HyBi Working Group                                              I. Fette
Internet-Draft                                              Google, Inc.
Intended status: Standards Track                        October 17, 2010
Expires: April 20, 2011


                         The WebSocket protocol
                draft-ietf-hybi-thewebsocketprotocol-03

Abstract

   The WebSocket protocol enables two-way communication between a user
   agent running untrusted code running in a controlled environment to a
   remote host that has opted-in to communications from that code.  The
   security model used for this is the Origin-based security model
   commonly used by Web browsers.  The protocol consists of an initial
   handshake followed by basic message framing, layered over TCP.  The
   goal of this technology is to provide a mechanism for browser-based
   applications that need two-way communication with servers that does
   not rely on opening multiple HTTP connections (e.g. using
   XMLHttpRequest or <iframe>s and long polling).

   Please send feedback to the hybi@ietf.org mailing list.




























Fette                    Expires April 20, 2011                 [Page 1]


Internet-Draft           The WebSocket protocol             October 2010


Note

   This draft is meant to reflect changes in direction in the HyBi
   working group.  There is not yet consensus on everything in this
   draft.  Specifically, details about the framing are still under
   discussion, however this draft is much closer to what the group is
   discussing than the previous draft.  There have also been proposals
   to change the handshake, so the handshake is also not in a final
   form.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on April 20, 2011.

Copyright Notice

   Copyright (c) 2010 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.










Fette                    Expires April 20, 2011                 [Page 2]


Internet-Draft           The WebSocket protocol             October 2010


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  5
     1.1.  Background . . . . . . . . . . . . . . . . . . . . . . . .  5
     1.2.  Protocol overview  . . . . . . . . . . . . . . . . . . . .  5
     1.3.  Opening handshake  . . . . . . . . . . . . . . . . . . . .  8
     1.4.  Closing handshake  . . . . . . . . . . . . . . . . . . . . 11
     1.5.  Design philosophy  . . . . . . . . . . . . . . . . . . . . 12
     1.6.  Security model . . . . . . . . . . . . . . . . . . . . . . 12
     1.7.  Relationship to TCP and HTTP . . . . . . . . . . . . . . . 13
     1.8.  Establishing a connection  . . . . . . . . . . . . . . . . 13
     1.9.  Subprotocols using the WebSocket protocol  . . . . . . . . 14
   2.  Conformance requirements . . . . . . . . . . . . . . . . . . . 15
     2.1.  Terminology  . . . . . . . . . . . . . . . . . . . . . . . 15
   3.  WebSocket URLs . . . . . . . . . . . . . . . . . . . . . . . . 17
     3.1.  Parsing WebSocket URLs . . . . . . . . . . . . . . . . . . 17
     3.2.  Constructing WebSocket URLs  . . . . . . . . . . . . . . . 18
     3.3.  Valid WebSocket URLs . . . . . . . . . . . . . . . . . . . 18
   4.  Data Framing . . . . . . . . . . . . . . . . . . . . . . . . . 20
     4.1.  Overview . . . . . . . . . . . . . . . . . . . . . . . . . 20
     4.2.  Base Framing Protocol  . . . . . . . . . . . . . . . . . . 20
     4.3.  Fragmentation  . . . . . . . . . . . . . . . . . . . . . . 22
     4.4.  Control Frames . . . . . . . . . . . . . . . . . . . . . . 23
       4.4.1.  Close  . . . . . . . . . . . . . . . . . . . . . . . . 23
       4.4.2.  Ping . . . . . . . . . . . . . . . . . . . . . . . . . 24
       4.4.3.  Pong . . . . . . . . . . . . . . . . . . . . . . . . . 24
     4.5.  Data Frames  . . . . . . . . . . . . . . . . . . . . . . . 24
     4.6.  Examples . . . . . . . . . . . . . . . . . . . . . . . . . 24
     4.7.  Extensibility  . . . . . . . . . . . . . . . . . . . . . . 25
   5.  Opening Handshake  . . . . . . . . . . . . . . . . . . . . . . 26
     5.1.  Client Requirements  . . . . . . . . . . . . . . . . . . . 26
     5.2.  Server-side requirements . . . . . . . . . . . . . . . . . 36
       5.2.1.  Reading the client's opening handshake . . . . . . . . 36
       5.2.2.  Sending the server's opening handshake . . . . . . . . 39
   6.  Error Handling . . . . . . . . . . . . . . . . . . . . . . . . 44
     6.1.  Handling errors in UTF-8 from the server . . . . . . . . . 44
     6.2.  Handling errors in UTF-8 from the client . . . . . . . . . 44
   7.  Closing the connection . . . . . . . . . . . . . . . . . . . . 45
     7.1.  Client-initiated closure . . . . . . . . . . . . . . . . . 45
     7.2.  Server-initiated closure . . . . . . . . . . . . . . . . . 45
     7.3.  Closure  . . . . . . . . . . . . . . . . . . . . . . . . . 45
   8.  Known extensions . . . . . . . . . . . . . . . . . . . . . . . 47
     8.1.  Compression  . . . . . . . . . . . . . . . . . . . . . . . 47
   9.  Security considerations  . . . . . . . . . . . . . . . . . . . 48
   10. IANA considerations  . . . . . . . . . . . . . . . . . . . . . 49
     10.1. Registration of ws: scheme . . . . . . . . . . . . . . . . 49
     10.2. Registration of wss: scheme  . . . . . . . . . . . . . . . 50
     10.3. Registration of the "WebSocket" HTTP Upgrade keyword . . . 51



Fette                    Expires April 20, 2011                 [Page 3]


Internet-Draft           The WebSocket protocol             October 2010


     10.4. Sec-WebSocket-Key1 and Sec-WebSocket-Key2  . . . . . . . . 51
     10.5. Sec-WebSocket-Location . . . . . . . . . . . . . . . . . . 52
     10.6. Sec-WebSocket-Origin . . . . . . . . . . . . . . . . . . . 53
     10.7. Sec-WebSocket-Protocol . . . . . . . . . . . . . . . . . . 54
     10.8. Sec-WebSocket-Draft  . . . . . . . . . . . . . . . . . . . 54
   11. Using the WebSocket protocol from other specifications . . . . 56
   12. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 57
   13. Normative References . . . . . . . . . . . . . . . . . . . . . 58
   Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 60










































Fette                    Expires April 20, 2011                 [Page 4]


Internet-Draft           The WebSocket protocol             October 2010


1.  Introduction

1.1.  Background

   _This section is non-normative._

   Historically, creating an instant messenger chat client as a Web
   application has required an abuse of HTTP to poll the server for
   updates while sending upstream notifications as distinct HTTP calls.

   This results in a variety of problems:

   o  The server is forced to use a number of different underlying TCP
      connections for each client: one for sending information to the
      client, and a new one for each incoming message.

   o  The wire protocol has a high overhead, with each client-to-server
      message having an HTTP header.

   o  The client-side script is forced to maintain a mapping from the
      outgoing connections to the incoming connection to track replies.

   A simpler solution would be to use a single TCP connection for
   traffic in both directions.  This is what the WebSocket protocol
   provides.  Combined with the WebSocket API, it provides an
   alternative to HTTP polling for two-way communication from a Web page
   to a remote server.  [WSAPI]

   The same technique can be used for a variety of Web applications:
   games, stock tickers, multiuser applications with simultaneous
   editing, user interfaces exposing server-side services in real time,
   etc.

1.2.  Protocol overview

   _This section is non-normative._

   The protocol has two parts: a handshake, and then the data transfer.

   The handshake from the client looks as follows:











Fette                    Expires April 20, 2011                 [Page 5]


Internet-Draft           The WebSocket protocol             October 2010


        GET /demo HTTP/1.1
        Host: example.com
        Connection: Upgrade
        Sec-WebSocket-Key2: 12998 5 Y3 1  .P00
        Sec-WebSocket-Protocol: sample
        Upgrade: WebSocket
        Sec-WebSocket-Key1: 4 @1  46546xW%0l 1 5
        Origin: http://example.com

        ^n:ds[4U

   The handshake from the server looks as follows:


        HTTP/1.1 101 WebSocket Protocol Handshake
        Upgrade: WebSocket
        Connection: Upgrade
        Sec-WebSocket-Origin: http://example.com
        Sec-WebSocket-Location: ws://example.com/demo
        Sec-WebSocket-Protocol: sample

        8jKS'y:G*Co,Wxa-

   The leading line from the client follows the Request-Line format.
   The leading line from the server follows the Status-Line format.  The
   Request-Line and Status-Line productions are defined in the HTTP
   specification.

   After the leading line in both cases come an unordered ASCII case-
   insensitive set of fields, one per line, that each match the
   following non-normative ABNF: [RFC5234] [ANSI.X3-4.1986]




















Fette                    Expires April 20, 2011                 [Page 6]


Internet-Draft           The WebSocket protocol             October 2010


    field         = 1*name-char colon [ space ] *any-char cr lf
    colon         = %x003A ; U+003A COLON (:)
    space         = %x0020 ; U+0020 SPACE
    cr            = %x000D ; U+000D CARRIAGE RETURN (CR)
    lf            = %x000A ; U+000A LINE FEED (LF)
    name-char     = %x0000-0009
                    / %x000B-000C
                    / %x000E-0039
                    / %x003B-10FFFF
                    ; a Unicode character other than
                    ; U+000A LINE FEED (LF),
                    ; U+000D CARRIAGE RETURN (CR),
                    ; or U+003A COLON (:)
    any-char      = %x0000-0009 / %x000B-000C / %x000E-10FFFF
                    ; a Unicode character other than
                    ; U+000A LINE FEED (LF)
                    ; or U+000D CARRIAGE RETURN (CR)

   NOTE: The character set for the above ABNF is Unicode.  The fields
   themselves are encoded as UTF-8.

   Lines that don't match the above production cause the connection to
   be aborted.

   Finally, after the last field, the client sends 10 bytes starting
   with 0x0D 0x0A and followed by 8 random bytes, part of a challenge,
   and the server sends 18 bytes starting with 0x0D 0x0A and followed by
   16 bytes consisting of a challenge response.  The details of this
   challenge and other parts of the handshake are described in the next
   section.


   Once the client and server have both sent their handshakes, and if
   the handshake was successful, then the data transfer part starts.
   This is a two-way communication channel where each side can,
   independently from the other, send data at will.

   Clients and servers, after a successful handshake, transfer data back
   and forth in conceptual units referred to in this specification as
   "messages".  A message is a complete unit of data at an application
   level, with the expectation that many or most applications
   implementing this protocol (such as web user agents) provide APIs in
   terms of sending and receiving messages.  The websocket message does
   not necessarily correspond to a particular network layer framing, as
   a fragmented message may be coalesced, or vice versa, e.g. by an
   intermediary.

   Data is sent on the wire in the form of frames that have an



Fette                    Expires April 20, 2011                 [Page 7]


Internet-Draft           The WebSocket protocol             October 2010


   associated type.  Broadly speaking, there are types for textual data,
   which is interpreted as UTF-8 text, binary data (whose interpretation
   is left up to the application), and control frames, which are not
   intended to carry data for the application, but instead for protocol-
   level signalling, such as to signal that the connection should be
   closed.  This version of the protocol defines six frame types and
   leaves ten reserved for future use.

   The WebSocket protocol uses this framing so that specifications that
   use the WebSocket protocol can expose such connections using an
   event-based mechanism instead of requiring users of those
   specifications to implement buffering and piecing together of
   messages manually.

1.3.  Opening handshake

   _This section is non-normative._

   The opening handshake is intended to be compatible with HTTP-based
   server-side software, so that a single port can be used by both HTTP
   clients talking to that server and WebSocket clients talking to that
   server.  To this end, the WebSocket client's handshake appears to
   HTTP servers to be a regular GET request with an Upgrade offer:


        GET / HTTP/1.1
        Upgrade: WebSocket
        Connection: Upgrade

   Fields in the handshake are sent by the client in a random order; the
   order is not meaningful.

   Additional fields are used to select options in the WebSocket
   protocol.  The only options available in this version are the
   subprotocol selector, |Sec-WebSocket-Protocol|, and |Cookie|, which
   can used for sending cookies to the server (e.g. as an authentication
   mechanism).  The |Sec-WebSocket-Protocol| request-header field can be
   used to indicate what subprotocols (application-level protocols
   layered over the WebSocket protocol) are acceptable to the client.
   The server selects one of the acceptable protocols and echoes that
   value in its handshake to indicate that it has selected that
   protocol.

        Sec-WebSocket-Protocol: chat superchat

   The other fields in the handshake are all security-related.  The
   |Host| field is used to protect against DNS rebinding attacks and to
   allow multiple domains to be served from one IP address.



Fette                    Expires April 20, 2011                 [Page 8]


Internet-Draft           The WebSocket protocol             October 2010


        Host: example.com

   The server includes the hostname in the |Sec-WebSocket-Location|
   field of its handshake, so that both the client and the server can
   verify that they agree on which host is in use.

   The |Origin| field is used to protect against unauthorized cross-
   origin use of a WebSocket server by scripts using the |WebSocket| API
   in a Web browser.  The server specifies which origin it is willing to
   receive requests from by including a |Sec-WebSocket-Origin| field
   with that origin.  If multiple origins are authorized, the server
   echoes the value in the |Origin| field of the client's handshake.

        Origin: http://example.com

   Finally, the server has to prove to the client that it received the
   client's WebSocket handshake, so that the server doesn't accept
   connections that are not WebSocket connections.  This prevents an
   attacker from tricking a WebSocket server by sending it carefully-
   crafted packets using |XMLHttpRequest| or a |form| submission.

   To prove that the handshake was received, the server has to take
   three pieces of information and combine them to form a response.  The
   first two pieces of information come from the |Sec-WebSocket-Key1|
   and |Sec-WebSocket-Key2| fields in the client handshake:


        Sec-WebSocket-Key1: 18x 6]8vM;54 *(5:  {   U1]8  z [  8
        Sec-WebSocket-Key2: 1_ tx7X d  <  nw  334J702) 7]o}` 0

   For each of these fields, the server has to take the digits from the
   value to obtain a number (in this case 1868545188 and 1733470270
   respectively), then divide that number by the number of spaces
   characters in the value (in this case 12 and 10) to obtain a 32-bit
   number (155712099 and 173347027).  These two resulting numbers are
   then used in the server handshake, as described below.

   The counting of spaces is intended to make it impossible to smuggle
   this field into the resource name; making this even harder is the
   presence of _two_ such fields, and the use of a newline as the only
   reliable indicator that the end of the key has been reached.  The use
   of random characters interspersed with the spaces and the numbers
   ensures that the implementor actually looks for spaces and newlines,
   instead of being treating any character like a space, which would
   make it again easy to smuggle the fields into the path and trick the
   server.  Finally, _dividing_ by this number of spaces is intended to
   make sure that even the most naive of implementations will check for
   spaces, since if ther server does not verify that there are some



Fette                    Expires April 20, 2011                 [Page 9]


Internet-Draft           The WebSocket protocol             October 2010


   spaces, the server will try to divide by zero, which is usually fatal
   (a correct handshake will always have at least one space).

   The third piece of information is given after the fields, in the last
   eight bytes of the handshake, expressed here as they would be seen if
   interpreted as UTF-8:

        Tm[K T2u

   The concatenation of the number obtained from processing the |Sec-
   WebSocket-Key1| field, expressed as a big-endian 32 bit number, the
   number obtained from processing the |Sec-WebSocket-Key2| field, again
   expressed as a big-endian 32 bit number, and finally the eight bytes
   at the end of the handshake, form a 128 bit string whose MD5 sum is
   then used by the server to prove that it read the handshake.


   The handshake from the server is much simpler than the client
   handshake.  The first line is an HTTP Status-Line, with the status
   code 101 (the HTTP version and reason phrase aren't important):

        HTTP/1.1 101 WebSocket Protocol Handshake

   The fields follow.  Two of the fields are just for compatibility with
   HTTP:


        Upgrade: WebSocket
        Connection: Upgrade

   Two of the fields are part of the security model described above,
   echoing the origin and stating the exact host, port, resource name,
   and whether the connection is expected to be encrypted:


        Sec-WebSocket-Origin: http://example.com
        Sec-WebSocket-Location: ws://example.com/

   These fields are checked by the Web browser when it is acting as a
   |WebSocket| client for scripted pages.  A server that only handles
   one origin and only serves one resource can therefore just return
   hard-coded values and does not need to parse the client's handshake
   to verify the correctness of the values.

   Option fields can also be included.  In this version of the protocol,
   the main option field is |Sec-WebSocket-Protocol|, which indicates
   the subprotocol that the server has selected.  Web browsers verify
   that the server included one of the values as was specified in the



Fette                    Expires April 20, 2011                [Page 10]


Internet-Draft           The WebSocket protocol             October 2010


   |WebSocket| constructor.A server that speaks multiple subprotocols
   has to make sure it selects one based on the client's handshake and
   specifies it in its handshake.

        Sec-WebSocket-Protocol: chat

   The server can also set cookie-related option fields to _set_
   cookies, as in HTTP.

   After the fields, the server sends the aforementioned MD5 sum, a 16
   byte (128 bit) value, shown here as if interpreted as UTF-8:

        fQJ,fN/4F4!~K~MH

   This value depends on what the client sends, as described above.  If
   it doesn't match what the client is expecting, the client would
   disconnect.

   Having part of the handshake appear after the fields ensures that
   both the server and the client verify that the connection is not
   being interrupted by an HTTP intermediary such as a man-in-the-middle
   cache or proxy.

1.4.  Closing handshake

   _This section is non-normative._

   The closing handshake is far simpler than the opening handshake.

   Either peer can send a control frame with data containing a specified
   control sequence to begin the closing handshake.  Upon receiving such
   a frame, the other peer sends an identical frame in acknowledgement,
   if it hasn't already sent one.  Upon receiving _that_ control frame,
   the first peer then closes the connection, safe in the knowledge that
   no further data is forthcoming.

   After sending a control frame indicating the connection should be
   closed, a peer does not send any further data; after receiving a
   control frame frame indicating the connection should be closed, a
   peer discards any further data received.

   It is safe for both peers to initiate this handshake simultaneously.

   The closing handshake is intended to replace the TCP closing
   handshake (FIN/ACK), on the basis that the TCP closing handshake is
   not always reliable end-to-end, especially in the presence of man-in-
   the-middle proxies and other intermediaries.




Fette                    Expires April 20, 2011                [Page 11]


Internet-Draft           The WebSocket protocol             October 2010


1.5.  Design philosophy

   _This section is non-normative._

   The WebSocket protocol is designed on the principle that there should
   be minimal framing (the only framing that exists is to make the
   protocol frame-based instead of stream-based, and to support a
   distinction between Unicode text and binary frames).  It is expected
   that metadata would be layered on top of WebSocket by the application
   layer, in the same way that metadata is layered on top of TCP by the
   application layer (HTTP).

   Conceptually, WebSocket is really just a layer on top of TCP that
   adds a Web "origin"-based security model for browsers; adds an
   addressing and protocol naming mechanism to support multiple services
   on one port and multiple host names on one IP address; layers a
   framing mechanism on top of TCP to get back to the IP packet
   mechanism that TCP is built on, but without length limits; and
   reimplements the closing handshake in-band.  Other than that, it adds
   nothing.  Basically it is intended to be as close to just exposing
   raw TCP to script as possible given the constraints of the Web. It's
   also designed in such a way that its servers can share a port with
   HTTP servers, by having its handshake be a valid HTTP Upgrade
   handshake also.

   The protocol is intended to be extensible; future versions will
   likely introduce a mechanism to compress data and might support
   sending binary data.

1.6.  Security model

   _This section is non-normative._

   The WebSocket protocol uses the origin model used by Web browsers to
   restrict which Web pages can contact a WebSocket server when the
   WebSocket protocol is used from a Web page.  Naturally, when the
   WebSocket protocol is used by a dedicated client directly (i.e. not
   from a Web page through a Web browser), the origin model is not
   useful, as the client can provide any arbitrary origin string.

   This protocol is intended to fail to establish a connection with
   servers of pre-existing protocols like SMTP or HTTP, while allowing
   HTTP servers to opt-in to supporting this protocol if desired.  This
   is achieved by having a strict and elaborate handshake, and by
   limiting the data that can be inserted into the connection before the
   handshake is finished (thus limiting how much the server can be
   influenced).




Fette                    Expires April 20, 2011                [Page 12]


Internet-Draft           The WebSocket protocol             October 2010


   It is similarly intended to fail to establish a connection when data
   from other protocols, especially HTTP, is sent to a WebSocket server,
   for example as might happen if an HTML |form| were submitted to a
   WebSocket server.  This is primarily achieved by requiring that the
   server prove that it read the handshake, which it can only do if the
   handshake contains the appropriate parts which themselves can only be
   sent by a WebSocket handshake; in particular, fields starting with
   |Sec-| cannot be set by an attacker from a Web browser, even when
   using |XMLHttpRequest|.

1.7.  Relationship to TCP and HTTP

   _This section is non-normative._

   The WebSocket protocol is an independent TCP-based protocol.  Its
   only relationship to HTTP is that its handshake is interpreted by
   HTTP servers as an Upgrade request.

   Based on the expert recommendation of the IANA, the WebSocket
   protocol by default uses port 80 for regular WebSocket connections
   and port 443 for WebSocket connections tunneled over TLS.

1.8.  Establishing a connection

   _This section is non-normative._

   There are several options for establishing a WebSocket connection.

   On the face of it, the simplest method would seem to be to use port
   80 to get a direct connection to a WebSocket server.  Port 80
   traffic, however, will often be intercepted by man-in-the-middle HTTP
   proxies, which can lead to the connection failing to be established.

   The most reliable method, therefore, is to use TLS encryption and
   port 443 to connect directly to a WebSocket server.  This has the
   advantage of being more secure; however, TLS encryption can be
   computationally expensive.

   When a connection is to be made to a port that is shared by an HTTP
   server (a situation that is quite likely to occur with traffic to
   ports 80 and 443), the connection will appear to the HTTP server to
   be a regular GET request with an Upgrade offer.  In relatively simple
   setups with just one IP address and a single server for all traffic
   to a single hostname, this might allow a practical way for systems
   based on the WebSocket protocol to be deployed.  In more elaborate
   setups (e.g. with load balancers and multiple servers), a dedicated
   set of hosts for WebSocket connections separate from the HTTP servers
   is probably easier to manage.



Fette                    Expires April 20, 2011                [Page 13]


Internet-Draft           The WebSocket protocol             October 2010


1.9.  Subprotocols using the WebSocket protocol

   _This section is non-normative._

   The client can request that the server use a specific subprotocol by
   including the |Sec-Websocket-Protocol| field in its handshake.  If it
   is specified, the server needs to include the same field and one of
   the selected subprotocol values in its response for the connection to
   be established.

   These subprotocol names do not need to be registered, but if a
   subprotocol is intended to be implemented by multiple independent
   WebSocket servers, potential clashes with the names of subprotocols
   defined independently can be avoided by using names that contain the
   domain name of the subprotocol's originator.  For example, if Example
   Corporation were to create a Chat subprotocol to be implemented by
   many servers around the Web, they could name it "chat.example.com".
   If the Example Organisation called their competing subprotocol
   "example.org's chat protocol", then the two subprotocols could be
   implemented by servers simultaneously, with the server dynamically
   selecting which subprotocol to use based on the value sent by the
   client.

   Subprotocols can be versioned in backwards-incompatible ways by
   changing the subprotocol name, eg. going from "bookings.example.net"
   to "v2.bookings.example.net".  These subprotocols would be considered
   completely separate by WebSocket clients.  Backwards-compatible
   versioning can be implemented by reusing the same subprotocol string
   but carefully designing the actual subprotocol to support this kind
   of extensibility.





















Fette                    Expires April 20, 2011                [Page 14]


Internet-Draft           The WebSocket protocol             October 2010


2.  Conformance requirements

   All diagrams, examples, and notes in this specification are non-
   normative, as are all sections explicitly marked non-normative.
   Everything else in this specification is normative.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHOULD", "SHOULD NOT",
   "RECOMMENDED", "MAY", and "OPTIONAL" in the normative parts of this
   document are to be interpreted as described in RFC2119.  For
   readability, these words do not appear in all uppercase letters in
   this specification.  [RFC2119]

   Requirements phrased in the imperative as part of algorithms (such as
   "strip any leading space characters" or "return false and abort these
   steps") are to be interpreted with the meaning of the key word
   ("must", "should", "may", etc) used in introducing the algorithm.

   Conformance requirements phrased as algorithms or specific steps may
   be implemented in any manner, so long as the end result is
   equivalent.  (In particular, the algorithms defined in this
   specification are intended to be easy to follow, and not intended to
   be performant.)

   Implementations may impose implementation-specific limits on
   otherwise unconstrained inputs, e.g. to prevent denial of service
   attacks, to guard against running out of memory, or to work around
   platform-specific limitations.

   The conformance classes defined by this specification are user agents
   and servers.

2.1.  Terminology

   *ASCII* shall mean the character-encoding scheme defined in
   [ANSI.X3-4.1986].

   *Converting a string to ASCII lowercase* means replacing all
   characters in the range U+0041 to U+005A (i.e.  LATIN CAPITAL LETTER
   A to LATIN CAPITAL LETTER Z) with the corresponding characters in the
   range U+0061 to U+007A (i.e.  LATIN SMALL LETTER A to LATIN SMALL
   LETTER Z).

   Comparing two strings in an *ASCII case-insensitive* manner means
   comparing them exactly, code point for code point, except that the
   characters in the range U+0041 to U+005A (i.e.  LATIN CAPITAL LETTER
   A to LATIN CAPITAL LETTER Z) and the corresponding characters in the
   range U+0061 to U+007A (i.e.  LATIN SMALL LETTER A to LATIN SMALL
   LETTER Z) are considered to also match.



Fette                    Expires April 20, 2011                [Page 15]


Internet-Draft           The WebSocket protocol             October 2010


   The term "URL" is used in this section in a manner consistent with
   the terminology used in HTML, namely, to denote a string that might
   or might not be a valid URI or IRI and to which certain error
   handling behaviors will be applied when the string is parsed.  [HTML]

   When an implementation is required to _send_ data as part of the
   WebSocket protocol, the implementation may delay the actual
   transmission arbitrarily, e.g. buffering data so as to send fewer IP
   packets.










































Fette                    Expires April 20, 2011                [Page 16]


Internet-Draft           The WebSocket protocol             October 2010


3.  WebSocket URLs

3.1.  Parsing WebSocket URLs

   The steps to *parse a WebSocket URL's components* from a string /url/
   are as follows.  These steps return either a /host/, a /port/, a
   /resource name/, and a /secure/ flag, or they fail.

   1.   If the /url/ string is not an absolute URL, then fail this
        algorithm.  [RFC3986] [RFC3987]

   2.   Resolve the /url/ string using the resolve a Web address
        algorithm defined by the Web addresses specification, with the
        URL character encoding set to UTF-8.  [RFC3629] [RFC3986]
        [RFC3987]

        NOTE: It doesn't matter what it is resolved relative to, since
        we already know it is an absolute URL at this point.

   3.   If /url/ does not have a <scheme> component whose value, when
        converted to ASCII lowercase, is either "ws" or "wss", then fail
        this algorithm.

   4.   If /url/ has a <fragment> component, then fail this algorithm.

   5.   If the <scheme> component of /url/ is "ws", set /secure/ to
        false; otherwise, the <scheme> component is "wss", set /secure/
        to true.

   6.   Let /host/ be the value of the <host> component of /url/,
        converted to ASCII lowercase.

   7.   If /url/ has a <port> component, then let /port/ be that
        component's value; otherwise, there is no explicit /port/.

   8.   If there is no explicit /port/, then: if /secure/ is false, let
        /port/ be 80, otherwise let /port/ be 443.

   9.   Let /resource name/ be the value of the <path> component (which
        might be empty) of /url/.

   10.  If /resource name/ is the empty string, set it to a single
        character U+002F SOLIDUS (/).

   11.  If /url/ has a <query> component, then append a single U+003F
        QUESTION MARK character (?) to /resource name/, followed by the
        value of the <query> component.




Fette                    Expires April 20, 2011                [Page 17]


Internet-Draft           The WebSocket protocol             October 2010


   12.  Return /host/, /port/, /resource name/, and /secure/.

3.2.  Constructing WebSocket URLs

   The steps to *construct a WebSocket URL* from a /host/, a /port/, a
   /resource name/, and a /secure/ flag, are as follows:

   1.  Let /url/ be the empty string.

   2.  If the /secure/ flag is false, then append the string "ws://" to
       /url/.  Otherwise, append the string "wss://" to /url/.

   3.  Append /host/ to /url/.

   4.  If the /secure/ flag is false and port is not 80, or if the
       /secure/ flag is true and port is not 443, then append the string
       ":" followed by /port/ to /url/.

   5.  Append /resource name/ to /url/.

   6.  Return /url/.

3.3.  Valid WebSocket URLs

   For a WebSocket URL to be considered valid, the following conditions
   MUST hold.

   o  The /host/ must be ASCII-only (i.e. it must have been punycode-
      encoded already if necessary, and MUST NOT contain any characters
      above U+007E).

   o  The /origin/ must not contain characters in the range U+0041 to
      U+005A (i.e.  LATIN CAPITAL LETTER A to LATIN CAPITAL LETTER Z).

   o  The /resource name/ string must be a non-empty string of
      characters in the range U+0021 to U+007E that starts with a U+002F
      SOLIDUS character (/).

   o  The various strings in /protocols/ MUST all be non-empty strings
      with characters in the range U+0021 to U+007E and MUST all be
      unique.

   Any WebSocket URLs not meeting the above criteria are considered
   invalid, and a client MUST NOT attempt to make a connection to an
   invalid WebSocket URL.  A client SHOULD attempt to parse a URL
   obtained from any external source (such as a web site or a user)
   using the steps specified in Section 3.1 to obtain a valid WebSocket
   URL, but MUST NOT attempt to connect with such an unparsed URL, and



Fette                    Expires April 20, 2011                [Page 18]


Internet-Draft           The WebSocket protocol             October 2010


   instead only use the parsed version and only if that version is
   considered valid by the criteria above.

















































Fette                    Expires April 20, 2011                [Page 19]


Internet-Draft           The WebSocket protocol             October 2010


4.  Data Framing

4.1.  Overview

   The base framing protocol defines a frame type with an opcode, a
   payload length, and designated locations for extension and
   application data, which together define the _payload_ data.  Certain
   bits and opcodes are reserved for future expansion of the protocol.
   As such, In the absence of extensions negotiated during the opening
   handshake (Section 5), all reserved bits MUST be 0 and reserved
   opcode values MUST NOT be used.

   A data frame MAY be transmitted by either the client or the server at
   any time after handshake completion and before that host has
   generated a close message (Section 4.4.1).

4.2.  Base Framing Protocol

   This wire format for the data transfer part is described by the ABNF
   given in detail in this section.  A high level overview of the
   framing is given in the following figure.  [RFC5234]


      0                   1                   2                   3
      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
     +-+-+-+-+-------+-+-------------+-------------------------------+
     |M|R|R|R| opcode|R| Payload len |    Extended payload length    |
     |O|S|S|S|  (4)  |S|     (7)     |             (16/63)           |
     |R|V|V|V|       |V|             |   (if payload len==126/127)   |
     |E|1|2|3|       |4|             |                               |
     +-+-+-+-+-------+-+-------------+ - - - - - - - - - - - - - - - +
     |     Extended payload length continued, if payload len == 127  |
     + - - - - - - - - - - - - - - - +-------------------------------+
     |                               |         Extension data        |
     +-------------------------------+ - - - - - - - - - - - - - - - +
     :                                                               :
     +---------------------------------------------------------------+
     :                       Application data                        :
     +---------------------------------------------------------------+

   MORE:  1 bit

      Indicates more fragments follow in the current message

   RSV1, RSV2, RSV3, RSV4:  1 bit each

      Must be 0 unless an extension is negotiated which defines meanings
      for non-zero values



Fette                    Expires April 20, 2011                [Page 20]


Internet-Draft           The WebSocket protocol             October 2010


   Opcode:  4 bits

      Defines the interpretation of the payload data

   Payload length:  7 bits

      The length of the payload: if 0-125, that is the payload length.
      If 126, the following 2 bytes interpreted as a 16 bit unsigned
      integer are the payload length.  If 127, the following 8 bytes
      interpreted as a 64-bit unsigned integer (the high bit must be 0)
      are the payload length.  Multibyte length quantities are expressed
      in network byte order.  The payload length is the length of the
      Extension data + the length of the Application Data.  The length
      of the Extension data may be zero, in which case the Payload
      length is the length of the Application data.

   Extension data:  n bytes

      The extension data is 0 bytes unless there is a reserved op-code
      or reserved bit present in the frame which indicates an extension
      has been negotiated.  Any extension MUST specify the length of the
      extension data, or how that length may be calculated, and its use
      MUST be negotiated during the handshake.  If present, the
      extension data is included in the total payload length.

   Application data:  n bytes

      Arbitrary application data, taking up the remainder of the frame
      after any extension data.  The length of the Application data is
      equal to the payload length minus the length of the Extension
      data.

   The base framing protocol is formally defined by the following ABNF
   [RFC5234]:

















Fette                    Expires April 20, 2011                [Page 21]


Internet-Draft           The WebSocket protocol             October 2010


      ws-frame               = frame-more
                               frame-rsv1
                               frame-rsv2
                               frame-rsv3
                               frame-opcode
                               frame-rsv4
                               frame-length
                               frame-extension
                               application-data;

      frame-more             = %x0 ; final frame of message
                             / %x1 ; more frames of this message follow

      frame-rsv1             = %x0 ; 1 bit, must be 0

      frame-rsv2             = %x0 ; 1 bit, must be 0

      frame-rsv3             = %x0 ; 1 bit, must be 0

      frame-opcode           = %x0 ; continuation frame
                             / %x1 ; connection close
                             / %x2 ; ping
                             / %x3 ; pong
                             / %x4 ; text frame
                             / %x5 ; binary frame
                             / %x6-F ; reserved

      frame-rsv4             = %x0 ; 1 bit, must be 0

      frame-length           = %x00-7D
                             / %x7E frame-length-16
                             / %x7F frame-length-63

      frame-length-16        = %x0000-FFFF

      frame-length-63        = %x0000000000000000-7FFFFFFFFFFFFFFF

      frame-extension        = *( %x00-FF ) ; to be defined later

      application-data       = *( %x00-FF )

4.3.  Fragmentation

   The following rules apply to fragmentation:

   o  An unfragmented message consists of a single frame with the MORE
      bit clear and an opcode other than 0.




Fette                    Expires April 20, 2011                [Page 22]


Internet-Draft           The WebSocket protocol             October 2010


   o  A fragmented message consists of a single frame with the MORE bit
      set and an opcode other than 0, followed by zero or more frames
      with the MORE bit set and the opcode set to 0, and terminated by a
      single frame with the MORE bit clear and an opcode of 0.  Its
      content is the concatenation of the application data from each of
      those frames in order.

   o  _Note: There is an open question as to whether control frames be
      interjected in the middle of a fragmented message.  If so, it must
      be decided whether they be fragmented (which would require keeping
      a stack of "in-progress" messages)._

   o  A sender MAY create fragments of any size for non control
      messages.

   o  Clients and servers MUST support receiving both fragmented and
      unfragmented messages.

   o  An intermediary MAY change the fragmentation of a message if the
      message uses only opcode and reserved bit values known to the
      intermediary.

4.4.  Control Frames

   Control frames have opcodes of 0x01 (Close), 0x02 (Ping), or 0x03
   (Pong).  Control frames are used to communicate state about the
   websocket.

   All control frames MUST be 125 bytes or less in length and MUST NOT
   be fragmented.

4.4.1.  Close

   The Close message contains an opcode of 0x01.

   The application MUST NOT send any more data messages after sending a
   close message.

   A recevied close message is deemed to be an acknowledgement if the
   message body matches the body of a close message previously sent by
   the receiver.  Otherwise the close message is a close initiated by
   the sender.

   Upon receipt of an initiated close the endpoint MUST send a close
   acknowledgment.  It should do so as soon as is practical.

   The websocket is considered fully closed when an endpoint has either
   received a close acknowledgment or sent a close acknowledgment.



Fette                    Expires April 20, 2011                [Page 23]


Internet-Draft           The WebSocket protocol             October 2010


4.4.2.  Ping

   The Ping message contains an opcode of 0x02.

   Upon receipt of a Ping message, an endpoint MUST send a Pong message
   in response.  It SHOULD do so as soon as is practical.  The message
   bodies of the Ping and Pong MUST be the same.

4.4.3.  Pong

   The Pong message contains an opcode of 0x03.

   Upon receipt of a Ping message, an endpoint MUST send a Pong message
   in response.  It SHOULD do so as soon as is practical.  The message
   bodies of the Ping and Pong MUST be the same.

4.5.  Data Frames

   All frame types not listed in Section 4.4 are data frames, which
   transport application-layer data.  The opcode determines the
   interpretation of the application data:

   Text

      The payload data is text data encoded as UTF-8.

   Binary

      The payload data is arbitrary binary data whose interpretation is
      solely up to the application layer.

4.6.  Examples

   _This section is non-normative._

   o  A single-frame text message

      *  0x04 0x05 "Hello"

   o  A fragmented text message

      *  0x84 0x03 "Hel"

      *  0x00 0x02 "lo"

   o  Ping request and response





Fette                    Expires April 20, 2011                [Page 24]


Internet-Draft           The WebSocket protocol             October 2010


      *  0x02 0x05 "Hello"

      *  0x03 0x05 "Hello"

   o  256 bytes binary message in a single frame

      *  0x05 0x7E 0x0100 [256 bytes of binary data]

   o  64KiB binary message in a single frame

      *  0x05 0x7F 0x0000000000010000 [65536 bytes of binary data]

4.7.  Extensibility

   The protocol is designed to allow for extensions, which will add
   capabilities to the base protocols.  The endpoints of a connection
   MUST negotiate the use of any extensions during the handshake.  This
   specification provides opcodes 0x6 through 0xF, the extension data
   field, and the frame-rsv1, frame-rsv2, frame-rsv3, and frame-rsv4
   bits of the frame header for use by extensions.  Below are some
   anticipated uses of extensions.  This list is neither complete nor
   proscriptive.

   o  Extension data may be placed in the payload before the application
      data.

   o  Reserved bits can be allocated for per-frame needs.

   o  Reserved opcode values can be defined.

   o  Reserved bits can be allocated to the opcode field if more opcode
      values are needed.

   o  A reserved bit or an "extension" opcode can be defined which
      allocates additional bits out of the payload area to define larger
      opcodes or more per-frame bits.















Fette                    Expires April 20, 2011                [Page 25]


Internet-Draft           The WebSocket protocol             October 2010


5.  Opening Handshake

5.1.  Client Requirements

   User agents running in controlled environments, e.g. browsers on
   mobile handsets tied to specific carriers, may offload the management
   of the connection to another agent on the network.  In such a
   situation, the user agent for the purposes of conformance is
   considered to include both the handset software and any such agents.

   When the user agent is to *establish a WebSocket connection* to a
   host /host/, on a port /port/, from an origin whose ASCII
   serialization is /origin/, with a flag /secure/, with a string giving
   a /resource name/, with a (possibly empty) list of strings giving the
   /protocols/, and optionally with a /defer cookies/ flag, it must run
   the following steps.  [ORIGIN]

   1.   Verify that the WebSocket URL and its components are valid
        according to Section 3.3.  If any of the requirements are not
        met, the client MUST fail the WebSocket connection and abort
        these steps.

   2.   If the user agent already has a WebSocket connection to the
        remote host (IP address) identified by /host/, even if known by
        another name, wait until that connection has been established or
        for that connection to have failed.  If multiple connections to
        the same IP address are attempted simultaneously, the user agent
        must serialize them so that there is no more than one connection
        at a time running through the following steps.

        If the user agent cannot determine the IP address of the remote
        host (for example because all communication is being done
        through a proxy server that performs DNS queries itself), then
        the user agent must assume for the purposes of this step that
        each host name refers to a distinct remote host, but should
        instead limit the total number of simultaneous connections that
        are not established to a reasonably low number (e.g., in a Web
        browser, to the number of tabs the user has open).

        NOTE: This makes it harder for a script to perform a denial of
        service attack by just opening a large number of WebSocket
        connections to a remote host.  A server can further reduce the
        load on itself when attacked by making use of this by pausing
        before closing the connection, as that will reduce the rate at
        which the client reconnects.

        NOTE: There is no limit to the number of established WebSocket
        connections a user agent can have with a single remote host.



Fette                    Expires April 20, 2011                [Page 26]


Internet-Draft           The WebSocket protocol             October 2010


        Servers can refuse to connect users with an excessive number of
        connections, or disconnect resource-hogging users when suffering
        high load.

   3.   _Connect_: If the user agent is configured to use a proxy when
        using the WebSocket protocol to connect to host /host/ and/or
        port /port/, then connect to that proxy and ask it to open a TCP
        connection to the host given by /host/ and the port given by
        /port/.

           EXAMPLE: For example, if the user agent uses an HTTP proxy
           for all traffic, then if it was to try to connect to port 80
           on server example.com, it might send the following lines to
           the proxy server:


              CONNECT example.com:80 HTTP/1.1
              Host: example.com

           If there was a password, the connection might look like:


              CONNECT example.com:80 HTTP/1.1
              Host: example.com
              Proxy-authorization: Basic ZWRuYW1vZGU6bm9jYXBlcyE=

        Otherwise, if the user agent is not configured to use a proxy,
        then open a TCP connection to the host given by /host/ and the
        port given by /port/.

        NOTE: Implementations that do not expose explicit UI for
        selecting a proxy for WebSocket connections separate from other
        proxies are encouraged to use a SOCKS proxy for WebSocket
        connections, if available, or failing that, to prefer the proxy
        configured for HTTPS connections over the proxy configured for
        HTTP connections.

        For the purpose of proxy autoconfiguration scripts, the URL to
        pass the function must be constructed from /host/, /port/,
        /resource name/, and the /secure/ flag using the steps to
        construct a WebSocket URL.

        NOTE: The WebSocket protocol can be identified in proxy
        autoconfiguration scripts from the scheme ("ws:" for unencrypted
        connections and "wss:" for encrypted connections).

   4.   If the connection could not be opened, then fail the WebSocket
        connection and abort these steps.



Fette                    Expires April 20, 2011                [Page 27]


Internet-Draft           The WebSocket protocol             October 2010


   5.   If /secure/ is true, perform a TLS handshake over the
        connection.  If this fails (e.g. the server's certificate could
        not be verified), then fail the WebSocket connection and abort
        these steps.  Otherwise, all further communication on this
        channel must run through the encrypted tunnel.  [RFC2246]

        User agents must use the Server Name Indication extension in the
        TLS handshake.  [RFC4366]

   6.   Send the UTF-8 string "GET" followed by a UTF-8-encoded U+0020
        SPACE character to the remote side (the server).

        Send the /resource name/ value, encoded as UTF-8.

        Send another UTF-8-encoded U+0020 SPACE character, followed by
        the UTF-8 string "HTTP/1.1", followed by a UTF-8-encoded U+000D
        CARRIAGE RETURN U+000A LINE FEED character pair (CRLF).

   7.   Let /fields/ be an empty list of strings.

   8.   Add the string "Upgrade: WebSocket" to /fields/.

   9.   Add the string "Connection: Upgrade" to /fields/.

   10.  Let /hostport/ be an empty string.

   11.  Append the /host/ value, converted to ASCII lowercase, to
        /hostport/.

   12.  If /secure/ is false, and /port/ is not 80, or if /secure/ is
        true, and /port/ is not 443, then append a U+003A COLON
        character (:) followed by the value of /port/, expressed as a
        base-ten integer, to /hostport/.

   13.  Add the string consisting of the concatenation of the string
        "Host:", a U+0020 SPACE character, and /hostport/, to /fields/.

   14.  Add the string consisting of the concatenation of the string
        "Origin:", a U+0020 SPACE character, and the /origin/ value, to
        /fields/.

   15.  Add the string "Sec-WebSocket-Draft: 2" to /fields/.

   16.  If there is no /protocols/, then skip this step.

        Otherwise, generate the acceptable protocol string by joining
        each protocol in /protocols/ using a U+0020 SPACE character.
        Add the string consisting of the concatenation of the string



Fette                    Expires April 20, 2011                [Page 28]


Internet-Draft           The WebSocket protocol             October 2010


        "Sec-WebSocket-Protocol:", a U+0020 SPACE character, and the
        acceptable protocol string generated above, to /fields/.

   17.  If the client has any cookies that would be relevant to a
        resource accessed over HTTP, if /secure/ is false, or HTTPS, if
        it is true, on host /host/, port /port/, with /resource name/ as
        the path (and possibly query parameters), then add to /fields/
        any HTTP headers that would be appropriate for that information.
        [RFC2616] [RFC2109] [RFC2965]

        This includes "HttpOnly" cookies (cookies with the http-only-
        flag set to true); the WebSocket protocol is not considered a
        non-HTTP API for the purpose of cookie processing.

   18.  When one or more HTTP headers are to be added to /fields/ for
        this step, each header must be added separately, and each header
        must be added as one entry consisting of the header's name in
        its canonical case, followed by a U+003A COLON character (:) and
        a U+0020 SPACE character, followed by the value with no use of
        continuation lines (e.g. containing no U+000A LINE FEED
        characters.)

   19.  Let /spaces_1/ be a random integer from 1 to 12 inclusive.

        Let /spaces_2/ be a random integer from 1 to 12 inclusive.

        EXAMPLE: For example, 5 and 9.

   20.  Let /max_1/ be the largest integer not greater than
        4,294,967,295 divided by /spaces_1/.

        Let /max_2/ be the largest integer not greater than
        4,294,967,295 divided by /spaces_2/.

        EXAMPLE: Continuing the example, 858,993,459 and 477,218,588.

   21.  Let /number_1/ be a random integer from 0 to /max_1/ inclusive.

        Let /number_2/ be a random integer from 0 to /max_2/ inclusive.

        EXAMPLE: For example, 777,007,543 and 114,997,259.

   22.  Let /product_1/ be the result of multiplying /number_1/ and
        /spaces_1/ together.

        Let /product_2/ be the result of multiplying /number_2/ and
        /spaces_2/ together.




Fette                    Expires April 20, 2011                [Page 29]


Internet-Draft           The WebSocket protocol             October 2010


        EXAMPLE: Continuing the example, 3,885,037,715 and
        1,034,975,331.

   23.  Let /key_1/ be a string consisting of /product_1/, expressed in
        base ten using the numerals in the range U+0030 DIGIT ZERO (0)
        to U+0039 DIGIT NINE (9).

        Let /key_2/ be a string consisting of /product_2/, expressed in
        base ten using the numerals in the range U+0030 DIGIT ZERO (0)
        to U+0039 DIGIT NINE (9).

        EXAMPLE: Continuing the example, "3885037715" and "1034975331".

   24.  Insert between one and twelve random characters from the ranges
        U+0021 to U+002F and U+003A to U+007E into /key_1/ at random
        positions.

        Insert between one and twelve random characters from the ranges
        U+0021 to U+002F and U+003A to U+007E into /key_2/ at random
        positions.

        NOTE: This corresponds to random printable ASCII characters
        other than the digits and the U+0020 SPACE character.

        EXAMPLE: Continuing the example, this could lead to "P388O503D&
        ul7{K%gX(%715" and "1N?|kUT0or3o4I97N5-S3O31".

   25.  Insert /spaces_1/ U+0020 SPACE characters into /key_1/ at random
        positions other than the start or end of the string.

        Insert /spaces_2/ U+0020 SPACE characters into /key_2/ at random
        positions other than the start or end of the string.

        EXAMPLE: Continuing the example, this could lead to "P388 O503D&
        ul7 {K%gX( %7  15" and "1 N ?|k UT0or 3o  4 I97N 5-S3O 31".

   26.  Add the string consisting of the concatenation of the string
        "Sec-WebSocket-Key1:", a U+0020 SPACE character, and the /key_1/
        value, to /fields/.

        Add the string consisting of the concatenation of the string
        "Sec-WebSocket-Key2:", a U+0020 SPACE character, and the /key_2/
        value, to /fields/.

   27.  For each string in /fields/, in a random order: send the string,
        encoded as UTF-8, followed by a UTF-8-encoded U+000D CARRIAGE
        RETURN U+000A LINE FEED character pair (CRLF).  It is important
        that the fields be output in a random order so that servers not



Fette                    Expires April 20, 2011                [Page 30]


Internet-Draft           The WebSocket protocol             October 2010


        depend on the particular order used by any particular client.

   28.  Send a UTF-8-encoded U+000D CARRIAGE RETURN U+000A LINE FEED
        character pair (CRLF).

   29.  Let /key_3/ be a string consisting of eight random bytes (or
        equivalently, a random 64 bit unsigned integer encoded in big-
        endian order).

        EXAMPLE: For example, 0x47 0x30 0x22 0x2D 0x5A 0x3F 0x47 0x58.

   30.  Send /key_3/ to the server.

   31.  Read bytes from the server until either the connection closes,
        or a 0x0A byte is read.  Let /field/ be these bytes, including
        the 0x0A byte.

        If /field/ is not at least seven bytes long, or if the last two
        bytes aren't 0x0D and 0x0A respectively, or if /field/ contains
        any 0x0D bytes other than the penultimate byte, or if /field/
        does not contain at least two 0x20 bytes, then _fail the
        WebSocket connection_ and abort these steps.

        User agents may apply a timeout to this step, failing the
        WebSocket connection if the server does not send back data in a
        suitable time period.

   32.  Let /code/ be the substring of /field/ that starts from the byte
        after the first 0x20 byte, and ends with the byte before the
        second 0x20 byte.

   33.  If /code/, interpreted as UTF-8, is "101", then move to the next
        step.

        If /code/, interpreted as UTF-8, is "407", then either close the
        connection and jump back to step 2, providing appropriate
        authentication information, or fail the WebSocket connection.
        407 is the code used by HTTP meaning "Proxy Authentication
        Required".  User agents that support proxy authentication must
        interpret the response as defined by HTTP (e.g. to find and
        interpret the |Proxy-Authenticate| header).

        Otherwise, fail the WebSocket connection and abort these steps.

   34.  Let /fields/ be a list of name-value pairs, initially empty.

   35.  _Field_: Let /name/ and /value/ be empty byte arrays.




Fette                    Expires April 20, 2011                [Page 31]


Internet-Draft           The WebSocket protocol             October 2010


   36.  Read a byte from the server.

        If the connection closes before this byte is received, then fail
        the WebSocket connection and abort these steps.

        Otherwise, handle the byte as described in the appropriate entry
        below:

        -> If the byte is 0x0D (UTF-8 CR)
           If the /name/ byte array is empty, then jump to the fields
           processing step.  Otherwise, fail the WebSocket connection
           and abort these steps.

        -> If the byte is 0x0A (UTF-8 LF)
           Fail the WebSocket connection and abort these steps.

        -> If the byte is 0x3A (UTF-8 :)
           Move on to the next step.

        -> If the byte is in the range 0x41 to 0x5A (UTF-8 A-Z)
           Append a byte whose value is the byte's value plus 0x20 to
           the /name/ byte array and redo this step for the next byte.

        -> Otherwise
           Append the byte to the /name/ byte array and redo this step
           for the next byte.

        NOTE: This reads a field name, terminated by a colon, converting
        upper-case letters in the range A-Z to lowercase, and aborting
        if a stray CR or LF is found.

   37.  Let /count/ equal 0.

        NOTE: This is used in the next step to skip past a space
        character after the colon, if necessary.

   38.  Read a byte from the server and increment /count/ by 1.

        If the connection closes before this byte is received, then fail
        the WebSocket connection and abort these steps.

        Otherwise, handle the byte as described in the appropriate entry
        below:

        -> If the byte is 0x20 (UTF-8 space) and /count/ equals 1
           Ignore the byte and redo this step for the next byte.





Fette                    Expires April 20, 2011                [Page 32]


Internet-Draft           The WebSocket protocol             October 2010


        -> If the byte is 0x0D (UTF-8 CR)
           Move on to the next step.

        -> If the byte is 0x0A (UTF-8 LF)
           Fail the WebSocket connection and abort these steps.

        -> Otherwise
           Append the byte to the /value/ byte array and redo this step
           for the next byte.

        NOTE: This reads a field value, terminated by a CRLF, skipping
        past a single space after the colon if there is one.

   39.  Read a byte from the server.

        If the connection closes before this byte is received, or if the
        byte is not a 0x0A byte (UTF-8 LF), then fail the WebSocket
        connection and abort these steps.

        NOTE: This skips past the LF byte of the CRLF after the field.

   40.  Append an entry to the /fields/ list that has the name given by
        the string obtained by interpreting the /name/ byte array as a
        UTF-8 byte stream and the value given by the string obtained by
        interpreting the /value/ byte array as a UTF-8 byte stream.

   41.  Return to the "Field" step above.

   42.  _Fields processing_: Read a byte from the server.

        If the connection closes before this byte is received, or if the
        byte is not a 0x0A byte (UTF-8 LF), then fail the WebSocket
        connection and abort these steps.

        NOTE: This skips past the LF byte of the CRLF after the blank
        line after the fields.

   43.  Let the /list of cookies/ be empty.

   44.  If there is not exactly one entry in the /fields/ list whose
        name is "upgrade", or if there is not exactly one entry in the
        /fields/ list whose name is "connection", or if there is not
        exactly one entry in the /fields/ list whose name is "sec-
        websocket-origin", or if there is not exactly one entry in the
        /fields/ list whose name is "sec-websocket-location", or if the
        /protocol/ was specified but there is not exactly one entry in
        the /fields/ list whose name is "sec-websocket-protocol", or if
        there are any entries in the /fields/ list whose names are the



Fette                    Expires April 20, 2011                [Page 33]


Internet-Draft           The WebSocket protocol             October 2010


        empty string, then fail the WebSocket connection and abort these
        steps.  Otherwise, handle each entry in the /fields/ list as
        follows:

        -> If the entry's name is "upgrade"
           If the value, converted to ASCII lowercase, is not exactly
           equal to the string "websocket", then fail the WebSocket
           connection and abort these steps.

        -> If the entry's name is "connection"
           If the value, converted to ASCII lowercase, is not exactly
           equal to the string "upgrade", then fail the WebSocket
           connection and abort these steps.

        -> If the entry's name is "sec-websocket-origin"
           If the value is not exactly equal to /origin/, then fail the
           WebSocket connection and abort these steps.  [ORIGIN]

        -> If the entry's name is "sec-websocket-location"
           If the value is not exactly equal to a string obtained from
           the steps to construct a WebSocket URL from /host/, /port/,
           /resource name/, and the /secure/ flag, then fail the
           WebSocket connection and abort these steps.

        -> If the entry's name is "sec-websocket-protocol"
           If there was a /protocols/ string specified, and the value is
           not exactly equal to one of the items in /protocols/, then
           fail the WebSocket connection and abort these steps.  (If no
           /protocols/ was specified, the field is ignored.)

        -> If the entry's name is "set-cookie" or "set-cookie2" or
        another cookie-related field name
           If the relevant specification is supported by the user agent,
           add the cookie, interpreted as defined by the appropriate
           specification, to the /list of cookies/, with the resource
           being the one with the host /host/, the port /port/, the path
           (and possibly query parameters) /resource name/, and the
           scheme |http| if /secure/ is false and |https| if /secure/ is
           true.  [RFC2109] [RFC2965]

           If the relevant specification is not supported by the user
           agent, then the field must be ignored.

           The cookies added to the /list of cookies/ are discarded if
           the connection fails to be established.  Only if and when the
           connection is established do the cookies actually get
           applied.




Fette                    Expires April 20, 2011                [Page 34]


Internet-Draft           The WebSocket protocol             October 2010


        -> Any other name
           Ignore it.


   45.  Let /challenge/ be the concatenation of /number_1/, expressed as
        a big-endian 32 bit integer, /number_2/, expressed as a big-
        endian 32 bit integer, and the eight bytes of /key_3/ in the
        order they were sent on the wire.

        EXAMPLE: Using the examples given earlier, this leads to the 16
        bytes 0x2E 0x50 0x31 0xB7 0x06 0xDA 0xB8 0x0B 0x47 0x30 0x22
        0x2D 0x5A 0x3F 0x47 0x58.

   46.  Let /expected/ be the MD5 fingerprint of /challenge/ as a big-
        endian 128 bit string.  [RFC1321]

        EXAMPLE: Using the examples given earlier, this leads to the 16
        bytes 0x30 0x73 0x74 0x33 0x52 0x6C 0x26 0x71 0x2D 0x32 0x5A
        0x55 0x5E 0x77 0x65 0x75.  In UTF-8, these bytes correspond to
        the string "0st3Rl&q-2ZU^weu".

   47.  Read sixteen bytes from the server.  Let /reply/ be those bytes.

        If the connection closes before these bytes are received, then
        fail the WebSocket connection and abort these steps.

   48.  If /reply/ does not exactly equal /expected/, then fail the
        WebSocket connection and abort these steps.

   49.  If the /defer cookies/ flag is not set, apply the cookies in the
        /list of cookies/.

   50.  The *WebSocket connection is established*.  Now the user agent
        must send and receive to and from the connection as described in
        the next section.

   51.  If the /defer cookies/ flag is set, store the /list of cookies/
        for use by the component that invoked this algorithm.

   Where the algorithm above requires that a user agent fail the
   WebSocket connection, the user agent may first read an arbitrary
   number of further bytes from the connection (and then discard them)
   before actually *failing the WebSocket connection*.  Similarly, if a
   user agent can show that the bytes read from the connection so far
   are such that there is no subsequent sequence of bytes that the
   server can send that would not result in the user agent being
   required to *fail the WebSocket connection*, the user agent may
   immediately *fail the WebSocket connection* without waiting for those



Fette                    Expires April 20, 2011                [Page 35]


Internet-Draft           The WebSocket protocol             October 2010


   bytes.

   NOTE: The previous paragraph is intended to make it conforming for
   user agents to implement the algorithm in subtlely different ways
   that are equivalent in all ways except that they terminate the
   connection at earlier or later points.  For example, it enables an
   implementation to buffer the entire handshake response before
   checking it, or to verify each field as it is received rather than
   collecting all the fields and then checking them as a block.

   When the user agent is to "apply the cookies" in a /list of cookies/,
   it must handle each cookie in the /list of cookies/ as defined by the
   appropriate specification.  [RFC2109] [RFC2965]

5.2.  Server-side requirements

   _This section only applies to servers._

   Servers may offload the management of the connection to other agents
   on the network, for example load balancers and reverse proxies.  In
   such a situation, the server for the purposes of conformance is
   considered to include all parts of the server-side infrastructure
   from the first device to terminate the TCP connection all the way to
   the server that processes requests and sends responses.

   EXAMPLE: For example, a data center might have a server that responds
   to Web Socket requests with an appropriate handshake, and then passes
   the connection to another server to actually process the data frames.
   For the purposes of this specification, the "server" is the
   combination of both computers.

5.2.1.  Reading the client's opening handshake

   When a client starts a WebSocket connection, it sends its part of the
   opening handshake.  The server must parse at least part of this
   handshake in order to obtain the necessary information to generate
   the server part of the handshake.

   The client handshake consists of the following parts.  If the server,
   while reading the handshake, finds that the client did not send a
   handshake that matches the description below, the server should abort
   the WebSocket connection.

   1.  The three-character UTF-8 string "GET".

   2.  A UTF-8-encoded U+0020 SPACE character (0x20 byte).





Fette                    Expires April 20, 2011                [Page 36]


Internet-Draft           The WebSocket protocol             October 2010


   3.  A string consisting of all the bytes up to the next UTF-8-encoded
       U+0020 SPACE character (0x20 byte).  The result of decoding this
       string as a UTF-8 string is the name of the resource requested by
       the server.  If the server only supports one resource, then this
       can safely be ignored; the client verifies that the right
       resource is supported based on the information included in the
       server's own handshake.  The resource name will begin with U+002F
       SOLIDUS character (/) and will only include characters in the
       range U+0021 to U+007E.

   4.  A string of bytes terminated by a UTF-8-encoded U+000D CARRIAGE
       RETURN U+000A LINE FEED character pair (CRLF).  All the
       characters from the second 0x20 byte up to the first 0x0D 0x0A
       byte pair in the data from the client can be safely ignored.  (It
       will probably be the string "HTTP/1.1".)

   5.  A series of fields.

       Each field is terminated by a UTF-8-encoded U+000D CARRIAGE
       RETURN U+000A LINE FEED character pair (CRLF).  The end of the
       fields is denoted by the terminating CRLF pair being followed
       immediately by another CRLF pair.

       NOTE: In other words, the fields start with the first 0x0D 0x0A
       byte pair, end with the first 0x0D 0x0A 0x0D 0x0A byte sequence,
       and are separate from each other by 0x0D 0x0A byte pairs.

       The fields are encoded as UTF-8.

       Each field consists of a name, consisting of one or more
       characters in the ranges U+0021 to U+0039 and U+003B to U+007E,
       followed by a U+003A COLON character (:) and a U+0020 SPACE
       character, followed by zero or more characters forming the value.

       The expected field names, the meaning of their corresponding
       values, and the processing servers are required to apply to those
       fields, are described below, after the description of the client
       handshake.

   6.  After the first 0x0D 0x0A 0x0D 0x0A byte sequence, indicating the
       end of the fields, the client sends eight random bytes.  These
       are used in constructing the server handshake.

   The expected field names, and the meaning of their corresponding
   values, are as follows.  Field names must be compared in an ASCII
   case-insensitive manner.





Fette                    Expires April 20, 2011                [Page 37]


Internet-Draft           The WebSocket protocol             October 2010


   |Upgrade|
      Invariant part of the handshake.  Will always have a value that is
      an ASCII case-insensitive match for the string "WebSocket".

      Can be safely ignored, though the server should abort the
      WebSocket connection if this field is absent or has a different
      value, to avoid vulnerability to cross-protocol attacks.

   |Connection|
      Invariant part of the handshake.  Will always have a value that is
      an ASCII case-insensitive match for the string "Upgrade".

      Can be safely ignored, though the server should abort the
      WebSocket connection if this field is absent or has a different
      value, to avoid vulnerability to cross-protocol attacks.

   |Host|
      The value gives the hostname that the client intended to use when
      opening the WebSocket.  It would be of interest in particular to
      virtual hosting environments, where one server might serve
      multiple hosts, and might therefore want to return different data.

      Can be safely ignored, though the server should abort the
      WebSocket connection if this field is absent or has a value that
      does not match the server's host name, to avoid vulnerability to
      cross-protocol attacks and DNS rebinding attacks.

   |Origin|
      The value gives the scheme, hostname, and port (if it's not the
      default port for the given scheme) of the page that asked the
      client to open the WebSocket.  It would be interesting if the
      server's operator had deals with operators of other sites, since
      the server could then decide how to respond (or indeed, _whether_
      to respond) based on which site was requesting a connection.
      [ORIGIN]

      Can be safely ignored, though the server should abort the
      WebSocket connection if this field is absent or has a value that
      does not match one of the origins the server is expecting to
      communicate with, to avoid vulnerability to cross-protocol attacks
      and cross-site scripting attacks.

   |Sec-WebSocket-Protocol|
      The value gives the name of a subprotocol that the client is
      intending to select.  It would be interesting if the server
      supports multiple protocols or protocol versions.

      Can be safely ignored, though the server may abort the WebSocket



Fette                    Expires April 20, 2011                [Page 38]


Internet-Draft           The WebSocket protocol             October 2010


      connection if the field is absent but the conventions for
      communicating with the server are such that the field is expected;
      and the server should abort the WebSocket connection if the field
      has a value that does not match one of the subprotocols that the
      server supports, to avoid integrity errors once the connection is
      established.

   |Sec-WebSocket-Key1|

   |Sec-WebSocket-Key2|
      The values provide the information required for computing the
      server's handshake, as described in the next section.

   |Sec-WebSocket-Draft|
      The value provides the version of this draft protocol that the
      client is attempting to establish a connection using.  If this
      value is not equal to a version of the draft protocol that the
      server understands, the server MUST abort the WebSocket
      connection.

   Other fields
      Other fields can be used, such as "Cookie", for authentication
      purposes.  Their semantics are equivalent to the semantics of the
      HTTP headers with the same names.

   Unrecognized fields can be safely ignored, and are probably either
   the result of intermediaries injecting fields unrelated to the
   operation of the WebSocket protocol, or clients that support future
   versions of the protocol offering options that the server doesn't
   support.

5.2.2.  Sending the server's opening handshake

   When a client establishes a WebSocket connection to a server, the
   server must run the following steps.

   1.   If the server supports encryption, perform a TLS handshake over
        the connection.  If this fails (e.g. the client indicated a host
        name in the extended client hello "server_name" extension that
        the server does not host), then close the connection; otherwise,
        all further communication for the connection (including the
        server handshake) must run through the encrypted tunnel.
        [RFC2246]

   2.   Establish the following information:






Fette                    Expires April 20, 2011                [Page 39]


Internet-Draft           The WebSocket protocol             October 2010


        /host/
           The host name or IP address of the WebSocket server, as it is
           to be addressed by clients.  The host name must be punycode-
           encoded if necessary.  If the server can respond to requests
           to multiple hosts (e.g. in a virtual hosting environment),
           then the value should be derived from the client's handshake,
           specifically from the "Host" field.  The /host/ value must be
           lowercase (not containing characters in the range U+0041
           LATIN CAPITAL LETTER A to U+005A LATIN CAPITAL LETTER Z).

        /port/
           The port number on which the server expected and/or received
           the connection.

        /resource name/
           An identifier for the service provided by the server.  If the
           server provides multiple services, then the value should be
           derived from the resource name given in the client's
           handshake.

        /secure flag/


           True if the connection is encrypted or if the server expected
           it to be encrypted; false otherwise.

        /origin/
           The ASCII serialization of the origin that the server is
           willing to communicate with, converted to ASCII lowercase.
           If the server can respond to requests from multiple origins
           (or indeed, all origins), then the value should be derived
           from the client's handshake, specifically from the "Origin"
           field.  [ORIGIN]

        /subprotocol/
           Either null, or a string representing the subprotocol the
           server is ready to use.  If the server supports multiple
           subprotocols, then the value should be derived from the
           client's handshake, specifically by selecting one of the
           values from the "Sec-WebSocket-Protocol" field.  The absence
           of such a field is equivalent to the null value.  The empty
           string is not the same as the null value for these purposes.

        /key_1/
           The value of the "Sec-WebSocket-Key1" field in the client's
           handshake.





Fette                    Expires April 20, 2011                [Page 40]


Internet-Draft           The WebSocket protocol             October 2010


        /key_2/
           The value of the "Sec-WebSocket-Key2" field in the client's
           handshake.

        /key_3/
           The eight random bytes sent after the first 0x0D 0x0A 0x0D
           0x0A sequence in the client's handshake.

   3.   Let /location/ be the string that results from constructing a
        WebSocket URL from /host/, /port/, /resource name/, and /secure
        flag/.

   4.   Let /key-number_1/ be the digits (characters in the range U+0030
        DIGIT ZERO (0) to U+0039 DIGIT NINE (9)) in /key_1/, interpreted
        as a base ten integer, ignoring all other characters in /key_1/.

        Let /key-number_2/ be the digits (characters in the range U+0030
        DIGIT ZERO (0) to U+0039 DIGIT NINE (9)) in /key_2/, interpreted
        as a base ten integer, ignoring all other characters in /key_2/.

           EXAMPLE: For example, assume that the client handshake was:


              GET / HTTP/1.1
              Connection: Upgrade
              Host: example.com
              Upgrade: WebSocket
              Sec-WebSocket-Key1: 3e6b263  4 17 80
              Origin: http://example.com
              Sec-WebSocket-Key2: 17  9 G`ZD9   2 2b 7X 3 /r90

              WjN}|M(6

           The /key-number_1/ would be the number 3,626,341,780, and the
           /key-number_2/ would be the number 1,799,227,390.

           In this example, incidentally, /key_3/ is "WjN}|M(6", or 0x57
           0x6A 0x4E 0x7D 0x7C 0x4D 0x28 0x36.

   5.   Let /spaces_1/ be the number of U+0020 SPACE characters in
        /key_1/.

        Let /spaces_2/ be the number of U+0020 SPACE characters in
        /key_2/.

        If either /spaces_1/ or /spaces_2/ is zero, then abort the
        WebSocket connection.  This is a symptom of a cross-protocol
        attack.



Fette                    Expires April 20, 2011                [Page 41]


Internet-Draft           The WebSocket protocol             October 2010


        EXAMPLE: In the example above, /spaces_1/ would be 4 and
        /spaces_2/ would be 10.

   6.   If /key-number_1/ is not an integral multiple of /spaces_1/,
        then abort the WebSocket connection.

        If /key-number_2/ is not an integral multiple of /spaces_2/,
        then abort the WebSocket connection.

        NOTE: This can only happen if the client is not a conforming
        WebSocket client.

   7.   Let /part_1/ be /key-number_1/ divided by /spaces_1/.

        Let /part_2/ be /key-number_2/ divided by /spaces_2/.

        EXAMPLE: In the example above, /part_1/ would be 906,585,445 and
        /part_2/ would be 179,922,739.

   8.   Let /challenge/ be the concatenation of /part_1/, expressed as a
        big-endian 32 bit integer, /part_2/, expressed as a big-endian
        32 bit integer, and the eight bytes of /key_3/ in the order they
        were sent on the wire.

        EXAMPLE: In the example above, this would be the 16 bytes 0x36
        0x09 0x65 0x65 0x0A 0xB9 0x67 0x33 0x57 0x6A 0x4E 0x7D 0x7C 0x4D
        0x28 0x36.

   9.   Let /response/ be the MD5 fingerprint of /challenge/ as a big-
        endian 128 bit string.  [RFC1321]

        EXAMPLE: In the example above, this would be the 16 bytes 0x6E
        0x60 0x39 0x65 0x42 0x6B 0x39 0x7A 0x24 0x52 0x38 0x70 0x4F 0x74
        0x56 0x62, or "n`9eBk9z$R8pOtVb" in UTF-8.

   10.  Send the following line, terminated by the two characters U+000D
        CARRIAGE RETURN and U+000A LINE FEED (CRLF) and encoded as
        UTF-8, to the client:

           HTTP/1.1 101 WebSocket Protocol Handshake

        This line may be sent differently if necessary, but must match
        the Status-Line production defined in the HTTP specification,
        with the Status-Code having the value 101.

   11.  Send the following fields to the client.  Each field must be
        sent as a line consisting of the field name, which must be an
        ASCII case-insensitive match for the field name in the list



Fette                    Expires April 20, 2011                [Page 42]


Internet-Draft           The WebSocket protocol             October 2010


        below, followed by a U+003A COLON character (:) and a U+0020
        SPACE character, followed by the field value as specified in the
        list below, followed by the two characters U+000D CARRIAGE
        RETURN and U+000A LINE FEED (CRLF).  The lines must be encoded
        as UTF-8.  The lines may be sent in any order.

        |Upgrade|
           The value must be the string "WebSocket".

        |Connection|
           The value must be the string "Upgrade".

        |Sec-WebSocket-Location|
           The value must be /location/

        |Sec-WebSocket-Origin|
           The value must be /origin/

        |Sec-WebSocket-Protocol|
           This field must be included if /subprotocol/ is not null, and
           must not be included if /subprotocol/ is null.

           If included, the value must be /subprotocol/

        Optionally, include "Set-Cookie", "Set-Cookie2", or other
        cookie-related fields, with values equal to the values that
        would be used for the identically named HTTP headers.  [RFC2109]
        [RFC2965]

   12.  Send two bytes 0x0D 0x0A (UTF-8 CRLF).

   13.  Send /response/.

   This completes the server's handshake.  If the server finishes these
   steps without aborting the WebSocket connection, and if the client
   does not then fail the WebSocket connection, then the connection is
   established and the server may begin sending and receiving data, as
   described in the next section.













Fette                    Expires April 20, 2011                [Page 43]


Internet-Draft           The WebSocket protocol             October 2010


6.  Error Handling

6.1.  Handling errors in UTF-8 from the server

   When a client is to interpret a byte stream as UTF-8 but finds that
   the byte stream is not in fact a valid UTF-8 stream, then any bytes
   or sequences of bytes that are not valid UTF-8 sequences must be
   interpreted as a U+FFFD REPLACEMENT CHARACTER.

6.2.  Handling errors in UTF-8 from the client

   When a server is to interpret a byte stream as UTF-8 but finds that
   the byte stream is not in fact a valid UTF-8 stream, behavior is
   undefined.  A server could close the connection, convert invalid byte
   sequences to U+FFFD REPLACEMENT CHARACTERs, store the data verbatim,
   or perform application-specific processing.  Subprotocols layered on
   the WebSocket protocol might define specific behavior for servers.


































Fette                    Expires April 20, 2011                [Page 44]


Internet-Draft           The WebSocket protocol             October 2010


7.  Closing the connection

7.1.  Client-initiated closure

   Certain algorithms require the user agent to *fail the WebSocket
   connection*.  To do so, the user agent must close the WebSocket
   connection, and may report the problem to the user (which would be
   especially useful for developers).

   Except as indicated above or as specified by the application layer
   (e.g. a script using the WebSocket API), user agents should not close
   the connection.

   User agents must not convey any failure information to scripts in a
   way that would allow a script to distinguish the following
   situations:

   o  A server whose host name could not be resolved.

   o  A server to which packets could not successfully be routed.

   o  A server that refused the connection on the specified port.

   o  A server that did not complete the opening handshake (e.g. because
      it was not a WebSocket server).

   o  A WebSocket server that sent a correct opening handshake, but that
      specified options that caused the client to drop the connection
      (e.g. the server specified an origin that differed from the
      script's).

   o  A WebSocket server that abruptly closed the connection after
      successfully completing the opening handshake.

7.2.  Server-initiated closure

   Certain algorithms require or recommend that the server *abort the
   WebSocket connection* during the opening handshake.  To do so, the
   server must simply close the WebSocket connection.

7.3.  Closure

   To *close the WebSocket connection*, the user agent or server must
   close the TCP connection, using whatever mechanism possible (e.g.
   either the TCP RST or FIN mechanisms).  When a user agent notices
   that the server has closed its connection, it must immediately close
   its side of the connection also.  Whether the user agent or the
   server closes the connection first, it is said that the *WebSocket



Fette                    Expires April 20, 2011                [Page 45]


Internet-Draft           The WebSocket protocol             October 2010


   connection is closed*.  If the connection was closed after the client
   finished the WebSocket closing handshake, then the WebSocket
   connection is said to have been closed _cleanly_.

   Servers may close the WebSocket connection whenever desired.  User
   agents should not close the WebSocket connection arbitrarily.













































Fette                    Expires April 20, 2011                [Page 46]


Internet-Draft           The WebSocket protocol             October 2010


8.  Known extensions

   Extensions provide a mechanism for implementations to opt-in to
   additional protocol features.  This section defines the meaning of
   well-known extensions but implementations may use extensions defined
   separately as well.

8.1.  Compression

   The registered extension token for this compression extension is
   "deflate-stream".

   The extension does not have any per message extension data and it
   does not define the use of any WebSocket reserved bits or op codes.

   Senders using this extension MUST apply RFC 1951 encodings to all
   bytes of the data stream following the handshake including both data
   and control messages.  The data stream MAY include multiple blocks of
   both compressed and uncompressed types as defined by RFC 1951.
   [RFC1951]

   Senders MUST NOT delay the transmission of any portion of a WebSocket
   message because the deflate encoding of the message does not end on a
   byte boundary.  The encodings for adjacent messages MAY appear in the
   same byte if no delay in transmission is occurred by doing so.


























Fette                    Expires April 20, 2011                [Page 47]


Internet-Draft           The WebSocket protocol             October 2010


9.  Security considerations

   While this protocol is intended to be used by scripts in Web pages,
   it can also be used directly by hosts.  Such hosts are acting on
   their own behalf, and can therefore send fake "Origin" fields,
   misleading the server.  Servers should therefore be careful about
   assuming that they are talking directly to scripts from known
   origins, and must consider that they might be accessed in unexpected
   ways.  In particular, a server should not trust that any input is
   valid.

   EXAMPLE: For example, if the server uses input as part of SQL
   queries, all input text should be escaped before being passed to the
   SQL server, lest the server be susceptible to SQL injection.


   Servers that are not intended to process input from any Web page but
   only for certain sites should verify the "Origin" field is an origin
   they expect, and should only respond with the corresponding "Sec-
   WebSocket-Origin" if it is an accepted origin.  Servers that only
   accept input from one origin can just send back that value in the
   "Sec-WebSocket-Origin" field, without bothering to check the client's
   value.


   If at any time a server is faced with data that it does not
   understand, or that violates some criteria by which the server
   determines safety of input, or when the server sees a handshake that
   does not correspond to the values the server is expecting (e.g.
   incorrect path or origin), the server should just disconnect.  It is
   always safe to disconnect.


   The biggest security risk when sending text data using this protocol
   is sending data using the wrong encoding.  If an attacker can trick
   the server into sending data encoded as ISO-8859-1 verbatim (for
   instance), rather than encoded as UTF-8, then the attacker could
   inject arbitrary frames into the data stream.













Fette                    Expires April 20, 2011                [Page 48]


Internet-Draft           The WebSocket protocol             October 2010


10.  IANA considerations

10.1.  Registration of ws: scheme

   A |ws:| URL identifies a WebSocket server and resource name.

   URI scheme name.
      ws

   Status.
      Permanent.

   URI scheme syntax.
      In ABNF terms using the terminals from the URI specifications:
      [RFC5234] [RFC3986]

           "ws" ":" hier-part [ "?" query ]

      The path and query components form the resource name sent to the
      server to identify the kind of service desired.  Other components
      have the meanings described in RFC3986.

   URI scheme semantics.
      The only operation for this scheme is to open a connection using
      the WebSocket protocol.

   Encoding considerations.
      Characters in the host component that are excluded by the syntax
      defined above must be converted from Unicode to ASCII by applying
      the IDNA ToASCII algorithm to the Unicode host name, with both the
      AllowUnassigned and UseSTD3ASCIIRules flags set, and using the
      result of this algorithm as the host in the URI.  [RFC3490]

      Characters in other components that are excluded by the syntax
      defined above must be converted from Unicode to ASCII by first
      encoding the characters as UTF-8 and then replacing the
      corresponding bytes using their percent-encoded form as defined in
      the URI and IRI specification.  [RFC3986] [RFC3987]

   Applications/protocols that use this URI scheme name.
      WebSocket protocol.

   Interoperability considerations.
      None.







Fette                    Expires April 20, 2011                [Page 49]


Internet-Draft           The WebSocket protocol             October 2010


   Security considerations.
      See "Security considerations" section above.

   Contact.
      Ian Hickson <ian@hixie.ch>

   Author/Change controller.
      Ian Hickson <ian@hixie.ch>

   References.
      This document.

10.2.  Registration of wss: scheme

   A |wss:| URL identifies a WebSocket server and resource name, and
   indicates that traffic over that connection is to be encrypted.

   URI scheme name.
      wss

   Status.
      Permanent.

   URI scheme syntax.
      In ABNF terms using the terminals from the URI specifications:
      [RFC5234] [RFC3986]

           "wss" ":" hier-part [ "?" query ]

      The path and query components form the resource name sent to the
      server to identify the kind of service desired.  Other components
      have the meanings described in RFC3986.

   URI scheme semantics.
      The only operation for this scheme is to open a connection using
      the WebSocket protocol, encrypted using TLS.

   Encoding considerations.
      Characters in the host component that are excluded by the syntax
      defined above must be converted from Unicode to ASCII by applying
      the IDNA ToASCII algorithm to the Unicode host name, with both the
      AllowUnassigned and UseSTD3ASCIIRules flags set, and using the
      result of this algorithm as the host in the URI.  [RFC3490]

      Characters in other components that are excluded by the syntax
      defined above must be converted from Unicode to ASCII by first
      encoding the characters as UTF-8 and then replacing the
      corresponding bytes using their percent-encoded form as defined in



Fette                    Expires April 20, 2011                [Page 50]


Internet-Draft           The WebSocket protocol             October 2010


      the URI and IRI specification.  [RFC3986] [RFC3987]

   Applications/protocols that use this URI scheme name.
      WebSocket protocol over TLS.

   Interoperability considerations.
      None.

   Security considerations.
      See "Security considerations" section above.

   Contact.
      Ian Hickson <ian@hixie.ch>

   Author/Change controller.
      Ian Hickson <ian@hixie.ch>

   References.
      This document.

10.3.  Registration of the "WebSocket" HTTP Upgrade keyword

   Name of token.
      WebSocket

   Author/Change controller.
      Ian Hickson <ian@hixie.ch>

   Contact.
      Ian Hickson <ian@hixie.ch>

   References.
      This document.

10.4.  Sec-WebSocket-Key1 and Sec-WebSocket-Key2

   This section describes two header fields for registration in the
   Permanent Message Header Field Registry.  [RFC3864]

   Header field name
      Sec-WebSocket-Key1

   Applicable protocol
      http







Fette                    Expires April 20, 2011                [Page 51]


Internet-Draft           The WebSocket protocol             October 2010


   Status
      reserved; do not use outside WebSocket handshake

   Author/Change controller
      IETF

   Specification document(s)
      This document is the relevant specification.

   Related information
      None.

   Header field name
      Sec-WebSocket-Key2

   Applicable protocol
      http

   Status
      reserved; do not use outside WebSocket handshake

   Author/Change controller
      IETF

   Specification document(s)
      This document is the relevant specification.

   Related information
      None.

   The |Sec-WebSocket-Key1| and |Sec-WebSocket-Key2| headers are used in
   the WebSocket handshake.  They are sent from the client to the server
   to provide part of the information used by the server to prove that
   it received a valid WebSocket handshake.  This helps ensure that the
   server does not accept connections from non-Web-Socket clients (e.g.
   HTTP clients) that are being abused to send data to unsuspecting
   WebSocket servers.

10.5.  Sec-WebSocket-Location

   This section describes a header field for registration in the
   Permanent Message Header Field Registry.  [RFC3864]

   Header field name
      Sec-WebSocket-Location






Fette                    Expires April 20, 2011                [Page 52]


Internet-Draft           The WebSocket protocol             October 2010


   Applicable protocol
      http

   Status
      reserved; do not use outside WebSocket handshake

   Author/Change controller
      IETF

   Specification document(s)
      This document is the relevant specification.

   Related information
      None.

   The |Sec-WebSocket-Location| header is used in the WebSocket
   handshake.  It is sent from the server to the client to confirm the
   URL of the connection.  This enables the client to verify that the
   connection was established to the right server, port, and path,
   instead of relying on the server to verify that the requested host,
   port, and path are correct.

10.6.  Sec-WebSocket-Origin

   This section describes a header field for registration in the
   Permanent Message Header Field Registry.  [RFC3864]

   Header field name
      Sec-WebSocket-Origin

   Applicable protocol
      http

   Status
      reserved; do not use outside WebSocket handshake

   Author/Change controller
      IETF

   Specification document(s)
      This document is the relevant specification.

   Related information
      None.

   The |Sec-WebSocket-Origin| header is used in the WebSocket handshake.
   It is sent from the server to the client to confirm the origin of the
   script that opened the connection.  This enables user agents to



Fette                    Expires April 20, 2011                [Page 53]


Internet-Draft           The WebSocket protocol             October 2010


   verify that the server is willing to serve the script that opened the
   connection.

10.7.  Sec-WebSocket-Protocol

   This section describes a header field for registration in the
   Permanent Message Header Field Registry.  [RFC3864]

   Header field name
      Sec-WebSocket-Protocol

   Applicable protocol
      http

   Status
      reserved; do not use outside WebSocket handshake

   Author/Change controller
      IETF

   Specification document(s)
      This document is the relevant specification.

   Related information
      None.

   The |Sec-WebSocket-Protocol| header is used in the WebSocket
   handshake.  It is sent from the client to the server and back from
   the server to the client to confirm the subprotocol of the
   connection.  This enables scripts to both select a subprotocol and be
   sure that the server agreed to serve that subprotocol.

10.8.  Sec-WebSocket-Draft

   This section describes a header field for registration in the
   Permanent Message Header Field Registry.  [RFC3864]

   Header field name
      Sec-WebSocket-Draft

   Applicable protocol
      http

   Status
      reserved; do not use outside WebSocket handshake






Fette                    Expires April 20, 2011                [Page 54]


Internet-Draft           The WebSocket protocol             October 2010


   Author/Change controller
      IETF

   Specification document(s)
      This document is the relevant specification.

   Related information
      None.

   The |Sec-WebSocket-Draft| header is used in the WebSocket handshake.
   It is sent from the client to the server to indicate the draft
   protocol version of the connection.  This enables servers to
   correctly interpret the handshake and subsequent data being sent from
   the data, and close the connection if the server cannot interpret
   that data in a safe manner.




































Fette                    Expires April 20, 2011                [Page 55]


Internet-Draft           The WebSocket protocol             October 2010


11.  Using the WebSocket protocol from other specifications

   The WebSocket protocol is intended to be used by another
   specification to provide a generic mechanism for dynamic author-
   defined content, e.g. in a specification defining a scripted API.

   Such a specification first needs to "establish a WebSocket
   connection", providing that algorithm with:

   o  The destination, consisting of a /host/ and a /port/.

   o  A /resource name/, which allows for multiple services to be
      identified at one host and port.

   o  A /secure/ flag, which is true if the connection is to be
      encrypted, and false otherwise.

   o  An ASCII serialization of an origin that is being made responsible
      for the connection.  [ORIGIN]

   o  Optionally a string identifying a protocol that is to be layered
      over the WebSocket connection.

   The /host/, /port/, /resource name/, and /secure/ flag are usually
   obtained from a URL using the steps to parse a WebSocket URL's
   components.  These steps fail if the URL does not specify a
   WebSocket.

   If a connection can be established, then it is said that the
   "WebSocket connection is established".

   If at any time the connection is to be closed, then the specification
   needs to use the "close the WebSocket connection" algorithm.

   When the connection is closed, for any reason including failure to
   establish the connection in the first place, it is said that the
   "WebSocket connection is closed".

   While a connection is open, the specification will need to handle the
   cases when "a WebSocket message has been received" with text /data/.

   To send some text /data/ to an open connection, the specification
   needs to "send /data/ using the WebSocket".








Fette                    Expires April 20, 2011                [Page 56]


Internet-Draft           The WebSocket protocol             October 2010


12.  Acknowledgements

   Special thanks are due to Ian Hickson, who was the original author
   and editor of this protocol.  The initial design of this
   specification benefitted from the participation of many people in the
   WHATWG and WHATWG mailing list.  Contributions to that specification
   are not tracked by section, but a list of all who contributed to that
   specification is given in the WHATWG HTML specification.  [HTML]

   Special thanks also to John Tamplin for providing a significant
   amount of text for the Data Framing section of this specification.








































Fette                    Expires April 20, 2011                [Page 57]


Internet-Draft           The WebSocket protocol             October 2010


13.  Normative References

   [HTML]     Hickson, I., "HTML", August 2010,
              <http://whatwg.org/html5>.

   [ORIGIN]   Barth, A., Jackson, C., and I. Hickson, "The HTTP Origin
              Header", draft-abarth-origin (work in progress),
              September 2009,
              <http://tools.ietf.org/html/draft-abarth-origin>.

   [ANSI.X3-4.1986]
              American National Standards Institute, "Coded Character
              Set - 7-bit American Standard Code for Information
              Interchange", ANSI X3.4, 1986.

   [RFC1321]  Rivest, R., "The MD5 Message-Digest Algorithm", RFC 1321,
              April 1992.

   [RFC1951]  Deutsch, P., "DEFLATE Compressed Data Format Specification
              version 1.3", RFC 1951, May 1996.

   [RFC2109]  Kristol, D. and L. Montulli, "HTTP State Management
              Mechanism", RFC 2109, February 1997.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2246]  Dierks, T. and C. Allen, "The TLS Protocol Version 1.0",
              RFC 2246, January 1999.

   [RFC2616]  Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [RFC2965]  Kristol, D. and L. Montulli, "HTTP State Management
              Mechanism", RFC 2965, October 2000.

   [RFC3490]  Faltstrom, P., Hoffman, P., and A. Costello,
              "Internationalizing Domain Names in Applications (IDNA)",
              RFC 3490, March 2003.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, November 2003.

   [RFC3864]  Klyne, G., Nottingham, M., and J. Mogul, "Registration
              Procedures for Message Header Fields", BCP 90, RFC 3864,
              September 2004.




Fette                    Expires April 20, 2011                [Page 58]


Internet-Draft           The WebSocket protocol             October 2010


   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, January 2005.

   [RFC3987]  Duerst, M. and M. Suignard, "Internationalized Resource
              Identifiers (IRIs)", RFC 3987, January 2005.

   [RFC4366]  Blake-Wilson, S., Nystrom, M., Hopwood, D., Mikkelsen, J.,
              and T. Wright, "Transport Layer Security (TLS)
              Extensions", RFC 4366, April 2006.

   [RFC5234]  Crocker, D. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234, January 2008.

   [WSAPI]    Hickson, I., "The Web Sockets API", August 2010,
              <http://dev.w3.org/html5/websockets/>.



































Fette                    Expires April 20, 2011                [Page 59]


Internet-Draft           The WebSocket protocol             October 2010


Author's Address

   Ian Fette
   Google, Inc.

   Email: ifette+ietf@google.com
   URI:   http://www.ianfette.com/












































Fette                    Expires April 20, 2011                [Page 60]