NETCONF Working Group K. Watsen
Internet-Draft Juniper Networks
Intended status: Standards Track G. Wu
Expires: May 3, 2018 Cisco Networks
October 30, 2017
NETCONF Client and Server Models
draft-ietf-netconf-netconf-client-server-05
Abstract
This document defines two YANG modules, one module to configure a
NETCONF client and the other module to configure a NETCONF server.
Both modules support both the SSH and TLS transport protocols, and
support both standard NETCONF and NETCONF Call Home connections.
Editorial Note (To be removed by RFC Editor)
This draft contains many placeholder values that need to be replaced
with finalized values at the time of publication. This note
summarizes all of the substitutions that are needed. No other RFC
Editor instructions are specified elsewhere in this document.
This document contains references to other drafts in progress, both
in the Normative References section, as well as in body text
throughout. Please update the following references to reflect their
final RFC assignments:
o I-D.ietf-netconf-keystore
o I-D.ietf-netconf-ssh-client-server
o I-D.ietf-netconf-tls-client-server
Artwork in this document contains shorthand references to drafts in
progress. Please apply the following replacements:
o "XXXX" --> the assigned RFC value for this draft
o "YYYY" --> the assigned RFC value for I-D.ietf-netconf-ssh-client-
server
o "ZZZZ" --> the assigned RFC value for I-D.ietf-netconf-tls-client-
server
Artwork in this document contains placeholder values for the date of
publication of this draft. Please apply the following replacement:
Watsen & Wu Expires May 3, 2018 [Page 1]
Internet-Draft NETCONF Client and Server Models October 2017
o "2017-10-30" --> the publication date of this draft
The following Appendix section is to be removed prior to publication:
o Appendix A. Change Log
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on May 3, 2018.
Copyright Notice
Copyright (c) 2017 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. The NETCONF Client Model . . . . . . . . . . . . . . . . . . 4
3.1. Tree Diagram . . . . . . . . . . . . . . . . . . . . . . 4
3.2. Example Usage . . . . . . . . . . . . . . . . . . . . . . 10
3.3. YANG Module . . . . . . . . . . . . . . . . . . . . . . . 11
4. The NETCONF Server Model . . . . . . . . . . . . . . . . . . 22
4.1. Tree Diagram . . . . . . . . . . . . . . . . . . . . . . 22
Watsen & Wu Expires May 3, 2018 [Page 2]
Internet-Draft NETCONF Client and Server Models October 2017
4.2. Example Usage . . . . . . . . . . . . . . . . . . . . . . 28
4.3. YANG Module . . . . . . . . . . . . . . . . . . . . . . . 33
5. Design Considerations . . . . . . . . . . . . . . . . . . . . 44
5.1. Support all NETCONF transports . . . . . . . . . . . . . 44
5.2. Enable each transport to select which keys to use . . . . 45
5.3. Support authenticating NETCONF clients certificates . . . 45
5.4. Support mapping authenticated NETCONF client certificates
to usernames . . . . . . . . . . . . . . . . . . . . . . 45
5.5. Support both listening for connections and call home . . 45
5.6. For Call Home connections . . . . . . . . . . . . . . . . 45
5.6.1. Support more than one NETCONF client . . . . . . . . 45
5.6.2. Support NETCONF clients having more than one endpoint 46
5.6.3. Support a reconnection strategy . . . . . . . . . . . 46
5.6.4. Support both persistent and periodic connections . . 46
5.6.5. Reconnection strategy for periodic connections . . . 46
5.6.6. Keep-alives for persistent connections . . . . . . . 46
5.6.7. Customizations for periodic connections . . . . . . . 47
6. Security Considerations . . . . . . . . . . . . . . . . . . . 47
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 48
7.1. The IETF XML Registry . . . . . . . . . . . . . . . . . . 48
7.2. The YANG Module Names Registry . . . . . . . . . . . . . 48
8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 49
9. References . . . . . . . . . . . . . . . . . . . . . . . . . 49
9.1. Normative References . . . . . . . . . . . . . . . . . . 49
9.2. Informative References . . . . . . . . . . . . . . . . . 50
Appendix A. Change Log . . . . . . . . . . . . . . . . . . . . . 51
A.1. 00 to 01 . . . . . . . . . . . . . . . . . . . . . . . . 51
A.2. 01 to 02 . . . . . . . . . . . . . . . . . . . . . . . . 51
A.3. 02 to 03 . . . . . . . . . . . . . . . . . . . . . . . . 51
A.4. 03 to 04 . . . . . . . . . . . . . . . . . . . . . . . . 51
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 51
1. Introduction
This document defines two YANG [RFC7950] modules, one module to
configure a NETCONF [RFC6241] client and the other module to
configure a NETCONF server. Both modules support both NETCONF over
SSH [RFC6242] and NETCONF over TLS [RFC7589] and NETCONF Call Home
connections [RFC8071].
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
Watsen & Wu Expires May 3, 2018 [Page 3]
Internet-Draft NETCONF Client and Server Models October 2017
3. The NETCONF Client Model
The NETCONF client model presented in this section supports both
clients initiating connections to servers, as well as clients
listening for connections from servers calling home.
This model supports both the SSH and TLS transport protocols, using
the SSH client and TLS client groupings defined in
[I-D.ietf-netconf-ssh-client-server] and
[I-D.ietf-netconf-tls-client-server] respectively.
All private keys and trusted certificates are held in the keystore
model defined in [I-D.ietf-netconf-keystore].
YANG feature statements are used to enable implementations to
advertise which parts of the model the NETCONF client supports.
3.1. Tree Diagram
The following tree diagram [I-D.ietf-netmod-yang-tree-diagrams]
provides an overview of the data model for the "ietf-netconf-client"
module. Just the container is displayed below, but there is also a
reuable grouping by the same name that the container is using.
[ note: '\' line wrapping for formatting only]
module: ietf-netconf-client
+--rw netconf-client
+--rw initiate {initiate}?
| +--rw netconf-server* [name]
| +--rw name string
| +--rw endpoints
| | +--rw endpoint* [name]
| | +--rw name string
| | +--rw (transport)
| | +--:(ssh) {ssh-initiate}?
| | | +--rw ssh
| | | +--rw address? inet:host
| | | +--rw port? inet:port-numbe\
r
| | | +--rw client-identity
| | | | +--rw username? string
| | | | +--rw (auth-type)
| | | | +--:(certificate)
| | | | | +--rw certificate
| | | | | {sshcom:ssh-x509-certs}?\
| | | | | +--rw algorithm?
Watsen & Wu Expires May 3, 2018 [Page 4]
Internet-Draft NETCONF Client and Server Models October 2017
| | | | | | identityref
| | | | | +--rw private-key?
| | | | | | union
| | | | | +--rw public-key?
| | | | | | binary
| | | | | +---x generate-private-key
| | | | | | +---w input
| | | | | | +---w algorithm
| | | | | | identityref
| | | | | +--rw certificates
| | | | | | +--rw certificate* [name]
| | | | | | +--rw name string
| | | | | | +--rw value? binary
| | | | | +---x generate-certificate-si\
gning-request
| | | | | +---w input
| | | | | | +---w subject
| | | | | | | binary
| | | | | | +---w attributes?
| | | | | | binary
| | | | | +--ro output
| | | | | +--ro certificate-signi\
ng-request
| | | | | binary
| | | | +--:(public-key)
| | | | | +--rw public-key
| | | | | +--rw algorithm?
| | | | | | identityref
| | | | | +--rw private-key?
| | | | | | union
| | | | | +--rw public-key?
| | | | | | binary
| | | | | +---x generate-private-key
| | | | | +---w input
| | | | | +---w algorithm
| | | | | identityref
| | | | +--:(password)
| | | | +--rw password? string
| | | +--rw server-auth
| | | | +--rw pinned-ssh-host-keys?
| | | | | ks:pinned-host-keys
| | | | +--rw pinned-ca-certs?
| | | | | ks:pinned-certificates
| | | | | {sshcom:ssh-x509-certs}?
| | | | +--rw pinned-server-certs?
| | | | ks:pinned-certificates
| | | | {sshcom:ssh-x509-certs}?
| | | +--rw transport-params
Watsen & Wu Expires May 3, 2018 [Page 5]
Internet-Draft NETCONF Client and Server Models October 2017
| | | {ssh-client-transport-params-conf\
ig}?
| | | +--rw host-key
| | | | +--rw host-key-alg* identityref
| | | +--rw key-exchange
| | | | +--rw key-exchange-alg* identityr\
ef
| | | +--rw encryption
| | | | +--rw encryption-alg* identityref\
| | | +--rw mac
| | | | +--rw mac-alg* identityref
| | | +--rw compression
| | | +--rw compression-alg* identityre\
f
| | +--:(tls) {tls-initiate}?
| | +--rw tls
| | +--rw address? inet:host
| | +--rw port? inet:port-number\
| | +--rw client-identity
| | | +--rw (auth-type)
| | | +--:(certificate)
| | | +--rw certificate
| | | +--rw algorithm?
| | | | identityref
| | | +--rw private-key?
| | | | union
| | | +--rw public-key?
| | | | binary
| | | +---x generate-private-key
| | | | +---w input
| | | | +---w algorithm
| | | | identityref
| | | +--rw certificates
| | | | +--rw certificate* [name]
| | | | +--rw name string
| | | | +--rw value? binary
| | | +---x generate-certificate-si\
gning-request
| | | +---w input
| | | | +---w subject
| | | | | binary
| | | | +---w attributes?
| | | | binary
| | | +--ro output
| | | +--ro certificate-signi\
ng-request
Watsen & Wu Expires May 3, 2018 [Page 6]
Internet-Draft NETCONF Client and Server Models October 2017
| | | binary
| | +--rw server-auth
| | | +--rw pinned-ca-certs?
| | | | ks:pinned-certificates
| | | +--rw pinned-server-certs?
| | | ks:pinned-certificates
| | +--rw hello-params
| | {tls-client-hello-params-config}?\
| | +--rw tls-versions
| | | +--rw tls-version* identityref
| | +--rw cipher-suites
| | +--rw cipher-suite* identityref
| +--rw connection-type
| | +--rw (connection-type)?
| | +--:(persistent-connection)
| | | +--rw persistent!
| | | +--rw idle-timeout? uint32
| | | +--rw keep-alives
| | | +--rw max-wait? uint16
| | | +--rw max-attempts? uint8
| | +--:(periodic-connection)
| | +--rw periodic!
| | +--rw idle-timeout? uint16
| | +--rw reconnect-timeout? uint16
| +--rw reconnect-strategy
| +--rw start-with? enumeration
| +--rw max-attempts? uint8
+--rw listen {listen}?
+--rw idle-timeout? uint16
+--rw endpoint* [name]
+--rw name string
+--rw (transport)
+--:(ssh) {ssh-listen}?
| +--rw ssh
| +--rw address? inet:ip-address
| +--rw port? inet:port-number
| +--rw client-identity
| | +--rw username? string
| | +--rw (auth-type)
| | +--:(certificate)
| | | +--rw certificate
| | | {sshcom:ssh-x509-certs}?
| | | +--rw algorithm?
| | | | identityref
| | | +--rw private-key?
| | | | union
| | | +--rw public-key?
Watsen & Wu Expires May 3, 2018 [Page 7]
Internet-Draft NETCONF Client and Server Models October 2017
| | | | binary
| | | +---x generate-private-key
| | | | +---w input
| | | | +---w algorithm identityre\
f
| | | +--rw certificates
| | | | +--rw certificate* [name]
| | | | +--rw name string
| | | | +--rw value? binary
| | | +---x generate-certificate-signing-\
request
| | | +---w input
| | | | +---w subject binary
| | | | +---w attributes? binary
| | | +--ro output
| | | +--ro certificate-signing-req\
uest
| | | binary
| | +--:(public-key)
| | | +--rw public-key
| | | +--rw algorithm?
| | | | identityref
| | | +--rw private-key? union\
| | | +--rw public-key? binar\
y
| | | +---x generate-private-key
| | | +---w input
| | | +---w algorithm identityre\
f
| | +--:(password)
| | +--rw password? string
| +--rw server-auth
| | +--rw pinned-ssh-host-keys?
| | | ks:pinned-host-keys
| | +--rw pinned-ca-certs?
| | | ks:pinned-certificates
| | | {sshcom:ssh-x509-certs}?
| | +--rw pinned-server-certs?
| | ks:pinned-certificates
| | {sshcom:ssh-x509-certs}?
| +--rw transport-params
| {ssh-client-transport-params-config}?
| +--rw host-key
| | +--rw host-key-alg* identityref
| +--rw key-exchange
| | +--rw key-exchange-alg* identityref
| +--rw encryption
Watsen & Wu Expires May 3, 2018 [Page 8]
Internet-Draft NETCONF Client and Server Models October 2017
| | +--rw encryption-alg* identityref
| +--rw mac
| | +--rw mac-alg* identityref
| +--rw compression
| +--rw compression-alg* identityref
+--:(tls) {tls-listen}?
+--rw tls
+--rw address? inet:ip-address
+--rw port? inet:port-number
+--rw client-identity
| +--rw (auth-type)
| +--:(certificate)
| +--rw certificate
| +--rw algorithm?
| | identityref
| +--rw private-key?
| | union
| +--rw public-key?
| | binary
| +---x generate-private-key
| | +---w input
| | +---w algorithm identityre\
f
| +--rw certificates
| | +--rw certificate* [name]
| | +--rw name string
| | +--rw value? binary
| +---x generate-certificate-signing-\
request
| +---w input
| | +---w subject binary
| | +---w attributes? binary
| +--ro output
| +--ro certificate-signing-req\
uest
| binary
+--rw server-auth
| +--rw pinned-ca-certs?
| | ks:pinned-certificates
| +--rw pinned-server-certs?
| ks:pinned-certificates
+--rw hello-params
{tls-client-hello-params-config}?
+--rw tls-versions
| +--rw tls-version* identityref
+--rw cipher-suites
+--rw cipher-suite* identityref
Watsen & Wu Expires May 3, 2018 [Page 9]
Internet-Draft NETCONF Client and Server Models October 2017
3.2. Example Usage
The following example illustrates configuring a NETCONF client to
initiate connections, using both the SSH and TLS transport protocols,
as well as listening for call-home connections, again using both the
SSH and TLS transport protocols.
This example is consistent with the examples presented in Section 2.2
of [I-D.ietf-netconf-keystore].
[ note: '\' line wrapping for formatting only]
<netconf-client
xmlns="urn:ietf:params:xml:ns:yang:ietf-netconf-client">
<!-- NETCONF servers to initiate connections to -->
<initiate>
<netconf-server>
<name>corp-fw1</name>
<endpoints>
<endpoint>
<name>corp-fw1.example.com</name>
<ssh>
<address>corp-fw1.example.com</address>
<client-identity>
<username>foobar</username>
<public-key>
<algorithm xmlns:ks="urn:ietf:params:xml:ns:yang:ietf\
-keystore">ks:secp521r1</algorithm>
<private-key>base64encodedvalue==</private-key>
<public-key>base64encodedvalue==</public-key>
</public-key>
</client-identity>
<server-auth>
<pinned-server-certs>deployment-specific-ca-certs</pinn\
ed-server-certs>
</server-auth>
</ssh>
</endpoint>
<endpoint>
<name>corp-fw2.example.com</name>
<ssh>
<address>corp-fw2.example.com</address>
<client-identity>
<username>foobar</username>
<public-key>
<algorithm xmlns:ks="urn:ietf:params:xml:ns:yang:ietf\
-keystore">ks:secp521r1</algorithm>
Watsen & Wu Expires May 3, 2018 [Page 10]
Internet-Draft NETCONF Client and Server Models October 2017
<private-key>base64encodedvalue==</private-key>
<public-key>base64encodedvalue==</public-key>
</public-key>
</client-identity>
<server-auth>
<pinned-server-certs>deployment-specific-ca-certs</pinn\
ed-server-certs>
</server-auth>
</ssh>
</endpoint>
</endpoints>
</netconf-server>
</initiate>
<!-- endpoints to listen for NETCONF Call Home connections on -->
<listen>
<endpoint>
<name>Intranet-facing listener</name>
<ssh>
<address>192.0.2.7</address>
<client-identity>
<username>foobar</username>
<public-key>
<algorithm xmlns:ks="urn:ietf:params:xml:ns:yang:ietf-key\
store">ks:secp521r1</algorithm>
<private-key>base64encodedvalue==</private-key>
<public-key>base64encodedvalue==</public-key>
</public-key>
</client-identity>
<server-auth>
<pinned-ca-certs>deployment-specific-ca-certs</pinned-ca-ce\
rts>
<pinned-server-certs>explicitly-trusted-server-certs</pinne\
d-server-certs>
<pinned-ssh-host-keys>explicitly-trusted-ssh-host-keys</pin\
ned-ssh-host-keys>
</server-auth>
</ssh>
</endpoint>
</listen>
</netconf-client>
3.3. YANG Module
This YANG module imports YANG types from [RFC6991], and YANG
groupings from [I-D.ietf-netconf-ssh-client-server] and
[I-D.ietf-netconf-ssh-client-server].
Watsen & Wu Expires May 3, 2018 [Page 11]
Internet-Draft NETCONF Client and Server Models October 2017
<CODE BEGINS> file "ietf-netconf-client@2017-10-30.yang"
module ietf-netconf-client {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-netconf-client";
prefix "ncc";
import ietf-inet-types {
prefix inet;
reference
"RFC 6991: Common YANG Data Types";
}
import ietf-ssh-client {
prefix ss;
revision-date 2017-10-30; // stable grouping definitions
reference
"RFC YYYY: YANG Groupings for SSH Clients and SSH Servers";
}
import ietf-tls-client {
prefix ts;
revision-date 2017-10-30; // stable grouping definitions
reference
"RFC ZZZZ: YANG Groupings for TLS Clients and TLS Servers";
}
organization
"IETF NETCONF (Network Configuration) Working Group";
contact
"WG Web: <http://tools.ietf.org/wg/netconf/>
WG List: <mailto:netconf@ietf.org>
Author: Kent Watsen
<mailto:kwatsen@juniper.net>
Author: Gary Wu
<mailto:garywu@cisco.com>";
description
"This module contains a collection of YANG definitions for
configuring NETCONF clients.
Copyright (c) 2017 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Watsen & Wu Expires May 3, 2018 [Page 12]
Internet-Draft NETCONF Client and Server Models October 2017
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision "2017-10-30" {
description
"Initial version";
reference
"RFC XXXX: NETCONF Client and Server Models";
}
// Features
feature initiate {
description
"The 'initiate' feature indicates that the NETCONF client
supports initiating NETCONF connections to NETCONF servers
using at least one transport (e.g., SSH, TLS, etc.).";
}
feature ssh-initiate {
description
"The 'ssh-initiate' feature indicates that the NETCONF client
supports initiating SSH connections to NETCONF servers.";
reference
"RFC 6242: Using the NETCONF Protocol over Secure Shell (SSH)";
}
feature tls-initiate {
description
"The 'tls-initiate' feature indicates that the NETCONF client
supports initiating TLS connections to NETCONF servers.";
reference
"RFC 7589: Using the NETCONF Protocol over Transport
Layer Security (TLS) with Mutual X.509
Authentication";
}
feature listen {
description
"The 'listen' feature indicates that the NETCONF client
supports opening a port to accept NETCONF server call
Watsen & Wu Expires May 3, 2018 [Page 13]
Internet-Draft NETCONF Client and Server Models October 2017
home connections using at least one transport (e.g.,
SSH, TLS, etc.).";
}
feature ssh-listen {
description
"The 'ssh-listen' feature indicates that the NETCONF client
supports opening a port to listen for incoming NETCONF
server call-home SSH connections.";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call Home";
}
feature tls-listen {
description
"The 'tls-listen' feature indicates that the NETCONF client
supports opening a port to listen for incoming NETCONF
server call-home TLS connections.";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call Home";
}
container netconf-client {
uses netconf-client;
description
"Top-level container for NETCONF client configuration.";
}
grouping netconf-client {
description
"Top-level grouping for NETCONF client configuration.";
container initiate {
if-feature initiate;
description
"Configures client initiating underlying TCP connections.";
list netconf-server {
key name;
min-elements 1;
description
"List of NETCONF servers the NETCONF client is to initiate
connections to in parallel.";
leaf name {
type string;
description
"An arbitrary name for the NETCONF server.";
}
container endpoints {
Watsen & Wu Expires May 3, 2018 [Page 14]
Internet-Draft NETCONF Client and Server Models October 2017
description
"Container for the list of endpoints.";
list endpoint {
key name;
min-elements 1;
ordered-by user;
description
"A user-ordered list of endpoints that the NETCONF
client will attempt to connect to in the specified
sequence. Defining more than one enables
high-availability.";
leaf name {
type string;
description
"An arbitrary name for the endpoint.";
}
choice transport {
mandatory true;
description
"Selects between available transports.";
case ssh {
if-feature ssh-initiate;
container ssh {
description
"Specifies IP and SSH specific configuration for
the connection.";
leaf address {
type inet:host;
description
"The IP address or hostname of the endpoint.
If a domain name is configured, then the DNS
resolution should happen on each usage attempt.
If the DNS resolution results in multiple IP
addresses, the IP addresses will be tried
according to local preference order until a
connection has been established or until all
IP addresses have failed.";
}
leaf port {
type inet:port-number;
default 830;
description
"The IP port for this endpoint. The NETCONF
client will use the IANA-assigned well-known
port for 'netconf-ssh' (830) if no value is
specified.";
}
uses ss:ssh-client-grouping;
Watsen & Wu Expires May 3, 2018 [Page 15]
Internet-Draft NETCONF Client and Server Models October 2017
}
} // end ssh
case tls {
if-feature tls-initiate;
container tls {
description
"Specifies IP and TLS specific configuration for
the connection.";
leaf address {
type inet:host;
description
"The IP address or hostname of the endpoint.
If a domain name is configured, then the DNS
resolution should happen on each usage attempt.
If the DNS resolution results in multiple IP
addresses, the IP addresses will be tried
according to local preference order until a
connection has been established or until all
IP addresses have failed.";
}
leaf port {
type inet:port-number;
default 6513;
description
"The IP port for this endpoint. The NETCONF
client will use the IANA-assigned well-known
port for 'netconf-tls' (6513) if no value is
specified.";
}
uses ts:tls-client-grouping {
refine "client-identity/auth-type" {
mandatory true;
description
"NETCONF/TLS clients MUST pass some
authentication credentials.";
}
}
}
} // end tls
}
}
}
container connection-type {
description
"Indicates the kind of connection to use.";
choice connection-type {
description
Watsen & Wu Expires May 3, 2018 [Page 16]
Internet-Draft NETCONF Client and Server Models October 2017
"Selects between available connection types.";
case persistent-connection {
container persistent {
presence true;
description
"Maintain a persistent connection to the NETCONF
server. If the connection goes down, immediately
start trying to reconnect to it, using the
reconnection strategy.
This connection type minimizes any NETCONF server
to NETCONF client data-transfer delay, albeit at
the expense of holding resources longer.";
leaf idle-timeout {
type uint32;
units "seconds";
default 86400; // one day;
description
"Specifies the maximum number of seconds that a
a NETCONF session may remain idle. A NETCONF
session will be dropped if it is idle for an
interval longer than this number of seconds.
If set to zero, then the client will never drop
a session because it is idle. Sessions that
have a notification subscription active are
never dropped.";
}
container keep-alives {
description
"Configures the keep-alive policy, to proactively
test the aliveness of the SSH/TLS server. An
unresponsive SSH/TLS server will be dropped after
approximately max-attempts * max-wait seconds.";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call
Home, Section 3.1, item S6";
leaf max-wait {
type uint16 {
range "1..max";
}
units seconds;
default 30;
description
"Sets the amount of time in seconds after which
if no data has been received from the SSH/TLS
server, a SSH/TLS-level message will be sent
to test the aliveness of the SSH/TLS server.";
}
Watsen & Wu Expires May 3, 2018 [Page 17]
Internet-Draft NETCONF Client and Server Models October 2017
leaf max-attempts {
type uint8;
default 3;
description
"Sets the maximum number of sequential keep-alive
messages that can fail to obtain a response from
the SSH/TLS server before assuming the SSH/TLS
server is no longer alive.";
}
}
}
}
case periodic-connection {
container periodic {
presence true;
description
"Periodically connect to the NETCONF server, so that
the NETCONF server may deliver messages pending for
the NETCONF client. The NETCONF server must close
the connection when it is ready to release it. Once
the connection has been closed, the NETCONF client
will restart its timer until the next connection.";
leaf idle-timeout {
type uint16;
units "seconds";
default 300; // five minutes
description
"Specifies the maximum number of seconds that a
a NETCONF session may remain idle. A NETCONF
session will be dropped if it is idle for an
interval longer than this number of seconds.
If set to zero, then the server will never drop
a session because it is idle. Sessions that
have a notification subscription active are
never dropped.";
}
leaf reconnect-timeout {
type uint16 {
range "1..max";
}
units minutes;
default 60;
description
"Sets the maximum amount of unconnected time the
NETCONF client will wait before re-establishing
a connection to the NETCONF server. The NETCONF
client may initiate a connection before this
time if desired (e.g., to set configuration).";
Watsen & Wu Expires May 3, 2018 [Page 18]
Internet-Draft NETCONF Client and Server Models October 2017
}
}
}
}
}
container reconnect-strategy {
description
"The reconnection strategy directs how a NETCONF client
reconnects to a NETCONF server, after discovering its
connection to the server has dropped, even if due to a
reboot. The NETCONF client starts with the specified
endpoint and tries to connect to it max-attempts times
before trying the next endpoint in the list (round
robin).";
leaf start-with {
type enumeration {
enum first-listed {
description
"Indicates that reconnections should start with
the first endpoint listed.";
}
enum last-connected {
description
"Indicates that reconnections should start with
the endpoint last connected to. If no previous
connection has ever been established, then the
first endpoint configured is used. NETCONF
clients SHOULD be able to remember the last
endpoint connected to across reboots.";
}
}
default first-listed;
description
"Specifies which of the NETCONF server's endpoints the
NETCONF client should start with when trying to connect
to the NETCONF server.";
}
leaf max-attempts {
type uint8 {
range "1..max";
}
default 3;
description
"Specifies the number times the NETCONF client tries to
connect to a specific endpoint before moving on to the
next endpoint in the list (round robin).";
}
}
Watsen & Wu Expires May 3, 2018 [Page 19]
Internet-Draft NETCONF Client and Server Models October 2017
} // end netconf-server
} // end initiate
container listen {
if-feature listen;
description
"Configures client accepting call-home TCP connections.";
leaf idle-timeout {
type uint16;
units "seconds";
default 3600; // one hour
description
"Specifies the maximum number of seconds that a NETCONF
session may remain idle. A NETCONF session will be dropped
if it is idle for an interval longer than this number of
seconds. If set to zero, then the server will never drop
a session because it is idle. Sessions that have a
notification subscription active are never dropped.";
}
list endpoint {
key name;
min-elements 1;
description
"List of endpoints to listen for NETCONF connections.";
leaf name {
type string;
description
"An arbitrary name for the NETCONF listen endpoint.";
}
choice transport {
mandatory true;
description
"Selects between available transports.";
case ssh {
if-feature ssh-listen;
container ssh {
description
"SSH-specific listening configuration for inbound
connections.";
leaf address {
type inet:ip-address;
description
"The IP address to listen on for incoming call-home
connections. The NETCONF client will listen on
all configured interfaces if no value is specified.
INADDR_ANY (0.0.0.0) or INADDR6_ANY (0:0:0:0:0:0:0:0
Watsen & Wu Expires May 3, 2018 [Page 20]
Internet-Draft NETCONF Client and Server Models October 2017
a.k.a. ::) MUST be used when the server is to listen
on all IPv4 or IPv6 addresses, respectively.";
}
leaf port {
type inet:port-number;
default 4334;
description
"The port number to listen on for call-home
connections. The NETCONF client will listen on the
IANA-assigned well-known port for 'netconf-ch-ssh'
(4334) if no value is specified.";
}
uses ss:ssh-client-grouping;
}
}
case tls {
if-feature tls-listen;
container tls {
description
"TLS-specific listening configuration for inbound
connections.";
leaf address {
type inet:ip-address;
description
"The IP address to listen on for incoming call-home
connections. The NETCONF client will listen on
all configured interfaces if no value is specified.
INADDR_ANY (0.0.0.0) or INADDR6_ANY (0:0:0:0:0:0:0:0
a.k.a. ::) MUST be used when the server is to listen
on all IPv4 or IPv6 addresses, respectively.";
}
leaf port {
type inet:port-number;
default 4335;
description
"The port number to listen on for call-home
connections. The NETCONF client will listen on the
IANA-assigned well-known port for 'netconf-ch-tls'
(4335) if no value is specified.";
}
uses ts:tls-client-grouping {
refine "client-identity/auth-type" {
mandatory true;
description
"NETCONF/TLS clients MUST pass some authentication
credentials.";
}
}
Watsen & Wu Expires May 3, 2018 [Page 21]
Internet-Draft NETCONF Client and Server Models October 2017
}
}
} // end transport
} // end endpoint
} // end listen
} // end netconf-client
}
<CODE ENDS>
4. The NETCONF Server Model
The NETCONF server model presented in this section supports servers
both listening for connections as well as initiating call-home
connections.
This model supports both the SSH and TLS transport protocols, using
the SSH server and TLS server groupings defined in
[I-D.ietf-netconf-ssh-client-server] and
[I-D.ietf-netconf-tls-client-server] respectively.
All private keys and trusted certificates are held in the keystore
model defined in [I-D.ietf-netconf-keystore].
YANG feature statements are used to enable implementations to
advertise which parts of the model the NETCONF server supports.
4.1. Tree Diagram
The following tree diagram [I-D.ietf-netmod-yang-tree-diagrams]
provides an overview of the data model for the "ietf-netconf-server"
module. Just the container is displayed below, but there is also a
reuable grouping by the same name that the container is using.
[ note: '\' line wrapping for formatting only]
module: ietf-netconf-server
+--rw netconf-server
+--rw listen {listen}?
| +--rw idle-timeout? uint16
| +--rw endpoint* [name]
| +--rw name string
| +--rw (transport)
| +--:(ssh) {ssh-listen}?
| | +--rw ssh
| | +--rw address inet:ip-address
| | +--rw port? inet:port-number
| | +--rw server-identity
Watsen & Wu Expires May 3, 2018 [Page 22]
Internet-Draft NETCONF Client and Server Models October 2017
| | | +--rw host-key* [name]
| | | +--rw name string
| | | +--rw (host-key-type)
| | | +--:(public-key)
| | | | +--rw public-key
| | | | +--rw algorithm?
| | | | | identityref
| | | | +--rw private-key?
| | | | | union
| | | | +--rw public-key?
| | | | | binary
| | | | +---x generate-private-key
| | | | +---w input
| | | | +---w algorithm
| | | | identityref
| | | +--:(certificate)
| | | +--rw certificate
| | | {sshcom:ssh-x509-certs}?
| | | +--rw algorithm?
| | | | identityref
| | | +--rw private-key?
| | | | union
| | | +--rw public-key?
| | | | binary
| | | +---x generate-private-key
| | | | +---w input
| | | | +---w algorithm
| | | | identityref
| | | +--rw certificates
| | | | +--rw certificate* [name]
| | | | +--rw name string
| | | | +--rw value? binary
| | | +---x generate-certificate-signi\
ng-request
| | | +---w input
| | | | +---w subject binary\
| | | | +---w attributes? binary\
| | | +--ro output
| | | +--ro certificate-signing-\
request
| | | binary
| | +--rw client-cert-auth {sshcom:ssh-x509-certs}?\
| | | +--rw pinned-ca-certs?
| | | | ks:pinned-certificates
| | | +--rw pinned-client-certs?
Watsen & Wu Expires May 3, 2018 [Page 23]
Internet-Draft NETCONF Client and Server Models October 2017
| | | ks:pinned-certificates
| | +--rw transport-params
| | {ssh-server-transport-params-config}?
| | +--rw host-key
| | | +--rw host-key-alg* identityref
| | +--rw key-exchange
| | | +--rw key-exchange-alg* identityref
| | +--rw encryption
| | | +--rw encryption-alg* identityref
| | +--rw mac
| | | +--rw mac-alg* identityref
| | +--rw compression
| | +--rw compression-alg* identityref
| +--:(tls) {tls-listen}?
| +--rw tls
| +--rw address inet:ip-address
| +--rw port? inet:port-number
| +--rw server-identity
| | +--rw algorithm?
| | | identityref
| | +--rw private-key?
| | | union
| | +--rw public-key?
| | | binary
| | +---x generate-private-key
| | | +---w input
| | | +---w algorithm identityref
| | +--rw certificates
| | | +--rw certificate* [name]
| | | +--rw name string
| | | +--rw value? binary
| | +---x generate-certificate-signing-request
| | +---w input
| | | +---w subject binary
| | | +---w attributes? binary
| | +--ro output
| | +--ro certificate-signing-request
| | binary
| +--rw client-auth
| | +--rw pinned-ca-certs?
| | | ks:pinned-certificates
| | +--rw pinned-client-certs?
| | | ks:pinned-certificates
| | +--rw cert-maps
| | +--rw cert-to-name* [id]
| | +--rw id uint32
| | +--rw fingerprint
| | | x509c2n:tls-fingerprint
Watsen & Wu Expires May 3, 2018 [Page 24]
Internet-Draft NETCONF Client and Server Models October 2017
| | +--rw map-type identityref
| | +--rw name string
| +--rw hello-params
| {tls-server-hello-params-config}?
| +--rw tls-versions
| | +--rw tls-version* identityref
| +--rw cipher-suites
| +--rw cipher-suite* identityref
+--rw call-home {call-home}?
+--rw netconf-client* [name]
+--rw name string
+--rw endpoints
| +--rw endpoint* [name]
| +--rw name string
| +--rw (transport)
| +--:(ssh) {ssh-call-home}?
| | +--rw ssh
| | +--rw address inet:host
| | +--rw port? inet:port-numbe\
r
| | +--rw server-identity
| | | +--rw host-key* [name]
| | | +--rw name string
| | | +--rw (host-key-type)
| | | +--:(public-key)
| | | | +--rw public-key
| | | | +--rw algorithm?
| | | | | identityref
| | | | +--rw private-key?
| | | | | union
| | | | +--rw public-key?
| | | | | binary
| | | | +---x generate-private-key\
| | | | +---w input
| | | | +---w algorithm
| | | | identityref
| | | +--:(certificate)
| | | +--rw certificate
| | | {sshcom:ssh-x509-cert\
s}?
| | | +--rw algorithm?
| | | | identityref
| | | +--rw private-key?
| | | | union
| | | +--rw public-key?
| | | | binary
| | | +---x generate-private-key\
Watsen & Wu Expires May 3, 2018 [Page 25]
Internet-Draft NETCONF Client and Server Models October 2017
| | | | +---w input
| | | | +---w algorithm
| | | | identityref
| | | +--rw certificates
| | | | +--rw certificate* [nam\
e]
| | | | +--rw name strin\
g
| | | | +--rw value? binar\
y
| | | +---x generate-certificate\
-signing-request
| | | +---w input
| | | | +---w subject
| | | | | binary
| | | | +---w attributes?
| | | | binary
| | | +--ro output
| | | +--ro certificate-si\
gning-request
| | | binary
| | +--rw client-cert-auth
| | | {sshcom:ssh-x509-certs}?
| | | +--rw pinned-ca-certs?
| | | | ks:pinned-certificates
| | | +--rw pinned-client-certs?
| | | ks:pinned-certificates
| | +--rw transport-params
| | {ssh-server-transport-params-conf\
ig}?
| | +--rw host-key
| | | +--rw host-key-alg* identityref
| | +--rw key-exchange
| | | +--rw key-exchange-alg* identityr\
ef
| | +--rw encryption
| | | +--rw encryption-alg* identityref\
| | +--rw mac
| | | +--rw mac-alg* identityref
| | +--rw compression
| | +--rw compression-alg* identityre\
f
| +--:(tls) {tls-call-home}?
| +--rw tls
| +--rw address inet:host
| +--rw port? inet:port-number\
Watsen & Wu Expires May 3, 2018 [Page 26]
Internet-Draft NETCONF Client and Server Models October 2017
| +--rw server-identity
| | +--rw algorithm?
| | | identityref
| | +--rw private-key?
| | | union
| | +--rw public-key?
| | | binary
| | +---x generate-private-key
| | | +---w input
| | | +---w algorithm identityref
| | +--rw certificates
| | | +--rw certificate* [name]
| | | +--rw name string
| | | +--rw value? binary
| | +---x generate-certificate-signing-req\
uest
| | +---w input
| | | +---w subject binary
| | | +---w attributes? binary
| | +--ro output
| | +--ro certificate-signing-reques\
t
| | binary
| +--rw client-auth
| | +--rw pinned-ca-certs?
| | | ks:pinned-certificates
| | +--rw pinned-client-certs?
| | | ks:pinned-certificates
| | +--rw cert-maps
| | +--rw cert-to-name* [id]
| | +--rw id uint32
| | +--rw fingerprint
| | | x509c2n:tls-fingerprint
| | +--rw map-type identityref\
| | +--rw name string
| +--rw hello-params
| {tls-server-hello-params-config}?\
| +--rw tls-versions
| | +--rw tls-version* identityref
| +--rw cipher-suites
| +--rw cipher-suite* identityref
+--rw connection-type
| +--rw (connection-type)?
| +--:(persistent-connection)
| | +--rw persistent!
| | +--rw idle-timeout? uint32
Watsen & Wu Expires May 3, 2018 [Page 27]
Internet-Draft NETCONF Client and Server Models October 2017
| | +--rw keep-alives
| | +--rw max-wait? uint16
| | +--rw max-attempts? uint8
| +--:(periodic-connection)
| +--rw periodic!
| +--rw idle-timeout? uint16
| +--rw reconnect-timeout? uint16
+--rw reconnect-strategy
+--rw start-with? enumeration
+--rw max-attempts? uint8
4.2. Example Usage
The following example illustrates configuring a NETCONF server to
listen for NETCONF client connections using both the SSH and TLS
transport protocols, as well as configuring call-home to two NETCONF
clients, one using SSH and the other using TLS.
This example is consistent with the examples presented in Section 2.2
of [I-D.ietf-netconf-keystore].
[ note: '\' line wrapping for formatting only]
<netconf-server
xmlns="urn:ietf:params:xml:ns:yang:ietf-netconf-server"
xmlns:x509c2n="urn:ietf:params:xml:ns:yang:ietf-x509-cert-to-name">\
<!-- listening for SSH and TLS connections -->
<listen>
<endpoint> <!-- listening for SSH connections -->
<name>netconf/ssh</name>
<ssh>
<address>192.0.2.7</address>
<server-identity>
<host-key>
<name>deployment-specific-certificate</name>
<public-key>
<algorithm xmlns:ks="urn:ietf:params:xml:ns:yang:ietf-k\
eystore">ks:secp521r1</algorithm>
<private-key>base64encodedvalue==</private-key>
<public-key>base64encodedvalue==</public-key>
</public-key>
</host-key>
</server-identity>
<client-cert-auth>
<pinned-ca-certs>deployment-specific-ca-certs</pinned-ca-ce\
rts>
Watsen & Wu Expires May 3, 2018 [Page 28]
Internet-Draft NETCONF Client and Server Models October 2017
<pinned-client-certs>explicitly-trusted-client-certs</pinne\
d-client-certs>
</client-cert-auth>
</ssh>
</endpoint>
<endpoint> <!-- listening for TLS sessions -->
<name>netconf/tls</name>
<tls>
<address>192.0.2.7</address>
<server-identity>
<algorithm xmlns:ks="urn:ietf:params:xml:ns:yang:ietf-keyst\
ore">ks:secp521r1</algorithm>
<private-key>base64encodedvalue==</private-key>
<public-key>base64encodedvalue==</public-key>
<certificates>
<certificate>
<name>domain certificate</name>
<value>base64encodedvalue==</value>
</certificate>
</certificates>
</server-identity>
<client-auth>
<pinned-ca-certs>deployment-specific-ca-certs</pinned-ca-ce\
rts>
<pinned-client-certs>explicitly-trusted-client-certs</pinne\
d-client-certs>
<cert-maps>
<cert-to-name>
<id>1</id>
<fingerprint>11:0A:05:11:00</fingerprint>
<map-type>x509c2n:san-any</map-type>
</cert-to-name>
<cert-to-name>
<id>2</id>
<fingerprint>B3:4F:A1:8C:54</fingerprint>
<map-type>x509c2n:specified</map-type>
<name>scooby-doo</name>
</cert-to-name>
</cert-maps>
</client-auth>
</tls>
</endpoint>
</listen>
<!-- calling home to an SSH and TLS based NETCONF clients -->
<call-home>
<netconf-client> <!-- SSH-based client -->
<name>config-mgr</name>
Watsen & Wu Expires May 3, 2018 [Page 29]
Internet-Draft NETCONF Client and Server Models October 2017
<endpoints>
<endpoint>
<name>east-data-center</name>
<ssh>
<address>east.config-mgr.example.com</address>
<server-identity>
<host-key>
<name>deployment-specific-certificate</name>
<public-key>
<algorithm xmlns:ks="urn:ietf:params:xml:ns:yang:ie\
tf-keystore">ks:secp521r1</algorithm>
<private-key>base64encodedvalue==</private-key>
<public-key>base64encodedvalue==</public-key>
</public-key>
</host-key>
</server-identity>
<client-cert-auth>
<pinned-ca-certs>deployment-specific-ca-certs</pinned-c\
a-certs>
<pinned-client-certs>explicitly-trusted-client-certs</p\
inned-client-certs>
</client-cert-auth>
</ssh>
</endpoint>
<endpoint>
<name>west-data-center</name>
<ssh>
<address>west.config-mgr.example.com</address>
<server-identity>
<host-key>
<name>deployment-specific-certificate</name>
<public-key>
<algorithm xmlns:ks="urn:ietf:params:xml:ns:yang:ie\
tf-keystore">ks:secp521r1</algorithm>
<private-key>base64encodedvalue==</private-key>
<public-key>base64encodedvalue==</public-key>
</public-key>
</host-key>
</server-identity>
<client-cert-auth>
<pinned-ca-certs>deployment-specific-ca-certs</pinned-c\
a-certs>
<pinned-client-certs>explicitly-trusted-client-certs</p\
inned-client-certs>
</client-cert-auth>
</ssh>
</endpoint>
Watsen & Wu Expires May 3, 2018 [Page 30]
Internet-Draft NETCONF Client and Server Models October 2017
</endpoints>
<connection-type>
<periodic>
<idle-timeout>300</idle-timeout>
<reconnect-timeout>60</reconnect-timeout>
</periodic>
</connection-type>
<reconnect-strategy>
<start-with>last-connected</start-with>
<max-attempts>3</max-attempts>
</reconnect-strategy>
</netconf-client>
<netconf-client> <!-- TLS-based client -->
<name>data-collector</name>
<endpoints>
<endpoint>
<name>east-data-center</name>
<tls>
<address>east.analytics.example.com</address>
<server-identity>
<algorithm xmlns:ks="urn:ietf:params:xml:ns:yang:ietf-k\
eystore">ks:secp521r1</algorithm>
<private-key>base64encodedvalue==</private-key>
<public-key>base64encodedvalue==</public-key>
<certificates>
<certificate>
<name>domain certificate</name>
<value>base64encodedvalue==</value>
</certificate>
</certificates>
</server-identity>
<client-auth>
<pinned-ca-certs>deployment-specific-ca-certs</pinned-c\
a-certs>
<pinned-client-certs>explicitly-trusted-client-certs</p\
inned-client-certs>
<cert-maps>
<cert-to-name>
<id>1</id>
<fingerprint>11:0A:05:11:00</fingerprint>
<map-type>x509c2n:san-any</map-type>
</cert-to-name>
<cert-to-name>
<id>2</id>
<fingerprint>B3:4F:A1:8C:54</fingerprint>
<map-type>x509c2n:specified</map-type>
<name>scooby-doo</name>
</cert-to-name>
Watsen & Wu Expires May 3, 2018 [Page 31]
Internet-Draft NETCONF Client and Server Models October 2017
</cert-maps>
</client-auth>
</tls>
</endpoint>
<endpoint>
<name>west-data-center</name>
<tls>
<address>west.analytics.example.com</address>
<server-identity>
<algorithm xmlns:ks="urn:ietf:params:xml:ns:yang:ietf-k\
eystore">ks:secp521r1</algorithm>
<private-key>base64encodedvalue==</private-key>
<public-key>base64encodedvalue==</public-key>
<certificates>
<certificate>
<name>domain certificate</name>
<value>base64encodedvalue==</value>
</certificate>
</certificates>
</server-identity>
<client-auth>
<pinned-ca-certs>deployment-specific-ca-certs</pinned-c\
a-certs>
<pinned-client-certs>explicitly-trusted-client-certs</p\
inned-client-certs>
<cert-maps>
<cert-to-name>
<id>1</id>
<fingerprint>11:0A:05:11:00</fingerprint>
<map-type>x509c2n:san-any</map-type>
</cert-to-name>
<cert-to-name>
<id>2</id>
<fingerprint>B3:4F:A1:8C:54</fingerprint>
<map-type>x509c2n:specified</map-type>
<name>scooby-doo</name>
</cert-to-name>
</cert-maps>
</client-auth>
</tls>
</endpoint>
</endpoints>
<connection-type>
<persistent>
<idle-timeout>300</idle-timeout>
<keep-alives>
<max-wait>30</max-wait>
<max-attempts>3</max-attempts>
Watsen & Wu Expires May 3, 2018 [Page 32]
Internet-Draft NETCONF Client and Server Models October 2017
</keep-alives>
</persistent>
</connection-type>
<reconnect-strategy>
<start-with>first-listed</start-with>
<max-attempts>3</max-attempts>
</reconnect-strategy>
</netconf-client>
</call-home>
</netconf-server>
4.3. YANG Module
This YANG module imports YANG types from [RFC6991], and YANG
groupings from [RFC7407], [I-D.ietf-netconf-ssh-client-server] and
[I-D.ietf-netconf-ssh-client-server].
<CODE BEGINS> file "ietf-netconf-server@2017-10-30.yang"
module ietf-netconf-server {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-netconf-server";
prefix "ncs";
import ietf-inet-types {
prefix inet;
reference
"RFC 6991: Common YANG Data Types";
}
import ietf-x509-cert-to-name {
prefix x509c2n;
reference
"RFC 7407: A YANG Data Model for SNMP Configuration";
}
import ietf-ssh-server {
prefix ss;
revision-date 2017-10-30; // stable grouping definitions
reference
"RFC YYYY: YANG Groupings for SSH Clients and SSH Servers";
}
import ietf-tls-server {
prefix ts;
revision-date 2017-10-30; // stable grouping definitions
reference
"RFC ZZZZ: YANG Groupings for TLS Clients and TLS Servers";
Watsen & Wu Expires May 3, 2018 [Page 33]
Internet-Draft NETCONF Client and Server Models October 2017
}
organization
"IETF NETCONF (Network Configuration) Working Group";
contact
"WG Web: <http://tools.ietf.org/wg/netconf/>
WG List: <mailto:netconf@ietf.org>
Author: Kent Watsen
<mailto:kwatsen@juniper.net>
Author: Gary Wu
<mailto:garywu@cisco.com>
Author: Juergen Schoenwaelder
<mailto:j.schoenwaelder@jacobs-university.de>";
description
"This module contains a collection of YANG definitions for
configuring NETCONF servers.
Copyright (c) 2017 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision "2017-10-30" {
description
"Initial version";
reference
"RFC XXXX: NETCONF Client and Server Models";
}
// Features
feature listen {
description
Watsen & Wu Expires May 3, 2018 [Page 34]
Internet-Draft NETCONF Client and Server Models October 2017
"The 'listen' feature indicates that the NETCONF server
supports opening a port to accept NETCONF client connections
using at least one transport (e.g., SSH, TLS, etc.).";
}
feature ssh-listen {
description
"The 'ssh-listen' feature indicates that the NETCONF server
supports opening a port to accept NETCONF over SSH
client connections.";
reference
"RFC 6242: Using the NETCONF Protocol over Secure Shell (SSH)";
}
feature tls-listen {
description
"The 'tls-listen' feature indicates that the NETCONF server
supports opening a port to accept NETCONF over TLS
client connections.";
reference
"RFC 7589: Using the NETCONF Protocol over Transport
Layer Security (TLS) with Mutual X.509
Authentication";
}
feature call-home {
description
"The 'call-home' feature indicates that the NETCONF server
supports initiating NETCONF call home connections to NETCONF
clients using at least one transport (e.g., SSH, TLS, etc.).";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call Home";
}
feature ssh-call-home {
description
"The 'ssh-call-home' feature indicates that the NETCONF
server supports initiating a NETCONF over SSH call
home connection to NETCONF clients.";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call Home";
}
feature tls-call-home {
description
"The 'tls-call-home' feature indicates that the NETCONF
server supports initiating a NETCONF over TLS call
home connection to NETCONF clients.";
Watsen & Wu Expires May 3, 2018 [Page 35]
Internet-Draft NETCONF Client and Server Models October 2017
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call Home";
}
container netconf-server {
uses netconf-server;
description
"Top-level container for NETCONF server configuration.";
}
grouping netconf-server {
description
"Top-level grouping for NETCONF server configuration.";
container listen {
if-feature listen;
description
"Configures listen behavior";
leaf idle-timeout {
type uint16;
units "seconds";
default 3600; // one hour
description
"Specifies the maximum number of seconds that a NETCONF
session may remain idle. A NETCONF session will be dropped
if it is idle for an interval longer than this number of
seconds. If set to zero, then the server will never drop
a session because it is idle. Sessions that have a
notification subscription active are never dropped.";
}
list endpoint {
key name;
min-elements 1;
description
"List of endpoints to listen for NETCONF connections.";
leaf name {
type string;
description
"An arbitrary name for the NETCONF listen endpoint.";
}
choice transport {
mandatory true;
description
"Selects between available transports.";
case ssh {
if-feature ssh-listen;
container ssh {
description
"SSH-specific listening configuration for inbound
Watsen & Wu Expires May 3, 2018 [Page 36]
Internet-Draft NETCONF Client and Server Models October 2017
connections.";
leaf address {
type inet:ip-address;
mandatory true;
description
"The IP address to listen on for incoming
connections. The NETCONF server will listen
on all configured interfaces if no value is
specified. INADDR_ANY (0.0.0.0) or INADDR6_ANY
(0:0:0:0:0:0:0:0 a.k.a. ::) MUST be used when
the server is to listen on all IPv4 or IPv6
addresses, respectively.";
}
leaf port {
type inet:port-number;
default 830;
description
"The local port number to listen on. If no value
is specified, the IANA-assigned port value for
'netconf-ssh' (830) is used.";
}
uses ss:ssh-server-grouping;
}
}
case tls {
if-feature tls-listen;
container tls {
description
"TLS-specific listening configuration for inbound
connections.";
leaf address {
type inet:ip-address;
mandatory true;
description
"The IP address to listen on for incoming
connections. The NETCONF server will listen
on all configured interfaces if no value is
specified. INADDR_ANY (0.0.0.0) or INADDR6_ANY
(0:0:0:0:0:0:0:0 a.k.a. ::) MUST be used when
the server is to listen on all IPv4 or IPv6
addresses, respectively.";
}
leaf port {
type inet:port-number;
default 6513;
description
"The local port number to listen on. If no value
is specified, the IANA-assigned port value for
Watsen & Wu Expires May 3, 2018 [Page 37]
Internet-Draft NETCONF Client and Server Models October 2017
'netconf-tls' (6513) is used.";
}
uses ts:tls-server-grouping {
refine "client-auth" {
must 'pinned-ca-certs or pinned-client-certs';
description
"NETCONF/TLS servers MUST validate client
certiticates.";
}
augment "client-auth" {
description
"Augments in the cert-to-name structure.";
container cert-maps {
uses x509c2n:cert-to-name;
description
"The cert-maps container is used by a TLS-based
NETCONF server to map the NETCONF client's
presented X.509 certificate to a NETCONF
username. If no matching and valid cert-to-name
list entry can be found, then the NETCONF server
MUST close the connection, and MUST NOT accept
NETCONF messages over it.";
reference
"RFC WWWW: NETCONF over TLS, Section 7";
}
}
}
}
}
}
}
}
container call-home {
if-feature call-home;
description
"Configures call-home behavior";
list netconf-client {
key name;
min-elements 1;
description
"List of NETCONF clients the NETCONF server is to initiate
call-home connections to in parallel.";
leaf name {
type string;
description
"An arbitrary name for the remote NETCONF client.";
}
Watsen & Wu Expires May 3, 2018 [Page 38]
Internet-Draft NETCONF Client and Server Models October 2017
container endpoints {
description
"Container for the list of endpoints.";
list endpoint {
key name;
min-elements 1;
ordered-by user;
description
"A non-empty user-ordered list of endpoints for this
NETCONF server to try to connect to in sequence.
Defining more than one enables high-availability.";
leaf name {
type string;
description
"An arbitrary name for this endpoint.";
}
choice transport {
mandatory true;
description
"Selects between available transports.";
case ssh {
if-feature ssh-call-home;
container ssh {
description
"Specifies SSH-specific call-home transport
configuration.";
leaf address {
type inet:host;
mandatory true;
description
"The IP address or hostname of the endpoint.
If a domain name is configured, then the DNS
resolution should happen on each usage attempt.
If the the DNS resolution results in multiple
IP addresses, the IP addresses will be tried
according to local preference order until a
connection has been established or until all
IP addresses have failed.";
}
leaf port {
type inet:port-number;
default 4334;
description
"The IP port for this endpoint. The NETCONF
server will use the IANA-assigned well-known
port for 'netconf-ch-ssh' (4334) if no value
is specified.";
}
Watsen & Wu Expires May 3, 2018 [Page 39]
Internet-Draft NETCONF Client and Server Models October 2017
uses ss:ssh-server-grouping;
}
}
case tls {
if-feature tls-call-home;
container tls {
description
"Specifies TLS-specific call-home transport
configuration.";
leaf address {
type inet:host;
mandatory true;
description
"The IP address or hostname of the endpoint.
If a domain name is configured, then the DNS
resolution should happen on each usage attempt.
If the the DNS resolution results in multiple
IP addresses, the IP addresses will be tried
according to local preference order until a
connection has been established or until all
IP addresses have failed.";
}
leaf port {
type inet:port-number;
default 4335;
description
"The IP port for this endpoint. The NETCONF
server will use the IANA-assigned well-known
port for 'netconf-ch-tls' (4335) if no value
is specified.";
}
uses ts:tls-server-grouping {
refine "client-auth" {
must 'pinned-ca-certs or pinned-client-certs';
description
"NETCONF/TLS servers MUST validate client
certiticates.";
}
augment "client-auth" {
description
"Augments in the cert-to-name structure.";
container cert-maps {
uses x509c2n:cert-to-name;
description
"The cert-maps container is used by a
TLS-based NETCONF server to map the NETCONF
client's presented X.509 certificate to a
NETCONF username. If no matching and valid
Watsen & Wu Expires May 3, 2018 [Page 40]
Internet-Draft NETCONF Client and Server Models October 2017
cert-to-name list entry can be found, then
the NETCONF server MUST close the connection,
and MUST NOT accept NETCONF messages over
it.";
reference
"RFC WWWW: NETCONF over TLS, Section 7";
}
}
}
}
} // end tls
} // end choice
} // end endpoint
}
container connection-type {
description
"Indicates the kind of connection to use.";
choice connection-type {
description
"Selects between available connection types.";
case persistent-connection {
container persistent {
presence true;
description
"Maintain a persistent connection to the NETCONF
client. If the connection goes down, immediately
start trying to reconnect to it, using the
reconnection strategy.
This connection type minimizes any NETCONF client
to NETCONF server data-transfer delay, albeit at
the expense of holding resources longer.";
leaf idle-timeout {
type uint32;
units "seconds";
default 86400; // one day;
description
"Specifies the maximum number of seconds that a
a NETCONF session may remain idle. A NETCONF
session will be dropped if it is idle for an
interval longer than this number of seconds.
If set to zero, then the server will never drop
a session because it is idle. Sessions that
have a notification subscription active are
never dropped.";
}
container keep-alives {
description
Watsen & Wu Expires May 3, 2018 [Page 41]
Internet-Draft NETCONF Client and Server Models October 2017
"Configures the keep-alive policy, to proactively
test the aliveness of the SSH/TLS client. An
unresponsive SSH/TLS client will be dropped after
approximately max-attempts * max-wait seconds.";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call
Home, Section 3.1, item S6";
leaf max-wait {
type uint16 {
range "1..max";
}
units seconds;
default 30;
description
"Sets the amount of time in seconds after which
if no data has been received from the SSH/TLS
client, a SSH/TLS-level message will be sent
to test the aliveness of the SSH/TLS client.";
}
leaf max-attempts {
type uint8;
default 3;
description
"Sets the maximum number of sequential keep-alive
messages that can fail to obtain a response from
the SSH/TLS client before assuming the SSH/TLS
client is no longer alive.";
}
}
}
}
case periodic-connection {
container periodic {
presence true;
description
"Periodically connect to the NETCONF client, so that
the NETCONF client may deliver messages pending for
the NETCONF server. The NETCONF client must close
the connection when it is ready to release it. Once
the connection has been closed, the NETCONF server
will restart its timer until the next connection.";
leaf idle-timeout {
type uint16;
units "seconds";
default 300; // five minutes
description
"Specifies the maximum number of seconds that a
a NETCONF session may remain idle. A NETCONF
Watsen & Wu Expires May 3, 2018 [Page 42]
Internet-Draft NETCONF Client and Server Models October 2017
session will be dropped if it is idle for an
interval longer than this number of seconds.
If set to zero, then the server will never drop
a session because it is idle. Sessions that
have a notification subscription active are
never dropped.";
}
leaf reconnect-timeout {
type uint16 {
range "1..max";
}
units minutes;
default 60;
description
"Sets the maximum amount of unconnected time the
NETCONF server will wait before re-establishing
a connection to the NETCONF client. The NETCONF
server may initiate a connection before this
time if desired (e.g., to deliver an event
notification message).";
}
}
}
}
}
container reconnect-strategy {
description
"The reconnection strategy directs how a NETCONF server
reconnects to a NETCONF client, after discovering its
connection to the client has dropped, even if due to a
reboot. The NETCONF server starts with the specified
endpoint and tries to connect to it max-attempts times
before trying the next endpoint in the list (round
robin).";
leaf start-with {
type enumeration {
enum first-listed {
description
"Indicates that reconnections should start with
the first endpoint listed.";
}
enum last-connected {
description
"Indicates that reconnections should start with
the endpoint last connected to. If no previous
connection has ever been established, then the
first endpoint configured is used. NETCONF
servers SHOULD be able to remember the last
Watsen & Wu Expires May 3, 2018 [Page 43]
Internet-Draft NETCONF Client and Server Models October 2017
endpoint connected to across reboots.";
}
}
default first-listed;
description
"Specifies which of the NETCONF client's endpoints the
NETCONF server should start with when trying to connect
to the NETCONF client.";
}
leaf max-attempts {
type uint8 {
range "1..max";
}
default 3;
description
"Specifies the number times the NETCONF server tries to
connect to a specific endpoint before moving on to the
next endpoint in the list (round robin).";
}
}
}
}
}
}
<CODE ENDS>
5. Design Considerations
Editorial: this section is a hold over from before, previously called
"Objectives". It was only written two support the "server" (not the
"client"). The question is if it's better to add the missing
"client" parts, or remove this section altogether.
The primary purpose of the YANG modules defined herein is to enable
the configuration of the NETCONF client and servers. This scope
includes the following objectives:
5.1. Support all NETCONF transports
The YANG module should support all current NETCONF transports, namely
NETCONF over SSH [RFC6242], NETCONF over TLS [RFC7589], and to be
extensible to support future transports as necessary.
Because implementations may not support all transports, the modules
should use YANG "feature" statements so that implementations can
accurately advertise which transports are supported.
Watsen & Wu Expires May 3, 2018 [Page 44]
Internet-Draft NETCONF Client and Server Models October 2017
5.2. Enable each transport to select which keys to use
Servers may have a multiplicity of host-keys or server-certificates
from which subsets may be selected for specific uses. For instance,
a NETCONF server may want to use one set of SSH host-keys when
listening on port 830, and a different set of SSH host-keys when
calling home. The data models provided herein should enable
configuration of which keys to use on a per-use basis.
5.3. Support authenticating NETCONF clients certificates
When a certificate is used to authenticate a NETCONF client, there is
a need to configure the server to know how to authenticate the
certificates. The server should be able to authenticate the client's
certificate either by using path-validation to a configured trust
anchor or by matching the client-certificate to one previously
configured.
5.4. Support mapping authenticated NETCONF client certificates to
usernames
When a client certificate is used for TLS client authentication, the
NETCONF server must be able to derive a username from the
authenticated certificate. Thus the modules defined herein should
enable this mapping to be configured.
5.5. Support both listening for connections and call home
The NETCONF protocols were originally defined as having the server
opening a port to listen for client connections. More recently the
NETCONF working group defined support for call-home ([RFC8071]),
enabling the server to initiate the connection to the client. Thus
the modules defined herein should enable configuration for both
listening for connections and calling home. Because implementations
may not support both listening for connections and calling home, YANG
"feature" statements should be used so that implementation can
accurately advertise the connection types it supports.
5.6. For Call Home connections
The following objectives only pertain to call home connections.
5.6.1. Support more than one NETCONF client
A NETCONF server may be managed by more than one NETCONF client. For
instance, a deployment may have one client for provisioning and
another for fault monitoring. Therefore, when it is desired for a
Watsen & Wu Expires May 3, 2018 [Page 45]
Internet-Draft NETCONF Client and Server Models October 2017
server to initiate call home connections, it should be able to do so
to more than one client.
5.6.2. Support NETCONF clients having more than one endpoint
A NETCONF client managing a NETCONF server may implement a high-
availability strategy employing a multiplicity of active and/or
passive endpoint. Therefore, when it is desired for a server to
initiate call home connections, it should be able to connect to any
of the client's endpoints.
5.6.3. Support a reconnection strategy
Assuming a NETCONF client has more than one endpoint, then it becomes
necessary to configure how a NETCONF server should reconnect to the
client should it lose its connection to one the client's endpoints.
For instance, the NETCONF server may start with first endpoint
defined in a user-ordered list of endpoints or with the last
endpoints it was connected to.
5.6.4. Support both persistent and periodic connections
NETCONF clients may vary greatly on how frequently they need to
interact with a NETCONF server, how responsive interactions need to
be, and how many simultaneous connections they can support. Some
clients may need a persistent connection to servers to optimize real-
time interactions, while others prefer periodic interactions in order
to minimize resource requirements. Therefore, when it is necessary
for server to initiate connections, it should be configurable if the
connection is persistent or periodic.
5.6.5. Reconnection strategy for periodic connections
The reconnection strategy should apply to both persistent and
periodic connections. How it applies to periodic connections becomes
clear when considering that a periodic "connection" is a logical
connection to a single server. That is, the periods of
unconnectedness are intentional as opposed to due to external
reasons. A periodic "connection" should always reconnect to the same
server until it is no longer able to, at which time the reconnection
strategy guides how to connect to another server.
5.6.6. Keep-alives for persistent connections
If a persistent connection is desired, it is the responsibility of
the connection initiator to actively test the "aliveness" of the
connection. The connection initiator must immediately work to
reestablish a persistent connection as soon as the connection is
Watsen & Wu Expires May 3, 2018 [Page 46]
Internet-Draft NETCONF Client and Server Models October 2017
lost. How often the connection should be tested is driven by NETCONF
client requirements, and therefore keep-alive settings should be
configurable on a per-client basis.
5.6.7. Customizations for periodic connections
If a periodic connection is desired, it is necessary for the NETCONF
server to know how often it should connect. This frequency
determines the maximum amount of time a NETCONF client may have to
wait to send data to a server. A server may connect to a client
before this interval expires if desired (e.g., to send data to a
client).
6. Security Considerations
The YANG module defined in this document uses groupings defined in
[I-D.ietf-netconf-ssh-client-server] and
[I-D.ietf-netconf-tls-client-server]. Please see the Security
Considerations section in those documents for concerns related those
groupings.
The YANG module defined in this document is designed to be accessed
via YANG based management protocols, such as NETCONF [RFC6241] and
RESTCONF [RFC8040]. Both of these protocols have mandatory-to-
implement secure transport layers (e.g., SSH, TLS) with mutual
authentication.
The NETCONF access control model (NACM) [RFC6536] provides the means
to restrict access for particular users to a pre-configured subset of
all available protocol operations and content.
There are a number of data nodes defined in this YANG module that are
writable/creatable/deletable (i.e., config true, which is the
default). These data nodes may be considered sensitive or vulnerable
in some network environments. Write operations (e.g., edit-config)
to these data nodes without proper protection can have a negative
effect on network operations. These are the subtrees and data nodes
and their sensitivity/vulnerability:
/: The entire data trees defined by the modules defined in this
draft are sensitive to write operations. For instance, the
addition or removal of references to keys, certificates,
trusted anchors, etc., can dramatically alter the implemented
security policy. However, no NACM annotations are applied as
the data SHOULD be editable by users other than a designated
'recovery session'.
Watsen & Wu Expires May 3, 2018 [Page 47]
Internet-Draft NETCONF Client and Server Models October 2017
Some of the readable data nodes in this YANG module may be considered
sensitive or vulnerable in some network environments. It is thus
important to control read access (e.g., via get, get-config, or
notification) to these data nodes. These are the subtrees and data
nodes and their sensitivity/vulnerability:
NONE
Some of the RPC operations in this YANG module may be considered
sensitive or vulnerable in some network environments. It is thus
important to control access to these operations. These are the
operations and their sensitivity/vulnerability:
NONE
7. IANA Considerations
7.1. The IETF XML Registry
This document registers two URIs in the IETF XML registry [RFC3688].
Following the format in [RFC3688], the following registrations are
requested:
URI: urn:ietf:params:xml:ns:yang:ietf-netconf-client
Registrant Contact: The NETCONF WG of the IETF.
XML: N/A, the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:ietf-netconf-server
Registrant Contact: The NETCONF WG of the IETF.
XML: N/A, the requested URI is an XML namespace.
7.2. The YANG Module Names Registry
This document registers two YANG modules in the YANG Module Names
registry [RFC7950]. Following the format in [RFC7950], the the
following registrations are requested:
name: ietf-netconf-client
namespace: urn:ietf:params:xml:ns:yang:ietf-netconf-client
prefix: ncc
reference: RFC XXXX
name: ietf-netconf-server
namespace: urn:ietf:params:xml:ns:yang:ietf-netconf-server
prefix: ncs
reference: RFC XXXX
Watsen & Wu Expires May 3, 2018 [Page 48]
Internet-Draft NETCONF Client and Server Models October 2017
8. Acknowledgements
The authors would like to thank for following for lively discussions
on list and in the halls (ordered by last name): Andy Bierman, Martin
Bjorklund, Benoit Claise, Mehmet Ersue, Balazs Kovacs, David
Lamparter, Alan Luchuk, Ladislav Lhotka, Radek Krejci, Tom Petch,
Juergen Schoenwaelder, Phil Shafer, Sean Turner, and Bert Wijnen.
9. References
9.1. Normative References
[I-D.ietf-netconf-keystore]
Watsen, K., "Keystore Model", draft-ietf-netconf-
keystore-02 (work in progress), June 2017.
[I-D.ietf-netconf-ssh-client-server]
Watsen, K. and G. Wu, "SSH Client and Server Models",
draft-ietf-netconf-ssh-client-server-03 (work in
progress), June 2017.
[I-D.ietf-netconf-tls-client-server]
Watsen, K. and G. Wu, "YANG Groupings for TLS Clients and
TLS Servers", draft-ietf-netconf-tls-client-server-04
(work in progress), October 2017.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
and A. Bierman, Ed., "Network Configuration Protocol
(NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
<https://www.rfc-editor.org/info/rfc6241>.
[RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure
Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011,
<https://www.rfc-editor.org/info/rfc6242>.
[RFC6991] Schoenwaelder, J., Ed., "Common YANG Data Types",
RFC 6991, DOI 10.17487/RFC6991, July 2013,
<https://www.rfc-editor.org/info/rfc6991>.
[RFC7407] Bjorklund, M. and J. Schoenwaelder, "A YANG Data Model for
SNMP Configuration", RFC 7407, DOI 10.17487/RFC7407,
December 2014, <https://www.rfc-editor.org/info/rfc7407>.
Watsen & Wu Expires May 3, 2018 [Page 49]
Internet-Draft NETCONF Client and Server Models October 2017
[RFC7589] Badra, M., Luchuk, A., and J. Schoenwaelder, "Using the
NETCONF Protocol over Transport Layer Security (TLS) with
Mutual X.509 Authentication", RFC 7589,
DOI 10.17487/RFC7589, June 2015,
<https://www.rfc-editor.org/info/rfc7589>.
[RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
RFC 7950, DOI 10.17487/RFC7950, August 2016,
<https://www.rfc-editor.org/info/rfc7950>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
9.2. Informative References
[I-D.ietf-netmod-yang-tree-diagrams]
Bjorklund, M. and L. Berger, "YANG Tree Diagrams", draft-
ietf-netmod-yang-tree-diagrams-02 (work in progress),
October 2017.
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
DOI 10.17487/RFC3688, January 2004,
<https://www.rfc-editor.org/info/rfc3688>.
[RFC6536] Bierman, A. and M. Bjorklund, "Network Configuration
Protocol (NETCONF) Access Control Model", RFC 6536,
DOI 10.17487/RFC6536, March 2012,
<https://www.rfc-editor.org/info/rfc6536>.
[RFC8040] Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
<https://www.rfc-editor.org/info/rfc8040>.
[RFC8071] Watsen, K., "NETCONF Call Home and RESTCONF Call Home",
RFC 8071, DOI 10.17487/RFC8071, February 2017,
<https://www.rfc-editor.org/info/rfc8071>.
Watsen & Wu Expires May 3, 2018 [Page 50]
Internet-Draft NETCONF Client and Server Models October 2017
Appendix A. Change Log
A.1. 00 to 01
o Renamed "keychain" to "keystore".
A.2. 01 to 02
o Added to ietf-netconf-client ability to connected to a cluster of
endpoints, including a reconnection-strategy.
o Added to ietf-netconf-client the ability to configure connection-
type and also keep-alive strategy.
o Updated both modules to accomodate new groupings in the ssh/tls
drafts.
A.3. 02 to 03
o Refined use of tls-client-grouping to add a must statement
indicating that the TLS client must specify a client-certificate.
o Changed 'netconf-client' to be a grouping (not a container).
A.4. 03 to 04
o Added RFC 8174 to Requirements Language Section.
o Replaced refine statement in ietf-netconf-client to add a
mandatory true.
o Added refine statement in ietf-netconf-server to add a must
statement.
o Now there are containers and groupings, for both the client and
server models.
o Now tree diagrams reference ietf-netmod-yang-tree-diagrams
o Updated examples to inline key and certificates (no longer a
leafref to keystore)
Authors' Addresses
Kent Watsen
Juniper Networks
EMail: kwatsen@juniper.net
Watsen & Wu Expires May 3, 2018 [Page 51]
Internet-Draft NETCONF Client and Server Models October 2017
Gary Wu
Cisco Networks
EMail: garywu@cisco.com
Watsen & Wu Expires May 3, 2018 [Page 52]