HTTP M. Nottingham
Internet-Draft Fastly
Intended status: Standards Track P-H. Kamp
Expires: August 5, 2018 The Varnish Cache Project
February 1, 2018
Structured Headers for HTTP
draft-ietf-httpbis-header-structure-03
Abstract
This document describes a set of data types and parsing algorithms
associated with them that are intended to make it easier and safer to
define and handle HTTP header fields. It is intended for use by new
specifications of HTTP header fields as well as revisions of existing
header field specifications when doing so does not cause
interoperability issues.
Note to Readers
_RFC EDITOR: please remove this section before publication_
Discussion of this draft takes place on the HTTP working group
mailing list (ietf-http-wg@w3.org), which is archived at
https://lists.w3.org/Archives/Public/ietf-http-wg/ [1].
Working Group information can be found at https://httpwg.github.io/
[2]; source code and issues list for this draft can be found at
https://github.com/httpwg/http-extensions/labels/header-structure
[3].
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on August 5, 2018.
Nottingham & Kamp Expires August 5, 2018 [Page 1]
Internet-Draft Structured Headers for HTTP February 2018
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Notational Conventions . . . . . . . . . . . . . . . . . 3
2. Specifying Structured Headers . . . . . . . . . . . . . . . . 4
3. Parsing Text into Structured Headers . . . . . . . . . . . . 5
4. Structured Header Data Types . . . . . . . . . . . . . . . . 6
4.1. Dictionaries . . . . . . . . . . . . . . . . . . . . . . 6
4.2. Lists . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.3. Parameterised Labels . . . . . . . . . . . . . . . . . . 9
4.4. Items . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.5. Integers . . . . . . . . . . . . . . . . . . . . . . . . 11
4.6. Floats . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.7. Strings . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.8. Labels . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.9. Binary Content . . . . . . . . . . . . . . . . . . . . . 15
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 16
6. Security Considerations . . . . . . . . . . . . . . . . . . . 16
7. References . . . . . . . . . . . . . . . . . . . . . . . . . 16
7.1. Normative References . . . . . . . . . . . . . . . . . . 16
7.2. Informative References . . . . . . . . . . . . . . . . . 17
7.3. URIs . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Appendix A. Changes . . . . . . . . . . . . . . . . . . . . . . 17
A.1. Since draft-ietf-httpbis-header-structure-02 . . . . . . 17
A.2. Since draft-ietf-httpbis-header-structure-01 . . . . . . 18
A.3. Since draft-ietf-httpbis-header-structure-00 . . . . . . 18
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 18
1. Introduction
Specifying the syntax of new HTTP header fields is an onerous task;
even with the guidance in [RFC7231], Section 8.3.1, there are many
Nottingham & Kamp Expires August 5, 2018 [Page 2]
Internet-Draft Structured Headers for HTTP February 2018
decisions - and pitfalls - for a prospective HTTP header field
author.
Once a header field is defined, bespoke parsers for it often need to
be written, because each header has slightly different handling of
what looks like common syntax.
This document introduces structured HTTP header field values
(hereafter, Structured Headers) to address these problems.
Structured Headers define a generic, abstract model for header field
values, along with a concrete serialisation for expressing that model
in textual HTTP headers, as used by HTTP/1 [RFC7230] and HTTP/2
[RFC7540].
HTTP headers that are defined as Structured Headers use the types
defined in this specification to define their syntax and basic
handling rules, thereby simplifying both their definition and
parsing.
Additionally, future versions of HTTP can define alternative
serialisations of the abstract model of Structured Headers, allowing
headers that use it to be transmitted more efficiently without being
redefined.
Note that it is not a goal of this document to redefine the syntax of
existing HTTP headers; the mechanisms described herein are only
intended to be used with headers that explicitly opt into them.
To specify a header field that uses Structured Headers, see
Section 2.
Section 4 defines a number of abstract data types that can be used in
Structured Headers. Dictionaries and lists are only usable at the
"top" level, while the remaining types can be specified appear at the
top level or inside those structures.
Those abstract types can be serialised into textual headers - such as
those used in HTTP/1 and HTTP/2 - using the algorithms described in
Section 3.
1.1. Notational Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
Nottingham & Kamp Expires August 5, 2018 [Page 3]
Internet-Draft Structured Headers for HTTP February 2018
This document uses the Augmented Backus-Naur Form (ABNF) notation of
[RFC5234], including the DIGIT, ALPHA and DQUOTE rules from that
document. It also includes the OWS rule from [RFC7230].
2. Specifying Structured Headers
A HTTP header that uses Structured Headers need to be defined to do
so explicitly; recipients and generators need to know that the
requirements of this document are in effect. The simplest way to do
that is by referencing this document in its definition.
The field's definition will also need to specify the field-value's
allowed syntax, in terms of the types described in Section 4, along
with their associated semantics.
A header field definition cannot relax or otherwise modify the
requirements of this specification; doing so would preclude handling
by generic software.
However, header field authors are encouraged to clearly state
additional constraints upon the syntax, as well as the consequences
when those constraints are violated. Such additional constraints
could include additional structure (e.g., a list of URLs [RFC3986]
inside a string) that cannot be expressed using the primitives
defined here.
For example:
Nottingham & Kamp Expires August 5, 2018 [Page 4]
Internet-Draft Structured Headers for HTTP February 2018
# FooExample Header
The FooExample HTTP header field conveys a list of integers about how
much Foo the sender has.
FooExample is a Structured header [RFCxxxx]. Its value MUST be a
dictionary ([RFCxxxx], Section Y.Y).
The dictionary MUST contain:
* A member whose key is "foo", and whose value is an integer
([RFCxxxx], Section Y.Y), indicating the number of foos in
the message.
* A member whose key is "barUrls", and whose value is a string
([RFCxxxx], Section Y.Y), conveying the Bar URLs for the message.
See below for processing requirements.
If the parsed header field does not contain both, it MUST be ignored.
"barUrls" contains a space-separated list of URI-references ([RFC3986],
Section 4.1):
barURLs = URI-reference *( 1*SP URI-reference )
If a member of barURLs is not a valid URI-reference, it MUST be ignored.
If a member of barURLs is a relative reference ([RFC3986], Section 4.2),
it MUST be resolved ([RFC3986], Section 5) before being used.
Note that empty header field values are not allowed by the syntax,
and therefore will be considered errors.
3. Parsing Text into Structured Headers
When a receiving implementation parses textual HTTP header fields
(e.g., in HTTP/1 or HTTP/2) that are known to be Structured Headers,
it is important that care be taken, as there are a number of edge
cases that can cause interoperability or even security problems.
This section specifies the algorithm for doing so.
Given an ASCII string input_string that represents the chosen
header's field-value, return the parsed header value.
1. Discard any leading OWS from input_string.
2. If the field-value is defined to be a dictionary, let output be
the result of Parsing a Dictionary from Textual headers
(Section 4.1.1).
Nottingham & Kamp Expires August 5, 2018 [Page 5]
Internet-Draft Structured Headers for HTTP February 2018
3. If the field-value is defined to be a list, let output be the
result of Parsing a List from Text (Section 4.2.1).
4. If the field-value is defined to be a parameterised label, let
output be the result of Parsing a Parameterised Label from
Textual headers (Section 4.3.1).
5. Otherwise, let output be the result of Parsing an Item from Text
(Section 4.4.1).
6. Discard any leading OWS from input_string.
7. If input_string is not empty, throw an error.
8. Otherwise, return output.
When generating input_string for a given header field, parsers MUST
combine all instances of it into one comma-separated field-value, as
per [RFC7230], Section 3.2.2; this assures that the header is
processed correctly.
Note that in the case of lists and dictionaries, this has the effect
of coalescing all of the values for that field. However, for
singular items and parameterised labels, it will result in an error
being thrown.
Additionally, note that the effect of the parsing algorithms as
specified is generally intolerant of syntax errors; if one is
encountered, the typical response is to throw an error, thereby
discarding the entire header field value. This includes any non-
ASCII characters in input_string.
4. Structured Header Data Types
This section defines the abstract value types that can be composed
into Structured Headers, along with the textual HTTP serialisations
of them.
4.1. Dictionaries
Dictionaries are unordered maps of key-value pairs, where the keys
are labels (Section 4.8) and the values are items (Section 4.4).
There can be between 1 and 1024 members, and keys are required to be
unique.
In the textual HTTP serialisation, keys and values are separated by
"=" (without whitespace), and key/value pairs are separated by a
Nottingham & Kamp Expires August 5, 2018 [Page 6]
Internet-Draft Structured Headers for HTTP February 2018
comma with optional whitespace. Duplicate keys MUST be considered an
error.
dictionary = label "=" item *1023( OWS "," OWS label "=" item )
For example, a header field whose value is defined as a dictionary
could look like:
ExampleDictHeader: foo=1.23, en="Applepie", da=*w4ZibGV0w6ZydGUK
Typically, a header field specification will define the semantics of
individual keys, as well as whether their presence is required or
optional. Recipients MUST ignore keys that are undefined or unknown,
unless the header field's specification specifically disallows them.
4.1.1. Parsing a Dictionary from Text
Given an ASCII string input_string, return a mapping of (label,
item). input_string is modified to remove the parsed value.
1. Let dictionary be an empty, unordered mapping.
2. While input_string is not empty:
1. Let this_key be the result of running Parse Label from Text
(Section 4.8.1) with input_string. If an error is
encountered, throw it.
2. If dictionary already contains this_key, throw an error.
3. Consume a "=" from input_string; if none is present, throw
an error.
4. Let this_value be the result of running Parse Item from Text
(Section 4.4.1) with input_string. If an error is
encountered, throw it.
5. Add key this_key with value this_value to dictionary.
6. If dictionary has more than 1024 members, throw an error.
7. Discard any leading OWS from input_string.
8. If input_string is empty, return dictionary.
9. Consume a COMMA from input_string; if no comma is present,
throw an error.
Nottingham & Kamp Expires August 5, 2018 [Page 7]
Internet-Draft Structured Headers for HTTP February 2018
10. Discard any leading OWS from input_string.
3. Return dictionary.
4.2. Lists
Lists are arrays of items (Section 4.4) or parameterised labels
(Section 4.3), with one to 1024 members.
In the textual HTTP serialisation, each member is separated by a
comma and optional whitespace.
list = list_member 0*1023( OWS "," OWS list_member )
list_member = item / parameterised
For example, a header field whose value is defined as a list of
labels could look like:
ExampleLabelListHeader: foo, bar, baz_45
and a header field whose value is defined as a list of parameterised
labels could look like:
ExampleParamListHeader: abc/def; g="hi";j, klm/nop
4.2.1. Parsing a List from Text
Given an ASCII string input_string, return a list of items.
input_string is modified to remove the parsed value.
1. Let items be an empty array.
2. While input_string is not empty:
1. Let item be the result of running Parse Item from Text
(Section 4.4.1) with input_string. If an error is
encountered, throw it.
2. Append item to items.
3. If items has more than 1024 members, throw an error.
4. Discard any leading OWS from input_string.
5. If input_string is empty, return items.
6. Consume a COMMA from input_string; if no comma is present,
throw an error.
Nottingham & Kamp Expires August 5, 2018 [Page 8]
Internet-Draft Structured Headers for HTTP February 2018
7. Discard any leading OWS from input_string.
3. Return items.
4.3. Parameterised Labels
Parameterised Labels are labels (Section 4.8) with up to 256
parameters; each parameter has a label and an optional value that is
an item (Section 4.4). Ordering between parameters is not
significant, and duplicate parameters MUST be considered an error.
The textual HTTP serialisation uses semicolons (";") to delimit the
parameters from each other, and equals ("=") to delimit the parameter
name from its value.
parameterised = label *256( OWS ";" OWS label [ "=" item ] )
For example,
ExampleParamHeader: abc_123;a=1;b=2; c
4.3.1. Parsing a Parameterised Label from Text
Given an ASCII string input_string, return a label with an mapping of
parameters. input_string is modified to remove the parsed value.
1. Let primary_label be the result of Parsing a Label from Text
(Section 4.8.1) from input_string.
2. Let parameters be an empty, unordered mapping.
3. In a loop:
1. Discard any leading OWS from input_string.
2. If the first character of input_string is not ";", exit the
loop.
3. Consume a ";" character from the beginning of input_string.
4. Discard any leading OWS from input_string.
5. let param_name be the result of Parsing a Label from Text
(Section 4.8.1) from input_string.
6. If param_name is already present in parameters, throw an
error.
Nottingham & Kamp Expires August 5, 2018 [Page 9]
Internet-Draft Structured Headers for HTTP February 2018
7. Let param_value be a null value.
8. If the first character of input_string is "=":
1. Consume the "=" character at the beginning of
input_string.
2. Let param_value be the result of Parsing an Item from
Text (Section 4.4.1) from input_string.
9. If parameters has more than 255 members, throw an error.
10. Add param_name to parameters with the value param_value.
4. Return the tuple (primary_label, parameters).
4.4. Items
An item is can be a integer (Section 4.5), float (Section 4.6),
string (Section 4.7), label (Section 4.8) or binary content
(Section 4.9).
item = integer / float / string / label / binary
4.4.1. Parsing an Item from Text
Given an ASCII string input_string, return an item. input_string is
modified to remove the parsed value.
1. Discard any leading OWS from input_string.
2. If the first character of input_string is a "-" or a DIGIT,
process input_string as a number (Section 4.5.1) and return the
result, throwing any errors encountered.
3. If the first character of input_string is a DQUOTE, process
input_string as a string (Section 4.7.1) and return the result,
throwing any errors encountered.
4. If the first character of input_string is "*", process
input_string as binary content (Section 4.9.1) and return the
result, throwing any errors encountered.
5. If the first character of input_string is an lcalpha, process
input_string as a label (Section 4.8.1) and return the result,
throwing any errors encountered.
6. Otherwise, throw an error.
Nottingham & Kamp Expires August 5, 2018 [Page 10]
Internet-Draft Structured Headers for HTTP February 2018
4.5. Integers
Abstractly, integers have a range of -9,223,372,036,854,775,808 to
9,223,372,036,854,775,807 inclusive (i.e., a 64-bit signed integer).
integer = ["-"] 1*19DIGIT
Parsers that encounter an integer outside the range defined above
MUST throw an error. Therefore, the value "9223372036854775809"
would be invalid. Likewise, values that do not conform to the ABNF
above are invalid, and MUST throw an error.
For example, a header whose value is defined as a integer could look
like:
ExampleIntegerHeader: 42
4.5.1. Parsing a Number from Text
NOTE: This algorithm parses both Integers and Floats Section 4.6, and
returns the corresponding structure.
1. If the first character of input_string is not "-" or a DIGIT,
throw an error.
2. Let input_number be the result of consuming input_string up to
(but not including) the first character that is not in DIGIT,
"-", and ".".
3. If input_number contains ".", parse it as a floating point number
and let output_number be the result.
4. Otherwise, parse input_number as an integer and let output_number
be the result.
5. Return output_number.
4.6. Floats
Abstractly, floats are integers with a fractional part. They have a
maximum of fifteen digits available to be used in both of the parts,
as reflected in the ABNF below; this allows them to be stored as IEEE
754 double precision numbers (binary64) ([IEEE754]).
The textual HTTP serialisation of floats allows a maximum of fifteen
digits between the integer and fractional part, with at least one
required on each side, along with an optional "-" indicating negative
numbers.
Nottingham & Kamp Expires August 5, 2018 [Page 11]
Internet-Draft Structured Headers for HTTP February 2018
float = ["-"] (
DIGIT "." 1*14DIGIT /
2DIGIT "." 1*13DIGIT /
3DIGIT "." 1*12DIGIT /
4DIGIT "." 1*11DIGIT /
5DIGIT "." 1*10DIGIT /
6DIGIT "." 1*9DIGIT /
7DIGIT "." 1*8DIGIT /
8DIGIT "." 1*7DIGIT /
9DIGIT "." 1*6DIGIT /
10DIGIT "." 1*5DIGIT /
11DIGIT "." 1*4DIGIT /
12DIGIT "." 1*3DIGIT /
13DIGIT "." 1*2DIGIT /
14DIGIT "." 1DIGIT )
Values that do not conform to the ABNF above are invalid, and MUST
throw an error.
For example, a header whose value is defined as a float could look
like:
ExampleFloatHeader: 4.5
See Section 4.5.1 for the parsing algorithm for floats.
4.7. Strings
Abstractly, strings are ASCII strings [RFC0020], excluding control
characters (i.e., the range 0x20 to 0x7E). Note that this excludes
tabs, newlines and carriage returns. They may be at most 1024
characters long.
The textual HTTP serialisation of strings uses a backslash ("") to
escape double quotes and backslashes in strings.
string = DQUOTE 0*1024(char) DQUOTE
char = unescaped / escape ( DQUOTE / "\" )
unescaped = %x20-21 / %x23-5B / %x5D-7E
escape = "\"
For example, a header whose value is defined as a string could look
like:
ExampleStringHeader: "hello world"
Nottingham & Kamp Expires August 5, 2018 [Page 12]
Internet-Draft Structured Headers for HTTP February 2018
Note that strings only use DQUOTE as a delimiter; single quotes do
not delimit strings. Furthermore, only DQUOTE and "" can be escaped;
other sequences MUST generate an error.
Unicode is not directly supported in Structured Headers, because it
causes a number of interoperability issues, and - with few exceptions
- header values do not require it.
When it is necessary for a field value to convey non-ASCII string
content, binary content (Section 4.9) SHOULD be specified, along with
a character encoding (most likely, UTF-8).
4.7.1. Parsing a String from Text
Given an ASCII string input_string, return an unquoted string.
input_string is modified to remove the parsed value.
1. Let output_string be an empty string.
2. If the first character of input_string is not DQUOTE, throw an
error.
3. Discard the first character of input_string.
4. While input_string is not empty:
1. Let char be the result of removing the first character of
input_string.
2. If char is a backslash ("\"):
1. If input_string is now empty, throw an error.
2. Else:
1. Let next_char be the result of removing the first
character of input_string.
2. If next_char is not DQUOTE or "\", throw an error.
3. Append next_char to output_string.
3. Else, if char is DQUOTE, return output_string.
4. Else, append char to output_string.
5. If output_string contains more than 1024 characters, throw an
error.
Nottingham & Kamp Expires August 5, 2018 [Page 13]
Internet-Draft Structured Headers for HTTP February 2018
5. Otherwise, throw an error.
4.8. Labels
Labels are short (up to 256 characters) textual identifiers; their
abstract model is identical to their expression in the textual HTTP
serialisation.
label = lcalpha *255( lcalpha / DIGIT / "_" / "-"/ "*" / "/" )
lcalpha = %x61-7A ; a-z
Note that labels can only contain lowercase letters.
For example, a header whose value is defined as a label could look
like:
ExampleLabelHeader: foo/bar
4.8.1. Parsing a Label from Text
Given an ASCII string input_string, return a label. input_string is
modified to remove the parsed value.
1. If the first character of input_string is not lcalpha, throw an
error.
2. Let output_string be an empty string.
3. While input_string is not empty:
1. Let char be the result of removing the first character of
input_string.
2. If char is not one of lcalpha, DIGIT, "_", "-", "*" or "/":
1. Prepend char to input_string.
2. Return output_string.
3. Append char to output_string.
4. If output_string contains more than 256 characters, throw an
error.
4. Return output_string.
Nottingham & Kamp Expires August 5, 2018 [Page 14]
Internet-Draft Structured Headers for HTTP February 2018
4.9. Binary Content
Arbitrary binary content up to 16K in size can be conveyed in
Structured Headers.
The textual HTTP serialisation indicates their presence by a leading
"*", with the data encoded using Base 64 Encoding [RFC4648],
Section 4.
Parsers MUST consider encoded data that is padded an error, as "="
might be confused with the use of dictionaries). See [RFC4648],
Section 3.2.
Likewise, parsers MUST consider encoded data that has non-zero pad
bits an error. See [RFC4648], Section 3.5.
This specification does not relax the requirements in [RFC4648],
Section 3.1 and 3.3; therefore, parsers MUST consider characters
outside the base64 alphabet and line feeds in encoded data as errors.
binary = "*" 0*21846(base64) "*"
base64 = ALPHA / DIGIT / "+" / "/"
For example, a header whose value is defined as binary content could
look like:
ExampleBinaryHeader: *cHJldGVuZCB0aGlzIGlzIGJpbmFyeSBjb250ZW50Lg*
4.9.1. Parsing Binary Content from Text
Given an ASCII string input_string, return binary content.
input_string is modified to remove the parsed value.
1. If the first character of input_string is not "*", throw an
error.
2. Discard the first character of input_string.
3. Let b64_content be the result of removing content of input_string
up to but not including the first instance of the character "_".
If there is not a "_" character before the end of input_string,
throw an error.
4. Consume the "*" character at the beginning of input_string.
5. If b64_content is has more than 21846 characters, throw an error.
Nottingham & Kamp Expires August 5, 2018 [Page 15]
Internet-Draft Structured Headers for HTTP February 2018
6. Let binary_content be the result of Base 64 Decoding [RFC4648]
b64_content, synthesising padding if necessary. If an error is
encountered, throw it (note the requirements about recipient
behaviour in Section 4.9).
7. Return binary_content.
5. IANA Considerations
This draft has no actions for IANA.
6. Security Considerations
TBD
7. References
7.1. Normative References
[RFC0020] Cerf, V., "ASCII format for network interchange", STD 80,
RFC 20, DOI 10.17487/RFC0020, October 1969,
<https://www.rfc-editor.org/info/rfc20>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data
Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006,
<https://www.rfc-editor.org/info/rfc4648>.
[RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234,
DOI 10.17487/RFC5234, January 2008,
<https://www.rfc-editor.org/info/rfc5234>.
[RFC7230] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
Protocol (HTTP/1.1): Message Syntax and Routing",
RFC 7230, DOI 10.17487/RFC7230, June 2014,
<https://www.rfc-editor.org/info/rfc7230>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
Nottingham & Kamp Expires August 5, 2018 [Page 16]
Internet-Draft Structured Headers for HTTP February 2018
7.2. Informative References
[IEEE754] IEEE, "IEEE Standard for Floating-Point Arithmetic", 2008,
<http://grouper.ieee.org/groups/754/>.
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifier (URI): Generic Syntax", STD 66,
RFC 3986, DOI 10.17487/RFC3986, January 2005,
<https://www.rfc-editor.org/info/rfc3986>.
[RFC7231] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
Protocol (HTTP/1.1): Semantics and Content", RFC 7231,
DOI 10.17487/RFC7231, June 2014,
<https://www.rfc-editor.org/info/rfc7231>.
[RFC7540] Belshe, M., Peon, R., and M. Thomson, Ed., "Hypertext
Transfer Protocol Version 2 (HTTP/2)", RFC 7540,
DOI 10.17487/RFC7540, May 2015,
<https://www.rfc-editor.org/info/rfc7540>.
7.3. URIs
[1] https://lists.w3.org/Archives/Public/ietf-http-wg/
[2] https://httpwg.github.io/
[3] https://github.com/httpwg/http-extensions/labels/header-structure
Appendix A. Changes
A.1. Since draft-ietf-httpbis-header-structure-02
o Split Numbers into Integers and Floats.
o Define number parsing.
o Tighten up binary parsing and give it an explicit end delimiter.
o Clarify that mappings are unordered.
o Allow zero-length strings.
o Improve string parsing algorithm.
o Improve limits in algorithms.
o Require parsers to combine header fields before processing.
Nottingham & Kamp Expires August 5, 2018 [Page 17]
Internet-Draft Structured Headers for HTTP February 2018
o Throw an error on trailing garbage.
A.2. Since draft-ietf-httpbis-header-structure-01
o Replaced with draft-nottingham-structured-headers.
A.3. Since draft-ietf-httpbis-header-structure-00
o Added signed 64bit integer type.
o Drop UTF8, and settle on BCP137 ::EmbeddedUnicodeChar for h1-
unicode-string.
o Change h1_blob delimiter to ":" since "'" is valid t_char
Authors' Addresses
Mark Nottingham
Fastly
Email: mnot@mnot.net
URI: https://www.mnot.net/
Poul-Henning Kamp
The Varnish Cache Project
Email: phk@varnish-cache.org
Nottingham & Kamp Expires August 5, 2018 [Page 18]
