Skip to main content

JSON Encoding of Data Modeled with YANG
draft-ietf-netmod-yang-json-02

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 7951.
Author Ladislav Lhotka
Last updated 2014-11-27
RFC stream Internet Engineering Task Force (IETF)
Formats
Reviews
Additional resources Mailing list discussion
Stream WG state WG Document
Document shepherd Thomas Nadeau
IESG IESG state Became RFC 7951 (Proposed Standard)
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to "Thomas Nadeau" <tnadeau@lucidvision.com>
draft-ietf-netmod-yang-json-02
NETMOD Working Group                                           L. Lhotka
Internet-Draft                                                    CZ.NIC
Intended status: Standards Track                       November 27, 2014
Expires: May 31, 2015

                JSON Encoding of Data Modeled with YANG
                     draft-ietf-netmod-yang-json-02

Abstract

   This document defines encoding rules for representing configuration,
   state data, RPC input and output parameters, and notifications
   defined using YANG as JavaScript Object Notation (JSON) text.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on May 31, 2015.

Copyright Notice

   Copyright (c) 2014 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Lhotka                    Expires May 31, 2015                  [Page 1]
Internet-Draft         JSON Encoding of YANG Data          November 2014

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Terminology and Notation  . . . . . . . . . . . . . . . . . .   3
   3.  Validation of JSON-encoded
       Instance Data . . . . . . . . . . . . . . . . . . . . . . . .   3
   4.  Names and Namespaces  . . . . . . . . . . . . . . . . . . . .   4
   5.  Encoding of YANG Data Node Instances  . . . . . . . . . . . .   6
     5.1.  The "leaf" Data Node  . . . . . . . . . . . . . . . . . .   6
     5.2.  The "container" Data Node . . . . . . . . . . . . . . . .   7
     5.3.  The "leaf-list" Data Node . . . . . . . . . . . . . . . .   7
     5.4.  The "list" Data Node  . . . . . . . . . . . . . . . . . .   7
     5.5.  The "anyxml" Data Node  . . . . . . . . . . . . . . . . .   8
   6.  The Mapping of YANG Data Types to JSON Values . . . . . . . .   9
     6.1.  Numeric Types . . . . . . . . . . . . . . . . . . . . . .   9
     6.2.  The "string" Type . . . . . . . . . . . . . . . . . . . .   9
     6.3.  The "boolean" Type  . . . . . . . . . . . . . . . . . . .   9
     6.4.  The "enumeration" Type  . . . . . . . . . . . . . . . . .   9
     6.5.  The "bits" Type . . . . . . . . . . . . . . . . . . . . .   9
     6.6.  The "binary" Type . . . . . . . . . . . . . . . . . . . .  10
     6.7.  The "leafref" Type  . . . . . . . . . . . . . . . . . . .  10
     6.8.  The "identityref" Type  . . . . . . . . . . . . . . . . .  10
     6.9.  The "empty" Type  . . . . . . . . . . . . . . . . . . . .  11
     6.10. The "union" Type  . . . . . . . . . . . . . . . . . . . .  11
     6.11. The "instance-identifier" Type  . . . . . . . . . . . . .  12
   7.  I-JSON Compliance . . . . . . . . . . . . . . . . . . . . . .  12
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .  13
   9.  Acknowledgments . . . . . . . . . . . . . . . . . . . . . . .  13
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . .  14
     10.1.  Normative References . . . . . . . . . . . . . . . . . .  14
     10.2.  Informative References . . . . . . . . . . . . . . . . .  14
   Appendix A.  A Complete Example . . . . . . . . . . . . . . . . .  15
   Appendix B.  Change Log . . . . . . . . . . . . . . . . . . . . .  17
     B.1.  Changes Between Revisions -01 and -02 . . . . . . . . . .  17
     B.2.  Changes Between Revisions -00 and -01 . . . . . . . . . .  17
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .  18

1.  Introduction

   The NETCONF protocol [RFC6241] uses XML [W3C.REC-xml-20081126] for
   encoding data in its Content Layer.  Other management protocols might
   want to use other encodings while still benefiting from using YANG
   [RFC6020] as the data modeling language.

   For example, the RESTCONF protocol [I-D.ietf-netconf-restconf]
   supports two encodings: XML (media type "application/yang.data+xml")
   and JSON (media type "application/yang.data+json).

Lhotka                    Expires May 31, 2015                  [Page 2]
Internet-Draft         JSON Encoding of YANG Data          November 2014

   The specification of the YANG data modelling language [RFC6020]
   defines only XML encoding for data instances, i.e. contents of
   configuration datastores, state data, RFC input and output
   parameters, and event notifications.  The aim of this document is to
   define rules for encoding the same data as JavaScript Object Notation
   (JSON) text [RFC7159].

   In order to achieve maximum interoperability while allowing
   implementations to use a variety of available JSON parsers, the JSON
   encoding rules follow, as much as possible, the constraints of the
   I-JSON restricted profile [I-D.ietf-json-i-json].  Section Section 7
   discusses I-JSON conformance in more detail.

2.  Terminology and Notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   The following terms are defined in [RFC6020]:

   o  anyxml

   o  augment

   o  container

   o  data node

   o  identity

   o  instance identifier

   o  leaf

   o  leaf-list

   o  list

   o  module

   o  submodule

3.  Validation of JSON-encoded Instance Data

   Instance data validation as defined in [RFC6020] is only applicable
   to XML-encoded data.  For one, semantic constraints in "must"

Lhotka                    Expires May 31, 2015                  [Page 3]
Internet-Draft         JSON Encoding of YANG Data          November 2014

   statements are expressed using XPath 1.0 [W3C.REC-xpath-19991116],
   which can be properly interpreted only in the XML context.

   This document along with the corresponding "XML Mapping Rules"
   sections from [RFC6020] also define an implicit schema-driven mapping
   of JSON-encoded instances to XML-encoded instances (and vice versa).
   This mapping is mostly straightforward.  In cases where doubts could
   arise, this document gives explicit instructions for mapping JSON-
   encoded instances to XML.

   In order to validate a JSON instance document, it MUST first be
   mapped, at least conceptually, to the corresponding XML instance
   document.  By definition, the JSON document is then valid if and only
   if the XML document is valid according to the rules stated in
   [RFC6020].

4.  Names and Namespaces

   Instances of YANG data nodes (leafs, containers, leaf-lists, lists
   and anyxml nodes) are always encoded as members of a JSON object,
   i.e., as name/value pairs.  This section defines how the name part is
   formed, and the following sections deal with the value part.

   Except in the cases specified below, the member name is identical to
   the identifier of the corresponding YANG data node.  Every such name
   belongs to a namespace which is associated with the YANG module where
   the corresponding data node is defined.  If the data node is defined
   in a submodule, then the namespace is determined by the main module
   to which the submodule belongs.

   If the namespace of a member name has to be explicitly specified, the
   module name SHALL be used as a prefix to the (local) member name.
   Both parts of the member name SHALL be separated with a colon
   character (":").  In other words, the namespace-qualified name will
   have the following form:

           <module name>:<local name>

       Figure 1: Encoding a namespace identifier with a local name.

   Names with namespace identifiers in the form shown in Figure 1 MUST
   be used for all top-level YANG data nodes, and also for all nodes
   whose parent node belongs to a different namespace.  Otherwise, names
   with namespace identifiers MUST NOT be used.

   For example, consider the following YANG module:

Lhotka                    Expires May 31, 2015                  [Page 4]
Internet-Draft         JSON Encoding of YANG Data          November 2014

   module foomod {

     namespace "http://example.com/foomod";

     prefix "foo";

     container top {
       leaf foo {
         type uint8;
       }
     }
   }

   If the data model consists only of this module, then the following is
   a valid JSON-encoded configuration:

   {
     "foomod:top": {
       "foo": 54
     }
   }

   Note that the top-level container instance contains the namespace
   identifier (module name) but the "foo" leaf doesn't because it is
   defined in the same module as its parent container.

   Now, assume the container "top" is augmented from another module,
   "barmod":

   module barmod {

     namespace "http://example.com/barmod";

     prefix "bar";

     import foomod {
       prefix "foo";
     }

     augment "/foo:top" {
       leaf bar {
         type boolean;
       }
     }
   }

   A valid JSON-encoded configuration containing both leafs may then
   look like this:

Lhotka                    Expires May 31, 2015                  [Page 5]
Internet-Draft         JSON Encoding of YANG Data          November 2014

   {
     "foomod:top": {
       "foo": 54,
       "barmod:bar": true
     }
   }

   The name of the "bar" leaf must be prefixed with the namespace
   identifier because its parent is defined in a different module, hence
   it belongs to another namespace.

   Explicit namespace identifiers are sometimes needed when encoding
   values of the "identityref" and "instances-identifier" types.  The
   same form as shown in Figure 1 is then used as well.  See Sections
   6.8 and 6.11 for details.

5.  Encoding of YANG Data Node Instances

   Every complete JSON instance document, such as a configuration
   datastore content, is an object.  Its members are instances of all
   top-level data nodes defined by the YANG data model.

   Character encoding MUST be UTF-8.

   Any data node instance is encoded as a name/value pair where the name
   is formed from the data node identifier using the rules of Section 4.
   The value depends on the category of the data node as explained in
   the following subsections.

5.1.  The "leaf" Data Node

   A leaf instance is encoded as a name/value pair where the value can
   be a string, number, literal "true" or "false", or the special array
   "[null]", depending on the type of the leaf (see Section 6 for the
   type encoding rules).

   Example: For the leaf node definition

   leaf foo {
     type uint8;
   }

   the following is a valid JSON-encoded instance:

   "foo": 123

Lhotka                    Expires May 31, 2015                  [Page 6]
Internet-Draft         JSON Encoding of YANG Data          November 2014

5.2.  The "container" Data Node

   An container instance is encoded as a name/object pair.  The
   container's child data nodes are encoded as members of the object.

   Example: For the container definition

   container bar {
     leaf foo {
       type uint8;
     }
   }

   the following is a valid instance:

   "bar": {
     "foo": 123
   }

5.3.  The "leaf-list" Data Node

   A leaf-list is encoded as a name/array pair, and the array elements
   are values of the same type, which can be a string, number, literal
   "true" or "false", or the special array "[null]", depending on the
   type of the leaf-list (see Section 6 for the type encoding rules).

   The order of array elements MUST be the same as the order of XML
   elements representing leaf-list entries in the XML encoding.

   Example: For the leaf-list definition

   leaf-list foo {
     type uint8;
   }

   the following is a valid instance:

   "foo": [123, 0]

5.4.  The "list" Data Node

   A list instance is encoded as a name/array pair, and the array
   elements are JSON objects.

   The order of array elements MUST be the same as the order of XML
   elements representing list entries in the XML encoding.

Lhotka                    Expires May 31, 2015                  [Page 7]
Internet-Draft         JSON Encoding of YANG Data          November 2014

   Unlike the XML encoding, where list keys are required to precede any
   other siblings, and to appear in the order specified by the data
   model, the order of members within a JSON-encoded list entry is
   arbitrary because JSON objects are fundamentally unordered
   collections of members.

   Example: For the list definition

   list bar {
     key foo;
     leaf foo {
       type uint8;
     }
     leaf baz {
       type string;
     }
   }

   the following is a valid instance:

   "bar": [
     {
       "foo": 123,
       "baz": "zig"
     },
     {
       "foo": 0,
       "baz": "zag"
     }
   ]

5.5.  The "anyxml" Data Node

   An anyxml instance is encoded as a name/value pair.  The value can be
   of any valid JSON type, i.e. an object, array, number, string or one
   of the literals "true", "false" and "null".

   This document defines no mapping between the contents of JSON- and
   XML-encoded anyxml instances.  Note that the mapping is not needed
   for the purposes of validation (Section 3) because anyxml contents
   are not subject to YANG-based validation (see sec. 7.10 in
   [RFC6020]).

   Example: For the anyxml definition

   anyxml bar;

   the following is a valid instance:

Lhotka                    Expires May 31, 2015                  [Page 8]
Internet-Draft         JSON Encoding of YANG Data          November 2014

   "bar": [true, null, true]

6.  The Mapping of YANG Data Types to JSON Values

   The type of the JSON value in an instance of the leaf or leaf-list
   data node depends on the type of that data node as specified in the
   following subsections.

6.1.  Numeric Types

   A value of the "int8", "int16", "int32", "uint8", "uint16" and
   "uint32" is represented as a JSON number.

   A value of the "int64", "uint64" or "decimal64" type is encoded as a
   JSON string whose contents is the lexical representation of that
   numeric value as specified in sections 9.2.1 and 9.3.1 of [RFC6020].

   For example, if the type of the leaf "foo" in Section 5.1 was
   "uint64" instead of "uint8", the instance would have to be encoded as

   "foo": "123"

   The special handling of 64-bit numbers follows from I-JSON
   recommendation to encode numbers exceeding the IEEE 754-2000 double
   precision range as strings, see sec. 2.2 in [I-D.ietf-json-i-json].

6.2.  The "string" Type

   A "string" value encoded as a JSON string, subject to JSON encoding
   rules.

6.3.  The "boolean" Type

   A "boolean" value is mapped to the corresponding JSON literal name
   "true" or "false".

6.4.  The "enumeration" Type

   An "enumeration" value is mapped in the same way as a string except
   that the permitted values are defined by "enum" statements in YANG.
   See sec. 9.6 in [RFC6020].

6.5.  The "bits" Type

   A "bits" value is mapped to a JSON string identical to the lexical
   representation of this value in XML, i.e., space-separated names
   representing the individual bit values that are set.  See sec. 9.7 in
   [RFC6020].

Lhotka                    Expires May 31, 2015                  [Page 9]
Internet-Draft         JSON Encoding of YANG Data          November 2014

6.6.  The "binary" Type

   A "binary" value is mapped to a JSON string identical to the lexical
   representation of this value in XML, i.e., base64-encoded binary
   data.  See sec. 9.8 in [RFC6020].

6.7.  The "leafref" Type

   A "leafref" value is mapped according to the same rules as the type
   of the leaf being referred to.

6.8.  The "identityref" Type

   An "identityref" value is mapped to a string representing the name of
   an identity.  Its namespace MUST be expressed as shown in Figure 1 if
   it is different from the namespace of the leaf node containing the
   identityref value, and MAY be expressed otherwise.

   For example, consider the following schematic module:

   module exmod {
     ...
     import ietf-interfaces {
       prefix if;
     }
     import iana-if-type {
       prefix ianaift;
     }
     ...
     leaf type {
       type identityref {
         base "if:interface-type";
       }
     }
   }

   A valid instance of the "type" leaf is then encoded as follows:

   "type": "iana-if-type:ethernetCsmacd"

   The namespace identifier "iana-if-type" must be present in this case
   because the "ethernetCsmacd" identity is not defined in the same
   module as the "type" leaf.

Lhotka                    Expires May 31, 2015                 [Page 10]
Internet-Draft         JSON Encoding of YANG Data          November 2014

6.9.  The "empty" Type

   An "empty" value is mapped to "[null]", i.e., an array with the
   "null" literal being its only element.

   This encoding was chosen instead of using simply "null" in order to
   facilitate the use of empty leafs in common programming languages.
   When used in a boolean context, the "[null]" value, unlike "null",
   evaluates to true.

   Example: For the leaf definition

   leaf foo {
     type empty;
   }

   a valid instance is

   "foo": [null]

6.10.  The "union" Type

   A value of the "union" type is encoded as the value of any of the
   member types.

   Unlike XML, JSON conveys part of the type information already in the
   encoding.  When validating a value of the "union" type, this
   information MUST also be taken into account.

   For example, consider the following YANG definition:

   leaf bar {
     type union {
       type uint16;
       type string;
     }
   }

   In RESTCONF [I-D.ietf-netconf-restconf], it is fully acceptable to
   set the value of "bar" in the following way when using the
   "application/yang.data+xml" media type:

   <bar>13.5</bar>

   because the value may be interpreted as a string, i.e., the second
   member type of the union.  When using the "application/
   yang.data+json" media type, however, this is an error:

Lhotka                    Expires May 31, 2015                 [Page 11]
Internet-Draft         JSON Encoding of YANG Data          November 2014

   "bar": 13.5

   In this case, the JSON encoding indicates the value is supposed to be
   a number rather than string.

6.11.  The "instance-identifier" Type

   An "instance-identifier" value is encoded as a string that is
   analogical to the lexical representation in XML encoding, see
   sec. 9.13.3 in [RFC6020].  However, the encoding of namespaces in
   instance-identifier values follows the rules stated in Section 4,
   namely:

   o  The namespace identifier is the module name where each data node
      is defined.

   o  The encoding of a node name with an explicit namespace is as shown
      in Figure 1.

   o  The leftmost (top-level) node name is always prefixed with the
      namespace identifier.

   o  Any subsequent node name has the namespace identifier if and only
      if its parent node has a different namespace.  This also holds for
      node names appearing in predicates.

   For example,

   /ietf-interfaces:interfaces/interface[name='eth0']/ietf-ip:ipv4/ip

   is a valid instance-identifer value because the data nodes
   "interfaces", "interface" and "name" are defined in the module "ietf-
   interfaces", whereas "ipv4" and "ip" are defined in "ietf-ip".

   When translating an instance-identifier value from JSON to XML, the
   namespace identifier (YANG module name) in each component of the
   instance-identifier MUST be replaced by an XML namespace prefix that
   is associated with the namespace URI reference of the module in the
   scope of the element containing the instance-identifier value.

7.  I-JSON Compliance

   I-JSON [I-D.ietf-json-i-json] is a restricted profile of JSON that
   guarantees maximum interoperability for protocols that use JSON in
   their messages, no matter what JSON encoders/decoders are used in
   protocol implementations.  The encoding defined in this document
   therefore observes the I-JSON requirements and recommendations as
   closely as possible.

Lhotka                    Expires May 31, 2015                 [Page 12]
Internet-Draft         JSON Encoding of YANG Data          November 2014

   In particular, the following properties are guaranteed:

   o  Character encoding is UTF-8.

   o  Member names within the same JSON object are always unique.

   o  The order of JSON object members is never relied upon.

   o  Numbers of any type supported by YANG can be exchanged reliably.
      See Section 6.1 for details.

   The only two cases where a JSON instance document encoded according
   to this document may deviate from I-JSON were dictated by the need to
   be able to encode the same instance data in both JSON and XML.  These
   two exceptions are:

   o  Leaf values encoded as strings may contain code points identifying
      Noncharacters that belong to the XML character set (see sec. 2.2
      in [W3C.REC-xml-20081126]).  This issue is likely to be solved in
      YANG 1.1 because noncharacters will not be allowed in string
      values, see sec. 9.4 in [I-D.ietf-netmod-rfc6020bis].

   o  Values of the "binary" type are encoded with the base64 encoding
      scheme (Section 6.6), whereas I-JSON recommends base64url instead.
      Theoretically, values of the "binary" type might appear in URI
      references, such as Request-URI in RESTCONF, although in practice
      the cases where it is really needed should be extremely rare.

8.  Security Considerations

   This document defines an alternative encoding for data modeled in the
   YANG data modeling language.  As such, it doesn't contribute any new
   security issues beyond those discussed in sec. 15 of [RFC6020].

   JSON is rather different from XML, and JSON parsers may thus suffer
   from other types of vulnerabilities than their XML counterparts.  To
   minimize these security risks, it is important that client and server
   software supporting JSON encoding behaves as required in sec. 3 of
   [I-D.ietf-json-i-json].  That is, any received JSON data that violate
   any of I-JSON strict constraints MUST NOT be trusted nor acted upon.
   Violations due to the presence of Unicode Noncharacters in the data
   (see Section 7) SHOULD be carefully examined.

9.  Acknowledgments

   The author wishes to thank Andy Bierman, Martin Bjorklund, Balazs
   Lengyel, Juergen Schoenwaelder and Phil Shafer for their helpful
   comments and suggestions.

Lhotka                    Expires May 31, 2015                 [Page 13]
Internet-Draft         JSON Encoding of YANG Data          November 2014

10.  References

10.1.  Normative References

   [I-D.ietf-json-i-json]
              Bray, T., "The I-JSON Message Format", draft-ietf-json-
              i-json-03 (work in progress), August 2014.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC6020]  Bjorklund, M., "YANG - A Data Modeling Language for the
              Network Configuration Protocol (NETCONF)", RFC 6020,
              October 2010.

   [RFC6241]  Enns, R., Bjorklund, M., Schoenwaelder, J., and A.
              Bierman, "Network Configuration Protocol (NETCONF)", RFC
              6241, June 2011.

   [RFC7159]  Bray, T., "The JavaScript Object Notation (JSON) Data
              Interchange Format", RFC 7159, March 2014.

   [W3C.REC-xml-20081126]
              Bray, T., Paoli, J., Sperberg-McQueen, M., Maler, E., and
              F. Yergeau, "Extensible Markup Language (XML) 1.0 (Fifth
              Edition)", World Wide Web Consortium Recommendation REC-
              xml-20081126, November 2008,
              <http://www.w3.org/TR/2008/REC-xml-20081126>.

10.2.  Informative References

   [I-D.ietf-netconf-restconf]
              Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
              Protocol", draft-ietf-netconf-restconf-03 (work in
              progress), October 2014.

   [I-D.ietf-netmod-rfc6020bis]
              Bjorklund, M., "YANG - A Data Modeling Language for the
              Network Configuration Protocol (NETCONF)", draft-ietf-
              netmod-rfc6020bis-02 (work in progress), November 2014.

   [RFC7223]  Bjorklund, M., "A YANG Data Model for Interface
              Management", RFC 7223, May 2014.

Lhotka                    Expires May 31, 2015                 [Page 14]
Internet-Draft         JSON Encoding of YANG Data          November 2014

   [W3C.REC-xpath-19991116]
              Clark, J. and S. DeRose, "XML Path Language (XPath)
              Version 1.0", World Wide Web Consortium Recommendation
              REC-xpath-19991116, November 1999,
              <http://www.w3.org/TR/1999/REC-xpath-19991116>.

Appendix A.  A Complete Example

   The JSON document shown below represents the same data as the reply
   to the NETCONF <get> request appearing in Appendix D of [RFC7223].
   The data model is a combination of two YANG modules: "ietf-
   interfaces" and "ex-vlan" (the latter is an example module from
   Appendix C of [RFC7223]).  The "if-mib" feature defined in the "ietf-
   interfaces" module is considered to be active.

   {
     "ietf-interfaces:interfaces": {
       "interface": [
         {
           "name": "eth0",
           "type": "iana-if-type:ethernetCsmacd",
           "enabled": false
         },
         {
           "name": "eth1",
           "type": "iana-if-type:ethernetCsmacd",
           "enabled": true,
           "ex-vlan:vlan-tagging": true
         },
         {
           "name": "eth1.10",
           "type": "iana-if-type:l2vlan",
           "enabled": true,
           "ex-vlan:base-interface": "eth1",
           "ex-vlan:vlan-id": 10
         },
         {
           "name": "lo1",
           "type": "iana-if-type:softwareLoopback",
           "enabled": true
         }
       ]
     },
     "ietf-interfaces:interfaces-state": {
       "interface": [
         {
           "name": "eth0",
           "type": "iana-if-type:ethernetCsmacd",

Lhotka                    Expires May 31, 2015                 [Page 15]
Internet-Draft         JSON Encoding of YANG Data          November 2014

           "admin-status": "down",
           "oper-status": "down",
           "if-index": 2,
           "phys-address": "00:01:02:03:04:05",
           "statistics": {
             "discontinuity-time": "2013-04-01T03:00:00+00:00"
           }
         },
         {
           "name": "eth1",
           "type": "iana-if-type:ethernetCsmacd",
           "admin-status": "up",
           "oper-status": "up",
           "if-index": 7,
           "phys-address": "00:01:02:03:04:06",
           "higher-layer-if": [
             "eth1.10"
           ],
           "statistics": {
             "discontinuity-time": "2013-04-01T03:00:00+00:00"
           }
         },
         {
           "name": "eth1.10",
           "type": "iana-if-type:l2vlan",
           "admin-status": "up",
           "oper-status": "up",
           "if-index": 9,
           "lower-layer-if": [
             "eth1"
           ],
           "statistics": {
             "discontinuity-time": "2013-04-01T03:00:00+00:00"
           }
         },
         {
           "name": "eth2",
           "type": "iana-if-type:ethernetCsmacd",
           "admin-status": "down",
           "oper-status": "down",
           "if-index": 8,
           "phys-address": "00:01:02:03:04:07",
           "statistics": {
             "discontinuity-time": "2013-04-01T03:00:00+00:00"
           }
         },
         {
           "name": "lo1",

Lhotka                    Expires May 31, 2015                 [Page 16]
Internet-Draft         JSON Encoding of YANG Data          November 2014

           "type": "iana-if-type:softwareLoopback",
           "admin-status": "up",
           "oper-status": "up",
           "if-index": 1,
           "statistics": {
             "discontinuity-time": "2013-04-01T03:00:00+00:00"
           }
         }
       ]
     }
   }

Appendix B.  Change Log

   RFC Editor: Remove this section upon publication as an RFC.

B.1.  Changes Between Revisions -01 and -02

   o  Encoding of namespaces in instance-identifiers was changed.

   o  Text specifying the order of array elements in leaf-list and list
      instances was added.

B.2.  Changes Between Revisions -00 and -01

   o  Metadata encoding was moved to a separate I-D, draft-lhotka-
      netmod-yang-metadata.

   o  JSON encoding is now defined directly rather than via XML-JSON
      mapping.

   o  The rules for namespace encoding has changed.  This affect both
      node instance names and instance-identifiers.

   o  I-JSON-related changes.  The most significant is the string
      encoding of 64-bit numbers.

   o  When validating union type, the partial type info present in JSON
      encoding is taken into account.

   o  Added section about I-JSON compliance.

   o  Updated the example in appendix.

   o  Wrote Security Considerations.

   o  Removed IANA Considerations as there are none.

Lhotka                    Expires May 31, 2015                 [Page 17]
Internet-Draft         JSON Encoding of YANG Data          November 2014

Author's Address

   Ladislav Lhotka
   CZ.NIC

   Email: lhotka@nic.cz

Lhotka                    Expires May 31, 2015                 [Page 18]