A Light Weight IOAM for SRv6 Network Programming
draft-li-spring-light-weight-srv6-ioam-00
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
|---|---|---|---|
| Authors | Cheng Li , Mach Chen , Stefano Previdi , Zhenqiang Li | ||
| Last updated | 2019-06-21 (Latest revision 2018-12-18) | ||
| RFC stream | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
In-situ OAM(IOAM) records OAM information within the packet while the packet traverses a particular network domain. A discussion of the motivation and requirements for in-situ OAM can be found in [I-D.brockners-inband-oam-requirements]. This document defines a light weight IOAM method for SRv6 network programming. In this method, IOAM information is carried in the data packet by the SIDs in the SRH.
Authors
Cheng Li
Mach Chen
Stefano Previdi
Zhenqiang Li
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)