SUIT                                                            B. Moran
Internet-Draft                                             H. Tschofenig
Intended status: Standards Track                             Arm Limited
Expires: September 10, 2020                                  H. Birkholz
                                                          Fraunhofer SIT
                                                             K. Zandberg
                                                                   Inria
                                                          March 09, 2020


A Concise Binary Object Representation (CBOR)-based Serialization Format
    for the Software Updates for Internet of Things (SUIT) Manifest
                      draft-ietf-suit-manifest-04

Abstract

   This specification describes the format of a manifest.  A manifest is
   a bundle of metadata about the firmware for an IoT device, where to
   find the firmware, the devices to which it applies, and cryptographic
   information protecting the manifest.  Firmware updates and trusted
   boot both tend to use sequences of common operations, so the manifest
   encodes those sequences of operations, rather than declaring the
   metadata.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on September 10, 2020.

Copyright Notice

   Copyright (c) 2020 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents



Moran, et al.          Expires September 10, 2020               [Page 1]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   4
   2.  Conventions and Terminology . . . . . . . . . . . . . . . . .   5
   3.  How to use this Document  . . . . . . . . . . . . . . . . . .   6
   4.  Background  . . . . . . . . . . . . . . . . . . . . . . . . .   6
     4.1.  IoT Firmware Update Constraints . . . . . . . . . . . . .   7
     4.2.  Update Workflow Model . . . . . . . . . . . . . . . . . .   7
       4.2.1.  Pre-Authentication Compatibility Checks . . . . . . .   9
     4.3.  SUIT Manifest Goals . . . . . . . . . . . . . . . . . . .   9
     4.4.  SUIT Manifest Design Summary  . . . . . . . . . . . . . .  10
   5.  Interpreter Behavior  . . . . . . . . . . . . . . . . . . . .  11
     5.1.  Interpreter Setup . . . . . . . . . . . . . . . . . . . .  11
     5.2.  Required Checks . . . . . . . . . . . . . . . . . . . . .  12
     5.3.  Interpreter Fundamental Properties  . . . . . . . . . . .  13
     5.4.  Abstract Machine Description  . . . . . . . . . . . . . .  13
       5.4.1.  Parameters  . . . . . . . . . . . . . . . . . . . . .  14
       5.4.2.  Commands  . . . . . . . . . . . . . . . . . . . . . .  15
       5.4.3.  Command Behavior  . . . . . . . . . . . . . . . . . .  16
     5.5.  Serialized Processing Interpreter . . . . . . . . . . . .  17
     5.6.  Parallel Processing Interpreter . . . . . . . . . . . . .  17
     5.7.  Processing Dependencies . . . . . . . . . . . . . . . . .  18
   6.  Creating Manifests  . . . . . . . . . . . . . . . . . . . . .  18
     6.1.  Manifest Source Material  . . . . . . . . . . . . . . . .  19
     6.2.  Required Template: Compatibility Check  . . . . . . . . .  19
     6.3.  Use Case Template: XIP Secure Boot  . . . . . . . . . . .  20
     6.4.  Use Case Template: Firmware Download  . . . . . . . . . .  21
     6.5.  Use Case Template: Load from External Storage . . . . . .  21



Moran, et al.          Expires September 10, 2020               [Page 2]


Internet-Draft             SUIT CBOR Manifest                 March 2020


     6.6.  Use Case Template Load & Decompress from External Storage  21
     6.7.  Use Case Template: Dependency . . . . . . . . . . . . . .  22
   7.  Manifest Structure  . . . . . . . . . . . . . . . . . . . . .  22
     7.1.  Severable Elements  . . . . . . . . . . . . . . . . . . .  24
     7.2.  Envelope  . . . . . . . . . . . . . . . . . . . . . . . .  25
     7.3.  Manifest  . . . . . . . . . . . . . . . . . . . . . . . .  27
     7.4.  SUIT_Dependency . . . . . . . . . . . . . . . . . . . . .  32
     7.5.  SUIT_Component_Reference  . . . . . . . . . . . . . . . .  32
     7.6.  Manifest Parameters . . . . . . . . . . . . . . . . . . .  33
       7.6.1.  SUIT_Parameter_Strict_Order . . . . . . . . . . . . .  35
       7.6.2.  SUIT_Parameter_Soft_Failure . . . . . . . . . . . . .  35
     7.7.  SUIT_Parameter_Encryption_Info  . . . . . . . . . . . . .  35
       7.7.1.  SUIT_Parameter_Compression_Info . . . . . . . . . . .  35
       7.7.2.  SUIT_Parameter_Unpack_Info  . . . . . . . . . . . . .  36
       7.7.3.  SUIT_Parameters CDDL  . . . . . . . . . . . . . . . .  36
     7.8.  SUIT_Command_Sequence . . . . . . . . . . . . . . . . . .  38
     7.9.  SUIT_Condition  . . . . . . . . . . . . . . . . . . . . .  39
       7.9.1.  Identifier Conditions . . . . . . . . . . . . . . . .  40
       7.9.2.  suit-condition-image-match  . . . . . . . . . . . . .  41
       7.9.3.  suit-condition-image-not-match  . . . . . . . . . . .  41
       7.9.4.  suit-condition-use-before . . . . . . . . . . . . . .  41
       7.9.5.  suit-condition-minimum-battery  . . . . . . . . . . .  41
       7.9.6.  suit-condition-update-authorized  . . . . . . . . . .  42
       7.9.7.  suit-condition-version  . . . . . . . . . . . . . . .  42
       7.9.8.  SUIT_Condition_Custom . . . . . . . . . . . . . . . .  43
       7.9.9.  Identifiers . . . . . . . . . . . . . . . . . . . . .  44
       7.9.10. SUIT_Condition CDDL . . . . . . . . . . . . . . . . .  45
     7.10. SUIT_Directive  . . . . . . . . . . . . . . . . . . . . .  45
       7.10.1.  suit-directive-set-component-index . . . . . . . . .  46
       7.10.2.  suit-directive-set-dependency-index  . . . . . . . .  47
       7.10.3.  suit-directive-abort . . . . . . . . . . . . . . . .  47
       7.10.4.  suit-directive-run-sequence  . . . . . . . . . . . .  47
       7.10.5.  suit-directive-try-each  . . . . . . . . . . . . . .  48
       7.10.6.  suit-directive-process-dependency  . . . . . . . . .  48
       7.10.7.  suit-directive-set-parameters  . . . . . . . . . . .  49
       7.10.8.  suit-directive-override-parameters . . . . . . . . .  49
       7.10.9.  suit-directive-fetch . . . . . . . . . . . . . . . .  50
       7.10.10. suit-directive-copy  . . . . . . . . . . . . . . . .  50
       7.10.11. suit-directive-swap  . . . . . . . . . . . . . . . .  51
       7.10.12. suit-directive-run . . . . . . . . . . . . . . . . .  51
       7.10.13. suit-directive-wait  . . . . . . . . . . . . . . . .  52
       7.10.14. SUIT_Directive CDDL  . . . . . . . . . . . . . . . .  53
     7.11. SUIT_Text_Map . . . . . . . . . . . . . . . . . . . . . .  55
   8.  Access Control Lists  . . . . . . . . . . . . . . . . . . . .  55
   9.  SUIT digest container . . . . . . . . . . . . . . . . . . . .  56
   10. Creating Conditional Sequences  . . . . . . . . . . . . . . .  57
   11. Full CDDL . . . . . . . . . . . . . . . . . . . . . . . . . .  59
   12. Examples  . . . . . . . . . . . . . . . . . . . . . . . . . .  67



Moran, et al.          Expires September 10, 2020               [Page 3]


Internet-Draft             SUIT CBOR Manifest                 March 2020


     12.1.  Example 0: Secure Boot . . . . . . . . . . . . . . . . .  68
     12.2.  Example 1: Simultaneous Download and Installation of
            Payload  . . . . . . . . . . . . . . . . . . . . . . . .  69
     12.3.  Example 2: Simultaneous Download, Installation, and
            Secure Boot  . . . . . . . . . . . . . . . . . . . . . .  72
     12.4.  Example 3: Load from External Storage  . . . . . . . . .  74
     12.5.  Example 4: Load and Decompress from External Storage . .  76
     12.6.  Example 5: Compatibility Test, Download, Installation,
            and Secure Boot  . . . . . . . . . . . . . . . . . . . .  79
     12.7.  Example 6: Two Images  . . . . . . . . . . . . . . . . .  81
   13. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  84
   14. Security Considerations . . . . . . . . . . . . . . . . . . .  85
   15. Mailing List Information  . . . . . . . . . . . . . . . . . .  85
   16. Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  85
   17. References  . . . . . . . . . . . . . . . . . . . . . . . . .  86
     17.1.  Normative References . . . . . . . . . . . . . . . . . .  86
     17.2.  Informative References . . . . . . . . . . . . . . . . .  86
     17.3.  URIs . . . . . . . . . . . . . . . . . . . . . . . . . .  87
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  87

1.  Introduction

   A firmware update mechanism is an essential security feature for IoT
   devices to deal with vulnerabilities.  While the transport of
   firmware images to the devices themselves is important there are
   already various techniques available, such as the Lightweight
   Machine-to-Machine (LwM2M) protocol offering device management of IoT
   devices.  Equally important is the inclusion of meta-data about the
   conveyed firmware image (in the form of a manifest) and the use of
   end-to-end security protection to detect modifications and
   (optionally) to make reverse engineering more difficult.  End-to-end
   security allows the author, who builds the firmware image, to be sure
   that no other party (including potential adversaries) can install
   firmware updates on IoT devices without adequate privileges.  This
   authorization process is ensured by the use of dedicated symmetric or
   asymmetric keys installed on the IoT device: for use cases where only
   integrity protection is required it is sufficient to install a trust
   anchor on the IoT device.  For confidentiality protected firmware
   images it is additionally required to install either one or multiple
   symmetric or asymmetric keys on the IoT device.  Starting security
   protection at the author is a risk mitigation technique so firmware
   images and manifests can be stored on untrusted repositories; it also
   reduces the scope of a compromise of any repository or intermediate
   system to be no worse than a denial of service.

   It is assumed that the reader is familiar with the high-level
   firmware update architecture [I-D.ietf-suit-architecture].




Moran, et al.          Expires September 10, 2020               [Page 4]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   Most Update and Trusted Execution operations are composed of the same
   small set of fundamental operations, such as copying a firmware image
   from one place to another, checking that a firmware image is correct,
   verifying that the specified firmware is the correct firmware for the
   device, or unpacking a firmware.  By using these fundamental
   operations in different orders and changing the parameters they use,
   a great many use cases can be supported by the same encoding.  The
   SUIT manifest uses this observation to heavily optimize update
   metadata for consumption by constrained devices.

   While the SUIT manifest is informed by and optimized for firmware
   update use cases, there is nothing in the
   [I-D.ietf-suit-information-model] that restricts its use to only
   firmware use cases.  Software update and delivery of arbitrary data
   can equally be managed by SUIT-based metadata.

2.  Conventions and Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   The following terminology is used throughout this document.

   -  SUIT: Software Update for the Internet of Things, the IETF working
      group for this standard.

   -  Payload: A piece of information to be delivered.  Typically
      Firmware for the purposes of SUIT.

   -  Resource: A piece of information that is used to construct a
      payload.

   -  Manifest: A piece of information that describes one or more
      payloads, one or more resources, and the processors needed to
      transform resources into payloads.

   -  Update: One or more manifests that describe one or more payloads.

   -  Update Authority: The owner of a cryptographic key used to sign
      updates, trusted by Recipients.

   -  Recipient: The system, typically an IoT device, that receives a
      manifest.





Moran, et al.          Expires September 10, 2020               [Page 5]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   -  Condition: A test for a property of the Recipient or its
      components.

   -  Directive: An action for the Recipient to perform.

   -  Command: A Condition or a Directive.

   -  Trusted Execution: A process by which a system ensures that only
      trusted code is executed, for example secure boot.

   -  A/B images: Dividing a device's storage into two or more bootable
      images, at different offsets, such that the active image can write
      to the inactive image(s).

3.  How to use this Document

   This specification covers four aspects of firmware update: the
   background that has informed this specification, the behavior of a
   device consuming a manifest, the process of creating a manifest, and
   the structure of the manifest itself.

   -  Section 4 describes the device constraints, use cases, and design
      principles that informed the structure of the manifest.

   -  Section 5 describes what actions a manifest processor should take.

   -  Section 6 describes the process of creating a manifest.

   -  Section 7 specifies the content of the manifest.

   For information about firmware update in general and the background
   of the suit manifest, see Section 4.  To implement an updatable
   device, see Section 5 and Section 7.  To implement a tool that
   generates updates, see Section 6 and Section 7.

4.  Background

   This section describes the logistical challenges, device constraints,
   use cases, and design principles that informed the structure of the
   manifest.  For the security considerations of the manifest, see
   [I-D.ietf-suit-information-model].

   Distributing firmware updates to diverse devices with diverse trust
   anchors in a coordinated system presents unique challenges.  Devices
   have a broad set of constraints, requiring different metadata to make
   appropriate decisions.  There may be many actors in production IoT
   systems, each of whom has some authority.  Distributing firmware in
   such a multi-party environment presents additional challenges.  Each



Moran, et al.          Expires September 10, 2020               [Page 6]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   party requires a different subset of data.  Some data may not be
   accessible to all parties.  Multiple signatures may be required from
   parties with different authorities.  This topic is covered in more
   depth in [I-D.ietf-suit-architecture].

4.1.  IoT Firmware Update Constraints

   The various constraints on IoT devices create a broad set of use-case
   requirements.  For example, devices with:

   -  limited processing power and storage may require a simple
      representation of metadata.

   -  bandwidth constraints may require firmware compression or partial
      update support.

   -  bootloader complexity constraints may require simple selection
      between two bootable images.

   -  small internal storage may require external storage support.

   -  multiple processors may require coordinated update of all
      applications.

   -  large storage and complex functionality may require parallel
      update of many software components.

   -  mesh networks may require multicast distribution.

   Supporting the requirements introduced by the constraints on IoT
   devices requires the flexibility to represent a diverse set of
   possible metadata, but also requires that the encoding is kept
   simple.

4.2.  Update Workflow Model

   There are several fundamental assumptions that inform the model of
   the firmware update workflow:

   -  Compatibility must be checked before any other operation is
      performed.

   -  All dependency manifests should be present before any payload is
      fetched.

   -  In some applications, payloads must be fetched and validated prior
      to installation.




Moran, et al.          Expires September 10, 2020               [Page 7]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   There are several fundamental assumptions that inform the model of
   the secure boot workflow:

   -  Compatibility must be checked before any other operation is
      performed.

   -  All dependencies and payloads must be validated prior to loading.

   -  All loaded images must be validated prior to execution.

   Based on these assumptions, the manifest is structured to work with a
   pull parser, where each section of the manifest is used in sequence.
   The expected workflow for a device installing an update can be broken
   down into 5 steps:

   1.  Verify the signature of the manifest.

   2.  Verify the applicability of the manifest.

   3.  Resolve dependencies.

   4.  Fetch payload(s).

   5.  Install payload(s).

   When installation is complete, similar information can be used for
   validating and running images in a further 3 steps:

   1.  Verify image(s).

   2.  Load image(s).

   3.  Run image(s).

   If verification and running is implemented in a bootloader, then the
   bootloader MUST also verify the signature of the manifest and the
   applicability of the manifest in order to implement secure boot
   workflows.  The bootloader MAY add its own authentication, e.g. a
   MAC, to the manifest in order to prevent further verifications.

   When multiple manifests are used for an update, each manifest's steps
   occur in a lockstep fashion; all manifests have dependency resolution
   performed before any manifest performs a payload fetch, etc.








Moran, et al.          Expires September 10, 2020               [Page 8]


Internet-Draft             SUIT CBOR Manifest                 March 2020


4.2.1.  Pre-Authentication Compatibility Checks

   The RECOMMENDED process is to verify the signature of the manifest
   prior to parsing/executing any section of the manifest.  This guards
   the parser against arbitrary input by unauthenticated third parties,
   but it costs extra energy when a device receives an incompatible
   manifest.

   If a device:

   1.  expects to receive many incompatible manifests.

   2.  expects to receive few manifests with failing signatures-for
       example if it is behind a gateway that checks signatures.

   3.  has a power budget that makes signature verification undesirable.

   Then, the device MAY choose to parse and execute only the SUIT_Common
   section of the manifest prior to signature verification.  The
   guidelines in Creating Manifests (Section 6) require that the common
   section contain the applicability checks, so this section is
   sufficient for applicability verification.  The manifest parser MUST
   NOT execute any command with side-effects outside the parser (for
   example, Run, Copy, Swap, or Fetch commands) prior to authentication
   and any such command MUST result in an error.

4.3.  SUIT Manifest Goals

   The manifest described in this document is intended to meet several
   goals, as described below.

   -  Meet the requirements defined in
      [I-D.ietf-suit-information-model].

   -  Simple to parse on a constrained node

   -  Simple to process on a constrained node

   -  Compact encoding

   -  Comprehensible by an intermediate system

   -  Expressive enough to enable advanced use cases on advanced nodes

   -  Extensible

   The SUIT manifest can be used for a variety of purposes throughout
   its lifecycle.  The manifest allows:



Moran, et al.          Expires September 10, 2020               [Page 9]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   -  the Firmware Author to reason about releasing a firmware.

   -  the Network Operator to reason about compatibility of a firmware.

   -  the Device Operator to reason about the impact of a firmware.

   -  the Device Operator to manage distribution of firmware to devices.

   -  the Plant Manager to reason about timing and acceptance of
      firmware updates.

   -  the device to reason about the authority & authenticity of a
      firmware prior to installation.

   -  the device to reason about the applicability of a firmware.

   -  the device to reason about the installation of a firmware.

   -  the device to reason about the authenticity & encoding of a
      firmware at boot.

   Each of these uses happens at a different stage of the manifest
   lifecycle, so each has different requirements.

4.4.  SUIT Manifest Design Summary

   In order to provide flexible behavior to constrained devices, while
   still allowing more powerful devices to use their full capabilities,
   the SUIT manifest encodes the required behavior of a Recipient
   device.  Behavior is encoded as a specialized byte code, contained in
   a CBOR list.  This promotes a flat encoding, which simplifies the
   parser.  The information encoded by this byte code closely matches
   the operations that a device will perform, which promotes ease of
   processing.  The core operations used by most update and trusted
   execution operations are represented in the byte code.  The byte code
   can be extended by registering new operations.

   The specialized byte code approach gives benefits equivalent to those
   provided by a scripting language or conventional byte code, with two
   substantial differences.  First, the language is extremely high
   level, consisting of only the operations that a device may perform
   during update and trusted execution of a firmware image.  Second, the
   language specifies linear behavior, without reverse branches.
   Conditional processing is supported, and parallel and out-of-order
   processing may be performed by sufficiently capable devices.

   By structuring the data in this way, the manifest processor becomes a
   very simple engine that uses a pull parser to interpret the manifest.



Moran, et al.          Expires September 10, 2020              [Page 10]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   This pull parser invokes a series of command handlers that evaluate a
   Condition or execute a Directive.  Most data is structured in a
   highly regular pattern, which simplifies the parser.

   The results of this allow a Recipient to implement a very small
   parser for constrained applications.  If needed, such a parser also
   allows the Recipient to perform complex updates with reduced
   overhead.  Conditional execution of commands allows a simple device
   to perform important decisions at validation-time.

   Dependency handling is vastly simplified as well.  Dependencies
   function like subroutines of the language.  When a manifest has a
   dependency, it can invoke that dependency's commands and modify their
   behavior by setting parameters.  Because some parameters come with
   security implications, the dependencies also have a mechanism to
   reject modifications to parameters on a fine-grained level.

   Developing a robust permissions system works in this model too.  The
   Recipient can use a simple ACL that is a table of Identities and
   Component Identifier permissions to ensure that operations on
   components fail unless they are permitted by the ACL.  This table can
   be further refined with individual parameters and commands.

   Capability reporting is similarly simplified.  A Recipient can report
   the Commands, Parameters, Algorithms, and Component Identifiers that
   it supports.  This is sufficiently precise for a manifest author to
   create a manifest that the Recipient can accept.

   The simplicity of design in the Recipient due to all of these
   benefits allows even a highly constrained platform to use advanced
   update capabilities.

5.  Interpreter Behavior

   This section describes the behavior of the manifest interpreter.
   This section focuses primarily on interpreting commands in the
   manifest.  However, there are several other important behaviors of
   the interpreter: encoding version detection , rollback protection,
   and authenticity verification are chief among these (see
   Section 5.1).

5.1.  Interpreter Setup

   Prior to executing any command sequence, the interpreter or its host
   application MUST inspect the manifest version field and fail when it
   encounters an unsupported encoding version.  Next, the interpreter or
   its host application MUST extract the manifest sequence number and
   perform a rollback check using this sequence number.  The exact logic



Moran, et al.          Expires September 10, 2020              [Page 11]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   of rollback protection may vary by application, but it has the
   following properties:

   -  Whenever the interpreter can choose between several manifests, it
      MUST select the latest valid manifest, authentic manifest.

   -  If the latest valid, authentic manifest fails, it MAY select the
      next latest valid, authentic manifest.

   Here, valid means that a manifest has a supported encoding version
   AND it has not been excluded for other reasons.  Reasons for
   excluding typically involve first executing the manifest and MAY
   include:

   -  Test failed (e.g.  Vendor ID/Class ID).

   -  Unsupported command encountered.

   -  Unsupported parameter encountered.

   -  Unsupported component ID encountered.

   -  Payload not available (update interpreter).

   -  Dependency not available (update interpreter).

   -  Application crashed when executed (bootloader interpreter).

   -  Watchdog timeout occurred (bootloader interpreter).

   -  Dependency or Payload verification failed (bootloader
      interpreter).

   These failure reasons MAY be combined with retry mechanisms prior to
   marking a manifest as invalid.

   Following these initial tests, the interpreter clears all parameter
   storage.  This ensures that the interpreter begins without any leaked
   data.

5.2.  Required Checks

   Once a valid, authentic manifest has been selected, the interpreter
   MUST examine the component list and verify that its maximum number of
   components is not exceeded and that each listed component ID is
   supported.





Moran, et al.          Expires September 10, 2020              [Page 12]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   For each listed component, the interpreter MUST provide storage for
   the supported parameters (Section 5.4.1).  If the interpreter does
   not have sufficient temporary storage to process the parameters for
   all components, it MAY process components serially for each command
   sequence.  See Section 5.5 for more details.

   The interpreter SHOULD check that the common section contains at
   least one vendor ID check and at least one class ID check.

   If the manifest contains more than one component, each command
   sequence MUST begin with a Set Current Component command.

   If a dependency is specified, then the interpreter MUST perform the
   following checks:

   1.  At the beginning of each section in the dependent: all previous
       sections of each dependency have been executed.

   2.  At the end of each section in the dependent: The corresponding
       section in each dependency has been executed.

   If the interpreter does not support dependencies and a manifest
   specifies a dependency, then the interpreter MUST reject the
   manifest.

5.3.  Interpreter Fundamental Properties

   The interpreter has a small set of design goals:

   1.  Executing an update MUST either result in an error, or a
       verifiably correct system state.

   2.  Executing a secure boot MUST either result in an error, or a
       booted system.

   3.  Executing the same manifest on multiple devices MUST result in
       the same system state.

   NOTE: when using A/B images, the manifest functions as two (or more)
   logical manifests, each of which applies to a system in a particular
   starting state.  With that provision, design goal 3 holds.

5.4.  Abstract Machine Description

   The byte code that forms the bulk of the manifest is processed by an
   interpreter.  This interpreter can be modeled as a simple abstract
   machine.  This machine consists of several data storage locations




Moran, et al.          Expires September 10, 2020              [Page 13]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   that are modified by commands.  Certain commands also affect the
   machine's behavior.

   Every command that modifies system state targets a specific
   component.  Components are units of code or data that can be targeted
   by an update.  They are identified by Component identifiers, arrays
   of binary-strings-effectively a binary path.  Each component has a
   corresponding set of configuration, Parameters.  Parameters are used
   as the inputs to commands.

5.4.1.  Parameters

   Some parameters are REQUIRED to implement.  These parameters allow a
   device to perform core functions.

   -  Vendor ID.

   -  Class ID.

   -  Image Digest.

   Some parameters are RECOMMENDED to implement.  These parameters are
   needed for most use-cases.

   -  Image Size.

   -  URI.

   Other parameters are OPTIONAL to implement.  These parameters allow a
   device to implement specific use-cases.

   -  Strict Order.

   -  Soft Failure.

   -  Device ID.

   -  Encryption Info.

   -  Unpack Info.

   -  Source Component.

   -  URI List.

   -  Custom Parameters.





Moran, et al.          Expires September 10, 2020              [Page 14]


Internet-Draft             SUIT CBOR Manifest                 March 2020


5.4.2.  Commands

   Commands define the behavior of a device.  The commands are divided
   into two groups: those that modify state (directives) and those that
   perform tests (conditions).  There are also several Control Flow
   operations.

   Some commands are REQUIRED to implement.  These commands allow a
   device to perform core functions

   -  Check Vendor Identifier (cvid).

   -  Check Class Identifier (ccid).

   -  Verify Image (cimg).

   -  Set Current Component (setc).

   -  Override Parameters (ovrp).

   NOTE: on systems that support only a single component, Set Current
   Component has no effect.

   Some commands are RECOMMENDED to implement.  These commands are
   needed for most use-cases

   -  Set Current Dependency (setd).

   -  Set Parameters (setp).

   -  Process Dependency (pdep).

   -  Run (run).

   -  Fetch (getc).

   Other commands are OPTIONAL to implement.  These commands allow a
   device to implement specific use-cases.

   -  Use Before (ubf).

   -  Check Component Offset (cco).

   -  Check Device Identifier (cdid).

   -  Check Image Not Match (nimg).

   -  Check Minimum Battery (minb).



Moran, et al.          Expires September 10, 2020              [Page 15]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   -  Check Update Authorized (auth).

   -  Check Version (cver).

   -  Abort (abrt).

   -  Try Each (try).

   -  Copy (copy).

   -  Swap (swap).

   -  Wait For Event (wfe).

   -  Run Sequence (srun) mandatory component set.

   -  Run with Arguments (arun).

5.4.3.  Command Behavior

   The following table describes the behavior of each command. "params"
   represents the parameters for the current component or dependency.

   +------+------------------------------------------------------------+
   | Code | Operation                                                  |
   +------+------------------------------------------------------------+
   | cvid | binary-match(component, params[vendor-id])                 |
   |      |                                                            |
   | ccid | binary-match(component, params[class-id])                  |
   |      |                                                            |
   | cimg | binary-match(digest(component), params[digest])            |
   |      |                                                            |
   | setc | component := components[arg]                               |
   |      |                                                            |
   | ovrp | params[k] := v for k,v in arg                              |
   |      |                                                            |
   | setd | dependency := dependencies[arg]                            |
   |      |                                                            |
   | setp | params[k] := v if not k in params for k,v in arg           |
   |      |                                                            |
   | pdep | exec(dependency[common]); exec(dependency[current-         |
   |      | segment])                                                  |
   |      |                                                            |
   | run  | run(component)                                             |
   |      |                                                            |
   | getc | store(component, fetch(params[uri]))                       |
   |      |                                                            |
   | ubf  | assert(now() < arg)                                        |



Moran, et al.          Expires September 10, 2020              [Page 16]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   |      |                                                            |
   | cco  | assert(offsetof(component) == arg)                         |
   |      |                                                            |
   | cdid | binary-match(component, params[device-id])                 |
   |      |                                                            |
   | nimg | not binary-match(digest(component), params[digest])        |
   |      |                                                            |
   | minb | assert(battery >= arg)                                     |
   |      |                                                            |
   | auth | assert(isAuthorized())                                     |
   |      |                                                            |
   | cver | assert(version_check(component, arg))                      |
   |      |                                                            |
   | abrt | assert(0)                                                  |
   |      |                                                            |
   | try  | break if exec(seq) is not error for seq in arg             |
   |      |                                                            |
   | copy | store(component, params[src-component])                    |
   |      |                                                            |
   | swap | swap(component, params[src-component])                     |
   |      |                                                            |
   | wfe  | until event(arg), wait                                     |
   |      |                                                            |
   | srun | exec(arg)                                                  |
   |      |                                                            |
   | arun | run(component, arg)                                        |
   +------+------------------------------------------------------------+

5.5.  Serialized Processing Interpreter

   Because each manifest has a list of components and a list of
   components defined by its dependencies, it is possible for the
   manifest processor to handle one component at a time, traversing the
   manifest tree once for each listed component.  In this mode, the
   interpreter ignores any commands executed while the component index
   is not the current component.  This reduces the overall volatile
   storage required to process the update so that the only limit on
   number of components is the size of the manifest.  However, this
   approach requires additional processing power.

5.6.  Parallel Processing Interpreter

   Advanced devices may make use of the Strict Order parameter and
   enable parallel processing of some segments, or it may reorder some
   segments.  To perform parallel processing, once the Strict Order
   parameter is set to False, the device may fork a process for each
   command until the Strict Order parameter is returned to True or the
   command sequence ends.  Then, it joins all forked processes before



Moran, et al.          Expires September 10, 2020              [Page 17]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   continuing processing of commands.  To perform out-of-order
   processing, a similar approach is used, except the device consumes
   all commands after the Strict Order parameter is set to False, then
   it sorts these commands into its preferred order, invokes them all,
   then continues processing.

   Under each of these scenarios the parallel processing must halt:

   -  Set Parameters.

   -  Override Parameters.

   -  Set Strict Order = True.

   -  Set Dependency Index.

   -  Set Component Index.

   To perform more useful parallel operations, sequences of commands may
   be collected in a suit-directive-run-sequence.  Then, each of these
   sequences may be run in parallel.  Each sequence defaults to Strict
   Order = True.  To isolate each sequence from each other sequence,
   each sequence must declare a single target component.  Set Component
   Index is not permitted inside this sequence.

5.7.  Processing Dependencies

   As described in Section 5.2, each manifest must invoke each of its
   dependencies sections from the corresponding section of the
   dependent.  Any changes made to parameters by the dependency persist
   in the dependent.

   When a Process Dependency command is encountered, the interpreter
   loads the dependency identified by the Current Dependency Index.  The
   interpreter first executes the common-sequence section of the
   identified dependency, then it executes the section of the dependency
   that corresponds to the currently executing section of the dependent.

   The interpreter also performs the checks described in Section 5.2 to
   ensure that the dependent is processing the dependency correctly.

6.  Creating Manifests

   Manifests are created using tools for constructing COSE structures,
   calculating cryptographic values and compiling desired system state
   into a sequence of operations required to achieve that state.  The
   process of constructing COSE structures is covered in [RFC8152] and




Moran, et al.          Expires September 10, 2020              [Page 18]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   the calculation of cryptographic values is beyond the scope of this
   document.

   Compiling desired system state into a sequence of operations can be
   accomplished in many ways, however several templates are provided
   here to cover common use-cases.  Many of these templates can be
   aggregated to produce more complex behavior.

   NOTE: On systems that support only a single component, Set Current
   Component has no effect and can be omitted.

   NOTE: Digest should always be set using Override Parameters, since
   this prevents a less-privileged dependent from replacing the digest.

6.1.  Manifest Source Material

   When a manifest is constructed from a descriptive document, the
   descriptive document SHOULD be included in the severable text
   section.  This section MAY be pruned from the manifest prior to
   distribution to a device.  The inclusion of text source material
   enables several use-cases on unconstrained intermediate systems,
   where small manifest size, low parser complexity, and pull parsing
   are not required.

   An unconstrained system that makes decisions based on the manifest
   can use the source material instead so that it does not need to
   execute the manifest.

   An unconstrained system that presents data to a user can do so
   according to typical usage patterns without first executing the
   manifest, and can trust that information with the same level of
   confidence as the manifest itself.

   A verifier can be constructed to emulate execution the manifest and
   compare the results of that execution to the source material,
   providing a check that the manifest performs its stated objectives
   and that the manifest does not exceed the capabilities of the target
   device.

6.2.  Required Template: Compatibility Check

   The compatibility check ensures that devices only install compatible
   images.

   Common: Set Current Component Check Vendor Identifier Check Class
   Identifier





Moran, et al.          Expires September 10, 2020              [Page 19]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   All manifests MUST contain the compatibility check template, except
   as outlined below.

   If a device class has a unique trust anchor, and every element in its
   trust chain is unique-different from every element in any other
   device class, then it MAY include the compatibility check.

   If a manifest includes a dependency that performs a compatibility
   check, then the dependent manifest MAY include the compatibility
   check.

   The compatibility check template contains a data dependency: Vendor
   Identifier and Class Identifier MUST be set prior to executing the
   template.  One example of the full template is included below,
   however Parameters may be set within a Try-Each block as well.  They
   may also be inherited from a dependent manifest.

   -  Common:

      o  Set Current Component.

      o  Set Parameters:

         *  Vendor ID.

         *  Class ID.

      o  Check Vendor Identifier.

      o  Check Class Identifier.

6.3.  Use Case Template: XIP Secure Boot

   -  Common:

      o  Set Current Component.

      o  Override Parameters:

         *  Digest.

         *  Size.

   -  Run:

      o  Set Current Component.

      o  Check Image Match.



Moran, et al.          Expires September 10, 2020              [Page 20]


Internet-Draft             SUIT CBOR Manifest                 March 2020


      o  Directive Run.

6.4.  Use Case Template: Firmware Download

   -  Common:

      o  Set Current Component.

      o  Override Parameters:

         *  Digest.

         *  Size.

   -  Install:

      o  Set Current Component.

      o  Set Parameters:

         *  URI.

      o  Fetch.

6.5.  Use Case Template: Load from External Storage

   -  Load:

      o  Set Current Component.

      o  Set Parameters:

         *  Source Index.

      o  Copy.

6.6.  Use Case Template Load & Decompress from External Storage

   -  Load:

      o  Set Current Component.

      o  Set Parameters:

         *  Source Index.

         *  Compression Info.




Moran, et al.          Expires September 10, 2020              [Page 21]


Internet-Draft             SUIT CBOR Manifest                 March 2020


      o  Copy.

6.7.  Use Case Template: Dependency

   -  Dependency Resolution:

      o  Set Current Dependency.

      o  Set Parameters:

         *  URI.

      o  Fetch.

      o  Check Image Match.

      o  Process Dependency.

   -  Validate:

      o  Set Current Dependency.

      o  Check Image Match.

      o  Process Dependency.

   For any other section that the dependency has, the dependent MUST
   invoke Process Dependency.

   NOTE: Any changes made to parameters in a dependency persist in the
   dependent.

7.  Manifest Structure

   The manifest is enveloped in a CBOR map containing:

   1.  Authentication delegation chain(s)

   2.  The authentication wrapper (a list of COSE sign/MAC objects)

   3.  The manifest (a map)

       1.   Critical Information

       2.   Information shared by all command sequences

            1.  List of dependencies




Moran, et al.          Expires September 10, 2020              [Page 22]


Internet-Draft             SUIT CBOR Manifest                 March 2020


            2.  List of payloads

            3.  List of payloads in dependencies

            4.  Common list of conditions, directives

       3.   Reference URI

       4.   Dependency resolution Reference or conditions/directives

       5.   Payload fetch Reference or conditions/directives

       6.   Installation Reference or conditions/directives

       7.   Verification conditions/directives

       8.   Load conditions/directives

       9.   Run conditions/directives

       10.  Text / Reference

       11.  COSWID / Reference

   4.  Dependency resolution conditions/directives

   5.  Payload fetch conditions/directives

   6.  Installation conditions/directives

   7.  Text

   8.  COSWID

   9.  Inline Payload(s)

   All elements in the outer map are wrapped in bstr.














Moran, et al.          Expires September 10, 2020              [Page 23]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   +--------------------+
   | Manifest Envelope  |
   +--------------------+
   | Delegation CWTs    |
   | COSE Envelopes     |
   | Manifest --------------------> +-----------------------+
   | Severable Elements |           | Manifest (bstr)       |
   +--------------------+           +-----------------------+
                                    | Structure Version     |
                                    | Sequence Number       |
   +-----------------------+ <------- Common Info           |
   | Common Info (bstr)    |        | Reference URI         |
   +-----------------------+        | Installation Commands ---+
   | Dependencies          |        | Invocation Commands -----+
   | Components IDs        |        | Protected Elements    |  |
   | Component References  |        +-----------------------+  |
   | Common Commands --------+                                 |
   +-----------------------+ |                                 |
                             +-> +-----------------------+ <---+
                                 | Commands (bstr)       |
                                 +-----------------------+
                                 | List of ( pairs of (  |
                                 |   * command ID code   |
                                 |   * argument          |
                                 | ))                    |
                                 +-----------------------+

   The map indices in this encoding are reset to 1 for each map within
   the structure.  This is to keep the indices as small as possible.
   The goal is to keep the index objects to single bytes (CBOR positive
   integers 1-23).

   Wherever enumerations are used, they are started at 1.  This allows
   detection of several common software errors that are caused by
   uninitialised variables.  Positive numbers in enumerations are
   reserved for IANA registration.  Negative numbers are used to
   identify application-specific implementations.

   CDDL names are hyphenated and CDDL structures follow the convention
   adopted in COSE [RFC8152]: SUIT_Structure_Name.

7.1.  Severable Elements

   Because the manifest can be used by different actors at different
   times, some parts of the manifest can be removed without affecting
   later stages of the lifecycle.  This is called "Severing."  Severing
   of information is achieved by separating that information from the
   signed container so that removing it does not affect the signature.



Moran, et al.          Expires September 10, 2020              [Page 24]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   This means that ensuring authenticity of severable parts of the
   manifest is a requirement for the signed portion of the manifest.
   Severing some parts makes it possible to discard parts of the
   manifest that are no longer necessary.  This is important because it
   allows the storage used by the manifest to be greatly reduced.  For
   example, no text size limits are needed if text is removed from the
   manifest prior to delivery to a constrained device.

   Elements are made severable by removing them from the manifest,
   encoding them in a bstr, and placing a SUIT_Digest of the bstr in the
   manifest so that they can still be authenticated.  The SUIT_Digest
   typically consumes 4 bytes more than the size of the raw digest,
   therefore elements smaller than (Digest Bits)/8 + 4 SHOULD never be
   severable.  Elements larger than (Digest Bits)/8 + 4 MAY be
   severable, while elements that are much larger than (Digest Bits)/8 +
   4 SHOULD be severable.

   Because of this, all command sequences in the manifest are encoded in
   a bstr so that there is a single code path needed for all command
   sequences

7.2.  Envelope

   This object is a container for the other pieces of the manifest to
   provide a common mechanism to find each of the parts.  All elements
   of the envelope are contained in bstr objects.  Wherever the manifest
   references an object in the envelope, the bstr is included in the
   digest calculation.

   The CDDL that describes the envelope is below





















Moran, et al.          Expires September 10, 2020              [Page 25]


Internet-Draft             SUIT CBOR Manifest                 March 2020


SUIT_Envelope = {
    suit-delegation            => bstr .cbor SUIT_Delegation
    suit-authentication-wrapper
        => bstr .cbor SUIT_Authentication_Wrapper / nil,
    $$SUIT_Manifest_Wrapped,
    * $$SUIT_Severed_Fields,
}

SUIT_Delegation = [ + [ + CWT ] ]

SUIT_Authentication_Wrapper = [ + bstr .cbor SUIT_Authentication_Block ]

SUIT_Authentication_Block /= COSE_Mac_Tagged
SUIT_Authentication_Block /= COSE_Sign_Tagged
SUIT_Authentication_Block /= COSE_Mac0_Tagged
SUIT_Authentication_Block /= COSE_Sign1_Tagged

$$SUIT_Manifest_Wrapped //= (suit-manifest  => bstr .cbor SUIT_Manifest)
$$SUIT_Manifest_Wrapped //= (
    suit-manifest-encryption-info => bstr .cbor SUIT_Encryption_Wrapper,
    suit-manifest-encrypted       => bstr
)

SUIT_Encryption_Wrapper = COSE_Encrypt_Tagged / COSE_Encrypt0_Tagged

$$SUIT_Severed_Fields //= ( suit-dependency-resolution =>
    bstr .cbor SUIT_Command_Sequence)
$$SUIT_Severed_Fields //= (suit-payload-fetch =>
    bstr .cbor SUIT_Command_Sequence)
$$SUIT_Severed_Fields //= (suit-install =>
    bstr .cbor SUIT_Command_Sequence)
$$SUIT_Severed_Fields //= (suit-text =>
    bstr .cbor SUIT_Text_Map)
$$SUIT_Severed_Fields //= (suit-coswid =>
    bstr .cbor concise-software-identity)

   All elements of the envelope must be wrapped in a bstr to minimize
   the complexity of the code that evaluates the cryptographic integrity
   of the element and to ensure correct serialization for integrity and
   authenticity checks.

   The suit-authentication-wrapper contains a list of 1 or more
   cryptographic authentication wrappers for the core part of the
   manifest.  These are implemented as COSE_Mac_Tagged or
   COSE_Sign_Tagged blocks.  Each of these blocks contains a SUIT_Digest
   of the manifest.  This enables modular processing of the manifest.
   The COSE_Mac_Tagged and COSE_Sign_Tagged blocks are described in RFC
   8152 [RFC8152] and are beyond the scope of this document.  The suit-



Moran, et al.          Expires September 10, 2020              [Page 26]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   authentication-wrapper MUST come before any element in the
   SUIT_Envelope, except for the OPTIONAL suit-delegation, regardless of
   canonical encoding of CBOR.  All validators MUST reject any
   SUIT_Envelope that begins with any element other than a suit-
   authentication-wrapper or suit-delegation.

   A SUIT_Envelope that has not had authentication information added
   MUST still contain the suit-authentication-wrapper element, but the
   content MUST be nil.

   The envelope MUST contain only one of

   -  a plaintext manifest: SUIT_Manifest.

   -  an encrypted manifest: both a SUIT_Encryption_Wrapper and the
      ciphertext of a manifest.

   When the envelope contains SUIT_Encryption_Wrapper, the suit-
   authentication-wrapper MUST authenticate the plaintext of suit-
   manifest-encrypted.  This ensures that the manifest can be stored
   decrypted and that a recipient MAY convert the suit-manifest-
   encrypted element to a suit-manifest element.

   suit-manifest contains a SUIT_Manifest structure, which describes the
   payload(s) to be installed and any dependencies on other manifests.

   suit-manifest-encryption-info contains a SUIT_Encryption_Wrapper, a
   COSE object that describes the information required to decrypt a
   ciphertext manifest.

   suit-manifest-encrypted contains a ciphertext manifest.

   Each of suit-dependency-resolution, suit-payload-fetch, and suit-
   payload-installation contain the severable contents of the
   identically named portions of the manifest, described in Section 7.3.

   suit-text contains all the human-readable information that describes
   any and all parts of the manifest, its payload(s) and its
   resource(s).

   suit-coswid contains a Concise Software Identifier.  This may be
   discarded by the Recipient if not needed.

7.3.  Manifest

   The manifest describes the critical metadata for the referenced
   payload(s).  In addition, it contains:




Moran, et al.          Expires September 10, 2020              [Page 27]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   1.  a version number for the manifest structure itself

   2.  a sequence number

   3.  a list of dependencies

   4.  a list of components affected

   5.  a list of components affected by dependencies

   6.  a reference for each of the severable blocks.

   7.  a list of actions that the Recipient should perform.

   The following CDDL fragment defines the manifest.




































Moran, et al.          Expires September 10, 2020              [Page 28]


Internet-Draft             SUIT CBOR Manifest                 March 2020


  SUIT_Manifest = {
      suit-manifest-version         => 1,
      suit-manifest-sequence-number => uint,
      suit-common                   => bstr .cbor SUIT_Common,
      ? suit-reference-uri          => #6.32(tstr),
      * $$SUIT_Severable_Command_Sequences,
      * $$SUIT_Command_Sequences,
      * $$SUIT_Protected_Elements,
  }

  $$SUIT_Severable_Command_Sequences //= (suit-dependency-resolution =>
      SUIT_Severable_Command_Segment)
  $$SUIT_Severable_Command_Segments //= (suit-payload-fetch =>
      SUIT_Severable_Command_Sequence)
  $$SUIT_Severable_Command_Segments //= (suit-install =>
      SUIT_Severable_Command_Sequence)

  SUIT_Severable_Command_Sequence =
      SUIT_Digest / bstr .cbor SUIT_Command_Sequence

  $$SUIT_Command_Sequences //= ( suit-validate =>
      bstr .cbor SUIT_Command_Sequence )
  $$SUIT_Command_Sequences //= ( suit-load =>
      bstr .cbor SUIT_Command_Sequence )
  $$SUIT_Command_Sequences //= ( suit-run =>
      bstr .cbor SUIT_Command_Sequence )

  $$SUIT_Protected_Elements //= ( suit-text => SUIT_Digest )
  $$SUIT_Protected_Elements //= ( suit-coswid => SUIT_Digest )

  SUIT_Common = {
      ? suit-dependencies           => bstr .cbor SUIT_Dependencies,
      ? suit-components             => bstr .cbor SUIT_Components,
      ? suit-dependency-components
          => bstr .cbor SUIT_Component_References,
      ? suit-common-sequence        => bstr .cbor SUIT_Command_Sequence,
  }

   Several fields in the Manifest can be either a CBOR structure or a
   SUIT_Digest.  In each of these cases, the SUIT_Digest provides for a
   severable field.  Severable fields are RECOMMENDED to implement.  In
   particular, text SHOULD be severable, since most useful text elements
   occupy more space than a SUIT_Digest, but are not needed by the
   Recipient.  Because SUIT_Digest is a CBOR Array and each severable
   element is a CBOR bstr, it is straight-forward for a Recipient to
   determine whether an element is been severable.  The key used for a
   severable element is the same in the SUIT_Manifest and in the




Moran, et al.          Expires September 10, 2020              [Page 29]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   SUIT_Envelope so that a Recipient can easily identify the correct
   data in the envelope.

   The suit-manifest-version indicates the version of serialization used
   to encode the manifest.  Version 1 is the version described in this
   document. suit-manifest-version is REQUIRED.

   The suit-manifest-sequence-number is a monotonically increasing anti-
   rollback counter.  It also helps devices to determine which in a set
   of manifests is the "root" manifest in a given update.  Each manifest
   MUST have a sequence number higher than each of its dependencies.
   Each Recipient MUST reject any manifest that has a sequence number
   lower than its current sequence number.  It MAY be convenient to use
   a UTC timestamp in seconds as the sequence number. suit-manifest-
   sequence-number is REQUIRED.

   suit-common encodes all the information that is shared between each
   of the command sequences, including: suit-dependencies, suit-
   components, suit-dependency-components, and suit-common-sequence.
   suit-common is REQUIRED to implement.

   suit-dependencies is a list of SUIT_Dependency blocks that specify
   manifests that must be present before the current manifest can be
   processed. suit-dependencies is OPTIONAL to implement.

   In order to distinguish between components that are affected by the
   current manifest and components that are affected by a dependency,
   they are kept in separate lists.  Components affected by the current
   manifest only list the component identifier.  Components affected by
   a dependency include the component identifier and the index of the
   dependency that defines the component.

   suit-components is a list of SUIT_Component blocks that specify the
   component identifiers that will be affected by the content of the
   current manifest. suit-components is OPTIONAL, but at least one
   manifest MUST contain a suit-components block.

   suit-dependency-components is a list of SUIT_Component_Reference
   blocks that specify component identifiers that will be affected by
   the content of a dependency of the current manifest. suit-dependency-
   components is OPTIONAL.

   suit-common-sequence is a SUIT_Command_Sequence to execute prior to
   executing any other command sequence.  Typical actions in suit-
   common-sequence include setting expected device identity and image
   digests when they are conditional (see Section 10 for more
   information on conditional sequences). suit-common-sequence is
   RECOMMENDED.



Moran, et al.          Expires September 10, 2020              [Page 30]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   suit-reference-uri is a text string that encodes a URI where a full
   version of this manifest can be found.  This is convenient for
   allowing management systems to show the severed elements of a
   manifest when this URI is reported by a device after installation.

   suit-dependency-resolution is a SUIT_Command_Sequence to execute in
   order to perform dependency resolution.  Typical actions include
   configuring URIs of dependency manifests, fetching dependency
   manifests, and validating dependency manifests' contents. suit-
   dependency-resolution is REQUIRED when suit-dependencies is present.

   suit-payload-fetch is a SUIT_Command_Sequence to execute in order to
   obtain a payload.  Some manifests may include these actions in the
   suit-install section instead if they operate in a streaming
   installation mode.  This is particularly relevant for constrained
   devices without any temporary storage for staging the update. suit-
   payload-fetch is OPTIONAL.

   suit-install is a SUIT_Command_Sequence to execute in order to
   install a payload.  Typical actions include verifying a payload
   stored in temporary storage, copying a staged payload from temporary
   storage, and unpacking a payload. suit-install is OPTIONAL.

   suit-validate is a SUIT_Command_Sequence to execute in order to
   validate that the result of applying the update is correct.  Typical
   actions involve image validation and manifest validation. suit-
   validate is REQUIRED.  If the manifest contains dependencies, one
   process-dependency invocation per dependency or one process-
   dependency invocation targeting all dependencies SHOULD be present in
   validate.

   suit-load is a SUIT_Command_Sequence to execute in order to prepare a
   payload for execution.  Typical actions include copying an image from
   permanent storage into RAM, optionally including actions such as
   decryption or decompression. suit-load is OPTIONAL.

   suit-run is a SUIT_Command_Sequence to execute in order to run an
   image. suit-run typically contains a single instruction: either the
   "run" directive for the bootable manifest or the "process
   dependencies" directive for any dependents of the bootable manifest.
   suit-run is OPTIONAL.  Only one manifest in an update may contain the
   "run" directive.

   suit-text is a digest that uniquely identifies the content of the
   Text that is packaged in the SUIT_Envelope. text is OPTIONAL.






Moran, et al.          Expires September 10, 2020              [Page 31]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   suit-coswid is a digest that uniquely identifies the content of the
   concise-software-identifier that is packaged in the SUIT_Envelope.
   coswid is OPTIONAL.

7.4.  SUIT_Dependency

   SUIT_Dependency specifies a manifest that describes a dependency of
   the current manifest.

   The following CDDL describes the SUIT_Dependency structure.

   SUIT_Dependency = {
       suit-dependency-digest => SUIT_Digest,
       ? suit-dependency-prefix => SUIT_Component_Identifier,
   }

   The suit-dependency-digest specifies the dependency manifest uniquely
   by identifying a particular Manifest structure.  The digest is
   calculated over the Manifest structure instead of the COSE
   Sig_structure or Mac_structure.  This means that a digest may need to
   be calculated more than once, however this is necessary to ensure
   that removing a signature from a manifest does not break dependencies
   due to missing signature elements.  This is also necessary to support
   the trusted intermediary use case, where an intermediary re-signs the
   Manifest, removing the original signature, potentially with a
   different algorithm, or trading COSE_Sign for COSE_Mac.

   The suit-dependency-prefix element contains a
   SUIT_Component_Identifier.  This specifies the scope at which the
   dependency operates.  This allows the dependency to be forwarded on
   to a component that is capable of parsing its own manifests.  It also
   allows one manifest to be deployed to multiple dependent devices
   without those devices needing consistent component hierarchy.  This
   element is OPTIONAL.

7.5.  SUIT_Component_Reference

   The SUIT_Component_Reference describes an image that is defined by
   another manifest.  This is useful for overriding the behavior of
   another manifest, for example by directing the recipient to look at a
   different URI for the image or by changing the expected format, such
   as when a gateway performs decryption on behalf of a constrained
   device.  The following CDDL describes the SUIT_Component_Reference.

   SUIT_Component_Reference = {
       suit-component-identifier => SUIT_Component_Identifier,
       suit-component-dependency-index => uint
   }



Moran, et al.          Expires September 10, 2020              [Page 32]


Internet-Draft             SUIT CBOR Manifest                 March 2020


7.6.  Manifest Parameters

   Many conditions and directives require additional information.  That
   information is contained within parameters that can be set in a
   consistent way.  This allows reduction of manifest size and
   replacement of parameters from one manifest to the next.

   The defined manifest parameters are described below.

   +------+---------+------------+-------------+-----------------------+
   | ID   | CBOR    | Scope      | Name        | Description           |
   |      | Type    |            |             |                       |
   +------+---------+------------+-------------+-----------------------+
   | 1    | bstr    | Component  | Vendor ID   | A RFC4122 UUID        |
   |      |         | / Global   |             | representing the      |
   |      |         |            |             | vendor of the device  |
   |      |         |            |             | or component          |
   |      |         |            |             |                       |
   | 2    | bstr    | Component  | Class ID    | A RFC4122 UUID        |
   |      |         | / Global   |             | representing the      |
   |      |         |            |             | class of the device   |
   |      |         |            |             | or component          |
   |      |         |            |             |                       |
   | 3    | bstr    | Component  | Image       | A SUIT_Digest         |
   |      |         | /          | Digest      |                       |
   |      |         | Dependency |             |                       |
   |      |         |            |             |                       |
   | 4    | uint    | Component  | Use Before  | POSIX timestamp       |
   |      |         | / Global   |             |                       |
   |      |         |            |             |                       |
   | 5    | uint    | Component  | Component   | Offset of the         |
   |      |         |            | Offset      | component             |
   |      |         |            |             |                       |
   | 12   | boolean | Global     | Strict      | Requires that the     |
   |      |         |            | Order       | manifest is processed |
   |      |         |            |             | in a strictly linear  |
   |      |         |            |             | fashion. Set to 0 to  |
   |      |         |            |             | enable parallel       |
   |      |         |            |             | handling of manifest  |
   |      |         |            |             | directives.           |
   |      |         |            |             |                       |
   | 13   | boolean | Command    | Soft        | Condition failures    |
   |      |         | Segment    | Failure     | only terminate the    |
   |      |         |            |             | current command       |
   |      |         |            |             | segment.              |
   |      |         |            |             |                       |
   | 14   | uint    | Component  | Image Size  | Integer size          |
   |      |         | /          |             |                       |



Moran, et al.          Expires September 10, 2020              [Page 33]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   |      |         | Dependency |             |                       |
   |      |         |            |             |                       |
   | 18   | bstr    | Component  | Encryption  | A COSE object         |
   |      |         | /          | Info        | defining the          |
   |      |         | Dependency |             | encryption mode of a  |
   |      |         |            |             | resource              |
   |      |         |            |             |                       |
   | 19   | bstr    | Component  | Compression | The information       |
   |      |         |            | Info        | required to           |
   |      |         |            |             | decompress the image  |
   |      |         |            |             |                       |
   | 20   | bstr    | Component  | Unpack Info | The information       |
   |      |         |            |             | required to unpack    |
   |      |         |            |             | the image             |
   |      |         |            |             |                       |
   | 21   | tstr    | Component  | URI         | A URI from which to   |
   |      |         | /          |             | fetch a resource      |
   |      |         | Dependency |             |                       |
   |      |         |            |             |                       |
   | 22   | uint    | Component  | Source      | A Component Index     |
   |      |         |            | Component   |                       |
   |      |         |            |             |                       |
   | 23   | bstr /  | Component  | Run         | An encoded set of     |
   |      | nil     |            | Arguments   | arguments for Run     |
   |      |         |            |             |                       |
   | 24   | bstr    | Component  | Device ID   | A RFC4122 UUID        |
   |      |         | / Global   |             | representing the      |
   |      |         |            |             | device or component   |
   |      |         |            |             |                       |
   | 25   | uint    | Global     | Minimum     | A minimum battery     |
   |      |         |            | Battery     | level in mWh          |
   |      |         |            |             |                       |
   | 26   | int     | Component  | Priority    | The priority of the   |
   |      |         | / Global   |             | update                |
   |      |         |            |             |                       |
   | nint | int /   | Custom     | Custom      | Application-defined   |
   |      | bstr /  |            | Parameter   | parameter             |
   |      | tstr    |            |             |                       |
   +------+---------+------------+-------------+-----------------------+

   CBOR-encoded object parameters are still wrapped in a bstr.  This is
   because it allows a parser that is aggregating parameters to
   reference the object with a single pointer and traverse it without
   understanding the contents.  This is important for modularization and
   division of responsibility within a pull parser.  The same
   consideration does not apply to Directives because those elements are
   invoked with their arguments immediately




Moran, et al.          Expires September 10, 2020              [Page 34]


Internet-Draft             SUIT CBOR Manifest                 March 2020


7.6.1.  SUIT_Parameter_Strict_Order

   The Strict Order Parameter allows a manifest to govern when
   directives can be executed out-of-order.  This allows for systems
   that have a sensitivity to order of updates to choose the order in
   which they are executed.  It also allows for more advanced systems to
   parallelize their handling of updates.  Strict Order defaults to
   True.  It MAY be set to False when the order of operations does not
   matter.  When arriving at the end of a command sequence, ALL commands
   MUST have completed, regardless of the state of
   SUIT_Parameter_Strict_Order.  If SUIT_Parameter_Strict_Order is
   returned to True, ALL preceding commands MUST complete before the
   next command is executed.

7.6.2.  SUIT_Parameter_Soft_Failure

   When executing a command sequence inside SUIT_Directive_Try_Each and
   a condition failure occurs, the manifest processor aborts the
   sequence.  If Soft Failure is True, it returns Success.  Otherwise,
   it returns the original condition failure.
   SUIT_Parameter_Soft_Failure is scoped to the enclosing
   SUIT_Command_Sequence.  Its value is discarded when
   SUIT_Command_Sequence terminates.

7.7.  SUIT_Parameter_Encryption_Info

   Encryption Info defines the mechanism that Fetch or Copy should use
   to decrypt the data they transfer.  SUIT_Parameter_Encryption_Info is
   encoded as a COSE_Encrypt_Tagged or a COSE_Encrypt0_Tagged, wrapped
   in a bstr.

7.7.1.  SUIT_Parameter_Compression_Info

   Compression Info defines any information that is required for a
   device to perform decompression operations.  Typically, this includes
   the algorithm identifier.

   SUIT_Parameter_Compression_Info is defined by the following CDDL:













Moran, et al.          Expires September 10, 2020              [Page 35]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   SUIT_Compression_Info = {
       suit-compression-algorithm => SUIT_Compression_Algorithms
       ? suit-compression-parameters => bstr
   }


   SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_gzip
   SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_bzip2
   SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_deflate
   SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_LZ4
   SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_lzma


7.7.2.  SUIT_Parameter_Unpack_Info

   SUIT_Unpack_Info defines the information required for a device to
   interpret a packed format, such as elf, hex, or binary diff.
   SUIT_Unpack_Info is defined by the following CDDL:

   SUIT_Unpack_Info = {
       suit-unpack-algorithm => SUIT_Unpack_Algorithms
       ? suit-unpack-parameters => bstr
   }

   SUIT_Unpack_Algorithms //= SUIT_Unpack_Algorithm_Delta
   SUIT_Unpack_Algorithms //= SUIT_Unpack_Algorithm_Hex
   SUIT_Unpack_Algorithms //= SUIT_Unpack_Algorithm_Elf


7.7.3.  SUIT_Parameters CDDL

   The following CDDL describes all SUIT_Parameters.

  SUIT_Parameters //= (suit-parameter-vendor-identifier => RFC4122_UUID)
  SUIT_Parameters //= (suit-parameter-class-identifier => RFC4122_UUID)
  SUIT_Parameters //= (suit-parameter-image-digest
      => bstr .cbor SUIT_Digest)
  SUIT_Parameters //= (suit-parameter-image-size => uint)
  SUIT_Parameters //= (suit-parameter-use-before => uint)
  SUIT_Parameters //= (suit-parameter-component-offset => uint)

  SUIT_Parameters //= (suit-parameter-encryption-info
      => bstr .cbor SUIT_Encryption_Info)
  SUIT_Parameters //= (suit-parameter-compression-info
      => bstr .cbor SUIT_Compression_Info)
  SUIT_Parameters //= (suit-parameter-unpack-info
      => bstr .cbor SUIT_Unpack_Info)




Moran, et al.          Expires September 10, 2020              [Page 36]


Internet-Draft             SUIT CBOR Manifest                 March 2020


  SUIT_Parameters //= (suit-parameter-uri => tstr)
  SUIT_Parameters //= (suit-parameter-source-component => uint)
  SUIT_Parameters //= (suit-parameter-run-args => bstr)

  SUIT_Parameters //= (suit-parameter-device-identifier => RFC4122_UUID)
  SUIT_Parameters //= (suit-parameter-minimum-battery => uint)
  SUIT_Parameters //= (suit-parameter-update-priority => uint)
  SUIT_Parameters //= (suit-parameter-version =>
      SUIT_Parameter_Version_Match)
  SUIT_Parameters //= (suit-parameter-wait-info =>
      bstr .cbor SUIT_Wait_Events)


  SUIT_Parameters //= (suit-parameter-uri-list
      => bstr .cbor SUIT_Component_URI_List)
  SUIT_Parameters //= (suit-parameter-custom => int/bool/tstr/bstr)

  SUIT_Parameters //= (suit-parameter-strict-order => bool)
  SUIT_Parameters //= (suit-parameter-soft-failure => bool)

  RFC4122_UUID = bstr .size 16

  SUIT_Condition_Version_Comparison_Value = [+int]

  SUIT_Encryption_Info = COSE_Encrypt_Tagged/COSE_Encrypt0_Tagged
  SUIT_Compression_Info = {
      suit-compression-algorithm => SUIT_Compression_Algorithms,
      ? suit-compression-parameters => bstr
  }

  SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_gzip
  SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_bzip2
  SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_lz4
  SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_lzma

  SUIT_Unpack_Info = {
      suit-unpack-algorithm => SUIT_Unpack_Algorithms,
      ? suit-unpack-parameters => bstr
  }

  SUIT_Unpack_Algorithms /= SUIT_Unpack_Algorithm_Delta
  SUIT_Unpack_Algorithms /= SUIT_Unpack_Algorithm_Hex
  SUIT_Unpack_Algorithms /= SUIT_Unpack_Algorithm_Elf








Moran, et al.          Expires September 10, 2020              [Page 37]


Internet-Draft             SUIT CBOR Manifest                 March 2020


7.8.  SUIT_Command_Sequence

   A SUIT_Command_Sequence defines a series of actions that the
   Recipient MUST take to accomplish a particular goal.  These goals are
   defined in the manifest and include:

   1.  Dependency Resolution

   2.  Payload Fetch

   3.  Payload Installation

   4.  Image Validation

   5.  Image Loading

   6.  Run or Boot

   Each of these follows exactly the same structure to ensure that the
   parser is as simple as possible.

   Lists of commands are constructed from two kinds of element:

   1.  Conditions that MUST be true-any failure is treated as a failure
       of the update/load/boot

   2.  Directives that MUST be executed.

   The lists of commands are logically structured into sequences of zero
   or more conditions followed by zero or more directives.  The
   *logical* structure is described by the following CDDL:

   Command_Sequence = {
       conditions => [ * Condition],
       directives => [ * Directive]
   }

   This introduces significant complexity in the parser, however, so the
   structure is flattened to make parsing simpler:

   SUIT_Command_Sequence = [ + (SUIT_Condition/SUIT_Directive) ]

   Each condition is a command code identifier, followed by Nil. Each
   directive is composed of:

   1.  A command code identifier

   2.  An argument block or Nil



Moran, et al.          Expires September 10, 2020              [Page 38]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   Argument blocks are defined for each type of directive.

   Many conditions and directives apply to a given component, and these
   generally grouped together.  Therefore, a special command to set the
   current component index is provided with a matching command to set
   the current dependency index.  This index is a numeric index into the
   component ID tables defined at the beginning of the document.  For
   the purpose of setting the index, the two component ID tables are
   considered to be concatenated together.

   To facilitate optional conditions, a special directive is provided.
   It runs several new lists of conditions/directives, one after
   another, that are contained as an argument to the directive.  By
   default, it assumes that a failure of a condition should not indicate
   a failure of the update/boot, but a parameter is provided to override
   this behavior.

7.9.  SUIT_Condition

   Conditions are used to define mandatory properties of a system in
   order for an update to be applied.  They can be pre-conditions or
   post-conditions of any directive or series of directives, depending
   on where they are placed in the list.  Conditions never take
   arguments; conditions should test using parameters instead.
   Conditions include:


























Moran, et al.          Expires September 10, 2020              [Page 39]


Internet-Draft             SUIT CBOR Manifest                 March 2020


          +----------------+-------------------+----------------+
          | Condition Code | Condition Name    | Implementation |
          +----------------+-------------------+----------------+
          | 1              | Vendor Identifier | REQUIRED       |
          |                |                   |                |
          | 2              | Class Identifier  | REQUIRED       |
          |                |                   |                |
          | 3              | Image Match       | REQUIRED       |
          |                |                   |                |
          | 4              | Use Before        | OPTIONAL       |
          |                |                   |                |
          | 5              | Component Offset  | OPTIONAL       |
          |                |                   |                |
          | 24             | Device Identifier | OPTIONAL       |
          |                |                   |                |
          | 25             | Image Not Match   | OPTIONAL       |
          |                |                   |                |
          | 26             | Minimum Battery   | OPTIONAL       |
          |                |                   |                |
          | 27             | Update Authorized | OPTIONAL       |
          |                |                   |                |
          | 28             | Version           | OPTIONAL       |
          |                |                   |                |
          | nint           | Custom Condition  | OPTIONAL       |
          +----------------+-------------------+----------------+

   Each condition MUST report a success code on completion.  If a
   condition reports failure, then the current sequence of commands MUST
   terminate.  If a condition requires additional information, this MUST
   be specified in one or more parameters before the condition is
   executed.  If a Recipient attempts to process a condition that
   expects additional information and that information has not been set,
   it MUST report a failure.  If a Recipient encounters an unknown
   Condition Code, it MUST report a failure.

   Positive Condition numbers are reserved for IANA registration.
   Negative numbers are reserved for proprietary, application-specific
   directives.

7.9.1.  Identifier Conditions

   There are three identifier-based conditions: suit-condition-vendor-
   identifier, suit-condition-class-identifier, and suit-condition-
   device-identifier.  Each of these conditions match a RFC 4122
   [RFC4122] UUID that MUST have already been set as a parameter.  The
   installing device MUST match the specified UUID in order to consider
   the manifest valid.  These identifiers MAY be scoped by component.




Moran, et al.          Expires September 10, 2020              [Page 40]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   The Recipient uses the ID parameter that has already been set using
   the Set Parameters directive.  If no ID has been set, this condition
   fails. suit-condition-class-identifier and suit-condition-vendor-
   identifier are REQUIRED to implement. suit-condition-device-
   identifier is OPTIONAL to implement.

7.9.2.  suit-condition-image-match

   Verify that the current component matches the digest parameter for
   the current component.  The digest is verified against the digest
   specified in the Component's parameters list.  If no digest is
   specified, the condition fails. suit-condition-image-match is
   REQUIRED to implement.

7.9.3.  suit-condition-image-not-match

   Verify that the current component does not match the supplied digest.
   If no digest is specified, then the digest is compared against the
   digest specified in the Component's parameters list.  If no digest is
   specified, the condition fails. suit-condition-image-not-match is
   OPTIONAL to implement.

7.9.4.  suit-condition-use-before

   Verify that the current time is BEFORE the specified time. suit-
   condition-use-before is used to specify the last time at which an
   update should be installed.  The recipient evaluates the current time
   against the suit-parameter-use-before parameter, which must have
   already been set as a parameter, encoded as a POSIX timestamp, that
   is seconds after 1970-01-01 00:00:00.  Timestamp conditions MUST be
   evaluated in 64 bits, regardless of encoded CBOR size. suit-
   condition-use-before is OPTIONAL to implement.

7.9.5.  suit-condition-minimum-battery

   suit-condition-minimum-battery provides a mechanism to test a
   device's battery level before installing an update.  This condition
   is for use in primary-cell applications, where the battery is only
   ever discharged.  For batteries that are charged, suit-directive-wait
   is more appropriate, since it defines a "wait" until the battery
   level is sufficient to install the update. suit-condition-minimum-
   battery is specified in mWh. suit-condition-minimum-battery is
   OPTIONAL to implement.








Moran, et al.          Expires September 10, 2020              [Page 41]


Internet-Draft             SUIT CBOR Manifest                 March 2020


7.9.6.  suit-condition-update-authorized

   Request Authorization from the application and fail if not
   authorized.  This can allow a user to decline an update.  Argument is
   an integer priority level.  Priorities are application defined. suit-
   condition-update-authorized is OPTIONAL to implement.

7.9.7.  suit-condition-version

   suit-condition-version allows comparing versions of firmware.
   Verifying image digests is preferred to version checks because
   digests are more precise.  The image can be compared as:

   -  Greater.

   -  Greater or Equal.

   -  Equal.

   -  Lesser or Equal.

   -  Lesser.

   Versions are encoded as a CBOR list of integers.  Comparisons are
   done on each integer in sequence.  Comparison stops after all
   integers in the list defined by the manifest have been consumed OR
   after a non-equal match has occurred.  For example, if the manifest
   defines a comparison, "Equal [1]", then this will match all version
   sequences starting with 1.  If a manifest defines both "Greater or
   Equal [1,0]" and "Lesser [1,10]", then it will match versions 1.0.x
   up to, but not including 1.10.

   The following CDDL describes SUIT_Condition_Version_Argument


















Moran, et al.          Expires September 10, 2020              [Page 42]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   SUIT_Condition_Version_Argument = [
       suit-condition-version-comparison-type:
           SUIT_Condition_Version_Comparison_Types,
       suit-condition-version-comparison-value:
           SUIT_Condition_Version_Comparison_Value
   ]

   SUIT_Condition_Version_Comparison_Types /=
       suit-condition-version-comparison-greater
   SUIT_Condition_Version_Comparison_Types /=
       suit-condition-version-comparison-greater-equal
   SUIT_Condition_Version_Comparison_Types /=
       suit-condition-version-comparison-equal
   SUIT_Condition_Version_Comparison_Types /=
       suit-condition-version-comparison-lesser-equal
   SUIT_Condition_Version_Comparison_Types /=
       suit-condition-version-comparison-lesser

   SUIT_Condition_Version_Comparison_Value = [+int]

   While the exact encoding of versions is application-defined, semantic
   versions map conveniently.  For example,

   -  1.2.3 = [1,2,3].

   -  1.2-rc3 = [1,2,-1,3].

   -  1.2-beta = [1,2,-2].

   -  1.2-alpha = [1,2,-3].

   -  1.2-alpha4 = [1,2,-3,4].

   suit-condition-version is OPTIONAL to implement.

7.9.8.  SUIT_Condition_Custom

   SUIT_Condition_Custom describes any proprietary, application specific
   condition.  This is encoded as a negative integer, chosen by the
   firmware developer.  If additional information must be provided to
   the condition, it should be encoded in a custom parameter (a nint) as
   described in Section 7.6.  SUIT_Condition_Custom is OPTIONAL to
   implement.








Moran, et al.          Expires September 10, 2020              [Page 43]


Internet-Draft             SUIT CBOR Manifest                 March 2020


7.9.9.  Identifiers

   Many conditions use identifiers to determine whether a manifest
   matches a given Recipient or not.  These identifiers are defined to
   be RFC 4122 [RFC4122] UUIDs.  These UUIDs are explicitly NOT human-
   readable.  They are for machine-based matching only.

   A device may match any number of UUIDs for vendor or class
   identifier.  This may be relevant to physical or software modules.
   For example, a device that has an OS and one or more applications
   might list one Vendor ID for the OS and one or more additional Vendor
   IDs for the applications.  This device might also have a Class ID
   that must be matched for the OS and one or more Class IDs for the
   applications.

   A more complete example: A device has the following physical
   components: 1.  A host MCU 2.  A WiFi module

   This same device has three software modules: 1.  An operating system
   2.  A WiFi module interface driver 3.  An application

   Suppose that the WiFi module's firmware has a proprietary update
   mechanism and doesn't support manifest processing.  This device can
   report four class IDs:

   1.  hardware model/revision

   2.  OS

   3.  WiFi module model/revision

   4.  Application

   This allows the OS, WiFi module, and application to be updated
   independently.  To combat possible incompatibilities, the OS class ID
   can be changed each time the OS has a change to its API.

   This approach allows a vendor to target, for example, all devices
   with a particular WiFi module with an update, which is a very
   powerful mechanism, particularly when used for security updates.

7.9.9.1.  Creating UUIDs:

   UUIDs MUST be created according to RFC 4122 [RFC4122].  UUIDs SHOULD
   use versions 3, 4, or 5, as described in RFC4122.  Versions 1 and 2
   do not provide a tangible benefit over version 4 for this
   application.




Moran, et al.          Expires September 10, 2020              [Page 44]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   The RECOMMENDED method to create a vendor ID is: Vendor ID =
   UUID5(DNS_PREFIX, vendor domain name)

   The RECOMMENDED method to create a class ID is: Class ID =
   UUID5(Vendor ID, Class-Specific-Information)

   Class-specific information is composed of a variety of data, for
   example:

   -  Model number.

   -  Hardware revision.

   -  Bootloader version (for immutable bootloaders).

7.9.10.  SUIT_Condition CDDL

   The following CDDL describes SUIT_Condition:

   SUIT_Condition //= (suit-condition-vendor-identifier, nil)
   SUIT_Condition //= (suit-condition-class-identifier,  nil)
   SUIT_Condition //= (suit-condition-device-identifier, nil)
   SUIT_Condition //= (suit-condition-image-match,       nil)
   SUIT_Condition //= (suit-condition-image-not-match,   nil)
   SUIT_Condition //= (suit-condition-use-before,        nil)
   SUIT_Condition //= (suit-condition-minimum-battery,   nil)
   SUIT_Condition //= (suit-condition-update-authorized, nil)
   SUIT_Condition //= (suit-condition-version,           nil)
   SUIT_Condition //= (suit-condition-component-offset,  nil)

7.10.  SUIT_Directive

   Directives are used to define the behavior of the recipient.
   Directives include:

















Moran, et al.          Expires September 10, 2020              [Page 45]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   +--------------+--------------------+-------------------------------+
   | Directive    | Directive Name     | Implementation                |
   | Code         |                    |                               |
   +--------------+--------------------+-------------------------------+
   | 12           | Set Component      | REQUIRED if more than one     |
   |              | Index              | component                     |
   |              |                    |                               |
   | 13           | Set Dependency     | REQUIRED if dependencies used |
   |              | Index              |                               |
   |              |                    |                               |
   | 14           | Abort              | OPTIONAL                      |
   |              |                    |                               |
   | 15           | Try Each           | OPTIONAL                      |
   |              |                    |                               |
   | 16           | Reserved           | N/A                           |
   |              |                    |                               |
   | 17           | Reserved           | N/A                           |
   |              |                    |                               |
   | 18           | Process Dependency | OPTIONAL                      |
   |              |                    |                               |
   | 19           | Set Parameters     | OPTIONAL                      |
   |              |                    |                               |
   | 20           | Override           | REQUIRED                      |
   |              | Parameters         |                               |
   |              |                    |                               |
   | 21           | Fetch              | REQUIRED for Updater          |
   |              |                    |                               |
   | 22           | Copy               | OPTIONAL                      |
   |              |                    |                               |
   | 23           | Run                | REQUIRED for Bootloader       |
   |              |                    |                               |
   | 29           | Wait               | OPTIONAL                      |
   |              |                    |                               |
   | 30           | Run Sequence       | OPTIONAL                      |
   |              |                    |                               |
   | 32           | Swap               | OPTIONAL                      |
   +--------------+--------------------+-------------------------------+

   When a Recipient executes a Directive, it MUST report a success code.
   If the Directive reports failure, then the current Command Sequence
   MUST terminate.

7.10.1.  suit-directive-set-component-index

   Set Component Index defines the component to which successive
   directives and conditions will apply.  The supplied argument MUST be
   either a boolean or an unsigned integer index into the concatenation
   of suit-components and suit-dependency-components.  If the following



Moran, et al.          Expires September 10, 2020              [Page 46]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   directives apply to ALL components, then the boolean value "True" is
   used instead of an index.  True does not apply to dependency
   components.  If the following directives apply to NO components, then
   the boolean value "False" is used.  When suit-directive-set-
   dependency-index is used, suit-directive-set-component-index = False
   is implied.  When suit-directive-set-component-index is used, suit-
   directive-set-dependency-index = False is implied.

   The following CDDL describes the argument to suit-directive-set-
   component-index.

   SUIT_Directive_Set_Component_Index_Argument = uint/bool

7.10.2.  suit-directive-set-dependency-index

   Set Dependency Index defines the manifest to which successive
   directives and conditions will apply.  The supplied argument MUST be
   either a boolean or an unsigned integer index into the dependencies.
   If the following directives apply to ALL dependencies, then the
   boolean value "True" is used instead of an index.  If the following
   directives apply to NO dependencies, then the boolean value "False"
   is used.  When suit-directive-set-component-index is used, suit-
   directive-set-dependency-index = False is implied.  When suit-
   directive-set-dependency-index is used, suit-directive-set-component-
   index = False is implied.

   Typical operations that require suit-directive-set-dependency-index
   include setting a source URI, invoking "Fetch," or invoking "Process
   Dependency" for an individual dependency.

   The following CDDL describes the argument to suit-directive-set-
   dependency-index.

   SUIT_Directive_Set_Manifest_Index_Argument = uint/bool

7.10.3.  suit-directive-abort

   Unconditionally fail.  This operation is typically used in
   conjunction with suit-directive-try-each.

7.10.4.  suit-directive-run-sequence

   To enable conditional commands, and to allow several strictly ordered
   sequences to be executed out-of-order, suit-directive-run-sequence
   allows the manifest processor to execute its argument as a
   SUIT_Command_Sequence.  The argument must be wrapped in a bstr.





Moran, et al.          Expires September 10, 2020              [Page 47]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   When a sequence is executed, any failure of a condition causes
   immediate termination of the sequence.

   The following CDDL describes the SUIT_Run_Sequence argument.

 SUIT_Directive_Run_Sequence_Argument = bstr .cbor SUIT_Command_Sequence

   When suit-directive-run-sequence completes, it forwards the last
   status code that occurred in the sequence.  If the Soft Failure
   parameter is true, then suit-directive-run-sequence only fails when a
   directive in the argument sequence fails.

   SUIT_Parameter_Soft_Failure defaults to False when suit-directive-
   run-sequence begins.  Its value is discarded when suit-directive-run-
   sequence terminates.

7.10.5.  suit-directive-try-each

   This command runs several SUIT_Command_Sequence, one after another,
   in a strict order.  Use this command to implement a "try/catch-try/
   catch" sequence.  Manifest processors MAY implement this command.

   SUIT_Parameter_Soft_Failure is initialized to True at the beginning
   of each sequence.  If one sequence aborts due to a condition failure,
   the next is started.  If no sequence completes without condition
   failure, then suit-directive-try-each returns an error.  If a
   particular application calls for all sequences to fail and still
   continue, then an empty sequence (nil) can be added to the Try Each
   Argument.

   The following CDDL describes the SUIT_Try_Each argument.

   SUIT_Directive_Try_Each_Argument = [
       + bstr .cbor SUIT_Command_Sequence,
       nil / bstr .cbor SUIT_Command_Sequence
   ]

7.10.6.  suit-directive-process-dependency

   Execute the commands in the common section of the current dependency,
   followed by the commands in the equivalent section of the current
   dependency.  For example, if the current section is "fetch payload,"
   this will execute "common" in the current dependency, then "fetch
   payload" in the current dependency.  Once this is complete, the
   command following suit-directive-process-dependency will be
   processed.





Moran, et al.          Expires September 10, 2020              [Page 48]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   If the current dependency is False, this directive has no effect.  If
   the current dependency is True, then this directive applies to all
   dependencies.  If the current section is "common," this directive
   MUST have no effect.

   When SUIT_Process_Dependency completes, it forwards the last status
   code that occurred in the dependency.

   The argument to suit-directive-process-dependency is defined in the
   following CDDL.

   SUIT_Directive_Process_Dependency_Argument = nil

7.10.7.  suit-directive-set-parameters

   suit-directive-set-parameters allows the manifest to configure
   behavior of future directives by changing parameters that are read by
   those directives.  When dependencies are used, suit-directive-set-
   parameters also allows a manifest to modify the behavior of its
   dependencies.

   Available parameters are defined in Section 7.6.

   If a parameter is already set, suit-directive-set-parameters will
   skip setting the parameter to its argument.  This provides the core
   of the override mechanism, allowing dependent manifests to change the
   behavior of a manifest.

   The argument to suit-directive-set-parameters is defined in the
   following CDDL.

   SUIT_Directive_Set_Parameters_Argument = {+ SUIT_Parameters}

   N.B.: A directive code is reserved for an optimization: a way to set
   a parameter to the contents of another parameter, optionally with
   another component ID.

7.10.8.  suit-directive-override-parameters

   suit-directive-override-parameters replaces any listed parameters
   that are already set with the values that are provided in its
   argument.  This allows a manifest to prevent replacement of critical
   parameters.

   Available parameters are defined in Section 7.6.

   The argument to suit-directive-override-parameters is defined in the
   following CDDL.



Moran, et al.          Expires September 10, 2020              [Page 49]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   SUIT_Directive_Override_Parameters_Argument = {+ SUIT_Parameters}

7.10.9.  suit-directive-fetch

   suit-directive-fetch instructs the manifest processor to obtain one
   or more manifests or payloads, as specified by the manifest index and
   component index, respectively.

   suit-directive-fetch can target one or more manifests and one or more
   payloads. suit-directive-fetch retrieves each component and each
   manifest listed in component-index and manifest-index, respectively.
   If component-index or manifest-index is True, instead of an integer,
   then all current manifest components/manifests are fetched.  The
   current manifest's dependent-components are not automatically
   fetched.  In order to pre-fetch these, they MUST be specified in a
   component-index integer.

   suit-directive-fetch typically takes no arguments unless one is
   needed to modify fetch behavior.  If an argument is needed, it must
   be wrapped in a bstr.

   suit-directive-fetch reads the URI or URI List parameter to find the
   source of the fetch it performs.

   The behavior of suit-directive-fetch can be modified by setting one
   or more of SUIT_Parameter_Encryption_Info,
   SUIT_Parameter_Compression_Info, SUIT_Parameter_Unpack_Info.  These
   three parameters each activate and configure a processing step that
   can be applied to the data that is transferred during suit-directive-
   fetch.

   The argument to suit-directive-fetch is defined in the following
   CDDL.

   SUIT_Directive_Fetch_Argument = nil/bstr

7.10.10.  suit-directive-copy

   suit-directive-copy instructs the manifest processor to obtain one or
   more payloads, as specified by the component index. suit-directive-
   copy retrieves each component listed in component-index,
   respectively.  If component-index is True, instead of an integer,
   then all current manifest components are copied.  The current
   manifest's dependent-components are not automatically copied.  In
   order to copy these, they MUST be specified in a component-index
   integer.





Moran, et al.          Expires September 10, 2020              [Page 50]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   The behavior of suit-directive-copy can be modified by setting one or
   more of SUIT_Parameter_Encryption_Info,
   SUIT_Parameter_Compression_Info, SUIT_Parameter_Unpack_Info.  These
   three parameters each activate and configure a processing step that
   can be applied to the data that is transferred during suit-directive-
   copy.

   *N.B.* Fetch and Copy are very similar.  Merging them into one
   command may be appropriate.

   suit-directive-copy reads its source from
   SUIT_Parameter_Source_Component.

   The argument to suit-directive-copy is defined in the following CDDL.

   SUIT_Directive_Copy_Argument = nil

7.10.11.  suit-directive-swap

   suit-directive-swap instructs the manifest processor to move the
   source to the destination and the destination to the source
   simultaneously.  Swap has nearly identical semantics to suit-
   directive-copy except that suit-directive-swap replaces the source
   with the current contents of the destination in an application-
   defined way.  If SUIT_Parameter_Compression_Info or
   SUIT_Parameter_Encryption_Info are present, they must be handled in a
   symmetric way, so that the source is decompressed into the
   destination and the destination is compressed into the source.  The
   source is decrypted into the destination and the destination is
   encrypted into the source. suit-directive-swap is OPTIONAL to
   implement.

7.10.12.  suit-directive-run

   suit-directive-run directs the manifest processor to transfer
   execution to the current Component Index.  When this is invoked, the
   manifest processor MAY be unloaded and execution continues in the
   Component Index.  Arguments provided to Run are forwarded to the
   executable code located in Component Index, in an application-
   specific way.  For example, this could form the Linux Kernel Command
   Line if booting a Linux device.

   If the executable code at Component Index is constructed in such a
   way that it does not unload the manifest processor, then the manifest
   processor may resume execution after the executable completes.  This
   allows the manifest processor to invoke suitable helpers and to
   verify them with image conditions.




Moran, et al.          Expires September 10, 2020              [Page 51]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   The argument to suit-directive-run is defined in the following CDDL.

   SUIT_Directive_Run_Argument = nil/bstr

7.10.13.  suit-directive-wait

   suit-directive-wait directs the manifest processor to pause until a
   specified event occurs.  Some possible events include:

   1.  Authorization

   2.  External Power

   3.  Network availability

   4.  Other Device Firmware Version

   5.  Time

   6.  Time of Day

   7.  Day of Week

   The following CDDL defines the encoding of these events.



























Moran, et al.          Expires September 10, 2020              [Page 52]


Internet-Draft             SUIT CBOR Manifest                 March 2020


  SUIT_Wait_Events //= (suit-wait-event-authorization => int)
  SUIT_Wait_Events //= (suit-wait-event-power => int)
  SUIT_Wait_Events //= (suit-wait-event-network => int)
  SUIT_Wait_Events //= (suit-wait-event-other-device-version
      => SUIT_Wait_Event_Argument_Other_Device_Version)
  SUIT_Wait_Events //= (suit-wait-event-time => uint); Timestamp
  SUIT_Wait_Events //= (suit-wait-event-time-of-day
      => uint); Time of Day (seconds since 00:00:00)
  SUIT_Wait_Events //= (suit-wait-event-day-of-week
      => uint); Days since Sunday


  SUIT_Wait_Event_Argument_Authorization = int ; priority
  SUIT_Wait_Event_Argument_Power = int ; Power Level
  SUIT_Wait_Event_Argument_Network = int ; Network State
  SUIT_Wait_Event_Argument_Other_Device_Version = [
      other-device: bstr,
      other-device-version: [+int]
  ]
  SUIT_Wait_Event_Argument_Time = uint ; Timestamp
  SUIT_Wait_Event_Argument_Time_Of_Day = uint ; Time of Day
                                              ; (seconds since 00:00:00)
  SUIT_Wait_Event_Argument_Day_Of_Week = uint ; Days since Sunday


7.10.14.  SUIT_Directive CDDL

   The following CDDL describes SUIT_Directive:























Moran, et al.          Expires September 10, 2020              [Page 53]


Internet-Draft             SUIT CBOR Manifest                 March 2020


  SUIT_Directive //= (suit-directive-set-component-index,  uint/bool)
  SUIT_Directive //= (suit-directive-set-dependency-index, uint/bool)
  SUIT_Directive //= (suit-directive-run-sequence,
                      bstr .cbor SUIT_Command_Sequence)
  SUIT_Directive //= (suit-directive-try-each,
                      SUIT_Directive_Try_Each_Argument)
  SUIT_Directive //= (suit-directive-process-dependency,   nil)
  SUIT_Directive //= (suit-directive-set-parameters,
                      {+ SUIT_Parameters})
  SUIT_Directive //= (suit-directive-override-parameters,
                      {+ SUIT_Parameters})
  SUIT_Directive //= (suit-directive-fetch,                nil)
  SUIT_Directive //= (suit-directive-copy,                 nil)
  SUIT_Directive //= (suit-directive-run,                  nil)
  SUIT_Directive //= (suit-directive-wait,
                      { + SUIT_Wait_Events })

  SUIT_Directive_Try_Each_Argument = [
      + bstr .cbor SUIT_Command_Sequence,
      nil / bstr .cbor SUIT_Command_Sequence
  ]

  SUIT_Wait_Events //= (suit-wait-event-authorization => int)
  SUIT_Wait_Events //= (suit-wait-event-power => int)
  SUIT_Wait_Events //= (suit-wait-event-network => int)
  SUIT_Wait_Events //= (suit-wait-event-other-device-version
      => SUIT_Wait_Event_Argument_Other_Device_Version)
  SUIT_Wait_Events //= (suit-wait-event-time => uint); Timestamp
  SUIT_Wait_Events //= (suit-wait-event-time-of-day
      => uint); Time of Day (seconds since 00:00:00)
  SUIT_Wait_Events //= (suit-wait-event-day-of-week
      => uint); Days since Sunday


  SUIT_Wait_Event_Argument_Authorization = int ; priority
  SUIT_Wait_Event_Argument_Power = int ; Power Level
  SUIT_Wait_Event_Argument_Network = int ; Network State
  SUIT_Wait_Event_Argument_Other_Device_Version = [
      other-device: bstr,
      other-device-version: [+int]
  ]
  SUIT_Wait_Event_Argument_Time = uint ; Timestamp
  SUIT_Wait_Event_Argument_Time_Of_Day = uint ; Time of Day
                                              ; (seconds since 00:00:00)
  SUIT_Wait_Event_Argument_Day_Of_Week = uint ; Days since Sunday






Moran, et al.          Expires September 10, 2020              [Page 54]


Internet-Draft             SUIT CBOR Manifest                 March 2020


7.11.  SUIT_Text_Map

   The SUIT_Text_Map contains all text descriptions needed for this
   manifest.  The text section is typically severable, allowing
   manifests to be distributed without the text, since end-nodes do not
   require text.  The meaning of each field is described below.

   Each section MAY be present.  If present, each section MUST be as
   described.  Negative integer IDs are reserved for application-
   specific text values.

   +----+-----------------------+--------------------------------------+
   | ID | Name                  | Summary                              |
   +----+-----------------------+--------------------------------------+
   | 1  | manifest-description  | Free text description of the         |
   |    |                       | manifest                             |
   |    |                       |                                      |
   | 2  | update-description    | Free text description of the update  |
   |    |                       |                                      |
   | 3  | vendor-name           | Free text vendor name                |
   |    |                       |                                      |
   | 4  | model-name            | Free text model name                 |
   |    |                       |                                      |
   | 5  | vendor-domain         | The domain used to create the        |
   |    |                       | vendor-id (Section 7.9.9.1)          |
   |    |                       |                                      |
   | 6  | model-info            | The information used to create the   |
   |    |                       | class-id (Section 7.9.9.1)           |
   |    |                       |                                      |
   | 7  | component-description | Free text description of each        |
   |    |                       | component in the manifest            |
   |    |                       |                                      |
   | 8  | json-source           | The JSON-formatted document that was |
   |    |                       | used to create the manifest          |
   |    |                       |                                      |
   | 9  | yaml-source           | The yaml-formatted document that was |
   |    |                       | used to create the manifest          |
   |    |                       |                                      |
   | 10 | version-dependencies  | List of component versions required  |
   |    |                       | by the manifest                      |
   +----+-----------------------+--------------------------------------+

8.  Access Control Lists

   To manage permissions in the manifest, there are three models that
   can be used.





Moran, et al.          Expires September 10, 2020              [Page 55]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   First, the simplest model requires that all manifests are
   authenticated by a single trusted key.  This mode has the advantage
   that only a root manifest needs to be authenticated, since all of its
   dependencies have digests included in the root manifest.

   This simplest model can be extended by adding key delegation without
   much increase in complexity.

   A second model requires an ACL to be presented to the device,
   authenticated by a trusted party or stored on the device.  This ACL
   grants access rights for specific component IDs or component ID
   prefixes to the listed identities or identity groups.  Any identity
   may verify an image digest, but fetching into or fetching from a
   component ID requires approval from the ACL.

   A third model allows a device to provide even more fine-grained
   controls: The ACL lists the component ID or component ID prefix that
   an identity may use, and also lists the commands that the identity
   may use in combination with that component ID.

9.  SUIT digest container

   RFC 8152 [RFC8152] provides containers for signature, MAC, and
   encryption, but no basic digest container.  The container needed for
   a digest requires a type identifier and a container for the raw
   digest data.  Some forms of digest may require additional parameters.
   These can be added following the digest.  This structure is described
   by the following CDDL.

   The algorithms listed are sufficient for verifying integrity of
   Firmware Updates as of this writing, however this may change over
   time.



















Moran, et al.          Expires September 10, 2020              [Page 56]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   SUIT_Digest = [
    suit-digest-algorithm-id : $suit-digest-algorithm-ids,
    suit-digest-bytes : bytes,
    ? suit-digest-parameters : any
   ]

   digest-algorithm-ids /= algorithm-id-sha224
   digest-algorithm-ids /= algorithm-id-sha256
   digest-algorithm-ids /= algorithm-id-sha384
   digest-algorithm-ids /= algorithm-id-sha512
   digest-algorithm-ids /= algorithm-id-sha3-224
   digest-algorithm-ids /= algorithm-id-sha3-256
   digest-algorithm-ids /= algorithm-id-sha3-384
   digest-algorithm-ids /= algorithm-id-sha3-512

   algorithm-id-sha224 = 1
   algorithm-id-sha256 = 2
   algorithm-id-sha384 = 3
   algorithm-id-sha512 = 4
   algorithm-id-sha3-224 = 5
   algorithm-id-sha3-256 = 6
   algorithm-id-sha3-384 = 7
   algorithm-id-sha3-512 = 8

10.  Creating Conditional Sequences

   For some use cases, it is important to provide a sequence that can
   fail without terminating an update.  For example, a dual-image XIP
   MCU may require an update that can be placed at one of two offsets.
   This has two implications, first, the digest of each offset will be
   different.  Second, the image fetched for each offset will have a
   different URI.  Conditional sequences allow this to be resolved in a
   simple way.

   The following JSON representation of a manifest demonstrates how this
   would be represented.  It assumes that the bootloader and manifest
   processor take care of A/B switching and that the manifest is not
   aware of this distinction.

  {
      "structure-version" : 1,
      "sequence-number" : 7,
      "common" :{
          "components" : [
              [b'0']
          ],
          "common-sequence" : [
              {



Moran, et al.          Expires September 10, 2020              [Page 57]


Internet-Draft             SUIT CBOR Manifest                 March 2020


                  "directive-set-var" : {
                      "size": 32567
                  },
              },
              {
                  "try-each" : [
                      [
                          {"condition-component-offset" : "<offset A>"},
                          {
                              "directive-set-var": {
                                  "digest" : "<SHA256 A>"
                              }
                          }
                      ],
                      [
                          {"condition-component-offset" : "<offset B>"},
                          {
                              "directive-set-var": {
                                  "digest" : "<SHA256 B>"
                              }
                          }
                      ],
                      [{ "abort" : null }]
                  ]
              }
          ]
      }
      "fetch" : [
          {
              "try-each" : [
                  [
                      {"condition-component-offset" : "<offset A>"},
                      {
                          "directive-set-var": {
                              "uri" : "<URI A>"
                          }
                      }
                  ],
                  [
                      {"condition-component-offset" : "<offset B>"},
                      {
                          "directive-set-var": {
                              "uri" : "<URI B>"
                          }
                      }
                  ],
                  [{ "directive-abort" : null }]
              ]



Moran, et al.          Expires September 10, 2020              [Page 58]


Internet-Draft             SUIT CBOR Manifest                 March 2020


          },
          "fetch" : null
      ]
  }

11.  Full CDDL

   In order to create a valid SUIT Manifest document the structure of
   the corresponding CBOR message MUST adhere to the following CDDL data
   definition.

SUIT_Envelope = {
    suit-delegation            => bstr .cbor SUIT_Delegation
    suit-authentication-wrapper
        => bstr .cbor SUIT_Authentication_Wrapper / nil,
    $$SUIT_Manifest_Wrapped,
    * $$SUIT_Severed_Fields,
}

SUIT_Delegation = [ + [ + CWT ] ]

CWT = SUIT_Authentication_Block

SUIT_Authentication_Wrapper = [ + bstr .cbor SUIT_Authentication_Block ]

SUIT_Authentication_Block /= COSE_Mac_Tagged
SUIT_Authentication_Block /= COSE_Sign_Tagged
SUIT_Authentication_Block /= COSE_Mac0_Tagged
SUIT_Authentication_Block /= COSE_Sign1_Tagged

$$SUIT_Manifest_Wrapped //= (suit-manifest  => bstr .cbor SUIT_Manifest)
$$SUIT_Manifest_Wrapped //= (
    suit-manifest-encryption-info => bstr .cbor SUIT_Encryption_Wrapper,
    suit-manifest-encrypted       => bstr
)

SUIT_Encryption_Wrapper = COSE_Encrypt_Tagged / COSE_Encrypt0_Tagged

$$SUIT_Severed_Fields //= ( suit-dependency-resolution =>
    bstr .cbor SUIT_Command_Sequence)
$$SUIT_Severed_Fields //= (suit-payload-fetch =>
    bstr .cbor SUIT_Command_Sequence)
$$SUIT_Severed_Fields //= (suit-install =>
    bstr .cbor SUIT_Command_Sequence)
$$SUIT_Severed_Fields //= (suit-text =>
    bstr .cbor SUIT_Text_Map)
$$SUIT_Severed_Fields //= (suit-coswid =>
    bstr .cbor concise-software-identity)



Moran, et al.          Expires September 10, 2020              [Page 59]


Internet-Draft             SUIT CBOR Manifest                 March 2020


COSE_Mac_Tagged = any
COSE_Sign_Tagged = any
COSE_Mac0_Tagged = any
COSE_Sign1_Tagged = any
COSE_Encrypt_Tagged = any
COSE_Encrypt0_Tagged = any

SUIT_Digest = [
  suit-digest-algorithm-id : suit-digest-algorithm-ids,
  suit-digest-bytes : bstr,
  ? suit-digest-parameters : any
]

; Named Information Hash Algorithm Identifiers
suit-digest-algorithm-ids /= algorithm-id-sha224
suit-digest-algorithm-ids /= algorithm-id-sha256
suit-digest-algorithm-ids /= algorithm-id-sha384
suit-digest-algorithm-ids /= algorithm-id-sha512
suit-digest-algorithm-ids /= algorithm-id-sha3-224
suit-digest-algorithm-ids /= algorithm-id-sha3-256
suit-digest-algorithm-ids /= algorithm-id-sha3-384
suit-digest-algorithm-ids /= algorithm-id-sha3-512

algorithm-id-sha224 = 1
algorithm-id-sha256 = 2
algorithm-id-sha384 = 3
algorithm-id-sha512 = 4
algorithm-id-sha3-224 = 5
algorithm-id-sha3-256 = 6
algorithm-id-sha3-384 = 7
algorithm-id-sha3-512 = 8

SUIT_Manifest = {
    suit-manifest-version         => 1,
    suit-manifest-sequence-number => uint,
    suit-common                   => bstr .cbor SUIT_Common,
    ? suit-reference-uri          => #6.32(tstr),
    * $$SUIT_Severable_Command_Sequences,
    * $$SUIT_Command_Sequences,
    * $$SUIT_Protected_Elements,
}

$$SUIT_Severable_Command_Sequences //= (suit-dependency-resolution =>
    SUIT_Severable_Command_Sequence)
$$SUIT_Severable_Command_Sequences //= (suit-payload-fetch =>
    SUIT_Severable_Command_Sequence)
$$SUIT_Severable_Command_Sequences //= (suit-install =>
    SUIT_Severable_Command_Sequence)



Moran, et al.          Expires September 10, 2020              [Page 60]


Internet-Draft             SUIT CBOR Manifest                 March 2020


SUIT_Severable_Command_Sequence =
    SUIT_Digest / bstr .cbor SUIT_Command_Sequence

$$SUIT_Command_Sequences //= ( suit-validate =>
    bstr .cbor SUIT_Command_Sequence )
$$SUIT_Command_Sequences //= ( suit-load =>
    bstr .cbor SUIT_Command_Sequence )
$$SUIT_Command_Sequences //= ( suit-run =>
    bstr .cbor SUIT_Command_Sequence )

$$SUIT_Protected_Elements //= ( suit-text => SUIT_Digest )
$$SUIT_Protected_Elements //= ( suit-coswid => SUIT_Digest )

SUIT_Common = {
    ? suit-dependencies           => bstr .cbor SUIT_Dependencies,
    ? suit-components             => bstr .cbor SUIT_Components,
    ? suit-dependency-components
        => bstr .cbor SUIT_Component_References,
    ? suit-common-sequence        => bstr .cbor SUIT_Command_Sequence,
}

SUIT_Dependencies         = [ + SUIT_Dependency ]
SUIT_Components           = [ + SUIT_Component_Identifier ]
SUIT_Component_References = [ + SUIT_Component_Reference ]

concise-software-identity = any

SUIT_Dependency = {
    suit-dependency-digest => SUIT_Digest,
    suit-dependency-prefix => SUIT_Component_Identifier,
}

SUIT_Component_Identifier =  [* bstr]


SUIT_Component_Reference = {
    suit-component-identifier => SUIT_Component_Identifier,
    suit-component-dependency-index => uint
}

SUIT_Command_Sequence = [ + (
    SUIT_Condition // SUIT_Directive // SUIT_Command_Custom
) ]

SUIT_Command_Custom = (suit-command-custom, bstr/tstr/int/nil)
SUIT_Condition //= (suit-condition-vendor-identifier, nil)
SUIT_Condition //= (suit-condition-class-identifier,  nil)
SUIT_Condition //= (suit-condition-device-identifier, nil)



Moran, et al.          Expires September 10, 2020              [Page 61]


Internet-Draft             SUIT CBOR Manifest                 March 2020


SUIT_Condition //= (suit-condition-image-match,       nil)
SUIT_Condition //= (suit-condition-image-not-match,   nil)
SUIT_Condition //= (suit-condition-use-before,        nil)
SUIT_Condition //= (suit-condition-minimum-battery,   nil)
SUIT_Condition //= (suit-condition-update-authorized, nil)
SUIT_Condition //= (suit-condition-version,           nil)
SUIT_Condition //= (suit-condition-component-offset,  nil)

SUIT_Directive //= (suit-directive-set-component-index,  uint/bool)
SUIT_Directive //= (suit-directive-set-dependency-index, uint/bool)
SUIT_Directive //= (suit-directive-run-sequence,
    bstr .cbor SUIT_Command_Sequence)
SUIT_Directive //= (suit-directive-try-each,
    SUIT_Directive_Try_Each_Argument)
SUIT_Directive //= (suit-directive-process-dependency,   nil)
SUIT_Directive //= (suit-directive-set-parameters,
    {+ SUIT_Parameters})
SUIT_Directive //= (suit-directive-override-parameters,
    {+ SUIT_Parameters})
SUIT_Directive //= (suit-directive-fetch,                nil)
SUIT_Directive //= (suit-directive-copy,                 nil)
SUIT_Directive //= (suit-directive-swap,                 nil)
SUIT_Directive //= (suit-directive-run,                  nil)
SUIT_Directive //= (suit-directive-wait,                 nil)
SUIT_Directive //= (suit-directive-abort,                nil)

SUIT_Directive_Try_Each_Argument = [
    + bstr .cbor SUIT_Command_Sequence,
    nil / bstr .cbor SUIT_Command_Sequence
]

SUIT_Wait_Event = { + SUIT_Wait_Events }

SUIT_Wait_Events //= (suit-wait-event-authorization => int)
SUIT_Wait_Events //= (suit-wait-event-power => int)
SUIT_Wait_Events //= (suit-wait-event-network => int)
SUIT_Wait_Events //= (suit-wait-event-other-device-version
    => SUIT_Wait_Event_Argument_Other_Device_Version)
SUIT_Wait_Events //= (suit-wait-event-time => uint); Timestamp
SUIT_Wait_Events //= (suit-wait-event-time-of-day
    => uint); Time of Day (seconds since 00:00:00)
SUIT_Wait_Events //= (suit-wait-event-day-of-week
    => uint); Days since Sunday

SUIT_Wait_Event_Argument_Other_Device_Version = [
    other-device: bstr,
    other-device-version: [+int]
]



Moran, et al.          Expires September 10, 2020              [Page 62]


Internet-Draft             SUIT CBOR Manifest                 March 2020


SUIT_Parameters //= (suit-parameter-vendor-identifier => RFC4122_UUID)
SUIT_Parameters //= (suit-parameter-class-identifier => RFC4122_UUID)
SUIT_Parameters //= (suit-parameter-image-digest
    => bstr .cbor SUIT_Digest)
SUIT_Parameters //= (suit-parameter-image-size => uint)
SUIT_Parameters //= (suit-parameter-use-before => uint)
SUIT_Parameters //= (suit-parameter-component-offset => uint)

SUIT_Parameters //= (suit-parameter-encryption-info
    => bstr .cbor SUIT_Encryption_Info)
SUIT_Parameters //= (suit-parameter-compression-info
    => bstr .cbor SUIT_Compression_Info)
SUIT_Parameters //= (suit-parameter-unpack-info
    => bstr .cbor SUIT_Unpack_Info)

SUIT_Parameters //= (suit-parameter-uri => tstr)
SUIT_Parameters //= (suit-parameter-source-component => uint)
SUIT_Parameters //= (suit-parameter-run-args => bstr)

SUIT_Parameters //= (suit-parameter-device-identifier => RFC4122_UUID)
SUIT_Parameters //= (suit-parameter-minimum-battery => uint)
SUIT_Parameters //= (suit-parameter-update-priority => uint)
SUIT_Parameters //= (suit-parameter-version =>
    SUIT_Parameter_Version_Match)
SUIT_Parameters //= (suit-parameter-wait-info =>
    bstr .cbor SUIT_Wait_Event)

SUIT_Parameters //= (suit-parameter-custom => int/bool/tstr/bstr)

SUIT_Parameters //= (suit-parameter-strict-order => bool)
SUIT_Parameters //= (suit-parameter-soft-failure => bool)

RFC4122_UUID = bstr .size 16

SUIT_Parameter_Version_Match = [
    suit-condition-version-comparison-type:
        SUIT_Condition_Version_Comparison_Types,
    suit-condition-version-comparison-value:
        SUIT_Condition_Version_Comparison_Value
]
SUIT_Condition_Version_Comparison_Types /=
    suit-condition-version-comparison-greater
SUIT_Condition_Version_Comparison_Types /=
    suit-condition-version-comparison-greater-equal
SUIT_Condition_Version_Comparison_Types /=
    suit-condition-version-comparison-equal
SUIT_Condition_Version_Comparison_Types /=
    suit-condition-version-comparison-lesser-equal



Moran, et al.          Expires September 10, 2020              [Page 63]


Internet-Draft             SUIT CBOR Manifest                 March 2020


SUIT_Condition_Version_Comparison_Types /=
    suit-condition-version-comparison-lesser

suit-condition-version-comparison-greater = 1
suit-condition-version-comparison-greater-equal = 2
suit-condition-version-comparison-equal = 3
suit-condition-version-comparison-lesser-equal = 4
suit-condition-version-comparison-lesser = 5

SUIT_Condition_Version_Comparison_Value = [+int]

SUIT_Encryption_Info = COSE_Encrypt_Tagged/COSE_Encrypt0_Tagged
SUIT_Compression_Info = {
    suit-compression-algorithm => SUIT_Compression_Algorithms,
    ? suit-compression-parameters => bstr
}

SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_gzip
SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_bzip2
SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_deflate
SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_lz4
SUIT_Compression_Algorithms /= SUIT_Compression_Algorithm_lzma

SUIT_Compression_Algorithm_gzip = 1
SUIT_Compression_Algorithm_bzip2 = 2
SUIT_Compression_Algorithm_deflate = 3
SUIT_Compression_Algorithm_lz4 = 4
SUIT_Compression_Algorithm_lzma = 7

SUIT_Unpack_Info = {
    suit-unpack-algorithm => SUIT_Unpack_Algorithms,
    ? suit-unpack-parameters => bstr
}

SUIT_Unpack_Algorithms /= SUIT_Unpack_Algorithm_Delta
SUIT_Unpack_Algorithms /= SUIT_Unpack_Algorithm_Hex
SUIT_Unpack_Algorithms /= SUIT_Unpack_Algorithm_Elf

SUIT_Unpack_Algorithm_Delta = 1
SUIT_Unpack_Algorithm_Hex = 2
SUIT_Unpack_Algorithm_Elf = 3

SUIT_Text_Map = {SUIT_Text_Keys => tstr}

SUIT_Text_Keys /= suit-text-manifest-description
SUIT_Text_Keys /= suit-text-update-description
SUIT_Text_Keys /= suit-text-vendor-name
SUIT_Text_Keys /= suit-text-model-name



Moran, et al.          Expires September 10, 2020              [Page 64]


Internet-Draft             SUIT CBOR Manifest                 March 2020


SUIT_Text_Keys /= suit-text-vendor-domain
SUIT_Text_Keys /= suit-text-model-info
SUIT_Text_Keys /= suit-text-component-description
SUIT_Text_Keys /= suit-text-manifest-json-source
SUIT_Text_Keys /= suit-text-manifest-yaml-source
SUIT_Text_Keys /= suit-text-version-dependencies

suit-delegation = 1
suit-authentication-wrapper = 2
suit-manifest = 3

suit-manifest-encryption-info = 4
suit-manifest-encrypted       = 5

suit-manifest-version = 1
suit-manifest-sequence-number = 2
suit-common = 3
suit-reference-uri = 4
suit-dependency-resolution = 7
suit-payload-fetch = 8
suit-install = 9
suit-validate = 10
suit-load = 11
suit-run = 12
suit-text = 13
suit-coswid = 14

suit-dependencies = 1
suit-components = 2
suit-dependency-components = 3
suit-common-sequence = 4

suit-dependency-digest = 1
suit-dependency-prefix = 2

suit-component-identifier = 1
suit-component-dependency-index = 2

suit-command-custom = nint

suit-condition-vendor-identifier = 1
suit-condition-class-identifier  = 2
suit-condition-image-match       = 3
suit-condition-use-before        = 4
suit-condition-component-offset  = 5

suit-condition-device-identifier        = 24
suit-condition-image-not-match          = 25



Moran, et al.          Expires September 10, 2020              [Page 65]


Internet-Draft             SUIT CBOR Manifest                 March 2020


suit-condition-minimum-battery          = 26
suit-condition-update-authorized        = 27
suit-condition-version                  = 28

suit-directive-set-component-index      = 12
suit-directive-set-dependency-index     = 13
suit-directive-abort                    = 14
suit-directive-try-each                 = 15
;suit-directive-do-each                  = 16 ; TBD
;suit-directive-map-filter               = 17 ; TBD
suit-directive-process-dependency       = 18
suit-directive-set-parameters           = 19
suit-directive-override-parameters      = 20
suit-directive-fetch                    = 21
suit-directive-copy                     = 22
suit-directive-run                      = 23

suit-directive-wait                     = 29
suit-directive-run-sequence             = 30
suit-directive-swap                     = 32

suit-wait-event-authorization = 1
suit-wait-event-power = 2
suit-wait-event-network = 3
suit-wait-event-other-device-version = 4
suit-wait-event-time = 5
suit-wait-event-time-of-day = 6
suit-wait-event-day-of-week = 7

suit-parameter-vendor-identifier = 1
suit-parameter-class-identifier  = 2
suit-parameter-image-digest      = 3
suit-parameter-use-before        = 4
suit-parameter-component-offset  = 5

suit-parameter-strict-order      = 12
suit-parameter-soft-failure      = 13
suit-parameter-image-size        = 14

suit-parameter-encryption-info   = 18
suit-parameter-compression-info  = 19
suit-parameter-unpack-info       = 20
suit-parameter-uri               = 21
suit-parameter-source-component  = 22
suit-parameter-run-args          = 23

suit-parameter-device-identifier = 24
suit-parameter-minimum-battery   = 26



Moran, et al.          Expires September 10, 2020              [Page 66]


Internet-Draft             SUIT CBOR Manifest                 March 2020


suit-parameter-update-priority   = 27
suit-parameter-version           = 28
suit-parameter-wait-info         = 29

suit-parameter-custom = nint

suit-compression-algorithm = 1
suit-compression-parameters = 2

suit-unpack-algorithm  = 1
suit-unpack-parameters = 2

suit-text-manifest-description  = 1
suit-text-update-description    = 2
suit-text-vendor-name           = 3
suit-text-model-name            = 4
suit-text-vendor-domain         = 5
suit-text-model-info            = 6
suit-text-component-description = 7
suit-text-manifest-json-source  = 8
suit-text-manifest-yaml-source  = 9
suit-text-version-dependencies  = 10

12.  Examples

   The following examples demonstrate a small subset of the
   functionality of the manifest.  However, despite this, even a simple
   manifest processor can execute most of these manifests.

   The examples are signed using the following ECDSA secp256r1 key:

   -----BEGIN PRIVATE KEY-----
   MIGHAgEAMBMGByqGSM49AgEGCCqGSM49AwEHBG0wawIBAQQgApZYjZCUGLM50VBC
   CjYStX+09jGmnyJPrpDLTz/hiXOhRANCAASEloEarguqq9JhVxie7NomvqqL8Rtv
   P+bitWWchdvArTsfKktsCYExwKNtrNHXi9OB3N+wnAUtszmR23M4tKiW
   -----END PRIVATE KEY-----

   The corresponding public key can be used to verify these examples:

   -----BEGIN PUBLIC KEY-----
   MFkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDQgAEhJaBGq4LqqvSYVcYnuzaJr6qi/Eb
   bz/m4rVlnIXbwK07HypLbAmBMcCjbazR14vTgdzfsJwFLbM5kdtzOLSolg==
   -----END PUBLIC KEY-----

   Each example uses SHA256 as the digest function.






Moran, et al.          Expires September 10, 2020              [Page 67]


Internet-Draft             SUIT CBOR Manifest                 March 2020


12.1.  Example 0: Secure Boot

   Secure boot and compatibility check.

  {
      / authentication-wrapper / 2:h'81d28443a10126a058248202582064d8094
  da3ef71c5971b7b84e7f4be1f56452c32fdde7bc1c70889112f1d5d9958407d637397e
  12abdd41bc026a8e8a22f0f902a5b972e7786d570a37ac43c370b64a6946b0311f059c
  a01d40f74d88d6fd7193baa36f5cf20aa57c46a0411a6b704' / [
          18([
                  / protected / h'a10126' / {
                      / alg / 1:-7 / ES256 /,
                  } /,
                  / unprotected / {
                  },
                  / payload / h'8202582064d8094da3ef71c5971b7b84e7f4be1f
  56452c32fdde7bc1c70889112f1d5d99' / [
                      / algorithm-id / 2 / sha256 /,
                      / digest-bytes /
  h'64d8094da3ef71c5971b7b84e7f4be1f56452c32fdde7bc1c70889112f1d5d99'
                  ] /,
                  / signature / h'7d637397e12abdd41bc026a8e8a22f0f902a5b
  972e7786d570a37ac43c370b64a6946b0311f059ca01d40f74d88d6fd7193baa36f5cf
  20aa57c46a0411a6b704'
              ])
      ] /,
      / manifest / 3:h'a50101020103585ea20244818141000458548614a40150fa6
  b4a53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab4503820
  2582000112233445566778899aabbccddeeff0123456789abcdeffedcba98765432100
  e1987d001f602f60a438203f60c438217f6' / {
          / manifest-version / 1:1,
          / manifest-sequence-number / 2:1,
          / common / 3:h'a20244818141000458548614a40150fa6b4a53d5ad5fdfb
  e9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab450382025820001122334
  45566778899aabbccddeeff0123456789abcdeffedcba98765432100e1987d001f602f
  6' / {
              / components / 2:h'81814100' / [
                  [h'00']
              ] /,
              / common-sequence / 4:h'8614a40150fa6b4a53d5ad5fdfbe9de663
  e4d41ffe02501492af1425695e48bf429b2d51f2ab4503820258200011223344556677
  8899aabbccddeeff0123456789abcdeffedcba98765432100e1987d001f602f6' / [
                  / directive-override-parameters / 20,{
                      / vendor-id /
  1:h'fa6b4a53d5ad5fdfbe9de663e4d41ffe' / fa6b4a53-d5ad-5fdf-
  be9d-e663e4d41ffe /,
                      / class-id / 2:h'1492af1425695e48bf429b2d51f2ab45'
  / 1492af14-2569-5e48-bf42-9b2d51f2ab45 /,



Moran, et al.          Expires September 10, 2020              [Page 68]


Internet-Draft             SUIT CBOR Manifest                 March 2020


                      / image-digest / 3:[
                          / algorithm-id / 2 / sha256 /,
                          / digest-bytes /
  h'00112233445566778899aabbccddeeff0123456789abcdeffedcba9876543210'
                      ],
                      / image-size / 14:34768,
                  } ,
                  / condition-vendor-identifier / 1,F6 / nil / ,
                  / condition-class-identifier / 2,F6 / nil /
              ] /,
          } /,
          / validate / 10:h'8203f6' / [
              / condition-image-match / 3,F6 / nil /
          ] /,
          / run / 12:h'8217f6' / [
              / directive-run / 23,F6 / nil /
          ] /,
      } /,
  }

   Total size of manifest without COSE authentication object: 116

   Manifest:

   a1035870a50101020103585ea20244818141000458548614a40150fa6b4a
   53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab
   45038202582000112233445566778899aabbccddeeff0123456789abcdef
   fedcba98765432100e1987d001f602f60a438203f60c438217f6

   Total size of manifest with COSE authentication object: 231

   Manifest with COSE authentication object:

   a202587081d28443a10126a058248202582064d8094da3ef71c5971b7b84
   e7f4be1f56452c32fdde7bc1c70889112f1d5d9958407d637397e12abdd4
   1bc026a8e8a22f0f902a5b972e7786d570a37ac43c370b64a6946b0311f0
   59ca01d40f74d88d6fd7193baa36f5cf20aa57c46a0411a6b704035870a5
   0101020103585ea20244818141000458548614a40150fa6b4a53d5ad5fdf
   be9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab4503820258
   2000112233445566778899aabbccddeeff0123456789abcdeffedcba9876
   5432100e1987d001f602f60a438203f60c438217f6

12.2.  Example 1: Simultaneous Download and Installation of Payload

   Simultaneous download and installation of payload.

  {
      / authentication-wrapper / 2:h'81d28443a10126a0582482025820666b83f



Moran, et al.          Expires September 10, 2020              [Page 69]


Internet-Draft             SUIT CBOR Manifest                 March 2020


  f51628190387170489535aa9441656d8a24401de6458595c42cb0165d58405cb310acb
  34f7ebb42acfffce430dbda94faa412900ce8e76650445e2c37e4cc132d8bb5f30ecf5
  f8130270bbf8d159f6d36e1cdf97b64229910fdb447538af1' / [
          18([
                  / protected / h'a10126' / {
                      / alg / 1:-7 / ES256 /,
                  } /,
                  / unprotected / {
                  },
                  / payload / h'82025820666b83ff51628190387170489535aa94
  41656d8a24401de6458595c42cb0165d' / [
                      / algorithm-id / 2 / sha256 /,
                      / digest-bytes /
  h'666b83ff51628190387170489535aa9441656d8a24401de6458595c42cb0165d'
                  ] /,
                  / signature / h'5cb310acb34f7ebb42acfffce430dbda94faa4
  12900ce8e76650445e2c37e4cc132d8bb5f30ecf5f8130270bbf8d159f6d36e1cdf97b
  64229910fdb447538af1'
              ])
      ] /,
      / manifest / 3:h'a50101020203585ea20244818141000458548614a40150fa6
  b4a53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab4503820
  2582000112233445566778899aabbccddeeff0123456789abcdeffedcba98765432100
  e1987d001f602f60958258613a115781b687474703a2f2f6578616d706c652e636f6d2
  f66696c652e62696e15f603f60a438203f6' / {
          / manifest-version / 1:1,
          / manifest-sequence-number / 2:2,
          / common / 3:h'a20244818141000458548614a40150fa6b4a53d5ad5fdfb
  e9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab450382025820001122334
  45566778899aabbccddeeff0123456789abcdeffedcba98765432100e1987d001f602f
  6' / {
              / components / 2:h'81814100' / [
                  [h'00']
              ] /,
              / common-sequence / 4:h'8614a40150fa6b4a53d5ad5fdfbe9de663
  e4d41ffe02501492af1425695e48bf429b2d51f2ab4503820258200011223344556677
  8899aabbccddeeff0123456789abcdeffedcba98765432100e1987d001f602f6' / [
                  / directive-override-parameters / 20,{
                      / vendor-id /
  1:h'fa6b4a53d5ad5fdfbe9de663e4d41ffe' / fa6b4a53-d5ad-5fdf-
  be9d-e663e4d41ffe /,
                      / class-id / 2:h'1492af1425695e48bf429b2d51f2ab45'
  / 1492af14-2569-5e48-bf42-9b2d51f2ab45 /,
                      / image-digest / 3:[
                          / algorithm-id / 2 / sha256 /,
                          / digest-bytes /
  h'00112233445566778899aabbccddeeff0123456789abcdeffedcba9876543210'
                      ],



Moran, et al.          Expires September 10, 2020              [Page 70]


Internet-Draft             SUIT CBOR Manifest                 March 2020


                      / image-size / 14:34768,
                  } ,
                  / condition-vendor-identifier / 1,F6 / nil / ,
                  / condition-class-identifier / 2,F6 / nil /
              ] /,
          } /,
          / install / 9:h'8613a115781b687474703a2f2f6578616d706c652e636f
  6d2f66696c652e62696e15f603f6' / [
              / directive-set-parameters / 19,{
                  / uri / 21:'http://example.com/file.bin',
              } ,
              / directive-fetch / 21,F6 / nil / ,
              / condition-image-match / 3,F6 / nil /
          ] /,
          / validate / 10:h'8203f6' / [
              / condition-image-match / 3,F6 / nil /
          ] /,
      } /,
  }

   Total size of manifest without COSE authentication object: 151

   Manifest:

   a1035893a50101020203585ea20244818141000458548614a40150fa6b4a
   53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab
   45038202582000112233445566778899aabbccddeeff0123456789abcdef
   fedcba98765432100e1987d001f602f60958258613a115781b687474703a
   2f2f6578616d706c652e636f6d2f66696c652e62696e15f603f60a438203
   f6

   Total size of manifest with COSE authentication object: 266

   Manifest with COSE authentication object:

   a202587081d28443a10126a0582482025820666b83ff5162819038717048
   9535aa9441656d8a24401de6458595c42cb0165d58405cb310acb34f7ebb
   42acfffce430dbda94faa412900ce8e76650445e2c37e4cc132d8bb5f30e
   cf5f8130270bbf8d159f6d36e1cdf97b64229910fdb447538af1035893a5
   0101020203585ea20244818141000458548614a40150fa6b4a53d5ad5fdf
   be9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab4503820258
   2000112233445566778899aabbccddeeff0123456789abcdeffedcba9876
   5432100e1987d001f602f60958258613a115781b687474703a2f2f657861
   6d706c652e636f6d2f66696c652e62696e15f603f60a438203f6







Moran, et al.          Expires September 10, 2020              [Page 71]


Internet-Draft             SUIT CBOR Manifest                 March 2020


12.3.  Example 2: Simultaneous Download, Installation, and Secure Boot

   Compatibility test, simultaneous download and installation, and
   secure boot.

  {
      / authentication-wrapper / 2:h'81d28443a10126a058248202582038df852
  c98928fae9694fce5b6b51addd631bfde473eceb20c8b929ae6ec2d6c584050bba3dd9
  b0ad6da91265cff1ec69c3a9e2e42ffd97e780e37c78ac7889140620439874108ec527
  1f3325988f2774f17339fcd61a5c08a3d15fb7fcdeef9294e' / [
          18([
                  / protected / h'a10126' / {
                      / alg / 1:-7 / ES256 /,
                  } /,
                  / unprotected / {
                  },
                  / payload / h'8202582038df852c98928fae9694fce5b6b51add
  d631bfde473eceb20c8b929ae6ec2d6c' / [
                      / algorithm-id / 2 / sha256 /,
                      / digest-bytes /
  h'38df852c98928fae9694fce5b6b51addd631bfde473eceb20c8b929ae6ec2d6c'
                  ] /,
                  / signature / h'50bba3dd9b0ad6da91265cff1ec69c3a9e2e42
  ffd97e780e37c78ac7889140620439874108ec5271f3325988f2774f17339fcd61a5c0
  8a3d15fb7fcdeef9294e'
              ])
      ] /,
      / manifest / 3:h'a60101020303585ea20244818141000458548614a40150fa6
  b4a53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab4503820
  2582000112233445566778899aabbccddeeff0123456789abcdeffedcba98765432100
  e1987d001f602f60958258613a115781b687474703a2f2f6578616d706c652e636f6d2
  f66696c652e62696e15f603f60a438203f60c438217f6' / {
          / manifest-version / 1:1,
          / manifest-sequence-number / 2:3,
          / common / 3:h'a20244818141000458548614a40150fa6b4a53d5ad5fdfb
  e9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab450382025820001122334
  45566778899aabbccddeeff0123456789abcdeffedcba98765432100e1987d001f602f
  6' / {
              / components / 2:h'81814100' / [
                  [h'00']
              ] /,
              / common-sequence / 4:h'8614a40150fa6b4a53d5ad5fdfbe9de663
  e4d41ffe02501492af1425695e48bf429b2d51f2ab4503820258200011223344556677
  8899aabbccddeeff0123456789abcdeffedcba98765432100e1987d001f602f6' / [
                  / directive-override-parameters / 20,{
                      / vendor-id /
  1:h'fa6b4a53d5ad5fdfbe9de663e4d41ffe' / fa6b4a53-d5ad-5fdf-
  be9d-e663e4d41ffe /,



Moran, et al.          Expires September 10, 2020              [Page 72]


Internet-Draft             SUIT CBOR Manifest                 March 2020


                      / class-id / 2:h'1492af1425695e48bf429b2d51f2ab45'
  / 1492af14-2569-5e48-bf42-9b2d51f2ab45 /,
                      / image-digest / 3:[
                          / algorithm-id / 2 / sha256 /,
                          / digest-bytes /
  h'00112233445566778899aabbccddeeff0123456789abcdeffedcba9876543210'
                      ],
                      / image-size / 14:34768,
                  } ,
                  / condition-vendor-identifier / 1,F6 / nil / ,
                  / condition-class-identifier / 2,F6 / nil /
              ] /,
          } /,
          / install / 9:h'8613a115781b687474703a2f2f6578616d706c652e636f
  6d2f66696c652e62696e15f603f6' / [
              / directive-set-parameters / 19,{
                  / uri / 21:'http://example.com/file.bin',
              } ,
              / directive-fetch / 21,F6 / nil / ,
              / condition-image-match / 3,F6 / nil /
          ] /,
          / validate / 10:h'8203f6' / [
              / condition-image-match / 3,F6 / nil /
          ] /,
          / run / 12:h'8217f6' / [
              / directive-run / 23,F6 / nil /
          ] /,
      } /,
  }

   Total size of manifest without COSE authentication object: 156

   Manifest:

   a1035898a60101020303585ea20244818141000458548614a40150fa6b4a
   53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab
   45038202582000112233445566778899aabbccddeeff0123456789abcdef
   fedcba98765432100e1987d001f602f60958258613a115781b687474703a
   2f2f6578616d706c652e636f6d2f66696c652e62696e15f603f60a438203
   f60c438217f6

   Total size of manifest with COSE authentication object: 271

   Manifest with COSE authentication object:







Moran, et al.          Expires September 10, 2020              [Page 73]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   a202587081d28443a10126a058248202582038df852c98928fae9694fce5
   b6b51addd631bfde473eceb20c8b929ae6ec2d6c584050bba3dd9b0ad6da
   91265cff1ec69c3a9e2e42ffd97e780e37c78ac7889140620439874108ec
   5271f3325988f2774f17339fcd61a5c08a3d15fb7fcdeef9294e035898a6
   0101020303585ea20244818141000458548614a40150fa6b4a53d5ad5fdf
   be9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab4503820258
   2000112233445566778899aabbccddeeff0123456789abcdeffedcba9876
   5432100e1987d001f602f60958258613a115781b687474703a2f2f657861
   6d706c652e636f6d2f66696c652e62696e15f603f60a438203f60c438217
   f6

12.4.  Example 3: Load from External Storage

   Compatibility test, simultaneous download and installation, load from
   external storage, and secure boot.

  {
      / authentication-wrapper / 2:h'81d28443a10126a05824820258208ae1d4d
  1846e82975dd5d7555ef0c3836e7e653a8bb1214466457781c0d2f2aa58401ef2d0ca6
  aabf259feb880a1a4deb4e345cda314b2facf9983766da3744af825b3f98c74afdfa85
  aed406b10315e0cc6c44ee19321681c69f911bc90bf8d22c0' / [
          18([
                  / protected / h'a10126' / {
                      / alg / 1:-7 / ES256 /,
                  } /,
                  / unprotected / {
                  },
                  / payload / h'820258208ae1d4d1846e82975dd5d7555ef0c383
  6e7e653a8bb1214466457781c0d2f2aa' / [
                      / algorithm-id / 2 / sha256 /,
                      / digest-bytes /
  h'8ae1d4d1846e82975dd5d7555ef0c3836e7e653a8bb1214466457781c0d2f2aa'
                  ] /,
                  / signature / h'1ef2d0ca6aabf259feb880a1a4deb4e345cda3
  14b2facf9983766da3744af825b3f98c74afdfa85aed406b10315e0cc6c44ee1932168
  1c69f911bc90bf8d22c0'
              ])
      ] /,
      / manifest / 3:h'a701010204035863a2024782814100814101045856880c001
  4a40150fa6b4a53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f
  2ab45038202582000112233445566778899aabbccddeeff0123456789abcdeffedcba9
  8765432100e1987d001f602f6095827880c0013a115781b687474703a2f2f6578616d7
  06c652e636f6d2f66696c652e62696e15f603f60a45840c0003f60b4b880c0113a1160
  016f603f60c45840c0117f6' / {
          / manifest-version / 1:1,
          / manifest-sequence-number / 2:4,
          / common / 3:h'a2024782814100814101045856880c0014a40150fa6b4a5
  3d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab45038202582



Moran, et al.          Expires September 10, 2020              [Page 74]


Internet-Draft             SUIT CBOR Manifest                 March 2020


  000112233445566778899aabbccddeeff0123456789abcdeffedcba98765432100e198
  7d001f602f6' / {
              / components / 2:h'82814100814101' / [
                  [h'00'] ,
                  [h'01']
              ] /,
              / common-sequence / 4:h'880c0014a40150fa6b4a53d5ad5fdfbe9d
  e663e4d41ffe02501492af1425695e48bf429b2d51f2ab450382025820001122334455
  66778899aabbccddeeff0123456789abcdeffedcba98765432100e1987d001f602f6'
  / [
                  / directive-set-component-index / 12,0 ,
                  / directive-override-parameters / 20,{
                      / vendor-id /
  1:h'fa6b4a53d5ad5fdfbe9de663e4d41ffe' / fa6b4a53-d5ad-5fdf-
  be9d-e663e4d41ffe /,
                      / class-id / 2:h'1492af1425695e48bf429b2d51f2ab45'
  / 1492af14-2569-5e48-bf42-9b2d51f2ab45 /,
                      / image-digest / 3:[
                          / algorithm-id / 2 / sha256 /,
                          / digest-bytes /
  h'00112233445566778899aabbccddeeff0123456789abcdeffedcba9876543210'
                      ],
                      / image-size / 14:34768,
                  } ,
                  / condition-vendor-identifier / 1,F6 / nil / ,
                  / condition-class-identifier / 2,F6 / nil /
              ] /,
          } /,
          / install / 9:h'880c0013a115781b687474703a2f2f6578616d706c652e
  636f6d2f66696c652e62696e15f603f6' / [
              / directive-set-component-index / 12,0 ,
              / directive-set-parameters / 19,{
                  / uri / 21:'http://example.com/file.bin',
              } ,
              / directive-fetch / 21,F6 / nil / ,
              / condition-image-match / 3,F6 / nil /
          ] /,
          / validate / 10:h'840c0003f6' / [
              / directive-set-component-index / 12,0 ,
              / condition-image-match / 3,F6 / nil /
          ] /,
          / load / 11:h'880c0113a1160016f603f6' / [
              / directive-set-component-index / 12,1 ,
              / directive-set-parameters / 19,{
                  / source-component / 22:0 / [h'00'] /,
              } ,
              / directive-copy / 22,F6 / nil / ,
              / condition-image-match / 3,F6 / nil /



Moran, et al.          Expires September 10, 2020              [Page 75]


Internet-Draft             SUIT CBOR Manifest                 March 2020


          ] /,
          / run / 12:h'840c0117f6' / [
              / directive-set-component-index / 12,1 ,
              / directive-run / 23,F6 / nil /
          ] /,
      } /,
  }

   Total size of manifest without COSE authentication object: 180

   Manifest:

   a10358b0a701010204035863a2024782814100814101045856880c0014a4
   0150fa6b4a53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf42
   9b2d51f2ab45038202582000112233445566778899aabbccddeeff012345
   6789abcdeffedcba98765432100e1987d001f602f6095827880c0013a115
   781b687474703a2f2f6578616d706c652e636f6d2f66696c652e62696e15
   f603f60a45840c0003f60b4b880c0113a1160016f603f60c45840c0117f6

   Total size of manifest with COSE authentication object: 295

   Manifest with COSE authentication object:

   a202587081d28443a10126a05824820258208ae1d4d1846e82975dd5d755
   5ef0c3836e7e653a8bb1214466457781c0d2f2aa58401ef2d0ca6aabf259
   feb880a1a4deb4e345cda314b2facf9983766da3744af825b3f98c74afdf
   a85aed406b10315e0cc6c44ee19321681c69f911bc90bf8d22c00358b0a7
   01010204035863a2024782814100814101045856880c0014a40150fa6b4a
   53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab
   45038202582000112233445566778899aabbccddeeff0123456789abcdef
   fedcba98765432100e1987d001f602f6095827880c0013a115781b687474
   703a2f2f6578616d706c652e636f6d2f66696c652e62696e15f603f60a45
   840c0003f60b4b880c0113a1160016f603f60c45840c0117f6

12.5.  Example 4: Load and Decompress from External Storage

   Compatibility test, simultaneous download and installation, load and
   decompress from external storage, and secure boot.

  {
      / authentication-wrapper / 2:h'81d28443a10126a0582482025820310798d
  3d8276a740505d1f017972e281d6d26c9967a658879ae6d07e6a238a958404d48f0059
  918c261bc1636b467b2b455801c4d211758a42e82a8f8fc245f21857d7c0e78f1b6d6a
  8ab1f0c9e147043066c0af53c1563070d4934faeec21bac55' / [
          18([
                  / protected / h'a10126' / {
                      / alg / 1:-7 / ES256 /,
                  } /,



Moran, et al.          Expires September 10, 2020              [Page 76]


Internet-Draft             SUIT CBOR Manifest                 March 2020


                  / unprotected / {
                  },
                  / payload / h'82025820310798d3d8276a740505d1f017972e28
  1d6d26c9967a658879ae6d07e6a238a9' / [
                      / algorithm-id / 2 / sha256 /,
                      / digest-bytes /
  h'310798d3d8276a740505d1f017972e281d6d26c9967a658879ae6d07e6a238a9'
                  ] /,
                  / signature / h'4d48f0059918c261bc1636b467b2b455801c4d
  211758a42e82a8f8fc245f21857d7c0e78f1b6d6a8ab1f0c9e147043066c0af53c1563
  070d4934faeec21bac55'
              ])
      ] /,
      / manifest / 3:h'a701010205035863a2024782814100814101045856880c001
  4a40150fa6b4a53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f
  2ab45038202582000112233445566778899aabbccddeeff0123456789abcdeffedcba9
  8765432100e1987d001f602f6095827880c0013a115781b687474703a2f2f6578616d7
  06c652e636f6d2f66696c652e62696e15f603f60a45840c0003f60b4d880c0113a2130
  1160016f603f60c45840c0117f6' / {
          / manifest-version / 1:1,
          / manifest-sequence-number / 2:5,
          / common / 3:h'a2024782814100814101045856880c0014a40150fa6b4a5
  3d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab45038202582
  000112233445566778899aabbccddeeff0123456789abcdeffedcba98765432100e198
  7d001f602f6' / {
              / components / 2:h'82814100814101' / [
                  [h'00'] ,
                  [h'01']
              ] /,
              / common-sequence / 4:h'880c0014a40150fa6b4a53d5ad5fdfbe9d
  e663e4d41ffe02501492af1425695e48bf429b2d51f2ab450382025820001122334455
  66778899aabbccddeeff0123456789abcdeffedcba98765432100e1987d001f602f6'
  / [
                  / directive-set-component-index / 12,0 ,
                  / directive-override-parameters / 20,{
                      / vendor-id /
  1:h'fa6b4a53d5ad5fdfbe9de663e4d41ffe' / fa6b4a53-d5ad-5fdf-
  be9d-e663e4d41ffe /,
                      / class-id / 2:h'1492af1425695e48bf429b2d51f2ab45'
  / 1492af14-2569-5e48-bf42-9b2d51f2ab45 /,
                      / image-digest / 3:[
                          / algorithm-id / 2 / sha256 /,
                          / digest-bytes /
  h'00112233445566778899aabbccddeeff0123456789abcdeffedcba9876543210'
                      ],
                      / image-size / 14:34768,
                  } ,
                  / condition-vendor-identifier / 1,F6 / nil / ,



Moran, et al.          Expires September 10, 2020              [Page 77]


Internet-Draft             SUIT CBOR Manifest                 March 2020


                  / condition-class-identifier / 2,F6 / nil /
              ] /,
          } /,
          / install / 9:h'880c0013a115781b687474703a2f2f6578616d706c652e
  636f6d2f66696c652e62696e15f603f6' / [
              / directive-set-component-index / 12,0 ,
              / directive-set-parameters / 19,{
                  / uri / 21:'http://example.com/file.bin',
              } ,
              / directive-fetch / 21,F6 / nil / ,
              / condition-image-match / 3,F6 / nil /
          ] /,
          / validate / 10:h'840c0003f6' / [
              / directive-set-component-index / 12,0 ,
              / condition-image-match / 3,F6 / nil /
          ] /,
          / load / 11:h'880c0113a21301160016f603f6' / [
              / directive-set-component-index / 12,1 ,
              / directive-set-parameters / 19,{
                  / source-component / 22:0 / [h'00'] /,
                  / compression-info / 19:1 / gzip /,
              } ,
              / directive-copy / 22,F6 / nil / ,
              / condition-image-match / 3,F6 / nil /
          ] /,
          / run / 12:h'840c0117f6' / [
              / directive-set-component-index / 12,1 ,
              / directive-run / 23,F6 / nil /
          ] /,
      } /,
  }

   Total size of manifest without COSE authentication object: 182

   Manifest:

   a10358b2a701010205035863a2024782814100814101045856880c0014a4
   0150fa6b4a53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf42
   9b2d51f2ab45038202582000112233445566778899aabbccddeeff012345
   6789abcdeffedcba98765432100e1987d001f602f6095827880c0013a115
   781b687474703a2f2f6578616d706c652e636f6d2f66696c652e62696e15
   f603f60a45840c0003f60b4d880c0113a21301160016f603f60c45840c01
   17f6

   Total size of manifest with COSE authentication object: 297

   Manifest with COSE authentication object:




Moran, et al.          Expires September 10, 2020              [Page 78]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   a202587081d28443a10126a0582482025820310798d3d8276a740505d1f0
   17972e281d6d26c9967a658879ae6d07e6a238a958404d48f0059918c261
   bc1636b467b2b455801c4d211758a42e82a8f8fc245f21857d7c0e78f1b6
   d6a8ab1f0c9e147043066c0af53c1563070d4934faeec21bac550358b2a7
   01010205035863a2024782814100814101045856880c0014a40150fa6b4a
   53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab
   45038202582000112233445566778899aabbccddeeff0123456789abcdef
   fedcba98765432100e1987d001f602f6095827880c0013a115781b687474
   703a2f2f6578616d706c652e636f6d2f66696c652e62696e15f603f60a45
   840c0003f60b4d880c0113a21301160016f603f60c45840c0117f6

12.6.  Example 5: Compatibility Test, Download, Installation, and Secure
       Boot

   Compatibility test, download, installation, and secure boot.

  {
      / authentication-wrapper / 2:h'81d28443a10126a05824820258209a45659
  58c6e09c92fc69feeb09081c875f113082245ba2025801fa46dc2280e58404604e6413
  30d610fd0a0545b9b816f09c0767edf66fc57f40393cd4423e0807b36226e843e0f57b
  f860a3cf542655048648dea81e62e39f19e7ac96652d3de90' / [
          18([
                  / protected / h'a10126' / {
                      / alg / 1:-7 / ES256 /,
                  } /,
                  / unprotected / {
                  },
                  / payload / h'820258209a4565958c6e09c92fc69feeb09081c8
  75f113082245ba2025801fa46dc2280e' / [
                      / algorithm-id / 2 / sha256 /,
                      / digest-bytes /
  h'9a4565958c6e09c92fc69feeb09081c875f113082245ba2025801fa46dc2280e'
                  ] /,
                  / signature / h'4604e641330d610fd0a0545b9b816f09c0767e
  df66fc57f40393cd4423e0807b36226e843e0f57bf860a3cf542655048648dea81e62e
  39f19e7ac96652d3de90'
              ])
      ] /,
      / manifest / 3:h'a701010205035863a2024782814101814100045856880c011
  4a40150fa6b4a53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f
  2ab45038202582000112233445566778899aabbccddeeff0123456789abcdeffedcba9
  8765432100e1987d001f602f6085823840c0013a115781b687474703a2f2f6578616d7
  06c652e636f6d2f66696c652e62696e094b880c0113a1160016f603f60a45840c0103f
  60c45840c0117f6' / {
          / manifest-version / 1:1,
          / manifest-sequence-number / 2:5,
          / common / 3:h'a2024782814101814100045856880c0114a40150fa6b4a5
  3d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab45038202582



Moran, et al.          Expires September 10, 2020              [Page 79]


Internet-Draft             SUIT CBOR Manifest                 March 2020


  000112233445566778899aabbccddeeff0123456789abcdeffedcba98765432100e198
  7d001f602f6' / {
              / components / 2:h'82814101814100' / [
                  [h'01'] ,
                  [h'00']
              ] /,
              / common-sequence / 4:h'880c0114a40150fa6b4a53d5ad5fdfbe9d
  e663e4d41ffe02501492af1425695e48bf429b2d51f2ab450382025820001122334455
  66778899aabbccddeeff0123456789abcdeffedcba98765432100e1987d001f602f6'
  / [
                  / directive-set-component-index / 12,1 ,
                  / directive-override-parameters / 20,{
                      / vendor-id /
  1:h'fa6b4a53d5ad5fdfbe9de663e4d41ffe' / fa6b4a53-d5ad-5fdf-
  be9d-e663e4d41ffe /,
                      / class-id / 2:h'1492af1425695e48bf429b2d51f2ab45'
  / 1492af14-2569-5e48-bf42-9b2d51f2ab45 /,
                      / image-digest / 3:[
                          / algorithm-id / 2 / sha256 /,
                          / digest-bytes /
  h'00112233445566778899aabbccddeeff0123456789abcdeffedcba9876543210'
                      ],
                      / image-size / 14:34768,
                  } ,
                  / condition-vendor-identifier / 1,F6 / nil / ,
                  / condition-class-identifier / 2,F6 / nil /
              ] /,
          } /,
          / payload-fetch / 8:h'840c0013a115781b687474703a2f2f6578616d70
  6c652e636f6d2f66696c652e62696e' / [
              / directive-set-component-index / 12,0 ,
              / directive-set-parameters / 19,{
                  / uri / 21:'http://example.com/file.bin',
              }
          ] /,
          / install / 9:h'880c0113a1160016f603f6' / [
              / directive-set-component-index / 12,1 ,
              / directive-set-parameters / 19,{
                  / source-component / 22:0 / [h'01'] /,
              } ,
              / directive-copy / 22,F6 / nil / ,
              / condition-image-match / 3,F6 / nil /
          ] /,
          / validate / 10:h'840c0103f6' / [
              / directive-set-component-index / 12,1 ,
              / condition-image-match / 3,F6 / nil /
          ] /,
          / run / 12:h'840c0117f6' / [



Moran, et al.          Expires September 10, 2020              [Page 80]


Internet-Draft             SUIT CBOR Manifest                 March 2020


              / directive-set-component-index / 12,1 ,
              / directive-run / 23,F6 / nil /
          ] /,
      } /,
  }

   Total size of manifest without COSE authentication object: 176

   Manifest:

   a10358aca701010205035863a2024782814101814100045856880c0114a4
   0150fa6b4a53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf42
   9b2d51f2ab45038202582000112233445566778899aabbccddeeff012345
   6789abcdeffedcba98765432100e1987d001f602f6085823840c0013a115
   781b687474703a2f2f6578616d706c652e636f6d2f66696c652e62696e09
   4b880c0113a1160016f603f60a45840c0103f60c45840c0117f6

   Total size of manifest with COSE authentication object: 291

   Manifest with COSE authentication object:

   a202587081d28443a10126a05824820258209a4565958c6e09c92fc69fee
   b09081c875f113082245ba2025801fa46dc2280e58404604e641330d610f
   d0a0545b9b816f09c0767edf66fc57f40393cd4423e0807b36226e843e0f
   57bf860a3cf542655048648dea81e62e39f19e7ac96652d3de900358aca7
   01010205035863a2024782814101814100045856880c0114a40150fa6b4a
   53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab
   45038202582000112233445566778899aabbccddeeff0123456789abcdef
   fedcba98765432100e1987d001f602f6085823840c0013a115781b687474
   703a2f2f6578616d706c652e636f6d2f66696c652e62696e094b880c0113
   a1160016f603f60a45840c0103f60c45840c0117f6

12.7.  Example 6: Two Images

   Compatibility test, 2 images, simultaneous download and installation,
   and secure boot.

  {
      / authentication-wrapper / 2:h'81d28443a10126a05824820258201d15a17
  13d3a4510ca392454adff987abb5425348e449618122ffa817012cc315840197a4a3a4
  188fe1dd8baa468ae9a35ac8e5ef462017530116eadd90892c96c6ab00825fcb45edb7
  57547733c14d3b637ea8a085ce7bfc782a0b2cd80d31b1294' / [
          18([
                  / protected / h'a10126' / {
                      / alg / 1:-7 / ES256 /,
                  } /,
                  / unprotected / {
                  },



Moran, et al.          Expires September 10, 2020              [Page 81]


Internet-Draft             SUIT CBOR Manifest                 March 2020


                  / payload / h'820258201d15a1713d3a4510ca392454adff987a
  bb5425348e449618122ffa817012cc31' / [
                      / algorithm-id / 2 / sha256 /,
                      / digest-bytes /
  h'1d15a1713d3a4510ca392454adff987abb5425348e449618122ffa817012cc31'
                  ] /,
                  / signature / h'197a4a3a4188fe1dd8baa468ae9a35ac8e5ef4
  62017530116eadd90892c96c6ab00825fcb45edb757547733c14d3b637ea8a085ce7bf
  c782a0b2cd80d31b1294'
              ])
      ] /,
      / manifest / 3:h'a501010203035899a202448181410004588f8814a20150fa6
  b4a53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab450f825
  82e8405f614a2038202582000112233445566778899aabbccddeeff0123456789abcde
  ffedcba98765432100e1987d058308405f614a203820258200123456789abcdeffedcb
  a987654321000112233445566778899aabbccddeeff0e1a00012c2201f602f60958538
  60f8258248405f613a115781c687474703a2f2f6578616d706c652e636f6d2f66696c6
  5312e62696e58248405f613a115781c687474703a2f2f6578616d706c652e636f6d2f6
  6696c65322e62696e15f603f60a438203f6' / {
          / manifest-version / 1:1,
          / manifest-sequence-number / 2:3,
          / common / 3:h'a202448181410004588f8814a20150fa6b4a53d5ad5fdfb
  e9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab450f82582e8405f614a20
  38202582000112233445566778899aabbccddeeff0123456789abcdeffedcba9876543
  2100e1987d058308405f614a203820258200123456789abcdeffedcba9876543210001
  12233445566778899aabbccddeeff0e1a00012c2201f602f6' / {
              / components / 2:h'81814100' / [
                  [h'00']
              ] /,
              / common-sequence / 4:h'8814a20150fa6b4a53d5ad5fdfbe9de663
  e4d41ffe02501492af1425695e48bf429b2d51f2ab450f82582e8405f614a203820258
  2000112233445566778899aabbccddeeff0123456789abcdeffedcba98765432100e19
  87d058308405f614a203820258200123456789abcdeffedcba98765432100011223344
  5566778899aabbccddeeff0e1a00012c2201f602f6' / [
                  / directive-override-parameters / 20,{
                      / vendor-id /
  1:h'fa6b4a53d5ad5fdfbe9de663e4d41ffe' / fa6b4a53-d5ad-5fdf-
  be9d-e663e4d41ffe /,
                      / class-id / 2:h'1492af1425695e48bf429b2d51f2ab45'
  / 1492af14-2569-5e48-bf42-9b2d51f2ab45 /,
                  } ,
                  / directive-try-each / 15,[
                      h'8405f614a2038202582000112233445566778899aabbccdd
  eeff0123456789abcdeffedcba98765432100e1987d0' / [
                          / condition-component-offset / 5,F6 / nil / ,
                          / directive-override-parameters / 20,{
                              / image-digest / 3:[
                                  / algorithm-id / 2 / sha256 /,



Moran, et al.          Expires September 10, 2020              [Page 82]


Internet-Draft             SUIT CBOR Manifest                 March 2020


                                  / digest-bytes /
  h'00112233445566778899aabbccddeeff0123456789abcdeffedcba9876543210'
                              ],
                              / image-size / 14:34768,
                          }
                      ] / ,
                      h'8405f614a203820258200123456789abcdeffedcba987654
  321000112233445566778899aabbccddeeff0e1a00012c22' / [
                          / condition-component-offset / 5,F6 / nil / ,
                          / directive-override-parameters / 20,{
                              / image-digest / 3:[
                                  / algorithm-id / 2 / sha256 /,
                                  / digest-bytes /
  h'0123456789abcdeffedcba987654321000112233445566778899aabbccddeeff'
                              ],
                              / image-size / 14:76834,
                          }
                      ] /
                  ] ,
                  / condition-vendor-identifier / 1,F6 / nil / ,
                  / condition-class-identifier / 2,F6 / nil /
              ] /,
          } /,
          / install / 9:h'860f8258248405f613a115781c687474703a2f2f657861
  6d706c652e636f6d2f66696c65312e62696e58248405f613a115781c687474703a2f2f
  6578616d706c652e636f6d2f66696c65322e62696e15f603f6' / [
              / directive-try-each / 15,[
                  h'8405f613a115781c687474703a2f2f6578616d706c652e636f6d
  2f66696c65312e62696e' / [
                      / condition-component-offset / 5,F6 / nil / ,
                      / directive-set-parameters / 19,{
                          / uri / 21:'http://example.com/file1.bin',
                      }
                  ] / ,
                  h'8405f613a115781c687474703a2f2f6578616d706c652e636f6d
  2f66696c65322e62696e' / [
                      / condition-component-offset / 5,F6 / nil / ,
                      / directive-set-parameters / 19,{
                          / uri / 21:'http://example.com/file2.bin',
                      }
                  ] /
              ] ,
              / directive-fetch / 21,F6 / nil / ,
              / condition-image-match / 3,F6 / nil /
          ] /,
          / validate / 10:h'8203f6' / [
              / condition-image-match / 3,F6 / nil /
          ] /,



Moran, et al.          Expires September 10, 2020              [Page 83]


Internet-Draft             SUIT CBOR Manifest                 March 2020


      } /,
  }

   Total size of manifest without COSE authentication object: 256

   Manifest:

   a10358fca501010203035899a202448181410004588f8814a20150fa6b4a
   53d5ad5fdfbe9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab
   450f82582e8405f614a2038202582000112233445566778899aabbccddee
   ff0123456789abcdeffedcba98765432100e1987d058308405f614a20382
   0258200123456789abcdeffedcba987654321000112233445566778899aa
   bbccddeeff0e1a00012c2201f602f6095853860f8258248405f613a11578
   1c687474703a2f2f6578616d706c652e636f6d2f66696c65312e62696e58
   248405f613a115781c687474703a2f2f6578616d706c652e636f6d2f6669
   6c65322e62696e15f603f60a438203f6

   Total size of manifest with COSE authentication object: 371

   Manifest with COSE authentication object:

   a202587081d28443a10126a05824820258201d15a1713d3a4510ca392454
   adff987abb5425348e449618122ffa817012cc315840197a4a3a4188fe1d
   d8baa468ae9a35ac8e5ef462017530116eadd90892c96c6ab00825fcb45e
   db757547733c14d3b637ea8a085ce7bfc782a0b2cd80d31b12940358fca5
   01010203035899a202448181410004588f8814a20150fa6b4a53d5ad5fdf
   be9de663e4d41ffe02501492af1425695e48bf429b2d51f2ab450f82582e
   8405f614a2038202582000112233445566778899aabbccddeeff01234567
   89abcdeffedcba98765432100e1987d058308405f614a203820258200123
   456789abcdeffedcba987654321000112233445566778899aabbccddeeff
   0e1a00012c2201f602f6095853860f8258248405f613a115781c68747470
   3a2f2f6578616d706c652e636f6d2f66696c65312e62696e58248405f613
   a115781c687474703a2f2f6578616d706c652e636f6d2f66696c65322e62
   696e15f603f60a438203f6

13.  IANA Considerations

   IANA is requested to setup a registry group for SUIT elements.

   Within this group, IANA is requested to setup registries for SUIT
   keys:

   -  SUIT Envelope Elements

   -  SUIT Manifest Elements

   -  SUIT Common Elements




Moran, et al.          Expires September 10, 2020              [Page 84]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   -  SUIT Commands

   -  SUIT Parameters

   -  SUIT Text Values

   -  SUIT Algorithm Identifiers

   For each registry, values 0-23 are Standards Action, 24-255 are IETF
   Review, 256-65535 are Expert Review, and 65536 or greater are First
   Come First Served.

   Negative values -23 to 0 are Experimental Use, -24 and lower are
   Private Use.

14.  Security Considerations

   This document is about a manifest format describing and protecting
   firmware images and as such it is part of a larger solution for
   offering a standardized way of delivering firmware updates to IoT
   devices.  A more detailed discussion about security can be found in
   the architecture document [I-D.ietf-suit-architecture] and in
   [I-D.ietf-suit-information-model].

15.  Mailing List Information

   The discussion list for this document is located at the e-mail
   address suit@ietf.org [1].  Information on the group and information
   on how to subscribe to the list is at
   https://www1.ietf.org/mailman/listinfo/suit [2]

   Archives of the list can be found at: https://www.ietf.org/mail-
   archive/web/suit/current/index.html [3]

16.  Acknowledgements

   We would like to thank the following persons for their support in
   designing this mechanism:

   -  Milosch Meriac

   -  Geraint Luff

   -  Dan Ros

   -  John-Paul Stanford

   -  Hugo Vincent



Moran, et al.          Expires September 10, 2020              [Page 85]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   -  Carsten Bormann

   -  Oeyvind Roenningstad

   -  Frank Audun Kvamtroe

   -  Krzysztof Chru&#347;ci&#324;ski

   -  Andrzej Puzdrowski

   -  Michael Richardson

   -  David Brown

   -  Emmanuel Baccelli

17.  References

17.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC4122]  Leach, P., Mealling, M., and R. Salz, "A Universally
              Unique IDentifier (UUID) URN Namespace", RFC 4122,
              DOI 10.17487/RFC4122, July 2005,
              <https://www.rfc-editor.org/info/rfc4122>.

   [RFC8152]  Schaad, J., "CBOR Object Signing and Encryption (COSE)",
              RFC 8152, DOI 10.17487/RFC8152, July 2017,
              <https://www.rfc-editor.org/info/rfc8152>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

17.2.  Informative References

   [I-D.ietf-suit-architecture]
              Moran, B., Tschofenig, H., Brown, D., and M. Meriac, "A
              Firmware Update Architecture for Internet of Things",
              draft-ietf-suit-architecture-08 (work in progress),
              November 2019.






Moran, et al.          Expires September 10, 2020              [Page 86]


Internet-Draft             SUIT CBOR Manifest                 March 2020


   [I-D.ietf-suit-information-model]
              Moran, B., Tschofenig, H., and H. Birkholz, "An
              Information Model for Firmware Updates in IoT Devices",
              draft-ietf-suit-information-model-05 (work in progress),
              January 2020.

17.3.  URIs

   [1] mailto:suit@ietf.org

   [2] https://www1.ietf.org/mailman/listinfo/suit

   [3] https://www.ietf.org/mail-archive/web/suit/current/index.html

Authors' Addresses

   Brendan Moran
   Arm Limited

   EMail: Brendan.Moran@arm.com


   Hannes Tschofenig
   Arm Limited

   EMail: hannes.tschofenig@arm.com


   Henk Birkholz
   Fraunhofer SIT

   EMail: henk.birkholz@sit.fraunhofer.de


   Koen Zandberg
   Inria

   EMail: koen.zandberg@inria.fr













Moran, et al.          Expires September 10, 2020              [Page 87]