PCE WG Quan Xiong
Internet-Draft Fangwei Hu
Intended status: Standards Track Greg Mirsky
Expires: June 13, 2019 ZTE Corporation
Weiqiang Cheng
China Mobile
Dec 10, 2018
Stateful PCE for SR-MPLS-TP Inter-domain
draft-xiong-pce-stateful-pce-sr-inter-domain-00
Abstract
This document proposes two solutions to perform the Segment routing
transport Profile with MPLS data plane(SR-MPLS-TP) inter-domain path
computation and initiation with stateful PCEs including stitching
Association Group and stitching labels.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on June 13, 2019.
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
Quan Xiong, et al. Expires June 13, 2019 [Page 1]
Internet-Draft Stateful PCE for SR-MPLS-TP Inter-domain Dec 2018
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Requirements Language . . . . . . . . . . . . . . . . . . 3
1.2. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3
2. The SR-MPLS-TP Inter-domain with PCE . . . . . . . . . . . . 3
2.1. The Stitching LSP Association Solution . . . . . . . . . 5
2.2. The Stitching Label Solution . . . . . . . . . . . . . . 6
3. Inter-domain Path Segment Allocation . . . . . . . . . . . . 6
3.1. PCC Allocated . . . . . . . . . . . . . . . . . . . . . . 6
3.2. PCE Allocated . . . . . . . . . . . . . . . . . . . . . . 7
4. PCEP Procedure . . . . . . . . . . . . . . . . . . . . . . . 7
4.1. HPCE-initiated LSP . . . . . . . . . . . . . . . . . . . 7
4.2. PCC-initiated LSP . . . . . . . . . . . . . . . . . . . . 8
5. Security Considerations . . . . . . . . . . . . . . . . . . . 8
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 8
7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 9
8. References . . . . . . . . . . . . . . . . . . . . . . . . . 9
8.1. Informative References . . . . . . . . . . . . . . . . . 9
8.2. Normative References . . . . . . . . . . . . . . . . . . 9
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 11
1. Introduction
The Path Computation Element (PCE) architecture is defined in
[RFC4655] for MPLS Traffic Engineering (MPLS-TE) and Generalized MPLS
(GMPLS) networks. The Path Computation Element Communication
Protocol (PCEP) defined in [RFC5440] provides mechanisms for PCEs to
perform path computations in response to Path Computation Clients
(PCCs) requests.
[I-D.ietf-pce-segment-routing] proposes extensions to PCEP that allow
a stateful PCE to compute TE paths in segment routing (SR) networks.
As defined in [I-D.cheng-spring-mpls-path-segment], a path segment is
used to identify a SR path and support bidirectional SR paths
correlation. [I-D.xiong-pce-pcep-extension-sr-tp] proposed a
mechanism to create the bidirectional SR tunnel in a single SR
domain. [I-D.hu-mpls-sr-inter-domain-use-cases] defined a inter-
domain path segment and related inter-domain use cases for Segment
Routing in MPLS Transport Profile (SR-MPLS-TP) networks. It is
required to perform the SR inter-domain path computation and
initiation with PCE deployment.
The path computation requirments for Label Switched Paths (LSPs)
across multiple domains are discussed in [RFC4105] and [RFC4216].
Quan Xiong, et al. Expires June 13, 2019 [Page 2]
Internet-Draft Stateful PCE for SR-MPLS-TP Inter-domain Dec 2018
Inter-domain path computation can be performed by a single stateful
PCE and multiple stateful PCEs. The PCE may has no ability to
collect the topologies all over the domains. So the single PCE model
is not applied in deployment. Three multiple PCEs models can be uesd
to perform PCE-based inter-domain path computation including Per-
Domain Path Computation [RFC5152], Backward-Recursive PCE-Based
Computation (BRPC) [RFC5441] and Hierarchical PCE (H-PCE) [RFC6805].
Computing the optimum inter-domain path requires co-operation between
multiple PCEs. But the sequence of domains need to be known before
the path computation in BRPC mechanism. Stateful H-PCE architecture
is appropriate to compute an optimal end-to-end path across multiple
domains.
As defined in [I-D.hu-mpls-sr-inter-domain-use-cases], two SR-MPLS-TP
inter-domain models includes stitching and nesting inter-domain
models. This document proposes two solutions to perform the SR-MPLS-
TP inter-domain path computation and initiation with stateful PCEs
including stitching LSPs Association and stitching labels.
1.1. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
1.2. Terminology
The terminology is defined as [RFC5440],
[I-D.ietf-pce-segment-routing] ,
[I-D.cheng-spring-mpls-path-segment].
2. The SR-MPLS-TP Inter-domain with PCE
The SR-MPLS-TP stitching inter-domain scenario is described in
[I-D.hu-mpls-sr-inter-domain-use-cases]. The SR nodes belong to
three Autonomous Systems (AS) including SR-AS1, SR-AS2 and SR-AS3
which connecting with logical links or border nodes as the Figure 1
shown. The SR inter-domain LSP needs to be provided along the inter-
AS paths. The Path 1~5 are forwarding path segments and Path 1'~5'
are the related reverse path segments and these are all inter-domain
path segments.
Quan Xiong, et al. Expires June 13, 2019 [Page 3]
Internet-Draft Stateful PCE for SR-MPLS-TP Inter-domain Dec 2018
+-------+
+------------------+ H-PCE +-------------------+
| +---+---+ |
| | |
v v v
+--+--+ +--+--+ +--+--+
|PCE-1| |PCE-2| |PCE-3|
+--+--+ +--+--+ +--+--+
| | |
v v v
SR Border Node Network:
.................. ................. ....................
. . . . . .
+-----+ +-----+ +-----+ +-----+
| A | | X | | Y | | Z |
+-----+ +-----+ +-----+ +-----+
. SR-AS1 . . SR-AS2 . . SR-AS3 .
.................. ................. ....................
Forwarding Path Segments:
|------Path1------->|-----Path2------->|--------Path3------>|
Reverse Path Segments:
|<-----Path1'-------|<----Path2'-------|<--------Path3'-----|
SR Border Link Network:
.................... .................... .....................
. . . . . .
. +---+ +---+ . . +---+ +---+ . . +---+ +----+ .
. | A |------| B |-------| C |-----| X |---------| Y |-----| Z | .
. +---+ +---+ . . +---+ +---+ . . +---+ +----+ .
. SR-AS1 . . SR-AS2 . . SR-AS3 .
.................... .................... .....................
Forwarding Path Segments:
|----Path1---->|-Path2-->|----Path3--->|-Path4-->|-----Path5------>|
Reverse Path Segments:
|<---Path1'----|<-Path2'-|<---Path3'---|<-Path4'-|<----Path5'------|
Figure 1 The SR Stitching Inter-Domain with H-PCE
The hierarchical PCE architecture is described in [RFC6805], a parent
PCE maintains a domain topology map that contains the child domains
(seen as vertices in the topology) and their interconnections (links
in the topology) but no information about the content of the child
domains. Each child domain has one PCE taking in charge of computing
paths across its own domain. These PCEs are known as child PCEs and
have a relationship with the parent PCE. As the Figure 1 shown,
Quan Xiong, et al. Expires June 13, 2019 [Page 4]
Internet-Draft Stateful PCE for SR-MPLS-TP Inter-domain Dec 2018
H-PCE is parent PCE and PCE-1, PCE-2 and PCE-3 are child PCEs which
is responsible for each own SR-AS.
When an optimal inter-domain path is required, the ingress PCE sends
a request to the parent PCE or the stateful parent PCE itself to
initiate the path computation. The parent PCE selects a set of
candidate domain paths based on the domain topology and the state of
the inter-domain links. It then sends computation requests to the
child PCEs responsible for each of the domains on the candidate
domain paths. The stateful child PCE in each domain performs active
stateful procedure as defined [RFC8231].
2.1. The Stitching LSP Association Solution
The LSPs of multiple domains can be stitched together by adding them
to a stitching LSP association group as defined in [I-D.hu-pce-
stitching-lsp-association]. As the Figure 2 shown, the stateful
H-PCE sends the PCInit message defined in [RFC8281] to initiate the
inter-domain path computation adding the forwarding LSP 1~3 to
Assoc#1 and reverse LSP 1'~3' to Assoc#2. The child PCEs may
initiate the intra-domain LSPs when receiving the message from parent
PCE.
+-------+
+------------------+ H-PCE +-----------------+
PCInit | +---+---+ |
(LSP1,Assoc#1) | PCInit(LSP2,Assoc#1)| PCInit(LSP3,Assoc#1)|
PCInit | PCInit(LSP2',Assoc#2 |PCInit(LSP3',Assoc#2 |
(LSP1',Assoc#2)| | |
v v v
+-----+ +-----+ +-----+
|PCE-1| |PCE-2| |PCE-3|
+-----+ +-----+ +-----+
PCInit/ \PCInit PCInit/ \PCInit PCInit/ \PCInit
LSP1/ \LSP1' LSP2/ \LSP2' LSP3/ \LSP3'
Assoc#1/ \Assoc#2 Assoc#1/ \Assoc#2 Assoc#1/ \Assoc#2
v v v v v v
+-----+ LSP1 +-----------+ LSP2 +-----------+ LSP3 +-----+
| A |-------->| X |--------->| Y |-------->| Z |
| |<--------| |<---------| |<--------| |
+-----+ LSP1' +-----------| LSP2' +-----------+ LSP3' +-----+
Figure 2 The SR inter-domain Stitching LSP Association
Quan Xiong, et al. Expires June 13, 2019 [Page 5]
Internet-Draft Stateful PCE for SR-MPLS-TP Inter-domain Dec 2018
2.2. The Stitching Label Solution
This section defined the inter-domain path segments as stitching
Labels which used to stitch per-domain LSP tunnels in order to form
inter-domain path that cross multiple domains.
SR intra-domain path is setup as part of inter-domain SR path. When
PCC requests the PCE or the PCE itself to initiate The SR path, the
inter-domain path segments should be carried as a stitching Label
with the associated link.
+-------+
+------------------+ H-PCE +-----------------+
PCInit | +---+---+ |
(LSP1,LSP1')| PCInit(LSP2,LSP2')| PCInit(LSP3,LSP3')|
SL1,SL1' | SL1,SL1',SL2,SL2' | SL2,SL2' |
v v v
.................... .................... .....................
. . . . . .
. +---+ LSP1 +---+ . . +---+ LSP2+---+ . . +---+ LSP3+----+ .
. | A |----->| B |--SL1->| C |---->| X |---SL2-->| Y |---->| Z | .
. | |<-----| |<-SL1'-| |<----| |<--SL2'--| |<----| | .
. +---+ LSP1'+---+ . . +---+LSP2'+---+ . . +---+LSP3'+----+ .
. SR-AS1 . . SR-AS2 . . SR-AS3 .
.................... .................... .....................
SL:Stiching Label
Figure 3 The SR Inter-Domain Stitching Label
3. Inter-domain Path Segment Allocation
The inter-domain path segment may be allocated by PCC or PCE. The
PCE may be the single domain PCE which taking in charge of the
respective domain. The inter-domain path segments is a unique value
in the domain which PCC or PCE belongs to. The mechanism of path
segment request and reply may be the same with that in single domain
as defined in [I-D.xiong-pce-pcep-extension-sr-tp].
3.1. PCC Allocated
As defined in [I-D.hu-mpls-sr-inter-domain-use-cases], an inter-
domain path segment can be allocated by egress PCC and may be
maintained on the PCC itself. The inter-domain path segment connects
two domains and the ingress and egress PCC are belong to different
Quan Xiong, et al. Expires June 13, 2019 [Page 6]
Internet-Draft Stateful PCE for SR-MPLS-TP Inter-domain Dec 2018
domains. The ingress and egress PCC need to exchange messages which
carrying path segment information between the two PCEs.
The Ingress PCC may request to allocate a path segment from egress
PCC. Once egress PCC allocated the inter-domain path segment, it
need to inform the PCE in respective domain with the PCRpt message.
The PCE need to communicate with the PCE which the ingress PCC
belongs to inform the value allocated.
3.2. PCE Allocated
The ingress PCC may request the inter-domain path segment to be
allocated by the PCE in PCC-Initiated LSP. The PCE may allocate the
inter-domain path segment on its own domain in PCEs-Initiated LSP.
The allocated path segment needs to be informed to the ingress and
egress PCC.
The inter-domain path segments may be allocated separately by the
PCEs which control the ingress and egress PCC along with the LSP
initiation.
4. PCEP Procedure
[RFC8281] describes setup, maintenance and teardown of PCE-initiated
LSPs under the stateful PCE model, without the need for local
configuration on the PCC. Similar to LSP updation, the inter-domain
LSP can be initiated by the ingress PCE using the PCInitiate message
to the ingress LSR. The inter-domain path segment is viewed as
stitching label. Per-domain LSP may also be initiated by respective
domain's PCE and stitched together.
4.1. HPCE-initiated LSP
In H-PCE [RFC6805] architecture, the parent PCE is used to compute a
multi-domain path based on the domain connectivity information. The
stateful H-PCE in active model can be used to initiate the inter-
domain bidirectional path for SR networks. PCE sends PCInitiate
message to its domain SR nodes with ERO={SID LIST} and carrying
stitching association group TLV and path segments. If the SR nodes
is the border nodes of the SR domain, it correlates the two path
segments and the related SID list if the related association ID is
the same value.
The PECP procedure for the HPCE-initiated LSP is following:
The stateful H-PCE initiates the end-to-end path computation across
multiple domains and selects a set of candidate domain paths based on
the topology.
Quan Xiong, et al. Expires June 13, 2019 [Page 7]
Internet-Draft Stateful PCE for SR-MPLS-TP Inter-domain Dec 2018
The stateful H-PCE sends PCInitiate message to every PCEs which the
end-to-end path traversed, carrying inter-domain path segments
allocated by H-PCE, stitching LSP association group and the SID list
in the ERO object.
The stateful child PCE in each domain perform active stateful
procedure as defined in [I-D.xiong-pce-pcep-extension-sr-tp].
4.2. PCC-initiated LSP
In case of passive path computation request to the ingress PCE from
the ingress LSR, the H-PCE path computation procedure is applied to
compute sequence of domains or end-to-end path by using PCReq and
PCRep messages among stateful PCEs in passive mode.
In case of delegation to the ingress PCE (active stateful PCE), the
ingress child PCE may further delegate to parent PCE as per
[I-D.ietf-pce-stateful-hpce]. The parent PCE could update the path
of the inter-domain LSP.
The ingress nodes of the source AS sends the PCReq message to its
PCE, then the PCE sends PCReq message to the H-PCE or stateful PCEs
in other domains. The PECP procedure for the PCC-initiated LSP in
H-PCE model is as follow.
The ingress PCC from the ingress domain sends a PCReq request to the
PCE which is responsible for the domain containing the destination
information.
The ingress PCE sends the path computation request direct to the
parent PCE.
The parent PCE computes the optimal end-to-end path and initiates the
inter-domain paths to the child PCEs which the path traversed.
Each PCE sends PCInitiate message to ingress or egress nodes of its
domain to initiate the LSPs.
5. Security Considerations
TBD.
6. IANA Considerations
TBD.
Quan Xiong, et al. Expires June 13, 2019 [Page 8]
Internet-Draft Stateful PCE for SR-MPLS-TP Inter-domain Dec 2018
7. Acknowledgements
TBD.
8. References
8.1. Informative References
[RFC6805] King, D., Ed. and A. Farrel, Ed., "The Application of the
Path Computation Element Architecture to the Determination
of a Sequence of Domains in MPLS and GMPLS", RFC 6805,
DOI 10.17487/RFC6805, November 2012,
<https://www.rfc-editor.org/info/rfc6805>.
8.2. Normative References
[I-D.cheng-spring-mpls-path-segment]
Cheng, W., Wang, L., Li, H., Chen, M., Gandhi, R., Zigler,
R., and S. Zhan, "Path Segment in MPLS Based Segment
Routing Network", draft-cheng-spring-mpls-path-segment-03
(work in progress), October 2018.
[I-D.hu-mpls-sr-inter-domain-use-cases]
hu, f., Xiong, Q., Mirsky, G., and W. Cheng, "Segment
Routing in MPLS-TP Inter-domain Use Cases", draft-hu-mpls-
sr-inter-domain-use-cases-00 (work in progress), December
2018.
[I-D.ietf-pce-association-bidir]
Barth, C., Gandhi, R., and B. Wen, "PCEP Extensions for
Associated Bidirectional Label Switched Paths (LSPs)",
draft-ietf-pce-association-bidir-02 (work in progress),
November 2018.
[I-D.ietf-pce-segment-routing]
Sivabalan, S., Filsfils, C., Tantsura, J., Henderickx, W.,
and J. Hardwick, "PCEP Extensions for Segment Routing",
draft-ietf-pce-segment-routing-14 (work in progress),
October 2018.
[I-D.ietf-pce-stateful-hpce]
Dhody, D., Lee, Y., Ceccarelli, D., Shin, J., King, D.,
and O. Dios, "Hierarchical Stateful Path Computation
Element (PCE).", draft-ietf-pce-stateful-hpce-06 (work in
progress), October 2018.
Quan Xiong, et al. Expires June 13, 2019 [Page 9]
Internet-Draft Stateful PCE for SR-MPLS-TP Inter-domain Dec 2018
[I-D.xiong-pce-pcep-extension-sr-tp]
Xiong, Q., hu, f., and S. Zhan, "PCEP extensions for SR
MPLS-TP", draft-xiong-pce-pcep-extension-sr-tp-02 (work in
progress), October 2018.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC4105] Le Roux, J., Ed., Vasseur, J., Ed., and J. Boyle, Ed.,
"Requirements for Inter-Area MPLS Traffic Engineering",
RFC 4105, DOI 10.17487/RFC4105, June 2005,
<https://www.rfc-editor.org/info/rfc4105>.
[RFC4216] Zhang, R., Ed. and J. Vasseur, Ed., "MPLS Inter-Autonomous
System (AS) Traffic Engineering (TE) Requirements",
RFC 4216, DOI 10.17487/RFC4216, November 2005,
<https://www.rfc-editor.org/info/rfc4216>.
[RFC4655] Farrel, A., Vasseur, J., and J. Ash, "A Path Computation
Element (PCE)-Based Architecture", RFC 4655,
DOI 10.17487/RFC4655, August 2006,
<https://www.rfc-editor.org/info/rfc4655>.
[RFC5152] Vasseur, JP., Ed., Ayyangar, A., Ed., and R. Zhang, "A
Per-Domain Path Computation Method for Establishing Inter-
Domain Traffic Engineering (TE) Label Switched Paths
(LSPs)", RFC 5152, DOI 10.17487/RFC5152, February 2008,
<https://www.rfc-editor.org/info/rfc5152>.
[RFC5440] Vasseur, JP., Ed. and JL. Le Roux, Ed., "Path Computation
Element (PCE) Communication Protocol (PCEP)", RFC 5440,
DOI 10.17487/RFC5440, March 2009,
<https://www.rfc-editor.org/info/rfc5440>.
[RFC5441] Vasseur, JP., Ed., Zhang, R., Bitar, N., and JL. Le Roux,
"A Backward-Recursive PCE-Based Computation (BRPC)
Procedure to Compute Shortest Constrained Inter-Domain
Traffic Engineering Label Switched Paths", RFC 5441,
DOI 10.17487/RFC5441, April 2009,
<https://www.rfc-editor.org/info/rfc5441>.
[RFC8231] Crabbe, E., Minei, I., Medved, J., and R. Varga, "Path
Computation Element Communication Protocol (PCEP)
Extensions for Stateful PCE", RFC 8231,
DOI 10.17487/RFC8231, September 2017,
<https://www.rfc-editor.org/info/rfc8231>.
Quan Xiong, et al. Expires June 13, 2019 [Page 10]
Internet-Draft Stateful PCE for SR-MPLS-TP Inter-domain Dec 2018
[RFC8281] Crabbe, E., Minei, I., Sivabalan, S., and R. Varga, "Path
Computation Element Communication Protocol (PCEP)
Extensions for PCE-Initiated LSP Setup in a Stateful PCE
Model", RFC 8281, DOI 10.17487/RFC8281, December 2017,
<https://www.rfc-editor.org/info/rfc8281>.
Authors' Addresses
Quan Xiong
ZTE Corporation
No.6 Huashi Park Rd
Wuhan, Hubei 430223
China
Phone: +86 27 83531060
Email: xiong.quan@zte.com.cn
Fangwei Hu
ZTE Corporation
No.889 Bibo Rd
Shanghai 201203
China
Phone: +86 21 68896273
Email: hu.fangwei@zte.com.cn
Greg Mirsky
ZTE Corporation
USA
Email: gregimirsky@gmail.com
Weiqiang Cheng
China Mobile
Beijing
China
Email: chengweiqiang@chinamobile.com
Quan Xiong, et al. Expires June 13, 2019 [Page 11]