HTTP                                                       M. Nottingham
Internet-Draft                                                    Fastly
Intended status: Standards Track                               P-H. Kamp
Expires: December 1, 2018                      The Varnish Cache Project
                                                            May 30, 2018


                      Structured Headers for HTTP
                 draft-ietf-httpbis-header-structure-05

Abstract

   This document describes a set of data types and parsing algorithms
   associated with them that are intended to make it easier and safer to
   define and handle HTTP header fields.  It is intended for use by new
   specifications of HTTP header fields as well as revisions of existing
   header field specifications when doing so does not cause
   interoperability issues.

Note to Readers

   _RFC EDITOR: please remove this section before publication_

   Discussion of this draft takes place on the HTTP working group
   mailing list (ietf-http-wg@w3.org), which is archived at
   https://lists.w3.org/Archives/Public/ietf-http-wg/ [1].

   Working Group information can be found at https://httpwg.github.io/
   [2]; source code and issues list for this draft can be found at
   https://github.com/httpwg/http-extensions/labels/header-structure
   [3].

   Tests for implementations are collected at https://github.com/httpwg/
   structured-header-tests [4].

   Implementations are tracked at https://github.com/httpwg/wiki/wiki/
   Structured-Headers [5].

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.




Nottingham & Kamp       Expires December 1, 2018                [Page 1]


Internet-Draft         Structured Headers for HTTP              May 2018


   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on December 1, 2018.

Copyright Notice

   Copyright (c) 2018 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Notational Conventions  . . . . . . . . . . . . . . . . .   4
   2.  Defining New Structured Headers . . . . . . . . . . . . . . .   4
   3.  Parsing Textual Header Fields . . . . . . . . . . . . . . . .   6
   4.  Structured Header Data Types  . . . . . . . . . . . . . . . .   7
     4.1.  Dictionaries  . . . . . . . . . . . . . . . . . . . . . .   7
     4.2.  Lists . . . . . . . . . . . . . . . . . . . . . . . . . .   8
     4.3.  Parameterised Lists . . . . . . . . . . . . . . . . . . .   9
     4.4.  Items . . . . . . . . . . . . . . . . . . . . . . . . . .  11
     4.5.  Integers  . . . . . . . . . . . . . . . . . . . . . . . .  12
     4.6.  Floats  . . . . . . . . . . . . . . . . . . . . . . . . .  13
     4.7.  Strings . . . . . . . . . . . . . . . . . . . . . . . . .  14
     4.8.  Identifiers . . . . . . . . . . . . . . . . . . . . . . .  15
     4.9.  Binary Content  . . . . . . . . . . . . . . . . . . . . .  16
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  17
   6.  Security Considerations . . . . . . . . . . . . . . . . . . .  17
   7.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  17
     7.1.  Normative References  . . . . . . . . . . . . . . . . . .  18
     7.2.  Informative References  . . . . . . . . . . . . . . . . .  18
     7.3.  URIs  . . . . . . . . . . . . . . . . . . . . . . . . . .  19
   Appendix A.  Changes  . . . . . . . . . . . . . . . . . . . . . .  19
     A.1.  Since draft-ietf-httpbis-header-structure-04  . . . . . .  19
     A.2.  Since draft-ietf-httpbis-header-structure-03  . . . . . .  19
     A.3.  Since draft-ietf-httpbis-header-structure-02  . . . . . .  19



Nottingham & Kamp       Expires December 1, 2018                [Page 2]


Internet-Draft         Structured Headers for HTTP              May 2018


     A.4.  Since draft-ietf-httpbis-header-structure-01  . . . . . .  20
     A.5.  Since draft-ietf-httpbis-header-structure-00  . . . . . .  20
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  20

1.  Introduction

   Specifying the syntax of new HTTP header fields is an onerous task;
   even with the guidance in [RFC7231], Section 8.3.1, there are many
   decisions - and pitfalls - for a prospective HTTP header field
   author.

   Once a header field is defined, bespoke parsers for it often need to
   be written, because each header has slightly different handling of
   what looks like common syntax.

   This document introduces a set of common data structures for use in
   HTTP header field values to address these problems.  In particular,
   it defines a generic, abstract model for header field values, along
   with a concrete serialisation for expressing that model in textual
   HTTP headers, as used by HTTP/1 [RFC7230] and HTTP/2 [RFC7540].

   HTTP headers that are defined as "Structured Headers" use the types
   defined in this specification to define their syntax and basic
   handling rules, thereby simplifying both their definition and
   parsing.

   Additionally, future versions of HTTP can define alternative
   serialisations of the abstract model of these structures, allowing
   headers that use it to be transmitted more efficiently without being
   redefined.

   Note that it is not a goal of this document to redefine the syntax of
   existing HTTP headers; the mechanisms described herein are only
   intended to be used with headers that explicitly opt into them.

   To specify a header field that is a Structured Header, see Section 2.

   Section 4 defines a number of abstract data types that can be used in
   Structured Headers.  Dictionaries and lists are only usable at the
   "top" level, while the remaining types can be specified appear at the
   top level or inside those structures.

   Those abstract types can be serialised into textual headers - such as
   those used in HTTP/1 and HTTP/2 - using the algorithms described in
   Section 3.






Nottingham & Kamp       Expires December 1, 2018                [Page 3]


Internet-Draft         Structured Headers for HTTP              May 2018


1.1.  Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   This document uses the Augmented Backus-Naur Form (ABNF) notation of
   [RFC5234], including the DIGIT, ALPHA and DQUOTE rules from that
   document.  It also includes the OWS rule from [RFC7230].

   This document uses algorithms to specify normative parsing
   behaviours, and ABNF to illustrate the on-wire format expected.
   Implementations MUST follow the normative algorithms, but MAY vary in
   implementation so as the behaviours are indistinguishable from
   specified behaviour.  If there is disagreement between the algorithms
   and ABNF, the specified algorithms take precedence.

2.  Defining New Structured Headers

   A HTTP header that uses the structures in this specification need to
   be defined to do so explicitly; recipients and generators need to
   know that the requirements of this document are in effect.  The
   simplest way to do that is by referencing this document in its
   definition.

   The field's definition will also need to specify the field-value's
   allowed syntax, in terms of the types described in Section 4, along
   with their associated semantics.

   A header field definition cannot relax or otherwise modify the
   requirements of this specification, or change the nature of its data
   structures; doing so would preclude handling by generic software.

   However, header field authors are encouraged to clearly state
   additional constraints upon the syntax, as well as the consequences
   when those constraints are violated.  When Structured Headers parsing
   fails, the header is discarded (see Section 3); in most situations,
   header-specific constraints should do likewise.

   Such constraints could include additional structure inside those
   defined here (e.g., a list of URLs [RFC3986] inside a string).

   For example:






Nottingham & Kamp       Expires December 1, 2018                [Page 4]


Internet-Draft         Structured Headers for HTTP              May 2018


   # Foo-Example Header

   The Foo-Example HTTP header field conveys information about how
   much Foo the message has.

   Foo-Example is a Structured Header [RFCxxxx]. Its value MUST be a
   dictionary ([RFCxxxx], Section Y.Y).

   The dictionary MUST contain:

   * Exactly one member whose key is "foo", and whose value is an
     integer ([RFCxxxx], Section Y.Y), indicating the number of foos in
     the message.
   * Exactly one member whose key is "barUrls", and whose value is a
     string ([RFCxxxx], Section Y.Y), conveying the Bar URLs for the
     message. See below for processing requirements.

   If the parsed header field does not contain both, it MUST be ignored.

   "foo" MUST be between 0 and 10, inclusive; other values MUST cause
   the header to be ignored.

   "barUrls" contains a space-separated list of URI-references
   ([RFC3986], Section 4.1):

      barURLs = URI-reference *( 1*SP URI-reference )

   If a member of barURLs is not a valid URI-reference, it MUST cause
   that value to be ignored.

   If a member of barURLs is a relative reference ([RFC3986],
   Section 4.2), it MUST be resolved ([RFC3986], Section 5) before being
   used.

   This specification defines minimums for the length or number of
   various structures supported by Structured Headers implementations.
   It does not specify maximum sizes in most cases, but header authors
   should be aware that HTTP implementations do impose various limits on
   the size of individual header fields, the total number of fields,
   and/or the size of the entire header block.

   Note that specifications using Structured Headers do not re-specify
   its ABNF or parsing algorithms; instead, they should be specified in
   terms of its abstract data structures.

   Also, empty header field values are not allowed, and therefore
   parsing for them will fail.




Nottingham & Kamp       Expires December 1, 2018                [Page 5]


Internet-Draft         Structured Headers for HTTP              May 2018


3.  Parsing Textual Header Fields

   When a receiving implementation parses textual HTTP header fields
   (e.g., in HTTP/1 or HTTP/2) that are known to be Structured Headers,
   it is important that care be taken, as there are a number of edge
   cases that can cause interoperability or even security problems.
   This section specifies the algorithm for doing so.

   Given an ASCII string input_string that represents the chosen
   header's field-value, and header_type, one of "dictionary", "list",
   "param-list", or "item", return the parsed header value.

   1.  Discard any leading OWS from input_string.

   2.  If header_type is "dictionary", let output be the result of
       Parsing a Dictionary from Text (Section 4.1.1).

   3.  If header_type is "list", let output be the result of Parsing a
       List from Text (Section 4.2.1).

   4.  If header_type is "param-list", let output be the result of
       Parsing a Parameterised List from Text (Section 4.3.1).

   5.  Otherwise, let output be the result of Parsing an Item from Text
       (Section 4.4.1).

   6.  Discard any leading OWS from input_string.

   7.  If input_string is not empty, fail parsing.

   8.  Otherwise, return output.

   When generating input_string, parsers MUST combine all instances of
   the target header field into one comma-separated field-value, as per
   [RFC7230], Section 3.2.2; this assures that the header is processed
   correctly.

   For Lists, Parameterised Lists and Dictionaries, this has the effect
   of correctly concatenating all instances of the header field.

   Strings can but SHOULD NOT be split across multiple header instances,
   because comma(s) inserted upon combination will become part of the
   string output by the parser.

   Integers, Floats and Binary Content cannot be split across multiple
   headers because the inserted commas will cause parsing to fail.





Nottingham & Kamp       Expires December 1, 2018                [Page 6]


Internet-Draft         Structured Headers for HTTP              May 2018


   If parsing fails - including when calling another algorithm - the
   entire header field's value MUST be discarded.  This is intentionally
   strict, to improve interoperability and safety, and specifications
   referencing this document cannot loosen this requirement.

   Note that this has the effect of discarding any header field with
   non-ASCII characters in input_string.

4.  Structured Header Data Types

   This section defines the abstract value types that can be composed
   into Structured Headers, along with the textual HTTP serialisations
   of them.

4.1.  Dictionaries

   Dictionaries are unordered maps of key-value pairs, where the keys
   are identifiers (Section 4.8) and the values are items (Section 4.4).
   There can be one or more members, and keys are required to be unique.

   In the textual HTTP serialisation, keys and values are separated by
   "=" (without whitespace), and key/value pairs are separated by a
   comma with optional whitespace.  Duplicate keys MUST cause parsing to
   fail.

   dictionary  = dict-member *( OWS "," OWS dict-member )
   dict-member = identifier "=" item

   For example, a header field whose value is defined as a dictionary
   could look like:

   Example-DictHeader: foo=1.23, en="Applepie", da=*w4ZibGV0w6ZydGUK=*

   Typically, a header field specification will define the semantics of
   individual keys, as well as whether their presence is required or
   optional.  Recipients MUST ignore keys that are undefined or unknown,
   unless the header field's specification specifically disallows them.

   Parsers MUST support dictionaries containing at least 1024 key/value
   pairs.

4.1.1.  Parsing a Dictionary from Text

   Given an ASCII string input_string, return a mapping of (identifier,
   item). input_string is modified to remove the parsed value.

   1.  Let dictionary be an empty, unordered mapping.




Nottingham & Kamp       Expires December 1, 2018                [Page 7]


Internet-Draft         Structured Headers for HTTP              May 2018


   2.  While input_string is not empty:

       1.   Let this_key be the result of running Parse Identifier from
            Text (Section 4.8.1) with input_string.

       2.   If dictionary already contains this_key, fail parsing.

       3.   Consume a "=" from input_string; if none is present, fail
            parsing.

       4.   Let this_value be the result of running Parse Item from Text
            (Section 4.4.1) with input_string.

       5.   Add key this_key with value this_value to dictionary.

       6.   Discard any leading OWS from input_string.

       7.   If input_string is empty, return dictionary.

       8.   Consume a COMMA from input_string; if no comma is present,
            fail parsing.

       9.   Discard any leading OWS from input_string.

       10.  If input_string is empty, fail parsing.

   3.  No structured data has been found; fail parsing.

4.2.  Lists

   Lists are arrays of items (Section 4.4) with one or more members.

   In the textual HTTP serialisation, each member is separated by a
   comma and optional whitespace.

   list = list-member *( OWS "," OWS list-member )
   list-member = item

   For example, a header field whose value is defined as a list of
   strings could look like:

   Example-StrListHeader: "foo", "bar", "It was the best of times."

   Parsers MUST support lists containing at least 1024 members.







Nottingham & Kamp       Expires December 1, 2018                [Page 8]


Internet-Draft         Structured Headers for HTTP              May 2018


4.2.1.  Parsing a List from Text

   Given an ASCII string input_string, return a list of items.
   input_string is modified to remove the parsed value.

   1.  Let items be an empty array.

   2.  While input_string is not empty:

       1.  Let item be the result of running Parse Item from Text
           (Section 4.4.1) with input_string.

       2.  Append item to items.

       3.  Discard any leading OWS from input_string.

       4.  If input_string is empty, return items.

       5.  Consume a COMMA from input_string; if no comma is present,
           fail parsing.

       6.  Discard any leading OWS from input_string.

       7.  If input_string is empty, fail parsing.

   3.  No structured data has been found; fail parsing.

4.3.  Parameterised Lists

   Parameterised Lists are arrays of a parameterised identifiers.

   A parameterised identifier is an identifier (Section 4.8) with an
   optional set of parameters, each parameter having a identifier and an
   optional value that is an item (Section 4.4).  Ordering between
   parameters is not significant, and duplicate parameters MUST cause
   parsing to fail.

   In the textual HTTP serialisation, each parameterised identifier is
   separated by a comma and optional whitespace.  Parameters are
   delimited from each other using semicolons (";"), and equals ("=")
   delimits the parameter name from its value.

   param-list = param-id *( OWS "," OWS param-id )
   param-id   = identifier *( OWS ";" OWS identifier [ "=" item ] )

   For example,

  Example-ParamListHeader: abc_123;a=1;b=2; c, def_456, ghi;q="19";r=foo



Nottingham & Kamp       Expires December 1, 2018                [Page 9]


Internet-Draft         Structured Headers for HTTP              May 2018


   Parsers MUST support parameterised lists containing at least 1024
   members, and support members with at least 256 parameters.

4.3.1.  Parsing a Parameterised List from Text

   Given an ASCII string input_string, return a list of parameterised
   identifiers. input_string is modified to remove the parsed value.

   1.  Let items be an empty array.

   2.  While input_string is not empty:

       1.  Let item be the result of running Parse Parameterised
           Identifier from Text (Section 4.3.2) with input_string.

       2.  Append item to items.

       3.  Discard any leading OWS from input_string.

       4.  If input_string is empty, return items.

       5.  Consume a COMMA from input_string; if no comma is present,
           fail parsing.

       6.  Discard any leading OWS from input_string.

       7.  If input_string is empty, fail parsing.

   3.  No structured data has been found; fail parsing.

4.3.2.  Parsing a Parameterised Identifier from Text

   Given an ASCII string input_string, return a identifier with an
   mapping of parameters. input_string is modified to remove the parsed
   value.

   1.  Let primary_identifier be the result of Parsing a Identifier from
       Text (Section 4.8.1) from input_string.

   2.  Let parameters be an empty, unordered mapping.

   3.  In a loop:

       1.  Discard any leading OWS from input_string.

       2.  If the first character of input_string is not ";", exit the
           loop.




Nottingham & Kamp       Expires December 1, 2018               [Page 10]


Internet-Draft         Structured Headers for HTTP              May 2018


       3.  Consume a ";" character from the beginning of input_string.

       4.  Discard any leading OWS from input_string.

       5.  let param_name be the result of Parsing a Identifier from
           Text (Section 4.8.1) from input_string.

       6.  If param_name is already present in parameters, fail parsing.

       7.  Let param_value be a null value.

       8.  If the first character of input_string is "=":

           1.  Consume the "=" character at the beginning of
               input_string.

           2.  Let param_value be the result of Parsing an Item from
               Text (Section 4.4.1) from input_string.

       9.  Insert (param_name, param_value) into parameters.

   4.  Return the tuple (primary_identifier, parameters).

4.4.  Items

   An item is can be a integer (Section 4.5), float (Section 4.6),
   string (Section 4.7), or binary content (Section 4.9).

   item = integer / float / string / binary

4.4.1.  Parsing an Item from Text

   Given an ASCII string input_string, return an item. input_string is
   modified to remove the parsed value.

   1.  Discard any leading OWS from input_string.

   2.  If the first character of input_string is a "-" or a DIGIT,
       process input_string as a number (Section 4.5.1) and return the
       result.

   3.  If the first character of input_string is a DQUOTE, process
       input_string as a string (Section 4.7.1) and return the result.

   4.  If the first character of input_string is "*", process
       input_string as binary content (Section 4.9.1) and return the
       result.




Nottingham & Kamp       Expires December 1, 2018               [Page 11]


Internet-Draft         Structured Headers for HTTP              May 2018


   5.  Otherwise, fail parsing.

4.5.  Integers

   Abstractly, integers have a range of -9,223,372,036,854,775,808 to
   9,223,372,036,854,775,807 inclusive (i.e., a 64-bit signed integer).

   integer   = ["-"] 1*19DIGIT

   Parsers that encounter an integer outside the range defined above
   MUST fail parsing.  Therefore, the value "9223372036854775808" would
   be invalid.  Likewise, values that do not conform to the ABNF above
   are invalid, and MUST fail parsing.

   For example, a header whose value is defined as a integer could look
   like:

   Example-IntegerHeader: 42

4.5.1.  Parsing a Number from Text

   NOTE: This algorithm parses both Integers and Floats Section 4.6, and
   returns the corresponding structure.

   1.   Let type be "integer".

   2.   Let sign be 1.

   3.   Let input_number be an empty string.

   4.   If the first character of input_string is "-", remove it from
        input_string and set sign to -1.

   5.   If input_string is empty, fail parsing.

   6.   If the first character of input_string is not a DIGIT, fail
        parsing.

   7.   While input_string is not empty:

        1.  Let char be the result of removing the first character of
            input_string.

        2.  If char is a DIGIT, append it to input_number.

        3.  Else, if type is "integer" and char is ".", append char to
            input_number and set type to "float".




Nottingham & Kamp       Expires December 1, 2018               [Page 12]


Internet-Draft         Structured Headers for HTTP              May 2018


        4.  Otherwise, fail parsing.

        5.  If type is "integer" and input_number contains more than 19
            characters, fail parsing.

        6.  If type is "float" and input_number contains more than 16
            characters, fail parsing.

   8.   If type is "integer", parse input_number as an integer and let
        output_number be the result.

   9.   Otherwise:

        1.  If the final character of input_number is ".", fail parsing.

        2.  Parse input_number as a float and let output_number be the
            result.

   10.  Return the product of output_number and sign.

4.6.  Floats

   Abstractly, floats are integers with a fractional part, that can be
   stored as IEEE 754 double precision numbers (binary64) ([IEEE754]).

   The textual HTTP serialisation of floats allows a maximum of fifteen
   digits between the integer and fractional part, with at least one
   required on each side, along with an optional "-" indicating negative
   numbers.

   float    = ["-"] (
                DIGIT "." 1*14DIGIT /
               2DIGIT "." 1*13DIGIT /
               3DIGIT "." 1*12DIGIT /
               4DIGIT "." 1*11DIGIT /
               5DIGIT "." 1*10DIGIT /
               6DIGIT "." 1*9DIGIT /
               7DIGIT "." 1*8DIGIT /
               8DIGIT "." 1*7DIGIT /
               9DIGIT "." 1*6DIGIT /
              10DIGIT "." 1*5DIGIT /
              11DIGIT "." 1*4DIGIT /
              12DIGIT "." 1*3DIGIT /
              13DIGIT "." 1*2DIGIT /
              14DIGIT "." 1DIGIT )

   Values that do not conform to the ABNF above are invalid, and MUST
   fail parsing.



Nottingham & Kamp       Expires December 1, 2018               [Page 13]


Internet-Draft         Structured Headers for HTTP              May 2018


   For example, a header whose value is defined as a float could look
   like:

   Example-FloatHeader: 4.5

   See Section 4.5.1 for the parsing algorithm for floats.

4.7.  Strings

   Abstractly, strings are zero or more printable ASCII [RFC0020]
   characters (i.e., the range 0x20 to 0x7E).  Note that this excludes
   tabs, newlines, carriage returns, etc.

   The textual HTTP serialisation of strings uses a backslash ("\") to
   escape double quotes and backslashes in strings.

   string    = DQUOTE *(chr) DQUOTE
   chr       = unescaped / escaped
   unescaped = %x20-21 / %x23-5B / %x5D-7E
   escaped   = "\" ( DQUOTE / "\" )

   For example, a header whose value is defined as a string could look
   like:

   Example-StringHeader: "hello world"

   Note that strings only use DQUOTE as a delimiter; single quotes do
   not delimit strings.  Furthermore, only DQUOTE and "\" can be
   escaped; other sequences MUST cause parsing to fail.

   Unicode is not directly supported in this document, because it causes
   a number of interoperability issues, and - with few exceptions -
   header values do not require it.

   When it is necessary for a field value to convey non-ASCII string
   content, binary content (Section 4.9) SHOULD be specified, along with
   a character encoding (preferably, UTF-8).

   Parsers MUST support strings with at least 1024 characters.

4.7.1.  Parsing a String from Text

   Given an ASCII string input_string, return an unquoted string.
   input_string is modified to remove the parsed value.

   1.  Let output_string be an empty string.





Nottingham & Kamp       Expires December 1, 2018               [Page 14]


Internet-Draft         Structured Headers for HTTP              May 2018


   2.  If the first character of input_string is not DQUOTE, fail
       parsing.

   3.  Discard the first character of input_string.

   4.  While input_string is not empty:

       1.  Let char be the result of removing the first character of
           input_string.

       2.  If char is a backslash ("\"):

           1.  If input_string is now empty, fail parsing.

           2.  Else:

               1.  Let next_char be the result of removing the first
                   character of input_string.

               2.  If next_char is not DQUOTE or "\", fail parsing.

               3.  Append next_char to output_string.

       3.  Else, if char is DQUOTE, return output_string.

       4.  Else, append char to output_string.

   5.  Otherwise, fail parsing.

4.8.  Identifiers

   Identifiers are short textual identifiers; their abstract model is
   identical to their expression in the textual HTTP serialisation.
   Parsers MUST support identifiers with at least 64 characters.

   identifier = lcalpha *( lcalpha / DIGIT / "_" / "-"/ "*" / "/" )
   lcalpha    = %x61-7A ; a-z

   Note that identifiers can only contain lowercase letters.

4.8.1.  Parsing a Identifier from Text

   Given an ASCII string input_string, return a identifier. input_string
   is modified to remove the parsed value.

   1.  If the first character of input_string is not lcalpha, fail
       parsing.




Nottingham & Kamp       Expires December 1, 2018               [Page 15]


Internet-Draft         Structured Headers for HTTP              May 2018


   2.  Let output_string be an empty string.

   3.  While input_string is not empty:

       1.  Let char be the result of removing the first character of
           input_string.

       2.  If char is not one of lcalpha, DIGIT, "_", "-", "*" or "/":

           1.  Prepend char to input_string.

           2.  Return output_string.

       3.  Append char to output_string.

   4.  Return output_string.

4.9.  Binary Content

   Arbitrary binary content can be conveyed in Structured Headers.

   The textual HTTP serialisation encodes the data using Base 64
   Encoding [RFC4648], Section 4, and surrounds it with a pair of
   asterisks ("*") to delimit from other content.

   The encoded data is required to be padded with "=", as per [RFC4648],
   Section 3.2.  It is RECOMMENDED that parsers reject encoded data that
   is not properly padded, although this might not be possible with some
   base64 implementations.

   Likewise, encoded data is required to have pad bits set to zero, as
   per [RFC4648], Section 3.5.  It is RECOMMENDED that parsers fail on
   encoded data that has non-zero pad bits, although this might not be
   possible with some base64 implementations.

   This specification does not relax the requirements in [RFC4648],
   Section 3.1 and 3.3; therefore, parsers MUST fail on characters
   outside the base64 alphabet, and on line feeds in encoded data.

   binary = "*" *(base64) "*"
   base64 = ALPHA / DIGIT / "+" / "/" / "="

   For example, a header whose value is defined as binary content could
   look like:

   Example-BinaryHeader: *cHJldGVuZCB0aGlzIGlzIGJpbmFyeSBjb250ZW50Lg==*





Nottingham & Kamp       Expires December 1, 2018               [Page 16]


Internet-Draft         Structured Headers for HTTP              May 2018


   Parsers MUST support binary content with at least 16384 octets after
   decoding.

4.9.1.  Parsing Binary Content from Text

   Given an ASCII string input_string, return binary content.
   input_string is modified to remove the parsed value.

   1.  If the first character of input_string is not "*", fail parsing.

   2.  Discard the first character of input_string.

   3.  Let b64_content be the result of removing content of input_string
       up to but not including the first instance of the character "*".
       If there is not a "*" character before the end of input_string,
       fail parsing.

   4.  Consume the "*" character at the beginning of input_string.

   5.  Let binary_content be the result of Base 64 Decoding [RFC4648]
       b64_content, synthesising padding if necessary (note the
       requirements about recipient behaviour in Section 4.9).

   6.  Return binary_content.

5.  IANA Considerations

   This draft has no actions for IANA.

6.  Security Considerations

   The size of most types defined by Structured Headers is not limited;
   as a result, extremely large header fields could be an attack vector
   (e.g., for resource consumption).  Most HTTP implementations limit
   the sizes of size of individual header fields as well as the overall
   header block size to mitigate such attacks.

   It is possible for parties with the ability to inject new HTTP header
   fields to change the meaning of a Structured Headers.  In some
   circumstances, this will cause parsing to fail, but it is not
   possible to reliably fail in all such circumstances.

7.  References








Nottingham & Kamp       Expires December 1, 2018               [Page 17]


Internet-Draft         Structured Headers for HTTP              May 2018


7.1.  Normative References

   [RFC0020]  Cerf, V., "ASCII format for network interchange", STD 80,
              RFC 20, DOI 10.17487/RFC0020, October 1969,
              <https://www.rfc-editor.org/info/rfc20>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC4648]  Josefsson, S., "The Base16, Base32, and Base64 Data
              Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006,
              <https://www.rfc-editor.org/info/rfc4648>.

   [RFC5234]  Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234,
              DOI 10.17487/RFC5234, January 2008,
              <https://www.rfc-editor.org/info/rfc5234>.

   [RFC7230]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Message Syntax and Routing",
              RFC 7230, DOI 10.17487/RFC7230, June 2014,
              <https://www.rfc-editor.org/info/rfc7230>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

7.2.  Informative References

   [IEEE754]  IEEE, "IEEE Standard for Floating-Point Arithmetic",
              IEEE 754-2008, DOI 10.1109/IEEESTD.2008.4610935,
              ISBN 978-0-7381-5752-8, August 2008,
              <http://ieeexplore.ieee.org/document/4610935/>.

              See also http://grouper.ieee.org/groups/754/ [6].

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, DOI 10.17487/RFC3986, January 2005,
              <https://www.rfc-editor.org/info/rfc3986>.

   [RFC7231]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Semantics and Content", RFC 7231,
              DOI 10.17487/RFC7231, June 2014,
              <https://www.rfc-editor.org/info/rfc7231>.




Nottingham & Kamp       Expires December 1, 2018               [Page 18]


Internet-Draft         Structured Headers for HTTP              May 2018


   [RFC7540]  Belshe, M., Peon, R., and M. Thomson, Ed., "Hypertext
              Transfer Protocol Version 2 (HTTP/2)", RFC 7540,
              DOI 10.17487/RFC7540, May 2015,
              <https://www.rfc-editor.org/info/rfc7540>.

7.3.  URIs

   [1] https://lists.w3.org/Archives/Public/ietf-http-wg/

   [2] https://httpwg.github.io/

   [3] https://github.com/httpwg/http-extensions/labels/header-structure

   [4] https://github.com/httpwg/structured-header-tests

   [5] https://github.com/httpwg/wiki/wiki/Structured-Headers

Appendix A.  Changes

A.1.  Since draft-ietf-httpbis-header-structure-04

   o  Remove identifiers from item.

   o  Remove most limits on sizes.

   o  Refine number parsing.

A.2.  Since draft-ietf-httpbis-header-structure-03

   o  Strengthen language around failure handling.

A.3.  Since draft-ietf-httpbis-header-structure-02

   o  Split Numbers into Integers and Floats.

   o  Define number parsing.

   o  Tighten up binary parsing and give it an explicit end delimiter.

   o  Clarify that mappings are unordered.

   o  Allow zero-length strings.

   o  Improve string parsing algorithm.

   o  Improve limits in algorithms.

   o  Require parsers to combine header fields before processing.



Nottingham & Kamp       Expires December 1, 2018               [Page 19]


Internet-Draft         Structured Headers for HTTP              May 2018


   o  Throw an error on trailing garbage.

A.4.  Since draft-ietf-httpbis-header-structure-01

   o  Replaced with draft-nottingham-structured-headers.

A.5.  Since draft-ietf-httpbis-header-structure-00

   o  Added signed 64bit integer type.

   o  Drop UTF8, and settle on BCP137 ::EmbeddedUnicodeChar for h1-
      unicode-string.

   o  Change h1_blob delimiter to ":" since "'" is valid t_char

Authors' Addresses

   Mark Nottingham
   Fastly

   Email: mnot@mnot.net
   URI:   https://www.mnot.net/


   Poul-Henning Kamp
   The Varnish Cache Project

   Email: phk@varnish-cache.org























Nottingham & Kamp       Expires December 1, 2018               [Page 20]