Routing Information Base Info Model
draft-ietf-i2rs-rib-info-model-08

The information below is for an old version of the document
Document Type Expired Internet-Draft (i2rs WG)
Last updated 2016-04-21 (latest revision 2015-10-19)
Replaces draft-nitinb-i2rs-rib-info-model
Stream IETF
Intended RFC status Proposed Standard
Formats
Expired & archived
plain text pdf html bibtex
Stream WG state WG Consensus: Waiting for Write-Up (wg milestone: Aug 2016 - Request publication ... )
Document shepherd No shepherd assigned
IESG IESG state Expired
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-ietf-i2rs-rib-info-model-08.txt

Abstract

Routing and routing functions in enterprise and carrier networks are typically performed by network devices (routers and switches) using a routing information base (RIB). Protocols and configuration push data into the RIB and the RIB manager installs state into the hardware; for packet forwarding. This draft specifies an information model for the RIB to enable defining a standardized data model. Such a data model can be used to define an interface to the RIB from an entity that may even be external to the network device. This interface can be used to support new use-cases being defined by the IETF I2RS WG.

Authors

Nitin Bahadur (nitin_bahadur@yahoo.com)
Sriganesh Kini (sriganesh.kini@ericsson.com)
Jan Medved (jmedved@cisco.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)