Shepherd writeup

Document:  draft-ietf-eman-energy-monitoring-mib-10
Title:     Power and Energy Monitoring MIB 
Editors:   M. Chandramouli, B. Claise, B. Schoening,
           J. Quittek and T. Dietz
Intended status:  Proposed Standard

 (1) What type of RFC is being requested (BCP, Proposed Standard,
     Internet Standard, Informational, Experimental, or Historic)?
     Why is this the proper type of RFC?  Is this type of RFC
     indicated in the title page header?

Proposed Standard.  Now that the EMAN Framework is in the RFC Editor
Queue, EMAN's three MIB drafts are ready for submission to the IESG.
Being MIBs, interoperability requires that they be Standards Track
RFCs.  Yes, their headers say Standards Track.

 (2) The IESG approval announcement includes a Document Announcement
     Write-Up. Please provide such a Document Announcement Write-Up.
     Recent examples can be found in the "Action" announcements for
     approved documents. The approval announcement contains the
     following sections:

Technical Summary:

The Energy Monitoring MIB has two independent MIB modules,
energyObjectMIB and powerAttributesMIB. The first, energyObjectMIB, 
is focused on measurement of power and energy. The second,
powerAttributesMIB, is focused on power quality measurements for
Energy Objects.
This document defines a subset of the Management Information Base
(MIB) for power and energy monitoring of devices.  Devices and their
sub-components can be modeled using the containment tree of the

Working Group Summary

Version -01 of the draft was published in February 2012.
New versions were published about every three months from then
until version -08 in early December 2013.

Document Quality

Version -08 had its WG Last Call from 13 to 30 December 2013;
as part of that it was reviewed by the MIB-Doctors.  Six reviews
were received from the EMAN list, as well as a detailed list of
changes and improvements from the MIB Doctors.
The authors have modified the draft in response to that feedback; 
we believe that the current (-09) version has resolved all the 
issues.  That discussion raged on the EMAN list through January


Document Shepherd:         Nevil Brownlee
Responsible Area Director: Joel Jaegli

 (3) Briefly describe the review of this document that was performed
     by the Document Shepherd.  If this version of the document is not
     ready for publication, please explain why the document is being
     forwarded to the IESG.

I have read the draft carefully.  As well as the ASN1 MIB definitions,
it has lots of supporting detail, including a brief summary of the EMAN
Framework, the architecture of the MIBs (with UML diagrams for them),
and clear descriptions of all the concepts on which Energy Monitoring
depends.  It also has discussions of how these MIBS fit together
with other IETF MIBs, a realistic Security Considerations section
and a brief overview of two known implementations of the MIBs.

 (4) Does the document Shepherd have any concerns about the depth or
     breadth of the reviews that have been performed?

No.  The only reason that this draft has waited since February 2014
is that it depends on the EMAN Framework - which is now in the RFC
Editor Queue.

 (5) Do portions of the document need review from a particular or from
     broader perspective, e.g., security, operational complexity, AAA,
     DNS, DHCP, XML, or internationalization? If so, describe the
     review that took place.

This draft was carefully reviewed by the MIB Doctors.  Several problems
with it were pointed out; they have been fixed in the current version.

 (6) Describe any specific concerns or issues that the Document
     Shepherd has with this document that the Responsible Area
     Director and/or the IESG should be aware of? For example, perhaps
     he or she is uncomfortable with certain parts of the document, or
     has concerns whether there really is a need for it. In any event,
     if the WG has discussed those issues and has indicated that it
     still wishes to advance the document, detail those concerns here.

No known problems.

 (7) Has each author confirmed that any and all appropriate IPR
    disclosures required for full conformance with the provisions of
    BCP 78 and BCP 79 have already been filed. If not, explain why.


 (8) Has an IPR disclosure been filed that references this document?
     If so, summarize any WG discussion and conclusion regarding the
     IPR disclosures.

Yes, IPR disclosure # 2147 covers this draft.  The WG was aware
of that from very early on, there;s been no discussion of IPR within
the WG.

 (9) How solid is the WG consensus behind this document? Does it
     represent the strong concurrence of a few individuals, with
     others being silent, or does the WG as a whole understand and
     agree with it?

There is strong consensus for this draft within the EMAN WG.

(10) Has anyone threatened an appeal or otherwise indicated extreme
     discontent? If so, please summarise the areas of conflict in
     separate email messages to the Responsible Area Director. (It
     should be in a separate email because this questionnaire is
     publicly available.)


(11) Identify any ID nits the Document Shepherd has found in this
     document. (See and the
     Internet-Drafts Checklist). Boilerplate checks are not enough;
     this check needs to be thorough.

No nits.

(12) Describe how the document meets any required formal review
     criteria, such as the MIB Doctor, media type, and URI type

It was reviewed by the MIB Doctors during its WG Last Call.

(13) Have all references within this document been identified as
     either normative or informative?

Yes.  There is normative references to IEEE 802.1AB's LLDP MIB
and to ANSI's LLDP MIB extension module, both of which were 
published in 2005.

(14) Are there normative references to documents that are not ready
     for advancement or are otherwise in an unclear state? If such
     normative references exist, what is the plan for their

Yes.  This draft has a normative reference to the EMAN Energy Aware
MIB draft (and vice versa).  These two drafts are being submitted

(15) Are there downward normative references references (see RFC
     3967)?  If so, list these downward references to support the Area
     Director in the Last Call procedure.

No.  There is a reference to ANSI's LLDP MIB extension module,
but that was published in 2005.

(16) Will publication of this document change the status of any
     existing RFCs? Are those RFCs listed on the title page header,
     listed in the abstract, and discussed in the introduction? If the
     RFCs are not listed in the Abstract and Introduction, explain
     why, and point to the part of the document where the relationship
     of this document to the other RFCs is discussed. If this
     information is not in the document, explain why the WG considers
     it unnecessary.


(17) Describe the Document Shepherd's review of the IANA
     considerations section, especially with regard to its consistency
     with the body of the document. Confirm that all protocol
     extensions that the document makes are associated with the
     appropriate reservations in IANA registries.  Confirm that any
     referenced IANA registries have been clearly identified. Confirm
     that newly created IANA registries include a detailed
     specification of the initial contents for the registry, that
     allocations procedures for future registrations are defined, and
     a reasonable name for the new registry has been suggested (see
     RFC 5226).

IANA is asked to assign two indeces in mib-2 for these MIBs.
[There are two other EMAN MIB drafts being submitted concurrently with 
this one, it would be good if all the EMAN MIBs had consecutive

(18) List any new IANA registries that require Expert Review for
     future allocations. Provide any public guidance that the IESG
     would find useful in selecting the IANA Experts for these new

No new registries.

(19) Describe reviews and automated checks performed by the Document
     Shepherd to validate sections of the document written in a formal
     language, such as XML code, BNF rules, MIB definitions, etc.

I don't have any SMI checking software; I assume that the MIB Doctors
have performed such checks.