In-situ OAM Direct Exporting
draft-ioamteam-ippm-ioam-direct-export-00
| Document | Type | Replaced Internet-Draft (ippm WG) | |
|---|---|---|---|
| Last updated | 2019-12-09 (latest revision 2019-10-12) | ||
| Replaced by | draft-ietf-ippm-ioam-direct-export | ||
| Stream | IETF | ||
| Intended RFC status | (None) | ||
| Formats |
Expired & archived
pdf
htmlized
bibtex
|
||
| Stream | WG state | Adopted by a WG | |
| Document shepherd | No shepherd assigned | ||
| IESG | IESG state | Replaced by draft-ietf-ippm-ioam-direct-export | |
| Consensus Boilerplate | Unknown | ||
| Telechat date | |||
| Responsible AD | (None) | ||
| Send notices to | (None) | ||
https://www.ietf.org/archive/id/draft-ioamteam-ippm-ioam-direct-export-00.txt
Abstract
In-situ Operations, Administration, and Maintenance (IOAM) is used for recording and collecting operational and telemetry information. Specifically, IOAM allows telemetry data to be pushed into data packets while they traverse the network. This document introduces a new IOAM option type called the Direct Export (DEX) option, which is used as a trigger for IOAM data to be directly exported to a collector without being pushed into in-flight data packets.
Authors
Haoyu Song
(haoyu.song@huawei.com)
Barak Gafni
(gbarak@mellanox.com)
Tianran Zhou
(zhoutianran@huawei.com)
Zhenbin Li
(lizhenbin@huawei.com)
Frank Brockners
(fbrockne@cisco.com)
Shwetha Bhandari
(shwethab@cisco.com)
Ramesh Sivakolundu
(sramesh@cisco.com)
Tal Mizrahi
(tal.mizrahi.phd@gmail.com)
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)