Applicability Statement: The Use of the Routing Protocol for Low-Power and Lossy Networks (RPL) Protocol Suite in Home Automation and Building Control
draft-ietf-roll-applicability-home-building-12
Technical Summary
The purpose of this document is to provide guidance in the selection
and use of protocols from the RPL protocol suite to implement the
features required for control in building and home environments.
Working Group Summary
There has not been much discussion on the working group mailing list about
this document. Apart from a review by the shepherd, a review with a focus on
security has been carried out. In both cases the authors amended the
document to the reviewers' satisfaction. A further revision was made after AD
review.
Document Quality
The document is positioned as PS according to its classification as an
Applicability Statement according to RFC 2026. This gives rise to a long
list of downrefs that were called out in IETF last call.
An AS is not implemented, per se, but this document is written based on
the experience of a number of implementations.
Personnel
Yvonne-Anne Pignolet is the Document Shepherd.
Alvaro Retana is the Responsible AD.