selling and/or |
| | | distribution of software from the |
| | | original place of manufacture to the |
| | | ultimate user without modifying the |
| | | software, its packaging or its |
| | | labelling." |
| | | |
| 5 | licensor | From [SAM] as "software licensor", a |
| | | "person or organization who owns or |
| | | holds the rights to issue a software |
| | | license for a specific software |
| | | package" |
+-------+-----------------+-----------------------------------------+
The values above are registered in the IANA "SWID/CoSWID Entity Role
Value" registry defined in section Section 5.2.2. Additional valid
values will likely be registered over time. Additionally, the index
values 128 through 255 have been reserved for private use.
4.3. Link Ownership Values
The following table indicates the index value to use for the link-
entry group's ownership item (see Section 2.6). These values match
the link ownership values defined in the ISO/IEC 19770-2:2015 [SWID]
specification. The "Index" value indicates the value to use as the
link-entry group ownership item's value. The "Ownership Type"
provides human-readable text for the value. The "Definition"
describes the semantic meaning of each entry.
Birkholz, et al. Expires December 26, 2019 [Page 36]
Internet-Draft CoSWID June 2019
+-------+-----------+-----------------------------------------------+
| Index | Ownership | Definition |
| | Type | |
+-------+-----------+-----------------------------------------------+
| 1 | abandon | If the software component referenced by the |
| | | CoSWID tag is uninstalled, then the |
| | | referenced software SHOULD not be uninstalled |
| | | |
| 2 | private | If the software component referenced by the |
| | | CoSWID tag is uninstalled, then the |
| | | referenced software SHOULD be uninstalled as |
| | | well. |
| | | |
| 3 | shared | If the software component referenced by the |
| | | CoSWID tag is uninstalled, then the |
| | | referenced software SHOULD be uninstalled if |
| | | no other components sharing the software. |
+-------+-----------+-----------------------------------------------+
The values above are registered in the IANA "SWID/CoSWID Link
Ownership Value" registry defined in section Section 5.2.3.
Additional valid values will likely be registered over time.
Additionally, the index values 128 through 255 have been reserved for
private use.
4.4. Link Rel Values
The following table indicates the index value to use for the link-
entry group's rel item (see Section 2.6). These values match the
link rel values defined in the ISO/IEC 19770-2:2015 [SWID]
specification. The "Index" value indicates the value to use as the
link-entry group ownership item's value. The "Relationship Type"
provides human-readable text for the value. The "Definition"
describes the semantic meaning of each entry.
+-------+-------------------+---------------------------------------+
| Index | Relationship Type | Definition |
+-------+-------------------+---------------------------------------+
| 1 | ancestor | The link references a SWID/CoSWID tag |
| | | for an ancestor of this software. |
| | | This can be useful to define an |
| | | upgrade path. |
| | | |
| 2 | component | The link references a SWID/CoSWID tag |
| | | for a separate component of this |
| | | software. |
| | | |
| 3 | feature | The link references a configurable |
Birkholz, et al. Expires December 26, 2019 [Page 37]
Internet-Draft CoSWID June 2019
| | | feature of this software, that can be |
| | | enabled or disabled without changing |
| | | the installed files. |
| | | |
| 4 | installationmedia | The link references the installation |
| | | package that can be used to install |
| | | this software. |
| | | |
| 5 | packageinstaller | The link references the installation |
| | | software needed to install this |
| | | software. |
| | | |
| 6 | parent | The link references a SWID/CoSWID tag |
| | | that is the parent of this |
| | | SWID/CoSWID tag. |
| | | |
| 7 | patches | The link references a SWID/CoSWID tag |
| | | that this software patches. Typically |
| | | only used for patch SWID/CoSWID tags |
| | | (see Section 1.1). |
| | | |
| 8 | requires | The link references a prerequisite |
| | | for installing this software. A patch |
| | | SWID/CoSWID tag (see Section 1.1) can |
| | | use this to represent base software |
| | | or another patch that needs to be |
| | | installed first. |
| | | |
| 9 | see-also | The link references other software |
| | | that may be of interest that relates |
| | | to this software. |
| | | |
| 10 | supersedes | The link references another software |
| | | that this software replaces. A patch |
| | | SWID/CoSWID tag (see Section 1.1) can |
| | | use this to represent another patch |
| | | that this patch incorporates or |
| | | replaces. |
| | | |
| 11 | supplemental | The link references a SWID/CoSWID tag |
| | | that this tag supplements. Used on |
| | | supplemental SWID/CoSWID tags (see |
| | | Section 1.1). |
+-------+-------------------+---------------------------------------+
The values above are registered in the IANA "SWID/CoSWID Link
Relationship Value" registry defined in section Section 5.2.4.
Additional valid values will likely be registered over time.
Birkholz, et al. Expires December 26, 2019 [Page 38]
Internet-Draft CoSWID June 2019
Additionally, the index values 32768 through 65535 have been reserved
for private use.
4.5. Link Use Values
The following table indicates the index value to use for the link-
entry group's use item (see Section 2.6). These values match the
link use values defined in the ISO/IEC 19770-2:2015 [SWID]
specification. The "Index" value indicates the value to use as the
link-entry group use item's value. The "Use Type" provides human-
readable text for the value. The "Definition" describes the semantic
meaning of each entry.
+-------+-------------+---------------------------------------------+
| Index | Use Type | Definition |
+-------+-------------+---------------------------------------------+
| 1 | optional | From [SWID], "Not absolutely required; the |
| | | [Link]'d software is installed only when |
| | | specified." |
| | | |
| 2 | required | From [SWID], "The [Link]'d software is |
| | | absolutely required for an operation |
| | | software installation." |
| | | |
| 3 | recommended | From [SWID], "Not absolutely required; the |
| | | [Link]'d software is installed unless |
| | | specified otherwise." |
+-------+-------------+---------------------------------------------+
The values above are registered in the IANA "SWID/CoSWID Link Use
Value" registry defined in section Section 5.2.5. Additional valid
values will likely be registered over time. Additionally, the index
values 128 through 255 have been reserved for private use.
5. IANA Considerations
This document has a number of IANA considerations, as described in
the following subsections.
5.1. CoSWID Items Registry
This document uses integer values as index values in CBOR maps.
This document defines a new a new registry titled "CoSWID Items".
Future registrations for this registry are to be made based on
[RFC8126] as follows:
Birkholz, et al. Expires December 26, 2019 [Page 39]
Internet-Draft CoSWID June 2019
+------------------+-------------------------+
| Range | Registration Procedures |
+------------------+-------------------------+
| 0-32767 | Standards Action |
| | |
| 32768-4294967295 | Specification Required |
+------------------+-------------------------+
All negative values are reserved for Private Use.
Initial registrations for the "CoSWID Items" registry are provided
below. Assignments consist of an integer index value, the item name,
and a reference to the defining specification.
+---------------+---------------------------+---------------+
| Index | Item Name | Specification |
+---------------+---------------------------+---------------+
| 0 | tag-id | RFC-AAAA |
| | | |
| 1 | software-name | RFC-AAAA |
| | | |
| 2 | entity | RFC-AAAA |
| | | |
| 3 | evidence | RFC-AAAA |
| | | |
| 4 | link | RFC-AAAA |
| | | |
| 5 | software-meta | RFC-AAAA |
| | | |
| 6 | payload | RFC-AAAA |
| | | |
| 7 | hash | RFC-AAAA |
| | | |
| 8 | corpus | RFC-AAAA |
| | | |
| 9 | patch | RFC-AAAA |
| | | |
| 10 | media | RFC-AAAA |
| | | |
| 11 | supplemental | RFC-AAAA |
| | | |
| 12 | tag-version | RFC-AAAA |
| | | |
| 13 | software-version | RFC-AAAA |
| | | |
| 14 | version-scheme | RFC-AAAA |
| | | |
| 15 | lang | RFC-AAAA |
Birkholz, et al. Expires December 26, 2019 [Page 40]
Internet-Draft CoSWID June 2019
| | | |
| 16 | directory | RFC-AAAA |
| | | |
| 17 | file | RFC-AAAA |
| | | |
| 18 | process | RFC-AAAA |
| | | |
| 19 | resource | RFC-AAAA |
| | | |
| 20 | size | RFC-AAAA |
| | | |
| 21 | file-version | RFC-AAAA |
| | | |
| 22 | key | RFC-AAAA |
| | | |
| 23 | location | RFC-AAAA |
| | | |
| 24 | fs-name | RFC-AAAA |
| | | |
| 25 | root | RFC-AAAA |
| | | |
| 26 | path-elements | RFC-AAAA |
| | | |
| 27 | process-name | RFC-AAAA |
| | | |
| 28 | pid | RFC-AAAA |
| | | |
| 29 | type | RFC-AAAA |
| | | |
| 31 | entity-name | RFC-AAAA |
| | | |
| 32 | reg-id | RFC-AAAA |
| | | |
| 33 | role | RFC-AAAA |
| | | |
| 34 | thumbprint | RFC-AAAA |
| | | |
| 35 | date | RFC-AAAA |
| | | |
| 36 | device-id | RFC-AAAA |
| | | |
| 37 | artifact | RFC-AAAA |
| | | |
| 38 | href | RFC-AAAA |
| | | |
| 39 | ownership | RFC-AAAA |
| | | |
| 40 | rel | RFC-AAAA |
Birkholz, et al. Expires December 26, 2019 [Page 41]
Internet-Draft CoSWID June 2019
| | | |
| 41 | media-type | RFC-AAAA |
| | | |
| 42 | use | RFC-AAAA |
| | | |
| 43 | activation-status | RFC-AAAA |
| | | |
| 44 | channel-type | RFC-AAAA |
| | | |
| 45 | colloquial-version | RFC-AAAA |
| | | |
| 46 | description | RFC-AAAA |
| | | |
| 47 | edition | RFC-AAAA |
| | | |
| 48 | entitlement-data-required | RFC-AAAA |
| | | |
| 49 | entitlement-key | RFC-AAAA |
| | | |
| 50 | generator | RFC-AAAA |
| | | |
| 51 | persistent-id | RFC-AAAA |
| | | |
| 52 | product | RFC-AAAA |
| | | |
| 53 | product-family | RFC-AAAA |
| | | |
| 54 | revision | RFC-AAAA |
| | | |
| 55 | summary | RFC-AAAA |
| | | |
| 56 | unspsc-code | RFC-AAAA |
| | | |
| 57 | unspsc-version | RFC-AAAA |
| | | |
| 58-4294967295 | Unassigned | |
+---------------+---------------------------+---------------+
5.2. SWID/CoSWID Value Registries
The following IANA registries provide a mechanism for new valid
values to be added over time to common enumerations used by SWID and
CoSWID.
Birkholz, et al. Expires December 26, 2019 [Page 42]
Internet-Draft CoSWID June 2019
5.2.1. SWID/CoSWID Version Scheme Value Registry
This document uses unsigned 16-bit index values to represent version-
scheme item values. The initial set of version-scheme values are
derived from the textual version scheme names defined in the ISO/IEC
19770-2:2015 specification [SWID].
This document defines a new a new registry titled "SWID/CoSWID
Version Scheme Values". Future registrations for this registry are
to be made based on [RFC8126] as follows:
[TO BE REMOVED: This registration should take place at the following
location: https://www.iana.org/assignments/swid]
+-------------+--------------------------+
| Range | Registration Procedures |
+-------------+--------------------------+
| 0-16383 | Standards Action |
| | |
| 16384-32767 | Specification Required |
| | |
| 32768-65535 | Reserved for Private Use |
+-------------+--------------------------+
Initial registrations for the "SWID/CoSWID Version Scheme Value"
registry are provided below. Assignments consist of an integer Index
value, the Version Scheme Name, and a reference to the defining
specification.
Birkholz, et al. Expires December 26, 2019 [Page 43]
Internet-Draft CoSWID June 2019
+-------------+--------------------------+-----------------+
| Index | Version Scheme Name | Specification |
+-------------+--------------------------+-----------------+
| 0 | Reserved | |
| | | |
| 1 | multipartnumeric | See Section 4.1 |
| | | |
| 2 | multipartnumeric+suffix | See Section 4.1 |
| | | |
| 3 | alphanumeric | See Section 4.1 |
| | | |
| 4 | decimal | See Section 4.1 |
| | | |
| 5-16383 | Unassigned | |
| | | |
| 16384 | semver | [SEMVER] |
| | | |
| 16385-32767 | Unassigned | |
| | | |
| 32768-65535 | Reserved for Private Use | |
+-------------+--------------------------+-----------------+
5.2.2. SWID/CoSWID Entity Role Value Registry
This document uses unsigned 8-bit index values to represent entity-
entry role item values. The initial set of Entity roles are derived
from the textual role names defined in the ISO/IEC 19770-2:2015
specification [SWID].
This document defines a new a new registry titled "SWID/CoSWID Entity
Role Values". Future registrations for this registry are to be made
based on [RFC8126] as follows:
[TO BE REMOVED: This registration should take place at the following
location: https://www.iana.org/assignments/swid]
+---------+--------------------------+
| Range | Registration Procedures |
+---------+--------------------------+
| 0-31 | Standards Action |
| | |
| 32-127 | Specification Required |
| | |
| 128-255 | Reserved for Private Use |
+---------+--------------------------+
Birkholz, et al. Expires December 26, 2019 [Page 44]
Internet-Draft CoSWID June 2019
Initial registrations for the "SWID/CoSWID Entity Role Value"
registry are provided below. Assignments consist of an integer Index
value, a Role Name, and a reference to the defining specification.
+---------+--------------------------+-----------------+
| Index | Role Name | Specification |
+---------+--------------------------+-----------------+
| 0 | Reserved | |
| | | |
| 1 | tagCreator | See Section 4.2 |
| | | |
| 2 | softwareCreator | See Section 4.2 |
| | | |
| 3 | aggregator | See Section 4.2 |
| | | |
| 4 | distributor | See Section 4.2 |
| | | |
| 5 | licensor | See Section 4.2 |
| | | |
| 6-127 | Unassigned | |
| | | |
| 128-255 | Reserved for Private Use | |
+---------+--------------------------+-----------------+
5.2.3. SWID/CoSWID Link Ownership Value Registry
This document uses unsigned 8-bit index values to represent link-
entry ownership item values. The initial set of Link ownership
values are derived from the textual ownership names defined in the
ISO/IEC 19770-2:2015 specification [SWID].
This document defines a new a new registry titled "SWID/CoSWID Link
Ownership Values". Future registrations for this registry are to be
made based on [RFC8126] as follows:
[TO BE REMOVED: This registration should take place at the following
location: https://www.iana.org/assignments/swid]
+---------+--------------------------+
| Range | Registration Procedures |
+---------+--------------------------+
| 0-31 | Standards Action |
| | |
| 32-127 | Specification Required |
| | |
| 128-255 | Reserved for Private Use |
+---------+--------------------------+
Birkholz, et al. Expires December 26, 2019 [Page 45]
Internet-Draft CoSWID June 2019
Initial registrations for the "SWID/CoSWID Link Ownership Value"
registry are provided below. Assignments consist of an integer Index
value, an Ownership Type Name, and a reference to the defining
specification.
+-------------+--------------------------+-----------------+
| Index | Ownership Type Name | Definition |
+-------------+--------------------------+-----------------+
| 0 | Reserved | |
| | | |
| 1 | abandon | See Section 4.3 |
| | | |
| 2 | private | See Section 4.3 |
| | | |
| 3 | shared | See Section 4.3 |
| | | |
| 4-16384 | Unassigned | |
| | | |
| 16385-32767 | Unassigned | |
| | | |
| 32768-65535 | Reserved for Private Use | |
+-------------+--------------------------+-----------------+
5.2.4. SWID/CoSWID Link Relationship Value Registry
This document uses unsigned 16-bit index values to represent link-
entry rel item values. The initial set of rel values are derived
from the textual rel names defined in the ISO/IEC 19770-2:2015
specification [SWID].
This document defines a new a new registry titled "SWID/CoSWID Link
Relationship Values". Future registrations for this registry are to
be made based on [RFC8126] as follows:
[TO BE REMOVED: This registration should take place at the following
location: https://www.iana.org/assignments/swid]
+-------------+--------------------------+
| Range | Registration Procedures |
+-------------+--------------------------+
| 0-16383 | Standards Action |
| | |
| 16384-32767 | Specification Required |
| | |
| 32768-65535 | Reserved for Private Use |
+-------------+--------------------------+
Birkholz, et al. Expires December 26, 2019 [Page 46]
Internet-Draft CoSWID June 2019
Initial registrations for the "SWID/CoSWID Link Relationship Value"
registry are provided below. Assignments consist of an integer Index
value, the Relationship Type Name, and a reference to the defining
specification.
+-------------+--------------------------+-----------------+
| Index | Relationship Type Name | Specification |
+-------------+--------------------------+-----------------+
| 0 | Reserved | |
| | | |
| 1 | ancestor | See Section 4.4 |
| | | |
| 2 | component | See Section 4.4 |
| | | |
| 3 | feature | See Section 4.4 |
| | | |
| 4 | installationmedia | See Section 4.4 |
| | | |
| 5 | packageinstaller | See Section 4.4 |
| | | |
| 6 | parent | See Section 4.4 |
| | | |
| 7 | patches | See Section 4.4 |
| | | |
| 8 | requires | See Section 4.4 |
| | | |
| 9 | see-also | See Section 4.4 |
| | | |
| 10 | supersedes | See Section 4.4 |
| | | |
| 11 | supplemental | See Section 4.4 |
| | | |
| 12-16384 | Unassigned | |
| | | |
| 16385-32767 | Unassigned | |
| | | |
| 32768-65535 | Reserved for Private Use | |
+-------------+--------------------------+-----------------+
5.2.5. SWID/CoSWID Link Use Value Registry
This document uses unsigned 8-bit index values to represent link-
entry use item values. The initial set of Link use values are
derived from the textual names defined in the ISO/IEC 19770-2:2015
specification [SWID].
Birkholz, et al. Expires December 26, 2019 [Page 47]
Internet-Draft CoSWID June 2019
This document defines a new a new registry titled "SWID/CoSWID Link
Use Values". Future registrations for this registry are to be made
based on [RFC8126] as follows:
[TO BE REMOVED: This registration should take place at the following
location: https://www.iana.org/assignments/swid]
+---------+--------------------------+
| Range | Registration Procedures |
+---------+--------------------------+
| 0-31 | Standards Action |
| | |
| 32-127 | Specification Required |
| | |
| 128-255 | Reserved for Private Use |
+---------+--------------------------+
Initial registrations for the "SWID/CoSWID Entity Role Value"
registry are provided below. Assignments consist of an integer Index
value, the Link Use Type Name, and a reference to the defining
specification.
+---------+--------------------------+-----------------+
| Index | Link Use Type Name | Specification |
+---------+--------------------------+-----------------+
| 0 | Reserved | |
| | | |
| 1 | optional | See Section 4.5 |
| | | |
| 2 | required | See Section 4.5 |
| | | |
| 3 | recommended | See Section 4.5 |
| | | |
| 4-127 | Unassigned | |
| | | |
| 128-255 | Reserved for Private Use | |
+---------+--------------------------+-----------------+
5.3. swid+cbor Media Type Registration
IANA is requested add the following to the IANA "Media Types"
registry.
Type name: application
Subtype name: swid+cbor
Required parameters: none
Birkholz, et al. Expires December 26, 2019 [Page 48]
Internet-Draft CoSWID June 2019
Optional parameters: none
Encoding considerations: Must be encoded as using [RFC7049]. See
RFC-AAAA for details.
Security considerations: See Section 6 of RFC-AAAA.
Interoperability considerations: Applications MAY ignore any key
value pairs that they do not understand. This allows backwards
compatible extensions to this specification.
Published specification: RFC-AAAA
Applications that use this media type: The type is used by Software
asset management systems, Vulnerability assessment systems, and in
applications that use remote integrity verification.
Fragment identifier considerations: Fragment identification for
application/swid+cbor is supported by using fragment identifiers as
specified by RFC-AAAA. [Section to be defined]
Additional information:
Magic number(s): first five bytes in hex: da 53 57 49 44
File extension(s): coswid
Macintosh file type code(s): none
Macintosh Universal Type Identifier code: org.ietf.coswid conforms to
public.data
Person & email address to contact for further information: Henk
Birkholz <henk.birkholz@sit.fraunhofer.de>
Intended usage: COMMON
Restrictions on usage: None
Author: Henk Birkholz <henk.birkholz@sit.fraunhofer.de>
Change controller: IESG
5.4. CoAP Content-Format Registration
IANA is requested to assign a CoAP Content-Format ID for the CoSWID
media type in the "CoAP Content-Formats" sub-registry, from the "IETF
Birkholz, et al. Expires December 26, 2019 [Page 49]
Internet-Draft CoSWID June 2019
Review or IESG Approval" space (256..999), within the "CoRE
Parameters" registry [RFC7252]:
+-----------------------+----------+------+-----------+
| Media type | Encoding | ID | Reference |
+-----------------------+----------+------+-----------+
| application/swid+cbor | - | TBD1 | RFC-AAAA |
+-----------------------+----------+------+-----------+
Table 1: CoAP Content-Format IDs
5.5. CBOR Tag Registration
IANA is requested to allocate a tag in the "CBOR Tags" registry",
preferably with the specific value requested:
+------------+----------+-------------------------------------------+
| Tag | Data | Semantics |
| | Item | |
+------------+----------+-------------------------------------------+
| 1398229316 | map | Concise Software Identifier (CoSWID) |
| | | [RFC-AAAA] |
+------------+----------+-------------------------------------------+
6. Security Considerations
SWID and CoSWID tags contain public information about software
components and, as such, do not need to be protected against
disclosure on an endpoint. Similarly, SWID tags are intended to be
easily discoverable by applications and users on an endpoint in order
to make it easy to identify and collect all of an endpoint's SWID
tags. As such, any security considerations regarding SWID tags focus
on the application of SWID tags to address security challenges, and
the possible disclosure of the results of those applications.
A signed SWID tag whose signature has been validated can be relied
upon to be unchanged since it was signed. If the SWID tag was
created by the software provider, is signed, and the software
provider can be authenticated as the originator of the signature,
then the tag can be considered authoritative. In this way, an
authoritative SWID tag contains information about a software product
provided by the maintainer of the product, who is expected to be an
expert in their own product. Thus, authoritative SWID tags can be
trusted to represent authoritative information about the software
product. Having an authoritative SWID tag can be useful when the
information in the tag needs to be trusted, such as when the tag is
being used to convey reference integrity measurements for software
Birkholz, et al. Expires December 26, 2019 [Page 50]
Internet-Draft CoSWID June 2019
components. By contrast, the data contained in unsigned tags cannot
be trusted to be unmodified.
SWID tags are designed to be easily added and removed from an
endpoint along with the installation or removal of software
components. On endpoints where addition or removal of software
components is tightly controlled, the addition or removal of SWID
tags can be similarly controlled. On more open systems, where many
users can manage the software inventory, SWID tags can be easier to
add or remove. On such systems, it can be possible to add or remove
SWID tags in a way that does not reflect the actual presence or
absence of corresponding software components. Similarly, not all
software products automatically install SWID tags, so products can be
present on an endpoint without providing a corresponding SWID tag.
As such, any collection of SWID tags cannot automatically be assumed
to represent either a complete or fully accurate representation of
the software inventory of the endpoint. However, especially on
devices that more strictly control the ability to add or remove
applications, SWID tags are an easy way to provide an preliminary
understanding of that endpoint's software inventory.
Any report of an endpoint's SWID tag collection provides information
about the software inventory of that endpoint. If such a report is
exposed to an attacker, this can tell them which software products
and versions thereof are present on the endpoint. By examining this
list, the attacker might learn of the presence of applications that
are vulnerable to certain types of attacks. As noted earlier, SWID
tags are designed to be easily discoverable by an endpoint, but this
does not present a significant risk since an attacker would already
need to have access to the endpoint to view that information.
However, when the endpoint transmits its software inventory to
another party, or that inventory is stored on a server for later
analysis, this can potentially expose this information to attackers
who do not yet have access to the endpoint. For this reason, it is
important to protect the confidentiality of SWID tag information that
has been collected from an endpoint, not because those tags
individually contain sensitive information, but because the
collection of SWID tags and their association with an endpoint
reveals information about that endpoint's attack surface.
Finally, both the ISO-19770-2:2015 XML schema definition and the
Concise SWID data definition allow for the construction of "infinite"
SWID tags or SWID tags that contain malicious content with the intent
if creating non-deterministic states during validation or processing
of SWID tags. While software product vendors are unlikely to do
this, SWID tags can be created by any party and the SWID tags
collected from an endpoint could contain a mixture of vendor and non-
vendor created tags. For this reason, tools that consume SWID tags
Birkholz, et al. Expires December 26, 2019 [Page 51]
Internet-Draft CoSWID June 2019
ought to treat the tag contents as potentially malicious and employ
input sanitizing on the tags they ingest.
7. Acknowledgments
TBD
8. Change Log
Changes from version 03 to version 09:
o Reduced representation complexity of the media-entry type and
removed the section describing the older data structure.
o Added more signature schemes from COSE
o Included a minimal required set of normative language
o Reordering of attribute name to integer label by priority
according to semantics.
o Added an IANA registry for CoSWID items supporting future
extension.
o Cleaned up IANA registrations, fixing some inconsistencies in the
table labels.
o Added additional CDDL sockets for resource collection entries
providing for additional extension points to address future SWID/
CoSWID extensions.
o Updated section on extension points to address new CDDL sockets
and to reference the new IANA registry for items.
o Removed unused references and added new references to address
placeholder comments.
o Added table with semantics for the link ownership item.
o Clarified language, made term use more consistent, fixed
references, and replacing lowercase RFC2119 keywords.
Changes from version 02 to version 03:
o Updated core CDDL including the CDDL design pattern according to
RFC 8428.
Changes from version 01 to version 02:
Birkholz, et al. Expires December 26, 2019 [Page 52]
Internet-Draft CoSWID June 2019
o Enforced a more strict separation between the core CoSWID
definition and additional usage by moving content to corresponding
appendices.
o Removed artifacts inherited from the reference schema provided by
ISO (e.g. NMTOKEN(S))
o Simplified the core data definition by removing group and type
choices where possible
o Minor reordering of map members
o Added a first extension point to address requested flexibility for
extensions beyond the any-element
Changes from version 00 to version 01:
o Ambiguity between evidence and payload eliminated by introducing
explicit members (while still
o allowing for "empty" SWID tags)
o Added a relatively restrictive COSE envelope using cose_sign1 to
define signed CoSWID (single signer only, at the moment)
o Added a definition how to encode hashes that can be stored in the
any-member using existing IANA tables to reference hash-algorithms
Changes since adopted as a WG I-D -00:
o Removed redundant any-attributes originating from the ISO-
19770-2:2015 XML schema definition
o Fixed broken multi-map members
o Introduced a more restrictive item (any-element-map) to represent
custom maps, increased restriction on types for the any-attribute,
accordingly
o Fixed X.1520 reference
o Minor type changes of some attributes (e.g. NMTOKENS)
o Added semantic differentiation of various name types (e,g. fs-
name)
Changes from version 06 to version 07:
Birkholz, et al. Expires December 26, 2019 [Page 53]
Internet-Draft CoSWID June 2019
o Added type choices/enumerations based on textual definitions in
19770-2:2015
o Added value registry request
o Added media type registration request
o Added content format registration request
o Added CBOR tag registration request
o Removed RIM appedix to be addressed in complementary draft
o Removed CWT appendix
o Flagged firmware resource colletion appendix for revision
o Made use of terminology more consistent
o Better defined use of extension points in the CDDL
o Added definitions for indexed values
o Added IANA registry for Link use indexed values
Changes from version 05 to version 06:
o Improved quantities
o Included proposals for implicet enumerations that were NMTOKENS
o Added extension points
o Improved exemplary firmware-resource extension
Changes from version 04 to version 05:
o Clarified language around SWID and CoSWID to make more consistent
use of these terms.
o Added language describing CBOR optimizations for single vs. arrays
in the model front matter.
o Fixed a number of grammatical, spelling, and wording issues.
o Documented extension points that use CDDL sockets.
Birkholz, et al. Expires December 26, 2019 [Page 54]
Internet-Draft CoSWID June 2019
o Converted IANA registration tables to markdown tables, reserving
the 0 value for use when a value is not known.
o Updated a number of references to their current versions.
Changes from version 03 to version 04:
o Re-index label values in the CDDL.
o Added a section describing the CoSWID model in detail.
o Created IANA registries for entity-role and version-scheme
Changes from version 02 to version 03:
o Updated CDDL to allow for a choice between a payload or evidence
o Re-index label values in the CDDL.
o Added item definitions
o Updated references for COSE, CBOR Web Token, and CDDL.
Changes from version 01 to version 02:
o Added extensions for Firmware and CoSWID use as Reference
Integrity Measurements (CoSWID RIM)
o Changes meta handling in CDDL from use of an explicit use of items
to a more flexible unconstrained collection of items.
o Added sections discussing use of COSE Signatures and CBOR Web
Tokens
Changes from version 00 to version 01:
o Added CWT usage for absolute SWID paths on a device
o Fixed cardinality of type-choices including arrays
o Included first iteration of firmware resource-collection
9. Contributors
Birkholz, et al. Expires December 26, 2019 [Page 55]
Internet-Draft CoSWID June 2019
10. References
10.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC5646] Phillips, A., Ed. and M. Davis, Ed., "Tags for Identifying
Languages", BCP 47, RFC 5646, DOI 10.17487/RFC5646,
September 2009, <https://www.rfc-editor.org/info/rfc5646>.
[RFC7049] Bormann, C. and P. Hoffman, "Concise Binary Object
Representation (CBOR)", RFC 7049, DOI 10.17487/RFC7049,
October 2013, <https://www.rfc-editor.org/info/rfc7049>.
[RFC7252] Shelby, Z., Hartke, K., and C. Bormann, "The Constrained
Application Protocol (CoAP)", RFC 7252,
DOI 10.17487/RFC7252, June 2014,
<https://www.rfc-editor.org/info/rfc7252>.
[RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for
Writing an IANA Considerations Section in RFCs", BCP 26,
RFC 8126, DOI 10.17487/RFC8126, June 2017,
<https://www.rfc-editor.org/info/rfc8126>.
[RFC8152] Schaad, J., "CBOR Object Signing and Encryption (COSE)",
RFC 8152, DOI 10.17487/RFC8152, July 2017,
<https://www.rfc-editor.org/info/rfc8152>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8288] Nottingham, M., "Web Linking", RFC 8288,
DOI 10.17487/RFC8288, October 2017,
<https://www.rfc-editor.org/info/rfc8288>.
[RFC8610] Birkholz, H., Vigano, C., and C. Bormann, "Concise Data
Definition Language (CDDL): A Notational Convention to
Express Concise Binary Object Representation (CBOR) and
JSON Data Structures", RFC 8610, DOI 10.17487/RFC8610,
June 2019, <https://www.rfc-editor.org/info/rfc8610>.
[SAM] "Information technology - Software asset management - Part
5: Overview and vocabulary", ISO/IEC 19770-5:2015,
November 2013.
Birkholz, et al. Expires December 26, 2019 [Page 56]
Internet-Draft CoSWID June 2019
[SEMVER] Preston-Werner, T., "Semantic Versioning 2.0.0", n.d.,
<https://semver.org/spec/v2.0.0.html>.
[SWID] "Information technology - Software asset management - Part
2: Software identification tag", ISO/IEC 19770-2:2015,
October 2015.
[SWID-GUIDANCE]
Waltermire, D., Cheikes, B., Feldman, L., and G. Witte,
"Guidelines for the Creation of Interoperable Software
Identification (SWID) Tags", NISTIR 8060, April 2016,
<https://doi.org/10.6028/NIST.IR.8060>.
[W3C.REC-css3-mediaqueries-20120619]
Rivoal, F., "Media Queries", World Wide Web Consortium
Recommendation REC-css3-mediaqueries-20120619, June 2012,
<http://www.w3.org/TR/2012/
REC-css3-mediaqueries-20120619>.
[W3C.REC-xpath20-20101214]
Berglund, A., Boag, S., Chamberlin, D., Fernandez, M.,
Kay, M., Robie, J., and J. Simeon, "XML Path Language
(XPath) 2.0 (Second Edition)", World Wide Web Consortium
Recommendation REC-xpath20-20101214, December 2010,
<http://www.w3.org/TR/2010/REC-xpath20-20101214>.
[X.1520] "Recommendation ITU-T X.1520 (2014), Common
vulnerabilities and exposures", April 2011.
10.2. Informative References
[CamelCase]
"UpperCamelCase", August 2014,
<http://wiki.c2.com/?CamelCase>.
[I-D.birkholz-rats-tuda]
Fuchs, A., Birkholz, H., McDonald, I., and C. Bormann,
"Time-Based Uni-Directional Attestation", draft-birkholz-
rats-tuda-00 (work in progress), March 2019.
[KebabCase]
"KebabCase", December 2014,
<http://wiki.c2.com/?KebabCase>.
[RFC4122] Leach, P., Mealling, M., and R. Salz, "A Universally
Unique IDentifier (UUID) URN Namespace", RFC 4122,
DOI 10.17487/RFC4122, July 2005,
<https://www.rfc-editor.org/info/rfc4122>.
Birkholz, et al. Expires December 26, 2019 [Page 57]
Internet-Draft CoSWID June 2019
[RFC8322] Field, J., Banghart, S., and D. Waltermire, "Resource-
Oriented Lightweight Information Exchange (ROLIE)",
RFC 8322, DOI 10.17487/RFC8322, February 2018,
<https://www.rfc-editor.org/info/rfc8322>.
[RFC8520] Lear, E., Droms, R., and D. Romascanu, "Manufacturer Usage
Description Specification", RFC 8520,
DOI 10.17487/RFC8520, March 2019,
<https://www.rfc-editor.org/info/rfc8520>.
Appendix A. Signed Concise SWID Tags using COSE
SWID tags, as defined in the ISO-19770-2:2015 XML schema, can include
cryptographic signatures to protect the integrity of the SWID tag.
In general, tags are signed by the tag creator (typically, although
not exclusively, the vendor of the software component that the SWID
tag identifies). Cryptographic signatures can make any modification
of the tag detectable, which is especially important if the integrity
of the tag is important, such as when the tag is providing reference
integrity measurements for files.
The ISO-19770-2:2015 XML schema uses XML DSIG to support
cryptographic signatures. CoSWID tags require a different signature
scheme than this. COSE (CBOR Object Signing and Encryption) provides
the required mechanism [RFC8152]. Concise SWID can be wrapped in a
COSE Single Signer Data Object (COSE_Sign1) that contains a single
signature. The following CDDL defines a more restrictive subset of
header attributes allowed by COSE tailored to suit the requirements
of Concise SWID tags.
Birkholz, et al. Expires December 26, 2019 [Page 58]
Internet-Draft CoSWID June 2019
<CODE BEGINS>
signed-coswid = #6.18(COSE-Sign1-coswid)
cose-label = int / tstr
cose-values = any
protected-signed-coswid-header = {
1 => int, ; algorithm identifier
3 => "application/swid+cbor",
* cose-label => cose-values,
}
unprotected-signed-coswid-header = {
4 => bstr, ; key identifier
* cose-label => cose-values,
}
COSE-Sign1-coswid = [
protected: bstr .cbor protected-signed-coswid-header,
unprotected: unprotected-signed-coswid-header,
payload: bstr .cbor concise-swid-tag,
signature: bstr,
]
<CODE ENDS>
Optionally, the COSE_Sign structure that allows for more than one
signature to be applied to a CoSWID tag MAY be used. The
corresponding usage scenarios are domain-specific and require well-
defined application guidance. Representation of the corresponding
guidance is out-of-scope of this document.
Additionally, the COSE Header counter signature MAY be used as an
attribute in the unprotected header map of the COSE envelope of a
CoSWID. The application of counter signing enables second parties to
provide a signature on a signature allowing for a proof that a
signature existed at a given time (i.e., a timestamp).
Authors' Addresses
Henk Birkholz
Fraunhofer SIT
Rheinstrasse 75
Darmstadt 64295
Germany
Email: henk.birkholz@sit.fraunhofer.de
Birkholz, et al. Expires December 26, 2019 [Page 59]
Internet-Draft CoSWID June 2019
Jessica Fitzgerald-McKay
Department of Defense
9800 Savage Road
Ft. Meade, Maryland
USA
Email: jmfitz2@nsa.gov
Charles Schmidt
The MITRE Corporation
202 Burlington Road
Bedford, Maryland 01730
USA
Email: cmschmidt@mitre.org
David Waltermire
National Institute of Standards and Technology
100 Bureau Drive
Gaithersburg, Maryland 20877
USA
Email: david.waltermire@nist.gov
Birkholz, et al. Expires December 26, 2019 [Page 60]