MoQT Test
draft-afrind-moq-test-00
This document is an Internet-Draft (I-D).
Anyone may submit an I-D to the IETF.
This I-D is not endorsed by the IETF and has no formal standing in the
IETF standards process.
The information below is for an old version of the document.
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
|
|
|---|---|---|---|
| Author | Alan Frindell | ||
| Last updated | 2025-03-03 | ||
| RFC stream | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | I-D Exists | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
draft-afrind-moq-test-00
Media Over QUIC A. Frindell
Internet-Draft Meta
Intended status: Informational 3 March 2025
Expires: 4 September 2025
MoQT Test
draft-afrind-moq-test-00
Abstract
This document specifies the moq-test protocol, a testing protocol for
Media over QUIC (MOQ) implementations. moq-test utilizes the Track
Namespace as parameters to the publisher, enabling flexible and
customizable testing scenarios.
About This Document
This note is to be removed before publishing as an RFC.
The latest revision of this draft can be found at
https://afrind.github.io/moq-test/draft-afrind-moq-test.html. Status
information for this document may be found at
https://datatracker.ietf.org/doc/draft-afrind-moq-test/.
Discussion of this document takes place on the Media Over QUIC
mailing list (mailto:moq@ietf.org), which is archived at
https://mailarchive.ietf.org/arch/browse/moq/. Subscribe at
https://www.ietf.org/mailman/listinfo/moq/.
Source for this draft and an issue tracker can be found at
https://github.com/afrind/moq-test.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
Frindell Expires 4 September 2025 [Page 1]
Internet-Draft moq-test March 2025
This Internet-Draft will expire on 4 September 2025.
Copyright Notice
Copyright (c) 2025 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/
license-info) in effect on the date of publication of this document.
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document. Code Components
extracted from this document must include Revised BSD License text as
described in Section 4.e of the Trust Legal Provisions and are
provided without warranty as described in the Revised BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Track Namespace Parameters . . . . . . . . . . . . . . . . . 3
2.1. Tuple Field 0: "moq-test-00" . . . . . . . . . . . . . . 3
2.2. Tuple Field 1: Forwarding Preference . . . . . . . . . . 3
2.3. Tuple Field 2: Start Group . . . . . . . . . . . . . . . 3
2.4. Tuple Field 3: Start Object . . . . . . . . . . . . . . . 4
2.5. Tuple Field 4: Last Group in Track . . . . . . . . . . . 4
2.6. Tuple Field 5: Last Object in Track . . . . . . . . . . . 4
2.7. Tuple Field 6: Objects per Group . . . . . . . . . . . . 4
2.8. Tuple Field 7: Size of Object 0 . . . . . . . . . . . . . 4
2.9. Tuple Field 8: Size of Objects > 0 . . . . . . . . . . . 4
2.10. Tuple Field 9: Object Frequency . . . . . . . . . . . . . 4
2.11. Tuple Field 10: Group Increment . . . . . . . . . . . . . 4
2.12. Tuple Field 11: Object Increment . . . . . . . . . . . . 5
2.13. Tuple Field 12: Send End of Group Markers . . . . . . . . 5
2.14. Tuple Field 13: Test Integer Extension . . . . . . . . . 5
2.15. Tuple Field 14: Test Variable Extensions . . . . . . . . 5
2.16. Tuple Field 15: Publisher Delivery Timeout . . . . . . . 5
3. Publisher Behavior . . . . . . . . . . . . . . . . . . . . . 5
4. Conventions and Definitions . . . . . . . . . . . . . . . . . 6
5. Security Considerations . . . . . . . . . . . . . . . . . . . 6
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 6
7. Normative References . . . . . . . . . . . . . . . . . . . . 6
Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . 6
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 6
Frindell Expires 4 September 2025 [Page 2]
Internet-Draft moq-test March 2025
1. Introduction
moq-test is designed to provide a comprehensive testing framework for
MOQ implementations. By leveraging the Track Namespace, moq-test
allows testers to specify various parameters that control the testing
process, such as forwarding preferences, group and object ranges, and
object sizes.
2. Track Namespace Parameters
The moq-test protocol utilizes the Track Namespace to convey testing
parameters from the publisher to the subscriber. The Track Namespace
tuple fields are defined as follows. Exactly 16 tuple fields must be
provided, but any blank tuple field other than field 0 indicates the
default value is used. Future versions will use a different value
for tuple field 0 and potentially define a different set of
parameters.
2.1. Tuple Field 0: "moq-test-00"
This field indicates that the Track Namespace parameters are for the
moq-test protocol.
2.2. Tuple Field 1: Forwarding Preference
This field specifies the forwarding preference for the track. The
following values are defined:
* 0 := One subgroup per group
* 1 := One subgroup per object
* 2 := Two subgroups per group (0 and 1)
* 3 := Datagram
The default value is 0. When using two subgroups per group, even
numbered objects are sent on subgroup 0 and odd numbered objects are
sent on group 1.
2.3. Tuple Field 2: Start Group
This field specifies the starting group number for the track. The
default value is 0.
Frindell Expires 4 September 2025 [Page 3]
Internet-Draft moq-test March 2025
2.4. Tuple Field 3: Start Object
This field specifies the starting object number for the track. The
default value is 0.
2.5. Tuple Field 4: Last Group in Track
This field specifies the last group number in the track. The default
value is 2^62 - 1 (eg: the track continues until unsubscribed).
Use caution when setting this field accessing this track via FETCH.
2.6. Tuple Field 5: Last Object in Track
This field specifies the last object number in the track. The
maximum value is the number of objects in the group, plus one if end
of group markers are used.
The default value is the maximum value.
2.7. Tuple Field 6: Objects per Group
This field specifies the number of objects per group. The default is
10.
2.8. Tuple Field 7: Size of Object 0
This field specifies the size of the first object in bytes. The
default is 1024 bytes.
2.9. Tuple Field 8: Size of Objects > 0
This specifies the size of objects with ID greater than 0, in bytes.
The default value is 100 bytes.
2.10. Tuple Field 9: Object Frequency
This field specifies the frequency at which objects are sent in
milliseconds. The default value is 1000.
2.11. Tuple Field 10: Group Increment
This field specifies the increment between group numbers. The
default is 1.
Frindell Expires 4 September 2025 [Page 4]
Internet-Draft moq-test March 2025
2.12. Tuple Field 11: Object Increment
This tuple field specifies the increment between object numbers. The
default is 1.
2.13. Tuple Field 12: Send End of Group Markers
This field specifies whether to send end of group markers.
* 0 := Do not send End of Group markers
* 1 := Send End of Group markers
End of group markers are an Object with status 0x3 End of Group.
The default value is 0 / No End of Group markers.
2.14. Tuple Field 13: Test Integer Extension
This field specifies whether to include a test integer extension on
every object in the track. The ID of the extension is 2 * field
value. The value of the extension is random.
The default value indicates no integer extension is sent.
2.15. Tuple Field 14: Test Variable Extensions
This field specifies whether to include a test variable extension on
every object in the track. The ID of the extension is 2 * field
value + 1. The value of the extension is random data.
The default value indicates no variable extension is sent.
2.16. Tuple Field 15: Publisher Delivery Timeout
This field specifies the publisher delivery timeout in milliseconds.
The default is no delivery timeout.
3. Publisher Behavior
If any namespace tuple field other than zero is not a positive
integer, or is outside the supported range of the publisher, a
SUBSCRIBE_ERROR or FETCH_ERROR is returned.
Upon receiving a vald SUBSCRIBE or FETCH for a moq-test track, the
publisher MUST publish objects according to the parameters of the
namespace.
Frindell Expires 4 September 2025 [Page 5]
Internet-Draft moq-test March 2025
The payload of each published object is the charater t (for test)
repeated for the length of the payload.
When Datagram forwarding preference is used, certain combinations of
options result in objects that cannot be transmitted below the
maximum datagram size. The publisher either responds with
SUBSCRIBE_ERROR if detected when handling the SUBSCRIBE, or
SUBSCRIBE_DONE with an error code if detected when publishing the
object.
4. Conventions and Definitions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
5. Security Considerations
The subscriber can generate an asymmetric amount of work on the
server. Servers SHOULD set limits on certain values such as object
frequency and object size to prevent resource exhaustion attacks.
6. IANA Considerations
This document has no IANA actions.
7. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/rfc/rfc2119>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/rfc/rfc8174>.
Acknowledgments
Members of the Media over QUIC working group
Author's Address
Alan Frindell
Meta
Email: afrind@meta.com
Frindell Expires 4 September 2025 [Page 6]