Segment Routing with MPLS Data Plane Encapsulation for In-situ OAM Data
draft-gandhi-spring-ioam-sr-mpls-02

Document Type Replaced Internet-Draft (individual)
Last updated 2019-08-22
Replaced by draft-gandhi-mpls-ioam-sr
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-gandhi-mpls-ioam-sr
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-gandhi-spring-ioam-sr-mpls-02.txt

Abstract

In-situ Operations, Administration, and Maintenance (IOAM) records operational and telemetry information in the data packet while the packet traverses a path between two nodes in the network. Segment Routing (SR) technology leverages the source routing paradigm. This document defines how IOAM data fields are transported with the Segment Routing with MPLS data plane (SR-MPLS) encapsulation. The procedures defined are also equally applicable to all other MPLS data plane encapsulations.

Authors

Rakesh Gandhi (rgandhi@cisco.com)
Zafar Ali (zali@cisco.com)
Clarence Filsfils (cf@cisco.com)
Frank Brockners (fbrockne@cisco.com)
Bin Wen (bin_wen@cable.comcast.com)
Voitek Kozak (voitek_kozak@comcast.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)