Network Working Group A. Rundgren
Internet-Draft Independent
Intended status: Informational B. Jordan
Expires: March 17, 2020 Symantec Corporation
S. Erdtman
Spotify AB
September 14, 2019
JSON Canonicalization Scheme (JCS)
draft-rundgren-json-canonicalization-scheme-09
Abstract
Cryptographic operations like hashing and signing requires that the
data is expressed in an invariant format. One way addressing this
issue is creating a canonical form of the data. Canonicalization
also permits data to be exchanged in its original form on the "wire"
while secure cryptographic operations are performed on its
canonicalized counterpart in the producer and consumer end points.
The JSON Canonicalization Scheme (JCS) provides canonicalization
support for data in the JSON format by building on the strict
serialization methods for JSON primitives defined by ECMAScript,
constraining JSON data to the I-JSON subset, and through a
deterministic property sorting scheme.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on 17 March 2020.
Copyright Notice
Copyright (c) 2019 IETF Trust and the persons identified as the
document authors. All rights reserved.
Rundgren, et al. Expires March 17, 2020 [Page 1]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/
license-info) in effect on the date of publication of this document.
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document. Code Components
extracted from this document must include Simplified BSD License text
as described in Section 4.e of the Trust Legal Provisions and are
provided without warranty as described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Detailed Operation . . . . . . . . . . . . . . . . . . . . . 4
3.1. Creation of Input Data . . . . . . . . . . . . . . . . . 4
3.2. Generation of Canonical JSON Data . . . . . . . . . . . . 5
3.2.1. Whitespace . . . . . . . . . . . . . . . . . . . . . 5
3.2.2. Serialization of Primitive Data Types . . . . . . . . 5
3.2.2.1. Serialization of Literals . . . . . . . . . . . . 6
3.2.2.2. Serialization of Strings . . . . . . . . . . . . 6
3.2.2.3. Serialization of Numbers . . . . . . . . . . . . 6
3.2.3. Sorting of Object Properties . . . . . . . . . . . . 7
3.2.4. UTF-8 Generation . . . . . . . . . . . . . . . . . . 9
4. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 9
5. Security Considerations . . . . . . . . . . . . . . . . . . . 9
6. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 10
7. References . . . . . . . . . . . . . . . . . . . . . . . . . 10
7.1. Normative References . . . . . . . . . . . . . . . . . . 10
7.2. Informal References . . . . . . . . . . . . . . . . . . . 11
Appendix A. ES6 Sample Canonicalizer . . . . . . . . . . . . . . 11
Appendix B. Number Serialization Samples . . . . . . . . . . . . 13
Appendix C. Canonicalized JSON as "Wire Format" . . . . . . . . 14
Appendix D. Dealing with Big Numbers . . . . . . . . . . . . . . 15
Appendix E. String Subtype Handling . . . . . . . . . . . . . . 16
E.1. Subtypes in Arrays . . . . . . . . . . . . . . . . . . . 18
Appendix F. Implementation Guidelines . . . . . . . . . . . . . 18
Appendix G. Open Source Implementations . . . . . . . . . . . . 19
Appendix H. Other JSON Canonicalization Efforts . . . . . . . . 19
Appendix I. Development Portal . . . . . . . . . . . . . . . . . 20
Appendix J. Document History . . . . . . . . . . . . . . . . . . 20
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 21
Rundgren, et al. Expires March 17, 2020 [Page 2]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
1. Introduction
Cryptographic operations like hashing and signing requires that the
data is expressed in an invariant format. One way of accomplishing
this is converting the data into a format that has a simple and fixed
representation like Base64Url [RFC4648], which is how JWS [RFC7515]
addressed this issue.
Another solution is to create a canonical version of the data,
similar to what was done for the XML Signature [XMLDSIG] standard.
The primary advantage with a canonicalizing scheme is that data can
be kept in its original form. This is the core rationale behind JCS.
Put another way: by using canonicalization a JSON Object may remain a
JSON Object even after being signed which can simplify system design,
documentation and logging.
To avoid "reinventing the wheel", JCS relies on serialization of JSON
primitives (strings, numbers and literals), compatible with
ECMAScript (aka JavaScript) beginning with version 6 [ES6], hereafter
referred to as "ES6".
Seasoned XML developers recalling difficulties getting signatures to
validate (usually due to different interpretations of the quite
intricate XML canonicalization rules as well as of the equally
extensive Web Services security standards), may rightfully wonder why
JCS would not suffer from similar issues. The reasons are twofold:
o The absence of a namespace concept and default values, as well as
constraining data to the I-JSON subset eliminate the need for
specific parsers for dealing with canonicalization.
o JCS compatible serialization of JSON primitives is supported by
most current Web browsers and as well as by Node.js [NODEJS],
while the full JCS specification is supported by multiple Open
Source implementations (see Appendix G). See also Appendix F.
In summary the JCS specification describes how serialization of JSON
primitives compliant with ES6 combined with a deterministic property
sorting scheme can be used for creating "Hashable" representations of
JSON data intended for consumption by cryptographic methods.
JCS is compatible with some existing systems relying on JSON
canonicalization such as JWK Thumbprint [RFC7638] and Keybase
[KEYBASE].
For potential uses outside of cryptography see [JSONCOMP].
Rundgren, et al. Expires March 17, 2020 [Page 3]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
The intended audiences of this document are JSON tool vendors, as
well as designers of JSON based cryptographic solutions. The reader
is assumed to have a basic knowledge of ECMAScript including the
"JSON" object.
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
3. Detailed Operation
This section describes the different issues related to creating a
canonical JSON representation, and how they are addressed by JCS.
3.1. Creation of Input Data
Data to be serialized is usually achieved by:
o Parsing previously generated JSON data.
o Programmatically creating data.
Irrespective of the method used, the data to be serialized MUST be
adapted for I-JSON [RFC7493] formatting, which implies the following:
o JSON Objects MUST NOT exhibit duplicate property names.
o JSON String data MUST be expressible as Unicode [UNICODE].
o JSON Number data MUST be expressible as IEEE-754 [IEEE754] double
precision values. For applications needing higher precision or
longer integers than offered by IEEE-754 double precision,
Appendix D outlines how such requirements can be supported in an
interoperable and extensible way.
An additional constraint is that parsed JSON String data MUST NOT be
altered during subsequent serializations. For more information see
Appendix E.
Note: although the Unicode standard offers a possibility combining
certain characters into one, referred to as "Unicode Normalization"
(https://www.unicode.org/reports/tr15/), JCS' string processing does
not take this in consideration. That is, all components involved in
a scheme depending on JCS, MUST preserve Unicode string data "as is".
Rundgren, et al. Expires March 17, 2020 [Page 4]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
Note: how structured objects like sets are represented in JSON is out
of scope for JCS. See also Appendix F.
3.2. Generation of Canonical JSON Data
The following subsections describe the steps required for creating a
canonical JSON representation of the data elaborated on in the
previous section.
Appendix A shows sample code for an ES6 based canonicalizer, matching
the JCS specification.
3.2.1. Whitespace
Whitespace between JSON tokens MUST NOT be emitted.
3.2.2. Serialization of Primitive Data Types
Assume that you parse a JSON object like the following:
{
"numbers": [333333333.33333329, 1E30, 4.50,
2e-3, 0.000000000000000000000000001],
"string": "\u20ac$\u000F\u000aA'\u0042\u0022\u005c\\\"\/",
"literals": [null, true, false]
}
If you subsequently serialize the parsed data using a serializer
compliant with ES6's "JSON.stringify()", the result would (with a
line wrap added for display purposes only), be rather divergent with
respect to representation of data:
{"numbers":[333333333.3333333,1e+30,4.5,0.002,1e-27],"string":
"€$\u000f\nA'B\"\\\\\"/","literals":[null,true,false]}
The reason for the difference between the parsed data and its
serialized counterpart, is due to a wide tolerance on input data (as
defined by JSON [RFC8259]), while output data (as defined by ES6),
has a fixed representation. As can be seen by the example, numbers
are subject to rounding as well.
The following subsections describe serialization of primitive JSON
data types according to JCS. This part is identical to that of ES6.
In the (unlikely) event that a future version of ECMAScript would
invalidate any of the following serialization methods, it will be up
to the developer community to either stick to this specification or
create a new specification.
Rundgren, et al. Expires March 17, 2020 [Page 5]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
3.2.2.1. Serialization of Literals
The JSON literals "null", "true", and "false" present no challenge
since they already have a fixed definition in JSON [RFC8259].
3.2.2.2. Serialization of Strings
For JSON String data (which includes JSON Object property names as
well), each Unicode code point MUST be serialized as described below
(also matching Section 24.3.2.2 of [ES6]):
o If the Unicode value falls within the traditional ASCII control
character range (U+0000 through U+001F), it MUST be serialized
using lowercase hexadecimal Unicode notation (\uhhhh) unless it is
in the set of predefined JSON control characters U+0008, U+0009,
U+000A, U+000C or U+000D which MUST be serialized as \b, \t, \n,
\f and \r respectively.
o If the Unicode value is outside of the ASCII control character
range, it MUST be serialized "as is" unless it is equivalent to
U+005C (\) or U+0022 (") which MUST be serialized as \\ and \"
respectively.
Finally, the resulting sequence of Unicode code points MUST be
enclosed in double quotes (").
Note: some JSON systems permit the use of invalid Unicode data
including "lone surrogates" (e.g. U+DEAD). Since this leads to
interoperability issues including broken signatures, occurrences of
such data MUST cause the JCS algorithm to terminate with an error
indication.
3.2.2.3. Serialization of Numbers
JSON Number data MUST be serialized according to Section 7.1.12.1 of
[ES6] including the "Note 2" enhancement.
Due to the relative complexity of this part, the algorithm itself is
not included in this document. However, the specification is fully
implemented by for example Google's V8 [V8]. The open source Java
implementation mentioned in Appendix G uses a recently developed
number serialization algorithm called Ryu [RYU].
ES6 builds on the IEEE-754 [IEEE754] double precision standard for
representing JSON Number data. Appendix B holds a set of IEEE-754
sample values and their corresponding JSON serialization.
Rundgren, et al. Expires March 17, 2020 [Page 6]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
Note: since NaN (Not a Number) and Infinity are not permitted in
JSON, occurrences of such values MUST cause the JCS algorithm to
terminate with an error indication.
3.2.3. Sorting of Object Properties
Although the previous step indeed normalized the representation of
primitive JSON data types, the result would not qualify as
"canonical" since JSON Object properties are not in lexicographic
(alphabetical) order.
Applied to the sample in Section 3.2.2, a properly canonicalized
version should (with a line wrap added for display purposes only),
read as:
{"literals":[null,true,false],"numbers":[333333333.3333333,
1e+30,4.5,0.002,1e-27],"string":"€$\u000f\nA'B\"\\\\\"/"}
The rules for lexicographic sorting of JSON Object properties
according to JCS are as follows:
o JSON Object properties MUST be sorted in a recursive manner which
means that possible JSON child Objects MUST have their properties
sorted as well.
o JSON Array data MUST also be scanned for presence of JSON Objects
(and applying associated property sorting), but array element
order MUST NOT be changed.
When a JSON Object is about to have its properties sorted, the
following measures MUST be adhered to:
o The sorting process is applied to property name strings in their
"raw" (unescaped) form. That is, a newline character is treated
as U+000A.
o Property name strings to be sorted are formatted as arrays of
UTF-16 [UNICODE] code units. The sorting is based on pure value
comparisons, where code units are treated as unsigned integers,
independent of locale settings.
o Property name strings either have different values at some index
that is a valid index for both strings, or their lengths are
different, or both. If they have different values at one or more
index positions, let k be the smallest such index; then the string
whose value at position k has the smaller value, as determined by
using the < operator, lexicographically precedes the other string.
If there is no index position at which they differ, then the
Rundgren, et al. Expires March 17, 2020 [Page 7]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
shorter string lexicographically precedes the longer string.
In plain English this means that property names are sorted in
ascending order like the following:
""
"a"
"aa"
"ab"
The rationale for basing the sorting algorithm on UTF-16 code units
is that it maps directly to the string type in ECMAScript (featured
in Web browsers and Node.js), Java and .NET. In addition, JSON only
supports escape sequences expressed as UTF-16 code units making
knowledge and handling of such data a necessity anyway. Systems
using another internal representation of string data will need to
convert JSON property name strings into arrays of UTF-16 code units
before sorting. The conversion from UTF-8 or UTF-32 to UTF-16 is
defined by the Unicode [UNICODE] standard.
The following test data can be used for verifying the correctness of
the sorting scheme in a JCS implementation. Input JSON data:
{
"\u20ac": "Euro Sign",
"\r": "Carriage Return",
"\ufb33": "Hebrew Letter Dalet With Dagesh",
"1": "One",
"\ud83d\ude00": "Emoji: Grinning Face",
"\u0080": "Control",
"\u00f6": "Latin Small Letter O With Diaeresis"
}
Expected argument order after sorting property strings:
"Carriage Return"
"One"
"Control"
"Latin Small Letter O With Diaeresis"
"Euro Sign"
"Emoji: Grinning Face"
"Hebrew Letter Dalet With Dagesh"
Note: for the purpose of obtaining a deterministic property order
sorting on UTF-8 or UTF-32 encoded data would also work but the
outcome for JSON data like above would differ and thus be
incompatible with this specification. However, in practice property
names are rarely defined outside of 7-bit ASCII making it possible
Rundgren, et al. Expires March 17, 2020 [Page 8]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
sorting on string data in UTF-8 or UTF-32 without conversions and
still be compatible with JCS. If this is a viable option or not
depends on the environment JCS is supposed to be used in.
3.2.4. UTF-8 Generation
Finally, in order to create a platform independent representation,
the result of the preceding step MUST be encoded in UTF-8.
Applied to the sample in Section 3.2.3 this should yield the
following bytes here shown in hexadecimal notation:
7b 22 6c 69 74 65 72 61 6c 73 22 3a 5b 6e 75 6c 6c 2c 74 72
75 65 2c 66 61 6c 73 65 5d 2c 22 6e 75 6d 62 65 72 73 22 3a
5b 33 33 33 33 33 33 33 33 33 2e 33 33 33 33 33 33 33 2c 31
65 2b 33 30 2c 34 2e 35 2c 30 2e 30 30 32 2c 31 65 2d 32 37
5d 2c 22 73 74 72 69 6e 67 22 3a 22 e2 82 ac 24 5c 75 30 30
30 66 5c 6e 41 27 42 5c 22 5c 5c 5c 5c 5c 22 2f 22 7d
This data is intended to be usable as input to cryptographic methods.
4. IANA Considerations
This document has no IANA actions.
5. Security Considerations
It is vital performing "sanity" checks on input data to avoid
overflowing buffers and similar things that could affect the
integrity of the system.
When JCS is applied to signature schemes like the one described in
Appendix F, applications MUST perform the following operations before
acting upon received data:
1. Parse the JSON data and verify that it adheres to I-JSON.
2. Verify the data for correctness according to the conventions
defined by the ecosystem where it is to be used. This also
includes locating the property holding the signature data.
3. Verify the signature.
If any of these steps fail, the operation in progress MUST be
aborted.
Rundgren, et al. Expires March 17, 2020 [Page 9]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
6. Acknowledgements
Building on ES6 Number serialization was originally proposed by
James Manger. This ultimately led to the adoption of the entire ES6
serialization scheme for JSON primitives.
Other people who have contributed with valuable input to this
specification include Scott Ananian, Tim Bray, Ben Campbell, Adrian
Farell, Richard Gibson, Bron Gondwana, John-Mark Gurney, John Levine,
Mark Miller, Matt Miller, Mike Jones, Mark Nottingham, Mike Samuel,
Jim Schaad, Robert Tupelo-Schneck and Michal Wadas.
For carrying out real world concept verification, the software and
support for number serialization provided by Ulf Adams,
Tanner Gooding and Remy Oudompheng was very helpful.
7. References
7.1. Normative References
[ES6] Ecma International, "ECMAScript 2015 Language
Specification", June 2015,
<https://www.ecma-international.org/ecma-262/6.0/
index.html>.
[IEEE754] IEEE, "IEEE Standard for Floating-Point Arithmetic",
August 2008, <http://grouper.ieee.org/groups/754/>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC7493] Bray, T., Ed., "The I-JSON Message Format", RFC 7493,
DOI 10.17487/RFC7493, March 2015,
<https://www.rfc-editor.org/info/rfc7493>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
Interchange Format", STD 90, RFC 8259,
DOI 10.17487/RFC8259, December 2017,
<https://www.rfc-editor.org/info/rfc8259>.
[UNICODE] The Unicode Consortium, "The Unicode Standard, Version
Rundgren, et al. Expires March 17, 2020 [Page 10]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
12.1.0", May 2019,
<https://www.unicode.org/versions/Unicode12.1.0/>.
7.2. Informal References
[JSONCOMP] A. Rundgren, ""Comparable" JSON - Work in progress",
<https://tools.ietf.org/html/draft-rundgren-comparable-
json-04>.
[KEYBASE] "Keybase",
<https://keybase.io/docs/api/1.0/canonical_packings#json>.
[NODEJS] "Node.js", <https://nodejs.org>.
[OPENAPI] "The OpenAPI Initiative", <https://www.openapis.org/>.
[RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data
Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006,
<https://www.rfc-editor.org/info/rfc4648>.
[RFC7515] Jones, M., Bradley, J., and N. Sakimura, "JSON Web
Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May
2015, <https://www.rfc-editor.org/info/rfc7515>.
[RFC7638] Jones, M. and N. Sakimura, "JSON Web Key (JWK)
Thumbprint", RFC 7638, DOI 10.17487/RFC7638, September
2015, <https://www.rfc-editor.org/info/rfc7638>.
[RYU] Ulf Adams, "Ryu floating point number serializing
algorithm", <https://github.com/ulfjack/ryu>.
[V8] Google LLC, "Chrome V8 Open Source JavaScript Engine",
<https://developers.google.com/v8/>.
[XMLDSIG] W3C, "XML Signature Syntax and Processing Version 1.1",
<https://www.w3.org/TR/xmldsig-core1/>.
Appendix A. ES6 Sample Canonicalizer
Below is an example of a JCS canonicalizer for usage with ES6 based
systems:
////////////////////////////////////////////////////////////
// Since the primary purpose of this code is highlighting //
// the core of the JCS algorithm, error handling and //
// UTF-8 generation were not implemented //
////////////////////////////////////////////////////////////
var canonicalize = function(object) {
Rundgren, et al. Expires March 17, 2020 [Page 11]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
var buffer = '';
serialize(object);
return buffer;
function serialize(object) {
if (object === null || typeof object !== 'object' ||
object.toJSON != null) {
/////////////////////////////////////////////////
// Primitive type or toJSON - Use ES6/JSON //
/////////////////////////////////////////////////
buffer += JSON.stringify(object);
} else if (Array.isArray(object)) {
/////////////////////////////////////////////////
// Array - Maintain element order //
/////////////////////////////////////////////////
buffer += '[';
let next = false;
object.forEach((element) => {
if (next) {
buffer += ',';
}
next = true;
/////////////////////////////////////////
// Array element - Recursive expansion //
/////////////////////////////////////////
serialize(element);
});
buffer += ']';
} else {
/////////////////////////////////////////////////
// Object - Sort properties before serializing //
/////////////////////////////////////////////////
buffer += '{';
let next = false;
Object.keys(object).sort().forEach((property) => {
if (next) {
buffer += ',';
}
next = true;
///////////////////////////////////////////////
// Property names are strings - Use ES6/JSON //
///////////////////////////////////////////////
buffer += JSON.stringify(property);
buffer += ':';
//////////////////////////////////////////
// Property value - Recursive expansion //
Rundgren, et al. Expires March 17, 2020 [Page 12]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
//////////////////////////////////////////
serialize(object[property]);
});
buffer += '}';
}
}
};
Appendix B. Number Serialization Samples
The following table holds a set of ES6 compatible Number
serialization samples, including some edge cases. The column
"IEEE-754" refers to the internal ES6 representation of the Number
data type which is based on the IEEE-754 [IEEE754] standard using
64-bit (double precision) values, here expressed in hexadecimal.
╒══════════════════╤═══════════════════════════╤═════════════════════╕
│ IEEE-754 │ JSON Representation │ Comment │
╞══════════════════╪═══════════════════════════╪═════════════════════╡
│ 0000000000000000 │ 0 │ Zero │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 8000000000000000 │ 0 │ Minus zero │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 0000000000000001 │ 5e-324 │ Min pos number │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 8000000000000001 │ -5e-324 │ Min neg number │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 7fefffffffffffff │ 1.7976931348623157e+308 │ Max pos number │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ ffefffffffffffff │ -1.7976931348623157e+308 │ Max neg number │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 4340000000000000 │ 9007199254740992 │ Max pos integer (1) │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ c340000000000000 │ -9007199254740992 │ Max neg integer (1) │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 4430000000000000 │ 295147905179352830000 │ ~2**68 (2) │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 7fffffffffffffff │ │ NaN (3) │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 7ff0000000000000 │ │ Infinity (3) │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 44b52d02c7e14af5 │ 9.999999999999997e+22 │ │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 44b52d02c7e14af6 │ 1e+23 │ │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 44b52d02c7e14af7 │ 1.0000000000000001e+23 │ │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 444b1ae4d6e2ef4e │ 999999999999999700000 │ │
Rundgren, et al. Expires March 17, 2020 [Page 13]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 444b1ae4d6e2ef4f │ 999999999999999900000 │ │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 444b1ae4d6e2ef50 │ 1e+21 │ │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 3eb0c6f7a0b5ed8c │ 9.999999999999997e-7 │ │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 3eb0c6f7a0b5ed8d │ 0.000001 │ │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 41b3de4355555553 │ 333333333.3333332 │ │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 41b3de4355555554 │ 333333333.33333325 │ │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 41b3de4355555555 │ 333333333.3333333 │ │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 41b3de4355555556 │ 333333333.3333334 │ │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 41b3de4355555557 │ 333333333.33333343 │ │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ becbf647612f3696 │ -0.0000033333333333333333 │ │
├──────────────────┼───────────────────────────┼─────────────────────┤
│ 43143ff3c1cb0959 │ 1424953923781206.2 │ Round to even (4) │
└──────────────────┴───────────────────────────┴─────────────────────┘
Notes:
(1) For maximum compliance with the ES6 "JSON" object values that
are to be interpreted as true integers SHOULD be in the range
-9007199254740991 to 9007199254740991. However, how numbers are
used in applications do not affect the JCS algorithm.
(2) Although a set of specific integers like 2**68 could be regarded
as having extended precision, the JCS/ES6 number serialization
algorithm does not take this in consideration.
(3) Invalid. See Section 3.2.2.3.
(4) This number is exactly 1424953923781206.25 but will after the
"Note 2" rule mentioned in Section 3.2.2.3 be truncated and
rounded to the closest even value.
Appendix C. Canonicalized JSON as "Wire Format"
Since the result from the canonicalization process (see
Section 3.2.4), is fully valid JSON, it can also be used as
"Wire Format". However, this is just an option since cryptographic
schemes based on JCS, in most cases would not depend on that
externally supplied JSON data already is canonicalized.
Rundgren, et al. Expires March 17, 2020 [Page 14]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
In fact, the ES6 standard way of serializing objects using
"JSON.stringify()" produces a more "logical" format, where properties
are kept in the order they were created or received. The example
below shows an address record which could benefit from ES6 standard
serialization:
{
"name": "John Doe",
"address": "2000 Sunset Boulevard",
"city": "Los Angeles",
"zip": "90001",
"state": "CA"
}
Using canonicalization the properties above would be output in the
order "address", "city", "name", "state" and "zip", which adds
fuzziness to the data from a human (developer or technical support),
perspective. Canonicalization also converts JSON data into a single
line of text, which may be less than ideal for debugging and logging.
Appendix D. Dealing with Big Numbers
There are several issues associated with the JSON Number type, here
illustrated by the following sample object:
{
"giantNumber": 1.4e+9999,
"payMeThis": 26000.33,
"int64Max": 9223372036854775807
}
Although the sample above conforms to JSON [RFC8259], applications
would normally use different native data types for storing
"giantNumber" and "int64Max". In addition, monetary data like
"payMeThis" would presumably not rely on floating point data types
due to rounding issues with respect to decimal arithmetic.
The established way handling this kind of "overloading" of the JSON
Number type (at least in an extensible manner), is through mapping
mechanisms, instructing parsers what to do with different properties
based on their name. However, this greatly limits the value of using
the JSON Number type outside of its original somewhat constrained,
JavaScript context. The ES6 "JSON" object does not support mappings
to JSON Number either.
Due to the above, numbers that do not have a natural place in the
current JSON ecosystem MUST be wrapped using the JSON String type.
This is close to a de-facto standard for open systems. This is also
Rundgren, et al. Expires March 17, 2020 [Page 15]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
applicable for other data types that do not have direct support in
JSON, like "DateTime" objects as described in Appendix E.
Aided by a system using the JSON String type; be it programmatic like
var obj = JSON.parse('{"giantNumber": "1.4e+9999"}');
var biggie = new BigNumber(obj.giantNumber);
or declarative schemes like OpenAPI [OPENAPI], JCS imposes no limits
on applications, including when using ES6.
Appendix E. String Subtype Handling
Due to the limited set of data types featured in JSON, the JSON
String type is commonly used for holding subtypes. This can
depending on JSON parsing method lead to interoperability problems
which MUST be dealt with by JCS compliant applications targeting a
wider audience.
Assume you want to parse a JSON object where the schema designer
assigned the property "big" for holding a "BigInteger" subtype and
"time" for holding a "DateTime" subtype, while "val" is supposed to
be a JSON Number compliant with JCS. The following example shows
such an object:
{
"time": "2019-01-28T07:45:10Z",
"big": "055",
"val": 3.5
}
Parsing of this object can accomplished by the following ES6
statement:
var object = JSON.parse(JSON_object_featured_as_a_string);
After parsing the actual data can be extracted which for subtypes
also involve a conversion step using the result of the parsing
process (an ECMAScript object) as input:
... = new Date(object.time); // Date object
... = BigInt(object.big); // Big integer
... = object.val; // JSON/JS number
Canonicalization of "object" using the sample code in Appendix A
would return the following string:
{"big":"055","time":"2019-01-28T07:45:10Z","val":3.5}
Rundgren, et al. Expires March 17, 2020 [Page 16]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
Although this is (with respect to JCS) technically correct, there is
another way parsing JSON data which also can be used with ECMAScript
as shown below:
// Note: "BigInt" is implemented by Google's V8 ECMAScript engine.
// It requires the following code to become JSON serializable.
BigInt.prototype.toJSON = function() {
return this.toString();
};
// JSON parsing using a "stream" based method
var object = JSON.parse(JSON_object_featured_as_a_string,
(k,v) => k == 'time' ? new Date(v) : k == 'big' ? BigInt(v) : v
);
If you now apply the canonicalizer in Appendix A to "object", the
following string would be generated:
{"big":"55","time":"2019-01-28T07:45:10.000Z","val":3.5}
In this case the string arguments for "big" and "time" have changed
with respect to the original, presumable making an application
depending on JCS fail.
The reason for the deviation is that in stream and schema based JSON
parsers, the original "string" argument is typically replaced on-the-
fly by the native subtype which when serialized, may exhibit a
different and platform dependent pattern.
That is, stream and schema based parsing MUST treat subtypes as
"pure" (immutable) JSON String types, and perform the actual
conversion to the designated native type in a subsequent step. In
modern programming platforms like Go, Java and C# this can be
achieved with moderate efforts by combining annotations, getters and
setters. Below is an example in C#/Json.NET showing a part of a
class that is serializable as a JSON Object:
// The "pure" string solution uses a local
// string variable for JSON serialization while
// exposing another type to the application
[JsonProperty("amount")]
private string _amount;
[JsonIgnore]
public decimal Amount {
get { return decimal.Parse(_amount); }
set { _amount = value.ToString(); }
}
Rundgren, et al. Expires March 17, 2020 [Page 17]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
In an application "Amount" can be accessed as any other property
while it is actually represented by a quoted string in JSON contexts.
Note: the example above also addresses the constraints on numeric
data implied by I-JSON (the C# "decimal" data type has quite
different characteristics compared to IEEE-754 double precision).
E.1. Subtypes in Arrays
Since the JSON Array construct permits mixing arbitrary JSON data
types, custom parsing and serialization code may be required to cope
with subtypes anyway.
Appendix F. Implementation Guidelines
The optimal solution is integrating support for JCS directly in JSON
serializers (parsers need no changes). That is, canonicalization
would just be an additional "mode" for a JSON serializer. However,
this is currently not the case. Fortunately JCS support can be
performed through externally supplied canonicalizer software,
enabling signature creation schemes like the following:
1. Create the data to be signed.
2. Serialize the data using existing JSON tools.
3. Let the external canonicalizer process the serialized data and
return canonicalized result data.
4. Sign the canonicalized data.
5. Add the resulting signature value to the original JSON data
through a designated signature property.
6. Serialize the completed (now signed) JSON object using existing
JSON tools.
A compatible signature verification scheme would then be as follows:
1. Parse the signed JSON data using existing JSON tools.
2. Read and save the signature value from the designated signature
property.
3. Remove the signature property from the parsed JSON object.
4. Serialize the remaining JSON data using existing JSON tools.
Rundgren, et al. Expires March 17, 2020 [Page 18]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
5. Let the external canonicalizer process the serialized data and
return canonicalized result data.
6. Verify that the canonicalized data matches the saved signature
value using the algorithm and key used for creating the
signature.
A canonicalizer like above is effectively only a "filter",
potentially usable with a multitude of quite different cryptographic
schemes.
Using a JSON serializer with integrated JCS support, the
serialization performed before the canonicalization step could be
eliminated for both processes.
Appendix G. Open Source Implementations
The following Open Source implementations have been verified to be
compatible with JCS:
* JavaScript: https://www.npmjs.com/package/canonicalize
* Java: https://github.com/erdtman/java-json-canonicalization
* Go: https://github.com/cyberphone/json-
canonicalization/tree/master/go
* .NET/C#: https://github.com/cyberphone/json-
canonicalization/tree/master/dotnet
* Python: https://github.com/cyberphone/json-
canonicalization/tree/master/python3
Appendix H. Other JSON Canonicalization Efforts
There are (and have been) other efforts creating "Canonical JSON".
Below is a list of URLs to some of them:
* https://tools.ietf.org/html/draft-staykov-hu-json-canonical-
form-00
* https://gibson042.github.io/canonicaljson-spec/
* http://wiki.laptop.org/go/Canonical_JSON
The listed efforts all build on text level JSON to JSON
transformations. The primary feature of text level canonicalization
is that it can be made neutral to the flavor of JSON used. However,
Rundgren, et al. Expires March 17, 2020 [Page 19]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
such schemes also imply major changes to the JSON parsing process
which is a likely hurdle for adoption. Albeit at the expense of
certain JSON and application constraints, JCS was designed to be
compatible with existing JSON tools.
The JCS specification is currently developed at:
https://github.com/cyberphone/ietf-json-canon.
The most recent "editors' copy" can be found at:
https://cyberphone.github.io/ietf-json-canon.
JCS source code and extensive test data is available at:
https://github.com/cyberphone/json-canonicalization
[[ to be removed by the RFC Editor before publication as an RFC ]]
Version 00-06:
* See IETF diff listings.
Version 07:
* Initial converson to XML RFC version 3.
* Changed intended status to "Informational".
* Added UTF-16 test data and explanations.
Version 08:
* Updated Abstract.
* Added a "Note 2" number serialization sample.
* Updated Security Considerations.
* Tried to clear up the JSON input data section.
* Added a line about Unicode normalization.
* Added a line about serialiation of structured data.
* Added a missing fact about "BigInt" (V8 not ES6).
Rundgren, et al. Expires March 17, 2020 [Page 20]
Internet-Draft draft-rundgren-json-canonicalization-schemeSeptember 2019
Version 09:
* Updated initial line of Abstract and Introduction.
* Added note about breaking ECMAScript changes.
* Minor nit fixes.
Authors' Addresses
Anders Rundgren
Independent
Montpellier
France
Email: anders.rundgren.net@gmail.com
URI: https://www.linkedin.com/in/andersrundgren/
Bret Jordan
Symantec Corporation
350 Ellis Street
Mountain View, CA 94043
United States of America
Email: bret_jordan@symantec.com
Samuel Erdtman
Spotify AB
Birger Jarlsgatan 61, 4tr
SE-113 56 Stockholm
Sweden
Email: erdtman@spotify.com
Rundgren, et al. Expires March 17, 2020 [Page 21]