Technical Summary
A set of prior RFCs specify procedures for supporting multicast in
BGP/MPLS IP VPNs. These procedures allow customer multicast data to
travel across a service provider's backbone network through a set of
multicast tunnels. The tunnels are advertised in certain BGP
multicast "auto-discovery" routes, by means of a BGP attribute known
as the "Provider Multicast Service Interface (PMSI) Tunnel
attribute". Encodings have been defined that allow the PMSI Tunnel
attribute to identify bidirectional (multipoint-to-multipoint)
multicast distribution trees. However, the prior RFCs do not provide
all the necessary procedures for using bidirectional tunnels to
support multicast VPNs. This document updates RFCs 6513, 6514 and
6625 by specifying those procedures. In particular, it specifies the
procedures for assigning customer multicast flows (unidirectional or
bidirectional) to specific bidirectional tunnels in the provider
backbone, for advertising such assignments, and for determining which
flows have been assigned to which tunnels.
Working Group Summary
The consensus for adoption back in 2011 was rough, with a few
contributors disagreeing on the scope that bidir P-tunnels should apply to.
This debate has settled down a long time ago and the document has
evolved since; no disagreement was expressed in the last years, nor
during the last calls.
Document Quality
The document is believe to be of good quality by the shepherd. It can be
noted that it was written by a co-autor of the base mVPN specs based on
an understanding of underspecified areas, which are now addressed.
It has been indicated that Cisco has implemented the two main methods
described by these specs, the Flat Partitioned Method (with MP2MP LSPs)
and the Unpartitioned method (with MP2MP LSPs and also with BIDIR-PIM).
The document had two thorough reviews (by a WG contributor and by the
shepherd), leading to substantive changes in the document.
Personnel
Thomas Morin is the Document Shepherd.
Alvaro Retana is the Responsible Area Director.