In-Place Bandwidth Update for MPLS RSVP-TE LSPs
draft-alibee-teas-rsvp-inplace-lsp-bw-update-01

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Active".
Expired & archived
Authors Zafar Ali , Vishnu Pavan Beeram , Peter Schoenmaker
Last updated 2025-09-18 (Latest revision 2025-03-17)
RFC stream (None)
Formats
txt html xml htmlized bibtex bibxml
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)
Email authors IPR References Referenced by Nits Search email archive

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

txt html xml htmlized bibtex bibxml

Abstract

This document describes the procedure for updating the bandwidth of an MPLS RSVP-TE Label Switched Path (LSP) tunnel in-place without employing make-before-break (MBB).

Authors

Zafar Ali
Vishnu Pavan Beeram
Peter Schoenmaker

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)