HTTPbis Working Group R. Fielding, Ed. Internet-Draft Adobe Obsoletes: 2616 (if approved) J. Gettys Intended status: Standards Track Alcatel-Lucent Expires: July 7, 2012 J. Mogul HP H. Frystyk Microsoft L. Masinter Adobe P. Leach Microsoft T. Berners-Lee W3C/MIT Y. Lafon, Ed. W3C J. Reschke, Ed. greenbytes January 4, 2012 HTTP/1.1, part 4: Conditional Requests draft-ietf-httpbis-p4-conditional-18 Abstract The Hypertext Transfer Protocol (HTTP) is an application-level protocol for distributed, collaborative, hypertext information systems. HTTP has been in use by the World Wide Web global information initiative since 1990. This document is Part 4 of the seven-part specification that defines the protocol referred to as "HTTP/1.1" and, taken together, obsoletes RFC 2616. Part 4 defines request header fields for indicating conditional requests and the rules for constructing responses to those requests. Editorial Note (To be removed by RFC Editor) Discussion of this draft should take place on the HTTPBIS working group mailing list (ietf-http-wg@w3.org), which is archived at <http://lists.w3.org/Archives/Public/ietf-http-wg/>. The current issues list is at <http://tools.ietf.org/wg/httpbis/trac/report/3> and related documents (including fancy diffs) can be found at <http://tools.ietf.org/wg/httpbis/>. The changes in this draft are summarized in Appendix C.19. Fielding, et al. Expires July 7, 2012 [Page 1]
Internet-Draft HTTP/1.1, Part 4 January 2012 Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on July 7, 2012. Copyright Notice Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1. Conformance and Error Handling . . . . . . . . . . . . . . 5 Fielding, et al. Expires July 7, 2012 [Page 2]
Internet-Draft HTTP/1.1, Part 4 January 2012 1.2. Syntax Notation . . . . . . . . . . . . . . . . . . . . . 6 2. Validators . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1. Weak versus Strong . . . . . . . . . . . . . . . . . . . . 6 2.2. Last-Modified . . . . . . . . . . . . . . . . . . . . . . 8 2.2.1. Generation . . . . . . . . . . . . . . . . . . . . . . 8 2.2.2. Comparison . . . . . . . . . . . . . . . . . . . . . . 9 2.3. ETag . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.3.1. Generation . . . . . . . . . . . . . . . . . . . . . . 11 2.3.2. Comparison . . . . . . . . . . . . . . . . . . . . . . 12 2.3.3. Example: Entity-tags varying on Content-Negotiated Resources . . . . . . . . . . . . . . . . . . . . . . 12 2.4. Rules for When to Use Entity-tags and Last-Modified Dates . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3. Precondition Header Fields . . . . . . . . . . . . . . . . . . 15 3.1. If-Match . . . . . . . . . . . . . . . . . . . . . . . . . 15 3.2. If-None-Match . . . . . . . . . . . . . . . . . . . . . . 16 3.3. If-Modified-Since . . . . . . . . . . . . . . . . . . . . 17 3.4. If-Unmodified-Since . . . . . . . . . . . . . . . . . . . 18 3.5. If-Range . . . . . . . . . . . . . . . . . . . . . . . . . 19 4. Status Code Definitions . . . . . . . . . . . . . . . . . . . 19 4.1. 304 Not Modified . . . . . . . . . . . . . . . . . . . . . 19 4.2. 412 Precondition Failed . . . . . . . . . . . . . . . . . 20 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 20 5.1. Status Code Registration . . . . . . . . . . . . . . . . . 20 5.2. Header Field Registration . . . . . . . . . . . . . . . . 20 6. Security Considerations . . . . . . . . . . . . . . . . . . . 21 7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 21 8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 21 8.1. Normative References . . . . . . . . . . . . . . . . . . . 21 8.2. Informative References . . . . . . . . . . . . . . . . . . 22 Appendix A. Changes from RFC 2616 . . . . . . . . . . . . . . . . 22 Appendix B. Collected ABNF . . . . . . . . . . . . . . . . . . . 23 Appendix C. Change Log (to be removed by RFC Editor before publication) . . . . . . . . . . . . . . . . . . . . 23 C.1. Since RFC 2616 . . . . . . . . . . . . . . . . . . . . . . 23 C.2. Since draft-ietf-httpbis-p4-conditional-00 . . . . . . . . 23 C.3. Since draft-ietf-httpbis-p4-conditional-01 . . . . . . . . 24 C.4. Since draft-ietf-httpbis-p4-conditional-02 . . . . . . . . 24 C.5. Since draft-ietf-httpbis-p4-conditional-03 . . . . . . . . 24 C.6. Since draft-ietf-httpbis-p4-conditional-04 . . . . . . . . 24 C.7. Since draft-ietf-httpbis-p4-conditional-05 . . . . . . . . 25 C.8. Since draft-ietf-httpbis-p4-conditional-06 . . . . . . . . 25 C.9. Since draft-ietf-httpbis-p4-conditional-07 . . . . . . . . 25 C.10. Since draft-ietf-httpbis-p4-conditional-08 . . . . . . . . 25 C.11. Since draft-ietf-httpbis-p4-conditional-09 . . . . . . . . 25 C.12. Since draft-ietf-httpbis-p4-conditional-10 . . . . . . . . 25 C.13. Since draft-ietf-httpbis-p4-conditional-11 . . . . . . . . 26 C.14. Since draft-ietf-httpbis-p4-conditional-12 . . . . . . . . 26 Fielding, et al. Expires July 7, 2012 [Page 3]
Internet-Draft HTTP/1.1, Part 4 January 2012 C.15. Since draft-ietf-httpbis-p4-conditional-13 . . . . . . . . 26 C.16. Since draft-ietf-httpbis-p4-conditional-14 . . . . . . . . 26 C.17. Since draft-ietf-httpbis-p4-conditional-15 . . . . . . . . 26 C.18. Since draft-ietf-httpbis-p4-conditional-16 . . . . . . . . 26 C.19. Since draft-ietf-httpbis-p4-conditional-17 . . . . . . . . 27 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Fielding, et al. Expires July 7, 2012 [Page 4]
Internet-Draft HTTP/1.1, Part 4 January 2012 1. Introduction This document defines the HTTP/1.1 conditional request mechanisms, including both metadata for indicating/observing changes in resource representations and request header fields that specify preconditions on that metadata be checked before performing the request method. Conditional GET requests are the most efficient mechanism for HTTP cache updates [Part6]. Conditionals can also be applied to state- changing methods, such as PUT and DELETE, to prevent the "lost update" problem: one client accidentally overwriting the work of another client that has been acting in parallel. Conditional request preconditions are based on the state of the target resource as a whole (its current value set) or the state as observed in a previously obtained representation (one value in that set). A resource might have multiple current representations, each with its own observable state. The conditional request mechanisms assume that the mapping of requests to corresponding representations will be consistent over time if the server intends to take advantage of conditionals. Regardless, if the mapping is inconsistent and the server is unable to select the appropriate representation, then no harm will result when the precondition evaluates to false. We use the term "selected representation" to refer to the current representation of the target resource that would have been selected in a successful response if the same request had used the method GET and had excluded all of the conditional request header fields. The conditional request preconditions are evaluated by comparing the values provided in the request header fields to the current metadata for the selected representation. 1.1. Conformance and Error Handling The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. This document defines conformance criteria for several roles in HTTP communication, including Senders, Recipients, Clients, Servers, User- Agents, Origin Servers, Intermediaries, Proxies and Gateways. See Section 2 of [Part1] for definitions of these terms. An implementation is considered conformant if it complies with all of the requirements associated with its role(s). Note that SHOULD-level requirements are relevant here, unless one of the documented exceptions is applicable. This document also uses ABNF to define valid protocol elements Fielding, et al. Expires July 7, 2012 [Page 5]
Internet-Draft HTTP/1.1, Part 4 January 2012 (Section 1.2). In addition to the prose requirements placed upon them, Senders MUST NOT generate protocol elements that are invalid. Unless noted otherwise, Recipients MAY take steps to recover a usable protocol element from an invalid construct. However, HTTP does not define specific error handling mechanisms, except in cases where it has direct impact on security. This is because different uses of the protocol require different error handling strategies; for example, a Web browser may wish to transparently recover from a response where the Location header field doesn't parse according to the ABNF, whereby in a systems control protocol using HTTP, this type of error recovery could lead to dangerous consequences. 1.2. Syntax Notation This specification uses the ABNF syntax defined in Section 1.2 of [Part1] (which extends the syntax defined in [RFC5234] with a list rule). Appendix B shows the collected ABNF, with the list rule expanded. The following core rules are included by reference, as defined in [RFC5234], Appendix B.1: ALPHA (letters), CR (carriage return), CRLF (CR LF), CTL (controls), DIGIT (decimal 0-9), DQUOTE (double quote), HEXDIG (hexadecimal 0-9/A-F/a-f), LF (line feed), OCTET (any 8-bit sequence of data), SP (space), and VCHAR (any visible US-ASCII character). The ABNF rules below are defined in [Part1] and [Part2]: OWS = <OWS, defined in [Part1], Section 1.2.2> obs-text = <obs-text, defined in [Part1], Section 3.2.3> HTTP-date = <HTTP-date, defined in [Part2], Section 8> 2. Validators This specification defines two forms of metadata that are commonly used to observe resource state and test for preconditions: modification dates and opaque entity tags. Additional metadata that reflects resource state has been defined by various extensions of HTTP, such as WebDAV [RFC4918], that are beyond the scope of this specification. A resource metadata value is referred to as a "validator" when it is used within a precondition. 2.1. Weak versus Strong Validators come in two flavors: strong or weak. Weak validators are easy to generate but are far less useful for comparisons. Strong validators are ideal for comparisons but can be very difficult (and Fielding, et al. Expires July 7, 2012 [Page 6]
Internet-Draft HTTP/1.1, Part 4 January 2012 occasionally impossible) to generate efficiently. Rather than impose that all forms of resource adhere to the same strength of validator, HTTP exposes the type of validator in use and imposes restrictions on when weak validators can be used as preconditions. A "strong validator" is a representation metadata value that MUST be changed to a new, previously unused or guaranteed unique, value whenever a change occurs to the representation data such that a change would be observable in the payload body of a 200 response to GET. A strong validator MAY be changed for other reasons, such as when a semantically significant part of the representation metadata is changed (e.g., Content-Type), but it is in the best interests of the origin server to only change the value when it is necessary to invalidate the stored responses held by remote caches and authoring tools. A strong validator MUST be unique across all representations of a given resource, such that no two representations of that resource share the same validator unless their payload body would be identical. Cache entries might persist for arbitrarily long periods, regardless of expiration times. Thus, a cache might attempt to validate an entry using a validator that it obtained in the distant past. A strong validator MUST be unique across all versions of all representations associated with a particular resource over time. However, there is no implication of uniqueness across representations of different resources (i.e., the same strong validator might be in use for representations of multiple resources at the same time and does not imply that those representations are equivalent). There are a variety of strong validators used in practice. The best are based on strict revision control, wherein each change to a representation always results in a unique node name and revision identifier being assigned before the representation is made accessible to GET. A cryptographic hash function applied to the representation data is also sufficient if the data is available prior to the response header fields being sent and the digest does not need to be recalculated every time a validation request is received. However, if a resource has distinct representations that differ only in their metadata, such as might occur with content negotiation over media types that happen to share the same data format, then a server SHOULD incorporate additional information in the validator to distinguish those representations and avoid confusing cache behavior. In contrast, a "weak validator" is a representation metadata value that might not be changed for every change to the representation data. This weakness might be due to limitations in how the value is calculated, such as clock resolution or an inability to ensure uniqueness for all possible representations of the resource, or due Fielding, et al. Expires July 7, 2012 [Page 7]
Internet-Draft HTTP/1.1, Part 4 January 2012 to a desire by the resource owner to group representations by some self-determined set of equivalency rather than unique sequences of data. A weak entity-tag SHOULD change whenever the origin server considers prior representations to be unacceptable as a substitute for the current representation. In other words, a weak entity-tag SHOULD change whenever the origin server wants caches to invalidate old responses. For example, the representation of a weather report that changes in content every second, based on dynamic measurements, might be grouped into sets of equivalent representations (from the origin server's perspective) with the same weak validator in order to allow cached representations to be valid for a reasonable period of time (perhaps adjusted dynamically based on server load or weather quality). Likewise, a representation's modification time, if defined with only one-second resolution, might be a weak validator if it is possible for the representation to be modified twice during a single second and retrieved between those modifications. A "use" of a validator occurs when either a client generates a request and includes the validator in a precondition or when a server compares two validators. Weak validators are only usable in contexts that do not depend on exact equality of a representation's payload body. Strong validators are usable and preferred for all conditional requests, including cache validation, partial content ranges, and "lost update" avoidance. 2.2. Last-Modified The "Last-Modified" header field indicates the date and time at which the origin server believes the selected representation was last modified. Last-Modified = HTTP-date An example of its use is Last-Modified: Tue, 15 Nov 1994 12:45:26 GMT 2.2.1. Generation Origin servers SHOULD send Last-Modified for any selected representation for which a last modification date can be reasonably and consistently determined, since its use in conditional requests and evaluating cache freshness ([Part6]) results in a substantial reduction of HTTP traffic on the Internet and can be a significant factor in improving service scalability and reliability. Fielding, et al. Expires July 7, 2012 [Page 8]
Internet-Draft HTTP/1.1, Part 4 January 2012 A representation is typically the sum of many parts behind the resource interface. The last-modified time would usually be the most recent time that any of those parts were changed. How that value is determined for any given resource is an implementation detail beyond the scope of this specification. What matters to HTTP is how recipients of the Last-Modified header field can use its value to make conditional requests and test the validity of locally cached responses. An origin server SHOULD obtain the Last-Modified value of the representation as close as possible to the time that it generates the Date field-value for its response. This allows a recipient to make an accurate assessment of the representation's modification time, especially if the representation changes near the time that the response is generated. An origin server with a clock MUST NOT send a Last-Modified date that is later than the server's time of message origination (Date). If the last modification time is derived from implementation-specific metadata that evaluates to some time in the future, according to the origin server's clock, then the origin server MUST replace that value with the message origination date. This prevents a future modification date from having an adverse impact on cache validation. An origin server without a clock MUST NOT assign Last-Modified values to a response unless these values were associated with the resource by some other system or user with a reliable clock. 2.2.2. Comparison A Last-Modified time, when used as a validator in a request, is implicitly weak unless it is possible to deduce that it is strong, using the following rules: o The validator is being compared by an origin server to the actual current validator for the representation and, o That origin server reliably knows that the associated representation did not change twice during the second covered by the presented validator. or o The validator is about to be used by a client in an If-Modified- Since, If-Unmodified-Since header field, because the client has a cache entry, or If-Range for the associated representation, and Fielding, et al. Expires July 7, 2012 [Page 9]
Internet-Draft HTTP/1.1, Part 4 January 2012 o That cache entry includes a Date value, which gives the time when the origin server sent the original response, and o The presented Last-Modified time is at least 60 seconds before the Date value. or o The validator is being compared by an intermediate cache to the validator stored in its cache entry for the representation, and o That cache entry includes a Date value, which gives the time when the origin server sent the original response, and o The presented Last-Modified time is at least 60 seconds before the Date value. This method relies on the fact that if two different responses were sent by the origin server during the same second, but both had the same Last-Modified time, then at least one of those responses would have a Date value equal to its Last-Modified time. The arbitrary 60- second limit guards against the possibility that the Date and Last- Modified values are generated from different clocks, or at somewhat different times during the preparation of the response. An implementation MAY use a value larger than 60 seconds, if it is believed that 60 seconds is too short. 2.3. ETag The ETag header field provides the current entity-tag for the selected representation. An entity-tag is an opaque validator for differentiating between multiple representations of the same resource, regardless of whether those multiple representations are due to resource state changes over time, content negotiation resulting in multiple representations being valid at the same time, or both. An entity-tag consists of an opaque quoted string, possibly prefixed by a weakness indicator. ETag = entity-tag entity-tag = [ weak ] opaque-tag weak = %x57.2F ; "W/", case-sensitive opaque-tag = DQUOTE *etagc DQUOTE etagc = %x21 / %x23-7E / obs-text ; VCHAR except double quotes, plus obs-text Fielding, et al. Expires July 7, 2012 [Page 10]
Internet-Draft HTTP/1.1, Part 4 January 2012 Note: Previously, opaque-tag was defined to be a quoted-string ([RFC2616], Section 3.11), thus some recipients might perform backslash unescaping. Servers therefore ought to avoid backslash characters in entity tags. An entity-tag can be more reliable for validation than a modification date in situations where it is inconvenient to store modification dates, where the one-second resolution of HTTP date values is not sufficient, or where modification dates are not consistently maintained. Examples: ETag: "xyzzy" ETag: W/"xyzzy" ETag: "" An entity-tag can be either a weak or strong validator, with strong being the default. If an origin server provides an entity-tag for a representation and the generation of that entity-tag does not satisfy the requirements for a strong validator (Section 2.1), then that entity-tag MUST be marked as weak by prefixing its opaque value with "W/" (case-sensitive). 2.3.1. Generation The principle behind entity-tags is that only the service author knows the implementation of a resource well enough to select the most accurate and efficient validation mechanism for that resource, and that any such mechanism can be mapped to a simple sequence of octets for easy comparison. Since the value is opaque, there is no need for the client to be aware of how each entity-tag is constructed. For example, a resource that has implementation-specific versioning applied to all changes might use an internal revision number, perhaps combined with a variance identifier for content negotiation, to accurately differentiate between representations. Other implementations might use a stored hash of representation content, a combination of various filesystem attributes, or a modification timestamp that has sub-second resolution. Origin servers SHOULD send ETag for any selected representation for which detection of changes can be reasonably and consistently determined, since the entity-tag's use in conditional requests and evaluating cache freshness ([Part6]) can result in a substantial reduction of HTTP network traffic and can be a significant factor in improving service scalability and reliability. Fielding, et al. Expires July 7, 2012 [Page 11]
Internet-Draft HTTP/1.1, Part 4 January 2012 2.3.2. Comparison There are two entity-tag comparison functions, depending on whether the comparison context allows the use of weak validators or not: o The strong comparison function: in order to be considered equal, both opaque-tags MUST be identical character-by-character, and both MUST NOT be weak. o The weak comparison function: in order to be considered equal, both opaque-tags MUST be identical character-by-character, but either or both of them MAY be tagged as "weak" without affecting the result. The example below shows the results for a set of entity-tag pairs, and both the weak and strong comparison function results: +--------+--------+-------------------+-----------------+ | ETag 1 | ETag 2 | Strong Comparison | Weak Comparison | +--------+--------+-------------------+-----------------+ | W/"1" | W/"1" | no match | match | | W/"1" | W/"2" | no match | no match | | W/"1" | "1" | no match | match | | "1" | "1" | match | match | +--------+--------+-------------------+-----------------+ 2.3.3. Example: Entity-tags varying on Content-Negotiated Resources Consider a resource that is subject to content negotiation (Section 5 of [Part3]), and where the representations returned upon a GET request vary based on the Accept-Encoding request header field (Section 6.3 of [Part3]): >> Request: GET /index HTTP/1.1 Host: www.example.com Accept-Encoding: gzip In this case, the response might or might not use the gzip content coding. If it does not, the response might look like: Fielding, et al. Expires July 7, 2012 [Page 12]
Internet-Draft HTTP/1.1, Part 4 January 2012 >> Response: HTTP/1.1 200 OK Date: Thu, 26 Mar 2010 00:05:00 GMT ETag: "123-a" Content-Length: 70 Vary: Accept-Encoding Content-Type: text/plain Hello World! Hello World! Hello World! Hello World! Hello World! An alternative representation that does use gzip content coding would be: >> Response: HTTP/1.1 200 OK Date: Thu, 26 Mar 2010 00:05:00 GMT ETag: "123-b" Content-Length: 43 Vary: Accept-Encoding Content-Type: text/plain Content-Encoding: gzip ...binary data... Note: Content codings are a property of the representation, so therefore an entity-tag of an encoded representation must be distinct from an unencoded representation to prevent conflicts during cache updates and range requests. In contrast, transfer codings (Section 5.1 of [Part1]) apply only during message transfer and do not require distinct entity-tags. 2.4. Rules for When to Use Entity-tags and Last-Modified Dates We adopt a set of rules and recommendations for origin servers, clients, and caches regarding when various validator types ought to be used, and for what purposes. HTTP/1.1 origin servers: o SHOULD send an entity-tag validator unless it is not feasible to generate one. Fielding, et al. Expires July 7, 2012 [Page 13]
Internet-Draft HTTP/1.1, Part 4 January 2012 o MAY send a weak entity-tag instead of a strong entity-tag, if performance considerations support the use of weak entity-tags, or if it is unfeasible to send a strong entity-tag. o SHOULD send a Last-Modified value if it is feasible to send one. In other words, the preferred behavior for an HTTP/1.1 origin server is to send both a strong entity-tag and a Last-Modified value. HTTP/1.1 clients: o MUST use that entity-tag in any cache-conditional request (using If-Match or If-None-Match) if an entity-tag has been provided by the origin server. o SHOULD use the Last-Modified value in non-subrange cache- conditional requests (using If-Modified-Since) if only a Last- Modified value has been provided by the origin server. o MAY use the Last-Modified value in subrange cache-conditional requests (using If-Unmodified-Since) if only a Last-Modified value has been provided by an HTTP/1.0 origin server. The user agent SHOULD provide a way to disable this, in case of difficulty. o SHOULD use both validators in cache-conditional requests if both an entity-tag and a Last-Modified value have been provided by the origin server. This allows both HTTP/1.0 and HTTP/1.1 caches to respond appropriately. An HTTP/1.1 origin server, upon receiving a conditional request that includes both a Last-Modified date (e.g., in an If-Modified-Since or If-Unmodified-Since header field) and one or more entity-tags (e.g., in an If-Match, If-None-Match, or If-Range header field) as cache validators, MUST NOT return a response status code of 304 (Not Modified) unless doing so is consistent with all of the conditional header fields in the request. An HTTP/1.1 caching proxy, upon receiving a conditional request that includes both a Last-Modified date and one or more entity-tags as cache validators, MUST NOT return a locally cached response to the client unless that cached response is consistent with all of the conditional header fields in the request. Note: The general principle behind these rules is that HTTP/1.1 servers and clients ought to transmit as much non-redundant information as is available in their responses and requests. HTTP/1.1 systems receiving this information will make the most conservative assumptions about the validators they receive. Fielding, et al. Expires July 7, 2012 [Page 14]
Internet-Draft HTTP/1.1, Part 4 January 2012 HTTP/1.0 clients and caches might ignore entity-tags. Generally, last-modified values received or used by these systems will support transparent and efficient caching, and so HTTP/1.1 origin servers should provide Last-Modified values. In those rare cases where the use of a Last-Modified value as a validator by an HTTP/1.0 system could result in a serious problem, then HTTP/1.1 origin servers should not provide one. 3. Precondition Header Fields This section defines the syntax and semantics of HTTP/1.1 header fields for applying preconditions on requests. 3.1. If-Match The "If-Match" header field MAY be used to make a request method conditional on the current existence or value of an entity-tag for one or more representations of the target resource. If-Match is generally useful for resource update requests, such as PUT requests, as a means for protecting against accidental overwrites when multiple clients are acting in parallel on the same resource (i.e., the "lost update" problem). An If-Match field-value of "*" places the precondition on the existence of any current representation for the target resource. If-Match = "*" / 1#entity-tag If any of the entity-tags listed in the If-Match field value match (as per Section 2.3.2) the entity-tag of the selected representation for the target resource, or if "*" is given and any current representation exists for the target resource, then the server MAY perform the request method as if the If-Match header field was not present. If none of the entity-tags match, or if "*" is given and no current representation exists, the server MUST NOT perform the requested method. Instead, the server MUST respond with the 412 (Precondition Failed) status code. If the request would, without the If-Match header field, result in anything other than a 2xx or 412 status code, then the If-Match header field MUST be ignored. Examples: If-Match: "xyzzy" If-Match: "xyzzy", "r2d2xxxx", "c3piozzzz" If-Match: * Fielding, et al. Expires July 7, 2012 [Page 15]
Internet-Draft HTTP/1.1, Part 4 January 2012 The result of a request having both an If-Match header field and either an If-None-Match or an If-Modified-Since header fields is undefined by this specification. 3.2. If-None-Match The "If-None-Match" header field MAY be used to make a request method conditional on not matching any of the current entity-tag values for representations of the target resource. If-None-Match is primarily used in conditional GET requests to enable efficient updates of cached information with a minimum amount of transaction overhead. A client that has one or more representations previously obtained from the target resource can send If-None-Match with a list of the associated entity-tags in the hope of receiving a 304 response if at least one of those representations matches the selected representation. If-None-Match MAY also be used with a value of "*" to prevent an unsafe request method (e.g., PUT) from inadvertently modifying an existing representation of the target resource when the client believes that the resource does not have a current representation. This is a variation on the "lost update" problem that might arise if more than one client attempts to create an initial representation for the target resource. If-None-Match = "*" / 1#entity-tag If any of the entity-tags listed in the If-None-Match field-value match (as per Section 2.3.2) the entity-tag of the selected representation, or if "*" is given and any current representation exists for that resource, then the server MUST NOT perform the requested method. Instead, if the request method was GET or HEAD, the server SHOULD respond with a 304 (Not Modified) status code, including the cache-related header fields (particularly ETag) of the selected representation that has a matching entity-tag. For all other request methods, the server MUST respond with a 412 (Precondition Failed) status code. If none of the entity-tags match, then the server MAY perform the requested method as if the If-None-Match header field did not exist, but MUST also ignore any If-Modified-Since header field(s) in the request. That is, if no entity-tags match, then the server MUST NOT return a 304 (Not Modified) response. If the request would, without the If-None-Match header field, result in anything other than a 2xx or 304 status code, then the If-None- Match header field MUST be ignored. (See Section 2.4 for a discussion of server behavior when both If-Modified-Since and If- Fielding, et al. Expires July 7, 2012 [Page 16]
Internet-Draft HTTP/1.1, Part 4 January 2012 None-Match appear in the same request.) Examples: If-None-Match: "xyzzy" If-None-Match: W/"xyzzy" If-None-Match: "xyzzy", "r2d2xxxx", "c3piozzzz" If-None-Match: W/"xyzzy", W/"r2d2xxxx", W/"c3piozzzz" If-None-Match: * The result of a request having both an If-None-Match header field and either an If-Match or an If-Unmodified-Since header fields is undefined by this specification. 3.3. If-Modified-Since The "If-Modified-Since" header field MAY be used to make a request method conditional by modification date: if the selected representation has not been modified since the time specified in this field, then do not perform the request method; instead, respond as detailed below. If-Modified-Since = HTTP-date An example of the field is: If-Modified-Since: Sat, 29 Oct 1994 19:43:31 GMT A GET method with an If-Modified-Since header field and no Range header field requests that the selected representation be transferred only if it has been modified since the date given by the If-Modified- Since header field. The algorithm for determining this includes the following cases: 1. If the request would normally result in anything other than a 200 (OK) status code, or if the passed If-Modified-Since date is invalid, the response is exactly the same as for a normal GET. A date which is later than the server's current time is invalid. 2. If the selected representation has been modified since the If- Modified-Since date, the response is exactly the same as for a normal GET. 3. If the selected representation has not been modified since a valid If-Modified-Since date, the server SHOULD return a 304 (Not Modified) response. The purpose of this feature is to allow efficient updates of cached Fielding, et al. Expires July 7, 2012 [Page 17]
Internet-Draft HTTP/1.1, Part 4 January 2012 information with a minimum amount of transaction overhead. Note: The Range header field modifies the meaning of If-Modified- Since; see Section 5.4 of [Part5] for full details. Note: If-Modified-Since times are interpreted by the server, whose clock might not be synchronized with the client. Note: When handling an If-Modified-Since header field, some servers will use an exact date comparison function, rather than a less-than function, for deciding whether to send a 304 (Not Modified) response. To get best results when sending an If- Modified-Since header field for cache validation, clients are advised to use the exact date string received in a previous Last- Modified header field whenever possible. Note: If a client uses an arbitrary date in the If-Modified-Since header field instead of a date taken from the Last-Modified header field for the same request, the client needs to be aware that this date is interpreted in the server's understanding of time. Unsynchronized clocks and rounding problems, due to the different encodings of time between the client and server, are concerns. This includes the possibility of race conditions if the document has changed between the time it was first requested and the If- Modified-Since date of a subsequent request, and the possibility of clock-skew-related problems if the If-Modified-Since date is derived from the client's clock without correction to the server's clock. Corrections for different time bases between client and server are at best approximate due to network latency. The result of a request having both an If-Modified-Since header field and either an If-Match or an If-Unmodified-Since header fields is undefined by this specification. 3.4. If-Unmodified-Since The "If-Unmodified-Since" header field MAY be used to make a request method conditional by modification date: if the selected representation has been modified since the time specified in this field, then the server MUST NOT perform the requested operation and MUST instead respond with the 412 (Precondition Failed) status code. If the selected representation has not been modified since the time specified in this field, the server SHOULD perform the request method as if the If-Unmodified-Since header field were not present. If-Unmodified-Since = HTTP-date An example of the field is: Fielding, et al. Expires July 7, 2012 [Page 18]
Internet-Draft HTTP/1.1, Part 4 January 2012 If-Unmodified-Since: Sat, 29 Oct 1994 19:43:31 GMT If the request normally (i.e., without the If-Unmodified-Since header field) would result in anything other than a 2xx or 412 status code, the If-Unmodified-Since header field SHOULD be ignored. If the specified date is invalid, the header field MUST be ignored. The result of a request having both an If-Unmodified-Since header field and either an If-None-Match or an If-Modified-Since header fields is undefined by this specification. 3.5. If-Range The If-Range header field provides a special conditional request mechanism that is similar to If-Match and If-Unmodified-Since but specific to HTTP range requests. If-Range is defined in Section 5.3 of [Part5]. 4. Status Code Definitions 4.1. 304 Not Modified The 304 status code indicates that a conditional GET request has been received and would have resulted in a 200 (OK) response if it were not for the fact that the condition has evaluated to false. In other words, there is no need for the server to transfer a representation of the target resource because the client's request indicates that it already has a valid representation, as indicated by the 304 response header fields, and is therefore redirecting the client to make use of that stored representation as if it were the payload of a 200 response. The 304 response MUST NOT contain a message-body, and thus is always terminated by the first empty line after the header fields. A 304 response MUST include a Date header field (Section 9.2 of [Part2]) unless the origin server does not have a clock that can provide a reasonable approximation of the current time. If a 200 response to the same request would have included any of the header fields Cache-Control, Content-Location, ETag, Expires, Last-Modified, or Vary, then those same header fields MUST be sent in a 304 response. Since the goal of a 304 response is to minimize information transfer when the recipient already has one or more cached representations, the response SHOULD NOT include representation metadata other than the above listed fields unless said metadata exists for the purpose of guiding cache updates (e.g., future HTTP extensions). Fielding, et al. Expires July 7, 2012 [Page 19]
Internet-Draft HTTP/1.1, Part 4 January 2012 If the recipient of a 304 response does not have a cached representation corresponding to the entity-tag indicated by the 304 response, then the recipient MUST NOT use the 304 to update its own cache. If this conditional request originated with an outbound client, such as a user agent with its own cache sending a conditional GET to a shared proxy, then the 304 response MAY be forwarded to the outbound client. Otherwise, the recipient MUST disregard the 304 response and repeat the request without any preconditions. If a cache uses a received 304 response to update a cache entry, the cache MUST update the entry to reflect any new field values given in the response. 4.2. 412 Precondition Failed The 412 status code indicates that one or more preconditions given in the request header fields evaluated to false when tested on the server. This response code allows the client to place preconditions on the current resource state (its current representations and metadata) and thus prevent the request method from being applied if the target resource is in an unexpected state. 5. IANA Considerations 5.1. Status Code Registration The HTTP Status Code Registry located at <http://www.iana.org/assignments/http-status-codes> shall be updated with the registrations below: +-------+---------------------+-------------+ | Value | Description | Reference | +-------+---------------------+-------------+ | 304 | Not Modified | Section 4.1 | | 412 | Precondition Failed | Section 4.2 | +-------+---------------------+-------------+ 5.2. Header Field Registration The Message Header Field Registry located at <http://www.iana.org/ assignments/message-headers/message-header-index.html> shall be updated with the permanent registrations below (see [RFC3864]): Fielding, et al. Expires July 7, 2012 [Page 20]
Internet-Draft HTTP/1.1, Part 4 January 2012 +---------------------+----------+----------+-------------+ | Header Field Name | Protocol | Status | Reference | +---------------------+----------+----------+-------------+ | ETag | http | standard | Section 2.3 | | If-Match | http | standard | Section 3.1 | | If-Modified-Since | http | standard | Section 3.3 | | If-None-Match | http | standard | Section 3.2 | | If-Unmodified-Since | http | standard | Section 3.4 | | Last-Modified | http | standard | Section 2.2 | +---------------------+----------+----------+-------------+ The change controller is: "IETF (iesg@ietf.org) - Internet Engineering Task Force". 6. Security Considerations No additional security considerations have been identified beyond those applicable to HTTP in general [Part1]. 7. Acknowledgments See Section 11 of [Part1]. 8. References 8.1. Normative References [Part1] Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed., and J. Reschke, Ed., "HTTP/1.1, part 1: URIs, Connections, and Message Parsing", draft-ietf-httpbis-p1-messaging-18 (work in progress), January 2012. [Part2] Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed., and J. Reschke, Ed., "HTTP/1.1, part 2: Message Semantics", draft-ietf-httpbis-p2-semantics-18 (work in progress), January 2012. [Part3] Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed., and J. Reschke, Ed., "HTTP/1.1, part 3: Message Payload and Content Negotiation", draft-ietf-httpbis-p3-payload-18 (work in progress), January 2012. [Part5] Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed., and J. Reschke, Ed., "HTTP/1.1, part 5: Range Requests and Fielding, et al. Expires July 7, 2012 [Page 21]
Internet-Draft HTTP/1.1, Part 4 January 2012 Partial Responses", draft-ietf-httpbis-p5-range-18 (work in progress), January 2012. [Part6] Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP/1.1, part 6: Caching", draft-ietf-httpbis-p6-cache-18 (work in progress), January 2012. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, January 2008. 8.2. Informative References [RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999. [RFC3864] Klyne, G., Nottingham, M., and J. Mogul, "Registration Procedures for Message Header Fields", BCP 90, RFC 3864, September 2004. [RFC4918] Dusseault, L., Ed., "HTTP Extensions for Web Distributed Authoring and Versioning (WebDAV)", RFC 4918, June 2007. Appendix A. Changes from RFC 2616 Allow weak entity-tags in all requests except range requests (Sections 2.1 and 3.2). Change ETag header field ABNF not to use quoted-string, thus avoiding escaping issues. (Section 2.3) Change ABNF productions for header fields to only define the field value. (Section 3) Fielding, et al. Expires July 7, 2012 [Page 22]
Internet-Draft HTTP/1.1, Part 4 January 2012 Appendix B. Collected ABNF ETag = entity-tag HTTP-date = <HTTP-date, defined in [Part2], Section 8> If-Match = "*" / ( *( "," OWS ) entity-tag *( OWS "," [ OWS entity-tag ] ) ) If-Modified-Since = HTTP-date If-None-Match = "*" / ( *( "," OWS ) entity-tag *( OWS "," [ OWS entity-tag ] ) ) If-Unmodified-Since = HTTP-date Last-Modified = HTTP-date OWS = <OWS, defined in [Part1], Section 1.2.2> entity-tag = [ weak ] opaque-tag etagc = "!" / %x23-7E ; '#'-'~' / obs-text obs-text = <obs-text, defined in [Part1], Section 3.2.3> opaque-tag = DQUOTE *etagc DQUOTE weak = %x57.2F ; W/ ABNF diagnostics: ; ETag defined but not used ; If-Match defined but not used ; If-Modified-Since defined but not used ; If-None-Match defined but not used ; If-Unmodified-Since defined but not used ; Last-Modified defined but not used Appendix C. Change Log (to be removed by RFC Editor before publication) C.1. Since RFC 2616 Extracted relevant partitions from [RFC2616]. C.2. Since draft-ietf-httpbis-p4-conditional-00 Closed issues: o <http://tools.ietf.org/wg/httpbis/trac/ticket/35>: "Normative and Informative references" Fielding, et al. Expires July 7, 2012 [Page 23]
Internet-Draft HTTP/1.1, Part 4 January 2012 Other changes: o Move definitions of 304 and 412 condition codes from Part2. C.3. Since draft-ietf-httpbis-p4-conditional-01 Ongoing work on ABNF conversion (<http://tools.ietf.org/wg/httpbis/trac/ticket/36>): o Add explicit references to BNF syntax and rules imported from other parts of the specification. C.4. Since draft-ietf-httpbis-p4-conditional-02 Closed issues: o <http://tools.ietf.org/wg/httpbis/trac/ticket/116>: "Weak ETags on non-GET requests" Ongoing work on IANA Message Header Field Registration (<http://tools.ietf.org/wg/httpbis/trac/ticket/40>): o Reference RFC 3984, and update header field registrations for header fields defined in this document. C.5. Since draft-ietf-httpbis-p4-conditional-03 Closed issues: o <http://tools.ietf.org/wg/httpbis/trac/ticket/71>: "Examples for ETag matching" o <http://tools.ietf.org/wg/httpbis/trac/ticket/124>: "'entity value' undefined" o <http://tools.ietf.org/wg/httpbis/trac/ticket/126>: "bogus 2068 Date header reference" C.6. Since draft-ietf-httpbis-p4-conditional-04 Ongoing work on ABNF conversion (<http://tools.ietf.org/wg/httpbis/trac/ticket/36>): o Use "/" instead of "|" for alternatives. o Introduce new ABNF rules for "bad" whitespace ("BWS"), optional whitespace ("OWS") and required whitespace ("RWS"). Fielding, et al. Expires July 7, 2012 [Page 24]
Internet-Draft HTTP/1.1, Part 4 January 2012 o Rewrite ABNFs to spell out whitespace rules, factor out header field value format definitions. C.7. Since draft-ietf-httpbis-p4-conditional-05 Final work on ABNF conversion (<http://tools.ietf.org/wg/httpbis/trac/ticket/36>): o Add appendix containing collected and expanded ABNF, reorganize ABNF introduction. C.8. Since draft-ietf-httpbis-p4-conditional-06 Closed issues: o <http://tools.ietf.org/wg/httpbis/trac/ticket/153>: "case- sensitivity of etag weakness indicator" C.9. Since draft-ietf-httpbis-p4-conditional-07 Closed issues: o <http://tools.ietf.org/wg/httpbis/trac/ticket/116>: "Weak ETags on non-GET requests" (If-Match still was defined to require strong matching) o <http://tools.ietf.org/wg/httpbis/trac/ticket/198>: "move IANA registrations for optional status codes" C.10. Since draft-ietf-httpbis-p4-conditional-08 No significant changes. C.11. Since draft-ietf-httpbis-p4-conditional-09 No significant changes. C.12. Since draft-ietf-httpbis-p4-conditional-10 Closed issues: o <http://tools.ietf.org/wg/httpbis/trac/ticket/69>: "Clarify 'Requested Variant'" o <http://tools.ietf.org/wg/httpbis/trac/ticket/109>: "Clarify entity / representation / variant terminology" Fielding, et al. Expires July 7, 2012 [Page 25]
Internet-Draft HTTP/1.1, Part 4 January 2012 o <http://tools.ietf.org/wg/httpbis/trac/ticket/220>: "consider removing the 'changes from 2068' sections" C.13. Since draft-ietf-httpbis-p4-conditional-11 None. C.14. Since draft-ietf-httpbis-p4-conditional-12 Closed issues: o <http://tools.ietf.org/wg/httpbis/trac/ticket/224>: "Header Classification" C.15. Since draft-ietf-httpbis-p4-conditional-13 Closed issues: o <http://tools.ietf.org/wg/httpbis/trac/ticket/89>: "If-* and entities" o <http://tools.ietf.org/wg/httpbis/trac/ticket/101>: "Definition of validator weakness" o <http://tools.ietf.org/wg/httpbis/trac/ticket/276>: "untangle ABNFs for header fields" o <http://tools.ietf.org/wg/httpbis/trac/ticket/269>: "ETags and Quotes" C.16. Since draft-ietf-httpbis-p4-conditional-14 None. C.17. Since draft-ietf-httpbis-p4-conditional-15 Closed issues: o <http://tools.ietf.org/wg/httpbis/trac/ticket/304>: "If-Range should be listed when dicussing contexts where L-M can be considered strong" C.18. Since draft-ietf-httpbis-p4-conditional-16 Closed issues: o <http://tools.ietf.org/wg/httpbis/trac/ticket/186>: "Document HTTP's error-handling philosophy" Fielding, et al. Expires July 7, 2012 [Page 26]
Internet-Draft HTTP/1.1, Part 4 January 2012 C.19. Since draft-ietf-httpbis-p4-conditional-17 Closed issues: o <http://tools.ietf.org/wg/httpbis/trac/ticket/306>: "does etag value really use quoted-string" Index 3 304 Not Modified (status code) 19 4 412 Precondition Failed (status code) 20 E ETag header field 10 G Grammar entity-tag 10 ETag 10 etagc 10 If-Match 15 If-Modified-Since 17 If-None-Match 16 If-Unmodified-Since 18 Last-Modified 8 opaque-tag 10 weak 10 H Header Fields ETag 10 If-Match 15 If-Modified-Since 17 If-None-Match 16 If-Unmodified-Since 18 Last-Modified 8 I If-Match header field 15 If-Modified-Since header field 17 If-None-Match header field 16 If-Unmodified-Since header field 18 L Last-Modified header field 8 Fielding, et al. Expires July 7, 2012 [Page 27]
Internet-Draft HTTP/1.1, Part 4 January 2012 M metadata 6 S selected representation 5 Status Codes 304 Not Modified 19 412 Precondition Failed 20 V validator 6 strong 6 weak 6 Authors' Addresses Roy T. Fielding (editor) Adobe Systems Incorporated 345 Park Ave San Jose, CA 95110 USA EMail: fielding@gbiv.com URI: http://roy.gbiv.com/ Jim Gettys Alcatel-Lucent Bell Labs 21 Oak Knoll Road Carlisle, MA 01741 USA EMail: jg@freedesktop.org URI: http://gettys.wordpress.com/ Jeffrey C. Mogul Hewlett-Packard Company HP Labs, Large Scale Systems Group 1501 Page Mill Road, MS 1177 Palo Alto, CA 94304 USA EMail: JeffMogul@acm.org Fielding, et al. Expires July 7, 2012 [Page 28]
Internet-Draft HTTP/1.1, Part 4 January 2012 Henrik Frystyk Nielsen Microsoft Corporation 1 Microsoft Way Redmond, WA 98052 USA EMail: henrikn@microsoft.com Larry Masinter Adobe Systems Incorporated 345 Park Ave San Jose, CA 95110 USA EMail: LMM@acm.org URI: http://larry.masinter.net/ Paul J. Leach Microsoft Corporation 1 Microsoft Way Redmond, WA 98052 EMail: paulle@microsoft.com Tim Berners-Lee World Wide Web Consortium MIT Computer Science and Artificial Intelligence Laboratory The Stata Center, Building 32 32 Vassar Street Cambridge, MA 02139 USA EMail: timbl@w3.org URI: http://www.w3.org/People/Berners-Lee/ Fielding, et al. Expires July 7, 2012 [Page 29]
Internet-Draft HTTP/1.1, Part 4 January 2012 Yves Lafon (editor) World Wide Web Consortium W3C / ERCIM 2004, rte des Lucioles Sophia-Antipolis, AM 06902 France EMail: ylafon@w3.org URI: http://www.raubacapeu.net/people/yves/ Julian F. Reschke (editor) greenbytes GmbH Hafenweg 16 Muenster, NW 48155 Germany Phone: +49 251 2807760 Fax: +49 251 2807761 EMail: julian.reschke@greenbytes.de URI: http://greenbytes.de/tech/webdav/ Fielding, et al. Expires July 7, 2012 [Page 30]