Internet Engineering Task Force A. Wright, Ed.
Internet-Draft
Intended status: Informational H. Andrews, Ed.
Expires: September 20, 2018 Cloudflare, Inc.
G. Luff
March 19, 2018
JSON Schema Validation: A Vocabulary for Structural Validation of JSON
draft-handrews-json-schema-validation-01
Abstract
JSON Schema (application/schema+json) has several purposes, one of
which is JSON instance validation. This document specifies a
vocabulary for JSON Schema to describe the meaning of JSON documents,
provide hints for user interfaces working with JSON data, and to make
assertions about what a valid document must look like.
Note to Readers
The issues list for this draft can be found at <https://github.com/
json-schema-org/json-schema-spec/issues>.
For additional information, see <http://json-schema.org/>.
To provide feedback, use this issue tracker, the communication
methods listed on the homepage, or email the document editors.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on September 20, 2018.
Wright, et al. Expires September 20, 2018 [Page 1]
Internet-Draft JSON Schema Validation March 2018
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Conventions and Terminology . . . . . . . . . . . . . . . . . 4
3. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.1. Applicability . . . . . . . . . . . . . . . . . . . . . . 5
3.1.1. Keyword Independence . . . . . . . . . . . . . . . . 5
3.2. Assertions . . . . . . . . . . . . . . . . . . . . . . . 5
3.2.1. Assertions and Instance Primitive Types . . . . . . . 6
3.3. Annotations . . . . . . . . . . . . . . . . . . . . . . . 6
3.3.1. Annotations and Validation Outcomes . . . . . . . . . 7
3.3.2. Annotations and Short-Circuit Validation . . . . . . 7
4. Interoperability Considerations . . . . . . . . . . . . . . . 7
4.1. Validation of String Instances . . . . . . . . . . . . . 7
4.2. Validation of Numeric Instances . . . . . . . . . . . . . 7
4.3. Regular Expressions . . . . . . . . . . . . . . . . . . . 7
5. Meta-Schema . . . . . . . . . . . . . . . . . . . . . . . . . 8
6. Validation Keywords . . . . . . . . . . . . . . . . . . . . . 8
6.1. Validation Keywords for Any Instance Type . . . . . . . . 8
6.1.1. type . . . . . . . . . . . . . . . . . . . . . . . . 8
6.1.2. enum . . . . . . . . . . . . . . . . . . . . . . . . 9
6.1.3. const . . . . . . . . . . . . . . . . . . . . . . . . 9
6.2. Validation Keywords for Numeric Instances (number and
integer) . . . . . . . . . . . . . . . . . . . . . . . . 9
6.2.1. multipleOf . . . . . . . . . . . . . . . . . . . . . 9
6.2.2. maximum . . . . . . . . . . . . . . . . . . . . . . . 9
6.2.3. exclusiveMaximum . . . . . . . . . . . . . . . . . . 9
6.2.4. minimum . . . . . . . . . . . . . . . . . . . . . . . 10
6.2.5. exclusiveMinimum . . . . . . . . . . . . . . . . . . 10
6.3. Validation Keywords for Strings . . . . . . . . . . . . . 10
6.3.1. maxLength . . . . . . . . . . . . . . . . . . . . . . 10
6.3.2. minLength . . . . . . . . . . . . . . . . . . . . . . 10
6.3.3. pattern . . . . . . . . . . . . . . . . . . . . . . . 10
Wright, et al. Expires September 20, 2018 [Page 2]
Internet-Draft JSON Schema Validation March 2018
6.4. Validation Keywords for Arrays . . . . . . . . . . . . . 11
6.4.1. items . . . . . . . . . . . . . . . . . . . . . . . . 11
6.4.2. additionalItems . . . . . . . . . . . . . . . . . . . 11
6.4.3. maxItems . . . . . . . . . . . . . . . . . . . . . . 11
6.4.4. minItems . . . . . . . . . . . . . . . . . . . . . . 12
6.4.5. uniqueItems . . . . . . . . . . . . . . . . . . . . . 12
6.4.6. contains . . . . . . . . . . . . . . . . . . . . . . 12
6.5. Validation Keywords for Objects . . . . . . . . . . . . . 12
6.5.1. maxProperties . . . . . . . . . . . . . . . . . . . . 12
6.5.2. minProperties . . . . . . . . . . . . . . . . . . . . 12
6.5.3. required . . . . . . . . . . . . . . . . . . . . . . 13
6.5.4. properties . . . . . . . . . . . . . . . . . . . . . 13
6.5.5. patternProperties . . . . . . . . . . . . . . . . . . 13
6.5.6. additionalProperties . . . . . . . . . . . . . . . . 14
6.5.7. dependencies . . . . . . . . . . . . . . . . . . . . 14
6.5.8. propertyNames . . . . . . . . . . . . . . . . . . . . 15
6.6. Keywords for Applying Subschemas Conditionally . . . . . 15
6.6.1. if . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.6.2. then . . . . . . . . . . . . . . . . . . . . . . . . 16
6.6.3. else . . . . . . . . . . . . . . . . . . . . . . . . 16
6.7. Keywords for Applying Subschemas With Boolean Logic . . . 16
6.7.1. allOf . . . . . . . . . . . . . . . . . . . . . . . . 16
6.7.2. anyOf . . . . . . . . . . . . . . . . . . . . . . . . 16
6.7.3. oneOf . . . . . . . . . . . . . . . . . . . . . . . . 17
6.7.4. not . . . . . . . . . . . . . . . . . . . . . . . . . 17
7. Semantic Validation With "format" . . . . . . . . . . . . . . 17
7.1. Foreword . . . . . . . . . . . . . . . . . . . . . . . . 17
7.2. Implementation Requirements . . . . . . . . . . . . . . . 17
7.3. Defined Formats . . . . . . . . . . . . . . . . . . . . . 18
7.3.1. Dates and Times . . . . . . . . . . . . . . . . . . . 18
7.3.2. Email Addresses . . . . . . . . . . . . . . . . . . . 18
7.3.3. Hostnames . . . . . . . . . . . . . . . . . . . . . . 19
7.3.4. IP Addresses . . . . . . . . . . . . . . . . . . . . 19
7.3.5. Resource Identifiers . . . . . . . . . . . . . . . . 19
7.3.6. uri-template . . . . . . . . . . . . . . . . . . . . 20
7.3.7. JSON Pointers . . . . . . . . . . . . . . . . . . . . 20
7.3.8. regex . . . . . . . . . . . . . . . . . . . . . . . . 20
8. String-Encoding Non-JSON Data . . . . . . . . . . . . . . . . 21
8.1. Foreword . . . . . . . . . . . . . . . . . . . . . . . . 21
8.2. Implementation Requirements . . . . . . . . . . . . . . . 21
8.3. contentEncoding . . . . . . . . . . . . . . . . . . . . . 21
8.4. contentMediaType . . . . . . . . . . . . . . . . . . . . 21
8.5. Example . . . . . . . . . . . . . . . . . . . . . . . . . 22
9. Schema Re-Use With "definitions" . . . . . . . . . . . . . . 22
10. Schema Annotations . . . . . . . . . . . . . . . . . . . . . 23
10.1. "title" and "description" . . . . . . . . . . . . . . . 23
10.2. "default" . . . . . . . . . . . . . . . . . . . . . . . 23
10.3. "readOnly" and "writeOnly" . . . . . . . . . . . . . . . 24
Wright, et al. Expires September 20, 2018 [Page 3]
Internet-Draft JSON Schema Validation March 2018
10.4. "examples" . . . . . . . . . . . . . . . . . . . . . . . 24
11. Security Considerations . . . . . . . . . . . . . . . . . . . 25
12. References . . . . . . . . . . . . . . . . . . . . . . . . . 25
12.1. Normative References . . . . . . . . . . . . . . . . . . 25
12.2. Informative References . . . . . . . . . . . . . . . . . 27
Appendix A. Acknowledgments . . . . . . . . . . . . . . . . . . 28
Appendix B. ChangeLog . . . . . . . . . . . . . . . . . . . . . 28
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 30
1. Introduction
JSON Schema can be used to require that a given JSON document (an
instance) satisfies a certain number of criteria. These criteria are
asserted by using keywords described in this specification. In
addition, a set of keywords is also defined to assist in interactive
user interface instance generation.
This specification will use the concepts, syntax, and terminology
defined by the JSON Schema core [json-schema] specification.
2. Conventions and Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
This specification uses the term "container instance" to refer to
both array and object instances. It uses the term "children
instances" to refer to array elements or object member values.
Elements in an array value are said to be unique if no two elements
of this array are equal [json-schema].
3. Overview
JSON Schema validation applies schemas to locations within the
instance, and asserts constraints on the structure of the data at
each location. An instance location that satisfies all asserted
constraints is then annotated with any keywords that contain non-
assertion information, such as descriptive metadata and usage hints.
If all locations within the instance satisfy all asserted
constraints, then the instance is said to be valid against the
schema.
Each schema object is independently evaluated against each instance
location to which it applies. This greatly simplifies the
implementation requirements for validators by ensuring that they do
Wright, et al. Expires September 20, 2018 [Page 4]
Internet-Draft JSON Schema Validation March 2018
not need to maintain state across the document-wide validation
process.
3.1. Applicability
Validation begins by applying the root schema to the complete
instance document. From there, various keywords are used to
determine which additional subschemas are applied to either the
current location, or a child location. These keywords also define
whether and how subschema assertion results are modified and/or
combined. Such keywords do not assert conditions on their own.
Rather, they control how assertions are applied and evaluated.
The keywords in the boolean logic (Section 6.7) and conditional
(Section 6.6) sections of this specification apply subschemas to the
same location as the parent schema. The former group defines boolean
operations on the subschema assertion results, while the latter
evaluates one subschema and uses its assertion results to determine
which of two other subschemas to apply as well.
Several keywords determine which subschemas are applied to array
items, object property values, and object property names. They are:
"items", "additionalItems", "contains", "properties",
"patternProperties", "additionalProperties", and "propertyNames".
The "contains" keyword only requires its subschema to be valid
against at least one child instance, while the other keywords require
that all subschemas are valid against all child instances to which
they apply.
3.1.1. Keyword Independence
Validation keywords typically operate independently, without
affecting each other's outcomes.
For schema author convenience, there are some exceptions among the
keywords that control subschema applicability:
"additionalProperties", whose behavior is defined in terms of
"properties" and "patternProperties"; and
"additionalItems", whose behavior is defined in terms of "items".
3.2. Assertions
Validation is a process of checking assertions. Each assertion adds
constraints that an instance must satisfy in order to successfully
validate.
Wright, et al. Expires September 20, 2018 [Page 5]
Internet-Draft JSON Schema Validation March 2018
Assertion keywords that are absent never restrict validation. In
some cases, this no-op behavior is identical to a keyword that exists
with certain values, and these values are noted where known.
All of the keywords in the general (Section 6.1), numeric
(Section 6.2), and string (Section 6.3) sections are assertions, as
well as "minItems", "maxItems", "uniqueItems", "minProperties",
"maxProperties", and "required". Additionally, "dependencies" is
shorthand for a combination of conditional and assertion keywords.
The "format", "contentType", and "contentEncoding" keywords can also
be implemented as assertions, although that functionality is an
optional part of this specification, and the keywords convey
additional non-assertion information.
3.2.1. Assertions and Instance Primitive Types
Most validation assertions only constrain values within a certain
primitive type. When the type of the instance is not of the type
targeted by the keyword, the instance is considered to conform to the
assertion.
For example, the "maxLength" keyword will only restrict certain
strings (that are too long) from being valid. If the instance is a
number, boolean, null, array, or object, then it is valid against
this assertion.
3.3. Annotations
In addition to assertions, this specification provides a small
vocabulary of metadata keywords that can be used to annotate the JSON
instance with useful information. The Section 7 and Section 8
keywords are also useful as annotations as well as being optional
assertions, as they convey additional usage guidance for the instance
data.
A schema that is applicable to a particular location in the instance,
against which the instance location is valid, attaches its
annotations to that location in the instance. Since many subschemas
can be applicable to any single location, annotation keywords need to
specify any unusual handling of multiple applicable occurrences of
the keyword with different values. The default behavior is simply to
collect all values.
Additional vocabularies SHOULD make use of this mechanism for
applying their own annotations to instances.
Wright, et al. Expires September 20, 2018 [Page 6]
Internet-Draft JSON Schema Validation March 2018
3.3.1. Annotations and Validation Outcomes
Annotations are collected whenever an instance is valid against a
schema object, and all of that schema object's parent schemas.
In particular, annotations in a subschema contained within a "not",
at any depth, including any number of intervening additional "not"
subschemas, MUST be ignored. If the instance was valid against the
"not" subschema, then by definition it is not valid against the
schema that contains the "not", so the "not" subschema's annotations
are not used.
Similarly, annotations within a failing branch of a "oneOf", "anyOf",
"then", or "else" MUST be ignored even when the instance successfully
validates against the complete schema document.
3.3.2. Annotations and Short-Circuit Validation
Annotation keywords MUST be applied to all possible sub-instances.
Even if such application can be short-circuited when only assertion
evaluation is needed. For instance, the "contains" keyword need only
be checked for assertions until at least one array item proves valid.
However, when working with annotations, all items in the array must
be evaluated to determine all items with which the annotations should
be associated.
4. Interoperability Considerations
4.1. Validation of String Instances
It should be noted that the nul character (\u0000) is valid in a JSON
string. An instance to validate may contain a string value with this
character, regardless of the ability of the underlying programming
language to deal with such data.
4.2. Validation of Numeric Instances
The JSON specification allows numbers with arbitrary precision, and
JSON Schema does not add any such bounds. This means that numeric
instances processed by JSON Schema can be arbitrarily large and/or
have an arbitrarily long decimal part, regardless of the ability of
the underlying programming language to deal with such data.
4.3. Regular Expressions
Two validation keywords, "pattern" and "patternProperties", use
regular expressions to express constraints, and the "regex" value for
the "format" keyword constrains the instance value to be a regular
Wright, et al. Expires September 20, 2018 [Page 7]
Internet-Draft JSON Schema Validation March 2018
expression. These regular expressions SHOULD be valid according to
the ECMA 262 [ecma262] regular expression dialect.
Furthermore, given the high disparity in regular expression
constructs support, schema authors SHOULD limit themselves to the
following regular expression tokens:
individual Unicode characters, as defined by the JSON
specification [RFC7159];
simple character classes ([abc]), range character classes ([a-z]);
complemented character classes ([^abc], [^a-z]);
simple quantifiers: "+" (one or more), "*" (zero or more), "?"
(zero or one), and their lazy versions ("+?", "*?", "??");
range quantifiers: "{x}" (exactly x occurrences), "{x,y}" (at
least x, at most y, occurrences), {x,} (x occurrences or more),
and their lazy versions;
the beginning-of-input ("^") and end-of-input ("$") anchors;
simple grouping ("(...)") and alternation ("|").
Finally, implementations MUST NOT take regular expressions to be
anchored, neither at the beginning nor at the end. This means, for
instance, the pattern "es" matches "expression".
5. Meta-Schema
The current URI for the JSON Schema Validation is <http://json-
schema.org/draft-07/schema#>.
6. Validation Keywords
Validation keywords in a schema impose requirements for successful
validation of an instance.
6.1. Validation Keywords for Any Instance Type
6.1.1. type
The value of this keyword MUST be either a string or an array. If it
is an array, elements of the array MUST be strings and MUST be
unique.
Wright, et al. Expires September 20, 2018 [Page 8]
Internet-Draft JSON Schema Validation March 2018
String values MUST be one of the six primitive types ("null",
"boolean", "object", "array", "number", or "string"), or "integer"
which matches any number with a zero fractional part.
An instance validates if and only if the instance is in any of the
sets listed for this keyword.
6.1.2. enum
The value of this keyword MUST be an array. This array SHOULD have
at least one element. Elements in the array SHOULD be unique.
An instance validates successfully against this keyword if its value
is equal to one of the elements in this keyword's array value.
Elements in the array might be of any value, including null.
6.1.3. const
The value of this keyword MAY be of any type, including null.
An instance validates successfully against this keyword if its value
is equal to the value of the keyword.
6.2. Validation Keywords for Numeric Instances (number and integer)
6.2.1. multipleOf
The value of "multipleOf" MUST be a number, strictly greater than 0.
A numeric instance is valid only if division by this keyword's value
results in an integer.
6.2.2. maximum
The value of "maximum" MUST be a number, representing an inclusive
upper limit for a numeric instance.
If the instance is a number, then this keyword validates only if the
instance is less than or exactly equal to "maximum".
6.2.3. exclusiveMaximum
The value of "exclusiveMaximum" MUST be number, representing an
exclusive upper limit for a numeric instance.
If the instance is a number, then the instance is valid only if it
has a value strictly less than (not equal to) "exclusiveMaximum".
Wright, et al. Expires September 20, 2018 [Page 9]
Internet-Draft JSON Schema Validation March 2018
6.2.4. minimum
The value of "minimum" MUST be a number, representing an inclusive
lower limit for a numeric instance.
If the instance is a number, then this keyword validates only if the
instance is greater than or exactly equal to "minimum".
6.2.5. exclusiveMinimum
The value of "exclusiveMinimum" MUST be number, representing an
exclusive lower limit for a numeric instance.
If the instance is a number, then the instance is valid only if it
has a value strictly greater than (not equal to) "exclusiveMinimum".
6.3. Validation Keywords for Strings
6.3.1. maxLength
The value of this keyword MUST be a non-negative integer.
A string instance is valid against this keyword if its length is less
than, or equal to, the value of this keyword.
The length of a string instance is defined as the number of its
characters as defined by RFC 7159 [RFC7159].
6.3.2. minLength
The value of this keyword MUST be a non-negative integer.
A string instance is valid against this keyword if its length is
greater than, or equal to, the value of this keyword.
The length of a string instance is defined as the number of its
characters as defined by RFC 7159 [RFC7159].
Omitting this keyword has the same behavior as a value of 0.
6.3.3. pattern
The value of this keyword MUST be a string. This string SHOULD be a
valid regular expression, according to the ECMA 262 regular
expression dialect.
Wright, et al. Expires September 20, 2018 [Page 10]
Internet-Draft JSON Schema Validation March 2018
A string instance is considered valid if the regular expression
matches the instance successfully. Recall: regular expressions are
not implicitly anchored.
6.4. Validation Keywords for Arrays
6.4.1. items
The value of "items" MUST be either a valid JSON Schema or an array
of valid JSON Schemas.
This keyword determines how child instances validate for arrays, and
does not directly validate the immediate instance itself.
If "items" is a schema, validation succeeds if all elements in the
array successfully validate against that schema.
If "items" is an array of schemas, validation succeeds if each
element of the instance validates against the schema at the same
position, if any.
Omitting this keyword has the same behavior as an empty schema.
6.4.2. additionalItems
The value of "additionalItems" MUST be a valid JSON Schema.
This keyword determines how child instances validate for arrays, and
does not directly validate the immediate instance itself.
If "items" is an array of schemas, validation succeeds if every
instance element at a position greater than the size of "items"
validates against "additionalItems".
Otherwise, "additionalItems" MUST be ignored, as the "items" schema
(possibly the default value of an empty schema) is applied to all
elements.
Omitting this keyword has the same behavior as an empty schema.
6.4.3. maxItems
The value of this keyword MUST be a non-negative integer.
An array instance is valid against "maxItems" if its size is less
than, or equal to, the value of this keyword.
Wright, et al. Expires September 20, 2018 [Page 11]
Internet-Draft JSON Schema Validation March 2018
6.4.4. minItems
The value of this keyword MUST be a non-negative integer.
An array instance is valid against "minItems" if its size is greater
than, or equal to, the value of this keyword.
Omitting this keyword has the same behavior as a value of 0.
6.4.5. uniqueItems
The value of this keyword MUST be a boolean.
If this keyword has boolean value false, the instance validates
successfully. If it has boolean value true, the instance validates
successfully if all of its elements are unique.
Omitting this keyword has the same behavior as a value of false.
6.4.6. contains
The value of this keyword MUST be a valid JSON Schema.
An array instance is valid against "contains" if at least one of its
elements is valid against the given schema.
6.5. Validation Keywords for Objects
6.5.1. maxProperties
The value of this keyword MUST be a non-negative integer.
An object instance is valid against "maxProperties" if its number of
properties is less than, or equal to, the value of this keyword.
6.5.2. minProperties
The value of this keyword MUST be a non-negative integer.
An object instance is valid against "minProperties" if its number of
properties is greater than, or equal to, the value of this keyword.
Omitting this keyword has the same behavior as a value of 0.
Wright, et al. Expires September 20, 2018 [Page 12]
Internet-Draft JSON Schema Validation March 2018
6.5.3. required
The value of this keyword MUST be an array. Elements of this array,
if any, MUST be strings, and MUST be unique.
An object instance is valid against this keyword if every item in the
array is the name of a property in the instance.
Omitting this keyword has the same behavior as an empty array.
6.5.4. properties
The value of "properties" MUST be an object. Each value of this
object MUST be a valid JSON Schema.
This keyword determines how child instances validate for objects, and
does not directly validate the immediate instance itself.
Validation succeeds if, for each name that appears in both the
instance and as a name within this keyword's value, the child
instance for that name successfully validates against the
corresponding schema.
Omitting this keyword has the same behavior as an empty object.
6.5.5. patternProperties
The value of "patternProperties" MUST be an object. Each property
name of this object SHOULD be a valid regular expression, according
to the ECMA 262 regular expression dialect. Each property value of
this object MUST be a valid JSON Schema.
This keyword determines how child instances validate for objects, and
does not directly validate the immediate instance itself. Validation
of the primitive instance type against this keyword always succeeds.
Validation succeeds if, for each instance name that matches any
regular expressions that appear as a property name in this keyword's
value, the child instance for that name successfully validates
against each schema that corresponds to a matching regular
expression.
Omitting this keyword has the same behavior as an empty object.
Wright, et al. Expires September 20, 2018 [Page 13]
Internet-Draft JSON Schema Validation March 2018
6.5.6. additionalProperties
The value of "additionalProperties" MUST be a valid JSON Schema.
This keyword determines how child instances validate for objects, and
does not directly validate the immediate instance itself.
Validation with "additionalProperties" applies only to the child
values of instance names that do not match any names in "properties",
and do not match any regular expression in "patternProperties".
For all such properties, validation succeeds if the child instance
validates against the "additionalProperties" schema.
Omitting this keyword has the same behavior as an empty schema.
6.5.7. dependencies
[[CREF1: This keyword may be split into two, with the variation that
uses an array of property names rather than a subschema getting a new
name. The dual behavior is confusing and relatively difficult to
implement. In the previous draft, we proposed dropping the keyword
altogether, or dropping one of its forms, but we received feedback in
support of keeping it. See issues #442 and #528 at
<https://github.com/json-schema-org/json-schema-spec/issues> for
further discussion. Further feedback is encouraged. ]]
This keyword specifies rules that are evaluated if the instance is an
object and contains a certain property.
This keyword's value MUST be an object. Each property specifies a
dependency. Each dependency value MUST be an array or a valid JSON
Schema.
If the dependency value is a subschema, and the dependency key is a
property in the instance, the entire instance must validate against
the dependency value.
If the dependency value is an array, each element in the array, if
any, MUST be a string, and MUST be unique. If the dependency key is
a property in the instance, each of the items in the dependency value
must be a property that exists in the instance.
Omitting this keyword has the same behavior as an empty object.
Wright, et al. Expires September 20, 2018 [Page 14]
Internet-Draft JSON Schema Validation March 2018
6.5.8. propertyNames
The value of "propertyNames" MUST be a valid JSON Schema.
If the instance is an object, this keyword validates if every
property name in the instance validates against the provided schema.
Note the property name that the schema is testing will always be a
string.
Omitting this keyword has the same behavior as an empty schema.
6.6. Keywords for Applying Subschemas Conditionally
These keywords work together to implement conditional application of
a subschema based on the outcome of another subschema.
These keywords MUST NOT interact with each other across subschema
boundaries. In other words, an "if" in one branch of an "allOf" MUST
NOT have an impact on a "then" or "else" in another branch.
There is no default behavior for any of these keywords when they are
not present. In particular, they MUST NOT be treated as if present
with an empty schema, and when "if" is not present, both "then" and
"else" MUST be entirely ignored.
6.6.1. if
This keyword's value MUST be a valid JSON Schema.
This validation outcome of this keyword's subschema has no direct
effect on the overall validation result. Rather, it controls which
of the "then" or "else" keywords are evaluated.
Instances that successfully validate against this keyword's subschema
MUST also be valid against the subschema value of the "then" keyword,
if present.
Instances that fail to validate against this keyword's subschema MUST
also be valid against the subschema value of the "else" keyword, if
present.
If annotations (Section 3.3) are being collected, they are collected
from this keyword's subschema in the usual way, including when the
keyword is present without either "then" or "else".
Wright, et al. Expires September 20, 2018 [Page 15]
Internet-Draft JSON Schema Validation March 2018
6.6.2. then
This keyword's value MUST be a valid JSON Schema.
When "if" is present, and the instance successfully validates against
its subschema, then valiation succeeds against this keyword if the
instance also successfully validates against this keyword's
subschema.
This keyword has no effect when "if" is absent, or when the instance
fails to validate against its subschema. Implementations MUST NOT
evaluate the instance against this keyword, for either validation or
annotation collection purposes, in such cases.
6.6.3. else
This keyword's value MUST be a valid JSON Schema.
When "if" is present, and the instance fails to validate against its
subschema, then valiation succeeds against this keyword if the
instance successfully validates against this keyword's subschema.
This keyword has no effect when "if" is absent, or when the instance
successfully validates against its subschema. Implementations MUST
NOT evaluate the instance against this keyword, for either validation
or annotation collection purposes, in such cases.
6.7. Keywords for Applying Subschemas With Boolean Logic
6.7.1. allOf
This keyword's value MUST be a non-empty array. Each item of the
array MUST be a valid JSON Schema.
An instance validates successfully against this keyword if it
validates successfully against all schemas defined by this keyword's
value.
6.7.2. anyOf
This keyword's value MUST be a non-empty array. Each item of the
array MUST be a valid JSON Schema.
An instance validates successfully against this keyword if it
validates successfully against at least one schema defined by this
keyword's value.
Wright, et al. Expires September 20, 2018 [Page 16]
Internet-Draft JSON Schema Validation March 2018
6.7.3. oneOf
This keyword's value MUST be a non-empty array. Each item of the
array MUST be a valid JSON Schema.
An instance validates successfully against this keyword if it
validates successfully against exactly one schema defined by this
keyword's value.
6.7.4. not
This keyword's value MUST be a valid JSON Schema.
An instance is valid against this keyword if it fails to validate
successfully against the schema defined by this keyword.
7. Semantic Validation With "format"
7.1. Foreword
Structural validation alone may be insufficient to validate that an
instance meets all the requirements of an application. The "format"
keyword is defined to allow interoperable semantic validation for a
fixed subset of values which are accurately described by
authoritative resources, be they RFCs or other external
specifications.
The value of this keyword is called a format attribute. It MUST be a
string. A format attribute can generally only validate a given set
of instance types. If the type of the instance to validate is not in
this set, validation for this format attribute and instance SHOULD
succeed.
7.2. Implementation Requirements
The "format" keyword functions as both an annotation (Section 3.3)
and as an assertion (Section 3.2). While no special effort is
required to implement it as an annotation conveying semantic meaning,
implementing validation is non-trivial.
Implementations MAY support the "format" keyword as a validation
assertion. Should they choose to do so:
they SHOULD implement validation for attributes defined below;
they SHOULD offer an option to disable validation for this
keyword.
Wright, et al. Expires September 20, 2018 [Page 17]
Internet-Draft JSON Schema Validation March 2018
Implementations MAY add custom format attributes. Save for agreement
between parties, schema authors SHALL NOT expect a peer
implementation to support this keyword and/or custom format
attributes.
7.3. Defined Formats
7.3.1. Dates and Times
These attributes apply to string instances.
Date and time format names are derived from RFC 3339, section 5.6
[RFC3339].
Implementations supporting formats SHOULD implement support for the
following attributes:
date-time: A string instance is valid against this attribute if it
is a valid representation according to the "date-time" production.
date: A string instance is valid against this attribute if it is a
valid representation according to the "full-date" production.
time: A string instance is valid against this attribute if it is a
valid representation according to the "full-time" production.
Implementations MAY support additional attributes using the other
production names defined in that section. If "full-date" or "full-
time" are implemented, the corresponding short form ("date" or "time"
respectively) MUST be implemented, and MUST behave identically.
Implementations SHOULD NOT define extension attributes with any name
matching an RFC 3339 production unless it validates according to the
rules of that production. [[CREF2: There is not currently consensus
on the need for supporting all RFC 3339 formats, so this approach of
reserving the namespace will encourage experimentation without
committing to the entire set. Either the format implementation
requirements will become more flexible in general, or these will
likely either be promoted to fully specified attributes or dropped.
]]
7.3.2. Email Addresses
These attributes apply to string instances.
A string instance is valid against these attributes if it is a valid
Internet email address as follows:
email: As defined by RFC 5322, section 3.4.1 [RFC5322].
Wright, et al. Expires September 20, 2018 [Page 18]
Internet-Draft JSON Schema Validation March 2018
idn-email: As defined by RFC 6531 [RFC6531]
Note that all strings valid against the "email" attribute are also
valid against the "idn-email" attribute.
7.3.3. Hostnames
These attributes apply to string instances.
A string instance is valid against these attributes if it is a valid
representation for an Internet hostname as follows:
hostname: As defined by RFC 1034, section 3.1 [RFC1034], including
host names produced using the Punycode algorithm specified in RFC
5891, section 4.4 [RFC5891].
idn-hostname: As defined by either RFC 1034 as for hostname, or an
internationalized hostname as defined by RFC 5890, section 2.3.2.3
[RFC5890].
Note that all strings valid against the "hostname" attribute are also
valid against the "idn-hostname" attribute.
7.3.4. IP Addresses
These attributes apply to string instances.
A string instance is valid against these attributes if it is a valid
representation of an IP address as follows:
ipv4: An IPv4 address according to the "dotted-quad" ABNF syntax as
defined in RFC 2673, section 3.2 [RFC2673].
ipv6: An IPv6 address as defined in RFC 4291, section 2.2 [RFC4291].
7.3.5. Resource Identifiers
These attributes apply to string instances.
uri: A string instance is valid against this attribute if it is a
valid URI, according to [RFC3986].
uri-reference: A string instance is valid against this attribute if
it is a valid URI Reference (either a URI or a relative-
reference), according to [RFC3986].
iri: A string instance is valid against this attribute if it is a
valid IRI, according to [RFC3987].
Wright, et al. Expires September 20, 2018 [Page 19]
Internet-Draft JSON Schema Validation March 2018
iri-reference: A string instance is valid against this attribute if
it is a valid IRI Reference (either an IRI or a relative-
reference), according to [RFC3987].
Note that all valid URIs are valid IRIs, and all valid URI References
are also valid IRI References.
7.3.6. uri-template
This attribute applies to string instances.
A string instance is valid against this attribute if it is a valid
URI Template (of any level), according to [RFC6570].
Note that URI Templates may be used for IRIs; there is no separate
IRI Template specification.
7.3.7. JSON Pointers
These attributes apply to string instances.
json-pointer: A string instance is valid against this attribute if
it is a valid JSON string representation of a JSON Pointer,
according to RFC 6901, section 5 [RFC6901].
relative-json-pointer: A string instance is valid against this
attribute if it is a valid Relative JSON Pointer
[relative-json-pointer].
To allow for both absolute and relative JSON Pointers, use "anyOf" or
"oneOf" to indicate support for either format.
7.3.8. regex
This attribute applies to string instances.
A regular expression, which SHOULD be valid according to the ECMA 262
[ecma262] regular expression dialect.
Implementations that validate formats MUST accept at least the subset
of ECMA 262 defined in the Regular Expressions (Section 4.3) section
of this specification, and SHOULD accept all valid ECMA 262
expressions.
Wright, et al. Expires September 20, 2018 [Page 20]
Internet-Draft JSON Schema Validation March 2018
8. String-Encoding Non-JSON Data
8.1. Foreword
Properties defined in this section indicate that an instance contains
non-JSON data encoded in a JSON string. They describe the type of
content and how it is encoded.
These properties provide additional information required to interpret
JSON data as rich multimedia documents.
8.2. Implementation Requirements
The content keywords function as both annotations (Section 3.3) and
as assertions (Section 3.2). While no special effort is required to
implement them as annotations conveying how applications can
interpret the data in the string, implementing validation of
conformance to the media type and encoding is non-trivial.
Implementations MAY support the "contentMediaType" and
"contentEncoding" keywords as validation assertions. Should they
choose to do so, they SHOULD offer an option to disable validation
for these keywords.
8.3. contentEncoding
If the instance value is a string, this property defines that the
string SHOULD be interpreted as binary data and decoded using the
encoding named by this property. RFC 2045, Sec 6.1 [RFC2045] lists
the possible values for this property.
The value of this property MUST be a string.
The value of this property SHOULD be ignored if the instance
described is not a string.
8.4. contentMediaType
The value of this property must be a media type, as defined by RFC
2046 [RFC2046]. This property defines the media type of instances
which this schema defines.
The value of this property MUST be a string.
The value of this property SHOULD be ignored if the instance
described is not a string.
Wright, et al. Expires September 20, 2018 [Page 21]
Internet-Draft JSON Schema Validation March 2018
If the "contentEncoding" property is not present, but the instance
value is a string, then the value of this property SHOULD specify a
text document type, and the character set SHOULD be the character set
into which the JSON string value was decoded (for which the default
is Unicode).
8.5. Example
Here is an example schema, illustrating the use of "contentEncoding"
and "contentMediaType":
{
"type": "string",
"contentEncoding": "base64",
"contentMediaType": "image/png"
}
Instances described by this schema should be strings, and their
values should be interpretable as base64-encoded PNG images.
Another example:
{
"type": "string",
"contentMediaType": "text/html"
}
Instances described by this schema should be strings containing HTML,
using whatever character set the JSON string was decoded into
(default is Unicode).
9. Schema Re-Use With "definitions"
The "definitions" keywords provides a standardized location for
schema authors to inline re-usable JSON Schemas into a more general
schema. The keyword does not directly affect the validation result.
This keyword's value MUST be an object. Each member value of this
object MUST be a valid JSON Schema.
As an example, here is a schema describing an array of positive
integers, where the positive integer constraint is a subschema in
"definitions":
Wright, et al. Expires September 20, 2018 [Page 22]
Internet-Draft JSON Schema Validation March 2018
{
"type": "array",
"items": { "$ref": "#/definitions/positiveInteger" },
"definitions": {
"positiveInteger": {
"type": "integer",
"exclusiveMinimum": 0
}
}
}
10. Schema Annotations
Schema validation is a useful mechanism for annotating instance data
with additional information. The rules for determining when and how
annotations are associated with an instance are outlined in section
3.3.
These general-purpose annotation keywords provide commonly used
information for documentation and user interface display purposes.
They are not intended to form a comprehensive set of features.
Rather, additional vocabularies can be defined for more complex
annotation-based applications.
10.1. "title" and "description"
The value of both of these keywords MUST be a string.
Both of these keywords can be used to decorate a user interface with
information about the data produced by this user interface. A title
will preferably be short, whereas a description will provide
explanation about the purpose of the instance described by this
schema.
10.2. "default"
There are no restrictions placed on the value of this keyword. When
multiple occurrences of this keyword are applicable to a single sub-
instance, implementations SHOULD remove duplicates.
This keyword can be used to supply a default JSON value associated
with a particular schema. It is RECOMMENDED that a default value be
valid against the associated schema.
Wright, et al. Expires September 20, 2018 [Page 23]
Internet-Draft JSON Schema Validation March 2018
10.3. "readOnly" and "writeOnly"
The value of these keywords MUST be a boolean. When multiple
occurrences of these keywords are applicable to a single sub-
instance, the resulting value MUST be true if any occurrence
specifies a true value, and MUST be false otherwise.
If "readOnly" has a value of boolean true, it indicates that the
value of the instance is managed exclusively by the owning authority,
and attempts by an application to modify the value of this property
are expected to be ignored or rejected by that owning authority.
An instance document that is marked as "readOnly for the entire
document MAY be ignored if sent to the owning authority, or MAY
result in an error, at the authority's discretion.
If "writeOnly" has a value of boolean true, it indicates that the
value is never present when the instance is retrieved from the owning
authority. It can be present when sent to the owning authority to
update or create the document (or the resource it represents), but it
will not be included in any updated or newly created version of the
instance.
An instance document that is marked as "writeOnly" for the entire
document MAY be returned as a blank document of some sort, or MAY
produce an error upon retrieval, or have the retrieval request
ignored, at the authority's discretion.
For example, "readOnly" would be used to mark a database-generated
serial number as read-only, while "writeOnly" would be used to mark a
password input field.
These keywords can be used to assist in user interface instance
generation. In particular, an application MAY choose to use a widget
that hides input values as they are typed for write-only fields.
Omitting these keywords has the same behavior as values of false.
10.4. "examples"
The value of this keyword MUST be an array. There are no
restrictions placed on the values within the array. When multiple
occurrences of this keyword are applicable to a single sub-instance,
implementations MUST provide a flat array of all values rather than
an array of arrays.
This keyword can be used to provide sample JSON values associated
with a particular schema, for the purpose of illustrating usage. It
Wright, et al. Expires September 20, 2018 [Page 24]
Internet-Draft JSON Schema Validation March 2018
is RECOMMENDED that these values be valid against the associated
schema.
Implementations MAY use the value(s) of "default", if present, as an
additional example. If "examples" is absent, "default" MAY still be
used in this manner.
11. Security Considerations
JSON Schema validation defines a vocabulary for JSON Schema core and
concerns all the security considerations listed there.
JSON Schema validation allows the use of Regular Expressions, which
have numerous different (often incompatible) implementations. Some
implementations allow the embedding of arbitrary code, which is
outside the scope of JSON Schema and MUST NOT be permitted. Regular
expressions can often also be crafted to be extremely expensive to
compute (with so-called "catastrophic backtracking"), resulting in a
denial-of-service attack.
Implementations that support validating or otherwise evaluating
instance string data based on "contentEncoding" and/or
"contentMediaType" are at risk of evaluating data in an unsafe way
based on misleading information. Applications can mitigate this risk
by only performing such processing when a relationship between the
schema and instance is established (e.g., they share the same
authority).
Processing a media type or encoding is subject to the security
considerations of that media type or encoding. For example, the
security considerations of RFC 4329 Scripting Media Types [RFC4329]
apply when processing JavaScript or ECMAScript encoded within a JSON
string.
12. References
12.1. Normative References
[ecma262] "ECMA 262 specification", <http://www.ecma-
international.org/publications/files/ECMA-ST/
Ecma-262.pdf>.
[json-schema]
Wright, A. and H. Andrews, "JSON Schema: A Media Type for
Describing JSON Documents", draft-handrews-json-schema-01
(work in progress), November 2017.
Wright, et al. Expires September 20, 2018 [Page 25]
Internet-Draft JSON Schema Validation March 2018
[relative-json-pointer]
Luff, G. and H. Andrews, "Relative JSON Pointers", draft-
handrews-relative-json-pointer-01 (work in progress),
November 2017.
[RFC1034] Mockapetris, P., "Domain names - concepts and facilities",
STD 13, RFC 1034, DOI 10.17487/RFC1034, November 1987,
<https://www.rfc-editor.org/info/rfc1034>.
[RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part One: Format of Internet Message
Bodies", RFC 2045, DOI 10.17487/RFC2045, November 1996,
<https://www.rfc-editor.org/info/rfc2045>.
[RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part Two: Media Types", RFC 2046,
DOI 10.17487/RFC2046, November 1996,
<https://www.rfc-editor.org/info/rfc2046>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC2673] Crawford, M., "Binary Labels in the Domain Name System",
RFC 2673, DOI 10.17487/RFC2673, August 1999,
<https://www.rfc-editor.org/info/rfc2673>.
[RFC3339] Klyne, G. and C. Newman, "Date and Time on the Internet:
Timestamps", RFC 3339, DOI 10.17487/RFC3339, July 2002,
<https://www.rfc-editor.org/info/rfc3339>.
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifier (URI): Generic Syntax", STD 66,
RFC 3986, DOI 10.17487/RFC3986, January 2005,
<https://www.rfc-editor.org/info/rfc3986>.
[RFC3987] Duerst, M. and M. Suignard, "Internationalized Resource
Identifiers (IRIs)", RFC 3987, DOI 10.17487/RFC3987,
January 2005, <https://www.rfc-editor.org/info/rfc3987>.
[RFC4291] Hinden, R. and S. Deering, "IP Version 6 Addressing
Architecture", RFC 4291, DOI 10.17487/RFC4291, February
2006, <https://www.rfc-editor.org/info/rfc4291>.
[RFC5322] Resnick, P., Ed., "Internet Message Format", RFC 5322,
DOI 10.17487/RFC5322, October 2008,
<https://www.rfc-editor.org/info/rfc5322>.
Wright, et al. Expires September 20, 2018 [Page 26]
Internet-Draft JSON Schema Validation March 2018
[RFC5890] Klensin, J., "Internationalized Domain Names for
Applications (IDNA): Definitions and Document Framework",
RFC 5890, DOI 10.17487/RFC5890, August 2010,
<https://www.rfc-editor.org/info/rfc5890>.
[RFC5891] Klensin, J., "Internationalized Domain Names in
Applications (IDNA): Protocol", RFC 5891,
DOI 10.17487/RFC5891, August 2010,
<https://www.rfc-editor.org/info/rfc5891>.
[RFC6531] Yao, J. and W. Mao, "SMTP Extension for Internationalized
Email", RFC 6531, DOI 10.17487/RFC6531, February 2012,
<https://www.rfc-editor.org/info/rfc6531>.
[RFC6570] Gregorio, J., Fielding, R., Hadley, M., Nottingham, M.,
and D. Orchard, "URI Template", RFC 6570,
DOI 10.17487/RFC6570, March 2012,
<https://www.rfc-editor.org/info/rfc6570>.
[RFC6901] Bryan, P., Ed., Zyp, K., and M. Nottingham, Ed.,
"JavaScript Object Notation (JSON) Pointer", RFC 6901,
DOI 10.17487/RFC6901, April 2013,
<https://www.rfc-editor.org/info/rfc6901>.
[RFC7159] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
Interchange Format", RFC 7159, DOI 10.17487/RFC7159, March
2014, <https://www.rfc-editor.org/info/rfc7159>.
12.2. Informative References
[RFC4329] Hoehrmann, B., "Scripting Media Types", RFC 4329,
DOI 10.17487/RFC4329, April 2006,
<https://www.rfc-editor.org/info/rfc4329>.
Wright, et al. Expires September 20, 2018 [Page 27]
Internet-Draft JSON Schema Validation March 2018
Appendix A. Acknowledgments
Thanks to Gary Court, Francis Galiegue, Kris Zyp, and Geraint Luff
for their work on the initial drafts of JSON Schema.
Thanks to Jason Desrosiers, Daniel Perrett, Erik Wilde, Ben Hutton,
Evgeny Poberezkin, Brad Bowman, Gowry Sankar, Donald Pipowitch, Dave
Finlay, and Denis Laxalde for their submissions and patches to the
document.
Appendix B. ChangeLog
[[CREF3: This section to be removed before leaving Internet-Draft
status.]]
draft-handrews-json-schema-validation-01
* This draft is purely a clarification with no functional changes
* Provided the general principle behind ignoring annotations
under "not" and similar cases
* Clarified "if"/"then"/"else" validation interactions
* Clarified "if"/"then"/"else" behavior for annotation
* Minor formatting and cross-referencing improvements
draft-handrews-json-schema-validation-00
* Added "if"/"then"/"else"
* Classify keywords as assertions or annotations per the core
spec
* Warn of possibly removing "dependencies" in the future
* Grouped validation keywords into sub-sections for readability
* Moved "readOnly" from hyper-schema to validation meta-data
* Added "writeOnly"
* Added string-encoded media section, with former hyper-schema
"media" keywords
* Restored "regex" format (removal was unintentional)
Wright, et al. Expires September 20, 2018 [Page 28]
Internet-Draft JSON Schema Validation March 2018
* Added "date" and "time" formats, and reserved additional RFC
3339 format names
* I18N formats: "iri", "iri-reference", "idn-hostname", "idn-
email"
* Clarify that "json-pointer" format means string encoding, not
URI fragment
* Fixed typo that inverted the meaning of "minimum" and
"exclusiveMinimum"
* Move format syntax references into Normative References
* JSON is a normative requirement
draft-wright-json-schema-validation-01
* Standardized on hyphenated format names with full words
("uriref" becomes "uri-reference")
* Add the formats "uri-template" and "json-pointer"
* Changed "exclusiveMaximum"/"exclusiveMinimum" from boolean
modifiers of "maximum"/"minimum" to independent numeric fields.
* Split the additionalItems/items into two sections
* Reworked properties/patternProperties/additionalProperties
definition
* Added "examples" keyword
* Added "contains" keyword
* Allow empty "required" and "dependencies" arrays
* Fixed "type" reference to primitive types
* Added "const" keyword
* Added "propertyNames" keyword
draft-wright-json-schema-validation-00
* Added additional security considerations
Wright, et al. Expires September 20, 2018 [Page 29]
Internet-Draft JSON Schema Validation March 2018
* Removed reference to "latest version" meta-schema, use numbered
version instead
* Rephrased many keyword definitions for brevity
* Added "uriref" format that also allows relative URI references
draft-fge-json-schema-validation-00
* Initial draft.
* Salvaged from draft v3.
* Redefine the "required" keyword.
* Remove "extends", "disallow"
* Add "anyOf", "allOf", "oneOf", "not", "definitions",
"minProperties", "maxProperties".
* "dependencies" member values can no longer be single strings;
at least one element is required in a property dependency
array.
* Rename "divisibleBy" to "multipleOf".
* "type" arrays can no longer have schemas; remove "any" as a
possible value.
* Rework the "format" section; make support optional.
* "format": remove attributes "phone", "style", "color"; rename
"ip-address" to "ipv4"; add references for all attributes.
* Provide algorithms to calculate schema(s) for array/object
instances.
* Add interoperability considerations.
Authors' Addresses
Austin Wright (editor)
EMail: aaa@bzfx.net
Wright, et al. Expires September 20, 2018 [Page 30]
Internet-Draft JSON Schema Validation March 2018
Henry Andrews (editor)
Cloudflare, Inc.
San Francisco, CA
USA
EMail: henry@cloudflare.com
Geraint Luff
Cambridge
UK
EMail: luffgd@gmail.com
Wright, et al. Expires September 20, 2018 [Page 31]