Network Working Group                                         J. Reschke
Internet-Draft                                                greenbytes
Intended status: Standards Track                           June 25, 2017
Expires: December 27, 2017


              A JSON Encoding for HTTP Header Field Values
                       draft-reschke-http-jfv-06

Abstract

   This document establishes a convention for use of JSON-encoded field
   values in HTTP header fields.

Editorial Note (To be removed by RFC Editor before publication)

   Distribution of this document is unlimited.  Although this is not a
   work item of the HTTPbis Working Group, comments should be sent to
   the Hypertext Transfer Protocol (HTTP) mailing list at ietf-http-
   wg@w3.org [1], which may be joined by sending a message with subject
   "subscribe" to ietf-http-wg-request@w3.org [2].

   Discussions of the HTTPbis Working Group are archived at
   <http://lists.w3.org/Archives/Public/ietf-http-wg/>.

   XML versions and latest edits for this document are available from
   <http://greenbytes.de/tech/webdav/#draft-reschke-http-jfv>.

   The changes in this draft are summarized in Appendix E.9.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on December 27, 2017.





Reschke                 Expires December 27, 2017               [Page 1]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


Copyright Notice

   Copyright (c) 2017 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Data Model and Format . . . . . . . . . . . . . . . . . . . .   4
   3.  Sender Requirements . . . . . . . . . . . . . . . . . . . . .   5
   4.  Recipient Requirements  . . . . . . . . . . . . . . . . . . .   5
   5.  Using this Format in Header Field Definitions . . . . . . . .   5
   6.  Deployment Considerations . . . . . . . . . . . . . . . . . .   6
   7.  Interoperability Considerations . . . . . . . . . . . . . . .   6
     7.1.  Encoding and Characters . . . . . . . . . . . . . . . . .   6
     7.2.  Numbers . . . . . . . . . . . . . . . . . . . . . . . . .   6
     7.3.  Object Constraints  . . . . . . . . . . . . . . . . . . .   7
   8.  Internationalization Considerations . . . . . . . . . . . . .   7
   9.  Security Considerations . . . . . . . . . . . . . . . . . . .   7
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . .   7
     10.1.  Normative References . . . . . . . . . . . . . . . . . .   7
     10.2.  Informative References . . . . . . . . . . . . . . . . .   8
   Appendix A.  Examples . . . . . . . . . . . . . . . . . . . . . .  10
     A.1.  Content-Length  . . . . . . . . . . . . . . . . . . . . .  10
     A.2.  Content-Disposition . . . . . . . . . . . . . . . . . . .  10
     A.3.  WWW-Authenticate  . . . . . . . . . . . . . . . . . . . .  11
     A.4.  Accept-Encoding . . . . . . . . . . . . . . . . . . . . .  12
   Appendix B.  Use of JSON Field Value Encoding in the Wild . . . .  13
     B.1.  W3C Reporting API Specification . . . . . . . . . . . . .  14
     B.2.  W3C Clear Site Data Specification . . . . . . . . . . . .  14
     B.3.  W3C Feature Policy Specification  . . . . . . . . . . . .  14
   Appendix C.  Relation to HTTP 'Key' Header Field  . . . . . . . .  14
   Appendix D.  Discussion . . . . . . . . . . . . . . . . . . . . .  14
   Appendix E.  Change Log (to be removed by RFC Editor before
                publication) . . . . . . . . . . . . . . . . . . . .  14
     E.1.  Since draft-reschke-http-jfv-00 . . . . . . . . . . . . .  15
     E.2.  Since draft-reschke-http-jfv-01 . . . . . . . . . . . . .  15
     E.3.  Since draft-reschke-http-jfv-02 . . . . . . . . . . . . .  15



Reschke                 Expires December 27, 2017               [Page 2]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


     E.4.  Since draft-reschke-http-jfv-03 . . . . . . . . . . . . .  15
     E.5.  Since draft-reschke-http-jfv-04 . . . . . . . . . . . . .  15
     E.6.  Since draft-ietf-httpbis-jfv-00 . . . . . . . . . . . . .  15
     E.7.  Since draft-ietf-httpbis-jfv-01 . . . . . . . . . . . . .  15
     E.8.  Since draft-ietf-httpbis-jfv-02 . . . . . . . . . . . . .  15
     E.9.  Since draft-reschke-http-jfv-05 . . . . . . . . . . . . .  16
   Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . .  16
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .  16

1.  Introduction

   Defining syntax for new HTTP header fields ([RFC7230], Section 3.2)
   is non-trivial.  Among the commonly encountered problems are:

   o  There is no common syntax for complex field values.  Several well-
      known header fields do use a similarly looking syntax, but it is
      hard to write generic parsing code that will both correctly handle
      valid field values but also reject invalid ones.

   o  The HTTP message format allows header fields to repeat, so field
      syntax needs to be designed in a way that these cases are either
      meaningful, or can be unambiguously detected and rejected.

   o  HTTP/1.1 does not define a character encoding scheme ([RFC6365],
      Section 2), so header fields are either stuck with US-ASCII
      ([RFC0020]), or need out-of-band information to decide what
      encoding scheme is used.  Furthermore, APIs usually assume a
      default encoding scheme in order to map from octet sequences to
      strings (for instance, [XMLHttpRequest] uses the IDL type
      "ByteString", effectively resulting in the ISO-8859-1 character
      encoding scheme [ISO-8859-1] being used).

   (See Section 8.3.1 of [RFC7231] for a summary of considerations for
   new header fields.)

   This specification addresses the issues listed above by defining both
   a generic JSON-based ([RFC7159]) data model and a concrete wire
   format that can be used in definitions of new header fields, where
   the goals were:

   o  to be compatible with header field recombination when fields occur
      multiple times in a single message (Section 3.2.2 of [RFC7230]),
      and

   o  not to use any problematic characters in the field value (non-
      ASCII characters and certain whitespace characters).





Reschke                 Expires December 27, 2017               [Page 3]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


      Note: [HSTRUCT], a work item of the IETF HTTP Working Group, is a
      different attempt to address this set of problems -- it tries to
      identify and formalize common field structures in existing header
      fields; the syntax defined over there would usually lead to a more
      compact notation.

2.  Data Model and Format

   In HTTP, header fields with the same field name can occur multiple
   times within a single message (Section 3.2.2 of [RFC7230]).  When
   this happens, recipients are allowed to combine the field values
   using commas as delimiter.  This rule matches nicely JSON's array
   format (Section 5 of [RFC7159]).  Thus, the basic data model used
   here is the JSON array.

   Header field definitions that need only a single value can restrict
   themselves to arrays of length 1, and are encouraged to define error
   handling in case more values are received (such as "first wins",
   "last wins", or "abort with fatal error message").

   JSON arrays are mapped to field values by creating a sequence of
   serialized member elements, separated by commas and optionally
   whitespace.  This is equivalent to using the full JSON array format,
   while leaving out the "begin-array" ('[') and "end-array" (']')
   delimiters.

   The ABNF character names and classes below are used (copied from
   [RFC5234], Appendix B.1):

     CR               = %x0D    ; carriage return
     HTAB             = %x09    ; horizontal tab
     LF               = %x0A    ; line feed
     SP               = %x20    ; space
     VCHAR            = %x21-7E ; visible (printing) characters

   Characters in JSON strings that are not allowed or discouraged in
   HTTP header field values -- that is, not in the "VCHAR" definition --
   need to be represented using JSON's "backslash" escaping mechanism
   ([RFC7159], Section 7).

   The control characters CR, LF, and HTAB do not appear inside JSON
   strings, but can be used outside (line breaks, indentation etc.).
   These characters need to be either stripped or replaced by space
   characters (ABNF "SP").

   Formally, using the HTTP specification's ABNF extensions defined in
   Section 7 of [RFC7230]:




Reschke                 Expires December 27, 2017               [Page 4]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


     json-field-value = #json-field-item
     json-field-item  = JSON-Text
                      ; see [RFC7159], Section 2,
                      ; post-processed so that only VCHAR characters
                      ; are used

3.  Sender Requirements

   To map a JSON array to an HTTP header field value, process each array
   element separately by:

   1.  generating the JSON representation,

   2.  stripping all JSON control characters (CR, HTAB, LF), or
       replacing them by space ("SP") characters,

   3.  replacing all remaining non-VSPACE characters by the equivalent
       backslash-escape sequence ([RFC7159], Section 7).

   The resulting list of strings is transformed into an HTTP field value
   by combining them using comma (%x2C) plus optional SP as delimiter,
   and encoding the resulting string into an octet sequence using the
   US-ASCII character encoding scheme ([RFC0020]).

4.  Recipient Requirements

   To map a set of HTTP header field instances to a JSON array:

   1.  combine all header field instances into a single field as per
       Section 3.2.2 of [RFC7230],

   2.  add a leading begin-array ("[") octet and a trailing end-array
       ("]") octet, then

   3.  run the resulting octet sequence through a JSON parser.

   The result of the parsing operation is either an error (in which case
   the header field values needs to be considered invalid), or a JSON
   array.

5.  Using this Format in Header Field Definitions

   Specifications defining new HTTP header fields need to take the
   considerations listed in Section 8.3.1 of [RFC7231] into account.
   Many of these will already be accounted for by using the format
   defined in this specification.





Reschke                 Expires December 27, 2017               [Page 5]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


   Readers of HTTP-related specifications frequently expect an ABNF
   definition of the field value syntax.  This is not really needed
   here, as the actual syntax is JSON text, as defined in Section 2 of
   [RFC7159].

   A very simple way to use this JSON encoding thus is just to cite this
   specification -- specifically the "json-field-value" ABNF production
   defined in Section 2 -- and otherwise not to talk about the details
   of the field syntax at all.

   An alternative approach is just to repeat the ABNF-related parts from
   Section 2.

   This frees the specification from defining the concrete on-the-wire
   syntax.  What's left is defining the field value in terms of a JSON
   array.  An important aspect is the question of extensibility, e.g.
   how recipients ought to treat unknown field names.  In general, a
   "must ignore" approach will allow protocols to evolve without
   versioning or even using entire new field names.

6.  Deployment Considerations

   This JSON-based syntax will only apply to newly introduced header
   fields, thus backwards compatibility is not a problem.  That being
   said, it is conceivable that there is existing code that might trip
   over double quotes not being used for HTTP's quoted-string syntax
   (Section 3.2.6 of [RFC7230]).

7.  Interoperability Considerations

   The "I-JSON Message Format" specification ([RFC7493]) addresses known
   JSON interoperability pain points.  This specification borrows from
   the requirements made over there:

7.1.  Encoding and Characters

   This specification requires that field values use only US-ASCII
   characters, and thus by definition use a subset of UTF-8 (Section 2.1
   of [RFC7493]).

7.2.  Numbers

   Be aware of the issues around number precision, as discussed in
   Section 2.2 of [RFC7493].







Reschke                 Expires December 27, 2017               [Page 6]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


7.3.  Object Constraints

   As described in Section 4 of [RFC7159], JSON parser implementations
   differ in the handling of duplicate object names.  Therefore, senders
   MUST NOT use duplicate object names, and recipients SHOULD either
   treat field values with duplicate names as invalid (consistent with
   [RFC7493], Section 2.3) or use the lexically last value (consistent
   with [ECMA-262], Section 24.3.1.1).

   Furthermore, ordering of object members is not significant and can
   not be relied upon.

8.  Internationalization Considerations

   In HTTP/1.1, header field values are represented by octet sequences,
   usually used to transmit ASCII characters, with restrictions on the
   use of certain control characters, and no associated default
   character encoding, nor a way to describe it ([RFC7230],
   Section 3.2).  HTTP/2 does not change this.

   This specification maps all characters which can cause problems to
   JSON escape sequences, thereby solving the HTTP header field
   internationalization problem.

   Future specifications of HTTP might change to allow non-ASCII
   characters natively.  In that case, header fields using the syntax
   defined by this specification would have a simple migration path (by
   just stopping to require escaping of non-ASCII characters).

9.  Security Considerations

   Using JSON-shaped field values is believed to not introduce any new
   threads beyond those described in Section 12 of [RFC7159], namely the
   risk of recipients using the wrong tools to parse them.

   Other than that, any syntax that makes extensions easy can be used to
   smuggle information through field values; however, this concern is
   shared with other widely used formats, such as those using parameters
   in the form of name/value pairs.

10.  References

10.1.  Normative References

   [RFC0020]  Cerf, V., "ASCII format for network interchange", STD 80,
              RFC 20, DOI 10.17487/RFC0020, October 1969,
              <http://www.rfc-editor.org/info/rfc20>.




Reschke                 Expires December 27, 2017               [Page 7]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


   [RFC5234]  Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234,
              DOI 10.17487/RFC5234, January 2008,
              <http://www.rfc-editor.org/info/rfc5234>.

   [RFC7159]  Bray, T., "The JavaScript Object Notation (JSON) Data
              Interchange Format", RFC 7159, DOI 10.17487/RFC7159, March
              2014, <http://www.rfc-editor.org/info/rfc7159>.

   [RFC7230]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Message Syntax and Routing",
              RFC 7230, DOI 10.17487/RFC7230, June 2014,
              <http://www.rfc-editor.org/info/rfc7230>.

   [RFC7231]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Semantics and Content", RFC 7231,
              DOI 10.17487/RFC7231, June 2014,
              <http://www.rfc-editor.org/info/rfc7231>.

   [RFC7493]  Bray, T., Ed., "The I-JSON Message Format", RFC 7493,
              DOI 10.17487/RFC7493, March 2015,
              <http://www.rfc-editor.org/info/rfc7493>.

10.2.  Informative References

   [CLEARSITE]
              West, M., "Clear Site Data", W3C Working Draft WD-clear-
              site-data-20160720, July 2016,
              <http://www.w3.org/TR/2016/WD-clear-site-data-20160720/>.

              Latest version available at <http://www.w3.org/TR/clear-
              site-data/>.

   [ECMA-262]
              Ecma International, "ECMA-262 6th Edition, The ECMAScript
              2015 Language Specification", Standard ECMA-262, June
              2015, <http://www.ecma-international.org/ecma-262/6.0/>.

   [FEATUREPOL]
              Clelland, I., "Clear Site Data", W3C Draft Community Group
              Report , June 2017, <https://wicg.github.io/feature-
              policy/>.

   [HSTRUCT]  Kamp, P-H., "HTTP Header Common Structure", draft-ietf-
              httpbis-header-structure-01 (work in progress), April
              2017.





Reschke                 Expires December 27, 2017               [Page 8]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


   [ISO-8859-1]
              International Organization for Standardization,
              "Information technology -- 8-bit single-byte coded graphic
              character sets -- Part 1: Latin alphabet No. 1", ISO/
              IEC 8859-1:1998, 1998.

   [KEY]      Fielding, R. and M. Nottingham, "The Key HTTP Response
              Header Field", draft-ietf-httpbis-key-01 (work in
              progress), March 2016.

   [REPORTING]
              Grigorik, I. and M. West, "Reporting API 1", W3C Group
              Note NOTE-reporting-1-20160607, June 2016,
              <http://www.w3.org/TR/2016/NOTE-reporting-1-20160607/>.

              Latest version available at <http://www.w3.org/TR/
              reporting-1/>.

   [RFC5987]  Reschke, J., "Character Set and Language Encoding for
              Hypertext Transfer Protocol (HTTP) Header Field
              Parameters", RFC 5987, DOI 10.17487/RFC5987, August 2010,
              <http://www.rfc-editor.org/info/rfc5987>.

   [RFC6266]  Reschke, J., "Use of the Content-Disposition Header Field
              in the Hypertext Transfer Protocol (HTTP)", RFC 6266,
              DOI 10.17487/RFC6266, June 2011,
              <http://www.rfc-editor.org/info/rfc6266>.

   [RFC6365]  Hoffman, P. and J. Klensin, "Terminology Used in
              Internationalization in the IETF", BCP 166, RFC 6365,
              DOI 10.17487/RFC6365, September 2011,
              <http://www.rfc-editor.org/info/rfc6365>.

   [RFC7235]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Authentication", RFC 7235,
              DOI 10.17487/RFC7235, June 2014,
              <http://www.rfc-editor.org/info/rfc7235>.

   [XMLHttpRequest]
              WhatWG, "XMLHttpRequest", <https://xhr.spec.whatwg.org/>.











Reschke                 Expires December 27, 2017               [Page 9]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


Appendix A.  Examples

   This section shows how some of the existing HTTP header fields would
   look like if they would use the format defined by this specification.

A.1.  Content-Length

   "Content-Length" is defined in Section 3.3.2 of [RFC7230], with the
   field value's ABNF being:

     Content-Length = 1*DIGIT

   So the field value is similar to a JSON number ([RFC7159],
   Section 6).

   Content-Length is restricted to a single field instance, as it
   doesn't use the list production (as per Section 3.2.2 of [RFC7230]).
   However, in practice multiple instances do occur, and the definition
   of the header field does indeed discuss how to handle these cases.

   If Content-Length was defined using the JSON format discussed here,
   the ABNF would be something like:

     Content-Length = #number
                    ; number: [RFC7159], Section 6

   ...and the prose definition would:

   o  restrict all numbers to be non-negative integers without
      fractions, and

   o  require that the array of values is of length 1 (but allow the
      case where the array is longer, but all members represent the same
      value)

A.2.  Content-Disposition

   Content-Disposition field values, defined in [RFC6266], consist of a
   "disposition type" (a string), plus multiple parameters, of which at
   least one ("filename") sometime needs to carry non-ASCII characters.

   For instance, the first example in Section 5 of [RFC6266]:

     Attachment; filename=example.html

   has a disposition type of "Attachment", with filename parameter value
   "example.html".  A JSON representation of this information might be:




Reschke                 Expires December 27, 2017              [Page 10]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


     {
       "Attachment": {
         "filename" : "example.html"
       }
     }

   which would translate to a header field value of:

     { "Attachment": { "filename" : "example.html" } }

   The third example in Section 5 of [RFC6266] uses a filename parameter
   containing non-US-ASCII characters:

     attachment; filename*=UTF-8''%e2%82%ac%20rates

   Note that in this case, the "filename*" parameter uses the encoding
   defined in [RFC5987], representing a filename starting with the
   Unicode character U+20AC (EURO SIGN), followed by " rates".  If the
   definition of Content-Disposition would have used the format proposed
   here, the workaround involving the "parameter*" syntax would not have
   been needed at all.

   The JSON representation of this value could then be:

     { "attachment": { "filename" : "\u20AC rates" } }

A.3.  WWW-Authenticate

   The WWW-Authenticate header field value is defined in Section 4.1 of
   [RFC7235] as a list of "challenges":

      WWW-Authenticate = 1#challenge

   ...where a challenge consists of a scheme with optional parameters:

     challenge   = auth-scheme [ 1*SP ( token68 / #auth-param ) ]

   An example for a complex header field value given in the definition
   of the header field is:

     Newauth realm="apps", type=1, title="Login to \"apps\"",
     Basic realm="simple"

   (line break added for readability)

   A possible JSON representation of this field value would be the array
   below:




Reschke                 Expires December 27, 2017              [Page 11]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


     [
       {
         "Newauth" : {
           "realm": "apps",
           "type" : 1,
           "title" : "Login to \"apps\""
         }
       },
       {
         "Basic" : {
           "realm": "simple"
         }
       }
     ]

   ...which would translate to a header field value of:

     { "Newauth" : { "realm": "apps", "type" : 1,
                     "title": "Login to \"apps\"" }},
     { "Basic" : { "realm": "simple"}}

A.4.  Accept-Encoding

   The Accept-Encoding header field value is defined in Section 5.3.4 of
   [RFC7231] as a list of codings, each of which allowing a weight
   parameter 'q':

      Accept-Encoding = #( codings [ weight ] )
      codings         = content-coding / "identity" / "*"
      weight          = OWS ";" OWS "q=" qvalue
      qvalue          = ( "0" [ "." 0*3DIGIT ] )
                      / ( "1" [ "." 0*3("0") ] )

   An example for a complex header field value given in the definition
   of the header field is:

     gzip;q=1.0, identity; q=0.5, *;q=0

   Due to the defaulting rules for the quality value ([RFC7231],
   Section 5.3.1), this could also be written as:

     gzip, identity; q=0.5, *; q=0

   A JSON representation could be:







Reschke                 Expires December 27, 2017              [Page 12]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


     [
       {
         "gzip" : {
         }
       },
       {
         "identity" : {
           "q": 0.5
         }
       },
       {
         "*" : {
           "q": 0
         }
       }
     ]

   ...which would translate to a header field value of:

     {"gzip": {}}, {"identity": {"q": 0.5}}, {"*": {"q": 0}}

   In this example, the part about "gzip" appears unnecessarily verbose,
   as the value is just an empty object.  A simpler notation would
   collapse members like these to string literals:

     "gzip", {"identity": {"q": 0.5}}, {"*": {"q": 0}}

   If this is desirable, the header field definition could allow both
   string literals and objects, and define that a mere string literal
   would be mapped to a member whose name is given by the string
   literal, and the value is an empty object.

   For what it's worth, one of the most common cases for 'Accept-
   Encoding' would become:

     "gzip", "deflate"

   which would be only a small overhead over the original format.

Appendix B.  Use of JSON Field Value Encoding in the Wild

   Since work started on this document, various specifications have
   adopted this format.  At least one of these moved away after the HTTP
   Working Group decided to focus on [HSTRUCT] (see thread starting at
   <https://lists.w3.org/Archives/Public/ietf-http-
   wg/2016OctDec/0505.html>).

   The sections below summarize the current usage of this format.



Reschke                 Expires December 27, 2017              [Page 13]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


B.1.  W3C Reporting API Specification

   Defined in W3C Note "Reporting API 1" (Section 3.1 of [REPORTING]).
   Still in use in latest editor copy as of June 2017.

B.2.  W3C Clear Site Data Specification

   Defined in W3C Working Draft "Clear Site Data" (Section 2.1 of
   [CLEARSITE]).  Latest Editor's Draft replaces the use of JSON with a
   custom syntax (see <https://lists.w3.org/Archives/Public/ietf-http-
   wg/2017AprJun/0214.html> for feedback).

B.3.  W3C Feature Policy Specification

   Defined in W3C Draft Community Group Report "Feature Policy"
   (Section 6.1 of [FEATUREPOL]).  Previously relied on this document,
   now replicates the syntax into a custom ABNF defined in a separate
   section (Section 5.1 of [FEATUREPOL]).

Appendix C.  Relation to HTTP 'Key' Header Field

   [KEY] aims to improve the cacheability of responses that vary based
   on certain request header fields, addressing lack of granularity in
   the existing "Vary" response header field ([RFC7231], Section 7.1.4).
   If the JSON-based format described by this document gains popularity,
   it might be useful to add a JSON-aware "Key Parameter" (see
   Section 2.3 of [KEY]).

Appendix D.  Discussion

   This approach uses a default of "JSON array", using implicit array
   markers.  An alternative would be a default of "JSON object".  This
   would simplify the syntax for non-list-typed header fields, but all
   the benefits of having the same data model for both types of header
   fields would be gone.  A hybrid approach might make sense, as long as
   it doesn't require any heuristics on the recipient's side.

      Note: a concrete proposal was made by Kazuho Oku in
      <https://lists.w3.org/Archives/Public/ietf-http-
      wg/2016JanMar/0155.html>.

   [[CREF1: Use of generic libs vs compactness of field values..]]

Appendix E.  Change Log (to be removed by RFC Editor before publication)







Reschke                 Expires December 27, 2017              [Page 14]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


E.1.  Since draft-reschke-http-jfv-00

   Editorial fixes + working on the TODOs.

E.2.  Since draft-reschke-http-jfv-01

   Mention slightly increased risk of smuggling information in header
   field values.

E.3.  Since draft-reschke-http-jfv-02

   Mention Kazuho Oku's proposal for abbreviated forms.

   Added a bit of text about the motivation for a concrete JSON subset
   (ack Cory Benfield).

   Expand I18N section.

E.4.  Since draft-reschke-http-jfv-03

   Mention relation to KEY header field.

E.5.  Since draft-reschke-http-jfv-04

   Between June and December 2016, this was a work item of the HTTP
   working group (see <https://datatracker.ietf.org/doc/draft-ietf-
   httpbis-jfv/>).  Work (if any) continues now on
   <https://datatracker.ietf.org/doc/draft-reschke-http-jfv/>.

   Changes made while this was a work item of the HTTP Working Group:

E.6.  Since draft-ietf-httpbis-jfv-00

   Added example for "Accept-Encoding" (inspired by Kazuho's feedback),
   showing a potential way to optimize the format when default values
   apply.

E.7.  Since draft-ietf-httpbis-jfv-01

   Add interop discussion, building on I-JSON and ECMA-262 (see
   <https://github.com/httpwg/http-extensions/issues/225>).

E.8.  Since draft-ietf-httpbis-jfv-02

   Move non-essential parts into appendix.

   Updated XHR reference.




Reschke                 Expires December 27, 2017              [Page 15]


Internet-Draft     JSON Encoding for HTTP Field Values         June 2017


E.9.  Since draft-reschke-http-jfv-05

   Add meat to "Using this Format in Header Field Definitions".

   Add a few lines on the relation to "Key".

   Summarize current use of the format.

Acknowledgements

   Thanks go to the Hypertext Transfer Protocol Working Group
   participants.

Author's Address

   Julian F. Reschke
   greenbytes GmbH
   Hafenweg 16
   Muenster, NW  48155
   Germany

   EMail: julian.reschke@greenbytes.de
   URI:   http://greenbytes.de/tech/webdav/




























Reschke                 Expires December 27, 2017              [Page 16]