CoRE Z. Shelby
Internet-Draft Sensinode
Intended status: Standards Track M. Vial
Expires: September 8, 2012 Schneider-Electric
March 7, 2012
CoRE Interfaces
draft-shelby-core-interfaces-02
Abstract
This document defines well-known REST interface descriptions for
Batch, Sensor, Parameter and Actuator types for use in contrained web
servers using the CoRE Link Format. A short reference is provided
for each type that can be efficiently included in the interface
description attribute of the CoRE Link Format. These descriptions
are intended to be for general use in resource designs or for
inclusion in more specific interface profiles. In addition, this
document defines the concept of Function Set to guide the creation of
RESTful profiles.
Status of this Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on September 8, 2012.
Copyright Notice
Copyright (c) 2012 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
Shelby & Vial Expires September 8, 2012 [Page 1]
Internet-Draft CoRE Interfaces March 2012
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Function Set . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.1. Defining a Function Set . . . . . . . . . . . . . . . . . 4
3.1.1. Path template . . . . . . . . . . . . . . . . . . . . 4
3.1.2. Resource Type . . . . . . . . . . . . . . . . . . . . 5
3.1.3. Interface Description . . . . . . . . . . . . . . . . 5
3.1.4. Data type . . . . . . . . . . . . . . . . . . . . . . 6
3.2. Discovery . . . . . . . . . . . . . . . . . . . . . . . . 6
3.3. Versioning . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Interface Descriptions . . . . . . . . . . . . . . . . . . . . 6
4.1. Link List . . . . . . . . . . . . . . . . . . . . . . . . 7
4.2. Batch . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.3. Linked Batch . . . . . . . . . . . . . . . . . . . . . . . 9
4.4. Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.5. Parameter . . . . . . . . . . . . . . . . . . . . . . . . 10
4.6. Read-only Parameter . . . . . . . . . . . . . . . . . . . 11
4.7. Actuator . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.8. Resource Observation . . . . . . . . . . . . . . . . . . . 12
4.9. Future Interfaces . . . . . . . . . . . . . . . . . . . . 13
4.10. WADL Description . . . . . . . . . . . . . . . . . . . . . 13
5. Security Considerations . . . . . . . . . . . . . . . . . . . 17
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 17
7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 17
8. Changelog . . . . . . . . . . . . . . . . . . . . . . . . . . 17
9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 18
9.1. Normative References . . . . . . . . . . . . . . . . . . . 18
9.2. Informative References . . . . . . . . . . . . . . . . . . 18
Appendix A. Profile example . . . . . . . . . . . . . . . . . . . 18
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 19
Shelby & Vial Expires September 8, 2012 [Page 2]
Internet-Draft CoRE Interfaces March 2012
1. Introduction
The Constrained RESTful Environments (CoRE) working group aims at
realizing the REST architecture in a suitable form for the most
constrained nodes (e.g. 8-bit microcontrollers with limited RAM and
ROM) and networks (e.g. 6LoWPAN). CoRE is aimed at machine-to-
machine (M2M) applications such as smart energy and building
automation.
The discovery of resources offered by a constrained server is very
important in machine-to-machine applications where there are no
humans in the loop and static interfaces result in fragility. The
discovery of resources provided by an HTTP Web Server is typically
called Web Linking [RFC5988]. The use of Web Linking for the
description and discovery of resources hosted by constrained web
servers is specified by the CoRE Link Format
[I-D.ietf-core-link-format] and can be used by CoAP
[I-D.ietf-core-coap] or HTTP servers. The CoRE Link Format defines
an attribute that can be used to describe the REST interface of a
resource, and may include a link to a description document. This
document describes how other specifications can combine resources
with a well-known interface to create new CoRE RESTful profiles. A
CoRE profile is based on the concept of the Function Set, which is a
group of REST resources providing a service in a distributed system.
This document also defines well-known interface descriptions for
Batch, Sensor, Parameter and Actuator types to compose new Function
Sets or for standalone use in a constrained web server. A short
reference is provided for each type that can be efficiently included
in the interface description (if=) attribute of the CoRE Link Format.
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
This specification requires readers to be familiar with all the terms
and concepts that are discussed in [RFC5988] and
[I-D.ietf-core-link-format]. This specification makes use of the
following additional terminology:
Function Set: A group of well-known REST resources that provides a
particular service.
Shelby & Vial Expires September 8, 2012 [Page 3]
Internet-Draft CoRE Interfaces March 2012
Profile: A group of well-known Function Sets defined by a
specification.
Device: An IP smart object running a web server that hosts a group
of Function Set instances from a profile.
Service Discovery: The process making it possible for a web client
to automatically detect devices and Function Sets offered by these
devices on a CoRE network.
Resource Discovery: The process allowing a web client to identify
resources being hosted on a web server.
Gradual Reveal: A REST design where resources are discovered
progressively using Web Linking.
3. Function Set
This section defines how a specification can organize REST resources
to create a new profile. A profile is structured into groups of
resource types called Function Sets. A Function Set is similar to a
function block in the sense that it consists of input, output and
parameter resources and contains internal logic. A Function Set MAY
have a subset of mandatory inputs, outputs and parameters to provide
minimum interoperability. It MAY also be extended with manufacturer/
user-specific resources. Other specifications defines the list of
function sets available within a given profile. A device is composed
of one or more Function Set instances. A profile specification MAY
specify device profiles with mandatory function sets.
3.1. Defining a Function Set
In a Function Set, types of resources are defined. Each type
includes a human readable name, a path template, a Resource Type for
discovery, the Interface Definition and the data type and allowed
values. A Function Set definition may also include a field
indicating if a sub-resource is mandatory or optional.
3.1.1. Path template
A Function Set is a container resource under which its sub-resources
are organized. The profile defines the path to each resource of a
Function Set in a path template. The template can contain either
relative paths or absolute paths depending on the profile needs. An
absolute Function Set SHOULD be located at its recommended root path
on a web server, however it MAY be located under an alternative path
if necessary (for example multi-purpose devices, gateways etc.). A
Shelby & Vial Expires September 8, 2012 [Page 4]
Internet-Draft CoRE Interfaces March 2012
relative Function Set can be instantiated as many times as needed on
a web server with an arbitrary root path. However some Function Sets
(e.g. device description) only make sense as singletons.
The path template includes a possible index {#} parameter, and
possible fixed path segments. The index {#} allows for multiple
instances of this type of resource, and can be any string. The root
path and the indexes are the only variable elements in a path
template. All other path segments MUST be fixed.
3.1.2. Resource Type
Each root resource of a Function Set is assigned a Resource Type
parameter, therefore making it possible to discover it. Each sub-
resource of a Function Set is also assigned a Resource Type
parameter. This Resource Type is used for resource discovery and is
usually necessary to discover optional resources supported on a
specific device. The Resource Type of a Function Set may also be
used for service discovery and MAY be exported to DNS-SD
[I-D.cheshire-dnsext-dns-sd] for example.
The Resource Type parameter defines the value that MUST be included
in the rt= field of the CoRE Link Format when describing a link to
this resource. The value SHOULD be in the form "namespace:type" for
root resources and "namespace:type:subtype" for sub-resources. This
naming convention facilitates resource type filtering with the
/.well-known/core resource. However a profile MAY allow mixing in
foreign namespace references within a Function Set to import external
references from other object models (e.g. SenML and UCUM).
3.1.3. Interface Description
The Interface Description parameter defines the REST interface for
that type of resource. Several base interfaces are defined in
Section 4 of this document. For a given profile, the Interface
Description may be inferred from the Resource Type. In that case the
Interface Description MAY be elided from link descriptions of
resource types defined in the profile, but SHOULD be included for
custom extensions to the profile.
The root resource of a Function Set should provide a list of links to
its sub-resources in order to offer gradual reveal of resources. The
CoRE Link List interface defined in Section 4.1 offers this
functionality so a root resource SHOULD support this interface or a
derived interface like CoRE Batch (See Section 4.2).
Shelby & Vial Expires September 8, 2012 [Page 5]
Internet-Draft CoRE Interfaces March 2012
3.1.4. Data type
The Data Type field defines the type of value (and possible range)
that is returned in response to a GET for that resource or accepted
with a PUT. The interfaces defined in Section 4 make use of plain
text and SenML Media types for the actual format of this data. A
profile may restrict the list of supported content types for the CoRE
interfaces or define new interfaces with new content types.
3.2. Discovery
A device conforming to a profile SHOULD make its resources
discoverable by providing links to the resources on the path /.well-
known/core as defined in [I-D.ietf-core-link-format]. All resources
hosted on a device SHOULD be discoverable either with a direct link
in /.well-known/core or by following successive links starting from
/.well-known/core.
The root path of a Function Set instance SHOULD be directly
referenced in /.well-known/core in order to offer discovery at the
first discovery stage. A device with more than 10 individual
resources SHOULD only expose Function Set instances in /.well-known/
core to limit the size of this resource.
In addition, a device MAY register its resources to a Resource
Directory using the registration interface defined in
[I-D.shelby-core-resource-directory] if such a directory is
available.
3.3. Versioning
A profile should track Function Set changes to avoid incompatibility
issues. Evolutions in a Function Set SHOULD be backward compatible.
4. Interface Descriptions
This section defines REST interfaces for Link List, Batch, Sensor,
Parameter and Actuator resources. Variants such as Linked Batch or
Read-Only Parameter are also presented. Each type is described along
with its Interface Description attribute value and valid methods.
These are defined for each interface in the table below. These
interfaces can support plain text and/or SenML Media types.
The if= column defines the Interface Description (if=) attribute
value to be used in the CoRE Link Format for a resource conforming to
that interface. When this value appears in the if= attribute of a
link, the resource MUST support the corresponding REST interface
Shelby & Vial Expires September 8, 2012 [Page 6]
Internet-Draft CoRE Interfaces March 2012
described in this section. The resource MAY support additional
functionality, which is out of scope for this specification.
Although these interface descriptions are intended to be used with
the CoRE Link Format, they are applicable for use in any REST
interface definition.
The Methods column defines the methods supported by that interface,
which are described in more detail below.
+-------------------+---------+-------------------------------------+
| Interface | if= | Methods |
+-------------------+---------+-------------------------------------+
| Link List | core#ll | GET |
| Batch | core#b | GET, PUT, POST (where applicable) |
| Linked Batch | core#lb | GET, PUT, POST, DELETE (where |
| | | applicable) |
| Sensor | core#s | GET |
| Parameter | core#p | GET, PUT |
| Read-only | core#rp | GET |
| Parameter | | |
| Actuator | core#a | GET, PUT, POST |
+-------------------+---------+-------------------------------------+
The following is an example of links in the CoRE Link Format using
these interface descriptions. The resource hierarchy is based on a
simple profile defined in Appendix A. These links are used in the
subsequent examples below.
Req: GET /.well-known/core
Res: 2.05 Content (application/link-format)
</s>;rt="simple:sen";if="core#b",
</s/lt>;rt="simple:sen:lt";if="core#s",
</s/tmp>;rt="simple:sen:tmp";if="core#s";obs,
</s/hum>;rt="simple:hum";if="core#s",
</a>;rt="simple:act";if="core#b",
</a/1/led>;rt="simple:act:led";if="core#a",
</a/2/led>;rt="simple:act:led";if="core#a",
</d>;rt="simple:dev";if="core#ll",
</l>;if="core#lb",
4.1. Link List
The Link List interface is used to retrieve (GET) a list of resources
on a web server. The GET request SHOULD contain an Accept option
with the application/link-format content type, however if the
resource does not support any other form of GET methods the Accept
option MAY be elided. The Accept option SHOULD only include the
Shelby & Vial Expires September 8, 2012 [Page 7]
Internet-Draft CoRE Interfaces March 2012
application/link-format content type. The request returns a list of
URI references with absolute paths to the resources as defined in
CoRE Link Format. This interface is typically used with a parent
resource to enumerate sub-resources but may be used to reference any
resource on a web server.
Link List is the base interface to provide gradual reveal of
resources on a CoRE web server, hence the root resource of a Function
Set SHOULD implement this interface or an extension of this
interface.
The following example interacts with a Link List /s containing Sensor
sub-resources /s/light, /s/temp and /s/humidity.
Req: GET /d (Accept:application/link-format)
Res: 2.05 Content (application/link-format)
</d/name>;rt="simple:dev:n";if="core#p",
</d/model>;rt="simple:dev:mdl";if="core#rp"
4.2. Batch
The Batch interface is used to manipulate a collection of sub-
resources at the same time. The Batch interface type supports the
same methods as its sub-resources, and can be used to read (GET), set
(PUT) or toggle (POST) the values of those sub-resource with a single
resource representation. The sub-resources of a Batch MAY be
heterogeneous, a method used on the Batch only applies to sub-
resources that support it. For example Sensor interfaces do not
support PUT, and thus a PUT request to a Sensor member of that Batch
would be ignored. A batch requires the use of SenML Media types in
order to support multiple sub-resources.
In addition, The Batch interface is an extension of the Link List
interface and in consequence MUST support the same methods.
The following example interacts with a Batch /s with Sensor sub-
resources /s/light, /s/temp and /s/humidity.
Req: GET /s
Res: 2.05 Content (application/senml+json)
{"e":[
{ "n": "light", "v": 123, "u": "lx" },
{ "n": "temp", "v": 27.2, "u": "degC" },
{ "n": "humidity", "v": 80, "u": "%RH" }],
}
Shelby & Vial Expires September 8, 2012 [Page 8]
Internet-Draft CoRE Interfaces March 2012
4.3. Linked Batch
The Linked Batch interface is an extension of the Batch interface.
Contrary to the basic Batch which is a collection statically defined
by the web server, a Linked Batch is dynamically controlled by a web
client. A Linked Batch resource has no sub-resources. Instead the
resources forming the batch are referenced using Web Linking
[RFC5988] and the CoRE Link Format [I-D.ietf-core-link-format]. A
request with a POST method and a content type of application/
link-format simply appends new resources to the collection. The
links in the payload MUST reference a resource on the web server with
an absolute path. A DELETE request empties the current collection of
links. All other requests available for a basic Batch are still
valid for a Linked Batch.
The following example interacts with a Linked Batch /l and creates a
collection containing /s/light, /s/temp and /s/humidity in 2 steps.
Req: POST /l (Content-type: application/link-format)
</s/light>,</s/temp>
Res: 2.04 Changed
Req: GET /l
Res: 2.05 Content (application/senml+json)
{"e":[
{ "n": "/s/light", "v": 123, "u": "lx" },
{ "n": "/s/temp", "v": 27.2, "u": "degC" },
}
Req: POST /l (Content-type: application/link-format)
</s/humidity>
Res: 2.04 Changed
Req: GET /l (Accept: application/link-format)
Res: 2.05 Content (application/link-format)
</s/light>,</s/temp>,</s/humidity>
Req: GET /l
Res: 2.05 Content (application/senml+json)
{"e":[
{ "n": "/s/light", "v": 123, "u": "lx" },
{ "n": "/s/temp", "v": 27.2, "u": "degC" },
{ "n": "/s/humidity", "v": 80, "u": "%RH" }],
}
Req: DELETE /l
Res: 2.04 Changed
Shelby & Vial Expires September 8, 2012 [Page 9]
Internet-Draft CoRE Interfaces March 2012
4.4. Sensor
The Sensor interface allows the value of a sensor resource to be read
(GET). The Media type of the resource can be either plain text or
SenML. Plain text MAY be used for a single measurement that does not
require meta-data. For a measurement with meta-data such as a unit
or time stamp, SenML SHOULD be used. A resource with this interface
MAY use SenML to return multiple measurements in the same
representation, for example a list of recent measurements.
The following are examples of Sensor interface requests in both text/
plain and application/senml+json.
Req: GET /s/humidity (Accept: text/plain)
Res: 2.05 Content (text/plain)
80
Req: GET /s/humidity (Accept: application/senml+json)
Res: 2.05 Content (application/senml+json)
{"e":[
{ "n": "humidity", "v": 80, "u": "%RH" }],
}
4.5. Parameter
The Parameter interface allows configurable parameters and other
information to be modeled as a resource. The value of the parameter
can be read (GET) or set (PUT). Plain text or SenML Media types MAY
be returned from this type of interface.
The following example shows request for reading and setting a
parameter.
Req: GET /d/name
Res: 2.05 Content (text/plain)
node5
Req: PUT /d/name (text/plain)
outdoor
Res: 2.04 Changed
Shelby & Vial Expires September 8, 2012 [Page 10]
Internet-Draft CoRE Interfaces March 2012
4.6. Read-only Parameter
The Read-only Parameter interface allows configuration parameters to
be read (GET) but not set. Plain text or SenML Media types MAY be
returned from this type of interface.
The following example shows request for reading such a parameter.
Req: GET /d/model
Res: 2.05 Content (text/plain)
SuperNode200
4.7. Actuator
The Actuator interface is used by resources that model different
kinds of actuators (changing its value has an effect on its
environment). Examples of actuators include for example LEDs,
relays, motor controllers and light dimmers. The current value of
the actuator can be read (GET) or a new actuator value set (PUT). In
addition, this interface defines the use of POST (with no body) to
toggle an actuator between its possible values. Plain text or SenML
Media types MAY be returned from this type of interface. A resource
with this interface MAY use SenML to include multiple measurements in
the same representation, for example a list of recent actuator values
or a list of values to set.
The following example shows request for reading, setting and toggling
an actuator (turning on a led).
Req: GET /a/1/led
Res: 2.05 Content (text/plain)
0
Req: PUT /a/1/led (text/plain)
1
Res: 2.04 Changed
Req: POST /a/1/led (text/plain)
Res: 2.04 Changed
Req: GET /a/1/led
Res: 2.05 Content (text/plain)
0
Shelby & Vial Expires September 8, 2012 [Page 11]
Internet-Draft CoRE Interfaces March 2012
4.8. Resource Observation
When resource interfaces following this specification are made
available over CoAP, the CoAP Observation mechanism
[I-D.ietf-core-observe] MAY be used to observe any changes in a
resource, and receive asynchronous notifications as a result. In
addition, a set of query string parameters are defined here to allow
a client to request how often a client is interested in receiving
notifications and how much a resource should change for the new
representation to be interesting. These query parameters are
described in the following table. A resource using an interface
description defined in this specification and marked as Observable in
its link description SHOULD support these observation parameters.
The Change Step parameter can only be supported on resources with an
atomic numeric value.
+--------------------+-----------+------------------+
| Query | Parameter | Value |
+--------------------+-----------+------------------+
| Minimum Period (s) | pmin | xsd:integer (>0) |
| Maximum Period (s) | pmax | xsd:integer (>0) |
| Change Step | st | xsd:decimal (>0) |
+--------------------+-----------+------------------+
Minimum Period: When present, the minimum period indicates the
minimum time in seconds the server SHOULD wait between sending
notifications. In the absence of this parameter, the minimum
period is up to the server.
Maximum Period: When present, the maximum period indicated the
maximum time in seconds the server SHOULD wait between sending
notifications (regardless if it has changed). In the absence of
this parameter, the maximum period is up to the server. The
maximum period MUST be great than the minimum period parameter (if
present).
Change Step: When present, the change step indicates how much the
value of a resource SHOULD change before sending a new
notification (compared to the value of the last notification).
This parameter has lower priority than the period parameters, thus
even if the change step has been fulfilled, the time since the
last notification SHOULD be between pmin and pmax.
The following example shows an Observation request using these query
parameters. Here the value of Observe indicates the number of
seconds since the observation was made to show the time.
Shelby & Vial Expires September 8, 2012 [Page 12]
Internet-Draft CoRE Interfaces March 2012
Req: GET Observe /s/temp?pmin=10&pmax=60&st=1
Res: 2.05 Content Observe:0 (text/plain)
23.2
Res: 2.05 Content Observe:60 (text/plain)
23.0
Res: 2.05 Content Observe:80 (text/plain)
22.2
Res: 2.05 Content Observe:140 (text/plain)
21.8
4.9. Future Interfaces
It is expected that further interface descriptions will be defined in
this and other specifications. Potential interfaces to be considered
for this specifications include:
Collection: This resource would be a container that allows sub-
resources to be added or removed.
4.10. WADL Description
This section defines the formal Web Application Description Langauge
(WADL) definition of these CoRE interface descriptions.
<?xml version="1.0" standalone="yes"?>
<application xmlns="http://research.sun.com/wadl/2006/10"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:senml="urn:ietf:params:xml:ns:senml">
<grammars>
<include href="http://tools.ietf.org/html/draft-jennings-senml"/>
</grammars>
<doc title="CoRE Interfaces"/>
<resource_type id="s">
<doc title="Sensor resource type"/>
<method href="#read"/>
<method href="#observe"/>
</resource_type>
<resource_type id="p">
Shelby & Vial Expires September 8, 2012 [Page 13]
Internet-Draft CoRE Interfaces March 2012
<doc title="Parameter resource type"/>
<method href="#read"/>
<method href="#observe"/>
<method href="#update"/>
</resource_type>
<resource_type id="rp">
<doc title="Read-only Parameter resource type"/>
<method href="#read"/>
<method href="#observe"/>
</resource_type>
<resource_type id="a">
<doc title="Actuator resource type"/>
<method href="#read"/>
<method href="#observe"/>
<method href="#update"/>
<method href="#toggle"/>
</resource_type>
<resource_type id="ll">
<doc title="Link List type"/></doc>
<method href="#listLinks"/>
</resource_type>
<resource_type id="b">
<doc title="Batch of sub-resources type">The methods read,
observe, update and toggle are applied to each sub-
resource of the requested resource that supports it. Mixed
sub-resource types can be supported.</doc>
<method href="#read"/>
<method href="#observe"/>
<method href="#update"/>
<method href="#toggle"/>
<method href="#listLinks"/>
</resource_type>
<resource_type id="lb">
<doc title="Linked Batch resource type">. The methods read,
obervableRead, update and toggle are applied to each linked
resource of the requested resource that supports it. Mixed
linked resource types can be supported.</doc>
<method href="#read"/>
<method href="#observe"/>
<method href="#update"/>
<method href="#listLinks"/>
<method href="#appendLinks"/>
<method href="#clearLinks"/>
Shelby & Vial Expires September 8, 2012 [Page 14]
Internet-Draft CoRE Interfaces March 2012
</resource_type>
<method id="read" name="GET">
<doc>Retrieve the value of a sensor, an actuator or a parameter.
Both HTTP and CoAP support this method.</doc>
<request>
</request>
<response status="200">
<representation mediaType="text/plain"/>
<representation mediaType="application/senml+exi"/>
<representation mediaType="application/senml+xml"/>
<representation mediaType="application/senml+json"/>
</response>
<response status="2.05">
<representation mediaType="text/plain"/>
<representation mediaType="application/senml+exi"/>
<representation mediaType="application/senml+xml"/>
<representation mediaType="application/senml+json"/>
</response>
</method>
<method id="observe" name="GET">
<doc>Observe the value of a sensor, an actuator or a parameter.
Only CoAP supports this method since it requires the CoRE
Observe mechanism.</doc>
<request>
<param name="pmin" style="query" type="xsd:integer"/>
<param name="pmax" style="query" type="xsd:integer"/>
<param name="st" style="query" type="xsd:decimal"/>
</request>
<response status="2.05">
<representation mediaType="text/plain"/>
<representation mediaType="application/senml+exi"/>
<representation mediaType="application/senml+xml"/>
<representation mediaType="application/senml+json"/>
</response>
</method>
<method id="update" name="PUT">
<doc>Control the actuator or update a parameter with a new value
or command. Both HTTP and CoAP support this method.</doc>
<request>
<representation mediaType="text/plain"/>
<representation mediaType="application/senml+exi"/>
<representation mediaType="application/senml+xml"/>
<representation mediaType="application/senml+json"/>
</request>
<response status="200"/>
Shelby & Vial Expires September 8, 2012 [Page 15]
Internet-Draft CoRE Interfaces March 2012
<response status="2.04"/>
</method>
<method id="toggle" name="POST">
<doc>Toggle the values of actuator resources. Both HTTP and CoAP
support this method.</doc>
<request>
<doc>The toggle function is only applicable if the request
is empty.</doc>
</request>
<response status="200"/>
<response status="2.04"/>
</method>
<method id="listLinks" name="GET">
<doc>Retrieve the list of Web links associated to a resource.
Both HTTP and CoAP support this method.</doc>
<request>
<doc>This request MUST contain an Accept option with
application/link-format when the resource supports
other GET methods.</doc>
</request>
<response status="200">
<representation mediaType="application/link-format"/>
</response>
<response status="2.05">
<representation mediaType="application/link-format"/>
</response>
</method>
<method id="appendLinks" name="POST">
<doc>Append new Web links to a resource which is a collection
of links. Both HTTP and CoAP support this method.</doc>
<request>
<representation mediaType="application/link-format"/>
</request>
<response status="200"/>
<response status="2.04"/>
</method>
<method id="clearLinks" name="DELETE">
<doc>Clear all Web Links in a resource which is a collection
of links. Both HTTP and CoAP support this method.</doc>
<request>
</request>
<response status="200"/>
<response status="2.04"/>
</method>
Shelby & Vial Expires September 8, 2012 [Page 16]
Internet-Draft CoRE Interfaces March 2012
</application>
5. Security Considerations
An implementation of a client needs to be prepared to deal with
responses to a request that differ from what is specified in this
document. A server implementing what the client thinks is a resource
with one of these interface descriptions could return malformed
representations and response codes either by accident or maliciously.
A server sending maliciously malformed responses could attempt to
take advantage of a poorly implemented client for example to crash
the node or perform denial of service.
6. IANA Considerations
To be determined if a registry of interface descriptions should be
created for CoRE, allowing other interface descriptions to be
registered by other specifications (and if this document is the place
to create such a registry).
7. Acknowledgments
Acknowledgement is given to colleagues from the SENSEI project who
were critical in the initial development of the well-known REST
interface concept, to members of the IPSO Alliance where further
requirements for interface types have been discussed, and to Szymon
Sasin, Cedric Chauvenet, Daniel Gavelle and Carsten Bormann who have
provided useful discussion and input to the concepts in this
document.
8. Changelog
Changes from -01 to -02
o Defined a Function Set and its guidelines.
o Added the Link List interface.
o Added the Linked Batch interface.
o Improved the WADL interface definition.
Shelby & Vial Expires September 8, 2012 [Page 17]
Internet-Draft CoRE Interfaces March 2012
o Added a simple profile example.
9. References
9.1. Normative References
[I-D.ietf-core-link-format]
Shelby, Z., "CoRE Link Format",
draft-ietf-core-link-format-11 (work in progress),
January 2012.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC5988] Nottingham, M., "Web Linking", RFC 5988, October 2010.
9.2. Informative References
[I-D.cheshire-dnsext-dns-sd]
Cheshire, S. and M. Krochmal, "DNS-Based Service
Discovery", draft-cheshire-dnsext-dns-sd-11 (work in
progress), December 2011.
[I-D.ietf-core-coap]
Frank, B., Bormann, C., Hartke, K., and Z. Shelby,
"Constrained Application Protocol (CoAP)",
draft-ietf-core-coap-08 (work in progress), October 2011.
[I-D.ietf-core-observe]
Hartke, K., "Observing Resources in CoAP",
draft-ietf-core-observe-04 (work in progress),
February 2012.
[I-D.shelby-core-resource-directory]
Krco, S. and Z. Shelby, "CoRE Resource Directory",
draft-shelby-core-resource-directory-02 (work in
progress), October 2011.
Appendix A. Profile example
The following is a short definition of simple profile. This
simplistic profile is for use in the examples of this document.
Shelby & Vial Expires September 8, 2012 [Page 18]
Internet-Draft CoRE Interfaces March 2012
+--------------------+-----------+------------+---------+
| Function Set | Root Path | RT | IF |
+--------------------+-----------+------------+---------+
| Device Description | /d | simple:dev | core#ll |
| Sensors | /s | simple:sen | core#b |
| Actuators | /a | simple:act | core#b |
+--------------------+-----------+------------+---------+
List of Function Sets
+-------+----------+----------------+---------+------------+
| Type | Path | RT | IF | Data Type |
+-------+----------+----------------+---------+------------+
| Name | /d/name | simple:dev:n | core#p | xsd:string |
| Model | /d/model | simple:dev:mdl | core#rp | xsd:string |
+-------+----------+----------------+---------+------------+
Device Description Function Set
+-------------+-------------+----------------+--------+-------------+
| Type | Path | RT | IF | Data Type |
+-------------+-------------+----------------+--------+-------------+
| Light | /s/light | simple:sen:lt | core#s | xsd:decimal |
| | | | | (lux) |
| Humidity | /s/humidity | simple:sen:hum | core#s | xsd:decimal |
| | | | | (%RH) |
| Temperature | /s/temp | simple:sen:tmp | core#s | xsd:decimal |
| | | | | (degC) |
+-------------+-------------+----------------+--------+-------------+
Sensors Function Set
+------+------------+----------------+--------+-------------+
| Type | Path | RT | IF | Data Type |
+------+------------+----------------+--------+-------------+
| LED | /a/{#}/led | simple:act:led | core#a | xsd:boolean |
+------+------------+----------------+--------+-------------+
Actuators Function Set
Shelby & Vial Expires September 8, 2012 [Page 19]
Internet-Draft CoRE Interfaces March 2012
Authors' Addresses
Zach Shelby
Sensinode
Kidekuja 2
Vuokatti 88600
FINLAND
Phone: +358407796297
Email: zach@sensinode.com
Matthieu Vial
Schneider-Electric
Grenoble,
FRANCE
Phone: +33 (0)47657 6522
Email: matthieu.vial@schneider-electric.com
Shelby & Vial Expires September 8, 2012 [Page 20]