YANG Data Model for Segment Routing
draft-litkowski-spring-sr-yang-01
| Document | Type |
Replaced Internet-Draft
(candidate for spring WG)
Expired & archived
|
|
|---|---|---|---|
| Authors | Stephane Litkowski , Yingzhen Qu , Jeff Tantsura | ||
| Last updated | 2015-10-14 (Latest revision 2015-06-23) | ||
| Replaced by | draft-ietf-spring-sr-yang | ||
| RFC stream | Internet Engineering Task Force (IETF) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Additional resources | Mailing list discussion | ||
| Stream | WG state | Call For Adoption By WG Issued | |
| Document shepherd | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-spring-sr-yang | |
| Consensus boilerplate | Unknown | ||
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document defines a YANG data model ([RFC6020]) for segment routing ([I-D.ietf-spring-segment-routing]) configuration and operation. This YANG model is intended to be used on network elements to configure or operate segment routing. This document defines also generic containers that SHOULD be reused by IGP protocol modules to support segment routing.
Authors
Stephane Litkowski
Yingzhen Qu
Jeff Tantsura
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)